Post on 15-Jun-2015
description
www.fiplex.comOffices
Fiplex Headquarters 7331 N.W. 54th StreetMiami, FL 33166 - USAPh +1 305.884.8991Fax +1 305.884.4041
M.E.Braun - FiplexS. Cabral 12425006 Córdoba , ArgentinaTel +54 351.456.8263 Fax +54 351.456.2507
Fiplex EuropeCalle Medes, 4-6, Local.08023 Barcelona. SpainPh: +34 93.551.9746
www.fiplex.com
• Local presence in USA, Europe and Latin
America
• Wide network of agents and distributors
• Customers in more than 40 countries - End
users and Manufacturers
• Standard and customized solutions
www.fiplex.com
Solutions
Two-Way Radio• Transmitter Combiners, Hybrid and Cavity types
• Ceramic Transmitter Combiners
• Receiver Multicouplers
• Duplexers
• Filters
• Low-Noise Amplifiers
• Intermodulation Control Panels – Isolators
• Tower-Mounted Amplifiers (TMA)
• Control Station Combiners
www.fiplex.com
Solutions
Coverage Extension• FM Unidirectional Amplifiers
• VHF Repeaters, Band Width Adjustable, and Channelized
• UHF and Tetra Repeaters, Band Selective, Adjustable, and Channelized
• 700/800/900MHz Public Safety Repeaters, Band Selective and
Channelized
• Cellular Repeaters
• Fiber DAS Solutions
• Multiband Combiners (POI)
• Splitters and Couplers
• Antennas
www.fiplex.com
Solutions
Broadcast• FM Combiners, Star Point and Constant Impedance
• TV Combiners, Star Point and Constant Impedance
• TV Diplexers
• DTV Combiners, 2:1, 3:1 and 4:1
• DTV Filters
• DTV Gapfillers
www.fiplex.comSome of our Customers
• Telcel Mexico
• Nextel International (Argentina, Peru, Mexico,
Brazil)
• CLARO (Argentina, Brazil, Uruguay, Chile, Paraguay,
Guatemala, El Salvador)
• Movistar (Argentina, Uruguay, Chile, Peru, Mexico,
Colombia)
www.fiplex.comSome of our Partners
• Nokia
• Siemens
• Huawei
• Ericsson
• Alcatel-Lucent
• Shyam Telecom
www.fiplex.comSome of our Partners
• Commways
• Bird Corporation
• Comba Telecom
• Radiotrans
• Novatel
• Progrescomm
www.fiplex.com
• From VHF to 960MHz
• 700MHz band available
• Tx to Tx separations:• 150KHz in VHF
• 200KHz in UHF
• 250KHz in 800MHz
• 184mm OD cavity
• Simple and Dual junction isolators
• Up to 150W per channel
• Field expandable up to 40 channels
• Wide temperature range, from -40 to +70C
• Rack mounting
Cavity Ferrite Tx Combiners
www.fiplex.com
• Dielectric (ceramic) resonator technology• Low loss
• Small footprint, less rack space required
• 700 and 800MHz band available• UHF band available Q3 2011• Minimum Tx to Tx separation of 150KHz• Dual junction isolators• Up to 125W per channel• Built-in direct and reflected test ports for easy field re-tuning• Field expandable up to 40 channels• Wide temperature range, from -10 to +50C• Rack mounting, up to 4 channels in 3 RU
Ceramic Tx Combiners
www.fiplex.com
• From VHF to 960MHz• 700MHz band available• Adjacent channel separation• Zero spacing applications• Wilkinson configuration – improved isolation• Simple and dual junction isolators• Up to 150W per channel• 2, 4, 6 and 8 channel versions• Monolithic design• Wide temperature range, from –40 to +70C• Rack mounting
Hybrid Ferrite Tx Combiners
www.fiplex.com
• With or without isolators• Single, dual, and triple configurations• Models:
• Triple 2:1
• Dual 3:1
• Single 4:1
• Single 6:1
• Single 8:1
• Up to 100W per channel• Monolithic design• Wide temperature range, from –40 to +70 C• Compatible with iDEN Racks
Compact Hybrid Ferrite Tx Combiners
www.fiplex.com
• From VHF to 960MHz.• Combine base station, mobile, or portable
radios with single Tx/Rx antenna connector• Up to 150W per channel• High port-to-port isolation• Rx path adjustable gain• Monolithic design• Wide temperature range, from –40 to +70C
Control Station Combiners
www.fiplex.com
• From VHF to 960MHz• 700/800MHz dual band available• UHF dual band pass input preselector
available• Input preselector included• LNA with adjustable gain• High linearity• 4, 8, 16 and 24 - output versions• Wide temperature range, from –40 to +70C• Rack mounting• Tower-top versions available (TRC Series)
Receiver Multicouplers
www.fiplex.com
• Band pass – band reject• From 25 to 1300MHz• 150W Continues Waves• Low insertion loss, high rejection• Rack mounting• Wide temperature range, -40C to
+70C• INVAR tuning rods• Coaxial type
Base Station Duplexer
www.fiplex.com
• Band pass – band reject• VHF and UHF• 150W Continues Waves• Suitable for portable/mobile
repeaters• Low insertion loss, high rejection• Rack mounting• Wide temperature range, -40C to
+70C• Helical and Coaxial types
Compact Base Station Duplexer
www.fiplex.com
• Low band compact design, only 2RU
• Band pass – band reject• 25 to 55MHz• 150W Continues Waves• 800KHz minimum Tx to Rx
separation• Low insertion loss, high rejection• Rack mounting• Wide temperature range, -40C to
+70C• Helical type
Low-Band Compact Base Station Duplexer
www.fiplex.com
• Full band-pass design• 380, 450, 700, 800 and 900MHz bands• 500W Continues Waves• Low insertion loss, low ripple• Rack mounting• Wide temperature range, -40C to +70C• Rx diversity available• Window coupled – elliptic topology
Dual Band-Pass Duplexers
www.fiplex.com
• VHF up to 960MHz• Band-Reject type• Coaxial and Helical• Medium Power (50W Continues Waves)• Low Insertion loss and High isolation• Repeater Compatible.• Wide Temperature Range, from -40 to
+80 C• N, BNC, and TNC connectors
Mobile Duplexers
www.fiplex.com
• Full band pass• From 25 to 1300MHz• Single carrier to 200KHz BW• Up to 250W Continues Waves• Low insertion loss• Rack mounting• Wide temperature range, -40C to
+70C• INVAR tuning rods• Single and multiple cavity• Coaxial design
Band-Pass Filters (Narrow Band)
www.fiplex.com
• Full band-pass design• 380, 450, 700, 800 and 900MHz bands• 5 to 30MHz BW• Up to 500W Continues Waves• Low insertion loss, low ripple• Rack mounting• Wide temperature range, -40C to +70C• Rx diversity available• Window coupled – elliptic topology
Band Pass Filters (Preselectors)
www.fiplex.com
• 380, 450, 700, 800 and 900MHz bands• Dual duplexed (Tx/Rx) and Rx only
versions• Low noise• High linearity• LNA fail-safe bypass• Up to 500W Continues Waves• Low Tx insertion loss• IP67 weatherproof enclosure• Wide temperature range, -40C to +70C
Tower-Mounted Amplifiers
www.fiplex.com
• High-Power Bias Tees• Low IMD• All BTS compatible• DIN 7/16 & N
• 6 TMAs PDU (complete site)• Negative – Positive DC Supply• All OEMs BTS compatible• Programmable Alarms output• Compact size (1 U)
Tower-Mounted Amplifiers Accessories
www.fiplex.com
• HF up to 2500 MHz• Low-noise figure• Adjustable gain• Wide temperature range, from –40 to +70 C
Low-Noise Amplifiers
www.fiplex.comPower Splitters
• 2, 3 and 4-way• High-power handling capability up to
500W• From VHF to 2500MHz• 800-2500MHz broadband models• Low insertion loss• Low PIM, 160dBc typ• Indoor and outdoor versions• N(f) and 7/16(f) connectors
www.fiplex.com
• HF to 2700 MHz, in subbands• Low insertion loss• High port-to-port isolation• Hybrid design, low ripple• Wide temperature range, from –40 to +70 C• N and 7/16 type connectors
Power Splitters / Combiners
www.fiplex.comMulti-Band Combiners
• Broadband response• To combine HF, FM, VHF, TETRA, UHF, LTE700/800, PS700/800, 850,
900, GSM-R, DCS, UMTS, AWS and LTE2.6• Single and multiple output ports• Indoor or outdoor versions• Rack or Wall mount• N(f) connectors• Up to 100W per input port
www.fiplex.com
• VHF up to 2700 MHz• Low insertion loss• 6, 10, 15, 20 and 30dB coupling values• Wide temperature range, from –40 to +70 C• N type connectors
RF Directional Couplers
www.fiplex.com
• VHF up to 2200 MHz• Simple and dual-junction• From 125W input power• Wide temperature range, from –40 to +70 C• Broadband design• N type• Available as Intermodulation Control Panels
Ferrite Isolators
www.fiplex.comBroadband Splitters
• 2, 3 and 4-way• Power handling capability of 50W• 700-2700MHz broadband models• Low insertion loss• Low PIM, 160dBc typ• Indoor versions• N(f) type connectors
www.fiplex.comRF Directional Couplers
• 6, 10, 15, 20 and 30dB-coupling values• High-power handling capability up to 200W• From VHF to 2700MHz• 800-2500MHz broadband models• Low insertion loss• Low PIM, 160dBc typ• Outdoor use• N(f) and 7/16(f) connectors
www.fiplex.comFiber DAS Solutions
Fiber DAS systems from FIPLEX offer a wide band “RF over Fiber” solution that exceeds
the need for indoor and outdoor wide area coverage for any type of telecommunications
system in the ranges between 50MHz to 2700MHz.
The design of Fiplex’ DAS system was done based on the needs of the industry: robust
architecture, flexibility, expandability, remote control…among others.
Its wide band design, along with high linearity and low noise allows multiple systems to
run in parallel, capable of handling any
mixture of analog and digital systems.
www.fiplex.comFiber DAS Architecture
The architecture of the Fiplex Fiber DAS solution is composed of Point of Interconnection
modules (POI), which is the I/O point for the BTS, the Matrix Distribution Unit (MDU), that
combines all the conformed signals, the Master Optical Unit (MOU) which converts RF to
light and provides the overall DAS control and management, and the Radio Head Units
(RHU) that provides the RF coverage into the service areas.
DAS topology is based on a STAR configuration where all the RHUS are directly
connected to the MOU using a single mono
mode fiber optic link up to 20Kms in length. Thanks
to the built-in Wavelength Division Multiplexers
(WDM) there is no need to use two separate fiber
optic links, a single one handles DL and UL
simultaneously.
www.fiplex.comWiFi Integration
Fiplex DAS features WiFi integration, which allows the radiation of WiFi signals in 2.4GHz
inside the coverage area, taking profit of the indoor antennas network.
Integration can be done in two different ways:
• At the MOU
• At each RHU
Integrating WiFi at the MOU allows the DAS operator to place all the Access Points
together at the MOU location, while integrating WiFi at the RHU allows the DAS operator to
use already installed AP without the need of relocating them.
www.fiplex.com
Point of Interconnection (POI)
Fiplex POIs are band-specific units designed to receive all the signals that are being
handled by the DAS. POI separates UL and DL bands, providing power treatment per
band and per link, with level adjustment capability, to allow an homogeneous network
planning.
POI tray is only 1RU, on single configuration for VHF, UHF, PS 700MHz and PS 800MHz,
and twin configuration (diversity) and MIMO configuration for all cellular bands.
Equipped with AGC and overload function, POI
is capable of reporting alarms to the Network
Manager.
Expandability is simple, just by adding as many
POI as needed.
www.fiplex.com
Point of Interconnection (POI)
Features• Available per band, from VHF to LTE 2.6GHz.
• 25dB of AGC range, to keep output signal levels within specified values.
• User adjustable gain, per link and per diversity, 0 to 18dB.
• Low profile, takes only 1 RU.
• Mid power (+18dBm) and High power (+36dBm) inputs, for BDA and BTS connections.
• Alarm outputs.
• AC and DC inputs for NFPA compliance
• Models:
• POI1H, VHF, +36dBm input power, single
• POI4H, UHF, +36dBm input power, single
• POI7L, PS 700MHz, +18dBm input power, single
• POI8L, PS 800MHz, +18dBm input power, single
• POI6L, LTE A,B, +18dBm input power, twin
• POI6L-M, LTE A,B, +18dBm input power, twin MIMO
• POILL-M, LTE C, +18dBm input power, twin MIMO
• POILL, LTE C, +18dBm input power, twin
• POILL-M, LTE C, +18dBm input power, twin MIMO
• POICL, 850MHz, +18dBm input power, twin
• POIAL, AWS, +18dBm input power, twin
• POIPL, PCS, +18dBm input power, twin
www.fiplex.com
Matrix Distribution Unit (MDU)
Fiplex MDU is a broadband low loss high isolation combination device that provides the
capability of making different combinations in order to connect the different POIs with the
MOU.
Built in on a 1 RU tray, provides all the necessary combinations to handle up to 8 different
bands or POIs, and to feed up to 64 remotes thru 8 MOUs.
Two versions are available, low band (from 50MHz to 869MHz)
and high band (from 698MHz to 2690MHz).
www.fiplex.com
Matrix Distribution Unit (MDU)Features
• Two versions available, low band (50 to 869MHz) and high band (698 to 2690MHz).
• Single inventory item to obtain a wide variety of combinations.
• Fully passive, very high MTBF.
• Low profile, takes only 1 RU.
• +18dBm input power per port.
• SMA connectors.
• A single MDU an feed up to 64 RHUs
• Models:
• MDU1001, Low Band
• MDU2001, High Band
www.fiplex.comMaster Optical Unit (MOU)
Fiplex MOU is a broadband device that converts the RF received, from the different BTS
and/or Donor BDAs, into light in the DL direction, and converts the light into RF in the UL
direction. It acts as a single I/O point for the entire Fiber DAS, with the capability of
handling signals from 50Mhz to 2700MHz with high dynamic range and low noise. Not
only can BDA’s and BTS’s be connected to the MOU, but it also supports MIMO
applications.
All the DAS components (MOU and RHUs) can be
locally and remotely controlled thru the MOU, via
Ethernet or GPRS. Additional alarm outputs are
available (LEDs and Dry Contacts).
www.fiplex.com
• Broadband, 50MHz to 2.7GHz.
• 1310 and 1550uM, with built in WDM included.
• Capable of handling analog and digital signals (like LTE, WCDMA, GSM, P25, TETRA, Mototrbo…)
• Automatic adjustment of FO link losses
• Independent gain adjustment per RHU
• Alarm outputs and DC backup input for redundancy (NFPA)
• Connection to BTS, BDAs. Supports MIMO.
• Local and Remote control capability for MOU and RHU
• From 1 to 8 FO links as standard.
• Models:• MOU1x, replace “x” by optical outputs
Master Optical Unit (MOU)Features
www.fiplex.comMOU - Available models
Model number Number of RF Tx ports Number of RF Rx ports Optical I/O ports
MOU11 1 1 1
MOU12 1 1 2
MOU13 1 1 3
MOU14 1 1 4
MOU15 1 1 5
MOU16 1 1 6
MOU17 1 1 7
MOU18 1 1 8
MOU "X" "Y" (*) Replace X for value Replace X for value Replace Y for value
(*): Custom configuration, available upon request
www.fiplex.comRemote Head Units (RHU)
Fiplex RHUs are band specific devices that receive the RF over fiber from the MOU and
convert to RF in order to provide coverage for the service area. With the addition of
external combiners, multi-band applications can be provided.
Covering from FM to LTE 2.6GHz, RHUs feature band selective response with manual
gain adjustment and AGC.
Units are provided in IP65/NEMA 4 cabinets, and have DC input power for battery
backup, as well as I/O alarm ports, making them NFPA compliant for Public Safety.
RHUs can be locally controlled via USB or via MOU, and
can be remotely controlled thru the MOU.
www.fiplex.comRemote Head Units (RHU)
Features
• Available for FM, VHF, UHF, 700/800Mhz, Cell 850, GSM 900, DCS, PCS, UMTS, AWS and all LTE band
• Single and Dual band units, with capability of interconnection for multiband applications
• One single mode fiber, WDM built in
• From +18dBm to 37dBm output power
• Indoor and Outdoor cabinets
• Redundant FO link available as optional
• Management and configuration via USB or thru the MOU
• Battery backup and alarm outputs (NFPA)
• Fullband and BW adjustable models
www.fiplex.comControl and Supervision
The entire DAS from Fiplex, including MOU and RHUs can be
locally and remotely programmed; controlled using SNMP protocol
via Ethernet or GPRS links.
Remote control is done thru the MOU, this way the Network
Operator has a single contact point instead of having to worry
about multiple connections to each DAS component. The MOU is
capable of not only handling parameters and alarms, but also
connecting all the RHUs. For site maintenance purposes, local
connection to the RHU can be done via USB. This helps the field
technicians do field adjustments and system calibrations, while all
local changes are reported to the MOU for a coordinated system
control.
www.fiplex.comRHU - Available models
Model number Frequency BandDownlink Composite Power, in
dBm
HRHU-F FM 40
HRHU-1 VHF 40
MRHU-3 UHF 18
HRHU-3 UHF 32
MRHU-4 UHF 24
HRHU-4 UHF 37
MRHU-L LTE 700 24
HRHU-L LTE 700 32
MRHU-8 LTE 800 24
HRHU-8 LTE 800 37
MRHU-7 PS 700 24
HRHU-7 PS 700 37
MRHU-S PS 800 24
HRHU-S PS 800 37
HRHU-4S UHF & PS 800 20 in UHF & 30 in PS800
MRHU-7S PS 700 & 800 21 per band
MRHU-7S PS 700 & 800 34 per band
HRHU-C Cel 850 37
HRHU-P PCS 37
HRHU-CP Cel 850 & PCS 37 per band
HRHU-A AWS 37
MRHU-2 LTE 2.6 24
HRHU-2 LTE 2.6 32
www.fiplex.comRHU - Available models
Model number Frequency BandDownlink Composite Power, in
dBm
MRHU-E EGSM 24
HRHU-E EGSM 32
MRHU-D DCS 24
HRHU-D DCS 32
MRHU-U UMTS 2.1 24
HRHU-U UMTS 2.1 37
MRHU-2 LTE 2.6 24
HRHU-2 LTE 2.6 32
www.fiplex.comFOMS – O&M Software
• Model: FOMS
• FIPLEX OMS: DAS & BDA Administrator System & Control System.
• Real-time.
• Server – client.
• Parameters and alarms.
• Via SMS / packet data.
• Treeview.
• SQL database engine.
• Individual users profiles, permissions.
• Remote control for MOU and RHU
• SNMP protocol
• Ethernet and GPRS
www.fiplex.comIndoor Omni Antenna
• Dome type• Indoor roof mount• 690 – 2700MHz• 3dBi gain• Vertical polarization, 55 degrees• N(f) connectors• Maximum power 100W
www.fiplex.comIndoor Panel Antenna
• Panel type• Indoor wall mount• 690 – 2700MHz• 8dBi gain• Vertical polarization, 58 degrees• Horizontal aperture 68 degree• Front – Back ratio 15dB min• N(f) connectors• Maximum power 100W
www.fiplex.comOutdoor Panel Antenna
• Panel type• Wall and pipe mount• 690 – 2700MHz• 7dBi gain• Vertical polarization, 58 degrees• Horizontal aperture 87 degree• Front – Back ratio 20dB min• Outdoor type• N(f) connectors• Maximum power 50W
www.fiplex.comYagi Antenna
• Yagi type with radome cover• Pipe mount (40-50mm)• Aluminum alloy, welded• 690 – 2700MHz• 11dBi gain• Vertical polarization, 50 degrees• Horizontal aperture 90 degree• Front – Back ratio 25dB min• Outdoor type• N(f) connectors• Maximum power 100W
www.fiplex.comFiplex Repeaters Overview• Complete line to cover requirements from a single office to large in-
building systems • Available for:
– FM– VHF – UHF: TETRA, P25, IDAS, Mototrbo, MPT, LTR, CDMA450,…– SMR & Public Safety 700, 800 and 900– Cellular 850 and PCS– GSM and EGSM: GMS, WCDMA, GSM-R– DCS: GSM, WCDMA– PCS: GSM, CDMA, WCDMA– UMTS– AWS– LTE
• Band selective and channel selective• In-building and outdoor applications• Fiber optic links• Complete line of accessories for in-building
www.fiplex.comRepeaters for FM
• Unidirectional Amplifiers for indoor coverage of FM signals.• Band Selective and Channel Selective versions.• FM Break In as optional for local SOS broadcasted messages over FM channels.• AGC and Overload protection.• Antenna isolation control.• Outdoor cabinet. • Remote control capability (option RC-G).• Fiber Feed capability (option FO-CT).• Band Selective models:
• MF24V• HF30V• HF40V
• Channelized models:• MF24Cx (replace “x” by channels qty)• HF40Cx (replace “x” by channels qty)
www.fiplex.comRepeaters for VHF
• Repeater for Large size applications.• Single band.• 2MHz BW (SW adjustable).• 5MHz min Tx to Rx separation.• +30dBm and +40dBm output power.• 80dB gain adjustable.• AGC and Overload protection.• Outdoor cabinet.• Remote control capability (option RC-G).• Fiber Feed capability (option FO-CT).• Model:
• H130V• H140V
www.fiplex.comLow Power Repeaters
• For P25, TETRA, IDAS, Mototrbo, Nexedge, MPT, CDMA450 and others.• Repeater for Small and Medium size. applications.• Single band as standard, multiband as optional.• 2MHz and 5MHz BW (SW adjustable).• 5MHz and 10MHz split.• +18dBm and +24 dBm output power.• 70dB gain adjustable.• AGC and Overload protection.• Antenna isolation control.• Outdoor cabinet.• Remote control capability (option RC-G).• Fiber Feed capability (option FO-CT).• Band Selective models:
• M318V – meets ETSI, +18dBm• M424V – meets FCC, +24dBm
www.fiplex.comHigh Power Repeaters
• For P25, TETRA, IDAS, Mototrbo, Nexedge, MPT, CDMA450 and others.• Repeater for Large size applications, indoor and outdoor.• Single band as standard, multiband as optional.• 2MHz and 5MHz BW (SW adjustable).• 5MHz and 10MHz split.• +36dBm and +37 dBm composite output power.• 80dB gain adjustable.• AGC and Overload protection.• Antenna isolation control.• Outdoor cabinet.• Remote control capability (option RC-G).• Fiber Feed capability (option FO-CT).• Band Selective models:
• H336V – meets ETSI, +36dBm• H437V – meets FCC, +37dBm
www.fiplex.comHigh Power Channel
Selective Repeaters for UHF• For P25, TETRA, IDAS, Mototrbo, Nexedge, MPT, CDMA450 and others.• Repeater for Large size applications, indoor and outdoor.• From 2 channels and up.• 50KHz BW.• +36 dBm.• 85dB gain adjustable.• AGC and Overload protection.• Antenna isolation control.• Outdoor cabinet.• Remote control capability (option RC-G).• Fiber Feed capability (option FO-CT).• Band Selective models:
• H436Cx (replace “x” by channels number) – meets ETSI & FCC
www.fiplex.comRepeaters for 700/800MHz
Applications
• Single and Dual Band versions• SOHO applications:
• P Series, single band
• Medium Size applications:• C Series, single band• C Series for dual band applications
• Large Size applications:• Band selective, single and dual band• Channel Selective, single and dual band
• NFPA Compliant:• Band selective, single and dual band
www.fiplex.comP Series, +10dBm
• Repeater for SOHO applications.• Single band (700 or 800MHz).• Band Selective (SAW filtered):
• Full band• Narrow band: center frequency USB adjusted
• 65dB gain adjustable & +10dBm output power.• RSSI and Feedback indicators.• AGC and Overload protection.• Indoor cabinet.• Compatible with analog, P25, Tetra, MPT, Passport, and others.• Models:
• P710, for PS 700MHz• PS10, for PS 800MHz
www.fiplex.comC Series, +20dBm
• Repeater for Medium Size applications.• Single band (700 or 800MHz).• Band Selective (SAW filtered):
• Full band• Narrow band: center frequency USB adjusted
• 70dB gain adjustable & +20dBm output power.• RSSI and Feedback indicators.• AGC and Overload protection.• Indoor cabinet.• Compatible with analog, P25, Tetra, MPT, Passport, and others.• Remote control capability (option RC-G).• DAS Fiber Feed capability (option FO-CT).• Models:
• C720, for PS 700MHz• CS20, for PS 800MHz
www.fiplex.comDual Band - CBDA Series
• Repeater for Medium Size applications.• Dual band (700 & 800MHz).• Band Selective (SAW filtered):
• Full band• Narrow band: center frequency USB adjusted
• 70dB gain adjustable & +17dBm output power per band.• RSSI and Feedback indicators.• AGC and Overload protection.• Indoor cabinet.• Compatible with analog, P25, Tetra, MPT, Passport, and others.• Remote control capability (option RC-G).• DAS Fiber Feed capability (option FO-CT).• Models:
• C7S20, for PS 700MHz & 800MHz
www.fiplex.comHigh Power BDA –
Band Selective• Repeater for Large Size applications.• Single band (700 or 800MHz).• Band Selective (SAW filtered):
• Full band• Narrow band: center frequency USB adjusted
• 80dB gain / 30dBm output power.• RSSI and Feedback indicators.• AGC and Overload protection.• Indoor cabinet.• Compatible with analog, P25, Tetra, MPT, Passport, and others.• Remote control capability (option RC-G).• DAS Fiber Feed capability (option FO-CT).• Models:
• H730, for PS 700MHz• HS30, for PS 800MHz
www.fiplex.comDual Band – High Power BDA – Band Selective
• Repeater for Large Size applications.• Dual band (700 & 800MHz).• Band Selective (SAW filtered):
• Full band• Narrow band: center frequency USB adjusted
• 80dB gain / 27dBm output power per band.• RSSI and Feedback indicators.• AGC and Overload protection.• Outdoor cabinet.• Compatible with analog, P25, Tetra, MPT, Passport, and others.• Remote control capability (option RC-G).• DAS Fiber Feed capability (option FO-CT).• Models:
• H7S30, for PS 700MHz & PS 800MHz
www.fiplex.comBDA High Power – BW
Adjustable• Repeater for Large Size applications.• Single band (700 or 800MHz) and Dual band (700 & 800MHz).• Band Selective (SAW filtered):
• Single band pass, software adjustable
• 80dB gain / 37dBm output power.• Antenna isolation control.• RSSI and Feedback indicators.• AGC and Overload protection.• Outdoor cabinet.• Compatible with analog, P25, Tetra, MPT, Passport, and others.• Remote control capability (option RC-G).• DAS Fiber Feed capability (option FO-CT).• Models:
• H737V, for PS 700MHz• HS37V, for PS 800MHz• H7S37V, for PS 700MHz and PS800MHz
www.fiplex.com
• Repeater for Large Size applications.• Single band (700 or 800MHz) and Dual band (700 & 800MHz).• Repeater for Large size applications, indoor and outdoor.• From 2 channels and up.• 50KHz BW.• +37 dBm.• 85dB gain adjustable.• AGC and Overload protection.• Antenna isolation control.• Outdoor cabinet.• Remote control capability (option RC-G).• Fiber Feed capability (option FO-CT).• Channel Selective models:
• H737C-x - For PS 700MHz, replace “x” by number of channel selective filters• HS37C-x - For PS 800MHz, replace “x” by number of channel selective filters• H7S37C-xy - For PS 700MHz & PS 800MHz, replace “x & y” by number of channel selective filters
BDA Series – Channel Selective
www.fiplex.comBDA High Power – NFPA Compliant
• For Firefighters applications, fully NFPA compliant.• Single band (700 or 800MHz) and Dual band (700 & 800MHz).• RAL3000 according to NFPA code.• Band Selective (SAW filtered):
• Single band pass, software adjustable
• 80dB gain / 37dBm output power.• Antenna isolation control, RSSI and Feedback indicators.• AGC and Overload protection.• Outdoor cabinet.• Compatible with analog, P25, Tetra, MPT, Passport, and others.• Remote control capability (option RC-G).• DAS Fiber Feed capability (option FO-CT).• Models:
• H737VF, for PS 700MHz• HS37VF, for PS 800MHz• H7S37VF, for PS 700MHz and PS800MHz
www.fiplex.comRepeaters for Cellular
Applications
• From LTE 700MHz to LTE 2.6GHz• SOHO applications:
• P Series
• Medium Size applications:• C Series
• Large Size applications:• H Series – Band selective• H Series – Channel Selective
• Leaky cable applications:• IB Series
www.fiplex.comP Series, +10dBm
• Repeater for SOHO applications.• Single band.• Band Selective (SAW filtered):
• Full band• Narrow band: center frequency USB adjusted
• 65dB gain adjustable & +10dBm output power.• RSSI and Feedback indicators.• AGC and Overload protection.• Indoor cabinet.• For LTE 700, LTE 800, 850MHz, EGSM, DCS, PCS, UMTS, AWS, LTE 2600• Compatible GSM, CDMA, WCDMA, 1X, HSDPA, GPRS/EDGE, LTE• Models:
• P610, for LTE 700MHz A,B• PL10, for LTE 700MHz C• PC10, for 850MHz• P810, for LTE 700MHz 800• PE10, for EGSM 900
• PD10, for DCS• PP10, for PCS• PA10, for AWS• PU10, for UMTS 2100• P210, for LTE 2600
www.fiplex.comC Series, +18/+20dBm
• Repeater for Medium Size applications.• Single band.• Band Selective (SAW filtered):
• Full band• Narrow band: center frequency USB adjusted
• 70dB gain adjustable & +18/+20dBm output power.• RSSI and Feedback indicators.• AGC and Overload protection.• Remote controlled as optional• Indoor cabinet.• For LTE 700, LTE 800, 850MHz, EGSM, DCS, PCS, UMTS, AWS, LTE 2600• Compatible GSM, CDMA, WCDMA, 1X, HSDPA, GPRS/EDGE, LTE• Models:
• C620, for LTE 700MHz A,B• PL20, for LTE 700MHz C• PC20, for 850MHz• P820, for LTE 700MHz 800• PE18, for EGSM 900
• PD18, for DCS• PP20, for PCS• PA20, for AWS• PU20, for UMTS 2100• P218, for LTE 2600
www.fiplex.comBDA Series – Band Selective
• Repeater for Large Size applications.• Single band as standard, multiband as optional.• Band Selective (SAW filtered):
• Single band pass, software adjustable• Dual band pass, fix BW and center frequency adjustable
• 70dB gain / 24dBm output power.• 80dB gain adjustable & +30/+37dBm output power.• RSSI and Feedback indicators.• AGC and Overload protection.• Indoor and Outdoor versions.• For LTE 700, LTE 800, 850MHz, EGSM, DCS, PCS, UMTS, AWS, LTE 2600• Compatible GSM, CDMA, WCDMA, 1X, HSDPA, GPRS/EDGE, LTE• Remote control capability (option RC-G).• DAS Fiber Feed capability (option FO-CT).
www.fiplex.com
BDA Series – Channel Selective
• Repeater for Large Size applications.• Single band.• Channel Selective (SAW filtered):
• 4 and 8 channels• 200KHz, 1.25MHz, 5MHz and 10MHz BW• Mix of filters BW for hybrid/multi technology systems
• 80dB gain adjustable & +37dBm output power.• RSSI and Feedback indicators.• AGC and Overload protection.• Outdoor cabinet.• For LTE 700, LTE 800, 850MHz, EGSM, DCS, PCS, UMTS, AWS, LTE 2600• Compatible GSM, CDMA, WCDMA, 1X, HSDPA, GPRS/EDGE, LTE• Remote control capability (option RC-G).• DAS Fiber Feed capability (option FO-CT).
www.fiplex.comIB Series – Line Amplifiers
• For long runs and leaky cable systems• Compensation of cable loss• Single band, fullband.• +20dBm output power• 30dB gain adjustable• RSSI indicator.• AGC and Overload protection.• Indoor cabinet.• For LTE 700, LTE 800, 850MHz, EGSM, DCS, PCS, UMTS, AWS, LTE 2600• Compatible GSM, CDMA, WCDMA, 1X, HSDPA, GPRS/EDGE, LTE
www.fiplex.comFiplex O&M Software - FOMS
• DAS and BDA administrator system and control system
• Real-time
• Client-server
• Parameters and alarms
• Via SMS / packet data
• Treeview
• SQL database engine
• Individual users profiles, permissions
• Remote control for MOU and RHU
• SNMP protocol
• Ethernet and GPRS
www.fiplex.comRemote Control Unit – option RC-G
• Option for remote supervision of repeaters and master optical units (MOU)• Repeater alarms reports• Link via GSM network• Proprietary protocol• Factory installed• Works with Fiplex Operation and Maintenance System software• Applies for all lines of repeaters and MOUs• Not compatible with SOHO nor ultra compact repeaters
www.fiplex.comFM Combiners
• FM Combiners, star point and constant
impedance
• Up to 10KW per channel as standard
• Up to 4 channels in star-point configuration
• From 2 channels and up in constant-
impedance configuration
• Low insertion loss
• High thermal stability
• High Tx to Tx isolation
www.fiplex.comFM Filters
• Up to 10KW per channel as standard
• Up to 50KW upon request
• Dual and triple cavities configurations
• Low insertion loss
• High out-of-band rejection
• High thermal stability
www.fiplex.comTV Combiners - Star Point
• Low power up to 50W per channel
• High power up to 10KW per channel as standard
• Up to 4 channels in star-point configuration
• Critical and non-critical masks for DVB, ISDB-T and
ATSC
• Low insertion loss, low group delay distortion
• High thermal stability
www.fiplex.comTV Combiners Constant Impedance
• Low power up to 50W at narrow port and 250W at wide
port
• High power up to 1KW at narrow port and 5KW at wide port
• Scalable from 2 channels and up
• Critical and non-critical masks for DVB, ISDB-T
and ATSC
• Adjacent channels capability
• High thermal stability
www.fiplex.comTV Filters
• Up to 10KW
• For analog and DTV
• Several bandwidths available
• Combline and Elliptical configurations
• Low insertion loss
• Low group delay distortion
• High out-of-band rejection
• High thermal stability
www.fiplex.com
Fiplex Communications, Inc.
Headquarters & Distribution Center7331 N.W. 54th Street. Miami, FL 33166. US
Ph: +1 305 884 8991
info@fiplex.com
www.fiplex.com