Post on 05-Jan-2016
description
Die Separation Gas Springs
Traditional die separation with mechanical die separator
TU gas springs used as die separators instead of mechanical die separator
New possibility saving cost using KALLER Die Separation Gas Springs
New Delayed Return Units Series
Die Separation Gas Springs
Benefits of KALLER Die Separation Gas Springs used as die separator:
• Lower press maintenance and energy saving
• Minimal stroke during the production
• No speed limitation
Standard gas springs used as die separation springs
KALLER Die Separation Gas Springs
Advantages
Based on TU outside dimension
Return speed approx. 150 mm/min
Saves up to 5 kW / spring depending of used stroke
Die Separation Gas Springs
L =
14
0 +
(2
x S
)
Lm
in =
14
0 +
SS
3
TU DS
Longer life time due to less stroke
Same mounting possibilities as TU
Models Strokes
DS 3000160;200;250;300
DS 5000160;200;250;300
DS 7500160;200;250;300
Models
Full stroke return time is 1-2 minutes
Less used stroke gives higher energy saving
The springback is up to 10% of the total stroke length depending on the used stroke length
Die Separation Gas SpringsPerformance
Die Separation Gas Springs
New possibility to save cost using KALLER Die Separation Gas Springs
Available 2011-09-15
DS 3000, DS 5000, DS 7500
Summary