Post on 13-Sep-2015
description
3D PRINTER CONTROLLER
CBD-TECH CHITU V3.XA very easy but advance controller
board with pre-configured data
settings and add-on module
functions
Supports both delta, kossel-and cartesian
built 3D Printer
Full Color
Touchscreen
Included
CBD-TECH CHITU V3.X WITH TFT SCREEN 2.8/3.5
INCH COLOR TOUCH SCREEN
FEATURES
Support color TFT touch screen
ARM STM32 microprocessor
Allegro A4988 motor driver
Compatible with most 3D-printer structures (delta,kossel,cartesian)
Chitu firmware consist of important historically data settings\variables from different 3D-printer manufacturer and tests
Very stable, can print many hours ( tested and successfully printed none-stop 72 h)
Support breakpoints, pause print, save and continue next day
Optimized PID parameters and others important parameters in the firmware
12/24V compatible!
Not limited to any print size, build as big as you wants!
Closed sourced firmware, but includes a configuration file for changing settings, very easy to use
Compatible with 5 motors!
Upgradeable hardware design letting you add extra hardware (add-on modules) to the 3D printer controller board(from V3.6)
The Chitu controller board is not open source, which means
the firmware is closed, instead you can change machine
setting and setup through a configuration file that is included.
The firmware is pre-loaded on the board and only CBD-Tech
has the access to change the firmware if needed.
TECHNICAL
SPECIFICATIONS
External Dimension: 150x100 mm
Microprocessor: ARM chip STM32 (STM32F103ZET6)
Input Voltage: 12V~24V, 10~15A
Power Interface: Ordinary /Circular Interface of Adapter
Motor Driver: Allegro A4988
Motor Driven Interface: Single-end features 4 paths & 16 segments and double-end features 5
paths & 16 segments
Temperature Sensor Interface: 3 paths of 100K NTC (thermistor), 2 paths of MAX6675 (thermocouple
Color Touch Screen: 2.8 or 3.5 inches of TFT
Connectivity: SD card, square USB that is convenient for plug and play; communication Baud Rate is 115200
File Format Supported: G-code
Machine Structure Supported: XYZ type, Ultimaker type, Hbot type, DeltaKossel type.
Recommendation of Software: Cura/Repetier-host/Makerware
2.8 Inch Touchscreen Size: 60mmx100mm
3.5 Inch Touchscreen Size: 65mmx115mm
Manual: Yes full english manual and schematics
Drivers: Yes, full english drivers included
SOME ADD-ON MODULES
The Chitu board is add-on friendly. Simple add a module to the controller board to upgrade your 3D Printer.
Customization have never been as easy with the Chitu
controller board.
ADD-ON MODULES MAKES 3D PRINTING
UPGRADEABLE
SEND FILE AND CONTROLL YOUR 3D PRINTER WIRELESS
WITH THE WI-FI ADD-ON MODULE
ANDROID APP INCLUDED
SCHEMATIC OF THE
CHITU BOARD
EASY TO USE WITH PRECONFIGURED
DATA
1. Simple choose your 3D Printer structure
type (delta, kossel or cartesian)
2. Open the complete machine parameters file and change settingsFor example:
Value 0=reprap type of machineValue 1=Makerbot type of machineValue 2=Ultimaker type of machine
M8029 I2
CHITU
STANDARD
INTERFACE
DISPLAY
ALL
TOUCHSCREEN
AND
COLORFUL
CHITU V3.X COMES IN 8 TYPES
Type A: Single extruder motherboard (Thermistor) + 2.8 inch touch screen
Type B: Single extruder motherboard (Thermocouple) + 2.8 inch touch screen
Type C: Double extruder motherboard (Thermistor) + 2.8 inch touch screen
Type D: Double extruder motherboard (Thermocouple) + 2.8 inch touch screen
Type E: Single extruder motherboard (Thermistor) + 3.5 inch touch screen
Type F: Single extruder motherboard (Thermocouple) + 3.5 inch touch screen
Type G: Double extruder motherboard (Thermistor) + 3.5 inch touch screen
Type H: Double extruder motherboard (Thermocouple) + 3.5 inch touch screen
CHITU CURRENTLY HAVE THESE ADD-ON
MODULES (201507)
Type I: WiFi Adapter: You can control the machine, such as stop,
pause, continue, change temp but can also send file through
Type J: Power Module: which allows you to have more current for your 3D printer
Type K: SD Card Reader Module: Add an external SD Card reader
Type L: USB Module: Add an external USB Card port (6,99 USD)
WHO IS CBD-TECH?
CBD-Tech Ltd. is a R&D company with its seat in China, Shenzhen
just 30 minutes from Hong Kong. The company mainly focuses on
3D Printing R&D, but also do external R&D related to the Makers
Space.
CUSTOMER SUPPORT?
At current stage all customer service is handled by staff at www.3dfilamenta.com
You can also visit the official english forum for CBD-Tech here:
http://3dfilamenta.com/forum/forum-18.html
WHERE TO BUY?
International Sales Agency is handled by Tradecore Ltd. (www.trcore.com) through its sales channel www.3dfilamenta.com
You can find the product here: http://3dfilamenta.com/motherboards/290-cbd-chitu-v31-3d-printer-main-board.html
If you want to be a distributor in your country, please send a email to info@3dfilamenta.com
ApplicationQualification
VerificationDiscussion Sign Contract Start Sale