Datasheet Chitu 3D Printer Controller Board
-
Upload
buy-3d-printer -
Category
Documents
-
view
199 -
download
18
description
Transcript of Datasheet Chitu 3D Printer Controller Board
-
3D PRINTER CONTROLLER
CBD-TECH CHITU V3.XA very easy but advance controller
board with pre-configured data
settings and add-on module
functions
Supports both delta, kossel-and cartesian
built 3D Printer
Full Color
Touchscreen
Included
-
CBD-TECH CHITU V3.X WITH TFT SCREEN 2.8/3.5
INCH COLOR TOUCH SCREEN
-
FEATURES
Support color TFT touch screen
ARM STM32 microprocessor
Allegro A4988 motor driver
Compatible with most 3D-printer structures (delta,kossel,cartesian)
Chitu firmware consist of important historically data settings\variables from different 3D-printer manufacturer and tests
Very stable, can print many hours ( tested and successfully printed none-stop 72 h)
Support breakpoints, pause print, save and continue next day
Optimized PID parameters and others important parameters in the firmware
12/24V compatible!
Not limited to any print size, build as big as you wants!
Closed sourced firmware, but includes a configuration file for changing settings, very easy to use
Compatible with 5 motors!
Upgradeable hardware design letting you add extra hardware (add-on modules) to the 3D printer controller board(from V3.6)
The Chitu controller board is not open source, which means
the firmware is closed, instead you can change machine
setting and setup through a configuration file that is included.
The firmware is pre-loaded on the board and only CBD-Tech
has the access to change the firmware if needed.
-
TECHNICAL
SPECIFICATIONS
External Dimension: 150x100 mm
Microprocessor: ARM chip STM32 (STM32F103ZET6)
Input Voltage: 12V~24V, 10~15A
Power Interface: Ordinary /Circular Interface of Adapter
Motor Driver: Allegro A4988
Motor Driven Interface: Single-end features 4 paths & 16 segments and double-end features 5
paths & 16 segments
Temperature Sensor Interface: 3 paths of 100K NTC (thermistor), 2 paths of MAX6675 (thermocouple
Color Touch Screen: 2.8 or 3.5 inches of TFT
Connectivity: SD card, square USB that is convenient for plug and play; communication Baud Rate is 115200
File Format Supported: G-code
Machine Structure Supported: XYZ type, Ultimaker type, Hbot type, DeltaKossel type.
Recommendation of Software: Cura/Repetier-host/Makerware
2.8 Inch Touchscreen Size: 60mmx100mm
3.5 Inch Touchscreen Size: 65mmx115mm
Manual: Yes full english manual and schematics
Drivers: Yes, full english drivers included
-
SOME ADD-ON MODULES
The Chitu board is add-on friendly. Simple add a module to the controller board to upgrade your 3D Printer.
Customization have never been as easy with the Chitu
controller board.
-
ADD-ON MODULES MAKES 3D PRINTING
UPGRADEABLE
-
SEND FILE AND CONTROLL YOUR 3D PRINTER WIRELESS
WITH THE WI-FI ADD-ON MODULE
ANDROID APP INCLUDED
-
SCHEMATIC OF THE
CHITU BOARD
-
EASY TO USE WITH PRECONFIGURED
DATA
1. Simple choose your 3D Printer structure
type (delta, kossel or cartesian)
2. Open the complete machine parameters file and change settingsFor example:
Value 0=reprap type of machineValue 1=Makerbot type of machineValue 2=Ultimaker type of machine
M8029 I2
-
CHITU
STANDARD
INTERFACE
DISPLAY
ALL
TOUCHSCREEN
AND
COLORFUL
-
CHITU V3.X COMES IN 8 TYPES
Type A: Single extruder motherboard (Thermistor) + 2.8 inch touch screen
Type B: Single extruder motherboard (Thermocouple) + 2.8 inch touch screen
Type C: Double extruder motherboard (Thermistor) + 2.8 inch touch screen
Type D: Double extruder motherboard (Thermocouple) + 2.8 inch touch screen
Type E: Single extruder motherboard (Thermistor) + 3.5 inch touch screen
Type F: Single extruder motherboard (Thermocouple) + 3.5 inch touch screen
Type G: Double extruder motherboard (Thermistor) + 3.5 inch touch screen
Type H: Double extruder motherboard (Thermocouple) + 3.5 inch touch screen
-
CHITU CURRENTLY HAVE THESE ADD-ON
MODULES (201507)
Type I: WiFi Adapter: You can control the machine, such as stop,
pause, continue, change temp but can also send file through
Type J: Power Module: which allows you to have more current for your 3D printer
Type K: SD Card Reader Module: Add an external SD Card reader
Type L: USB Module: Add an external USB Card port (6,99 USD)
-
WHO IS CBD-TECH?
CBD-Tech Ltd. is a R&D company with its seat in China, Shenzhen
just 30 minutes from Hong Kong. The company mainly focuses on
3D Printing R&D, but also do external R&D related to the Makers
Space.
-
CUSTOMER SUPPORT?
At current stage all customer service is handled by staff at www.3dfilamenta.com
You can also visit the official english forum for CBD-Tech here:
http://3dfilamenta.com/forum/forum-18.html
-
WHERE TO BUY?
International Sales Agency is handled by Tradecore Ltd. (www.trcore.com) through its sales channel www.3dfilamenta.com
You can find the product here: http://3dfilamenta.com/motherboards/290-cbd-chitu-v31-3d-printer-main-board.html
If you want to be a distributor in your country, please send a email to [email protected]
ApplicationQualification
VerificationDiscussion Sign Contract Start Sale