Post on 16-May-2018
info@cartercontrols.com | 1.877.722.4227
The CarterRoll™ Conveyors are safe, durable and reliable, sized in various standard widths and lengths for fl oor or overhead mounting. These conveyors run only when needed to move product, thereby conserving power, reducing wear and tear and limiting operational noise.
Each CarterRoll™ Conveyor consists of motorized power rollers (MPR) and slave/idler rollers confi gured into zones with the master power roller and idler rollers interconnected via “O” rings. Motorized power rollers are placed as needed along the conveyor equipment to assure the consistent movement, control and orientation of the heaviest required product container. The zone design provides zero-pressure, zero-contact accumulation keeping product from contacting each other along the conveyor path.
The product in one zone will only move along into the next zone if the next zone is unoccupied. Conveyor zones stop running if there is no product to transport in that zone reducing operational cost and extending product life. When there is a backup on the downstream
conveyor, containers accumulate automatically upstream until the backup is cleared.
Both mechanical and electrical components for the CarterRoll™ Conveyor are modular and interchangeable. All electrical components meet applicable standards for rating, class, and approvals for NEMA, UL and CE. All conveyor wiring is captured within the conveyor framing and utilizes a combination of terminal blocks, quick disconnect connectors and wire/cable harnesses.
BENEFITS• Low power consumption
• Safe and quiet operation
• Lower cost of ownership
• Low noise-ABEC Bearings
• Requires no signifi cant preventive maintenance
• Run-on-Demand mode provides cost savings and
extended service life
• Reduce installation time and complexity
• Enhanced system layout fl exibility
CONVEYORS
7118 Geoffrey Way / Suite A / Frederick / MD 21704-7109
301-698-9660 • 877-722-4CCS
Sales@cartercontrols.com
CarterControls.com
Technical DataStraight
• 6” to 10’ in 1” increments
Curve
• 30, 45, and 90 degree
Merge
• 7.5’ main Line w/30 degree spur
Lift Gate
• 36” and 72”
Tight Radius Merge
• 90 Degree Merge Point
Turn Table Divert
• 2 way or 3 way
Cross Transfer
• 2 way or 3 way
Intersection
• Right angle merge
Turning Post Section
• Retractable or fixed
Features• 40 Lbs per linear foot
• 24VDC operating voltage
• Modular component design
• Auto activated zero-pressure,
zero-contact zones
• Reduced energy consumption
• Standard between frame widths range from 15” to 36”
• Plug and convey modules pretested and engineered to
reduce maintenance
• 30 FPM - 300 FPM
• Reduced noise levels
CONVEYORSCarterRollTM
Cross Transfers
Turntable
Power Turning Posts
Lift Gate
Pushers