Post on 06-Apr-2017
PROPPINGEQUIPMENT
2 // For further information visit www.coateshire.com.au/productsPropping Equipment
At Coates Hire, we offer not only the highest quality equipment, we equip our customers with the best expertise in the industry. We can provide expert advice on evaluating the risks associated with equipment supply, performance and operation. Our Engineering Services Team offers comprehensive technical support and we can assist in the concept and design of all engineering solutions. All of which ensures that your site is always performing to its full potential.
Our unique ability to provide total equipment solutions helps you drive both time and costefficiencies. We have the expertise to ensure you have everything you need, anytime you need it. So no matter how big or small your project is, you can count on Coates Hire to help make it happen.
• Commitment to Safety: We are passionately commited to safety, helping deliver your project on time whilst ensuring you’re meeting duty of care obligations.
• 130 Years’ Experience: We have a track record that spans every market sector, helping to deliver successful projects across a wide range of industries
• Project Support: Over product specialists and engineers are committed to providing complete, cost-effective solutions to your specific project needs.
• Industry Leading Customer Service: At Coates Hire we take customer service seriously and ensure we are continually improving your experience.
• Engineering and Technical: Our dedicated team of experts can provide technical solution, design, certification and installation services for temporary works requirements.
• R&D Capabilities: Our research, development & innovation arm constantly strives to find new and better solutions, systems and equipment for our customers.
OUR EXPERTISE:
CONTENTSPROPPING EQUIPMENTAcrow Props 04 Strong Boy Wall Supports 04
Titan Super Props 05Titan Ledger Frames & Accessories 07
Mini Tri Props 09
Trishore Props 11 Trishore Prop Components 12 Mono Props 13 Tilt Props 15 Needle & Grillage Beams 16 Sleepers 16 Propping Accessories 16 Universal Prop System 15 17 Universal Prop System 30 18 Universal Prop System 60 19Turnkey Solutions & Installation Model 20
4 // // 5For further information visit www.coateshire.com.au/productsPropping Equipment Propping Equipment
PROPPING EQUIPMENT
Acrow PropsThe remarkably versatile Acrow Prop has many uses and it would be hard to find a building site where it is not used in one way or another. The universal popularity of the Acrow Prop is due to the fact that it provides the simplest and quickest method of temporary support.
A multitude of uses:The main use of the Acrow Prop is in the temporary support of formwork for reinforced concrete floors and beams. They are equally useful as raking shores to support formwork for columns, walls and staircases. They are invaluable in repair work, for replacing a permanent support, for supporting canopies, lintels and the like, while brick work or concrete is setting.
PROP RANGE SPECIFICATIONS
Prop Size Weight Closed Open Est WeightLoad Cap (Closed)
Load Cap (Open)
No. 0 12kg 1050mm 1830mm 13.0kg 40kN 25kN
No. 1 16.2kg 1600mm 2800mm 17.3kg 34kN 14kN
No. 2 18.9kg 1900mm 3400mm 20.0kg 40kN 11kN
No. 3 21.4kg 2170mm 3975mm 22.6kg 35kN 8kN
No. 4 29kg 3100mm 4900mm 30.0kg 20kN 7kN
Working Load Height Working Load Height Working Load Height Working Load Height Working Load Height
43 1.025 35 1.6 39 1.9 37 2.2 22 3.1
43 1.15 19 2.2 23 2.225 37 2.35 20 3.125
25 1.6 14 2.6 17 2.55 25 2.5 11 3.95
23.5 1.8 13 2.8 11 3.25 13 3.15 8 4.9
11 3.4 9 3.925
7.5 3.975
No. 0 No. 1 No. 2 No. 3 No. 4
No. 0
No. 1
No. 2No. 3
No. 4
0
5
10
15
20
25
30
35
40
45
50
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Wor
king
Loa
d Li
mit
(kN
)
Prop Height (m)
No. 0
No. 1
No. 2No. 3
No. 4
0
5
10
15
20
25
30
35
40
45
50
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Wor
king
Loa
d Li
mit
(kN
)
Prop Height (m)
LOAD CHART
Strong Boy Wall SupportsSupporting walls while you fit lintels, R.S.J’s or beams can be tricky but not with the Strong Boy wall support. Simply hammer the blade into a raked mortar joint and support it with a single Acrow prop while you remove the masonry beneath. (refer to an engineer for load capacities).
STRONG BOY SUPPORTS
WLL = 350kg (maximum working height = 3.2m)
Prop Height (m)
Wor
king
Loa
d Li
mit
(kn)
Titan Super Props
PROPPING EQUIPMENT
Capable of supporting eight times the load for the same weight of its steel counterpart, this extruded aluminium prop is easily handled in awkward locations. Ideally suited for building remediation and difficult access application due to their light weight and ease of erection.
• Massive 10t safe load• Light alloy easy handling
Titan Super Props are available in three sizes:
TITAN SUPER PROPS SPECIFICATIONS
Prop Size Weight Closed OpenLoad Cap (Closed)
Load Cap (Open)
No. 2 18kg 1700mm 2900mm 100.0kN 42.0kN
No. 4 22.4kg 2900mm 4100mm 94.9kN 41.0kN
No. 6 29.4kg 4300mm 5500mm 42.0kN 27.0kN
TITAN SUPER PROPS (ALUMINIUM)
ExtensionsNo.2
1.7 - 2.9m5’7” - 9’6”
No.42.9 - 4.1m
9’6” - 13’5”
No.64.3 - 5.5m
14’1” - 13’5”
Metres 17kg 21kg 28kg
1.70 100 kN - -
1.90 100 kN - -
2.10 100 kN - -
2.30 100 kN - -
2.50 88 kN - -
2.70 57 kN - -
2.90 42 kN 94.9 kN -
3.10 - 79.9 kN -
3.30 - 70.0 kN -
3.50 - 62.4 kN -
3.70 - 55.0 kN -
3.90 - 50.0 kN -
4.10 - 41.0 kN -
4.30 - - 42.0 kN
4.50 - - 39.0 kN
4.70 - - 37.1 kN
4.90 - - 33.0 kN
5.10 - - 31.0 kN
5.30 - - 28.0 kN
5.50 - - 27.0 kN
6 // // 7For further information visit www.coateshire.com.au/productsPropping Equipment Propping Equipment
PROPPING EQUIPMENT
Titan Super Props
Titan Super Props can be used in combination for longer spans.
TITAN PROP
Height(mm)
2 4 6
4600-5600 1 1
5800-6800 2
6000-7000 1 1
7200-8200 1 1
8600-9600 2
Joint InformationMinimum 8 x M12 x 35mm 8.8 grade bolts with 16 x 13mm washers.
PERMISSABLE LOAD (KN) FOR TITAN PROPS IN COMBINATION
Total PropHeight (mm)
5600 5800 6000 6200 6400 6600 6800 7000 7200 7400 7600 7800 8000 8200 8400 8600 8800 9000
kN 22 21 20 19 18 17 16 15.2 14.5 13.8 13 12.5 11.9 11.4 10.8 10.4 9.9 9.5
The Titan is a versatile, well engineered prop that replaces traditional steel props. Manufactured from aluminium, the Titan Prop works in compression to provide a versatile solution for a wide variety of applications.
Titan No.2 Titan No.4 Titan No.6
Headplate Detail
Section Detail
Baseplate Detail
Titan Ledger Frames & Accessories
PROPPING EQUIPMENT
Coates Hire has a range of Titan Ledger Frames.Note: Frame dimensions shown are in millimetres and centre-to-centre of Titan legs.Ledger Frames are only designed for loads between two vertical Titan legs.
600 (5.6kg)
900 (7.5kg) 1200 (7.8kg) 1600 (9.5kg)
1800 (10.2kg)Titan Rocking Head (2.8kg)For sloping soffits, ramps and other inclined surfaces.
Maximum slope angle = 33 degrees to Top Plate
8 // // 9For further information visit www.coateshire.com.au/productsPropping Equipment Propping Equipment
PROPPING EQUIPMENT
Titan Super Props
TITAN LEG GRAPH
SAFE
VER
TICA
L LO
AD
- kN
FLOOR TO SOFFIT HEIGHT - m
SAFE
VER
TICA
L LO
AD
- kN
ADJUSTABLE JACK EXTENSION - mm
TITAN JACK GRAPH
Mini Tri Props
PROPPING EQUIPMENT
The Heavy Load Support System with capacity up to 125kN. The Mini Tri Prop allows for fine adjustment by screw jacks.
The permissible loading given is for a free standing strut without intermediate bracing. Prop load rating can be increased by providing adequate bracing at intermediate points (to be calculated by an engineer). To be effective the bracing must be in two directions, preferably at right angles. In every case some cross bracing is essential for erection and stabilising against any lateral force. Bracing to be correctly fitted to Australian Standards requirements.
Lightweight, high capacity, intermediate props load capacity 12t @ 3m.
Mini Tri Prop advantages:
MINI TRI PROP SPECIFICATIONS
Description 1 metre Section 1.5 Metre Section 2 metre Section
Weight 15.8kg 22.3kg 29.3kg
LOAD CHART
LEFT HANDED HEAD JACK SPECIFICATIONS
Description Head Jack
Weight 19.6kg
Adjustable From 195-475mm
Base 200 x 200mm
RIGHT HANDED HEAD JACK SPECIFICATIONS
Description Base Jack
Weight 19.6kg
Adjustable From 195-475mm
Base 200 x 200mm
Left Hand Thread Right Hand Thread Mini Tri outside dimensions
length Load
0 127
1 126.5
2 125
3 122
4 118
5 112
6 102
7 89
0
20
40
60
80
100
120
140
160
180
0 1 2 3 4 5 6 7 8
Wor
king
Loa
d Li
mit
(kN
)
0
20
40
60
80
100
120
140
160
180
0 1 2 3 4 5 6 7 8
Wor
king
Loa
d Li
mit
(kN
)
Prop Height (m)
• Left and right hand threadedjacks – turn prop for adjustment
• Lightweight• No spanners required
• Economical – savings in erection and transportation
• Braced with standard scaffold tube and clips
10 // // 11For further information visit www.coateshire.com.au/productsPropping Equipment Propping Equipment
PROPPING EQUIPMENT
Mini Tri Props
WARNING: Mini Tri Props are not designed for eccentric or lateral loads. Loading must be positioned directly over centre of prop, bracing must be in two directions preferably at right angles.
MINI TRI PROP COMPONENT SPECIFICATIONS
MassOverall Height of Mini Tri Prop with Base and
Head Jack
Number of Intermediate Sections Required
Kg Metres 1m 1.5m 2m
55 1.390 - 1.950 1 - -
61.5 1.890 - 2.450 - 1 -
68.5 2.390 - 2.950 - - 1
77.3 2.890 - 3.450 1 1 -
88.3 3.390 - 3.950 - 2 -
90.8 3.890 - 4.450 - 1 1
97.8 4.390 - 4.950 - - 2
106.6 4.890 - 5.450 1 1 1
113.6 5.390 - 5.950 1 - 2
120.1 5.890 - 6.450 - 1 2
127.1 6.390 - 6.950 - - 3
Trishore Props
PROPPING EQUIPMENT
The Heavy Load Support System with capacity up to 178kNTrishore advantages:• Able to support heavy loads at considerable height• Fine adjustment by screw jacks• Economical, savings in labour and transport• Braced in groups can support exceptionally heavy loads• Interchangeable sections
Features:• Intermediate sections available in three different lengths • Domed bearing plate to ensure concentric loading• Head Jack adjustments fits flanged beams• Quick action connector
The permissible loading given is for a free standing strut without intermediate bracing. Prop load rating can be increased by providing adequate bracing at intermediate points (to be calculated by a qualified engineer).
To be effective the bracing must be in two directions, preferably at right angles. In every case some cross bracing is essential for erection and stabilising against any lateral force.
Bracing to be correctly fitted to Australian Standards requirements.
LOAD CHARTHeight ft Height m Load
16 4.8768 177.9
17 5.1816 176.6
18 5.4864 174.8
19 5.7912 173
20 6.096 171.2
21 6.4008 169.5
22 6.7056 167.2
23 7.0104 165
24 7.3152 162.4
25 7.62 159.7
26 7.9248 157
27 8.2296 154.3
28 8.5344 151.7
29 8.8392 149
30 9.144 146.3
31 9.4488 143.7
32 9.7536 141
33 10.0584 137.9
34 10.3632 134.8
35 10.668 131.7
36 10.9728 128.50
20
40
60
80
100
120
140
160
180
200
Wor
king
Loa
d Li
mit
(kN
)
36 10.9728 128.5
37 11.2776 125.4
38 11.5824 122.3
39 11.8872 119.2
40 12.192 115.2
41 12.4968 112.1
42 12.8016 109
43 13.1064 105.4
44 13.4112 101.8
45 13.716 98.3
0
20
40
60
80
100
120
140
160
180
200
4 5 6 7 8 9 10 11 12 13 14
Wor
king
Loa
d Li
mit
(kN
)
Prop Height (m)Prop Height (m, Effective Length)
Wor
king
Loa
d Li
mit
(kn)
12 // // 13For further information visit www.coateshire.com.au/productsPropping Equipment Propping Equipment
PROPPING EQUIPMENT
Trishore Prop ComponentsAll Trishores are made up with a Base Jack whose height may be varied between 406mm and 667mm and a Flat Head Piece with a height of 165mm or a Head Jack with a height adjustable between 387mm and 680mm. The Intermediate Sections required for various overall heights are shown below.
Trishore outside dimensions
TRISHORE PROP COMPONENT SPECIFICATIONS
MassOverall Height of Trishore with Base Jack and Flat
Head Piece
Number of Intermediate Sections
Required
Overall Height of Trishore with Base Jack
and Head JackMass
Kg Metres 1250 1500 2000 Metres Kg48 0.50 - 0.84 - - - 1.10 - 1.30 6676 1.82 - 2.08 1 - - 2.04 - 2.60 9480 2.07 - 2.33 - 1 - 2.29 - 2.84 9789 2.57 - 2.83 - - 1 2.79 - 3.35 107104 3.07 - 3.33 2 - - 3.30 - 3.85 122109 3.32 - 3.58 1 1 - 3.54 - 4.09 127113 3.57 - 3.83 - 2 - 3.78 - 4.34 131117 3.82 - 4.08 1 - 1 4.04 - 4.60 135122 4.07 - 4.33 - 1 1 4.29 - 4.85 140132 4.32 - 4.58 3 - - 4.55 - 5.10 150130 4.57 - 4.83 - - 2 4.80 - 5.35 148141 4.82 - 5.08 1 2 - 5.04 - 5.59 159145 5.07 - 5.33 2 - 1 5.29 - 5.85 163150 5.32 - 5.58 1 1 1 5.54 - 6.10 168154 5.57 - 5.83 - 2 1 5.78 - 6.35 172158 5.82 - 6.08 1 - 2 6.03 - 6.60 177163 6.07 - 6.33 - 1 2 6.28 - 6.85 181173 6.33 - 6.58 3 - 1 6.53 - 7.10 191171 6.57 - 6.83 - - 3 6.78 - 7.35 190182 6.82 - 7.08 1 2 1 7.03 - 7.60 200186 7.07 - 7.33 2 - 2 7.28 - 7.85 205191 7.32 - 7.58 1 1 2 7.53 - 8.10 209195 7.57 - 7.83 - 2 2 7.78 - 8.35 214200 7.82 - 8.08 1 - 3 8.03 - 8.60 218204 8.08 - 8.33 - 1 3 8.28 - 8.85 222215 8.33 - 8.58 3 - 2 8.53 - 9.10 233213 8.57 - 8.82 - - 4 8.78 - 9.35 231224 8.82 - 9.08 1 2 2 9.03 - 9.60 242228 9.07 - 9.33 2 - 3 9.28 - 9.85 246232 9.32 - 9.40 1 1 3 9.53 - 10.10 251236 9.57 - 9.83 - 2 3 9.78 - 10.35 255241 9.82 - 10.08 1 - 4 10.03 - 10.60 269245 10.07 - 10.33 - 1 4 10.28 - 10.85 264256 10.34 - 10.58 3 - 3 10.53 - 11.10 273254 10.57 - 10.83 - - 5 10.78 - 11.35 272265 10.82 - 11.08 1 2 3 11.03 - 11.60 283269 11.07 - 11.33 2 - 4 11.28 - 11.85 287273 11.32 - 11.58 1 1 4 11.53 - 12.10 292278 11.57 - 11.83 - 2 4 11.78 - 12.35 296282 11.84 - 12.08 1 - 5 12.03 - 12.60 300286 12.07 - 12.33 - 1 5 12.28 - 12.85 305
INTERMEDIATE SECTIONS SPECIFICATIONS
Description Intermediate Section
Intermediate Section
Intermediate Section
Length 1250mm 1500mm 2000mm
Weight 28kg 33kg 41kg
HEAD JACK SPECIFICATIONS
Description Head Jack
Weight 32kg
Adjustment from 378 - 680mm
BASE JACK SPECIFICATIONS
Description Base Jack
Weight 34kg
Adjustment from 406 - 667mm
FLAT HEAD PIECE SPECIFICATIONS
Description Flat Head Piece
Weight 14kg
Height 165mm
Mono Props
PROPPING EQUIPMENT
The Heavy Load Support System with capacity up to 300kNMono Prop advantages: • Able to support heavy loads at considerable height • Savings in labour and transport due to high load capacity• Mono Props braced in groups can support exceptionally heavy loads • Interchangeable sections • Fine adjustment by screw jacks
Features:• Able to support heavy loads at considerable height • Savings in labour and transport due to high load capacity• Mono Props braced in groups can support exceptionally heavy loads • Interchangeable sections • Fine adjustment by screw jacks
All Mono Props are made up with a Base Jack whose height may be varied between 280mm and 550mm and a Flat Head Piece with a height of 145mm or a Head Jack with a height adjustable between 320mm and 580mm. The Intermediate Sections required for various overall heights are shown below.
INTERMEDIATE SECTIONS AVAILABLE IN THREE DIFFERENT LENGTHS
Intermediate Section Mass
1200mm 45kg
1500mm 49kg
2000mm 60kg
280mm
280mm
280mm
170mm
170mm
170mm
14 // // 15For further information visit www.coateshire.com.au/productsPropping Equipment Propping Equipment
LOAD CHARTHEAD JACK, BASE JACK & FLAT HEAD PIECE SPECIFICATIONS
Description Weight Adjustable
Head Jack 38kgFrom 230 -
580mm
Base Jack 41kg From 280 - 550mm
Flat Head Piece
23kg Height 145mm
Dia. 300mm
Height Load
1 345
2 335
3 300
4 250
5 190
6 143
7 108
8 85
9 70
10 65
0
50
100
150
200
250
300
350
400
0 2 4 6 8 10
Wor
king
Loa
d Li
mit
(kN
)
0
50
100
150
200
250
300
350
400
0 2 4 6 8 10
Wor
king
Loa
d Li
mit
(kN
)
Prop Height (m)
PROPPING EQUIPMENT
Mono Props
Head Jack
Flat Head Piece
Base Jack
The permissible loading given is for a free standing strut without intermediate bracing. The effective length ‘L’ can be reduced by providing adequate bracing at intermediate points. To be effective the bracing must be in two directions, preferably at right angles. In every case some cross bracing is essential for erection and stabilising against any lateral force. Bracing to be correctly fitted to Australian Standards requirements.
MONO PROPS SPECIFICATIONS
MassOverall Height of Mono Prop with Base Jack and
Flat Head Piece
Number of Intermediate Sections
Required
Overall Height of Mono Prop with Base
Jack and Head JackMass
Kg Metres 1200 1500 2000 Metres Kg109 1.62 - 1.90 1 - - 1.80 - 2.33 124113 1.92 - 2.20 - 1 - 2.1 - 2.63 128124 2.42 - 2.70 - - 1 2.06 - 3.13 139154 2.82 - 3.10 2 - - 3.0 - 3.53 169158 3.12 - 3.40 1 1 - 3.30 - 3.82 173162 3.42 - 3.70 - 2 - 3.60 - 4.13 177169 3.62 - 3.90 1 - 1 3.80 - 4.33 184173 3.92 - 4.20 - 1 1 4.10 - 4.63 188199 4.02 - 4.30 3 - - 4.20 - 4.74 214184 4.42 - 4.70 - - 2 4.60 - 5.13 240207 4.62 - 4.90 1 2 - 4.80 - 5.32 222214 4.82 - 5.10 2 - 1 4.99 - 5.53 229218 5.12 - 5.40 1 1 1 5.30 - 5.83 233222 5.42 - 5.70 - 2 1 5.60 - 6.13 237229 5.62 - 5.90 1 - 2 5.81 - 6.32 244233 5.92 - 6.20 - 1 2 6.10 - 6.63 248259 6.02 - 6.30 3 - 1 6.20 - 6.73 274244 6.42 - 6.70 - - 3 6.60 - 7.13 259267 6.62 - 6.90 1 2 1 6.80 - 7.32 282274 6.82 - 7.10 2 - 2 7.0 - 7.53 289278 7.12 - 7.40 1 1 2 7.30 - 7.82 293282 7.42 - 7.70 - 2 2 7.60 - 8.13 297289 7.62 - 7.90 1 - 3 7.80 - 8.33 304293 7.92 - 8.20 - 1 3 8.10 - 8.63 308319 8.02 - 8.30 3 - 2 8.20 - 8.72 334304 8.42 - 8.70 - - 4 8.60 - 9.13 319327 8.62 - 8.90 1 2 2 8.80 - 9.33 342334 8.82 - 9.10 2 - 3 9.00 - 9.53 349338 9.12 - 9.40 1 1 3 9.29 - 9.83 353342 9.42 - 9.70 - 2 3 9.60 - 10.13 357349 9.62 - 9.90 1 - 4 9.80 - 10.33 364353 9.92 - 10.20 - 1 4 10.10 - 10.63 368379 10.02 - 10.30 3 - 3 10.20 - 10.73 394364 10.42 - 10.70 - - 5 10.60 - 11.13 379
WARNING: Mono Props are not designed for eccentric or lateral loads. Loading must be positioned directly over centre of prop, bracing must be in two directions preferably at right angles.
Prop Height (m)
Wor
king
Loa
d Li
mit
(kn)
Tilt Props
PROPPING EQUIPMENT
A
A C
B
COATES LOCK ACCESSORIES
Description Image
Coates Lock A
Coates Pins B
Coates Magnet C
Padlock D
Advances in precast concrete construction techniques have brought new challenges as panel sizes and resulting loads have escalated. Our range of push-pull props suit high load applications. Props are individually tagged with service certificates. Available in 7 sizes.
TILT PROPS SPECIFICATIONS
Prop Name LengthClosed SWL
Middle SWL
Full SWL
Weight Availability
Shisham Mini
2.4m–4.1m 2.4m-35kN 3.5m-32kN 4.1m-30kN 36kg Not available in all states
RJB Mini 2.6m–4.4m 2.6m-44kN 3.5m-35kN 4.4m-30kN 37kg NSW,SA,VIC, QLD, ACT
RJB Standard
4.4m–6.8m 4.4m-40kN 5.5m-23kN 6.8m-14kN 53kg NSW,SA,VIC, QLD, ACT
Shisham Standard 1
4.35m–7.0m 4.35m-40kN 5.8m-22kN 7.0m-18kN 55kg Not available in all states
RJB Jumbo 6.2m–10.0m 6.2m–25kN 8.0m-13kN 10m-6kN 78kg NSW,SA,VIC, QLD, ACT
Shisham Jumbo
6.4m-11.5m 6.4m–30kN 9.0m-15kN 11.5m-8kN 106kg Not available in all states
Shisham Supa Jumbo
8.5m-14.5m 8.5m–26kN 11.5m-8kN 14.5m-4kN 137 kg Not avilable in all states
Safe working load recommendations• Two props/braces minimum per panel for stability and load transfer. • Whenever possible the props/braces should be fixed to the panel prior to lifting.• For additional or more in-depth information contact Coates Hire.
D
B
16 // // 17For further information visit www.coateshire.com.au/productsPropping Equipment Propping Equipment
PROPPING EQUIPMENT
Needle & Grillage BeamsNeedle Beams are used in propping and needling applications. They are available in various lengths and sizes. NB. Spigot joints are not designed to support beam loads. Grillage Beams can be used for dispersing heavy loads on poor quality footings.
NEEDLE AND GRILLAGE BEAM SPECIFICATIONS
Description Length Width Height Weight
Needle Beams 2m 75mm 150mm 40kg
Needle Beams 3m 75mm 150mm 60kg
Needle Beams 2m 130mm 200mm 60kg
Needle Beams 3m 130mm 200mm 90kg
Needle Beams 2m 165mm 310mm 100kg
Needle Beams 3m 165mm 310mm 150kg
Grillage Beams 2m 254mm 254mm 190kg
Grillage Beams 2.5m 254mm 254mm 236kg
SleepersSleepers can be used in different formations such as grid patterns to form base pads or sole plates to support and spread the load on various surfaces.
SLEEPER SPECIFICATIONS
Description Dimensions mm Approx. Weight
Full Sleepers 2400 x 200 x 100 40kg
Half Sleepers 1200 x 200 x 100 20kg
Quarter Sleeper 600 x 200 x 100 10kg
Propping Accessories
Mono Coupler Tube Coupler
Titan Coupler
Coates Hire has a range of bracing accessories which are used to tie together various structures. If you have a special requirement contact a Coates Engineer.
SCAFFOLD TUBE SPECIFICATIONS
Length Outside Dimensions
1m 50mm
2m 50mm
3m 50mm
4m 50mm
5m 50mm
6m 50mm
Scaffold Tubing
LOAD CHART
Universal Prop System 15
PROPPING EQUIPMENT
Needle Beam Fixing Clamp Screw Jack (System 15)
2m
1m
500mm
250mm
125mm
Packing PlateRaking Bracket (limited load capacity)
Universal System 15 is the latest addition to the Coates Hire Support System range of propping. It can connect to the System 30 as well as System 60 to provide a versatile propping system.
Besides being used as a compression member, this system has found use as a form work soldier, a raking prop and also as a bracing where it provides an efficient load carrying capacity for the loads up to 160kN.The section of the System 15 prop is 140 x 190 mm.
M14 N, B & W are required to connect members and accessories of System 15 together.
End Plate Detail (mm) System 15 Typical Hole Centres (mm)
UNIVERSAL PROP SYSTEM 15 SPECIFICATIONS
Description Length Weight
System 15 125mm Section 125mm 5.5kg
System 15 250mm Section 250mm 8kg
System 15 500mm Section 500mm 12kg
System 15 1000mm Section 1000mm 21kg
System 15 2000mm Section 2000mm 38kg
SYSTEM 15 SCREW JACK SPECIFICATIONS
Description Screw Jack
Weight 16kg
Adjustment 400 - 610mm
Base 190 x 140mm
Height Load
0 163
3 163
4 128
5 105
6 90
7 80
8 75
0
50
100
150
200
250
0 1 2 3 4 5 6 7 8
Wor
king
Loa
d Li
mit
(kN
)
Prop Height (m)Prop Height (m, Effective Length)
Wor
king
Loa
d Li
mit
(kn)
18 // // 19For further information visit www.coateshire.com.au/productsPropping Equipment Propping Equipment
LOAD CHART
PROPPING EQUIPMENT
Universal Prop System 30
Typical Hole Centres (mm)
End Plate Detail (mm)
2m
1m
500mm
250mm 125mm
SYS 30 Bracing
Flange Scaffold Coupler Swivel Scaffold Coupler Packing Plates
End ConnectorTruss Fixing Bracket
Raking Bracket (limited load capacity)
Screw Jack
Transfer Fixing plate (allows system to be fixed to concrete)
Needle Beam Fixing Clamp
Universal System 30 is amongst the latest addition to the Coates Support Systems range of propping and is essentially a lighter version of System 60. This system is more efficient than a formwork soldier. The System 30 prop unit has a safe axial capacity of 30 tonnes and is a similar fabrication to System 60 Prop Unit but with a 190mm square section. Holes in both flanges of the prop unit enable the positive and direct bolting of bracing members and other props. Highly efficient frames, trusses and three dimensional structures can be designed and built entirely from off the shelf components thereby reducing lead time. The modular concept and simple connection details also ensure rapid assembly and dismantling times. The System 30 beams can attach directly to the web of System 60 enabling substitution for cross members in System 60 designs. M18 N, B and W are required to connect members of System 30 and 60. Coates Hire has a range of propping and needling accessories which can be used as illustrated. The permissible loading given is for a free standing strut, incorporating one screw jack and multiples of beam section connected by standard 4 bolt pattern, without intermediate bracing, placed between firm and level bearing surfaces. Refer to AS 3610 for acceptable criteria for installation, bracing and eccentricity of loading. Screw jack to be placed at a strut end only.
UNIVERSAL PROP SYSTEM 30 SPECIFICATIONS
Description Length Weight
System 30 125mm Section 125mm 8kg
System 30 250mm Section 250mm 11kg
System 30 500mm Section 500mm 17kg
System 30 1000mm Section 1000mm 30kg
System 30 1500mm Section 1500mm 42kg
System 30 2000mm Section 2000mm 55kg
SYSTEM 30 SCREW JACK SPECIFICATIONS
Description Screw Jack
Weight 25kg
Adjustment 400 - 610mm
Base 190 x 190mm
SYSTEM 30 ACCESSORIES
Description
Raking Bracket
End Connector
Packing Plates
Swivel Scaffold Coupler
Flange Scaffold Coupler
Transfer Fixing Plate
Truss Fixing Plate
Needle Beam Fixing Clamp
System 30 Bracing
Height Load
0 365
1 365
2 365
3 305
4 247
5 193
6 145
7 110
8 83
9 65
10 55
0
50
100
150
200
250
300
350
400
0 1 2 3 4 5 6 7 8 9 10
Wor
king
Loa
d Li
mit
(kN
)
Prop Height (m)
0
50
100
150
200
250
300
350
400
0 1 2 3 4 5 6 7 8 9 10
Wor
king
Loa
d Li
mit
(kN
)
Prop Height (m)Prop Height (m, Effective Length)
Wor
king
Loa
d Li
mit
(kn)
Universal Prop System 60
PROPPING EQUIPMENT
Universal System 60 is a high capacity prop in the System Prop family. It is fully compatible with system 30 and also connects to System 15 props. System 60 has a nominal safe axial load of about 60 tonnes. This extremely versatile modular system, comprising bracing members, grillage beams, needle beams and an extensive range of ancillary components is more than capable of providing a safe and economical solution for medium to heavy duty propping applications. System 60 can be integrated with System 30 to achieve varying structures. The versatility of the system and its components ensures that solutions can be found for a very wide range of support problems. The permissible loading given is for a free standing strut, incorporating one screw jack and multiples of beam section connected by standard 4 bolt pattern, without intermediate bracing, placed between firm and level bearing surfaces. Refer to AS 3610 for acceptable criteria for installation, bracing and eccentricity of loading. Screw jack to be placed at a strut end only.
UNIVERSAL PROP SYSTEM 60 SPECIFICATIONS
Description Length Weight
System 60 125mm Section 125mm 19kg
System 60 250mm Section 250mm 23kg
System 60 500mm Section 500mm 33kg
System 60 1000mm Section 1000mm 54kg
System 60 1500mm Section 1500mm 76kg
System 60 2000mm Section 2000mm 96kg
SYSTEM 60 SCREW JACK SPECIFICATIONS
Description Screw Jack
Weight 32kg
Adjustment 400 - 610mm
Base 250 x 250mm
Typical Hole Centres (mm)
End Plate Detail (mm)
Multi Angle Bracket
SYS 60 Bracing
Flange Scaffold Coupler Swivel Scaffold Coupler Packing Plates
End Connector Truss Fixing Bracket
Raking Bracket (limited load capacity)
Screw Jack
Transfer plate (allows system to be fixed to concrete
Needle Beam Fixing Clamp
2m
1.5m
1m
500mm
125mm250mm
LOAD CHART
10
600
500
400
300
200
100
0
0 1 2 3 4 5 6 7 8 9
Prop Height (m, Effective Length)
Allo
wab
le L
oad
(kn)
SYSTEM 60 ACCESSORIES
Description
Raking Bracket
End Connector
Packing Plates
Swivel Scaffold Coupler
Web Scaffold Coupler
Flange Scaffold Coupler
Transfer Fixing Plate
Truss Fixing Plate
Needle Beam Fixing Clamp
System 30 Bracing
20 // // 21For further information visit www.coateshire.com.au/productsPropping Equipment Propping Equipment
Turnkey Solutions & Installation Model
Our turnkey solution began as a customer project site support offering, focusing on dewatering andstructural propping services. This includes not only the provision of engineering support and great product solutions but also a team of qualified site engineers that can install the products safely and then support the project at every stage up to completion.
We have decided to further develop the turnkey solutions model to other areas of our specialist product portfolio and to enhance the offering by building a team of fully trained and accredited riggers andengineers that can project manage from conceptual designs through to installation.
Qualified Project Managers oversee the process from start to finish and with the full support of ourengineering team we can now partner with our customers to supply an exceptional and unique installation service. This single point of contact streamlines the process and means we can react quickly to fulfil customer expectations.
Our engineers are able to sign off installations and quickly manage any variations to an agreeable outcome, reducing down time and speeding up processes. This provides our customers with great value and peace of mind knowing that a single source solution is eliminating the need for multiple contractors on the project to achieve the same goal, reducing valuable down time and saving time and money along the way.
Engineering & Technical Services
At Coates Hire, we aim to supply cost effective custom designed solutions for all our specialist product areas and in particular projects where temporary works play a key part in the construction process.To achieve this we have set up a team of fully qualified structural, civil, mechanical and environmentalengineers with many years of industry experience to work with our clients at all stages in the projectprocess from design right through to commissioning and handover.
This enables us to support our clients, along with their consultants and contractors, delivering the best and most cost effective engineering solution for their project.
We can now support you at the very early planning stage, manage the installation process via a range of turnkey solutions and also provide engineering sign off for designs and installed schemes when needed.
We provide full project support, which includes a team of qualified experts offering support and advice ranging from simple enquiries to highly complex project challenges.
Technical and Engineering Solutions
At Coates Hire, we have been providing a wide range of specialist equipment and services for over 130 years. We pride ourselves in providing much more than just our product range. Our specialist solutionsteam has a wealth of experience in the provision of:
• Traditional trench shoring• Specialist excavation temporary works• Structural propping solutions• Synchronised jacking• Traffic management• Ground water management• Water treatment solutions
Our aim is to meet our customers’ productivity, safety, environmental and cost managementexpectations.
Our equipment offering is supported by a highly trained and motivated team of qualified engineers,Regional Sales Engineers and Product Specialists. These experts are assisted by knowledgeable hire teams based at specialist supply depots throughout Australia.
Coates Hire has a solid reputation for quality and service, whilst ensuring we meet all of our legislative requirements. No job is too large or too small, we have the equipment and expertise to add value to any construction project and we look forward to servicing your needs.
22 // // 23For further information visit www.coateshire.com.au/productsPropping Equipment Propping Equipment
Key capabilities of the design service
ü Full Temporary Works support packages, including installation services for shoring, propping, traffic and water management solutions
ü Well presented, design solutions using the latest CAD software
ü Method statements, both generic and scheme specific, pictorial or written word
ü Tender support packages for estimators and planning functions including schemes and budget costing
ü Support for site teams to develop best solutions and cost effective design options to keep within timescales and budget expectations
ü Risk Assessments both generic and scheme specific
ü Safety in design
ü Competitive pricing solutions
ü Develop safe and sustainable solutions
ü Training and coaching of site staff in all products via a range of tool box talks and ongoing support to help keep projects on track and provide safest possibleworking environment
ü Advice and support on installation and extraction techniques
ü Engineering design sign off and installed equipment sign off available both internal and third party
PARTS LISTPART NUMBERQTYITEM
STANDARD TILT PROP167SYSTEM-30-BEAM-2000368SYSTEM-30-BEAM-100049SYS30-JACK ASSEMBLY810SYSTEM 30-SH RACK BRACKET ASSY411SYSTEM-30-BEAM-05001212SYSTEM-30-END CONNECTOR12136 m x 2.4 m Steel Road Plate 32 mm thick214Hard Wood Full Sleeper- 200 x 100 , 2400 long2016
1
1
2
2
3
3
4
4
A A
B B
C C
D D
RMS, Southern Road Service Concept
S.Raina
22/03/2013
This design is the property of COATES HIRE Ltd. A.B.N 99 074 126 971
STANDARD DISCLAIMERTHE ADVICE PROVIDED IN THIS DOCUMENT (TOGETHER WITH ANY DRAWINGS, IF APPLICABLE) HAS BEEN PREPARED AND DESIGNED, BASEDSOLELY UPON THE INFORMATION, WEIGHT, LOAD BEARING DATA, SURFACE CONDITIONS AND THE REQUIRED USE OR PURPOSE PROVIDEDBY THE CUSTOMER. COATES HIRE HAS NOT, NOR WAS IT REQUIRED BY THE CUSTOMER, TO VERIFY THE ACCURACY OF ANY INFORMATIONOR DATA PROVIDED. IT IS STRONGLY RECOMMENDED THAT THE CUSTOMER OBTAIN INDEPENDANT ADVICE AND A REVIEW OF THE MATERIAL AND INFORMATIONCONTAINED IN THIS DOCUMENT. COATES HIRE DOES NOT WARRANT THE ADVICE AND MATERIAL CONTAINED IN THE DOCUMENT AS SUITABLE FOR ANY OTHER PURPOSE OREVENT OTHER THAN THOSE PURPOSES OR EVENTS PROVIDED BY THE CUSTOMER. COATES HIRE DENIES ANY LIABILITY IN THE CASE OFDAMAGE TO PROPERTY OR INJURY TO PEOPLE CAUSED THROUGH THE INCORRECT OR IMPROPER USE OF THE ADVICE OR MATERIALCONTAINED IN THIS DOCUMENT OR IF THE ADVICE WAS USED FOR A PURPOSE OTHER THAN THAT SPECIFIED BY THE CUSTOMER TO COATESHIRE. SUBJECT TO ANY OTHER TERMS OR CONDITIONS CONTAINED WITH THE SUPPLY OF THIS SERVICE, LIABILITY OF COATES HIRE ARISING FROMTHIS ADVICE (INCLUDING NEGLIGENCE) IS LIMITED TO FIVE TIMES THE FEES PAID FOR THE PROVISION OF THIS SERVICE.
Drawn By
Drawing Number
Date
BU
Thornes Bridge SupportConcept ( four required)
CLIENT
NOTES-All connections for System 30 must be fastened using 4 of M18 nuts, bolts & washers positioned in the corner holes.-For connecting Tilt Props, use 1 of M18 Nut & Bolt on each end-Please note that this drawing is issued for confirming dimensions only. The foot pint and the height of the tower will be changed according to the dimensions required. Parts list shows all components required to construct 1 complete tower as shown. Four of these will be required, two on eac side.- The Qty required will change if the dimensions are changed dimensions.
PLAN VIEW
FRONT ELEVATION SIDE ELEVATION
ISOMETRIC
5000
4690
6000
2400
400-
610
7000
400-
610
10032
10
9
8
12
7
11
14
16
1.0m EXT. 5.0m EXTENSION 3.0m EXTENSION
1.0m EXT.
5.0m EXTENSION
3.0m EXTENSION
1.0m
EXT
.
5.0m
EXT
ENSI
ON
3.0m
EXT
ENSI
ON
HYDR
AULI
C RA
M
1.5m
EXT
.
5.0m
EXT
ENSI
ON
HYDRAULIC RAM 1.5m EXT.5.0m EXTENSION
HYDRAULIC RAM
1.5m EXT.
5.0m EXTENSION
ALL DIMENSIONS ARE IN mmDISCLAIMER1. This design is provided to You subject to the Coates Hire Terms of Hire andSpecial Conditions as amended from time to time.2. Any designs, calculations, drawings, specifications and sketches produced byUs for You are prepared solely on the information supplied by You and We arenot responsible for the accuracy of the details contained therein.3. All designs, calculations, drawings, specifications and sketches produced byUs are indicative only and are prepared for the sole purpose of assisting You inassessing and comparing quotations.4. You acknowledge and agree that We are not liable for any loss or damagearising from the use of such designs, calculations, drawings, specifications andsketches. You indemnify Us against all liability, claims, damage, loss, costs andexpenses (including, without limitation, legal fees, costs and disbursements ona full indemnity basis, whether incurred or awarded against Us and anyenvironmental loss, cost, damage or expense) in respect of:(a) personal injury;(b) damage to tangible property; or(c) any claim of direct or indirect loss or damage by a third party, in relation toYour use or reliance on the designs, calculations, drawings, specifications andsketches produced by Us.5. You warrant that You will seek Your own independent advice from a qualifiedprofessional in relation to the proper installation and use of the ProppingEquipment for Your required purpose. Prior to the hire, You must advise us ofyour Propping Equipment requirements upon receipt of advice from thequalified professional, including any proposed alterations and adjustments thequalified professional requires to any designs, calculations, drawings,specifications and sketches provided by Us.6. You acknowledge that We have made the operating and safety instructionsfor the Propping Equipment You have hired available to You to read.7. Subject to clause 16 of the Terms of Hire and the general waiver of liabilitycontained therein, We are additionally excluded from all liability related to thehire and use of the Propping Equipment by You, including, but not limited to,liability arising from:(a) damage to all adjacent or surrounding structures and(b) damage to utilities or services.NOTES
1. All bracing components to be restrained withhanging chains connected at the positionsindicated in this drawing.
2. Frame 1 & 2 to be restrained directly to the top ofthe sheet pile.
3. Frame 3 to be restrained directly to the undersideof Frame 2.
4. Suitable edge protection to be supplied by thecontractor.
5. Suitable means of access/ egress to be supplied bythe contractor.
6. Appropriate site specific risk assessments shouldbe performed by the contractor prior tocommencement of any work.
7. This design has NOT been certified
HANGING CHAINS(To be attached at these
locations in accordance withthe installation instructions)
HANGING CHAINS 18 No.
Mega Brace Hydraulic Ram
Mega Brace 3.0m Beam Extension
Mega Brace 5.0m Beam Extension
Mega Brace 1.5m Beam Extension
Mega Brace 1.0m Beam Extension
Mega Brace 10.0m Beam Extension
Mega Brace 7.0m Beam Extension
1,120kg
410kg
585kg
760kg
1,120kg
1,475kg
2,008kg
Schedule of Weights: MEGA BRACE
Item Description Item Weight
Mega Shear Clamp 120kg
194kg
Schedule of Weights:TRENCH SHEETING
Item Description Item Weight
6.0m STS500/6 Trench Sheet
ISSUED FORCONSTRUCTION
Title
PROJECT NUMBER
Client
FAX: (02) 9829 2177PH: (02) 8796 5000
46 Williamson Road Ingleburn NSW 2565www.coateshire.com.au
A.B.N: 99 074 126 971
REV DATE COMMENTSA 19/10/13 PROPOSAL
DESIGNED DRAWN CHECKED DATE FIRST ISSUE
REVISIONDWG NUMBER
0 0.5 2mscale @
1:75PAPER SIZE: A3 SCALE: AS INDICATED
1.51
B 21/10/13 PROPOSALC 18/12/13 PROPOSALD 18/03/14 ISSUED FOR CONSTRUCTION
Access Air & Air Accessories Compaction Concrete & Masonry Earthmoving Floor and Cleaning Equipment Generators & Power Distribution Industrial tools & Equipment
Ladders & Scaffold Landscaping Lift & Shift Lighting Materials Handling Portable Buildings & Toilets Propping Pumps & Fluid Management
Shoring Tools & Equipment Traffic Management Training (RTO) Trucks, Vehicles & Trailers Welding
COATES HIRE’S AVAILABLE PRODUCT RANGE:
At Coates Hire, you’ll find an unmatched range of equipment, available and ready to hire. We stock Australia’s largest fleet from general hire gear and specialist products, to total site solutions.With the largest branch network in Australia, you are backed by one of the country’s largest deliverynetworks.
24 // For further information visit www.coateshire.com.au/productsPropping Equipment
While Coates Hire makes every effort to supply the equipment described and pictured in this brochure, all equipment offered is subject to availability. Should Coates Hire through whatever circumstances need to offer an alternative make or model, customers can be assured that this will be of the same quality as the item shown or displayed in this brochure. All information about equipment in this brochure is to the best of our knowledge correct, but we would urge customers to check all details at the time of hire or enquiry. Coates Hire reserves the right to change information without prior notice.