ALUMINUM SACRIFICIAL ANODES CATALOG

5900 Fairbanks N. Houston Rd, Houston, TX 77040 Phone: (713) 690-6100 l Fax: (713) 690-6102

www.anodico.com1

ANODICO CORPORATIONCorrosion Prevention and Critical

Subsea Asset Protection

ANODICO CORPORATION mold fabrication department has the capability of:

• Designing and fabricating any type, size, and configuration to deliver the best FIT FOR PURPOSE ANODE

• Most molds can be fabricated in 48hrs. and start product delivery within 72hrs.

Scan this with your mobile device for Anodico Linkedin

www.anodico.com

ANODICO can manufacture any chemical composition for aluminum and zinc alloys.

ELEMENT Minimum (wt. %) Maximum (wt. %)Zinc (Zn) 2.5 5.75Indium (In) 0.016 0.040Silicon (Si) --- 0.12 MaxCopper (Cu) --- 0.003 MaxIron (Fe) --- 0.09 MaxCadmium (Cd) --- 0.002 Max

Mercury (Hg) 0.000% 0.000%

Others --- 0.02 Max ea.Aluminum (Al) Remainder

Al-Zn-In Anode Chemical Composition for Shallow Water (SHA) Applications

Al-Zn-In Anode Chemical Composition for Deep Cold Water (DCW)Applications

ELEMENT Minimum (wt. %) Maximum (wt %)Zinc (Zn) 4.75 6.0Indium (In) 0.016 0.025Silicon (Si) 0.08 0.12Copper (Cu) --- 0.003 MaxIron (Fe) --- 0.06 MaxCadmium (Cd) --- 0.002 Max

Mercury (Hg) 0.000% 0.000%

Others --- 0.02 Max ea.Aluminum (Al) Remainder

Al-Zn-In Anode Chemical Composition for MIL-A-24779

ELEMENT Minimum (wt. %) Maximum (wt %)Zinc (Zn) 4.0 6.5Indium (In) 0.014 0.020Silicon (Si) 0.08 0.20Copper (Cu) --- 0.004 MaxIron (Fe) --- 0.09 MaxOthers --- 0.02 Max ea.Aluminum (Al) Remainder

www.anodico.com

For Quality Control, ANODICO’s electrochemical testing follows laboratory methods and procedures to determine the potential and current capacity characteristics of Aluminum base and Zinc base anode materials used for Cathodic Protection. It provides a means for screening various heats or lots of anodes to determine performance consistency on a regular basis from lot to lot, according to: NACE-TM0190, DNV-RP-B401 (Annex B) and ISO 15589-2 (Annex E).

Acceptance Criteria for Weight-Loss Current Capacity Test

Range of

Evaluation

Results Alloy

Operating

Potential

(SCE(A)-mV)

(% Efficiency)

Impressed Current

Capacity

A-h/kg A-h/lb

Alloy Density

lb/in3

Al-Zn-In 1,032 to 1,140 90+ 2,354 to

1,068 to

0.1006 – SHA

0.1009 – DCW

Zinc 969 to 1,051 98+ 754 to 804 342 to 365 0.249278

Anode Sample Before14 day Mass Loss Method Test

Anode Sample After14 day Mass Loss Method Test

Platform Anodes 6-9

www.anodico.com4

Bracelet Anodes 10-21

Subsea Structures, Piers,Pilings, and Ballasts Anodes 22-24

Tanks & Vessels Anodes 25-28

www.anodico.com4

Hull Anodes 31-32

Condenser Anodes 29-30

PLATFORM

ANODICO’S Platform anodes are casted with the highest-purity raw materials (Al-Zn-In).

Standard configurations are shown in pages 6-9.

Platform anodes are available in a variety of weights anddimensions with any specified core configuration to fit yourneeds.

Please contact us with your custom specifications.

NOTES:

1. Net weight based on Aluminum alloy.

2. Anodes also available in Zinc. Weights and dimensionsaccording to customer specifications.

www.anodico.com5

www.anodico.com6

www.anodico.com7

www.anodico.com8

BRACELET

ANODICO’S Aluminum Bracelet anodes are casted withthe highest-purity raw materials (Al-Zn-In).

Aluminum Bracelet anodes are available in a variety ofweights and dimensions with any specified coreconfiguration to fit your needs.

NOTES:

www.anodico.com9

ELET A

www.anodico.com10

www.anodico.com

SUBSEA STRUCTURES, PIERS, PILINGS, BALLASTS

ANODICO’S Anodes for Subsea Structures, Piers, Pilingsand Ballasts, are casted with the highest-purity rawmaterials (Al-Zn-In).

Anodes for Subsea Structures, Piers, Pilings and Ballastsare available in a variety of weights and dimensions, andwith any specified core configuration to fit your needs.

NOTES:

www.anodico.com12

www.anodico.com23

5900 Fairbanks N. Houston Rd, Houston, TX 77040Phone: (713) 690-6100 l Fax: (713) 690-6102

www.anodico.com24

HEATER TREATER, TANKS &VESSELS

ANODICO’S Heater Treater, Tanks & Vessels anodes arecasted with the highest-purity raw materials (Al-Zn-In).

Heater Treater, Tanks & Vessels anodes are available in avariety of weights and dimensions with any specified coreconfiguration to fit your needs.

NOTES:

2. Heater Treater Anodes can be supplied withRedhead/Bluehead caps and jam nuts upon customer’srequest.

www.anodico.com25

www.anodico.com26

www.anodico.com27

www.anodico.com28

CONDENSER ANODES

ANODICO’S Condenser anodes are casted with thehighest-purity raw materials (Al-Zn-In).

Condenser anodes are available in a variety of weights anddimensions with any specified core configuration to fit yourneeds.

NOTES:

www.anodico.com29

www.anodico.com30

ANODICO’S Hulls anodes are casted with the highest-purity raw materials (Al-Zn-In).

Standard configurations are shown in page 31-32. Hullsanodes are available in a variety of weights anddimensions with any specified core configuration to fit yourneeds.

NOTES:

3. Cores for Zinc anodes are galvanized

www.anodico.com28

www.anodico.com32

ALUMINUM SACRIFICIAL ANODES CATALOG

Documents

Transcript of ALUMINUM SACRIFICIAL ANODES CATALOG

Corrosion Control Acceptance Criteria for Sacrificial ... · A5 Standard-Potential, Magnesium-Alloy Anodes for Use in Water 24 A6 Standard-Size, High-Potential, Magnesium-Alloy Anodes

Marine Sacrificial Anodes · 2017-12-30 · z.b.a. vassilios zymaris sacrificial anodes 5 hull anodes zinc cast plate - bolt on product code anode length anode width mm anode thickness

Cathodic Protection Systems Use of Sacrificial or Galvanic Anodes on in-Service Bridges

MME Sacrificial Anodes booklet

ZINC RIBBON ANODES FOR · 2020. 3. 23. · on buried pipelines, for A.C. mitigation on pipelines, for sacrificial cathodic protection of secondary bottoms on above-ground storage

GS EP COR 202 en Monitoring System for Sacrificial Anodes

Sacrificial Anodes - Anodes Direct · Anodes • Zinc and Aluminium Anodes • Weld-on Hull Anodes • Bolt-on Hull Anodes • Bolt-on Disc Anodes . Since MME Group controls the entire

SACRIFICIAL ALUMINIUM ANODES FOR TANK APPLICATIONS · calculate anode requirements for all types of structure. Availability Wilson Walton have developed a number of aluminium and

Cell Testing of Metal Anodes for Aluminum Electrolysis

Aluminum Anodes 2010

page1 zinc aluminum anodes cover

GaUS Sacrificial Anodes Catalog

Magnesium H-1 Soil Anodes · Magnesium H-1 Soil Anodes Packaged Anodes are prepackaged in a cardboard carton ... Alloy Composition Element Aluminum Zinc Manganese (Mn) Impurities

SACRIFICIAL ALUMINIUM ANODES FOR HULL APPLICATIONS …ctsonline.com/wp-content/uploads/2017/08/SACRIFICIAL-ALIMINIUM... · SACRIFICIAL ALUMINIUM ANODES FOR HULL APPLICATIONS Application

ELECTROCHEMISTRY · chemical cell, corrosion, galvanization, the use of sacrificial anodes, and electroplating. Throughout Electrochemistry the example of a robot subject to "heart

Performance of the sacrificial galvanic anodes in ...PERFORMANCE OF THE SACRIFICIAL GALVANIC ANODES IN ... Once corrosion is initiated, corrosion cell created and ... The anodes take

KPSI User’s Manual - Instrumart · Sacrificial Anodes provide cathodic protection against galvanic ... at the termination or user ... Level and Pressure Transducers User’s Manual

Understanding Sacrificial Anodes on Ship

FINAL REPORT EVALUATION OF ANODES FOR · PDF fileEVALUATION OF ANODES FOR GALVANIC CATHODIC PREVENTION OF STEEL CORROSION IN PRESTRESSED CONCRETE PILES ... sacrificial anode for galvanic

SACRIFICIAL ANODES · Please contact us for advice on optimizing an anode to suit your specific requirements. • Weight based on Aluminum alloy; also available in Zinc alloy. •