Warranty1 year on flex pole shaft, bases & hinge
C-netB-netDrill bitsBarrier TapeSlalom poles & stubbiesSlope marking & caution poles
Race bibsGate panels
Radio chest pack
has in just a few years established itself as a major slalom pole supplier in Europe.Not at all surprising considering:
Featherbase easeThe Featherbase used on Break-A-Way (BAW) slalom poles generates massive time sav-ings both in course setting as well as course removal. In none favorable snow conditions the savings will be even greater due to that nothing stays put like the Featherbase. Not even in dry cold snow, and therefore greatly limits course maintenance. Time that can better be spent on training and coaching, or running smooth competition events.
NEW! MID FeatherbaseOffers less recistance during course pulling, yet great performance. A great alternative for those that feel the Featherbase can be tough to pull out off the snow yet seek featherbase stay-put performance.
Shafts now with even greater durabilityBAW shafts have been among the most du-rable on the market. Since Nov. 2013 a new Polycarbonate compound was taken in to use, and since warranty claims are less than half of before.
Now with greatly improved hinge. The BAW hinges have often been considered the poles weakness. No longer! Since a year back it has been improved, and warranty claims have since almost disapeared!
WarrantyWe are so confident in our product that we offer a 1 year warranty on all flex-pole shafts, bases and flexes. The past seasons this has resulted in less than 3% average warranty claim rate.
WeightBAW gates are about 10% lighter than many competitors’ gates using metal hinges. It may not sound like allot, but matters when one carries 20-30 gate bundles.
HistoryBAW do not have as short history as one may think. It all originated in Östersund, Sweden. Liftbyggarna produced in the late 70's some of the very first flex plastic poles, that also where sold in North America. As Lift-byggarna decided to concentrate on lift building, US Reliable Racing Sup-ply (RRS) were given the permission to continue with what today is Break-A-Way slalom poles. And the first hinged poles ever to be used in a WC-event where BAW in Waterville Valley 1980. BAW was the official supplier of the Nagano Olympics as well as the WC-finals and World Championships in Vail. Since 2000 all WC-events at Beaver Creek have been run with BAW gates, and the Vail/Beaver Creek world championship will again be run with BAW gates in 2015.
BAW Product rangeWe have worked hard to include only products with extreme durability and function.Nothing ele is worthy the Break-A-Way name!.
The Break-A-Way collection offers the full range of 31mm A-poles, 27mm B-poles, 27mm shorter C-poles, 25mm C-poles, as well as a range of options for outside poles. The com-ponents are easily interchangeable.
#42
689,
31m
m F
eath
erba
se fl
ex p
ole,
172
cm s
haft
.
#44
083,
31m
m F
eath
erba
se L
ite s
tatic
pol
e, 1
72cm
sha
ft.
#PC
215,
31m
m P
olyc
arbo
nate
out
side
pole
, 215
cm.
#PC
215W
, 31m
m P
olyc
arbo
nate
out
side
pole
215
cm lo
ng, w
ith 3
0cm
long
hos
e m
ount
ed a
t bot
tom
al
low
s a
snug
fit i
nto
sam
e siz
e ho
les
that
Fea
ther
base
sho
uld
be m
ount
ed in
to.
#42
690,
27m
m F
eath
erba
se fl
ex p
ole,
163
cm s
haft
.
#44
452,
27m
m F
eath
erba
se L
ite s
tatic
pol
e, 1
63cm
sha
ft.
#27
Jr, 2
7mm
MID
Fea
ther
base
flex
pol
e, 1
37cm
sha
ft.
#10
100,
25m
m M
ID F
eath
erba
se fl
ex p
ole,
137
cm s
haft
.
A-p
ole
B-po
le
C-p
ole
C-p
ole
#42
827
Feat
herb
ase
Lite
.
#42
641
Feat
herb
ase.
#443
54 31
mm ed
ge pr
otecto
r.#4
3044
27mm
edge
prote
ctor.
#428
69 25
mm ed
ge pr
otecto
r.
#42
170
flex.
#415
93 Po
le sto
pper.
#42
738 3
1mm
repla
ceme
nt sh
aft 1
72cm
.#
4438
0 27m
m re
lacem
ent s
haft
163c
m.#
4173
1 27m
m re
lacem
ent s
haft
137c
m.#
4437
6 25m
m re
place
ment
shaf
t 137
cm.
Prices excluding 25% VAT and freight cost.
A-p
ole
B-po
le
#20
000
MID
Fea
ther
base
.
#10
200,
31m
m M
ID F
eath
erba
se fl
ex p
ole,
172
cm s
haft
.
#10
000,
27m
m M
ID F
eath
erba
se fl
ex p
ole,
163
cm s
haft
.
#PC
160,
31mm
Polyc
arbo
nate
outsi
de po
le, 16
0cm.
#PC
160W
, 31m
m Po
lycar
bona
te ou
tside
pole
160c
m lon
g, wi
th 30
cm lo
ng ho
se m
ount
ed
at bo
ttom
allow
s a sn
ug fit
into
same
size
holes
that
Feat
herb
ase s
hould
be m
ount
ed in
to.
#42
691,
60cm
Slalo
m Stu
bbie
with
Feat
herb
ase L
ite.
#
4403
6, 60
cm re
place
ment
Stub
bie sh
aft.
#42
844,
40cm
Snow
boar
d Stu
bbie
with
Feat
herb
ase L
ite.
#42
828,
40cm
repla
ceme
nt St
ubbie
shaf
t.
#42
825,
Comp
. Flex
Stub
bie 50
mm x
42cm
with
Feath
erbas
e Lite
.
#428
66, C
omp.
Stubb
ie no
Flex
, 50m
m x 4
2cm w
ith Fe
atherb
ase Li
te.
#42501, 15m measur-ing tape.
#42500, 30m measur-ing tape.
#44084 Brush marker 25cm, green or Pink.#RCP10 Robust Radio Chest Pack
adjustable to radio size. Includes 3 practical pockets and pencil holder.
#RPC10b like RCP10 with additional custom printable pocket lid.
Pric
es e
xclu
ding
25%
VA
T an
d fre
ight
cos
t.
BXF654D
#HT1000reel in plastic with two connector shanks for two different rewinding gears.
BXF654Caution panel 95x115cm. Individually digital printed with any info customer desires. No minimums.
#HT300300cm durable Cable real in metal. Holds 270m of 25mm barrier tape.
#4183125mm 90m long orange bar-rier tape.
#4183350mm 90m long orange bar-rier tape.
#44054b, Poly-fence hook with 50mm metal ring for barrier tape mounting.
#PC160, Poly-fence pole 31mm 160cm, red or blue.
#JONSnow Shaper in Dural-alu-minum.
#50040078, 200m 10mm Polyethylene UV stabilized rope available in red, blue and yellow/black.
#33010012, 30m long signal lints on 12mm rope, with red, blue and yellow PVC flags.
Prices excluding 25% VAT and freight cost.
After many requests we finally de-cided to develop a range of special Kids ski playground items. Since before we already offer low Speed-fences.Now we have added different turning aids as well as a kids ski lift entrence arch. All of these can be digitally custom printed with almost any print design.
#FUN10 Kids lift entrence arch 120x140x-30cm, with foam core and Cordura bottom reenforcement. Can be mounted on PB80 or PC80W poles.
#FUN30 Kids stump turning aid o30x45cm with foam core. Can be mounted on PB60 or PC60W poles or a Snow-board Stubbie.
#FUN20 Kids figure turning aid 60x100x10cm with foam core. Can be mounted on PB60 or PC60W poles or a Snowboard Stubbie.
A selection of poles to mount FUNSKI items on. From inexpen-sive PC60 & PC80, to PC60W & PC80W that won’t come undone as easily. To Snowboard Stubbie that offers additional flex.
#42
844,
40cm
Snow
boar
d Stu
bbie
with
Feat
herb
ase L
ite.
#PC
60W
, 60c
m lon
g 32
mm P
olyca
rbina
te p
ole w
ith 3
0cm
hose
.
#PC
60, 6
0cm
long 3
2mm
Polyc
arbin
ate p
ole.
#PC
80W
, 80c
m lon
g 32
mm P
olyca
rbina
te p
ole w
ith 3
0cm
hose
.
#PC
80, 8
0cm
long 3
2mm
Polyc
arbin
ate p
ole.
#41695 Launch pads.These should be part of every serious start arrangement in order to avoid ski pole holes, stuck ski poles, and maintain consitent starting conditions throughout the event, regardless of snow conditions. Heavy duty 33x33cm rubber construc-tion with anti slip borrom surface that does not require icing down to stay put.
#41265, 19mm drill bit for 15mm Fiberglass poles.
#SLO32, 32mm drill bit for Polyfence poles.
#SLO35, 35mm drill bits for B-net poles and screw bases.
#SLO38, 38mm drill bits for screw bases on glacier ice, and Featherbase.
#SLO41, 41mm drill bit optimal for Featherbase gates.
#SLO41/24, 41mm drill bit with 24cm stopper to be used in ski domes with drilling restricti ons.
Milwaukee M18 FUELCompact extremely Heavy dutydrill driver with brushless motor,overload protection, powerindicator, 1850 rpm 70 Nm, 2 Li-ion 18V 4A batteries and charger, metal chuck and 3 year warranty.Long lasting batteries that retains strength also in coldtemperature.
Metal drill bitsHigh qualíty double hard metalpoints with triangular shank.50cm length.
#BAWL50Brush marker carrying case. With zip-openings in both ends. Att aches in pant belt. Holds at least 20 markers.
#BAWL40Pole carrying harness. Holds at least 25 gates. Saves the back and makes set-ting courses on your own easy.
#BAWL60Stubbies carry-ing case. Holds at least 30 Stubbies.
#QClip80 pole strap, Heavy duty 80cm red 8mm elastic cord with quickclip look.
OrangeFox metallicplastic drill bits.The first drill bit of its kind.Extremly light weight and shaped to maximize upward snow & ice transport. Incorporates two rotatable hexa-gon hard metal points that can be rotated 6 times to obtane optimal sharpness.Can also be exchanged for new ones.Length 50cm, with triangular shank.
OF45mm for Featherbase,
OF41mm for Featherbase,
OF38mm,
OF35mm for B-net poles,
OF32mm for C-net poles,
#42876 B-net sliding hook with quick release lever.
#SPA2x20, 50x50mm B-net 2m high and 20m long knotless polypropylene lightweight yet extremely durable and UV-resistant. Available in red and blue.
#SPA1.5x20, 50x50mm B-net 1.5m high and 20m long knotless polypropylene lightweight yet extremely durable and UV-resistant. Avail-able in red and blue.
#PC
35/2
50 B-
net p
ole fo
r 2m
high n
et.
#PC
35/2
00 B-
net p
ole fo
r 1.5m
high
net.
B-net mounting.B-net is a safety net and must be mounted according to FIS-recommendations that in the event of a competition will be controlled and approved by a TD.B-net can have poles mounted every 1m, 1.5m or 2m , and be in rows of one, two or three net parallel to one another depending on the speed and terrain. In the case of parallel B-net they must be placed 2.5m apart so that the first net can lay back flat with-out elevating the skier way up or over the next B-net.
If the speed requires several B-net, but the terrain offers only room for one, then A-net is the only solution.
Several B-net in a row most overlap one another, with the lower one behind the upper one, and be tied together so that there is no chance that the skier can pass in-between the two B-nets.
Prices excluding 25% VAT and freight cost.
Where the two nets should be tied together
Mounting of B-netSince the poles offer some elasticity, this elasticity can be used to generate the tension needed to keep the B-net stretched. Start by using the proper 35mm drill bit and drilling the first B-net pole hole at a 10-20 degree angle away from the net. Then the rest of the poles straight up and at such a distance from the previous pole that the fence is all stretched out. And finally end with again drilling the hole for the last B-net pole at a 10-20 degree angle away from the net to generate a pulling tension outwards at both ends of the B-net.
This same technique works very well on C-net as well
B-net can be arranged in many ways, not limited to examples below. However, these are the most common alternatives. This page illustrates how the different alternatives also effect the total price.
Alternative A.20m B-net with 2m pole spacing = 11 poles, each with 2 hooks (1 net + 11 poles + 22 hooks).
Alternative B.20m B-net with 2m pole spacing without end poles and 1m hanging ends. 10 poles, each with 2 hooks (1 net + 10 poles + 20 hooks).
Alternative C.20m B-net with 1.5m pole spacing = 14 poles, each with 2 hooks (1 net + 14 poles + 24 hooks).
Alternative D.20m B-net with 1.5m pole spacing without end poles and 0.75m hanging ends. 13 poles, each with 2 hooks (1 net + 13 poles + 26 hooks).
P1.2+FG. Poly-fence 1.2m high with sewn tunnels and Fiberglass poles
C-net or so called “Crowd control fencing” is not primar-ily used in order to stop high speed skiers from crashing into objects and hurt them-selves. But to keep areas nice and tidy looking at the same time as one directs people/crowds to where one wants them to be or go. Examples are lift lines, competition start or finish areas or kids ski school areas. We offer a variety of different C-net to fit most needs with different heights, colors and mesh count.
C-net with 1x1cm mesh in UV-stabelized high tenecity Polyethyl-ene, availabe in 1.2, 0.6 and 0.3m height.High visability fence that ski poles and boot buckles won’t catch on. Therefore Ideal for lift lines.
Recycle broken slalom pole sh-aftsOur C-net with sewn tunnels makes it possible to cut re-mains of broken old slalom pole shafts down to size to be reused as C-net fence poles. The uncomplicated mounting procedure makes it easy for anybody to slide in and secure the poles in to the sewn fence tunnels.
P0.3+PC. Poly-fence 0.3m high with sewn tunnels and PC poles.
P0.6+FG. Polyfence 0.6m high with sewn tunnels and Fiberglass poles
120cm high Polyfence.50m roll PF1.2 L50 With sewn in tunnel every 2.5m.5m P1.2+L05 7,5m P1.2+L7.5 10m P1.2+L10 15m P1.2+L15 20m P1.2+L20 With 160cm Polycarbonate poles every 2.5m inside sew tunnels.5m P1.2+PC,L05 7,5m P1.2+PC,L7.5 10m P1.2+PC,L10 15m P1.2+PC,L15 20m P1.2+PC,L20 With 162cm Fiberglass poles every 2.5m inside sew tunnels.5m P1.2+FG,L05 7,5m P1.2+FG,L7.5 10m P1.2+FG,L10 15m P1.2+FG,L15 20m P1.2+FG,L20
30cm high Polyfence.50m roll PF0.3 L50 With sewn in tunnel every 2.5m.10m P0.3+L10 15m P0.3+L15 20m P0.3+L20 With 160cm Polycarbonate poles every 2.5m inside sew tunnels.10m P0.3+PC,L10 15m P0.3+PC,L15 20m P0.3+PC,L20 With 162cm Fiberglass poles every 2.5m inside sew tunnels.10m P0.3+FG,L10 15m P0.3+FG,L15 20m P0.3+FG,L20
60cm high Polyfence.50m roll PF0.6 L50 With sewn in tunnel every 2.5m.5m P0.6+L05 10m P0.6+L10 20m P0.6+L20 With 160cm Polycarbonate polesevery 2.5m inside sew tunnels.5m P0.6+PC,L05 10m P0.6+PC,L10 20m P0.6+PC,L20 With 162cm Fiberglass poles every 2.5m inside sew tunnels.5m P0.6+FG,L05 10m P0.6+FG,L10 20m P0.6+FG,L20
Pric
es e
xclu
ding
25%
VA
T an
d fre
ight
cos
t.
C-net with 1x1cm mesh in UV-stabelized high tenecity Polyethyl-ene, availabe in 1.2, 0.6 and 0.3m height.High visability fence that ski poles and boot buckles won’t catch on. Therefore Ideal for lift lines.
C-net with 12x12cm mesh in UV-stabelized high tenacity Polyeth-ylene, availabe in 1.2m height, on roll, with sewn tunnels, and with mounted PC or Fiberglass poles.
We offer a range of fence Fiberglass (FG) and Polycarbonate (PC) poles and hooks to mount C-net on. Either to insert poles in to the sewn net tunnels, or with hooks. With hooks, C-net on roll can be mounted on to fence poles with spacing of choice. Fiberglass poles are stiffer, slightly heavier with less bulk and require 19mm drill bit. PC poles are more elastic and lighter and require 32mm drill bit.
SNOWFENCE is a high vis-ablity allround C-fence that allows wind and snow to pass through. C-net with 6x3cm mesh in UV- stabelized high tenec-ity Polyethylene, availabe in 1.2 and 0.6m height, on roll, with sewn tunnels and with mounted PC or Fiberglass poles.
S1.2+PC,L05. 5m long Snowfence 1.2m high with
sewn tunnels and with PC poles.
C1.2,L25COARSFENCE mounted on fi-berglass poles with hooks.
120cm high Snowfence.50m roll S1.2 L50 With sewn in tunnel every 2.5m.5m S1.2+L05 7,5m S1.2+L7.5 10m S1.2+L10 15m S1.2+L15 20m S1.2+L20 With 160cm Polycarbonate poles every 2.5m inside sew tunnels.5m S1.2+PC,L05 7,5m S1.2+PC,L7.5 10m S1.2+PC,L10 15m S1.2+PC,L15 20m S1.2+PC,L20 With 162cm Fiberglass poles every 2.5m inside sew tunnels.5m S1.2+FG,L05 7,5m S1.2+FG,L7.5 10m S1.2+FG,L10 15m S1.2+FG,L15 20m S1.2+FG,L20
60cm high Snowfence.50m roll S0.6 L50
With sewn in tunnel every 2.5m.5m S0.6+L05 10m S0.6+L10 20m S0.6+L20
With 160cm Polycarbonate polesevery 2.5m inside sew tunnels.5m S0.6+PC,L05 10m S0.6+PC,L10 20m S0.6+PC,L20
With 162cm Fiberglass poles every 2.5m inside sew tunnels.5m S0.6+FG,L05 10m S0.6+FG,L10 20m S0.6+FG,L20
120cm high Coarsefence.25m roll C1.2 L25
PC16
0, 16
0cm
long 3
2mm
PC-p
ole, r
ed or
blue
.
FGS9
5, 95c
m lon
g 15m
m blu
e Fibe
rglass
pole,
With s
teel po
int.
PC95
, 95c
m lon
g 32m
m PC
-pole
, red
or bl
ue.
#44054 Polyfence hook.
FGS1
62H,
162
cm lo
ng 1
5mm
blue
Fiber
glass
pole
. With
ste
el po
int an
d per
mane
ntly
moun
ted h
ooks
.
FGS1
62, 1
62cm
long
15m
m blu
e Fib
ergla
ss p
ole. W
ith s
teel
point
.
FGS9
5H, 9
5cm
long
15mm
Fibe
rglas
s po
le, b
lue. W
ith s
teel
point
and p
erma
nent
mou
nted
hook
s.
Partly digital printed fence with sewn in tunnels every 2.5m.10m PP1.2+L10 20m PP1.2+L20
Partly 50% digitally printed fence with sewn in tunnel and 162cm Fiberglass poles every 2.5m.10m PP1.2+FG,L10 20m PP1.2+FG,L20
of printed banner materials.Printed sections can be placed next to one another, or spaced apart. Facing the same way, or in oposit directions.
The result is a from both sides great looking, yet very practical fence.
Our newly developed Partially Digitally Printed Polyfence combines Polyfence 2.5m seg-ments with equally 2.5m long segments of banner material that has been digitally printed from both sides, with back side mirrored. Half of the 2.5m segments consists of Polyfence and the remaining segments
EVENTFENCE 0.6m high with sewn in tunnel every 2.5m5m E0.6+L05 10m E0.6+L10
EVENTFENCE 0.6m high with sewn in tunnel and 162cm Fiberglass poles every 2.5m.5m E0.6+FG,L05 10m E0.6+FG,L10
EVENTFENCE 1.2m high with sewn in tunnel every 2.5m.10m E1.2+L10 20m E1.2+L20
EVENTFENCE 1.2m high with sewn in tunnel and 162cm Fiberglass poles every 2.5m.10m E1.2+FG,L10 20m E1.2+FG,L20
Screen printing charges:
Start cost for less than 10 im-prints:
Start cost for more than 10 im-prints:
Printing cost for prints up to 1.7m long:
Printing cost for prints up tp 2.5m long:
Contact your local BAW representative for price offer.
Digitally printed ban-ners in durable mesh material offered in any length, up to 145cm height, with metal grommets every 1m.
Banner fence with PC poles, red, blue, black or green.
#PC
215F
YOR
31mm
Fluo
resc
ent Y
ellow
/Blac
k/Or
ange
215c
m ca
ution
pole.
#PC
215
31mm
Red o
r Blue
215c
m PC
pole.
#PC
215F
Y 31
mm Fl
uore
scen
t Yell
ow/B
lack 2
15cm
caut
ion PC
pole.
#21
5OR3
0GR
31mm
Gre
en 21
5cm
slope
mar
king P
C pole
with
30cm
Ora
nge F
luore
scen
t top
.
#21
5OR3
0RD
31mm
Red 2
15cm
slop
e mar
king P
C pole
with
30cm
.
#21
5OR3
0BL
31mm
Blue
215c
m slo
pe m
arkin
g PC p
ole w
ith 30
cm.
#21
5OR3
0BK
31mm
Blac
k 215
cm sl
ope m
arkin
g PC p
ole w
ith 30
cm.
#21
5OR8
0GR
31mm
Gre
en 21
5cm
slope
mar
king P
C pole
with
80cm
.
#21
5OR8
0RD
31mm
Red 2
15cm
slop
e mar
king P
C pole
with
80cm
.
#21
5OR8
0BL
31mm
Blue
215c
m slo
pe m
arkin
g PC p
ole w
ith 80
cm.
#21
5OR8
0BK
31mm
Blac
k 215
cm sl
ope m
arkin
g PC p
ole w
ith 80
cm.
Oran
ge Fl
uore
scen
t top
.
Oran
ge Fl
uore
scen
t top
.
Oran
ge Fl
uore
scen
t top
.
Oran
ge Fl
uore
scen
t top
.
Oran
ge Fl
uore
scen
t top
.
Oran
ge Fl
uore
scen
t top
.
Oran
ge Fl
uore
scen
t top
.
Extr
emel
y du
rabl
e po
lyca
rbon
ate
slope
mar
king
pol
es!
Kids size gate panels 55x44cm with elastic loop attachment to poles.
BXA510 - Single layer gate panel in standard colors. Can be screen printed from one side.BXA610D - Single layer gate panel all digitally printed from one side, bleeding through to back side.BXA611DD - Double layer gate panel all digitally printed from both sides.
None FIS training GS gate pan-els 75x50 with elastic loop at-tachment to poles.
BXA512 - Single layer gate panel in standard colors. Can be screen printed from one side.BXA 612D - Single layer gate panel all digitally printed from one side, bleeding through to back side.BXA514DD - Double layer gate panel all digitally printed from both sides.
FIS homologated GS, SG & DH gate panels 75x50cm with bungee cord to poles and plas-tic tubing inside gate tunnel.
BXR97 - Single layer gate panel in standard colors. Can be screen printed from one side.BXR297D - Single layer gate panel all digitally printed from one side, bleeding through to back side.BXR297DD - Double layer gate panel all digitally printed from both sides.
BXF560D - Single layer all digitally printed from one side.BXF562DD - Double layer gate panel all digitally printed from both sides.BXF664D - Single layer all digitally printed from one side, bleeding through to back side.
Caution panel 95x115cm with elastic loop attachments to poles.
BXF550D - Single layer all digitally printed from one side.BXF552D - Double layer gate panel all digitally printed from both sides.BXF654D - Single layer all digitally printed from one side, bleeding through to back side
Sign panel with elastic loop attach-ments to poles.
BXF570D - 130x95cm single layer all digitally printed from one side.BXF580D - 150x145cm single layer all digitally printed from one side.BXF674D - 130x95cm single layer all digitally printed from one side, bleeding through to back side.
Start & Finish panel 70x170cm with elastic loop attachments to poles.
BXR297D
Contact local sales rep. for price quotation.
Fluorescentcolors
Avaliable standard gate panel fabric colors.
BXS630D - Single layer gate panel all digitally printed from one side, bleeding through to back side.BXS631DD - Double layer gate panel all digitally printed from both sides.
Snowboard SL / SkiX gate FIS-gate panel 105x80x-40cm with bungee cord attachment to poles
BXS532 - Single layer gate panel in standard colors. Can be screen printed from one side.BXS535DD - Double layer gate panel all digitally printed from both sides.
Snowboard SL / SkiX gate panel 105x80x20(40)cm with bungee cord attachment to poles. 20cm low turning pole end with 40cm high tunnel that covers turning pole.BXS533 - Single layer gate panel in standard colors. Can be screen printed from one side.
Snowboard SL / SkiX gate panel 105x80x20cm with bungee cord attachment to poles. 20cm low turning pole end.
Snowboard GS FIS-gate panel 160x100x40cm with bungee cord attachment to poles.BXS537 - Single layer Snowboard GS gate panel in standard colors. Can be screen printed from one side.
Snowboard GS gate panel 160x100x20(40)cm with bungee cord attachment to poles. 20cm low turning pole end with 40cm high tunnel that covers turning pole.BXS538 - Single layer gate panel in standard colors. Can be screen printed from one side.BXS638D - Single layer Snowboard GS gate panel all digi-tally printed from one side, bleeding through to back side.
Snowboard GS gate panel 160x100x20cm bungee cord attach-ment to poles. 20cm low turning pole end.BXS637 - Single layer Snowboard GS gate panel all digitally printed from one side.
BXS630D
BXF562DD
BXS535DD
BXF550DScreen printed gate panels
BXS533
Beyond-X Offers a compre-hensive range of gate pan-els for different purposes.Some are offered with screen printing, others with digital printing, some with single fabric layer, others with double layers.
BXF560DBXF560D
In-house sewing and print-ing capacity makes us flex-ible, fast and extremely re-sponsive.
Alpine stretch bibs are available in 5 differ-ent sizes including FIS size Men’s and Ladies’ race bibs, Kid’s size, a larger Multisport size and the largest Sailing size race bib. They are all produced in high quality very elastic 4-way stretch fabric. Digital printing process allows virtually unlimited number of colors and no order minimums.
This type of race bibs are now spilling over in to a number of other sports. We have even developed a long sleeve race bib for special requirements.
Adult students often reject using a vest. Then a stretch arm band can be a better solution.
Men’s size alpine stretch bibs are also immensely popular as kids ski school vests. Helping the ski instructors to keep track of their group. Cool de-signs and bright colors increases the ski schools attraction.
BXAB480Stretch arm band
BXA310Men’s sizestretch bib
BXSS330Snowboard stretch bib
BXLS326Long sleeve stretch bib
Race bibs can be used in many dif-ferent ways. Some larger ski clubs need bibs to keep track of their young athletes during training sessions. In the nearby example they have used their club race suit print design in a number of color-ation alternatives to separate one group from another.
BXSS330Sailing size stretch bib
BXA312Kid’s size stretch bib
BXA311Ladie’s size stretch bib BXA312
Men’s size stretch bib
BXM315Multisport size stretch bib
BXA312Men’s size stretch bib
Contact local sales rep. for price quotation.
Race bibs of various types, has become a specialty of our factory. With both sewing as well as screen and digital printing inhouse, almost anything is possible. We have been an active part in changing the world from white bibs with a sponsor logo and digits, to all designed race bibs. The athletes wearing or bibs are fast, and so are we!
SkiX race bibs made to FIS specifications for WC-events. Available in FIS men’s and ladies’ sizes as well as kid’s size.
Our most popular SkiX race bibs. Commonly used for ski school classes and therefore also offering an ex-tra small kids size. Other popular use is for race crew where the digital printing process allows many alter-native prints with no minimum order requirements.
Stewards bibs greatly enhances the professional ap-peal of an event. They make it easy to see who is do-ing what? And they present an additional opportunity to sell in a sponsor. We offer a special Stewards bib available in two sizes or the BXR105 SkiX bib for this purpose.
BXSX412Kids size SkiX bib
BXSX411Ladie’s size FIS SkiX bib
BXSX410Men’s size FIS SkiX bib
BXSX420Men’s size SkiX bib
BXSX421Ladie’s size SkiX bib
BXSX422 Kid’s size SkiX bib
BXSX423 Kid’s XS size SkiX bib
BXS451Stewards bib size XL
BXM431M-XL
BXS450M-XXL
Avail
able
edge
band
color
s
B-stedt of SWE ABHåkanbol stn.693 92 DegerforsSWEDEN
Tel : 0586-922 02Fax : 0586-922 05Email : [email protected] : www.beyondx.com
Contact info:
BXSX420Men´s size SkiX bib
Top Related