July 2009
No. 320E
The new and improved communication protocol function is now available!
QJ71C24NQJ71C24N-R2QJ71C24N-R4
Serial Communication ModuleGX Configurator-SC Version 2.20W
Mitsubishi Programmable Controller
Point1Point1Point1Communication is readilyavailable!
Point2Point2Point2 Point3Point3Point3Simple
andquick!
Increasingefficiency!
Easier-to-use than
ever!
0123456789ABCDEF
External communication devices(external devices)GX Configurator-SC
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
Reduced to approx. 1/10Reduced to approx. 1/10Reduced to approx. 1/10
Easy to create/editprotocols!If a desired external device is not in the pre-defined protocollibrary, a protocol for it can becreated/edited easily.
A variety of devices can be connected!
Start communicationquickly only by selectingan external device to be connectedfrom the pre-definedprotocol library.
The number of ladderprogram steps can besignificantly reduced!
Features
Select the manufacturer name, model(series) name and protocol name of an external device.
Write the protocols to a module
Execute the protocols from ladder programs
Previously...
Different protocols for different external devices.Programs would be so complicated...
You no longer need to make complicated protocol settings for communication with an external device.Only select pre-defined protocols from the pre-defined protocol library!
Selecting an external device to be connected from the pre-defined protocol library can start communication quickly.
Write the specified protocols to the QJ71C24N(-R2/R4).Up to 128 protocols can be set per module.
To start communication with the external device, just execute the dedicated instruction in the ladder programs, which start up the protocols.
Communication is readily available!Point1Point1Point1Point1
Now...Just 3 steps before starting communication!
Point2 Point3
1
2
3
Just select!
Point2Point2Point2Point2
If the external device is not in the pre-defined protocol library,
Protocols can be created/edited easily!go to .
Start communication!
Enter
0012233445566778899AABBCCDDEEFF
0123456789AABCDEF
Simpleand
quick!
1
Previously...
The external device to be connected to is not in the pre-defined protocol library.What should I do?
If an external device is not in the pre-defined protocol library, you can create/edit a protocol easily for the communication with the device.
· Select "Add editable protocol"
· Edit protocols
The list view of created protocols allows you to confirm their settings efficiently and edit them easily.
Point1 Easy to create/edit protocols!Point2Point2Point2Point2
Now...I can create/edit protocols easily on the setting screen!
Point3
Point2
Edit protocols as you want!
Easier-to-use than
ever!
2
Previously...
It takes a long time to create ladder programs...
The QJ71C24N(-R2/R4) can be communicated to an external device only by creating and executing simple ladder programs.
Enhanced debugging support functionThe packet data, communication signal wire condition, and state monitor can be confirmed without a network analizer.Simple debugging is now available.
GX Configurator-SCCPU
Point1 Point2 Point3Point3Point3Point3The number of ladder program steps can be significantly reduced!
Another function
Now...An enormous amount of ladder programs are not required!
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
X1036
X20GP.CPRTCL U0 K1 K1 D10
SET M101
SET M102
D10MOV D101
M0
M072
M1
M1
Reducing the number of program steps to
approx. 1/10!(The conventional ratio
of our company)
0123456789ABCDEF
Can shorten a scan time!
Can save space for programs!Point2
Circuit trace Protocol execution log display
Logs including the protocol name, start time and date, end time and date, and result etc. of executed protocols can be stored in the buffer memory on a module.
Data on the transmission line can be stored in the data area on a module.Intermediate devices such as a network analizer etc. are not needed.
Increasingefficiency!
DIC
3
DIC-204
4
July 2009
No. 000E
The new and improved communication protocol function is now available!
QJ71C24NQJ71C24N-R2QJ71C24N-R4
Serial Communication ModuleGX Configurator-SC Version 2.20W
Mitsubishi Programmable Controller
0907 (MDOC) Specifications subject to change without notice.Printed in Japan on recycled paper.
HEAD OFFICE: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPANNAGOYA WORKS: 1-14, YADAMINAMI 5, HIGASIKU, NAGOYA, JAPAN
Sales office
Mitsubishi Electric Automation Inc.500 Corporate Woods Parkway, Vernon Hills, IL 60061, USAMELCO-TEC Rep. Com.e Assessoria Tecnica Ltda. Av Paulista, 1439-Cj. 72 Cerqueira Cesar CEP 01311-200,Sao Paulo, SP, CEP: 01311-200, BrazilMitsubishi Electric Europe B.V. German BranchGothaer Strasse 8, D-40880 Ratingen, GermanyMitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, UKMitsubishi Electric Europe B.V. Italy Branch Viale Colleoni 7-20041 Agrate Brianza (Milano), ItalyMitsubishi Electric Europe B.V. Spanish BranchCarretera de Rubi 76-80E-08190 Sant Cugat del Valles (Barcelona), SpainMitsubishi Electric Europe B.V. French Branch25, Boulevard des Bouvets, F-92741 Nanterre Cedex, FranceCircuit Breaker Industries Ltd.Private Bag 2016, ZA-1600 Isando, South AfricaMitsubishi Electric Automation (Hong Kong) Ltd.10/F, Manulife Tower, 169 Electric Road, North Point, Hong KongMitsubishi Electric Automation (Shanghai) Ltd.17/F Chong Hing Finance Center, No.288 West Nanjing Road, Shanghai 200003, China
Country/Region
USA
Brazil
Germany
UK
Italy
Spain
France
South Africa
Hong Kong
China
Tel/Fax
Tel: +1-847-478-2100Fax: +1-847-478-0327Tel: +55-11-3146-2200Fax: +55-11-3146-2217
Tel: +49-2102-486-0Fax: +49-2102-486-1120Tel: +44-1707-276100Fax: +44-1707-278992Tel: +39-039-60531Fax: +39-039-6053312Tel: +34-93-565-3131Fax: +34-93-589-1579
Tel: +33-1-5568-5568Fax: +33-1-5568-5757Tel: +27-11-928-2000Fax: +27-11-392-2354Tel: +852-2887-8870Fax: +852-2887-7984
Tel: +86-21-2322-3030Fax: +86-21-2322-3000
Sales office
Setsuyo Enterprise Co., Ltd.6F., No.105 Wu-Kung 3rd.Rd, Wu-Ku Hsiang, Taipei Husien 248, TaiwanMitsubishi Electric Automation Korea Co., Ltd.1480-6, Gayang-dong, Gangseo-gu, Seoul 157-200, KoreaMitsubishi Electric Asia Pte, Ltd.307 Alexandra Road #05-01/02, Mitsubishi Electric Building Singapore 159943Mitsubishi Electric Automation (Thailand) Co., Ltd.Bang-Chan Industrial Estate No.111 Soi Serithai 54, T.Kannayao, A.Kannayao, Bangkok 10230 ThailandP.T. Autoteknindo Sumber MakmurMuara Karang Selatan Block A/Utara No.1 Kav.No.11, Kawasan Industri Pergudangan, Jakarta-Utara 14440, P.O. Box 5045 Jakarta 11050, IndonesiaMessung Systems Pvt., Ltd.Electronic Sadan NO: III Unit No.15, M.I.D.C. Bhosari, Pune-411026, IndiaMitsubishi Electric Australia Pty. Ltd.348 Victoria Road, Rydalmere, N.S.W. 2116, Australia
Country/Region
Taiwan
Korea
Singapore
Thailand
Indonesia
India
Australia
Tel/Fax
Tel: +886-2-2299-2499Fax: +886-2-2299-2509
Tel: +82-2-3660-9552Fax: +82-2-3664-8372
Tel: +65-6470-2460Fax: +65-6476-7439
Tel: +66-2-517-1326Fax: +66-2-517-3239
Tel: +62-21-663-0833Fax: +62-21-663-0832
Tel: +91-20-2712-3130Fax: +91-20-2712-8108
Tel: +61-2-9684-7777Fax: +61-2-9684-7245
Device type Manufacturer name RemarkModel (series) name
Product list
Model codeModelChannel 1 Channel 2
InterfaceProduct name
QJ71C24N RS-232-compliance RS-422/485-compliance 1W4565
QJ71C24N-R2 1W4563Serial communication module
QJ71C24N-R4
RS-232-compliance
RS-422/485-compliance 1W4564
(1) Serial communication Module
Model codeModel
SW2D5C-QSCU-E 13PX33GX Configurator-SC Version2
(2) GX Configurator-SC Version2
*Volume licensing is available.
Communication settings can be easily made only by selecting the manufacturer name, model (series) name and protocol.
Communication protocol function opreating environmentItem Compliant version
QJ71C24N(-R2/R4) First five digits of the serial number are 11062 and the function version is B, or later
GX Configurator-SC Version 2.20W or later
Add-in target of GX Configurator-SC GX Developer Version 8.78G or later
GX Configurator-SC Version2 pre-defined protocol support functionFunction Functional overview
Protocol setting Sets/changes protocols to be written to a module.
Write to module/read from module function Writes protocol settings to a module, or reads them from a module.
Support function for debugging communication of a module.
Displays protocol execution logs and protocol execution results on a module in which protocol settings are set.Debugging support function Traces data on the serial line.
Protocol execution log display function
Circuit trace function
State monitor function Monitors current conditions such as XY signals of a module, error information, etc.
Product name
Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Point1Communication is readilyavailable!
Point2Point2Point2Point2Point2Point2Point2Point2Point2Point2Point2Point2Point2Point2Point2Point2Point2 Point3Point3Point3Point3Point3Point3Point3Point3Point3Point3Point3Point3Point3Point3Point3Point3Point3Simple
andquick!
Increasingefficiency!
Easier-to-use than
ever!
0123456789ABCDEF
External communication devices(external devices)GX Configurator-SC
List of external devices compatible with the pre-defined protocol library
RKC INSTRUMENT Single Loop ControllerCB400, FB400
OMRON Modular Temperature ControllerEJ1, E5ZN
Temperature Controller
Modular ControllerDMC10, DMC50
SDC SeriesYamatake
Digital Indicating Controller
Micro Controller XPXR3
Digital ControllerFuji Electric Systems
PXG4, PXH9
General-Purpose Digital Temperature ControllerGeneral-Purpose E5�N (-H)
General-Purpose Digital ControllerE5EK
Compact Laser ScannerDatalogic DS2���N, DS4800
DataMan ID ReaderDataMan100Barcode Reader
Cognex
Inverter FREQROL SeriesMITSUBISHI ELECTRIC
RFID SystemV600, V680ID Controller(RFID)
OMRON
Industrial RFIDBIS SB & PLUS
Position Controller
Program Controller
CON SeriesActuator
SEL SeriesIAI
Communication Protocol
MC Protocol 4C Frame(Format 1,4) MC Protocol QnA Compatible 4C Frame(Format 1,4)MITSUBISHI ELECTRIC
MODBUSSchneider Electric
C-mode Command
FINS CommandOMRON
Reduced to approx. 1/10Reduced to approx. 1/10
Easy to create/editprotocols!If a desired external device is not in the pre-defined protocollibrary, a protocol for it can becreated/edited easily.
A variety of devices can be connected!
Start communicationquickly only by selectingan external device to be connectedfrom the pre-definedprotocol library.
The number of ladderprogram steps can besignificantly reduced!
DIC-204
4
July 2009
No. 000E
The new and improved communication protocol function is now available!
QJ71C24NQJ71C24N-R2QJ71C24N-R4
Serial Communication ModuleGX Configurator-SC Version 2.20W
Mitsubishi Programmable Controller
0907 (MDOC) Specifications subject to change without notice.Printed in Japan on recycled paper.
HEAD OFFICE: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPANNAGOYA WORKS: 1-14, YADAMINAMI 5, HIGASIKU, NAGOYA, JAPAN
Sales office
Mitsubishi Electric Automation Inc.500 Corporate Woods Parkway, Vernon Hills, IL 60061, USAMELCO-TEC Rep. Com.e Assessoria Tecnica Ltda. Av Paulista, 1439-Cj. 72 Cerqueira Cesar CEP 01311-200,Sao Paulo, SP, CEP: 01311-200, BrazilMitsubishi Electric Europe B.V. German BranchGothaer Strasse 8, D-40880 Ratingen, GermanyMitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, UKMitsubishi Electric Europe B.V. Italy Branch Viale Colleoni 7-20041 Agrate Brianza (Milano), ItalyMitsubishi Electric Europe B.V. Spanish BranchCarretera de Rubi 76-80E-08190 Sant Cugat del Valles (Barcelona), SpainMitsubishi Electric Europe B.V. French Branch25, Boulevard des Bouvets, F-92741 Nanterre Cedex, FranceCircuit Breaker Industries Ltd.Private Bag 2016, ZA-1600 Isando, South AfricaMitsubishi Electric Automation (Hong Kong) Ltd.10/F, Manulife Tower, 169 Electric Road, North Point, Hong KongMitsubishi Electric Automation (Shanghai) Ltd.17/F Chong Hing Finance Center, No.288 West Nanjing Road, Shanghai 200003, China
Country/Region
USA
Brazil
Germany
UK
Italy
Spain
France
South Africa
Hong Kong
China
Tel/Fax
Tel: +1-847-478-2100Fax: +1-847-478-0327Tel: +55-11-3146-2200Fax: +55-11-3146-2217
Tel: +49-2102-486-0Fax: +49-2102-486-1120Tel: +44-1707-276100Fax: +44-1707-278992Tel: +39-039-60531Fax: +39-039-6053312Tel: +34-93-565-3131Fax: +34-93-589-1579
Tel: +33-1-5568-5568Fax: +33-1-5568-5757Tel: +27-11-928-2000Fax: +27-11-392-2354Tel: +852-2887-8870Fax: +852-2887-7984
Tel: +86-21-2322-3030Fax: +86-21-2322-3000
Sales office
Setsuyo Enterprise Co., Ltd.6F., No.105 Wu-Kung 3rd.Rd, Wu-Ku Hsiang, Taipei Husien 248, TaiwanMitsubishi Electric Automation Korea Co., Ltd.1480-6, Gayang-dong, Gangseo-gu, Seoul 157-200, KoreaMitsubishi Electric Asia Pte, Ltd.307 Alexandra Road #05-01/02, Mitsubishi Electric Building Singapore 159943Mitsubishi Electric Automation (Thailand) Co., Ltd.Bang-Chan Industrial Estate No.111 Soi Serithai 54, T.Kannayao, A.Kannayao, Bangkok 10230 ThailandP.T. Autoteknindo Sumber MakmurMuara Karang Selatan Block A/Utara No.1 Kav.No.11, Kawasan Industri Pergudangan, Jakarta-Utara 14440, P.O. Box 5045 Jakarta 11050, IndonesiaMessung Systems Pvt., Ltd.Electronic Sadan NO: III Unit No.15, M.I.D.C. Bhosari, Pune-411026, IndiaMitsubishi Electric Australia Pty. Ltd.348 Victoria Road, Rydalmere, N.S.W. 2116, Australia
Country/Region
Taiwan
Korea
Singapore
Thailand
Indonesia
India
Australia
Tel/Fax
Tel: +886-2-2299-2499Fax: +886-2-2299-2509
Tel: +82-2-3660-9552Fax: +82-2-3664-8372
Tel: +65-6470-2460Fax: +65-6476-7439
Tel: +66-2-517-1326Fax: +66-2-517-3239
Tel: +62-21-663-0833Fax: +62-21-663-0832
Tel: +91-20-2712-3130Fax: +91-20-2712-8108
Tel: +61-2-9684-7777Fax: +61-2-9684-7245
Device type Manufacturer name RemarkModel (series) name
Product list
Model codeModelChannel 1 Channel 2
InterfaceProduct name
QJ71C24N RS-232-compliance RS-422/485-compliance 1W4565
QJ71C24N-R2 1W4563Serial communication module
QJ71C24N-R4
RS-232-compliance
RS-422/485-compliance 1W4564
(1) Serial communication Module
Model codeModel
SW2D5C-QSCU-E 13PX33GX Configurator-SC Version2
(2) GX Configurator-SC Version2
*Volume licensing is available.
Communication settings can be easily made only by selecting the manufacturer name,model (series) name and protocol.
Communication protocol function opreating environmentItem Compliant version
QJ71C24N(-R2/R4) First five digits of the serial number are 11062 and the function version is B, or later
GX Configurator-SC Version 2.20W or later
Add-in target of GX Configurator-SC GX Developer Version 8.78G or later
GX Configurator-SC Version2 pre-defined protocol support functionFunction Functional overview
Protocol setting Sets/changes protocols to be written to a module.
Write to module/read from module function Writes protocol settings to a module, or reads them from a module.
Support function for debugging communication of a module.
Displays protocol execution logs and protocol execution results on a module in which protocol settings are set.Debugging support function Traces data on the serial line.
Protocol execution log display function
Circuit trace function
State monitor function Monitors current conditions such as XY signals of a module, error information, etc.
Product name
Point1Point1Point1Communication is readilyavailable!
Point2Point2Point2 Point3Point3Point3Simple
andquick!
Increasingefficiency!
Easier-to-use than
ever!
0123456789ABCDEF
External communication devices(external devices)GX Configurator-SC
List of external devices compatible with the pre-defined protocol library
RKC INSTRUMENT Single Loop ControllerCB400, FB400
OMRON Modular Temperature ControllerEJ1, E5ZN
Temperature Controller
Modular ControllerDMC10, DMC50
SDC SeriesYamatake
Digital Indicating Controller
Micro Controller XPXR3
Digital ControllerFuji Electric Systems
PXG4, PXH9
General-Purpose Digital Temperature ControllerGeneral-Purpose E5�N (-H)
General-Purpose Digital ControllerE5EK
Compact Laser ScannerDatalogic DS2���N, DS4800
DataMan ID ReaderDataMan100Barcode Reader
Cognex
Inverter FREQROL SeriesMITSUBISHI ELECTRIC
RFID SystemV600, V680ID Controller(RFID)
OMRON
Industrial RFIDBIS SB & PLUS
Position Controller
Program Controller
CON SeriesActuator
SEL SeriesIAI
Communication Protocol
MC Protocol 4C Frame(Format 1,4) MC Protocol QnA Compatible 4C Frame(Format 1,4)MITSUBISHI ELECTRIC
MODBUSSchneider Electric
C-mode Command
FINS CommandOMRON
Reduced to approx. 1/10Reduced to approx. 1/10
Easy to create/editprotocols!If a desired external device is not in the pre-defined protocollibrary, a protocol for it can becreated/edited easily.
A variety of devices can be connected!
Start communicationquickly only by selectingan external device to be connectedfrom the pre-definedprotocol library.
The number of ladderprogram steps can besignificantly reduced!
Top Related