NAME: LED PANEL LIGHT
P/N: SNC-0606PL-40WDB1
Advantage
Application
SNC OPTO ELECTRONIC CO., LTD
TECHNICAL DATA SHEET
Tel: +86-755-29683009 Fax: +86-755-29684853 www.snc-lighting.com E-mail:[email protected]
Jump ring
● UL、CUL、DLC certificate● High CRI.● External driver, input voltage AC100-277V.● Output constant current lever can be adjusted through output cable with 0-10V.● Installation type: Embedded、Suspending、 Jump ring.● Housing Color: Silver or White.● Housing Thickness: 10MM.● No UV or IR in the beam.● Easy to install and operate.● Energy saving, long service life.● Light is soft and uniform, safe to eyes.● Instant start, NO flickering, NO humming.● Green and eco-friendly without mercury.
Troffer 2x2 Luminaires for Ambient Lighting of Interior Commercial Spaces.
Suspending
Product name
Light Type
Dimension
Part No
Color temperature
CRI
Lumen
Lumen Efficacy
Input Power
Viewing Angle
Diffusion plate Type
Input Voltage
PFC
Waterproof Rating
LED Type
LED QTY
Housing
Housing color
Cover
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Application
Safety Certification
Warranty Time
SNC OPTO ELECTRONIC CO., LTD
TECHNICAL DATA SHEET
PRODUCT SPECIFICATIONS
LED PANEL LIGHT
PANEL LIGHT
603*603*43 MM(Housing Thickness: 10MM)
Technical Characteristic
SNC-0606PL-40WDB1
4000K、4500K、5000K
>80
4000-4200 LM
100-105 LM/W
40 W
120 Degree
Matte surface
AC100-277V 50/60Hz (0-10V Dimmable)
>0.9
IP41
MATERIALS
0.2W SMD2835
204 PCS
Aluminum
Silver / White
PMMA+PS
OTHERS
-20℃ TO 45℃
20%-70% RH
-30℃ TO 80℃
Tel: +86-755-29683009 Fax: +86-755-29684853 www.snc-lighting.com E-mail:[email protected]
10%-75% RH
Indoor
UL、CUL、DLC
5 Years
SNC OPTO ELECTRONIC CO., LTD
Tel: +86-755-29683009 Fax: +86-755-29684853
www.snc-lighting.com E-mail:[email protected]
TECHNICAL DATA SHEET LUMINAIRE PHOTOMETRIC TEST REPORT
SNC OPTO ELECTRONIC CO., LTD
Tel: +86-755-29683009 Fax: +86-755-29684853
www.snc-lighting.com E-mail:[email protected]
Ⅰ. Embedded or Jump ring
Ⅱ. Suspending
TECHNICAL DATA SHEET
Installation steps
Remove the ceiling plater Connect the wire Put the LED panel on the ceiling
Remove the ceiling plater Fix the panel with rope,and connect the wire
Put the LED panel on the ceiling
SNC OPTO ELECTRONIC CO., LTD
TECHNICAL DATA SHEET
Package
Packag information
Size of Carton 655*195*680 MM
Qty / Carton 4 PCS
Net Weight / Carton 14.2 KG
Gross Weight / Carton 17.0 KG
Notice For User
● Please turn off power before install or change assembly parts.● The input voltage and lamps should be matched, after connecting the power line, please make sure the wiring section is insulated.● No-professionals, must not install and disassemble the lamps.
Trouble Shootings
Troubles Check points
Flickering of the lightTurn off the power and turn on again in 3 minutes. If same phenomena
occur, then call agencies
Out of working Please check the connection
Tel: +86-755-29683009 Fax: +86-755-29684853 www.snc-lighting.com E-mail:[email protected]
Top Related