SWA WORKFLOW
Work Flow Between PT4 and SWAPresentation / Author / Date AssignedDispatchedAcknowledgedAcknowledged [Onsite is captured in Audit trail]ExecutedClose RequestClosedAcceptedWork in progress(onsite) Note: Pending status is optional in between accepted and close requestWO dispatched with key[BCDE]WO A[key]WO O[key]WO C[key]
Presentation / Author / Date
The WO SMS is received by the concerned engineer
The engineer make the WO to Onsite to represent that he/she is working on it.
The engineer sends an Close Request, when he/she rectifies the fault it.Note: Reason code need to be configure in tool by the administrator
Pending work flow
Pending status is optional in between accepted and close request.The task can be move to pending after Accepted or after Onsite. SMS format is WO P[key][Pending reason code] . e.g. WO PBCDE004 or it can also be WO P[key](in this case default reason will capture).The task can be released from pending by sending the same SMS without reason code. e.g. WO PBCDEHigh priority Tickets can be restricted from pending.
WORKFLOWWO Message with key [XYXY]WO AXYXYWO PXYXY WO CXYXY 2 001 WO PXYXY001WO OXYXY
WO DISPATCHWO ACCEPTEDWO PENDINGWO BACK TO ACCEPTEDWO ONSITEWO CLOSE REQUEST
WO MESSAGE RECEIVEDACCEPT WO MESSAGEPENDING WO MESSAGE[if required] NOTE:001 is the reason code for pendingRELEASE PENDIND WO MESSAGEONSITE WO MESSAGESCLOSE REQUEST MESSAGES[WO C(key) (no. of site visit) (RCA reason code)
NOTE: For both suspension and Release the key word is PMOVING TO PENDING STATUSRELEASE FROM PENDING STATUS
The following message will be received if the engineers tried pending for restricted priorities
THANK YOU
*
Top Related