SEJ441- Engineering Project A
Research Proposal
Project Title: Modelling the performance of a sand filter that is used to
treat a polluted pond
Civil Engineering Student Name: Busiku Silenga
Student ID: 210037589
Supervisor Name: Associate Professor Jega Jegatheesan
Submission Date: 13th April 2014
Contents Chapter 1.Introduction ................................................................................................................................................... 3
1.1 Introduction ...................................................................................................................................................... 3
1.2 Background ..................................................................................................................................................... 3
Chapter 2.Project Definition .......................................................................................................................................... 4
2.1 Key objective/ Issue(s) to be investigated .................................................................................................. 4
2.2 Project benefits ............................................................................................................................................... 4
2.2.1 Financial benefits ........................................................................................................................................ 4
2.2.2 Environmental benefits .............................................................................................................................. 5
2.2.3 Health benefits ............................................................................................................................................ 5
2.2.4 Technological benefits ............................................................................................................................... 5
2.3 Scope ............................................................................................................................................................... 5
2.4 Methodology .................................................................................................................................................... 6
2.4.1 Evaluation of different coagulants .................................................................................................................. 6
2.4.2 Enhancement of sand filter ............................................................................................................................. 6
2.4.3 Design of backwash system ........................................................................................................................... 7
2.4.4 AQUASIM Software ................................................................................................................................... 7
2.5 Apparatus .............................................................................................................................................................. 7
2.6 Project Deliverable .............................................................................................................................................. 7
Chapter 3.Literature Review/ Research ...................................................................................................................... 8
3.1 Rational and significance of the study (with references) ............................................................................... 8
3.2 Brief research strategies ................................................................................................................................... 11
Chapter 4.Tentative Brief Timeline ............................................................................................................................ 13
Chapter 6.Conclusion/ Reflective Paper ................................................................................................................... 17
6.1 Conclusion .......................................................................................................................................................... 17
6.2 Reflective paper/Document .............................................................................................................................. 17
7.0 References ........................................................................................................................................................ 18
Chapter 1.Introduction
1.1 Introduction
Water is the most essential material for human survival, after air (Ahuja, 1986). The uses we make of
water in lakes, rivers, ponds, and streams are greatly influenced by the quality of the water found in them.
Different activities, be it fishing, swimming, boating and waste disposal have very different requirements for
water quality. The introduction of pollutants from human activity has seriously degraded water quality in
many parts of the world, often turning pristine water bodies into foul open sewers with few life forms and
even fewer beneficial uses (Mckenzie L Davis and David A Cornwell, 2008). Water pollutants are
categorized as point source or nonpoint source, the former being identified as all dry weather pollutants that
enter watercourses through pipes or channels. Storm drainage, even though the water may enter
watercourses by way of channels or pipes is considered nonpoint pollution. The total waste load in a water
body is represented by the sum of all point and non-point pollutant sources (Shubinski and Tierney, 1973).
Point source pollution comes mainly from industrial facilities and municipal wastewater treatment plants
while nonpoint pollution sources include agricultural runoff, construction sites etc. (Ruth F Weiner, 2003).
Water pollution can be defined as any change in the dynamic equilibrium in aquatic ecosystem(s) that
disturbs the normal function and properties of pure water .The symptoms of water pollution of any water
body include bad taste of drinking water, offensive smells from water bodies, unchecked growth of aquatic
weeds (eutrophication).The quality of water is vital for mankind as it is directly linked with human welfare
(Anil K and Arnab Kumar, 2009). Water pollution is caused by domestic sewage (84 %) and industrial
sewage (16%), though the latter has less load on water bodies, it contains toxic matter which is more
hazardous (Anil K and Arnab Kumar, 2009). The large number of water pollutants is broadly classified
under the categories of; Organic pollutants, Inorganic pollutants, Sediments, Radioactive materials and
thermal pollutants. (Ruth F Weiner, 2003).
1.2 Background
Most ponds are unfenced and multipurpose; consequently making most pond water moderately or
seriously polluted, and thus cannot be considered for use without treatment. Ponds are generally preferred
because of their proximity to the point of use, lower turbidity and reliability. These sources may be
developed by using a Sand filter. The Sand filter technology relies on a straining, settling and adsorption to
purify water (Huisman and Wood, 1974). Sand filters because of their simplicity, efficiency and economy
are appropriate means of water treatment (Nigel Graham and Robin Collins, 1996). When source water
quality is beyond the range recommended for Sand filters used alone, pretreatment can extend the
capability of this process. Higher turbidity, color, NOM and synthetic organic chemicals can be removed
when pretreatment or post treatment processes are added (Gary S Logsdon,2008).Since filters are not
generally designed to remove dissolved compounds, which can constitute roughly half of certain pollutants,
enhancement of the sand filter can greatly enhance the removal of these compounds.
Chapter 2.Project Definition
2.1 Key objective/ Issue(s) to be investigated
The aim of this project is to develop a polluted pond filtering and cleaning system and use AQUASIM
software to evaluate the water quality before and after treatment using chlorine decay studies. This will
include;
Evaluating different types of coagulants,
Determining which treatment process is required based on the initial parameters of the polluted
water samples (direct filtration or coagulation, flocculation and then filtration)
Enhancement of the sand filter using different filter media configurations
Design of a backwash system
Further improvement using a ceramic membrane for further treatment.
Comparison of different treatment processes and filter media configurations to evaluate which is the
most effective and establishing a relationship between experimental and predicted data.
Use AQUASIM software to evaluate the water quality before and after treatment using chlorine
decay studies. Reduction in chlorine demand will help to evaluate the performance of treatment in
removing organic compounds and others that consume chlorine.
2.2 Project benefits
The immense impact of water pollution on peoples daily lives has increased the importance of conducting
research that will enable assessment of environmental damage in economic terms. Water (pond) pollution
control and treatment is an important topic in Environmental engineering. Gaining an understanding of it
and expanding on that understanding will have huge financial, environmental and health benefits. Although
the project is based on pollution in ponds which are relatively small, generally the same principles can be
applied to treatment of larger water bodies.
2.2.1 Financial benefits
Water pollution can be damaging to entire economies as it is expensive to treat and prevent contamination.
Many industries require the use of fresh water, some are entirely based on it and as more water becomes
polluted the price to purify this water begins to grow as do the costs involved in those industries. Treatment
methods such as sand filters and chemical additives help to prevent pollution of nearby water bodies.
These are very simple techniques that are easy to implement, although they cost money to maintain, it is
much cheaper preventing pollution than cleaning up water pollution that has already significantly occurred.
This project will help us explore ways in which we can make treatment methods like sand filters more cost,
performance and environmentally effective.
2.2.2 Environmental benefits Water pollution has been shown to have drastically negative impacts on wild animals and the environment
as a whole. For example it is possible for the pollutants to raise the temperature of the water enough to
force fish out in search of cooler water, this in itself can create an ecological dead zone. Pollutants can also
significantly increase the rate of algal blooms. These blooms create massive fish die-offs as the oxygen in
the water gets depleted (Jared Skye, 2014). If the right treatment methods are implemented such cases
can be avoided, this project will help explore more environmental, performance and cost effective ways of
doing that.
2.2.3 Health benefits
Water pollution can pose health dangers to humans who come into contact with it, either directly or
indirectly. Risks include contaminated drinking water, high mercury level risks and other health effects of
toxic runoff. Developing cost effective ways to treat water would result in huge health benefits especially in
developing countries, where people spend more money on treatment of sicknesses resulting from polluted
waters instead of treating the polluted water which would result in solid financial and health benefits. This
project will help us gain an elementary theoretical and practical understanding of how water treatment
methods, specifically sand filters can be designed and enhanced in order to achieve high water quality in
areas affected by pollution.
2.2.4 Technological benefits
This project will help us to expand and improve on the already existing water treatment methods
specifically, sand filter technology. Our design will explore ways in which to make treatment of polluted
water using sand filters more effective, in terms of maintenance cost, purchase cost, accessibility, ease of
use and performance.
2.3 Scope
The scope of the project will include;
A literature review, to investigate and evaluate the methods and ways in which water pollution is
treated by enhanced sand filtration systems
Experimental methods in which polluted samples will be treated in order to evaluate which process
and/or configuration is the most effective.
An oral presentation in which the outcomes of the project will be presented
A written report that will encompass all the findings of the report and present them in report format
2.4 Methodology
This project will include both theoretical study and practical experiments. The theoretical study will mainly
discuss the theories behind water pollution, its effects and information on different types of pollutants and
their behavior in water bodies(transport phenomena, chemical reactions etc),its treatment, including
treatment using different filter media configurations. This part of the project will be covered by using
academic and scientific resources such as, academic journals and papers from academic databases, as
well as scientific data sheets.
The practical part of the assignment will be done in the Civil Engineering laboratory at Deakin University
Waurn Ponds Campus. It will basically be implementing the theories and designs discussed in the
theoretical part.
2.4.1 Evaluation of different coagulants
The polluted samples will be collected from the different ponds located at the Deakin University Waurn
Ponds Campus, their initial parameters will be measured (pH, turbidity, etc). Jar testing will then be used to
evaluate the different coagulants (Alum, Ferric chloride, etc) and coagulant doses, to see which is more
effective in terms of cost and performance. These samples will be chlorinated at every stage in the
treatment process. Jar testing will be done in three stages which will take approximately 1 hour. 1 minute
for rapid mixing at 201 RPM, 30 minutes for slow mixing at 20 RPM and 30 minutes for settling, parameters
of the effluent will then be measured.
Figure 1: Jar testing (Deakin University 2014)
2.4.2 Enhancement of sand filter
Enhancement of sand filter will be conducted in Deakin University Laboratory and will be done by trying
different configurations of the filter media (adding different material) and evaluating which configuration is
the most effective after having measured the parameters of the effluent.
2.4.3 Design of backwash system
Design of backwash system to be conducted in Deakin University Laboratory, it will be used to remove
solids that accumulate in the filter media and is generally performed by backwashing clean water in the
opposite direction of flow. This will be accomplished periodically to control head loss through the filtration
system
2.4.4 AQUASIM Software
AQUASIM software will be used to evaluate the water quality before and after treatment using chlorine
decay studies. Reduction in chlorine demand will help to evaluate the performance of treatment in removing
organic compounds and others that consume chlorine.
2.5 Apparatus
In order to perform our experiments and tests, we will need the following apparatus;
pH meter
Stirring machine(for Jar testing)
Volumetric flasks
Watch or clock
Turbidity meter
Sand filter
Different materials to enhance sand filter media
2.6 Project Deliverable
The findings of this project will be presented in a formal verbal presentation and a formal written report. It is
expected that the project will provide valuable information and a clear understanding of pollution in ponds
(types of pollutants and their effects and how they behave in water bodies) and how sand filters can be
enhanced in order to make the treatment more effective. It is also expected that a clearer understanding on
backwash systems and how they can be designed will be gained. Also the project will provide an
understanding of different coagulants and their effectiveness in treating polluted water. Overall the project
will produce a pond cleaning and filtering system design that will be used to treat the provided, polluted
water samples and is both cost and environmentally effective, this design will then be evaluated by
AQUASIM software in order observe the water quality before and after treatment using chlorine decay
studies.
Chapter 3.Literature Review/ Research
3.1 Rational and significance of the study (with references)
Pond treatment technology is used in tens of thousands of applications serving many millions of people
across the globe because it is efficient and effective. While pond treatment technology offers relative
simplicity in its application, it incorporates a host of complex and diverse mechanisms that work to treat and
cleanse polluted waters before their return to our environment .While performance and cost are obviously
key bottom line requirements, the importance of selecting a technology that is appropriate to the needs and
constraints of the local situation where it is installed is essential to achieving long term reliability and
success (Andy Shilton, 2005).
Table 1: Considerations concerning the risk levels in surface water sources (Joseph Cotruvo, 1998)
Filtration is one of the most important elements in traditional water treatment systems. The effectiveness
of filtration systems is determined by their ability to remove microorganisms, turbidity and color (Color is
imparted to water supplies by organic material and can be removed by coagulation) (US EPA, 1999). Sand
filters have proven effective in removing several common pollutants from polluted water. Sand filters
generally control storm water quality (storm water runoff is a major contributor of pollutants in water
bodies), providing very limited flow rate control. Sand filters take up very little space and can be used on
highly developed sites and sites with steep slopes. Sand filters are able to achieve high removal
efficiencies for sediment, biochemical oxygen demand, and fecal coliform bacteria. Total metal removal
however, is moderate and nutrient removal is often low (EPA, 1999).
A sand filter system typically consists of three chambers: and inlet chamber that allows sedimentation and
removal of gross pollutants, a sand filter chamber and a high flow bypass chamber. The shape of a sand
filter can be varied to suit constraints and maintenance access, provided each of the chambers is
adequately sized. Filter retention time = filter size/pump rate (EPA, 1999). Sand filters have no vegetation
to break up the filter surface; therefore maintenance is critical to ensuring continued performance,
particularly in preserving the hydraulic conductivity of the filtration media (McGarry and Eddie 2011).
Regular maintenance involves removing the surface layer of fine sediments that can tend to clog the
filtration media. In order to significantly increase ease of maintenance for a sand filter, direct physical
access to the whole surface of the sand filter chamber will be required to remove fine sediments from the
surface layer of the filter media as they accumulate forming a crust. Also the sedimentation chamber needs
to be drained for maintenance purposes. Having freely drained material significantly reduces the removal
and disposal maintenance costs. Also provision should be made for flushing of any sediment build up that
occurs in the pipes. (McGarry and Eddie 2011).
Table 2: Typical pollutant removal efficiency of sand filters (Galli, 1990)
Table 3: Comparative properties of different filtering media (Galli,1990)
The performance of a filtration technology is greatly impacted by the processes that precede it. Chemical feed, rapid mix, flocculation and sedimentation may need upgrading to improve overall system performance or accommodate system expansions. The three basic aspects of chemical feed systems are chemical type, dosage management and the method of chemical application (US EPA, 1999). During coagulation, chemicals that assist in the removal of suspended solids are added to the untreated water. Coagulants, rapidly add electrochemical charges that attract the small particles in water to clump together as a floc. The initial charge neutralization process allows the formed floc to agglomerate but remain suspended. Coagulation is usually a high energy, rapid mix unit process. Detention time of the coagulation is about 2-3 seconds (McGarry and Eddie 2011). During flocculation process, the precipitates combine into larger particles Flocs. The large amorphous aluminium and iron (III) hydroxides adsorb and enmesh particles in suspension. By slower mixing, turbulence causes the flocculated water to from larger floc particles and
increase in mass. These flocs are then easier to remove via the subsequent processes of sedimentation and filtration. Large paddles as mixing devices enhance the formation of the floc. Detention time of flocculation ranges from 10-30 minutes (McGarry and Eddie 2011).. The flocculated water is applied to large volume tanks where the flow speed slows down (the flow is almost devoid of turbulence) and the dense floc settles to the bottom. The settled floc is then removed after it resides at this point to remove all settleable particles from coagulation and is then treated as waste product. Detention time =tank volume/ incoming water flow rate, i.e detention time is inversely proportional to the incoming flow rate- as the flow rate increases, the detention time decreases (McGarry and Eddie 2011).
Coagulant pH Range Dosage mg/L
Ferric sulphate (FeSO47H2O) 5.5-11 8.5-51
Ferric Sulphate (Fe2(SO4)3 5.5-11 8.5-51
Ferric Chloride (FeCl3) 5.5-11 8.5-51
Sodium Aluminate (Na2Al2O4) 5.5-8 3.4-34
Aluminium Sulphate(Alum)- Al2 (SO4)3, 18H2
5.5-8 5-85
Table 4: Common coagulants and dosage for best floc formation
Research on enhancing sand filters and designing them to remove dissolved phosphorus as well are
being researched (Erickson et al.2012). Research on other enhancements to remove dissolved metals is
also under way (Andrew J Erickson, 2013). Improving filtration systems can increase plant capacity and
improve effluent quality. This is usually achieved by changing the configuration of the filter media, for
example changing the filter media to dual or mixed media or replacing the top layer of sand with anthracite
coal. Filtration aid application is also another way in which filtration systems can be improved. These aids
prevent premature turbidity breakthroughs by controlling floc penetration into the filter. Also addition of
polymers to the backwash water can reduce the initial turbidity peaks during filter ripening following
backwash and extend filter operation before breakthrough occurs (US EPA, 1999).Although filters are not
generally designed to remove dissolved compounds, dissolved phosphorus removal can be significantly
enhanced if the sand is amended with iron, calcium, aluminum or magnesium (Arias te al.2001). Another
modification that may improve sand filter design and performance that is being tested is the addition of a
peat layer in the filtration chamber. The addition of peat to the sand filter may increase microbial growth
within the sand filter and improve metals and nutrient removal rates (Arias te al.2001)..
3.2 Brief research strategies
1. Understanding project objectives
2. Investigating key issues and benefits of the project
3. Develop a solid background about the project using resources provided by the Deakin university
website, google scholar, books and documents provided by the supervisor
4. Organizing and scheduling the project (e.g diary, logbook, outline and end date) using Microsoft
project software (gannt chart)
5. Having a weekly meeting with the supervisor in order to update and get feedback
6. Reading through recent journals and research papers in order to get more information about the
latest progress on modelling sand filters to clean polluted water bodies.
7. Improving on gained information by doing more advanced research
8. Writing down a brief literature review
9. Developing and expanding literature review
10. Identifying suitable materials for the experimental aspect of the project (e.g coagulants, materials for
sand filter enhancement)
11. Ensuring a solid theoretical background on the experiments to be performed
12. Communicating with Leanne Farago to be under her supervision in the water laboratory
13. Having a session in order to observe and practice on equipment being used in the experiment
14. Knowing the experimental procedures and being aware of any safety issues that might arise during
the experiments and how to react to them
15. Measuring initial sample parameters (turbidity, pHetc)
16. Selecting appropriate method for experiments and determine which one is the most effective
17. Experimentally evaluate different types of coagulants and their effect on polluted water samples
18. Experimentally enhance sand filter using different material configurations
19. Design a backwash system
20. Determining which configuration is the most effective and basing our model design on these results
21. Collecting all experimental data and analyzing it
22. AQUASIM software will be used to evaluate the water quality before and after treatment using
chlorine decay studies. Reduction in chlorine demand will help to evaluate the performance of
treatment in removing organic compounds and others that consume chlorine.
23. Matching all theoretical and predicted data with our final results and analyzing any potential
mismatch
24. Doing the final analysis
25. Writing the final report
Strategies Chart:
Project Objective
ExperimentResearch
Books and journals Deakin libraryWebsite
Previous Research papers
Theoretical Analysis
Enhance sand filter
Evaluate different coagulants
Design backwash system
Practical analysis
Comparison of theoretical and practical results
Final Report
Chapter 4.Tentative Brief Timeline
The project timeline basically presents the entire project tasks with the time frame for each task, starting
from understanding the target of the project and finishing with the final project thesis conduction.
Table showing a brief timeline is shown below:
Tasks Sub Tasks Description Duration
Understanding the
target of the
project
1 Finding references Searching for the related
references to the research topic
Week 2
2 Reading task Reading through references and
narrowing down the research
topic
Week 2
3 Having first meeting
with supervisor
Identifying key questions to be
investigated and getting a clear
understanding of the project
objectives
Week 2
Understanding the
theoretical and
experimental
expectations and
outcomes of the
project
1 Contacting Technical
officer Mrs Leanne
Farago
1. Safety induction
2. Getting a clearer
understanding of what is
expected from lab work,
gaining an understanding
of how the equipment
works.
3. Organizing materials
needed for the
experiment
Week 2
2 Preparing project
specification
1. Developing a research
strategy
2. Defining the project
outputs
3. Scheduling a timeline for
project thesis
Week 3
Writing project
proposal
1 Having second
meeting with
supervisor
Narrowing down project
objectives and developing
methodologies that will help
strategically meet project aim
Week 3
2 Constructing project
proposal
1. Outlining the objective of
the project
2. Defining the benefits and
outputs of the project
Week4-5
3. Providing a literature
review including
Experiment
Conducting
1 Gathering experiment
results
Gathering results from previous
experiments and from our own
experiments to be used for data
analysis
Week 5-8
2 Having third meeting
with supervisor
Get feedback on project progress
and ideas on how to make it
better
Week 7
Oral Presentation
preparation
1 Powerpoint
presentation
Prepare a powerpoint
presentation to express the idea
of the project in its entirety
Week 7-9
2 Presentation of
outcomes
Explain and present the data we
have collected and analyzed
Week 7-9
3 Having fourth meeting
with supervisor
Get feedback on PowerPoint
presentation and discuss ways in
which to improve it.
4 Presentation of final
result
Present the final result, and
explain how we got to choose
this as the most effective
Week 7-9
Preparing a
research report
1 Collecting data from
research papers
1. Gathering information
about the performance of
sand filters and pollution
in ponds
2. Analyze the data to be
used in a case study
Week 9-11
2 Surveying Literature 1. Developing extended
literature review about the
performance of sand
filters and pollution in
ponds and expand
understanding using
recent studies.
Week 9-11
3 Having fifth meeting
with supervisor
Get feedback on research report
and discuss ways in which to
improve it.
Week 10
4 Writing Final research
report
Putting all the information gained
so far in report format
Week 9-11
Timeline of the project as illustrated by a Gannt chart is shown below:
Chapter 6.Conclusion/ Reflective Paper
6.1 Conclusion
In conclusion, the proposal outlines how polluted pond water can be treated using water treatment
methods specifically a sand filtration system and the parameters that should be considered in order to
ensure that the design is effective in terms of performance, accessibility, cost and maintenance. AQUASIM
software will also play a huge role in evaluating the water quality before and after treatment using chlorine
decay studies. Reduction in chlorine demand will help to evaluate the performance of treatment in removing
organic compounds and others that consume chlorine.
6.2 Reflective paper/Document
The main strength of this project lies in the practicality of it. The amount of experimentation and testing
that will be done on different coagulants and different filter media configurations will give a wide range of
results which will ease the criteria for selecting the final design. It will also give a practical understanding of
how the pretreatment and filtration stages of water treatment processes work, and help outline ways in
which they can be improved in order to be more effective. Another practical aspect of the project is the use
of AQUASIM software, which will reduce the cost and time of having to experimentally evaluate the water
quality before and after treatment. The project, thanks to the amount of research involved will enable
implementation of theoretical understanding in a practical way (design).
One of the weaknesses of the project is the fact that because pond pollution and filter enhancement is
not a topic that has been intensely researched in the past, there is limited access to vital information which
may not have been researched yet, but the project does have the advantage of being one more resource to
be used for future reference.
7.0 References
1. Weiner, Ruth F, 2003. Environmental engineering. 4th ed. Amsterdam; Boston: Butterworth-Heinemann.
2. Kumar, Arnab, 2009. Environmental engineering. 1st Ed. New Delhi: New Age International (P) Ltd., Publishers.
3. Ravenscoft, Peter, 2009. Arsenic Pollution: A Global Synthesis. 1st ed. United Kingdom: John Wiley & Sons Ltd
4. Liu, David H.F, 2000. Groundwater and Surface Water Pollution. 1st ed. USA: Lewis Publishers.
5. Shilton, Andy, 2005. Pond Treatment technology. 1st ed. United Kingdom: IWA Publishing.
6. Logsdon, Gary S, 2008. Pond Treatment technology. 1st ed. United States of America: American water works association.p.220
7. Erickson, Andrew J, 2013. Optimizing Storm water Treatment Practices: A Handbook of Assessment and maintenance. 1st ed. United States of America: Springer science and business media.
8. Graham, Nigel, 1996. Advances in Slow Sand and Alternative Biological Filtration. 1st ed. United states of America: Wiley Publishers.
9. Graham, Nigel, 1996. Advances in Slow Sand and Alternative Biological Filtration. 1st ed. United states of America: Wiley Publishers.
10. Cotruvo, Joseph A, 1999. Providing Safe Drinking Water in Small Systems: Technology, Operations, and economies. 1st ed. Washington D.C: Lewis Publishers.
11. Gimbel, Rolf, 2006. Recent Progress in Slow Sand and Alternative Biofiltration Processes. 1st ed. United Kingdom: IWA Publishing.
12. AECOM + McGarry and Eadie. April 2011. Water Sensitive Urban Design for the Coastal Dry Tropics (Townsville): Design Objectives for Stormwater Management. Prepared for Twonsville City Council.
13. Erickson, Andrew J, 2013. Optimizing Stormwater Treatment Practices: A Handbook of Assessment and Maintenance. 1st ed. New York: Springer Publishers.
14. US EPA.2002. Technologies for upgrading existing or designing new water drinking water. United States Environmental Protection Agency.
15. Effects of Water Pollution. 2014. Effects of Water Pollution. [ONLINE] Available at: http://greenliving.lovetoknow.com/Effects_of_Water_Pollution. [Accessed 13 April 2014] .
16. EPA. 2014. Stormwater technology fact sheet. http://water.epa.gov/scitech/wastetech/upload/2002_06_28_mtb_sandfltr.pdf. [Accessed 13 April 2014]
Chapter 1.Introduction1.1 Introduction1.2 Background
Chapter 2.Project Definition2.1 Key objective/ Issue(s) to be investigated2.2 Project benefits2.2.1 Financial benefits2.2.2 Environmental benefits2.2.3 Health benefits2.2.4 Technological benefits2.3 Scope2.4 Methodology2.4.1 Evaluation of different coagulants2.4.2 Enhancement of sand filter2.4.3 Design of backwash system2.4.4 AQUASIM Software2.5 Apparatus2.6 Project Deliverable
Chapter 3.Literature Review/ Research3.1 Rational and significance of the study (with references)3.2 Brief research strategies
Chapter 4.Tentative Brief TimelineChapter 6.Conclusion/ Reflective Paper6.1 Conclusion6.2 Reflective paper/Document7.0 References
Top Related