Rotary Lobe PumpApplication Data Sheet

CONTACT DETAILSCustomer: Date:

Contact: Complied By:

Position: Tel No:

Email: Fax No:

PUMPED MEDIA CHARACTERSISTICSPumped Media:

SG: Viscosity (cP):

OPERATING CONDITIONS/DUTY DETAILSFlow Rate: Sketch of system

Suction Pressure (NPSHa):if unknown, please sketchDischarge Pressure:if unknown, please sketchStatic Head:

Pipe Dia: Length:

Other Equipment:

Bends: Tees:

CIP/SIP: (Select Yes or No)

If yes, name of cleaning/sterilising fluids:

Duration of CIP/SIP:

PUMP CONSTRUCTION REQUIREMENTSNo. of pumps: Size of inlet/outlet ports:

(Select Size)Port orientation: Thead/flange standard:

(Select Horizontal or Vertical) (Select Standard)Pressure Relief Valve: (Select Yes or No) Electropolishing:

(Select None, 0.8 Ra or 0.5 Ra)Heating/Cooling Jackets and Saddles:

(Select None, Front Cover and/or Rotorcase)Other special requirements:

DRIVE REQUIREMENTS (FOR TEFV MOTOR ENCLOSURE ONLY)Drive type: Motor protection:

(Select as required) (Select IP55 or IP65)Thermistors: (Select Yes or No) Electrical supply:

(Select 400v/3/50, 460v/3/60 or Other)Baseplate material: If Other, advise:

(Select Stainless Steel or Mild Steel)Ball feet: (Select Yes or No) Shroud: (Select Yes or No)

Other special requirements:

Temperature (°C):

Max CIP/SIP Temperature (°C):