Rotary Lobe Pump Application Datasheet2
1
Rotary Lobe Pump Application Data Sheet CONTACT DETAILS Customer: Date: Contact: Complied By: Position: Tel No: Email: Fax No: PUMPED MEDIA CHARACTERSISTICS Pumped Media: SG: Viscosity (cP): OPERATING CONDITIONS/DUTY DETAILS Flow Rate: Sketch of system Suction Pressure (NPSHa): if unknown, please sketch Discharge Pressure: if unknown, please sketch Static Head: Pipe Dia: Length: Other Equipment: Bends: Tees: CIP/SIP: (Select Yes or No) If yes, name of cleaning/sterilising fluids: Duration of CIP/SIP: PUMP CONSTRUCTION REQUIREMENTS No. of pumps: Size of inlet/outlet ports: (Select Size) Port orientation: Thead/flange standard: (Select Horizontal or Vertical) (Select Standard) Pressure Relief Valve: (Select Yes or No) Electropolishing: (Select None, 0.8 Ra or 0.5 Ra) Heating/Cooling Jackets and Saddles: (Select None, Front Cover and/or Rotorcase) Other special requirements: DRIVE REQUIREMENTS (FOR TEFV MOTOR ENCLOSURE ONLY) Drive type: Motor protection: (Select as required) (Select IP55 or IP65) Thermistors: (Select Yes or No) Electrical supply: (Select 400v/3/50, 460v/3/60 or Other) Baseplate material If Other, advise: (Select Stainless Steel or Mild Steel) Ball feet: (Select Yes or No) Shroud: (Select Yes or No) Other special requirements: Temperature (°C): Max CIP/SIP Temperature (°C):
description
Data Sheet
Transcript of Rotary Lobe Pump Application Datasheet2
Rotary Lobe PumpApplication Data Sheet
CONTACT DETAILSCustomer: Date:
Contact: Complied By:
Position: Tel No:
Email: Fax No:
PUMPED MEDIA CHARACTERSISTICSPumped Media:
SG: Viscosity (cP):
OPERATING CONDITIONS/DUTY DETAILSFlow Rate: Sketch of system
Suction Pressure (NPSHa):if unknown, please sketchDischarge Pressure:if unknown, please sketchStatic Head:
Pipe Dia: Length:
Other Equipment:
Bends: Tees:
CIP/SIP: (Select Yes or No)
If yes, name of cleaning/sterilising fluids:
Duration of CIP/SIP:
PUMP CONSTRUCTION REQUIREMENTSNo. of pumps: Size of inlet/outlet ports:
(Select Size)Port orientation: Thead/flange standard:
(Select Horizontal or Vertical) (Select Standard)Pressure Relief Valve: (Select Yes or No) Electropolishing:
(Select None, 0.8 Ra or 0.5 Ra)Heating/Cooling Jackets and Saddles:
(Select None, Front Cover and/or Rotorcase)Other special requirements:
DRIVE REQUIREMENTS (FOR TEFV MOTOR ENCLOSURE ONLY)Drive type: Motor protection:
(Select as required) (Select IP55 or IP65)Thermistors: (Select Yes or No) Electrical supply:
(Select 400v/3/50, 460v/3/60 or Other)Baseplate material: If Other, advise:
(Select Stainless Steel or Mild Steel)Ball feet: (Select Yes or No) Shroud: (Select Yes or No)
Other special requirements:
Temperature (°C):
Max CIP/SIP Temperature (°C):
