1
JJC RM-E4 Infrared Remote Control Instruction
Thank you for purchasing JJC RM-E4 Infrared Remote Control.
For the best performance, please read this instruction carefully before use.
� To use RM-E4 Remote Control
1. For the first time use, please pull out the plastic separator (if your remote control has it) at the
battery holder.
2. Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.
3. Press the button and rotate main command dial until (delayed remote) or (quick response
remote) is displayed in the control panel.
4. Aim the transmitter on the remote control at the infrared receiver on the camera (usually within
+/- 20 degree of the lens axis, from the left to the right and from the top to the bottom) and
press the shutter-release button on the remote control (when using the remote outdoors, make
sure that the subject is not backlit and that the line of site between the transmitter and the
infrared receiver is not blocked by the lens or other obstacles).
5. How the camera focuses and shoots depends on the option selected for your camera's custom
setting. For further information, check your camera's manual.
Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the
front end of the remote control when operating.
2
� Identifying the buttons
T/W button is for change Pentax camera’s lens ZOOM. P
Part S button is for shutter.
(T/W function is not working on Pentax DSLR/SLR camere.)
N
Part S button for Nikon camera Shutter
S button for Canon DSLR/SLR camera instant shutter. C1
Part 2S button for 2seconds delay shutter.
S button for Canon PowerShot cameras shutter.
T side for telephoto
W side for wide-angel
Move Backword (replay mode)
Move forward (replay mode)
Toggle various onscreen data overlays
Thumbnail index / zoom out
C2
Part
Play magnification
controls zoom, image display, and toggle displays
� Specification
• 100% compatible with Pentax Remote E infrared remote controls.
• Works with all remote shutter release control modes (Quick-response, W/T Zoom).
• Easy-to-replace CR2025 lithium battery.
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
• Typical Battery Life: up to 3 years, 20,000 exposures.
3
� To Replace the Battery
1. The remote control is powered by a three-volt CR2032 lithium battery which is already
included in.
2. After sliding the latch in the direction shown to unlatch the battery holder, remove the
holder.
3. Remove the battery from the battery holder.
4. Insert a fresh battery with the face marked "+" on top.
5. Slide the battery holder into the remote until the latch clicks into place.
� Attention:
a. When the remote control is not in use over a long time, please remove the
battery from the remote control.
b. Do not leave the remote control in places subject to extremely high
temperatures.
Pentax Part compatible with Pentax Cameras ((((P part))))
Digital SLR K110D K100D K10D *ist DL
*ist DS *ist D *ist DS2 *ist DL2
Optio S S4 S4i S5i
S5n S6 S7 430
450 550 750z S50
S40 SV 330 A10
A20 A30
Film SLR *ist MZ6 MZ-L ZX-L
Pentax Part compatible with Samsung Cameras ((((P part))))
Digital SLR GX-1L GX-1S GX-10
Canon DSLR/SLR part compatible with Canon Cameras ((((C1 part))))
Digital SLR 400D 350D 300D Digital Rebel
Digital Rebel XT Digital Rebel XTi
Film SLR ELAN 10 30 33
50 55 100 300v
300x 3000v QD Rebel K2 Rebel T1 Date
Reble T2 Date Kiss III Kiss III L A10
APS SLR EOX IX
SureShot
(Prima
Super)
Z180U Z155 120
ELPH 370Z Z3
4
Canon DC part compatible with Canon Cameras ((((C2 part))))
Power Shot Pro 1 G6 G5 G3
G2 G1 S1 IS S70*
S60* Pro 90 IS
*Only work with shutter function.
Nikon part compatible with Nikon Cameras ((((N part))))
Digital SLR D80 D70s D70 D50
D40 D40x
Film SLR F65 F75 N65 N75
Coolpix 8800 8400
LiteTouch 150ED 140ED 130ED 110S
100W
Nuvis Nuvis S
Copyright of JJC Technology Company
Top Related