Download - Prospex® TubeLED Mini - lucent-lighting.com · * Separate die cast plaster in kit for plaster ceilings. ** Tested from ceiling underside. To specify IP44;add '-IP' to end of code.

LengthDiameterWeightMaterialsFixing Ingress protection

144mmØ60mm1.0kgAluminium/SteelTrim/Trimless/Surface/Track Adaptor IP20

LED typeDriver currentForward voltageLED wattsEfficacyBeam angle

COB: Cree 350mA (integral driver)36V 17W 46lm/cctw (depending on colour and beam angle) 12°/24°/36°

Colour optionsCRI

2700K/3000K/4000K ≥90

744lm (depending on colour and beam angle)Delivered LumensTemperature range -20°C to 40°C (COB)

Phase/1-10V (TBC)180°355°

Dimming option*TiltRotation

Electrical characteristics

ww

w.lucent-lighting.com

Job/Project Name Area/Location Fitting Ref Quantity

ChinaEurope Russia

Issue Date: March 2016

WhiteBlackSilver

WHBKSV

122436

2730

12°24°36°LED Colour90CRI 2700K90CRI 3000K90CRI 4000K

7100‐LED ‐930 ‐12 -SP

Finish

Phase1-10V

Beam Angle

Non-Dim SPA

TubeLED Mini Order Code Dimming Option

‐S -3CT

FixingTrim Mono Point Trimless Mono Point Surface Mono Point3 Circuit Track Adaptor 1 Circuit Track Adaptor

RMP-0001TMP-0001SMP-00013CT

-WH

40

1CT

144

50

Ø60

CRI90CRI 9

Provisional (Subject to change)

Prospex® TubeLED Mini7100-LED-SPTrack mounted miniature tubular LED spotlight fixture with integral driver.

The TubeLED Mini can be dimmed (Phase or 1 -10V) when specified with the appropriate track type and adaptor. Accepts up to 2 accessories.

neil

Text Box

*Dimming. Whilst Lucent can offer the majority of its luminaires with various dimming options, it remains the responsibility of the specifier/installer to check and ensure compatibility of any control equipment used. Additional cabling may be required depending on the dimming protocol specified.

neil

Text Box

It is the policy of Lucent Lighting to continually review and improve its products and therefore reserve the right to change any details of product or withdraw specifications without prior notice. Luminaires designed to comply with EN60598 and all other relevant Standards. This Specification Sheet supersedes all previous versions All intellectual property rights pertaining to the product described above and to this document are owned by or licensed to Lucent Lighting UK Ltd. We reserve our right to take whatever action is necessary to protect those intellectual property rights. Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE

neil

Text Box

Contact Lucent Lighting: e: [email protected] t: +44 (0)20 8442 0880

ww

w.lu

cen

t-ligh

ting

.com

* Separate die cast plaster in kit for plaster ceilings.

** Tested from ceiling underside. To specify IP44; add '-IP' to end of code.

*** Dimming options depend on driver (to be separately ordered/specified).

Some control methods may require additional cabling

Lucent reserve the right to change any details, dimensions colours etc without prior notice. Any reproduction of

Lucent products is strictly forbidden .. perpetrators will be pursued! Information correct as of May 2012.


ChinaEurope Russia

TubeLED mini Fixing Types:

1 or 3 CircuitTrack Adaptor 1CT / 3CT

Surface Mono PointSMP-0001

Recessed Trimless Mono PointTMP-0001

1. Install track brackets 4. Insert TubeLED mini into trackand push lever to secure in place

3. Make eletrical connection2. Secure track to brackets

Recessed Mono PointRMP-0001

Installation Instructions:For 1 or 3 CircuitTrack Adaptor

MAINS POWER TO BE SWITCHED OFF! DURING INSTALLATION.

1. Create Hole (C): Ø30mm 4. Make electrical connection3. Feed cable through bracket andsecure bracket to ceiling

2. Feed cable through

For Surface Mono Point

5. Place ceiling canopy over bracketand secure with screws provided

C

neil

Text Box


neil

Text Box


ww

w.lucent-lighting.com


ChinaEurope Russia

2. Finish ceiling face1. Plasterboard installationCutout (C): 57mm

For Recessed Mono Point

3. Paint and allow to dry fully

6. Insert TubeLED mini5. Make electrical connection

4. Trim kit installtion

C

For Recessed Trimless Mono Point

1. Plasterboard installation Cutout (C): 57mm

4. Paint and allow to dry fully2. Trimless kit installtion 3. Plaster and allow to dry fully

C

6. Insert TubeLED mini5. Make electrical connection

neil

Text Box


neil

Text Box
