Prospex® TubeLED Mini - lucent-lighting.com · * Separate die cast plaster in kit for plaster...
Transcript of Prospex® TubeLED Mini - lucent-lighting.com · * Separate die cast plaster in kit for plaster...
LengthDiameterWeightMaterialsFixing Ingress protection
144mmØ60mm1.0kgAluminium/SteelTrim/Trimless/Surface/Track Adaptor IP20
LED typeDriver currentForward voltageLED wattsEfficacyBeam angle
COB: Cree 350mA (integral driver)36V 17W 46lm/cctw (depending on colour and beam angle) 12°/24°/36°
Colour optionsCRI
2700K/3000K/4000K ≥90
744lm (depending on colour and beam angle)Delivered LumensTemperature range -20°C to 40°C (COB)
Phase/1-10V (TBC)180°355°
Dimming option*TiltRotation
Electrical characteristics
ww
w.lucent-lighting.com
Job/Project Name Area/Location Fitting Ref Quantity
ChinaEurope Russia
Issue Date: March 2016
WhiteBlackSilver
WHBKSV
122436
2730
12°24°36°LED Colour90CRI 2700K90CRI 3000K90CRI 4000K
7100‐LED ‐930 ‐12 -SP
Finish
Phase1-10V
Beam Angle
Non-Dim SPA
TubeLED Mini Order Code Dimming Option
‐S -3CT
FixingTrim Mono Point Trimless Mono Point Surface Mono Point3 Circuit Track Adaptor 1 Circuit Track Adaptor
RMP-0001TMP-0001SMP-00013CT
-WH
40
1CT
144
50
Ø60
CRI90CRI 9
Provisional (Subject to change)
Prospex® TubeLED Mini7100-LED-SPTrack mounted miniature tubular LED spotlight fixture with integral driver.
The TubeLED Mini can be dimmed (Phase or 1 -10V) when specified with the appropriate track type and adaptor. Accepts up to 2 accessories.
ww
w.lu
cen
t-ligh
ting
.com
* Separate die cast plaster in kit for plaster ceilings.
** Tested from ceiling underside. To specify IP44; add '-IP' to end of code.
*** Dimming options depend on driver (to be separately ordered/specified).
Some control methods may require additional cabling
Lucent reserve the right to change any details, dimensions colours etc without prior notice. Any reproduction of
Lucent products is strictly forbidden .. perpetrators will be pursued! Information correct as of May 2012.
Job/Project Name Area/Location Fitting Ref Quantity
ChinaEurope Russia
TubeLED mini Fixing Types:
1 or 3 CircuitTrack Adaptor 1CT / 3CT
Surface Mono PointSMP-0001
Recessed Trimless Mono PointTMP-0001
1. Install track brackets 4. Insert TubeLED mini into trackand push lever to secure in place
3. Make eletrical connection2. Secure track to brackets
Recessed Mono PointRMP-0001
Installation Instructions:For 1 or 3 CircuitTrack Adaptor
MAINS POWER TO BE SWITCHED OFF! DURING INSTALLATION.
1. Create Hole (C): Ø30mm 4. Make electrical connection3. Feed cable through bracket andsecure bracket to ceiling
2. Feed cable through
For Surface Mono Point
5. Place ceiling canopy over bracketand secure with screws provided
C
ww
w.lucent-lighting.com
Job/Project Name Area/Location Fitting Ref Quantity
ChinaEurope Russia
2. Finish ceiling face1. Plasterboard installationCutout (C): 57mm
For Recessed Mono Point
3. Paint and allow to dry fully
6. Insert TubeLED mini5. Make electrical connection
4. Trim kit installtion
C
For Recessed Trimless Mono Point
1. Plasterboard installation Cutout (C): 57mm
4. Paint and allow to dry fully2. Trimless kit installtion 3. Plaster and allow to dry fully
C
6. Insert TubeLED mini5. Make electrical connection