Filtration SystemsProductsProcess Filtration Division
Filtration andSeparation Division242 Neck RoadP.O. Box 8223Haverhill, MA 01835-0723Phone: (800) 343-4048Fax: (978) 858-0625
Hydraulic Filter DivisionNorth America16810 Fulton County Road #2Metamora, OH 43540Phone: (419) 644-4311Fax: (419) 644-6205
Process Filtration Division6640 Intech BoulevardIndianapolis, IN 46278Toll Free: (888) 238-5356Phone: (317) 275-8300Fax: (317) 275-8410
Racor Division3400 Finch RoadP.O. Box 3208Modesto, CA 95353Phone: (800) 344-3286Phone: ((209) 521-7860Fax: (209) 529-3278
Racor DivisionHydrocarbon ProductsRoute #3 Box 9Henryetta, OK 74437Phone: (918) 652-4481Fax: (918) 652-8882
Hydraulic Filter DivisionEuropeChurwell ValeShaw Cross Business ParkDewsbury, England WF 12 7RDPhone: (44) 192 448 7000Fax: (44) 192 448 7001
Hydraulic Filter DivisionEuropeUCC ProductsP.O. Box 3Thetford, NorfolkIP24 3RT EnglandPh: (44) 1842-754251Fax: (44) 1842-753702
Finn Filter DivisionFin-31700Urjala As., FinlandPhone: (358) 3 54 100Fax: (358) 3 54 10100
Parker Hannifin Ind. e Com.Ltda. Filter DivisionVia Anhanguera, Km.25,305276-000 - Sao Paulo SP, BrazilPhone: (55) 11-3917-1222Fax: (55) 11-3917-1610
Parker Hannifin Korea Limited902 Dae Heung Bldg.648-23 Yeoksam-dongKangnam-ku, Seoul,Korea 135-080Tel: 82 2 561 0410Fax: 82 2 556 8187
Filtration Group TechnicalSales & Service Locations
Parker Hannifin CorporationProcess Filtration Division6640 Intech BoulevardIndianapolis, Indiana 46278Toll Free 1-888-C-FULFLO (238-5356)Telephone (317) 275-8300Fax (317) 275-8410http://www.parker.com
Parker WorldwideSales OfficesContact Parkers worldwide Serviceand distribution network by calling:
Argentina - +54 (1) 752 4129Australia - +61 (2) 634 7777Austria - +43 (2622) 23501 5Belgium - +32 (2) 762 1800Brazil - +55 (11) 847 1222Canada - 1-800-272-7537China - +86 (21) 6445 9339Chile - +(562) 623-1216Czech Republic - +42 613 41701Denmark - +45 (43) 541133Finland - +358 (3) 54 100France - +33 (4) 50 258025Germany - +49 (3727) 90991Hong Kong - +852 2428 8008Hungary - +36 (1) 25 22 539India - +91 (22) 577 1671Italy - +39 (2) 451921Japan - +81 (45) 861 3811Korea - +82 (2) 561 0414Mexico - 1-800-272-7537Netherlands - +31 (541) 585000New Zealand - +64 (9) 573 1523Norway - +(47) 64 86 77 60Poland - +48 (22) 8634942Singapore - +65 261 5233South Africa - +27 (11) 3927280Spain - +34 (1) 6757300Sweeden - +46 (8) 760 2960Taiwan - +886 (2) 8787 3780United Arab Emirates - =971 (2) 788587United Kingdom - +44 1442 238100United States of America - 1-800-272-7537Venezuela - +58 (2) 238 5422
n~
Lenntech [email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
The Parker HannifinFiltration Group Assures:
Consistent qualityTechnical innovationPremier customer service
Parkers technical resources provide theright filtration technologies that comformto your requirements. Thats why thous-ands of manufacturers and equipmentusers around the world rely on Parker Fil-tration products and people.
Worldwide Salesand Service
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBEDHEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/orsystem options for further investigation by users having technical expertise. It is important that you analyze all aspects of your applicationand review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions andapplications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the finalselection for the products and systems and assuring that all performance, safety and warning requirements of the application are met.
Parker operates sales and service cen-ters in major industrial areas worldwide.Call 1-800-C-PARKER for more informa-tion and for a synopsis of our FiltrationTechnology Textbook.
Hydraulic, Lubrication& Coolant FiltrationHigh-performance filtrationsystems for production ma-chinery in industrial, mobileand military/marine.
Compressed Air &Gas FiltrationComplete line of compressedair/gas filtration products;coalescing, particulate andadsorption filters in many ap-plications in many industries.
Process & ChemicalFluid FiltrationLiquid filtration systems forbeverage, chemical and foodprocessing; cosmetic, paint,water treatment; photo-pro-cessing; and micro-chip fab-rication.
Fuel Conditioning& FiltrationParker air, fuel and oil filtra-tion systems provide qualityprotection for engines oper-ating in any environment,anywhere in the world.
Legal NotificationsWARNING
Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorizeddistributors. This offer and its acceptance are governed by the provisions stated in the Offer of Sale.
Copyright 1997, Parker Hannifin Corporation, All Rights Reserved
About Parker Hannifin CorporationParker Hannifin is a leading global motion-control company dedicated to delivering pre-mier customer service. A Fortune 200Corporation, we are listed on the New YorkStock Exchange with PH as our symbol. Ourcomponents and systems comprise over1,000 product lines that control motion in awide spectrum of essential uses in some1,200 industrial and aerospace markets. OurCompany has the largest distribution net-work in its field, with over 6,000 distributorsserving more than 300,000 customers world-wide.
Parkers CharterTo be a leading worldwide manufacturer ofcomponents and systems for the builders andusers of durable goods. We will achieve prof-itable growth through premier customer ser-vice.
Parker Hannifin Corporation
Aerospace Group is a leaderin the developement, design,manufacture and servicing of hy-draulic and fuel control systemsand components for aerospaceand related high technology mar-kets
Climate and IndustrialControl Group is a leadingsupplier of flow control and fluidhandling components, gerotors,and of systems support to world-wide refrigeration, air condition-ing and automotive customers.
Filtration Group is a leadingworldwide manufacturer and mar-keter of quality filtration and clarifi-cation products.
Automation Group designs,produces, and markets the fullspectrum of components and sys-tems to provide force, motion & con-trol for industrial, mobile, marineand energy related machinery andequiment.
Fluid Connectors Groupdesigns, manufactures and mar-kets hose, fittings, flexible connec-tors, instrumentation products andassociated components used influid systems
Seal Group designs, manufac-tures and distributes industrial andcommercial sealing devices andrelated products by providing su-perior quality and emphasizing to-tal customer satisfaction in each ofits markets.
Hydraulics Group is an indus-try leader in the design, production,and marketing of a full spectrum ofquality hydraulic components andsystems to provide force and mo-tion and control for industrial, mo-bile, marine, and energy-relatedmachinery and equipment.
Instrumentation Group isdedicated to being a global leaderin the design, manufacture and dis-tribution of high quality, critical flow,and ultra high purity componentsfor a broad spectrum of markets.
Lenntech [email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
Effective 8/97 Revised 08/02 1997 Parker Hannifin CorporationAll Rights ReservedPage 1 of 1
Process Filtration Division
Introduction
Foreword
We are pleased to provide the following edition of theParker Hannifin Corporation, Process Filtration Division,catalog. The information contained in this manual is for theuse of Parker Hannifin Corporation, Process FiltrationDivision, distributors and their customers in the selectionand specification of Process Filtration Division vesselsand media.
In order to keep this catalog complete and correct, we willperiodically send revised catalogs with updated materials.
Please fill out the card below to receive updated catalogsand send it to:
Company Name:Your Name:
Position:
Address:City, State, Zip:Telephone:Catalog # (see front cover):
i
Lenntech [email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
Effective 8/97 Revised 03/04 2002 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
Process Filtration Division
Table of Contents
Page
iii
C-8500 Fulflo TruBind 300 Series CartridgesC-8510 Fulflo TruBind 400 Series CartridgesC-8520 Fulflo TruBindTM 700 Series CartridgesC-8530 Fulflo Activated Carbon Cartridges
Sorbent Cartridge SeriesPolymeric MediaPolymeric MediaPolymeric MediaActivated Carbon
NEW
NEW
ForewordTable of ContentsIntroduction/Customer Support InformationProduct Line Overview
C-7010 Advantage AF Filter Cartridges (Mega-Pure)C-7011 Advantage AF+ Filter Cartridges (Mega-Pure)C-7012 Advantage PS Filter Cartridges (Ultra-Pure)C-7014 Advantage PS Filter Cartridges (Mega-Pure)C-7017 Advantage PS Filter Cartridges (General Grade)C-7018 Evadur Filter CartridgeC-7025 Advantage PF Filter Cartridges (Ultra-Pure)C-7026 Advantage PF Filter Cartridges (Mega-Pure)Pleated Filter Cartridge Series
Fulflo AdvantageTM AP Filter CartridgesFulflo PCC Filter CartridgesFulflo 1401 High Pressure Filter CartridgesFulflo Poly-Mate PM/PXD Filter CartridgesFulflo Glass-Mate PMG Filter CartridgesFulflo Poly-Mate Plus PMP Filter CartridgesFulflo Abso-Mate PAB Filter CartridgesFulflo Slurry-Mate SMC Filter CartridgesFulflo MegaFlow+TM MFA Filter CartridgesFulflo MegaFlowTM MFN Filter CartridgesFulflo 336 Pleated CartridgesFulflo Flo-Pac FP Filter CartridgesFulflo Flo-Pac+ FPE Filter Cartridges
Wound Depth, Resin Bonded and Melt Blown Filter Cartridge SeriesC-1000 Fulflo HoneycombTM HFT Filter CartridgesC-1030 Fulflo XTL Filter CartridgesC-1060 Fulflo SWC Filter CartridgesC-1301 Fulflo MegaBond Plus MBP Filter CartridgesC-1307 Fulflo DuraBond DBC Filter CartridgesC-1320 Fulflo EcoBond EBC Filter CartridgesC-1321 Avasan AVS Filter CartridgeC-1620 Fulflo ProBond PRO Filter CartridgesFilter Bag Media and Strainer Series
All FluoropolymerAll FluoropolymerPolyethersulfonePolyethersulfonePolyethersulfonePolyethersulfonePTFEPTFE
Micron Ratings 0.05 to 1Micron Ratings 2 to 60Micron Ratings 0.1 to 0.65Micron Ratings 0.03 to 0.45Micron Ratings 0.03 to 0.65Micron Ratings 0.03 to 0.65Micron Ratings 0.1 to 1Micron Ratings 0.05 to 1
PolypropyleneCellulosicCellulosic and PolypropylenePolypropyleneMicrofiberglassPolypropylenePolypropylenePolypropyleneCellulosic and PolypropyleneCellulosic and PolypropyleneCellulosic and PolypropyleneCellulosicCellulosic
Micron Ratings 0.3 to 70Micron Ratings 2 to 60Micron Ratings 2 to 100Micron Ratings 0.5 to 60Micron Ratings 0.45 to 40Micron Ratings 0.25 to 100Micron Ratings 0.2 to 70Classification Codes 02 to 16Micron Ratings 1 to 70Micron Ratings 0.5 to 10Micron Ratings 3 to 100Micron Ratings 0.5 to 60Micron Ratings 0.5 to 60
Micron Ratings 0.5 to 150Micron Ratings 1 to 30Micron Ratings 1 to 100Micron Ratings 1 to 120Micron Ratings 1 to 100Micron Ratings 1 to 50Micron Ratings 1 to 75Micron Ratings 2 to 125
Various FibersCotton and PolypropyleneCotton and PolypropylenePolypropylenePolyolefinPoypropylenePoypropylenePhenolic Resin/Acrylic Fiber
316 Stainless Steel316 Stainless SteelVarious Fibers
C-1069 Fulflo Basket StrainersC-1070 Fulflo Coaxial Retainer BasketC-5030 Fulflo Filter Bags
20 to 100 MeshUse with Size #2 mesh & felt mediaMicron Ratings 0.5 to 800
C-2010C-2020C-2030C-2040C-2041C-2044C-2047C-2048C-2051C-2055C-2060C-4015C-4016
13579
111315
17192123273133373941434547
4953555759616365
676971
73757779
iiiiv
vii
IntroductionIntroduction
Membrane Filter Cartridge Series
Page 2 of 2
Fulflo WH Filter VesselsFulflo WY Filter VesselsFulflo FH5 Filter VesselsFulflo FH7 & 12 Filter VesselsFulflo SF Filter VesselsFulflo HT Filter VesselsFulflo S Filter VesselsFulflo MP Filter VesselsFulflo MegaFlow MP Filter VesselsFulflo FE Filter VesselsFulflo FP Filter VesselsFulflo FPM Oil Filter VesselsFulflo P Filter Vessels
C-3006C-3010C-3020C-3025C-3060C-3065C-3070C-3075C-3076C-3140C-3160C-4020C-4030
Multi-Cartridge Filter Vessel Series
C-3000C-3001C-3002C-3003C-3004C-3005C-3050C-3052C-3055
Fulflo "B" Series Filter VesselsFulflo "B" Series Filter VesselsFulflo High Pressure Filter VesselsFulflo FB Oil Burner Filter AssemblyFulflo SSTC Filter VesselsFulflo "M" Series Filter VesselsFulflo LT Filter VesselsAdvantage PFA Filter VesselsFulflo NP Filter Vessels
Single Cartridge Filter Vessel SeriesFulflo Metallic Filter Cartridges Pleated & Cylindrical 304SS & 316 SS Micron Ratings 2 to 840
Metallic Media SeriesC-9000
Page
Carbon Steel Brass & Stainless Steel Carbon & Stainless Steel Steel 316 Stainless Steel Carbon & Stainless Steel SAN/Polypropylene PFA Natural Polypropylene
304 and 316L Stainless Iron, Carbon & Stainless Carbon, 304 & 316 Stainless 304 & 316L Stainless Carbon, 304, 316 Stainless Carbon Steel Carbon, 304, 316 Stainless 304L & 316L Stainless Carbon, 304L & 316L Stainless Carbon, 304L & 316L Stainless Carbon & 304L Stainless Steel Carbon Steel
High Temperature
Horizontal & Vertical Horizontal & Vertical
838587899193959799
101103105107109111113115119121123125
C-7034 Advantage PS Sanitary Vessels
C-4022
A-700A-705A-710A-730A-735A-740A-750A-770A-800A-1100A-1100APD 4099
Pleated Cartridge Configurations GuideStandard Screen Micrometer Conversion ChartFulflo Micrometer Rating MatrixFlow Rate/Dirt Loading ChartVessel Pressure DropMeasurement Conversion TablesViscosity Conversion TableMaterials Selection Guide for Gas and Liquid FiltersGlossary of Filtration TerminologyFilter Application Specification SheetFilter Application Specification Sheet AddendumOffer of Sale
Appendix
Fulflo SB Filter VesselsFulflo FCB Filter VesselsFulflo FB Filter VesselsFulflo GB Filter VesselsFulflo CB Filter Vessels
C-5000C-5001C-5002C-5004C-5006
Bag Filter Vessel Series 316L Stainless
Fulflo PC Portable Cart Filtration System Series
Carbon, 304 & 316 Stainless Carbon & 304 Stainless Carbon, 304L & 316L Stainless Carbon, 304L & 316L Stainless Carbon & 304 Stainless
131
133
135
137
139
127
129
141
143
145
147
149
151
153
155
157
179
183
185
187
81
Lenntech [email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
Effective 8/97 Rev. 08/02 1997 Parker Hannifin CorporationAll Rights ReservedPage 1 of 1
Process Filtration Division
Introduction
Introduction/CustomerSupport Information
Introduction
Parker Hannifin Corporation is comprised of eight globaloperating groups: Filtration, Climate and Industrial Controls,Aerospace, Hydraulics, Instrumentation, Automation, FluidConnectors and Seal.
The Filtration group consists of ten filtration technical salesand service locations, including the Process Filtration Divi-sion, Filtration & Separation Division, Hydraulic Filter Divi-sion, Racor Division, Filter Division Europe, Finn Filter Divi-sion, and Parker Hannifin, Brazil and Parker Hannifin KoreaLimited.
Customer Support Information
Meeting Your Exact Filter NeedsParker knows the importance of selecting the right filtrationsystem for optimum effectiveness and efficiency. Our computer-aided product selection systems help you find the right filter foreach application. Evaluating size, flow, efficiency, media and othervariables will take the guesswork out of the process. Thisprovides maximum value for each application: as fine asnecessary rather than as fine as possible.
Technical Support You Can Count OnParkers technical resources assure you of the right filtrationtechnologies, advanced designs, consistent manufacturing and anetwork of helpful, specialized professionals trained tosupport your team.
We listen to you. Then we design the right filtration system. Parkerholds over 150 patents on innovative filtration products, includingfiltration membranes, differential pressure indicators, separators,cartridge bypass valves and spin-on/spin-ins.
Parker Filtration makes the technological investments needed toassure the highest quality products. Examples are moderncleanrooms, sophisticated testing systems such as E.S.M., CAD/CAM engineering, CNC integrated equipment and an extensivecomputer database (inPHorm) that is helping us developtomorrows filtration products today.
Quality Is Top Priority at ParkerParker Filtration has had a Total Quality Management System inplace for years, as well as a Director of Corporate Quality for all ofParker. This structure helps us continually meet our customersexpectations for the highest technical standards, reliable supply andresponsive service. From the Group President on down,Quality at Parker Filtration means more than making a product theright way. Quality permeates our whole organization so that everyemployee thinks about what he or she does and what is expected byour customers.
Always at Our Customers ServiceParker filtration distributors provide local stock and technicaldesign help including 24-hour emergency service. And they arefurther supported by our ever ready manufacturing teams. Weservice a variety of filtration applications and have qualityreplacement elements for competitive products.
So if you need more technical literature or applicationssupport, please call 1-800-C-Parker for the name andlocation of the nearest distributor.
For additional manuals or to request sales support ortechnical materials, contact the Process Filtration Divisionmarketing department at (317)-275-8300.
And remember, the applications information containedin this catalog is general in nature. For technical applicationsassistance and problem solving, contact the Process FiltrationDivision engineering department at (317) 275-8300 or call1-888-C-FULFLO.
For more printed technical information, ask for our texttitled Filtration Technology or our filtration selectionsoftware package, inPHorm.
v
Effective 8/97, Revised 03/03 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 1
Process Filtration Division
Introduction
Product Line Overview
An Innovator in FiltrationTechnology
Parker manufactures a wide variety of filtration products.These products, including both vessels and replaceablemedia, are used extensively in the beverage, chemicalprocessing, cosmetic, food processing, metalworking,paint, ink, pharmaceutical and photo-processingindustries. Theyre also used for prefiltration of feedwater in reverse-osmosis water treatment plants. Severalof these products are "Certified to ANSI/NSF 61" standardfor contact with drinking water components.
In microfiltration, Parker is pioneering breakthroughs formicro-chip fabricators. Our systems improve yields bydelivering ultra-pure chemicals and water filtered to thelimits of detection.
When you need process fluid filters to remove contamina-tion, such as gels or grit, Parker can deliver. In suchapplications as oil and gas exploration/productionprocessing or removal of wastes and byproducts,Parker filters remove particles from 0.03 to 840 microns.
Our process filtration capabilities also include suchapplications as adhesives, resins, water, paints, edibleoils, photographic chemicals and magnetic coatings.Advanced technology, ultra-pure, chemically inert filtrationapplications include electronic components, pharmaceuti-cals, beverages and reverse-osmosis membraneprefiltration protection.
Parkers broad filter line includes membrane cartridges,pleated cartridges, vessels (ASME code and non-code),high-efficiency filter bags, melt blown cartridges, stainlesssteel media and more. Our filter media provide a widerange of micron removal choices from 0.03 to 840microns, with efficiencies as high as 99.99+ percent.
Further, Parkers leadership in ultra-pure microprocessfiltration is recognized by a growing number of customers.We contribute to improved yields by helping to deliverultra-pure chemicals and water to the wafer surface.
Finally, Parker bag media and bonded media (ProBond)are available for high-viscosity applications such as theremoval of oversize particles in paints and inks. Thewound cartridge (HFT or XTL) is an economical choicefor general clarification operations on a wide variety ofliquids from water to corrosive liquids to organic liquids.Wound cartridges, bag media and pleated products thatmeet FDA requirements are available for food contactservice such as potable water, edible oils, soft drinks, beerand corn syrup.
Membrane CartridgesParkers line of membrane cartridges is ideal for criticalapplications when high performance is necessary. Theyare available in two types of media: polyethersulfone, andPTFE fluoropolymer.
Pleated Polypropylene CartridgesPleated polypropylene filter elements, such as ourbackwashable Poly-Mate cartridge used in beer filtrationand similar applications, provide better filtration value.
Resin Bonded CartridgesParkers ProBond cartridges provide two-stage filtration inan innovative one-piece filter. The outer layer of ProBondacts as a prefilter trapping large particles, while the insidelayer provides final filtration. The ProBond is available inparticle removal ratings from 2 to 150 microns.
Melt Blown CartridgesProcess Filtrations MegaBond Plus Cartridges areabsolute-rated depth media that offer consistent produc-tion yields and quality due to fixed pore structure and finerremoval ratings for use in a wide variety of applications.
VesselsParker ASME code and non-code filter vessels areavailable in a variety of configurations for a broad range ofliquid, compressed air and gas applications.
vii
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigationby users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the currentproduct catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsiblefor making the final selection for the products and systems and assuring that all performance, safety and warning requirements of the application are met.
Process Filtration Division
Mega-Pure Membrane Series
Advantage AFFilter Cartridges
Applications
UHP Water Ozonated Cold Hot
UHP Chemicals Acids Solvents Photoresists Alkalies Developers
Mixed Acids StrippersEquipment Point-of-Use Tools Chemical Delivery
System Cleaning Etching Photolithography Wet Benches
Increased Flow Rate With NextGeneration, All FluoropolymerMembrane Filter CartridgesA unique PTFE membrane provides superior flow rateand efficiency maximizing the performance of thefluoropolymer AdvantageTM AF filter cartridge. The Ad-vantage Mega-Pure AF Series of filter cartridgesmeets or exceeds the requirements of the filtration ofUHP liquids used in the fabrication of state-of-the-artmicroelectronic devices.
The Mega-Pure Advantage AF Membrane Series isavailable in 0.05m, 0.1m, 0.2m, 0.45m and 1mpore sizes.
Superior PTFE Membrane YieldsMaximum Filtration Results
Features and Benefits Parkers TQM System Assures ConsistentPerformance and Reliable Filtration
Strict quality control measures include rigoroustesting for rinse up, shedding, flow rate andextractable levels.Integrity-tested and testable in situThermally welded, eliminating adhesive extractables.Biosafe in accordance with USP Class VI-121CPlastics Tests.Specifically designed to ensure cleanliness.All materials of construction are FDA listed asacceptable for potable and edible liquid contactaccording to CFR Title 21.
Unique PTFE membrane ensures high flow rates andsuperior retention.
Rinsed to 18 megohm-cm resistivity with pulsed,ozonated, UHP water.
Available prewetted for immediate use in process.
Advantage AF cartridges are non-fiber releasingand superior in extractable levels.
Engineered for high temperature resistance.
Bulletin C-7010 Eff. 4/97, Rev. 03/042000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
PTFE Membrane PTFE Membrane PTFE Membrane PTFE Membrane PTFE Membrane
1
Process Filtration Division
End Cap ConfigurationBC =
DC =
HH =SC =TC =
TC
Flow Factors (10 in cartridge):
Pore Size GPM/ LPM/ PSID/ Bar/(m) 1 PSID 1 Bar 1 GPM 1 LPM
Mega-Pure Membrane Series
Ordering Information
PTFE Cartridges (4 in):Flow rate vs. P for a 1 cpsliquid @ 73F (23C)**
PTFE Cartridges (10 in):Flow rate vs. P for a 1 cpsliquid @ 73F (23C)**
Flow Factors (4 in cartridge):
Bulletin C-7010Page 2 of 2
* A trademark of E. I. duPont de Nemours & Co.
** Consult factory for gas flow data.
Flow Advantages Advantage AF cartridges offer greater
flow rate while decreasing processing timeand increasing recirculation, fluid cleanli-ness, yields and capacity.
Maintaining the current flow rate whilelowering the differential pressure allowsAdvantage AF cartridges to achieve longer lifeand lower particle counts.
Maintaining the current flow rate anddifferential pressure with Advantage AFcartridges allows the use of smaller filterhousings with smaller footprint.
Maintaining the current flow rate anddifferential pressure with lower micron-rated Advantage AF cartridges improvesyields and provides cleaner fluids.
SpecificationsMaterials of Construction:
Surface Area (10 in cartridge): Minimum 6.5 ft2 (0.9 m2)
Integrity Test: Bubble Point (Using N2 and a
membrane wet with 100% IPA at73F [23C]):
0.05m: > 50 psi (3.4 bar)0.1m: > 24 psi (1.7 bar)0.2m: > 16 psi (1.1 bar)0.45m: > 6 psi (0.4 bar)1m: > 3 psi (0.2 bar)
Outside Diameter: 2.5 in (63.5 mm)Inside Diameter 0.825 in (22.2 mm)Lengths: 2-30 in (10-76 cm)
Membrane: hydrophobic PTFEMembrane Support/Drainage: PFAStructural Components: PFASeal Material: variousSealing Method: thermal welding
Dimensions:
LPM
0.1
m
0.2
m
40 60200 80LPM
0
.1
.2
.3
0
1
2
3
4
5
Dif
fere
nti
al P
ress
ure
PS
I
GPM Flow Rate
BA
R
0 5 10 15 20 25
0.05m
0.1
m
0.2
m
0.45m
1m
403010 200 50
0
.1
.2
.3
0
1
2
3
4
5
Dif
fere
nti
al P
ress
ure
PS
I
GPM Flow Rate
BA
R
0 3 6 9 12 15
0.05m
0.45m
1m
T
Seal MaterialD = CR 570E = EPDMK = KR 4079T = PFA/Viton* (O-ring) PTFE (gasket)V = Viton*X = No O-Ring
AF
Cartridge CodeAF = All
Fluoro- polymer
D
Pore Size (m)D = 0.05S = 0.1F = 0.2R = 0.45Q = 1
10
Length (in)02 = 204 = 410 = 1020 = 2030 = 30
A
Diameter (in)A = 2.5 015 O-Ring/Flat
(4 in only)116 O-Ring/Flat
(4 in only)DOE226 O-Ring/Flat222 O-Ring/Flat
0.05 1.5 82 0.67 0.012 0.1 2.5 137 0.40 0.007 0.2 3.5 192 0.30 0.005 0.45 5.0 274 0.20 0.004 1 6.0 329 0.17 0.003
0.05 0.6 33 1.7 0.0310.1 1.0 55 1.0 0.0180.2 1.5 82 0.7 0.0130.45 2.0 110 0.5 0.0091 2.4 132 0.4 0.007
Pore Size GPM/ LPM/ PSID/ Bar/(m) 1 PSID 1 Bar 1 GPM 1 LPM
2
W
Special PreparationW = Prewetted With Ozonated UHP Water
Recommended Operating Conditions: Maximum Temperature:
302F (150C) at 20 P (1.4 bar) Maximum Differential Pressure:
Forward:70 psi (4.8 bar) at 77F (25C)30 psi (2.1 bar) at 315F (157C)
Reverse:50 psi (3.4 bar) at 77F (25C)
Quality Standard Each cartridge is flushed with pulsed
UHP ozonated water and monitoreddownstream for TOC and particle count.
The release criteria are no TOCcontribution (ppb) and less than 4particles/ml at the rating or greater for15 minutes.
Each lot of cartridges is evaluated formetallic ion contribution in 10% HNO3after a 24-hour static soak.
Total metals contribution cannot exceed25 ppb.
Lenntech [email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis andtesting, is solely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of theapplication are met.
Process Filtration Division!Bulletin C-7011 Eff. 4/97, Rev. 03/04
2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
Maximized Flow Rate With NextGeneration All FluoropolymerMembrane Filter Cartridges
A unique PTFE membrane provides superior flow rate,surface area and efficiency maximizing theperformance of the all fluoropolymer AdvantageAF+ membrane filter cartridge. The Mega-PureAdvantage AF+ Series of filter cartridges meets orexceeds the requirements for the filtration of UHPliquids used in the fabrication of state-of-the-artmicroelectronic devices.
The Mega-Pure Advantage AF+ Membrane Seriesis available in 0.05m, 0.1m, 0.2m, 0.45m and1m pore sizes.
Mega-Pure Membrane Series
Advantage AF+Filter Cartridges
ApplicationsUHP Water Ozonated Cold Hot
UHP Chemicals Acids Solvents Photoresists Alkalines Developers
Mixed Acids Strippers
Equipment Point-of-Use Tools Chemical Delivery
System Cleaning Etching Photolithography Wet Benches
PTFE Membrane
Features and BenefitsSuperior PTFE Membrane Yields MaximumFiltration Results.
Highest flow rate cartridge available for smallestfootprint requirement.Rinsed to 18 megohm-cm resistivity with pulsed,ozonated, UHP water.Unique PTFE membrane ensures high flow ratesand superior retention.Available prewetted for immediate use in process.Advantage AF+ cartridges are non-fiber releasingand superior in extractable levels.Engineered for high temperature resistance.
Parkers TQM System Assures ConsistentPerformance and Reliable Filtration
Strict quality control measures include rigoroustesting for rinse up, shedding, flow rate andextractable levels.Integrity-tested and testable in situ.Thermally welded, eliminating adhesive extractables.Biosafe in accordance with USP Class V1-121oCPlastic Tests.Specifically designed to ensure cleanliness.All materials of construction are FDA listed asacceptable for potable and edible liquid contactaccording to CFR Title 21.
3
Process Filtration Division
A F
Cartridge CodeAF = All Fluoropolymer
Mega-Pure Membrane Series
Ordering Information
PTFE Cartridges (4 in):Flow rate vs. P for a 1 cpsliquid @ 73F (23C)**
PTFE Cartridges (10 in):Flow rate vs. P for a 1 cpsliquid @ 73F (23C)**
Flow Factors (4 in cartridge):
Pore Size GPM/ LPM/ PSID/ Bar/(m) 1 PSID 1 Bar 1 GPM 1 LPM
0.05 0.8 44 1.3 0.024 0.1 1.3 71 0.8 0.015 0.2 2.0 110 0.5 0.009 0.45 2.8 153 0.4 0.007 1 3.3 181 0.3 0.005
Flow Factors (10 in cartridge):
Pore Size GPM/ LPM/ PSID/ Bar/(m) 1 PSID 1 Bar 1 GPM 1 LPM
0.05 2.0 110 0.50 0.009 0.1 3.3 181 0.30 0.005 0.2 5.0 274 0.20 0.004 0.45 7.1 389 0.14 0.003 1 8.3 455 0.12 0.003
Bulletin C-7011Page 2 of 2
* A trademark of E. I. duPont de Nemours & Co.
** Consult factory for gas flow data.
T
Seal MaterialD = CR 570E = EPDMK = KR 4079T = PFA/Viton*V = Viton*X = No O-Ring
W
Special PreparationW = Prewetted With Ozonated UHP
Water
TC
End Cap ConfigurationTC = 222 O-Ring/Flat
10
Length (in)04 = 410 = 1020 = 2030 = 30
C
Diameter (in)C = 3.25
D
Pore Size (m)D = 0.05S = 0.1F = 0.2R = 0.45Q = 1
Flow Advantages Advantage AF+ cartridges offer 30%
greater flow rate while decreasing process-ing time and increasing recirculation, fluidcleanliness, yields and capacity.
Maintaining the current flow rate whilelowering the differential pressure allowsAdvantage AF+ cartridges to achieve longer lifeand lower particle counts.
Maintaining the current flow rate anddifferential pressure with Advantage AF+
cartridges allows the use of smaller filterhousings with smaller footprint.
Maintaining the current flow rate anddifferential pressure with lower micron-ratedAdvantage AF+ cartridges improves yieldsand provides cleaner fluids.
Recommended Operating Conditions: Maximum Temperature:
375F (191C) at 20 P (1.4 bar) Maximum Differential Pressure:
Forward:70 psi (4.8 bar) at 77F (25C)30 psi (2.1 bar) at 315F (157C)
Reverse:50 psi (3.4 bar) at 77F (25C)
Quality Standard Each cartridge is flushed with pulsed UHP
ozonated water and monitored down-stream for TOC and particle count.
The release criteria are no TOC contribu-tion (ppb) and less than 4 particles/ml atthe rating or greater for 15 minutes.
Each lot of cartridges is evaluated formetallic ion contribution in 10% HNO3after a 24-hour static soak.
Total metals contribution cannot exceed25 ppb.
403010 200 50LPM
0
.1
.2
.3
0
1
2
3
4
5
Dif
fere
nti
al P
ress
ure
PS
I
GPM Flow Rate
BA
R
0 3 6 9 12 15
0.05m
0.1
m
0.2
m
0.45m
1m
SpecificationsMaterials of Construction:
Surface Area (10 in cartridge): Minimum 10.5 ft2 (0.9 m2)
Integrity Test: Bubble Point (Using N2 and a
membrane wet with 100% IPA at73F [23C]):
0.05m: > 50 psi (3.4 bar)0.1m: > 24 psi (1.7 bar)0.2m: > 16 psi (1.1 bar)0.45m: > 6 psi (0.4 bar)1m: > 3 psi (0.2 bar)
Outside Diameter: 3.25 in (82.6 mm)Inside Diameter: 1.125 in (29 mm)Lengths: 4-30 in (10-76 cm)
Membrane: hydrophobic PTFEMembrane Support/Drainage: PFACore, Sleeve, Adaptors: PFA/PTFE alloyEnd Caps: PFASeal Material: various
Sealing Method: thermal welding
Dimensions:
40 60200 80LPM
0
.1
.2
.3
0
1
2
3
4
5
Dif
fere
nti
al P
ress
ure
PS
I
GPM Flow Rate
BA
R
0 5 10 15 20 25
0.05m
0.1
m
0.2
m
0.45m
1m
4
Lenntech [email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis andtesting, is solely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of theapplication are met.
Process Filtration DivisionBulletin C-7012 Eff. 4/97, Rev. 03/04 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
Features and BenefitsSuperior Polyethersulfone Membrane YieldsMaximum Filtration Results High surface area design provides excellent flow rates
and life while maintaining high particle removal efficiency. Rinsed with 18 megohm-cm UHP water for high purity. Excellent resistance to most sanitizing agents such as
hot water, concentrated hydrogen peroxide and activechlorine compounds.
Low pressure drops improve filtration efficiency andextend filter life.
Spunbonded polypropylene support materials eliminatesites for potential shedding and increased particle counts.
High Flow Rate CapabilityWith PolyethersulfoneMembrane Filter CartridgesUltra-Pure polyethersulfone membrane cartridges providesuperior flow rates and stand up to a wide variety ofchemicals in applications including chemical, food andbeverage, and pharmaceutical. Unique polyethersulfoneconstruction features a high-surface area design whichallows for excellent flow rates and high particle removalefficiency. Hydrophilic polyethersulfone membranecartridges are ready for use and do not requireprewetting.
The Ultra-Pure Polyethersulfone Membrane Series isavailable in 0.1m, 0.2m, 0.45m and 0.65m pore sizes.
Ultra-Pure Membrane Series
Advantage PSFilter Cartridges
Polyethersulfone Membrane
Parkers TQM System Assures ConsistentPerformance and Reliable Filtration Strict quality control measures include rigorous testing
for rinse up, shedding, flow rate and extractable levels. Integrity-tested and testable in situ. Thermally welded, eliminating adhesive extractables. Biosafe in accordance with USP Class VI-121C
Plastics Tests. Specifically designed to ensure cleanliness. All materials of construction are FDA listed as
acceptable for potable and edible liquid contactaccording to CFR Title 21.
InformationStorage Optical Disk
Manufacturing Hard Disk
Manufacturing Optical Coatings Photographic
Films
Chemicals Bulk Chemicals Process Water Pharmaceutical
Intermediates Diagnostics
& Reagents Electroless
Nickel Plating Point-of-Use &
Distribution
ApplicationsFood & Beverage Bottled Water Wine Beer Process Water Vinegar Aseptic
PackagedLiquids
Edible Oils
5
Process Filtration Division
TC
End Cap Conguration
Bulletin C-7012Page 2 of 2
SpecificationsMaterials of Construction: Membrane: hydrophilic
polyethersulfone Membrane Support/Drainage:
polypropylene Core/Cage: polypropylene End Fittings: polypropylene Seal Material: various Sealing Method: thermal welding
Dimensions: Diameter: 2.70 in (6.8 cm) Lengths: 10-40 in (25-102 cm)
Surface Area (10 in cartridge): Minimum 6.5 ft2 (0.6 m2)
Endotoxins: < 0.25 EU/ml
Integrity Test: Bubble Point (in UHP water):
0.1m > 70 psig (4.8 bar)0.2m > 45 psig (3.1 bar)0.45m > 24 psig (1.7 bar)0.65m > 16 psig (1.1 bar)
Diffusion Rate (10 in cartridge):0.1m < 33cc/min at 40 psig (2.7 bar)0.2m < 33cc/min at 30 psig (2.1 bar)0.45m < 33cc/min at 15 psig (1.0 bar)0.65m < 33cc/min at 10 psig (0.7 bar)
Recommended Operating Conditions: Maximum Temperature:
176F (80C) @ 30 P (2.1 bar) Maximum Differential Pressure:
Forward:70 psi (4.8 bar) @ 77F (25C)30 psi (2.1 bar) @ 176F (80C)
Reverse:50 psi (3.4 bar) @ 77F (25C)
Sterilization/Sanitization Methods: Hot Water: 190F (88C) Autoclave: 250F (121C)
for 30 minutes at 15 psi (1.0 bar) In situ Steam: 284F (140C)
for 60 minutes at 15 psi (1.0 bar) Chlorine Hydrogen Peroxide Sodium Hypochlorite Sanitizing Agents
(see Materials Selection Guide)
Ultra-Pure Membrane Series
* Trademark of E. I. du Pont de Nemours & Co.** Consult Process Filtration Division for gas flow data.*** Available only in 9-5/8 (-9) and 19-5/8 (-19) lengths.1 PFA/Viton is O-Ring only; for DOE (HH), gasket is expanded PTFE.
Polyethersulfone Cartridges:Flow rate vs. DP for a 1 cpsliquid @ 73F (23C)**
P S
Cartridge CodePS = Polyethersulfone
U
GradeU = Ultra-Pure
Ordering Information
E
Seal MaterialB = Buna NE = EPDMS = SiliconeT = PFA/Viton* 1V = Viton*X = No O-Ring/
No Gaskets
10
Length (in)10 = 1020 = 2030 = 3040 = 40
B
Diameter (in)B = 2.7
F
Pore Size (m)T = 0.03S = 0.1F = 0.2R = 0.45H = 0.65
Flow Factors: Pore Size GPM/ LPM/ PSID/ Bar/ (m) 1 PSID 1 Bar 1 GPM 1 LPM 0.1 1.8 99 0.56 0.010 0.2 3.5 192 0.29 0.005 0.45 5.5 301 0.18 0.003 0.65 6.5 356 0.15 0.003
40 60200 80LPM
0
.1
.2
.3
0
1
2
3
4
5
Diff
eren
tial P
ress
ure
PSI
GPM Flow Rate
BAR
0 5 10 15 20 25
0.05m
0.2m
0.45
m
0.65m
AR = 020 O-Ring/RecessedH H = DOE (Gaskets)LL = 120/120***LR = 120 O-Ring/Recessed***PR = 213 O-Ring/Recessed***S C = 2-226/FlatSF = 2-226/FinTC = 2-222/FlatTF = 2-222/Fin
6
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis andtesting, is solely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of theapplication are met.
Process Filtration DivisionBulletin C-7014 Eff. 10/98, Rev. 08/02 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
High Flow Rate CapabilityWith PolyethersulfoneMembrane Filter Cartridges
Microelectronics Semiconductor Optical Disks Printed Circuits Hard Disks
Features and BenefitsSuperior Polyethersulfone Membrane YieldsMaximum Filtration Results High surface area design provides excellent flow rates
and extended filter life while maintaining high particleremoval efficiency.
Rinsed to 18 megohm-cm resistivity with UHP water. Spunbonded polypropylene support materials
eliminate sites for potential shedding and increasedparticle counts.
Provides broad chemical compatibility.
Mega-Pure Membrane Series
Advantage PSFilter Cartridges
Polyethersulfone Membrane
Parkers TQM System Assures ConsistentPerformance and Reliable Filtration Strict quality control measures include rigorous testing
for rinse up, shedding, flow rate and extractable levels. Integrity-tested and testable in situ. Thermally welded, eliminating adhesive extractables. Biosafe in accordance with USP Class VI-121C
Plastics Tests. Specifically designed to ensure cleanliness. All materials of construction are FDA listed as
acceptable for potable and edible liquid contactaccording to CFR Title 21.
ApplicationsUHP Water Central PAD Polishing
Stations Point-of-Use
UHP Chemical Specialty
Chemicals Point-of-Use Bulk Photoresists
and Solvents
Mega-Pure polyethersulfone membrane cartridges providesuperior flow rates over the competition. The unique con-struction features a high-surface area design that allowsfor excellent flow rates and high particle removal efficiency.Hydrophilic polyethersulfone membrane cartridges requireno prewetting and are ready to use. The Mega-PurePolyethersulfone Membrane Series of filter cartridgesmeets or exceeds requirements for the filtration of UHPliquids used in the fabrication of state-of-the-art microelec-tronic devices.
The Mega-Pure Polyethersulfone Membrane Series isavailable in 0.03m, 0.1m, 0.2m and 0.45m pore sizes.
7
Process Filtration Division
Mega-Pure Membrane Series
Specications
Materials of Construction:? Membrane: hydrophilic polyethersulfone? Membrane Support/Drainage: polypropylene? Structural Components: polypropylene? Seal Material: various? Sealing Method: thermal welding
Dimensions:? Diameter: 2.7 in (6.8 cm)? Lengths: 10-40 in (25-102 cm)
Surface Area (10 in cartridge):? Minimum 6.5 ft2 (0.6 m2)
Integrity Test:? Bubble Point (in UHP water):
0.03m > 90 psig (6.2 bar)0.1m > 70 psig (4.8 bar)0.2m > 45 psig (3.1 bar)
0.45m > 24 psig (1.7 bar)
Polyethersulfone Cartridges:Flow rate vs. DP for a 1 cpsliquid @ 73F (23C)**
Flow Factors:
Pore Size GPM/ LPM/ PSID/ Bar/ (m) 1 PSID 1 Bar 1 GPM 1 LPM
0.03 1.2 66 0.85 0.015 0.1 1.8 99 0.56 0.010 0.2 3.5 192 0.29 0.005 0.45 5.5 301 0.18 0.003
T C
End Cap ConfigurationHH = DOE (Gaskets)SC = 2-226/FlatSF = 2-226/FinTC = 2-222/FlatTF = 2-222/Fin
P S
Cartridge CodePS = Polyethersulfone
E
GradeE = Electronics
Ordering Information
T
Pore Size (m)T = 0.03S = 0.1F = 0.2R = 0.45
B
Diameter(in)B = 2.7
10
Length (in)10 = 1020 = 2030 = 3040 = 40
E
Seal MaterialB = Buna NE = EPDMS = SiliconeT = PFA/Viton*V = Viton*X = No O-Ring
Bulletin C-7014Page 2 of 2
* Trademark of E. I. du Pont de Nemours & Co.** Consult Process Filtration Division for gas flow data.
40 60200LPM
0
1
2
3
4
5
Dif
fere
nti
al P
ress
ure
PS
I
GPM Flow Rate
0 5 10 15 20
0.03m
0.1
m
0.2
m
0.45
m
0
.1
.2
.3
BA
R
Diffusion Rate (10 in cartridge):0.03m < 33cc/min at 45 psig (3.1 bar)0.1m < 33cc/min at 40 psig (2.7 bar)0.2m < 33cc/min at 30 psig (2.1 bar)0.45m < 33cc/min at 15 psig (1.0 bar)
Recommended Operating Conditions: Maximum Temperature:
176F (80C) @ 30 P (2.1 bar) Maximum Differential Pressure:
Forward:70 psi (4.8 bar) @ 77F (25C)30 psi (2.1 bar) @ 176F (80C)
Reverse:50 psi (3.4 bar) @ 77F (25C)
8
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis andtesting, is solely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of theapplication are met.
Process Filtration DivisionBulletin C-7017 Eff. 10/98, Rev. 03/04 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
High Flow Rate CapabilityWith PolyethersulfoneMembrane Filter CartridgesThe General Grade polyethersulfone membranecartridges are specifically designed to provide superiorflow rates at an economical cost. The unique constructionfeatures a high-surface area design that allows for excellentflow rates and high particle removal efficiency. Hydrophilicpolyethersulfone membrane cartridges require no prewettingand are ready to use. All materials of construction are thesame as used in the electronics grade Mega-Pure seriespolyethersulfone cartridges from Parker. This assures a costeffective device while maintaining excellent performance inUPW pad applications and other recirculation applications.
The General Grade is also ideal for final filtration of water andaqueous solutions in plating, chemical process, photographic,food and beverage and bulk pharmaceutical applications.
The General Grade Polyethersulfone Membrane Series isavailable in 0.03m, 0.1m, 0.2m, 0.45m and 0.65m poresizes.
Features and BenefitsSuperior Polyethersulfone Membrane YieldsMaximum Filtration Results High surface area design provides excellent flow rates
and extended filter life while maintaining high particleremoval efficiency.
Spunbonded polypropylene support materialseliminate sites for potential shedding and increasedparticle counts.
Provides broad chemical compatibility. Excellent resistance to most sanitizing agents.
General Grade Membrane Series
Advantage PSFilter Cartridges Polyethersulfone Membrane
Parkers TQM System Assures ConsistentPerformance and Reliable Filtration Thermally welded, eliminating adhesive extractables. Biosafe in accordance with USP Class VI-121C
Plastics Tests. Specifically designed to ensure cleanliness. All materials of construction are FDA listed as
acceptable for potable and edible liquid contactaccording to CFR Title 21.
ApplicationsUHP Chemical Specialty
Chemicals Bulk
Photoresistsand Solvents
UHP Water Central PAD Polishing
Stations
Food & Beverage Bottled Water Wine Beer Process Water Vinegar Edible Oils Aseptic Packaged
Liquids
Miscellaneous Pre, Post and
Point-Of-Use DIWater Filtration
PharmaceuticalIntermediates
Plating Solutions Bulk Chemicals
9
Process Filtration Division* Trademark of E. I. duPont de Nemours & Co.** Consult Process Filtration Division for gas flow data.*** Available only in 9-5/8 (-9) and 19-5/8 (-19) lengths.1 PFA/Viton is O-Ring only; for DOE (HH), gasket is expanded PTFE.
Bulletin C-7017Page 2 of 2
PS
Cartridge CodePS = Polyethersulfone
Ordering Information
General Grade Membrane Series
SpecificationsMaterials of Construction: Membrane: hydrophilic
polyethersulfone Membrane Support/Drainage:
polypropylene Structural components: polypropylene Seal Material: various Sealing Method: thermal welding
Dimensions: Diameter: 2.7 in (6.8 cm) Lengths: 10-40 in (25-102 cm)
Surface Area (10 in cartridge): Minimum 6.5 ft2 (0.6 m2)
Recommended Operating Conditions: Maximum Temperature:
176F (80C) @ 30 P (2.1 bar) Maximum Differential Pressure:
Forward:70 psi (4.8 bar) @ 77F (25C)30 psi (2.1 bar) @ 176F (80C)
Reverse:50 psi (3.4 bar) @ 77F (25C)
Endotoxins:
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis andtesting, is solely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of theapplication are met.
Process Filtration DivisionBulletin C-7018 Eff. 1/04, Rev. 03/04 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
Evadur High Flow, HighPurity Membrane CartridgeEvadur is a high purity polyethersulfone membranecartridge designed specifically for demanding waterand chemical filtration applications. Evadur offers aunique pleat design and rugged construction forsuperior retention and filter life. The hydrophilicpolyethersulfone membrane resists a wide variety ofchemicals. Evadur achieves very high flow rates whilemaintaining a very low differential pressure. Evadurhas also been designed to have extremely fast flush-up or clean up times. Rely on Evadur for your highflow, high purity membrane applications.
General Grade Membrane Series
Evadur Filter Cartridges
Polyethersulfone Membrane
Features and BenefitsHigh bacterial retention.
Complete product offering from 0.03 to0.65 microns.
High purity polypropylene support structures.
Thermally bonded to exclude liquid captureand extractables.
All materials biosafe in accordance with USPClass VI-121C Plastic Test.
All materials listed as acceptable for potable andedible contact according to CFR Title 21.
Manufactured in a zone Class 10 clean room.
Manufactured with strict quality controlmeasuring rinse-up, integrity testing, flowrate, and extractable levels.
Parker Process Filtration Division is anISO9000:2000 Certified Division.
Applications Pre and post RO filtration Point-of-use filtration Bottled water Specialty chemical
11
Process Filtration Division
* Trademark of E. I. duPont de Nemours & Co.** Consult Process Filtration Division for gas flow data.
Bulletin C-7018Page 2 of 2
Ordering Information
General Grade Membrane Series
Recommended Operating Conditions:? Maximum Temperature:
176F (80C) @ 30 P (2.1 bar)? Maximum Differential Pressure:
Forward:70 psi (4.8 bar) @ 77F (25C)30 psi (2.1 bar) @ 176F (80C)
Reverse:50 psi (3.4 bar) @ 77F (25C)
Materials of Construction:? Membrane: hydrophilic polyethersulfone? Membrane Support/Drainage: polypropylene? Structural components: polypropylene? Seal Material: various? Sealing Method: thermal welding
Dimensions:? Diameter: 2.7 in (6.8 cm)? Lengths: 10-40 in (25-102 cm)
Sterilization/Sanitization Methods:? Isopropyl Alcohol? Sodium Hydroxide? Hydrogen Peroxide? Hot Water: 190F (88C)
@ 5 psid (0.3 bar)? Autoclave: 250F (121C) for
30 minutes at 15 psi (1.0 bar)? In Situ Steam: 284F (140C)
for 60 minutes at 15 psi (1.0 bar)? Chlorine? Sodium Hypochlorite? Sanitizing Agents (see Materials Selection Guide, Bulletin C-770)
Installation Rinse-In:? Cartridges typically rinse to back
ground resistivity in less than sixminutes at 3.5 gpm/10" equivalent
Evadur flow rate vs. P for 1 cps liquid @ 73F (23C)
End Cap Conguration
EV
Cartridge CodeEV = Evadur Cartridge
B
Diameter (in)B = 2.7
10
Length (in)10 = 1020 = 2030 = 3040 = 40
Seal MaterialE = EPRB = Buna-NS = SiliconeT = PFA encapsulatedV = Viton* (o-ring only)X = No seal material
HH = Double Open EndDX = DOE w/extenderSC = 226 O-ring/Flat CapSF = 226 O-ring/FinTC = 222 O-ring/Flat Cap
TF = 222 O-ring/FinLL = 120 O-ring (both ends)LR = 120 O-ring/Recessed EndPR = 213 O-ring/RecessedAR = 020 O-ring/Recessed
E TCT
Pore Size (m)T = 0.03S = 0.1F = 0.2R = 0.45H = 0.65
40 60200LPM
0
1
2
3
4
5
Diff
eren
tial P
ress
ure
PSI
GPM Flow Rate0 5 10 15 20
0.03m
0.1
m
0.2m
0.45
m
0
.1
.2
.3
BAR
0.65m
Specifications
12
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis andtesting, is solely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of theapplication are met.
Process Filtration DivisionBulletin C-7025 Eff. 4/97, Rev. 03/04 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
Double the Flow With NextGeneration PTFE MembraneFilter CartridgesUltra-Pure PTFE membrane filter cartridges perform at thehighest flow rate to provide the cleanest fluids at the lowestpossible cost. Parkers unique PTFE membrane construc-tion serves as a low-cost alternative to all fluoropolymercartridges in less aggressive applications and maintainsbroad chemical compatibility with low extractable levels andhigh particle retention rates.
The Ultra-Pure PTFE Membrane Series is available in0.1m, 0.2m, 0.45m and 1m pore sizes.
ApplicationsPharmaceutical Tank Vents Filtration of
Compressed Gases Filtration of
SolventsProcess Gases Bulk and Point-
of-Use Gases Compressed Air
Food and Beverage Sterile Venting of Holding
Tanks Sterile CO2 Filtration Microbial Control of Inlet
Air for Bioprocessing ofFoods
Chemicals Solvents Bulk Filling Acids
Ultra-Pure Membrane Series
Advantage PFFilter Cartridges
PTFE Membrane
Features and BenefitsSuperior PTFE Membrane YieldsMaximum Filtration Results High flow rates and optimized surface area reduce
processing time and filter consumption. Rinsed with 18 megohm-cm UHP water for high purity. Non-fiber releasing. All-polypropylene component construction complemented
by a variety of O-ring seals withstands demandingoperating parameters.
Narrow pore size distribution ensures the ultimate inretention and flow rate.
Naturally hydrophobic membrane maintains air flowrates in venting and gas applications.
Available prewetted for immediate use in process.
Parkers TQM System Assures ConsistentPerformance and Reliable Filtration Strict quality control measures include rigorous testing
for rinse up, shedding, flow rate and extractable levels. Integrity-tested and testable in situ. Thermally welded, eliminating adhesive extractables. Biosafe in accordance with USP Class VI-121C
Plastics Tests. Specifically designed to ensure cleanliness. All materials of construction are FDA listed as
acceptable for potable and edible liquid contactaccording to CFR Title 21.
13
Process Filtration Division* Trademark of E. I. duPont de Nemours & Co.** Consult Process Filtration Division for gas flow data.*** Available only in 9-5/8 (-9) and 19-5/8 (-19) lengths.1 PFA/Viton is O-Ring only; for DOE (HH), gasket is expanded PTFE.
Bulletin C-7025Page 2 of 2
PF
Cartridge CodePF = PTFE
Ordering InformationF
Pore Size (m)S = 0.1F = 0.2R = 0.45Q = 1D = 0.05
B
Diameter (in)B = 2.7
10
Length (in)10 = 1020 = 2030 = 3040 = 40
E
Seal MaterialB = Buna ND = CR 570E = EPDMS = SiliconeT = PFA/Viton* 1V = Viton*X = No O-Ring/
No Gaskets
TC
End Cap Configuration
U
GradeU = Ultra-Pure
W
SpecificationsMaterials of Construction: Membrane: hydrophobic PTFE Membrane Support/Drainage:
polypropylene Structural Components:
polypropylene Seal Material: various Sealing Method: thermal welding
Dimensions: Diameter: 2.7 in (6.8 cm) Lengths: 10-40 in (25-102 cm)
Surface Area (10 in cartridge): Minimum 7.5 ft2 (0.7 m2)
Endotoxins: < 0.25 EU/ml
Integrity Test: Bubble Point (100% IPA):
0.1m > 24 psig (1.7 bar)0.2m > 16 psig (1.1 bar)0.45m > 6 psig (0.4 bar)1m > 3 psig (0.2 bar)
Ultra-Pure Membrane Series
Recommended Operating Conditions: Maximum Temperature:
176F (80C) @ 30 P (2.1 bar) Maximum Differential Pressure:
Forward:70 psi (4.8 bar) @ 77F (25C)30 psi (2.1 bar) @ 176F (80C)
Reverse:50 psi (3.4 bar) @ 77F (25C)
Sterilization/Sanitization Methods: Autoclave or in situ Steam:
250F (121C) for 30 minutes at15 psi (1.0 bar)
70% IPA 10% Hydrogen Peroxide
PTFE Cartridges:Flow rate vs. P for a 1 cpsliquid @ 73F (23C)**
Flow Factors: Pore Size GPM/ LPM/ PSID/ Bar/ (m) 1 PSID 1 Bar 1 GPM 1 LPM
40 60200 80LPM
0
.1
.2
.3
0
1
2
3
4
5
Diff
eren
tial P
ress
ure
PSI
GPM Flow Rate
BAR
0 5 10 15 20 25
0.01
m
0.2m
0.45
m
1m
Special PreparationW = Prewetted With Ozonated UHP Water
AR - 020 O-Ring/RecessedH H = DOE (Gaskets)LL = 120/120***LR = 120 O-Ring/Recessed***PR = 213 O-Ring/Rcessed***S C = 2-226/FlatSF = 2-226/FinTC = 2-222/FlatTF = 2-222/Fin
0.1 3.0 164 0.33 0.0060.2 4.5 247 0.22 0.0040.45 6.5 356 0.15 0.0031 7.5 411 0.13 0.002
14
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis andtesting, is solely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of theapplication are met.
Process Filtration DivisionBulletin C-7026 Eff. 4/97, Rev. 03/04 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
Twice the Flow and RecirculationRate With Next Generation PTFEMembrane Filter Cartridges
ApplicationsUHP Chemicals Acids Solvents Photoresists Tank Vents Etchants Alkalies
Features and BenefitsSuperior PTFE Membrane YieldsMaximum Filtration Results High flow rates and reduced pressure drops for im-
proved filtration efficiency. Rinsed to 18 megohm-cm resistivity with UHP water. Large, high-purity filtration area for maximum yields. Non-fiber releasing. Narrow pore size distribution ensures the ultimate
in retention and flow rate. Available prewetted for immediate use in process.
Parkers TQM System Assures ConsistentPerformance and Reliable Filtration Strict quality control measures include rigorous testing
for rinse up, shedding, flow rate and extractable levels. Integrity-tested and testable in situ. Thermally welded, eliminating adhesive extractables. Biosafe in accordance with USP Class VI-121C
Plastics Tests. Specifically designed to ensure cleanliness. All materials of construction are FDA listed as
acceptable for potable and edible liquid contactaccording to CFR Title 21.
Mega-Pure Membrane Series
Advantage PFFilter Cartridges
Developers Strippers Recirculation Wet-Etch
Systems Rinse Baths
Process Gases& CompressedAir
PolymerFiltration
Mega-Pure PTFE membrane filter cartridges provideunsurpassed flow rate capability. Parkers PTFE membranecartridge outperforms all competitive cartridges of the samerating at a ratio of 2 to 1 or greater, thus reducing thenumber of cartridges and housings required. PTFEmembrane filter cartridges are a low-cost alternative toall fluoropolymer cartridges. The Mega-Pure PTFEMembrane Series of filter cartridges meets or exceedsrequirements for the filtration of UHP liquids used in thefabrication of state-of-the-art microelectronic devices.
The Mega-Pure PTFE Membrane Series is available in0.05m, 0.1m, 0.2m, 0.45m and 1m pore sizes.
PTFE Membrane
15
Process Filtration Division
Bulletin C-7026Page 2 of 2
Specications
Ordering Information
Mega-Pure Membrane Series
* Trademark of E. I. duPont de Nemours & Co.** Consult Process Filtration Division for gas flow data.*** Available only in 9-5/8 (-9) and 19-5/8 (-19) lengths.1 PFA/Viton is O-Ring only; for DOE (HH), gasket is expanded PTFE.
W
Special PreparationW = Prewetted With Ozonated UHP Water
E
Seal MaterialB = Buna ND = CR 570E = EPRK = KR4079S = SiliconeT = PFA/Viton* 1V = Viton*X = No O-Ring/
No Gaskets
TC
End Cap Configuration
E
GradeE = Electronics
PF
Cartridge CodePF = PTFE
PTFE Cartridges:Flow rate vs. DP for a 1 cpsliquid @ 73F (23C)**
Flow Factors:
Pore Size GPM/ LPM/ PSID/ Bar/(m) 1 PSID 1 Bar 1 GPM 1 LPM
0.05 1.5 82 0.67 0.012 0.1 3.0 164 0.33 0.006 0.2 4.5 247 0.22 0.004 0.45 6.5 356 0.15 0.003 1 7.5 411 0.13 0.002
10
Length (in)10 = 1020 = 2030 = 3040 = 40
B
Diameter (in)B = 2.7
F
Pore Size (m)D = 0.05S = 0.1F = 0.2R = 0.45Q = 1
40 60200 80LPM
0
.1
.2
.3
0
1
2
3
4
5
Dif
fere
nti
al P
ress
ure
PS
I
GPM Flow Rate
BA
R
0 5 10 15 20 25
0.1
m
0.2
m
0.45
m
1m
0.05m
Dimensions: Diameter: 2.7 in (6.8 cm) Lengths: 10-40 in (25-102 cm)
Surface Area (10 in cartridge): Minimum 7.5 ft2 (0.7 m2)
Integrity Test: Bubble Point (100% IPA):
0.05m > 50 psig (3.4 bar)0.1m > 24 psig (1.7 bar)0.2m > 16 psig (1.1 bar)0.45m > 6 psig (0.4 bar)1m > 3 psig (0.2 bar)
Recommended Operating Conditions: Maximum Temperature:
176F (80C) @ 30 DP (2.1 bar) Maximum Differential Pressure:
Forward:70 psi (4.8 bar) @ 77F (25C)30 psi (2.1 bar) @ 176F (80C)
Reverse: 50 psi (3.4 bar) @ 77F (25C)
AR = 020 O-Ring RecessedHH = DOE (Gaskets)LL = 120/120***LR = 120 O-Ring Recessed***PR = 213 O-Ring Recessed***S C = 2-226/FlatSF = 2-226/FinTC = 2-222/FlatTF = 2-222/Fin
Membrane: hydrophobic PTFEMembrane Support/Drainage:polypropyleneStructural Components:polypropyleneSeal Material: variousSealing Method: thermal welding
Materials of Construction:
16
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis andtesting, is solely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of theapplication are met.
Process Filtration Division!Bulletin C-2010 Eff. 8/97, Rev. 03/04
2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
Pleated Series
Fulflo AdvantageFilter Cartridges
Applications
Chemicals Electronic Food & Beverage Magnetic Media Pharmaceuticals Cosmetics Medical Photographic
All-polypropylene media and construction meeta broad range of performance requirements.
One-piece fused construction is 100% bondedfor maximum cartridge integrity.
High surface area design provides superior flowrates and extended service life.
All media and structural components comply withbiological, USP XXI Class VI requirements forplastic and are nontoxic per WI-38 Human CellCytotoxicity Test.
Features and Benefits All materials of construction are FDA listed as
acceptable for potable and edible liquid contactaccording to CFR Title 21.
Fixed pore construction provides ultimate particleretention efficiency.
Major end seal options are available to fit mostvessel requirements.
Advantage cartridges are non-fiber releasing.
Absolute Rated High EfficiencyFrom All-Polypropylene PleatedCartridgesFulflo Advantage Cartridges, made of pleatedpolypropylene microfiber, provide high efficiency andhigh purity filtration. The high submicron efficiency ofthe Advantage line makes it an ideal membraneprefilter or cost-effective alternative to membranecartridges in a wide range of applications.
Advantage Pleated Cartridges are available in0.3m, 0.6m, 1.2m, 2.5m, 5m, 10m, 20m,40m and 70m absolute rated pore sizes(99.99% removal; = 10,000).
Polypropylene
17
Process Filtration Division
025
Particle RemovalRating (m)003 = 0.3006 = 0.6012 = 1.2025 = 2.5050 = 5100 = 10200 = 20400 = 40700 = 70
Notes:1. Clean P is PSI
differential at start.2. Viscosity is centistokes.
Use Conversion Tablesfor other units.
3. Flow Factor is P/GPMat 1 cks for 10 in (or
single).4. Length Factors convert
flow or P from 10 in(single length) to requiredcartridge length.
Advantage Length Factors
Beta Ratio () =
Upstream Particle Count @ Specified Particle Size and Larger
Downstream Particle Count @ Specified Particle Size and Larger
Percent Removal Efficiency = -1 x 100
Performance determined per ASTM F-795-88. Single-Pass Test using AC testdust in water at a flow rate of 3.5 gpm per 10 in (13.2 lpm per 254 mm) cartridge.
Bulletin C-2010Page 2 of 2
Pleated Series
DO
End Cap ConfigurationAR = 020 O-Ring/Recessed (Gelman)DO = Double Open End (DOE)DX = DOE With Core ExtenderL L = 120/120 (Filterite LMO)**L R = 120 O-Ring/Recessed**
(Nuclepore)PR = 213 O-Ring/RecessedSC = 226 O-Ring/CapSF = 226 O-Ring/FinSSC = S.S. Inserted 226 O-Ring/ClosedSSF = S.S. Inserted 226 O-Ring/FinSTC = S.S. Inserted 222 O-Ring/ClosedSTF = S.S. Inserted 226 O-Ring/FinTC = 220 O-Ring/CapTF = 222 O-Ring/Fin
N
Seal MaterialE = EPRN = Buna-NS = SiliconeT = PFA
Encapsulated Viton*1 (O-ring only)V = Viton*X = No Seal Material
10
NominalLength (in)10 = 9 13/1620 = 19 15/1630 = 30 1/1640 = 40
AP
Cartridge CodeAP = AdvantagePolypropylene
R
Special OptionsNo Symbol = No OptionB = 100% Bubble-
Point TestR = Rinse with DI
Water (5 minutes)Z6 = Individual Poly Bag
Only
A
SupportConstructionA = Heavy-Wall PolypropleneX = Coreless
Cartridge
Ordering Information
* A trademark of E. I. duPont de Nemours & Co.1 PFA/Viton is O-Ring; for DOE, T is expanded PTFE gasket.For pleated cartridge configurations and dimensions, see Bulletin A-700 in the Appendix.
SpecificationsFiltration Ratings:
99.99% at 0.3m, 0.6m, 1.2m,2.5m, 5m, 10m, 20m, 40mand 70m pore sizes
Materials of Construction: Type of Construction: integrally sealed,
all-polypropylene pleated media sup-ported by all-polypropylene construction
Filter Media: composite, spunbonded/melt blown continuous polypropylenemicrofiber matrix
Pleat Support Layer (Upstream):polypropylene
Pleat Drainage Layer (Downstream):polypropylene
Media Support Core:high-strength polypropylene
Media Protective Cage:molded polypropylene
Pleat Pack Side Seal:fused polypropylene
DOE Caps: polypropylene SOE Caps/O-Ring Adaptors:
polypropylene
Gaskets (DOE Style): Buna-N,FDA grade (standard)
O-Rings (SOE Style): silicone,FDA grade (standard)
Optional Gasket Materials:(non-FDA): EPR, Viton,* silicone
Optional O-Ring Materials:(non-FDA): EPR, Viton,* Buna-N,PFA encapsulated Viton*
Maximum RecommendedOperating Conditions:
Length Length(in) Factor
10 1.020 2.030 3.040 4.0
Liquid Particle Retention Ratings (m)@ Removal Efficiency of:
=10000 =1000 =100 =50 =20 =10 Cartridge Absolute 99.9% 99% 98% 95% 90%
AP 003 0.3
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis andtesting, is solely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of theapplication are met.
Process Filtration Division!
Bulletin C-2020 Eff. 8/97, Rev. 03/04 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
Unique Cartridge ConstructionImproves Particle Retention,Service Life and Flow Rates
Features and Benefits Premium pleated cellulosic media allow high flow
capacity at low pressure drop.
Available in a variety of cartridge lengths and end cap configurations to fit most industrial vessels.
Phenolic resin impregnated to provide strength, integrity and high contaminant capacity.
Pleated Series
Fulflo PCCFilter Cartridge
App l i ca t i ons Chemical Oil Field Photographic
Film & Paper Metal Treatment Process Water
Synthetic Fibers Recording Media Coatings, Paint, Ink & Resins Petroleum Process Gas
Parker Fulflo Pleated Cellulosic Cartridges meeta broad range of critical filtration applications.Each cartridge in the Fulflo Pleated Cellulosicseries is manufactured with premium grade,phenolic impregnated, cellulosic filter media.Phenolic resin locks the cellulosic fibers into arigid, porous matrix. This structure providessuperior particle removal and particle retentionperformance under the most severe conditions.
Fulflo Pleated Cartridges are available in 2m, 3m,10m, 30m and 60m pore sizes (99%+ removal: = 100).
High flow rates permit the use of smaller vesselsand fewer cartridges.
Lower P reduces power requirements andpump wear and tear.
Longer cartridge life reduces frequency of filterchange out resulting in less disposal costs,reduced inventory and less process interruptions.
Cellulosic/Phenolic
19
Process Filtration Division
Bulletin C-2020Page 2 of 2
Pleated Series
* A trademark of E. I. duPont de Nemours & Co.For pleated cartridge configurations and dimensions, see Bulletin A-700 in the Appendix.
SpecificationsFiltration Ratings: 99%+ at 2m, 3m, 10m,
30m, and 60m pore sizes
Materials of Construction: Phenolic impregnated
cellulosic media (PCC) Polypropylene support Stainless steel support (optional)
PCG is glass-modified cellulose
Stainless Steel Support:Maximum Temperature: 250F (121C)Maximum P: 50 psi (3.5 kg/cm2)Optimum Change Out P: 35 psi(2.5 km/cm2)
Polypropylene Support:Maximum Temperature @ 10 psid(0.7 km/cm2): 200F (93C)Maximum Temperature @ 35 psid(2.5 km/cm2): 125F (52C)Maximum P @ 75F (24C): 60 psi(4.2 kg/cm2)Change Out P: 35 psi(2.5 km/cm2)
Liquid Particle Retention Ratings (m) @ Removal Efficiency of:
PCC / PCG Length Factors
Length Length(in) Factor
9 1.010 1.019 2.020 2.029 3.030 3.040 4.0
PCC / PCG Flow Factors (psid/gpm @ 1 cks)
Rating Flow (m) Factor
2 0.026 3 0.01710 0.00230 0.00160 0.0005
Notes:1. Clean P is PSI differential at start.2. Viscosity is centistokes. Use Conversion
Tables for other units.3. Flow Factor is P/GPM at 1 cks for 10 in
(or single).4. Length Factors convert flow or P from 10 in
(single length) to required cartridge length.
Flow Rate and Pressure Drop Formulas:
Flow Rate (gpm) = Clean P x Length Factor Viscosity x Flow Factor
Clean P = Flow Rate x Viscosity x Flow Factor Length Factor
( )Beta Ratio () = Upstream Particle Count @ Specified Particle Size and Larger
Downstream Particle Count @ Specified Particle Size and Larger
Percent Removal Efficiency = - 1 x 100
Performance determined per ASTM F-795-88. Single-Pass Test using AC test dust in water at aflow rate of 2.5 gpm per 10 in (9.5 lpm per 254 mm).
**Available only in 9-5/8 (-9) and 19-5/8 (-19) lengths
7.0 9.5 17.0 50.0100.0
=5000 =1000 =100 =50 =20 =10 Cartridge Absolute 99.9% 99% 98% 95% 90%
PCG 020PCC 3PCC 10PCC 30PCC 60
101222
100150
1.8 3.0 5.511.030.0
0.9 1.7 3.0 5.515.0
0.3 0.6 1.0 1.5 5.0
0.1 0.2 0.3 0.5 2.0
PCC Particle Removal Efficiency Over Life
Ordering InformationN
Seal MaterialA = Poly Foam
(DOE Gasket Only)E = EPRN = Buna-NS = SiliconeV = Viton*
TC
End Cap ConfigurationsAR = 020 O-Ring/Recessed
(Gelman)DO = Double-Open-End (DOE)DX = DOE With Core ExtenderLL = 120/120 (Filterite LMO and Nuclepore Polymeric Vessels)**LR = 120 O-Ring/Recessed
(Nuclepore)**
PCG020
Cartridge Code (m)PCG020 2PCC3 3PCC10 10PCC30 30PCC60 60
10
Nominal Length(code) (in) (mm) 9 9-5/8 24410 9-13/16 24919 19-5/8 49820 19-15/16 50629 29-1/4 74330 30-1/16 76440 40 1016
A
Support ConstructionA = Polypropylene
(DOE/SOE)G = 304 Stainless Steel (DOE)
OB = Std. Open End/PolyproSpring Closed End
PR = 213 O-Ring/Recessed(Ametek and ParkerLT Polymeric Vessels)**
SC = 226 O-Ring/CapSF = 226 O-Ring/FinT C = 222 O-Ring/CapT F = 222 O-Ring/FinTX = 222 O-Ring/Flex FinXB = Ex. Core Open End/Poly-
pro Spring Closed End
=
=
=
=
=
=
=
Recommended Operating Conditions: Maximum 10 gpm per 10 in length (38 lpm/254 mm)
Bet
a R
atio
( )
% R
emo
val E
ffic
ien
cy
Particle Size (m)
20
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or systemin the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, issolely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker HannifinCorporation and its subsidiaries at any time without notice.
Bulletin C-2030 Eff. 03/03 2001 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2
High Efficiency, Flow Rate, DirtHolding Capacity & HighPressure Pleated CartridgesParker's Fulflo 1401 cartridges are designed toreplace similar competitive cartridges in highpressure water injection & disposal, gas streamsand fluid processing. The cartridges are availablein cellulosic and polypropylene media. Fulflo1401's are available in absolute ratings of 2.5, 6,10, 12, 22, and 100 microns ( = 5000, 99.98%)
Features and Benefits Retrofits into compatible housing that use 1401 style cartridges
Maximize surface area to prevent particle bridging.
High filtration efficiency
Process Filtration Division
Pleated Series
Fulflo 1401, High PressureFilter Cartridge
Applications Water Injection Solvents Acids Chemicals Hydrocarbons Water
Low pressure drops
High flow rates
Internal o-ring seal for positive sealing
Rugged construction
21
PPC005 -1401PPC010 -1401PPC020 -1401PCG020 1401PCC3 - 1401PCC10 - 1401PCC30 - 1401
Bulletin C-2030Page 2 of 2
Pleated Series
Process Filtration Division
Specifications
Beta Ratio () = Upstream Particle Count @ Specified Particle Size and LargerDownstream Particle Count @ Specified Particle Size and Larger
Percent Removal Efficiency = -1 x 100
Performance determined per ASTM F-795-88. single-pass test using AC testdust in water.
( )
Filtration Ratings: 99.98% at 2.5m, 6m, 10m, 12m, 22m, and 100m pore sizes
Materials of Construction:Filter media;
Operating Conditions:
3 3/4" OD x 2 1/8" ID x 38-3/4"longDimensions:
Pressure rating - 150 PSID Temperature Rating - 275OF Recommended flow rate - 75 GPM Change out P - 35 PSID
Liquid Particle Retention Ratings (m)@ Removal Efficiency of:
2.56
10101222
100
2.84.8
88.6101885
0.51.2
51.8
36
11
WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSEDEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigationby users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the currentproduct catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible formaking the final selection for the products and systems and assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporationand its subsidiaries at any time without notice.
Bulletin C-2040 Eff. 11/99, Rev. 03/04 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 4
Quality, Economical Filtrationfor Critical Process ApplicationsParkers Poly-Mate Cartridges incorporate aunique combination of polypropylene melt blownand spunbonded media to provide high surfacearea, finish-free and non-fiber releasing filtration.All-polypropylene construction maximizes chemicalresistance to acids, bases, salts, and most organicsolvents.
Poly-Mate Pleated Cartridges are available in0.5m, 1m, 5m, 10m, 30m, and 60m poresizes (99% removal; = 100).
Process Filtration Division
Pleated Series
Fulflo Poly-MateFilter Cartridges
Applications Food & Beverage Photographic High-Technology
Coatings Deionized Water R.O. Membrane
Prefiltration
Disposal Wells Process Water Fine Chemicals Wastewater Plating Chemicals
Poly-Mate Xtra Duty cartridges are availablewith backwashable construction, reducingreplacement maintenance and cartridgedisposal costs. See page 4 for procedure.
All materials of construction are FDA listed asacceptable for potable and edible liquidcontact according to CFR Title 21.
One piece, continuous to 40 in length,integrally sealed pleated filter media.
Polypropylene
High efficiency rated for critical process applications(99% efficiency).
High pleated surface area for extended servicelife, low pressure drop and high flow capacity.
Poly-Mate Xtra Duty (PXD) cartridge featuresglass-filled polypropylene core for high temperatureand high pressure use with rigid outer cagesupporting pleated media in backwash applications.
Optional stainless steel O-ring adapter insertsprovide added strength for in situ sterilization.
Features and Benefits
23
Bulletin C-2040Page 2 of 4
The Filters of Choice for . . .
SpecificationsFiltration Ratings: 99% at 0.5m, 1m, 5m, 10m,
30m, and 60m pore sizes
Effective Filtration Area: Up to 6.0 ft2/10 in (0.6m2/254mm)
Materials of Construction: Filter Media and Support Layers:
polypropylene
Bonding Polymer: none, completelyfusion-sealed
Surface Treatment: none (fusion-sealed), chemically inert and neutral
Media Protection:PM - polypropylene nettingPXD - polypropylene cage
Support Core:PM - polypropylenePXD - glass-filled polypropylene
Pleat Pack Side Seal:fused polypropylene
End Caps: polypropylene Seals: Buna-N, EPR, silicone,
Viton,* PFA encapsulated Viton*O-rings, polyethylene foam gaskets
Recommended Operating Conditions: Poly-Mate Cartridges:
Change Out P: 35 psid (2.4 bar)Maximum Temperature: 200F (93C)Maximum Temperature @ 35 psid(2.4 bar): 125F (52C)Maximum P @ 70F (21C):60 psid (4.1 bar)Maximum P @ 200F (93C):10 psid (0.7 bar)
Poly-Mate Xtra-Duty Cartridges:Change Out P: 35 psid (2.4 bar)Maximum Temperature: 200F (93C)Maximum Temperature @ 35 psid(2.4 bar): 200F (93C)Maximum P @ 70F (21C):
90 psid (6.1 bar)Maximum P @ 200F (93C):35 psid (2.4 bar)
Dimensions: Overall Length: See bulletin A-700.
SOE fits standard vessels with O-ring receptacles.
Cartridge Outside Diameter:2-1/2 in (63.5 mm)
Cartridge Inside Diameter:DOE - 1-1/16 in (27 mm);SOE - 1 in (25.4 mm)
Recommended Maximum Flow Rate: Maximum 10 gpm per 10 in length
Designed Flow Rate (in water): 2.5 gpm per 10 in length
(9.5 lpm per 254 mm)
* A trademark of E. I. duPont de Nemours & Co.
Pleated Series
Foods and BeveragesFoods and beverages must befiltered with products made fromcomponents complying with FDAregulations for food contact use.Extraction of binders, chemicaladditives and media fragmentsinto foods and beverages isunacceptable. Poly-Matecartridges are thermally bondedand meet all FDA requiredstandards. In many applications,PolyMate cartridges are amore cost-effective alternativeto melt blown and spunbondeddepth cartridges.
High Technology CoatingsHigh tech coatings used on magnetictape, floppy discs, lenses and opticalfibers require filtration with productsthat capture agglomerates and largecontaminants with high efficiencywhile allowing the smaller c
Top Related