Parker Products Filtration Process-L

Filtration SystemsProductsProcess Filtration Division

Filtration andSeparation Division242 Neck RoadP.O. Box 8223Haverhill, MA 01835-0723Phone: (800) 343-4048Fax: (978) 858-0625

Hydraulic Filter DivisionNorth America16810 Fulton County Road #2Metamora, OH 43540Phone: (419) 644-4311Fax: (419) 644-6205

Process Filtration Division6640 Intech BoulevardIndianapolis, IN 46278Toll Free: (888) 238-5356Phone: (317) 275-8300Fax: (317) 275-8410

Racor Division3400 Finch RoadP.O. Box 3208Modesto, CA 95353Phone: (800) 344-3286Phone: ((209) 521-7860Fax: (209) 529-3278

Racor DivisionHydrocarbon ProductsRoute #3 Box 9Henryetta, OK 74437Phone: (918) 652-4481Fax: (918) 652-8882

Hydraulic Filter DivisionEuropeChurwell ValeShaw Cross Business ParkDewsbury, England WF 12 7RDPhone: (44) 192 448 7000Fax: (44) 192 448 7001

Hydraulic Filter DivisionEuropeUCC ProductsP.O. Box 3Thetford, NorfolkIP24 3RT EnglandPh: (44) 1842-754251Fax: (44) 1842-753702

Finn Filter DivisionFin-31700Urjala As., FinlandPhone: (358) 3 54 100Fax: (358) 3 54 10100

Parker Hannifin Ind. e Com.Ltda. Filter DivisionVia Anhanguera, Km.25,305276-000 - Sao Paulo SP, BrazilPhone: (55) 11-3917-1222Fax: (55) 11-3917-1610

Parker Hannifin Korea Limited902 Dae Heung Bldg.648-23 Yeoksam-dongKangnam-ku, Seoul,Korea 135-080Tel: 82 2 561 0410Fax: 82 2 556 8187

Filtration Group TechnicalSales & Service Locations

Parker Hannifin CorporationProcess Filtration Division6640 Intech BoulevardIndianapolis, Indiana 46278Toll Free 1-888-C-FULFLO (238-5356)Telephone (317) 275-8300Fax (317) 275-8410http://www.parker.com

Parker WorldwideSales OfficesContact Parkers worldwide Serviceand distribution network by calling:

Argentina - +54 (1) 752 4129Australia - +61 (2) 634 7777Austria - +43 (2622) 23501 5Belgium - +32 (2) 762 1800Brazil - +55 (11) 847 1222Canada - 1-800-272-7537China - +86 (21) 6445 9339Chile - +(562) 623-1216Czech Republic - +42 613 41701Denmark - +45 (43) 541133Finland - +358 (3) 54 100France - +33 (4) 50 258025Germany - +49 (3727) 90991Hong Kong - +852 2428 8008Hungary - +36 (1) 25 22 539India - +91 (22) 577 1671Italy - +39 (2) 451921Japan - +81 (45) 861 3811Korea - +82 (2) 561 0414Mexico - 1-800-272-7537Netherlands - +31 (541) 585000New Zealand - +64 (9) 573 1523Norway - +(47) 64 86 77 60Poland - +48 (22) 8634942Singapore - +65 261 5233South Africa - +27 (11) 3927280Spain - +34 (1) 6757300Sweeden - +46 (8) 760 2960Taiwan - +886 (2) 8787 3780United Arab Emirates - =971 (2) 788587United Kingdom - +44 1442 238100United States of America - 1-800-272-7537Venezuela - +58 (2) 238 5422

n~

Lenntech [email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89

The Parker HannifinFiltration Group Assures:

Consistent qualityTechnical innovationPremier customer service

Parkers technical resources provide theright filtration technologies that comformto your requirements. Thats why thous-ands of manufacturers and equipmentusers around the world rely on Parker Fil-tration products and people.

Worldwide Salesand Service

WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBEDHEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/orsystem options for further investigation by users having technical expertise. It is important that you analyze all aspects of your applicationand review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions andapplications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the finalselection for the products and systems and assuring that all performance, safety and warning requirements of the application are met.

Parker operates sales and service cen-ters in major industrial areas worldwide.Call 1-800-C-PARKER for more informa-tion and for a synopsis of our FiltrationTechnology Textbook.

Hydraulic, Lubrication& Coolant FiltrationHigh-performance filtrationsystems for production ma-chinery in industrial, mobileand military/marine.

Compressed Air &Gas FiltrationComplete line of compressedair/gas filtration products;coalescing, particulate andadsorption filters in many ap-plications in many industries.

Process & ChemicalFluid FiltrationLiquid filtration systems forbeverage, chemical and foodprocessing; cosmetic, paint,water treatment; photo-pro-cessing; and micro-chip fab-rication.

Fuel Conditioning& FiltrationParker air, fuel and oil filtra-tion systems provide qualityprotection for engines oper-ating in any environment,anywhere in the world.

Legal NotificationsWARNING

Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorizeddistributors. This offer and its acceptance are governed by the provisions stated in the Offer of Sale.

Copyright 1997, Parker Hannifin Corporation, All Rights Reserved

About Parker Hannifin CorporationParker Hannifin is a leading global motion-control company dedicated to delivering pre-mier customer service. A Fortune 200Corporation, we are listed on the New YorkStock Exchange with PH as our symbol. Ourcomponents and systems comprise over1,000 product lines that control motion in awide spectrum of essential uses in some1,200 industrial and aerospace markets. OurCompany has the largest distribution net-work in its field, with over 6,000 distributorsserving more than 300,000 customers world-wide.

Parkers CharterTo be a leading worldwide manufacturer ofcomponents and systems for the builders andusers of durable goods. We will achieve prof-itable growth through premier customer ser-vice.

Parker Hannifin Corporation

Aerospace Group is a leaderin the developement, design,manufacture and servicing of hy-draulic and fuel control systemsand components for aerospaceand related high technology mar-kets

Climate and IndustrialControl Group is a leadingsupplier of flow control and fluidhandling components, gerotors,and of systems support to world-wide refrigeration, air condition-ing and automotive customers.

Filtration Group is a leadingworldwide manufacturer and mar-keter of quality filtration and clarifi-cation products.

Automation Group designs,produces, and markets the fullspectrum of components and sys-tems to provide force, motion & con-trol for industrial, mobile, marineand energy related machinery andequiment.

Fluid Connectors Groupdesigns, manufactures and mar-kets hose, fittings, flexible connec-tors, instrumentation products andassociated components used influid systems

Seal Group designs, manufac-tures and distributes industrial andcommercial sealing devices andrelated products by providing su-perior quality and emphasizing to-tal customer satisfaction in each ofits markets.

Hydraulics Group is an indus-try leader in the design, production,and marketing of a full spectrum ofquality hydraulic components andsystems to provide force and mo-tion and control for industrial, mo-bile, marine, and energy-relatedmachinery and equipment.

Instrumentation Group isdedicated to being a global leaderin the design, manufacture and dis-tribution of high quality, critical flow,and ultra high purity componentsfor a broad spectrum of markets.


Effective 8/97 Revised 08/02 1997 Parker Hannifin CorporationAll Rights ReservedPage 1 of 1

Process Filtration Division

Introduction

Foreword

We are pleased to provide the following edition of theParker Hannifin Corporation, Process Filtration Division,catalog. The information contained in this manual is for theuse of Parker Hannifin Corporation, Process FiltrationDivision, distributors and their customers in the selectionand specification of Process Filtration Division vesselsand media.

In order to keep this catalog complete and correct, we willperiodically send revised catalogs with updated materials.

Please fill out the card below to receive updated catalogsand send it to:

Company Name:Your Name:

Position:

Address:City, State, Zip:Telephone:Catalog # (see front cover):

i


Effective 8/97 Revised 03/04 2002 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2


Table of Contents

Page

iii

C-8500 Fulflo TruBind 300 Series CartridgesC-8510 Fulflo TruBind 400 Series CartridgesC-8520 Fulflo TruBindTM 700 Series CartridgesC-8530 Fulflo Activated Carbon Cartridges

Sorbent Cartridge SeriesPolymeric MediaPolymeric MediaPolymeric MediaActivated Carbon

NEW

NEW

ForewordTable of ContentsIntroduction/Customer Support InformationProduct Line Overview

C-7010 Advantage AF Filter Cartridges (Mega-Pure)C-7011 Advantage AF+ Filter Cartridges (Mega-Pure)C-7012 Advantage PS Filter Cartridges (Ultra-Pure)C-7014 Advantage PS Filter Cartridges (Mega-Pure)C-7017 Advantage PS Filter Cartridges (General Grade)C-7018 Evadur Filter CartridgeC-7025 Advantage PF Filter Cartridges (Ultra-Pure)C-7026 Advantage PF Filter Cartridges (Mega-Pure)Pleated Filter Cartridge Series

Fulflo AdvantageTM AP Filter CartridgesFulflo PCC Filter CartridgesFulflo 1401 High Pressure Filter CartridgesFulflo Poly-Mate PM/PXD Filter CartridgesFulflo Glass-Mate PMG Filter CartridgesFulflo Poly-Mate Plus PMP Filter CartridgesFulflo Abso-Mate PAB Filter CartridgesFulflo Slurry-Mate SMC Filter CartridgesFulflo MegaFlow+TM MFA Filter CartridgesFulflo MegaFlowTM MFN Filter CartridgesFulflo 336 Pleated CartridgesFulflo Flo-Pac FP Filter CartridgesFulflo Flo-Pac+ FPE Filter Cartridges

Wound Depth, Resin Bonded and Melt Blown Filter Cartridge SeriesC-1000 Fulflo HoneycombTM HFT Filter CartridgesC-1030 Fulflo XTL Filter CartridgesC-1060 Fulflo SWC Filter CartridgesC-1301 Fulflo MegaBond Plus MBP Filter CartridgesC-1307 Fulflo DuraBond DBC Filter CartridgesC-1320 Fulflo EcoBond EBC Filter CartridgesC-1321 Avasan AVS Filter CartridgeC-1620 Fulflo ProBond PRO Filter CartridgesFilter Bag Media and Strainer Series

All FluoropolymerAll FluoropolymerPolyethersulfonePolyethersulfonePolyethersulfonePolyethersulfonePTFEPTFE

Micron Ratings 0.05 to 1Micron Ratings 2 to 60Micron Ratings 0.1 to 0.65Micron Ratings 0.03 to 0.45Micron Ratings 0.03 to 0.65Micron Ratings 0.03 to 0.65Micron Ratings 0.1 to 1Micron Ratings 0.05 to 1

PolypropyleneCellulosicCellulosic and PolypropylenePolypropyleneMicrofiberglassPolypropylenePolypropylenePolypropyleneCellulosic and PolypropyleneCellulosic and PolypropyleneCellulosic and PolypropyleneCellulosicCellulosic

Micron Ratings 0.3 to 70Micron Ratings 2 to 60Micron Ratings 2 to 100Micron Ratings 0.5 to 60Micron Ratings 0.45 to 40Micron Ratings 0.25 to 100Micron Ratings 0.2 to 70Classification Codes 02 to 16Micron Ratings 1 to 70Micron Ratings 0.5 to 10Micron Ratings 3 to 100Micron Ratings 0.5 to 60Micron Ratings 0.5 to 60

Micron Ratings 0.5 to 150Micron Ratings 1 to 30Micron Ratings 1 to 100Micron Ratings 1 to 120Micron Ratings 1 to 100Micron Ratings 1 to 50Micron Ratings 1 to 75Micron Ratings 2 to 125

Various FibersCotton and PolypropyleneCotton and PolypropylenePolypropylenePolyolefinPoypropylenePoypropylenePhenolic Resin/Acrylic Fiber

316 Stainless Steel316 Stainless SteelVarious Fibers

C-1069 Fulflo Basket StrainersC-1070 Fulflo Coaxial Retainer BasketC-5030 Fulflo Filter Bags

20 to 100 MeshUse with Size #2 mesh & felt mediaMicron Ratings 0.5 to 800

C-2010C-2020C-2030C-2040C-2041C-2044C-2047C-2048C-2051C-2055C-2060C-4015C-4016

13579

111315

17192123273133373941434547

4953555759616365

676971

73757779

iiiiv

vii

IntroductionIntroduction

Membrane Filter Cartridge Series

of 2

Fulflo WH Filter VesselsFulflo WY Filter VesselsFulflo FH5 Filter VesselsFulflo FH7 & 12 Filter VesselsFulflo SF Filter VesselsFulflo HT Filter VesselsFulflo S Filter VesselsFulflo MP Filter VesselsFulflo MegaFlow MP Filter VesselsFulflo FE Filter VesselsFulflo FP Filter VesselsFulflo FPM Oil Filter VesselsFulflo P Filter Vessels

C-3006C-3010C-3020C-3025C-3060C-3065C-3070C-3075C-3076C-3140C-3160C-4020C-4030

Multi-Cartridge Filter Vessel Series

C-3000C-3001C-3002C-3003C-3004C-3005C-3050C-3052C-3055

Fulflo "B" Series Filter VesselsFulflo "B" Series Filter VesselsFulflo High Pressure Filter VesselsFulflo FB Oil Burner Filter AssemblyFulflo SSTC Filter VesselsFulflo "M" Series Filter VesselsFulflo LT Filter VesselsAdvantage PFA Filter VesselsFulflo NP Filter Vessels

Single Cartridge Filter Vessel SeriesFulflo Metallic Filter Cartridges Pleated & Cylindrical 304SS & 316 SS Micron Ratings 2 to 840

Metallic Media SeriesC-9000

Page

Carbon Steel Brass & Stainless Steel Carbon & Stainless Steel Steel 316 Stainless Steel Carbon & Stainless Steel SAN/Polypropylene PFA Natural Polypropylene

304 and 316L Stainless Iron, Carbon & Stainless Carbon, 304 & 316 Stainless 304 & 316L Stainless Carbon, 304, 316 Stainless Carbon Steel Carbon, 304, 316 Stainless 304L & 316L Stainless Carbon, 304L & 316L Stainless Carbon, 304L & 316L Stainless Carbon & 304L Stainless Steel Carbon Steel

High Temperature

Horizontal & Vertical Horizontal & Vertical

838587899193959799

101103105107109111113115119121123125

C-7034 Advantage PS Sanitary Vessels

C-4022

A-700A-705A-710A-730A-735A-740A-750A-770A-800A-1100A-1100APD 4099

Pleated Cartridge Configurations GuideStandard Screen Micrometer Conversion ChartFulflo Micrometer Rating MatrixFlow Rate/Dirt Loading ChartVessel Pressure DropMeasurement Conversion TablesViscosity Conversion TableMaterials Selection Guide for Gas and Liquid FiltersGlossary of Filtration TerminologyFilter Application Specification SheetFilter Application Specification Sheet AddendumOffer of Sale

Appendix

Fulflo SB Filter VesselsFulflo FCB Filter VesselsFulflo FB Filter VesselsFulflo GB Filter VesselsFulflo CB Filter Vessels

C-5000C-5001C-5002C-5004C-5006

Bag Filter Vessel Series 316L Stainless

Fulflo PC Portable Cart Filtration System Series

Carbon, 304 & 316 Stainless Carbon & 304 Stainless Carbon, 304L & 316L Stainless Carbon, 304L & 316L Stainless Carbon & 304 Stainless

131

133

135

137

139

127

129

141

143

145

147

149

151

153

155

157

179

183

185

187

81


Effective 8/97 Rev. 08/02 1997 Parker Hannifin CorporationAll Rights ReservedPage 1 of 1


Introduction

Introduction/CustomerSupport Information

Introduction

Parker Hannifin Corporation is comprised of eight globaloperating groups: Filtration, Climate and Industrial Controls,Aerospace, Hydraulics, Instrumentation, Automation, FluidConnectors and Seal.

The Filtration group consists of ten filtration technical salesand service locations, including the Process Filtration Divi-sion, Filtration & Separation Division, Hydraulic Filter Divi-sion, Racor Division, Filter Division Europe, Finn Filter Divi-sion, and Parker Hannifin, Brazil and Parker Hannifin KoreaLimited.

Customer Support Information

Meeting Your Exact Filter NeedsParker knows the importance of selecting the right filtrationsystem for optimum effectiveness and efficiency. Our computer-aided product selection systems help you find the right filter foreach application. Evaluating size, flow, efficiency, media and othervariables will take the guesswork out of the process. Thisprovides maximum value for each application: as fine asnecessary rather than as fine as possible.

Technical Support You Can Count OnParkers technical resources assure you of the right filtrationtechnologies, advanced designs, consistent manufacturing and anetwork of helpful, specialized professionals trained tosupport your team.

We listen to you. Then we design the right filtration system. Parkerholds over 150 patents on innovative filtration products, includingfiltration membranes, differential pressure indicators, separators,cartridge bypass valves and spin-on/spin-ins.

Parker Filtration makes the technological investments needed toassure the highest quality products. Examples are moderncleanrooms, sophisticated testing systems such as E.S.M., CAD/CAM engineering, CNC integrated equipment and an extensivecomputer database (inPHorm) that is helping us developtomorrows filtration products today.

Quality Is Top Priority at ParkerParker Filtration has had a Total Quality Management System inplace for years, as well as a Director of Corporate Quality for all ofParker. This structure helps us continually meet our customersexpectations for the highest technical standards, reliable supply andresponsive service. From the Group President on down,Quality at Parker Filtration means more than making a product theright way. Quality permeates our whole organization so that everyemployee thinks about what he or she does and what is expected byour customers.

Always at Our Customers ServiceParker filtration distributors provide local stock and technicaldesign help including 24-hour emergency service. And they arefurther supported by our ever ready manufacturing teams. Weservice a variety of filtration applications and have qualityreplacement elements for competitive products.

So if you need more technical literature or applicationssupport, please call 1-800-C-Parker for the name andlocation of the nearest distributor.

For additional manuals or to request sales support ortechnical materials, contact the Process Filtration Divisionmarketing department at (317)-275-8300.

And remember, the applications information containedin this catalog is general in nature. For technical applicationsassistance and problem solving, contact the Process FiltrationDivision engineering department at (317) 275-8300 or call1-888-C-FULFLO.

For more printed technical information, ask for our texttitled Filtration Technology or our filtration selectionsoftware package, inPHorm.

v

Effective 8/97, Revised 03/03 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 1


Introduction

Product Line Overview

An Innovator in FiltrationTechnology

Parker manufactures a wide variety of filtration products.These products, including both vessels and replaceablemedia, are used extensively in the beverage, chemicalprocessing, cosmetic, food processing, metalworking,paint, ink, pharmaceutical and photo-processingindustries. Theyre also used for prefiltration of feedwater in reverse-osmosis water treatment plants. Severalof these products are "Certified to ANSI/NSF 61" standardfor contact with drinking water components.

In microfiltration, Parker is pioneering breakthroughs formicro-chip fabricators. Our systems improve yields bydelivering ultra-pure chemicals and water filtered to thelimits of detection.

When you need process fluid filters to remove contamina-tion, such as gels or grit, Parker can deliver. In suchapplications as oil and gas exploration/productionprocessing or removal of wastes and byproducts,Parker filters remove particles from 0.03 to 840 microns.

Our process filtration capabilities also include suchapplications as adhesives, resins, water, paints, edibleoils, photographic chemicals and magnetic coatings.Advanced technology, ultra-pure, chemically inert filtrationapplications include electronic components, pharmaceuti-cals, beverages and reverse-osmosis membraneprefiltration protection.

Parkers broad filter line includes membrane cartridges,pleated cartridges, vessels (ASME code and non-code),high-efficiency filter bags, melt blown cartridges, stainlesssteel media and more. Our filter media provide a widerange of micron removal choices from 0.03 to 840microns, with efficiencies as high as 99.99+ percent.

Further, Parkers leadership in ultra-pure microprocessfiltration is recognized by a growing number of customers.We contribute to improved yields by helping to deliverultra-pure chemicals and water to the wafer surface.

Finally, Parker bag media and bonded media (ProBond)are available for high-viscosity applications such as theremoval of oversize particles in paints and inks. Thewound cartridge (HFT or XTL) is an economical choicefor general clarification operations on a wide variety ofliquids from water to corrosive liquids to organic liquids.Wound cartridges, bag media and pleated products thatmeet FDA requirements are available for food contactservice such as potable water, edible oils, soft drinks, beerand corn syrup.

Membrane CartridgesParkers line of membrane cartridges is ideal for criticalapplications when high performance is necessary. Theyare available in two types of media: polyethersulfone, andPTFE fluoropolymer.

Pleated Polypropylene CartridgesPleated polypropylene filter elements, such as ourbackwashable Poly-Mate cartridge used in beer filtrationand similar applications, provide better filtration value.

Resin Bonded CartridgesParkers ProBond cartridges provide two-stage filtration inan innovative one-piece filter. The outer layer of ProBondacts as a prefilter trapping large particles, while the insidelayer provides final filtration. The ProBond is available inparticle removal ratings from 2 to 150 microns.

Melt Blown CartridgesProcess Filtrations MegaBond Plus Cartridges areabsolute-rated depth media that offer consistent produc-tion yields and quality due to fixed pore structure and finerremoval ratings for use in a wide variety of applications.

VesselsParker ASME code and non-code filter vessels areavailable in a variety of configurations for a broad range ofliquid, compressed air and gas applications.

vii

WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigationby users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the currentproduct catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsiblefor making the final selection for the products and systems and assuring that all performance, safety and warning requirements of the application are met.


Mega-Pure Membrane Series

Advantage AFFilter Cartridges

Applications

UHP Water Ozonated Cold Hot

UHP Chemicals Acids Solvents Photoresists Alkalies Developers

Mixed Acids StrippersEquipment Point-of-Use Tools Chemical Delivery

System Cleaning Etching Photolithography Wet Benches

Increased Flow Rate With NextGeneration, All FluoropolymerMembrane Filter CartridgesA unique PTFE membrane provides superior flow rateand efficiency maximizing the performance of thefluoropolymer AdvantageTM AF filter cartridge. The Ad-vantage Mega-Pure AF Series of filter cartridgesmeets or exceeds the requirements of the filtration ofUHP liquids used in the fabrication of state-of-the-artmicroelectronic devices.

The Mega-Pure Advantage AF Membrane Series isavailable in 0.05m, 0.1m, 0.2m, 0.45m and 1mpore sizes.

Superior PTFE Membrane YieldsMaximum Filtration Results

Features and Benefits Parkers TQM System Assures ConsistentPerformance and Reliable Filtration

Strict quality control measures include rigoroustesting for rinse up, shedding, flow rate andextractable levels.Integrity-tested and testable in situThermally welded, eliminating adhesive extractables.Biosafe in accordance with USP Class VI-121CPlastics Tests.Specifically designed to ensure cleanliness.All materials of construction are FDA listed asacceptable for potable and edible liquid contactaccording to CFR Title 21.

Unique PTFE membrane ensures high flow rates andsuperior retention.

Rinsed to 18 megohm-cm resistivity with pulsed,ozonated, UHP water.

Available prewetted for immediate use in process.

Advantage AF cartridges are non-fiber releasingand superior in extractable levels.

Engineered for high temperature resistance.

Bulletin C-7010 Eff. 4/97, Rev. 03/042000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2

PTFE Membrane PTFE Membrane PTFE Membrane PTFE Membrane PTFE Membrane

1


End Cap ConfigurationBC =

DC =

HH =SC =TC =

TC

Flow Factors (10 in cartridge):

Pore Size GPM/ LPM/ PSID/ Bar/(m) 1 PSID 1 Bar 1 GPM 1 LPM


Ordering Information

PTFE Cartridges (4 in):Flow rate vs. P for a 1 cpsliquid @ 73F (23C)**



Bulletin C-7010Page 2 of 2

* A trademark of E. I. duPont de Nemours & Co.

** Consult factory for gas flow data.

Flow Advantages Advantage AF cartridges offer greater

flow rate while decreasing processing timeand increasing recirculation, fluid cleanli-ness, yields and capacity.

Maintaining the current flow rate whilelowering the differential pressure allowsAdvantage AF cartridges to achieve longer lifeand lower particle counts.

Maintaining the current flow rate anddifferential pressure with Advantage AFcartridges allows the use of smaller filterhousings with smaller footprint.

Maintaining the current flow rate anddifferential pressure with lower micron-rated Advantage AF cartridges improvesyields and provides cleaner fluids.

SpecificationsMaterials of Construction:

Surface Area (10 in cartridge): Minimum 6.5 ft2 (0.9 m2)

Integrity Test: Bubble Point (Using N2 and a

membrane wet with 100% IPA at73F [23C]):

0.05m: > 50 psi (3.4 bar)0.1m: > 24 psi (1.7 bar)0.2m: > 16 psi (1.1 bar)0.45m: > 6 psi (0.4 bar)1m: > 3 psi (0.2 bar)

Outside Diameter: 2.5 in (63.5 mm)Inside Diameter 0.825 in (22.2 mm)Lengths: 2-30 in (10-76 cm)

Membrane: hydrophobic PTFEMembrane Support/Drainage: PFAStructural Components: PFASeal Material: variousSealing Method: thermal welding

Dimensions:

LPM

0.1

m

0.2

m

40 60200 80LPM

0

.1

.2

.3

0

1

2

3

4

5

Dif

fere

nti

al P

ress

ure

PS

I

GPM Flow Rate

BA

R

0 5 10 15 20 25

0.05m

0.1

m

0.2

m

0.45m

1m

403010 200 50

0

.1

.2

.3

0

1

2

3

4

5

Dif

fere

nti

al P

ress

ure

PS

I

GPM Flow Rate

BA

R

0 3 6 9 12 15

0.05m

0.45m

1m

T

Seal MaterialD = CR 570E = EPDMK = KR 4079T = PFA/Viton* (O-ring) PTFE (gasket)V = Viton*X = No O-Ring

AF

Cartridge CodeAF = All

Fluoro- polymer

D

Pore Size (m)D = 0.05S = 0.1F = 0.2R = 0.45Q = 1

10

Length (in)02 = 204 = 410 = 1020 = 2030 = 30

A

Diameter (in)A = 2.5 015 O-Ring/Flat

(4 in only)116 O-Ring/Flat

(4 in only)DOE226 O-Ring/Flat222 O-Ring/Flat

0.05 1.5 82 0.67 0.012 0.1 2.5 137 0.40 0.007 0.2 3.5 192 0.30 0.005 0.45 5.0 274 0.20 0.004 1 6.0 329 0.17 0.003

0.05 0.6 33 1.7 0.0310.1 1.0 55 1.0 0.0180.2 1.5 82 0.7 0.0130.45 2.0 110 0.5 0.0091 2.4 132 0.4 0.007


2

W

Special PreparationW = Prewetted With Ozonated UHP Water

Recommended Operating Conditions: Maximum Temperature:

302F (150C) at 20 P (1.4 bar) Maximum Differential Pressure:

Forward:70 psi (4.8 bar) at 77F (25C)30 psi (2.1 bar) at 315F (157C)

Reverse:50 psi (3.4 bar) at 77F (25C)

Quality Standard Each cartridge is flushed with pulsed

UHP ozonated water and monitoreddownstream for TOC and particle count.

The release criteria are no TOCcontribution (ppb) and less than 4particles/ml at the rating or greater for15 minutes.

Each lot of cartridges is evaluated formetallic ion contribution in 10% HNO3after a 24-hour static soak.

Total metals contribution cannot exceed25 ppb.


WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis andtesting, is solely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of theapplication are met.

Process Filtration Division!Bulletin C-7011 Eff. 4/97, Rev. 03/04

2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2

Maximized Flow Rate With NextGeneration All FluoropolymerMembrane Filter Cartridges

A unique PTFE membrane provides superior flow rate,surface area and efficiency maximizing theperformance of the all fluoropolymer AdvantageAF+ membrane filter cartridge. The Mega-PureAdvantage AF+ Series of filter cartridges meets orexceeds the requirements for the filtration of UHPliquids used in the fabrication of state-of-the-artmicroelectronic devices.

The Mega-Pure Advantage AF+ Membrane Seriesis available in 0.05m, 0.1m, 0.2m, 0.45m and1m pore sizes.


Advantage AF+Filter Cartridges

ApplicationsUHP Water Ozonated Cold Hot

UHP Chemicals Acids Solvents Photoresists Alkalines Developers

Mixed Acids Strippers

Equipment Point-of-Use Tools Chemical Delivery

System Cleaning Etching Photolithography Wet Benches

PTFE Membrane

Features and BenefitsSuperior PTFE Membrane Yields MaximumFiltration Results.

Highest flow rate cartridge available for smallestfootprint requirement.Rinsed to 18 megohm-cm resistivity with pulsed,ozonated, UHP water.Unique PTFE membrane ensures high flow ratesand superior retention.Available prewetted for immediate use in process.Advantage AF+ cartridges are non-fiber releasingand superior in extractable levels.Engineered for high temperature resistance.

Parkers TQM System Assures ConsistentPerformance and Reliable Filtration

Strict quality control measures include rigoroustesting for rinse up, shedding, flow rate andextractable levels.Integrity-tested and testable in situ.Thermally welded, eliminating adhesive extractables.Biosafe in accordance with USP Class V1-121oCPlastic Tests.Specifically designed to ensure cleanliness.All materials of construction are FDA listed asacceptable for potable and edible liquid contactaccording to CFR Title 21.

3


A F

Cartridge CodeAF = All Fluoropolymer







0.05 0.8 44 1.3 0.024 0.1 1.3 71 0.8 0.015 0.2 2.0 110 0.5 0.009 0.45 2.8 153 0.4 0.007 1 3.3 181 0.3 0.005



0.05 2.0 110 0.50 0.009 0.1 3.3 181 0.30 0.005 0.2 5.0 274 0.20 0.004 0.45 7.1 389 0.14 0.003 1 8.3 455 0.12 0.003



** Consult factory for gas flow data.

T

Seal MaterialD = CR 570E = EPDMK = KR 4079T = PFA/Viton*V = Viton*X = No O-Ring

W

Special PreparationW = Prewetted With Ozonated UHP

Water

TC

End Cap ConfigurationTC = 222 O-Ring/Flat

10

Length (in)04 = 410 = 1020 = 2030 = 30

C

Diameter (in)C = 3.25

D

Pore Size (m)D = 0.05S = 0.1F = 0.2R = 0.45Q = 1

Flow Advantages Advantage AF+ cartridges offer 30%

greater flow rate while decreasing process-ing time and increasing recirculation, fluidcleanliness, yields and capacity.

Maintaining the current flow rate whilelowering the differential pressure allowsAdvantage AF+ cartridges to achieve longer lifeand lower particle counts.

Maintaining the current flow rate anddifferential pressure with Advantage AF+

cartridges allows the use of smaller filterhousings with smaller footprint.

Maintaining the current flow rate anddifferential pressure with lower micron-ratedAdvantage AF+ cartridges improves yieldsand provides cleaner fluids.


375F (191C) at 20 P (1.4 bar) Maximum Differential Pressure:

Forward:70 psi (4.8 bar) at 77F (25C)30 psi (2.1 bar) at 315F (157C)

Reverse:50 psi (3.4 bar) at 77F (25C)

Quality Standard Each cartridge is flushed with pulsed UHP

ozonated water and monitored down-stream for TOC and particle count.

The release criteria are no TOC contribu-tion (ppb) and less than 4 particles/ml atthe rating or greater for 15 minutes.

Each lot of cartridges is evaluated formetallic ion contribution in 10% HNO3after a 24-hour static soak.

Total metals contribution cannot exceed25 ppb.

403010 200 50LPM

0

.1

.2

.3

0

1

2

3

4

5

Dif

fere

nti

al P

ress

ure

PS

I

GPM Flow Rate

BA

R

0 3 6 9 12 15

0.05m

0.1

m

0.2

m

0.45m

1m

SpecificationsMaterials of Construction:


Integrity Test: Bubble Point (Using N2 and a

membrane wet with 100% IPA at73F [23C]):

0.05m: > 50 psi (3.4 bar)0.1m: > 24 psi (1.7 bar)0.2m: > 16 psi (1.1 bar)0.45m: > 6 psi (0.4 bar)1m: > 3 psi (0.2 bar)

Outside Diameter: 3.25 in (82.6 mm)Inside Diameter: 1.125 in (29 mm)Lengths: 4-30 in (10-76 cm)

Membrane: hydrophobic PTFEMembrane Support/Drainage: PFACore, Sleeve, Adaptors: PFA/PTFE alloyEnd Caps: PFASeal Material: various

Sealing Method: thermal welding

Dimensions:

40 60200 80LPM

0

.1

.2

.3

0

1

2

3

4

5

Dif

fere

nti

al P

ress

ure

PS

I

GPM Flow Rate

BA

R

0 5 10 15 20 25

0.05m

0.1

m

0.2

m

0.45m

1m

4



Process Filtration DivisionBulletin C-7012 Eff. 4/97, Rev. 03/04 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2

Features and BenefitsSuperior Polyethersulfone Membrane YieldsMaximum Filtration Results High surface area design provides excellent flow rates

and life while maintaining high particle removal efficiency. Rinsed with 18 megohm-cm UHP water for high purity. Excellent resistance to most sanitizing agents such as

hot water, concentrated hydrogen peroxide and activechlorine compounds.

Low pressure drops improve filtration efficiency andextend filter life.

Spunbonded polypropylene support materials eliminatesites for potential shedding and increased particle counts.

High Flow Rate CapabilityWith PolyethersulfoneMembrane Filter CartridgesUltra-Pure polyethersulfone membrane cartridges providesuperior flow rates and stand up to a wide variety ofchemicals in applications including chemical, food andbeverage, and pharmaceutical. Unique polyethersulfoneconstruction features a high-surface area design whichallows for excellent flow rates and high particle removalefficiency. Hydrophilic polyethersulfone membranecartridges are ready for use and do not requireprewetting.

The Ultra-Pure Polyethersulfone Membrane Series isavailable in 0.1m, 0.2m, 0.45m and 0.65m pore sizes.

Ultra-Pure Membrane Series

Advantage PSFilter Cartridges

Polyethersulfone Membrane

Parkers TQM System Assures ConsistentPerformance and Reliable Filtration Strict quality control measures include rigorous testing

for rinse up, shedding, flow rate and extractable levels. Integrity-tested and testable in situ. Thermally welded, eliminating adhesive extractables. Biosafe in accordance with USP Class VI-121C

Plastics Tests. Specifically designed to ensure cleanliness. All materials of construction are FDA listed as

acceptable for potable and edible liquid contactaccording to CFR Title 21.

InformationStorage Optical Disk

Manufacturing Hard Disk

Manufacturing Optical Coatings Photographic

Films

Chemicals Bulk Chemicals Process Water Pharmaceutical

Intermediates Diagnostics

& Reagents Electroless

Nickel Plating Point-of-Use &

Distribution

ApplicationsFood & Beverage Bottled Water Wine Beer Process Water Vinegar Aseptic

PackagedLiquids

Edible Oils

5


TC

End Cap Conguration


SpecificationsMaterials of Construction: Membrane: hydrophilic

polyethersulfone Membrane Support/Drainage:

polypropylene Core/Cage: polypropylene End Fittings: polypropylene Seal Material: various Sealing Method: thermal welding

Dimensions: Diameter: 2.70 in (6.8 cm) Lengths: 10-40 in (25-102 cm)


Endotoxins: < 0.25 EU/ml

Integrity Test: Bubble Point (in UHP water):

0.1m > 70 psig (4.8 bar)0.2m > 45 psig (3.1 bar)0.45m > 24 psig (1.7 bar)0.65m > 16 psig (1.1 bar)

Diffusion Rate (10 in cartridge):0.1m < 33cc/min at 40 psig (2.7 bar)0.2m < 33cc/min at 30 psig (2.1 bar)0.45m < 33cc/min at 15 psig (1.0 bar)0.65m < 33cc/min at 10 psig (0.7 bar)


176F (80C) @ 30 P (2.1 bar) Maximum Differential Pressure:

Forward:70 psi (4.8 bar) @ 77F (25C)30 psi (2.1 bar) @ 176F (80C)

Reverse:50 psi (3.4 bar) @ 77F (25C)

Sterilization/Sanitization Methods: Hot Water: 190F (88C) Autoclave: 250F (121C)

for 30 minutes at 15 psi (1.0 bar) In situ Steam: 284F (140C)

for 60 minutes at 15 psi (1.0 bar) Chlorine Hydrogen Peroxide Sodium Hypochlorite Sanitizing Agents

(see Materials Selection Guide)


* Trademark of E. I. du Pont de Nemours & Co.** Consult Process Filtration Division for gas flow data.*** Available only in 9-5/8 (-9) and 19-5/8 (-19) lengths.1 PFA/Viton is O-Ring only; for DOE (HH), gasket is expanded PTFE.

Polyethersulfone Cartridges:Flow rate vs. DP for a 1 cpsliquid @ 73F (23C)**

P S

Cartridge CodePS = Polyethersulfone

U

GradeU = Ultra-Pure


E

Seal MaterialB = Buna NE = EPDMS = SiliconeT = PFA/Viton* 1V = Viton*X = No O-Ring/

No Gaskets

10

Length (in)10 = 1020 = 2030 = 3040 = 40

B

Diameter (in)B = 2.7

F

Pore Size (m)T = 0.03S = 0.1F = 0.2R = 0.45H = 0.65

Flow Factors: Pore Size GPM/ LPM/ PSID/ Bar/ (m) 1 PSID 1 Bar 1 GPM 1 LPM 0.1 1.8 99 0.56 0.010 0.2 3.5 192 0.29 0.005 0.45 5.5 301 0.18 0.003 0.65 6.5 356 0.15 0.003

40 60200 80LPM

0

.1

.2

.3

0

1

2

3

4

5

Diff

eren

tial P

ress

ure

PSI

GPM Flow Rate

BAR

0 5 10 15 20 25

0.05m

0.2m

0.45

m

0.65m

AR = 020 O-Ring/RecessedH H = DOE (Gaskets)LL = 120/120***LR = 120 O-Ring/Recessed***PR = 213 O-Ring/Recessed***S C = 2-226/FlatSF = 2-226/FinTC = 2-222/FlatTF = 2-222/Fin

6



High Flow Rate CapabilityWith PolyethersulfoneMembrane Filter Cartridges

Microelectronics Semiconductor Optical Disks Printed Circuits Hard Disks


and extended filter life while maintaining high particleremoval efficiency.

Rinsed to 18 megohm-cm resistivity with UHP water. Spunbonded polypropylene support materials

eliminate sites for potential shedding and increasedparticle counts.

Provides broad chemical compatibility.


Advantage PSFilter Cartridges






ApplicationsUHP Water Central PAD Polishing

Stations Point-of-Use

UHP Chemical Specialty

Chemicals Point-of-Use Bulk Photoresists

and Solvents

Mega-Pure polyethersulfone membrane cartridges providesuperior flow rates over the competition. The unique con-struction features a high-surface area design that allowsfor excellent flow rates and high particle removal efficiency.Hydrophilic polyethersulfone membrane cartridges requireno prewetting and are ready to use. The Mega-PurePolyethersulfone Membrane Series of filter cartridgesmeets or exceeds requirements for the filtration of UHPliquids used in the fabrication of state-of-the-art microelec-tronic devices.

The Mega-Pure Polyethersulfone Membrane Series isavailable in 0.03m, 0.1m, 0.2m and 0.45m pore sizes.

7



Specications

Materials of Construction:? Membrane: hydrophilic polyethersulfone? Membrane Support/Drainage: polypropylene? Structural Components: polypropylene? Seal Material: various? Sealing Method: thermal welding

Dimensions:? Diameter: 2.7 in (6.8 cm)? Lengths: 10-40 in (25-102 cm)

Surface Area (10 in cartridge):? Minimum 6.5 ft2 (0.6 m2)

Integrity Test:? Bubble Point (in UHP water):

0.03m > 90 psig (6.2 bar)0.1m > 70 psig (4.8 bar)0.2m > 45 psig (3.1 bar)

0.45m > 24 psig (1.7 bar)

Polyethersulfone Cartridges:Flow rate vs. DP for a 1 cpsliquid @ 73F (23C)**

Flow Factors:

Pore Size GPM/ LPM/ PSID/ Bar/ (m) 1 PSID 1 Bar 1 GPM 1 LPM

0.03 1.2 66 0.85 0.015 0.1 1.8 99 0.56 0.010 0.2 3.5 192 0.29 0.005 0.45 5.5 301 0.18 0.003

T C

End Cap ConfigurationHH = DOE (Gaskets)SC = 2-226/FlatSF = 2-226/FinTC = 2-222/FlatTF = 2-222/Fin

P S


E

GradeE = Electronics


T

Pore Size (m)T = 0.03S = 0.1F = 0.2R = 0.45

B

Diameter(in)B = 2.7

10

Length (in)10 = 1020 = 2030 = 3040 = 40

E

Seal MaterialB = Buna NE = EPDMS = SiliconeT = PFA/Viton*V = Viton*X = No O-Ring


* Trademark of E. I. du Pont de Nemours & Co.** Consult Process Filtration Division for gas flow data.

40 60200LPM

0

1

2

3

4

5

Dif

fere

nti

al P

ress

ure

PS

I

GPM Flow Rate

0 5 10 15 20

0.03m

0.1

m

0.2

m

0.45

m

0

.1

.2

.3

BA

R

Diffusion Rate (10 in cartridge):0.03m < 33cc/min at 45 psig (3.1 bar)0.1m < 33cc/min at 40 psig (2.7 bar)0.2m < 33cc/min at 30 psig (2.1 bar)0.45m < 33cc/min at 15 psig (1.0 bar)





8



High Flow Rate CapabilityWith PolyethersulfoneMembrane Filter CartridgesThe General Grade polyethersulfone membranecartridges are specifically designed to provide superiorflow rates at an economical cost. The unique constructionfeatures a high-surface area design that allows for excellentflow rates and high particle removal efficiency. Hydrophilicpolyethersulfone membrane cartridges require no prewettingand are ready to use. All materials of construction are thesame as used in the electronics grade Mega-Pure seriespolyethersulfone cartridges from Parker. This assures a costeffective device while maintaining excellent performance inUPW pad applications and other recirculation applications.

The General Grade is also ideal for final filtration of water andaqueous solutions in plating, chemical process, photographic,food and beverage and bulk pharmaceutical applications.

The General Grade Polyethersulfone Membrane Series isavailable in 0.03m, 0.1m, 0.2m, 0.45m and 0.65m poresizes.


and extended filter life while maintaining high particleremoval efficiency.

Spunbonded polypropylene support materialseliminate sites for potential shedding and increasedparticle counts.

Provides broad chemical compatibility. Excellent resistance to most sanitizing agents.

General Grade Membrane Series

Advantage PSFilter Cartridges Polyethersulfone Membrane

Parkers TQM System Assures ConsistentPerformance and Reliable Filtration Thermally welded, eliminating adhesive extractables. Biosafe in accordance with USP Class VI-121C



ApplicationsUHP Chemical Specialty

Chemicals Bulk

Photoresistsand Solvents

UHP Water Central PAD Polishing

Stations

Food & Beverage Bottled Water Wine Beer Process Water Vinegar Edible Oils Aseptic Packaged

Liquids

Miscellaneous Pre, Post and

Point-Of-Use DIWater Filtration

PharmaceuticalIntermediates

Plating Solutions Bulk Chemicals

9

Process Filtration Division* Trademark of E. I. duPont de Nemours & Co.** Consult Process Filtration Division for gas flow data.*** Available only in 9-5/8 (-9) and 19-5/8 (-19) lengths.1 PFA/Viton is O-Ring only; for DOE (HH), gasket is expanded PTFE.


PS




SpecificationsMaterials of Construction: Membrane: hydrophilic

polyethersulfone Membrane Support/Drainage:

polypropylene Structural components: polypropylene Seal Material: various Sealing Method: thermal welding







Endotoxins:



Evadur High Flow, HighPurity Membrane CartridgeEvadur is a high purity polyethersulfone membranecartridge designed specifically for demanding waterand chemical filtration applications. Evadur offers aunique pleat design and rugged construction forsuperior retention and filter life. The hydrophilicpolyethersulfone membrane resists a wide variety ofchemicals. Evadur achieves very high flow rates whilemaintaining a very low differential pressure. Evadurhas also been designed to have extremely fast flush-up or clean up times. Rely on Evadur for your highflow, high purity membrane applications.


Evadur Filter Cartridges


Features and BenefitsHigh bacterial retention.

Complete product offering from 0.03 to0.65 microns.

High purity polypropylene support structures.

Thermally bonded to exclude liquid captureand extractables.

All materials biosafe in accordance with USPClass VI-121C Plastic Test.

All materials listed as acceptable for potable andedible contact according to CFR Title 21.

Manufactured in a zone Class 10 clean room.

Manufactured with strict quality controlmeasuring rinse-up, integrity testing, flowrate, and extractable levels.

Parker Process Filtration Division is anISO9000:2000 Certified Division.

Applications Pre and post RO filtration Point-of-use filtration Bottled water Specialty chemical

11


* Trademark of E. I. duPont de Nemours & Co.** Consult Process Filtration Division for gas flow data.




Recommended Operating Conditions:? Maximum Temperature:

176F (80C) @ 30 P (2.1 bar)? Maximum Differential Pressure:



Materials of Construction:? Membrane: hydrophilic polyethersulfone? Membrane Support/Drainage: polypropylene? Structural components: polypropylene? Seal Material: various? Sealing Method: thermal welding

Dimensions:? Diameter: 2.7 in (6.8 cm)? Lengths: 10-40 in (25-102 cm)

Sterilization/Sanitization Methods:? Isopropyl Alcohol? Sodium Hydroxide? Hydrogen Peroxide? Hot Water: 190F (88C)

@ 5 psid (0.3 bar)? Autoclave: 250F (121C) for

30 minutes at 15 psi (1.0 bar)? In Situ Steam: 284F (140C)

for 60 minutes at 15 psi (1.0 bar)? Chlorine? Sodium Hypochlorite? Sanitizing Agents (see Materials Selection Guide, Bulletin C-770)

Installation Rinse-In:? Cartridges typically rinse to back

ground resistivity in less than sixminutes at 3.5 gpm/10" equivalent

Evadur flow rate vs. P for 1 cps liquid @ 73F (23C)

End Cap Conguration

EV

Cartridge CodeEV = Evadur Cartridge

B


10

Length (in)10 = 1020 = 2030 = 3040 = 40

Seal MaterialE = EPRB = Buna-NS = SiliconeT = PFA encapsulatedV = Viton* (o-ring only)X = No seal material

HH = Double Open EndDX = DOE w/extenderSC = 226 O-ring/Flat CapSF = 226 O-ring/FinTC = 222 O-ring/Flat Cap

TF = 222 O-ring/FinLL = 120 O-ring (both ends)LR = 120 O-ring/Recessed EndPR = 213 O-ring/RecessedAR = 020 O-ring/Recessed

E TCT

Pore Size (m)T = 0.03S = 0.1F = 0.2R = 0.45H = 0.65

40 60200LPM

0

1

2

3

4

5

Diff

eren

tial P

ress

ure

PSI

GPM Flow Rate0 5 10 15 20

0.03m

0.1

m

0.2m

0.45

m

0

.1

.2

.3

BAR

0.65m

Specifications

12



Double the Flow With NextGeneration PTFE MembraneFilter CartridgesUltra-Pure PTFE membrane filter cartridges perform at thehighest flow rate to provide the cleanest fluids at the lowestpossible cost. Parkers unique PTFE membrane construc-tion serves as a low-cost alternative to all fluoropolymercartridges in less aggressive applications and maintainsbroad chemical compatibility with low extractable levels andhigh particle retention rates.

The Ultra-Pure PTFE Membrane Series is available in0.1m, 0.2m, 0.45m and 1m pore sizes.

ApplicationsPharmaceutical Tank Vents Filtration of

Compressed Gases Filtration of

SolventsProcess Gases Bulk and Point-

of-Use Gases Compressed Air

Food and Beverage Sterile Venting of Holding

Tanks Sterile CO2 Filtration Microbial Control of Inlet

Air for Bioprocessing ofFoods

Chemicals Solvents Bulk Filling Acids


Advantage PFFilter Cartridges

PTFE Membrane

Features and BenefitsSuperior PTFE Membrane YieldsMaximum Filtration Results High flow rates and optimized surface area reduce

processing time and filter consumption. Rinsed with 18 megohm-cm UHP water for high purity. Non-fiber releasing. All-polypropylene component construction complemented

by a variety of O-ring seals withstands demandingoperating parameters.

Narrow pore size distribution ensures the ultimate inretention and flow rate.

Naturally hydrophobic membrane maintains air flowrates in venting and gas applications.

Available prewetted for immediate use in process.





13

Process Filtration Division* Trademark of E. I. duPont de Nemours & Co.** Consult Process Filtration Division for gas flow data.*** Available only in 9-5/8 (-9) and 19-5/8 (-19) lengths.1 PFA/Viton is O-Ring only; for DOE (HH), gasket is expanded PTFE.


PF

Cartridge CodePF = PTFE

Ordering InformationF

Pore Size (m)S = 0.1F = 0.2R = 0.45Q = 1D = 0.05

B


10

Length (in)10 = 1020 = 2030 = 3040 = 40

E

Seal MaterialB = Buna ND = CR 570E = EPDMS = SiliconeT = PFA/Viton* 1V = Viton*X = No O-Ring/

No Gaskets

TC

End Cap Configuration

U

GradeU = Ultra-Pure

W

SpecificationsMaterials of Construction: Membrane: hydrophobic PTFE Membrane Support/Drainage:

polypropylene Structural Components:

polypropylene Seal Material: various Sealing Method: thermal welding



Endotoxins: < 0.25 EU/ml

Integrity Test: Bubble Point (100% IPA):

0.1m > 24 psig (1.7 bar)0.2m > 16 psig (1.1 bar)0.45m > 6 psig (0.4 bar)1m > 3 psig (0.2 bar)






Sterilization/Sanitization Methods: Autoclave or in situ Steam:

250F (121C) for 30 minutes at15 psi (1.0 bar)

70% IPA 10% Hydrogen Peroxide

PTFE Cartridges:Flow rate vs. P for a 1 cpsliquid @ 73F (23C)**

Flow Factors: Pore Size GPM/ LPM/ PSID/ Bar/ (m) 1 PSID 1 Bar 1 GPM 1 LPM

40 60200 80LPM

0

.1

.2

.3

0

1

2

3

4

5

Diff

eren

tial P

ress

ure

PSI

GPM Flow Rate

BAR

0 5 10 15 20 25

0.01

m

0.2m

0.45

m

1m


AR - 020 O-Ring/RecessedH H = DOE (Gaskets)LL = 120/120***LR = 120 O-Ring/Recessed***PR = 213 O-Ring/Rcessed***S C = 2-226/FlatSF = 2-226/FinTC = 2-222/FlatTF = 2-222/Fin

0.1 3.0 164 0.33 0.0060.2 4.5 247 0.22 0.0040.45 6.5 356 0.15 0.0031 7.5 411 0.13 0.002

14



Twice the Flow and RecirculationRate With Next Generation PTFEMembrane Filter Cartridges

ApplicationsUHP Chemicals Acids Solvents Photoresists Tank Vents Etchants Alkalies

Features and BenefitsSuperior PTFE Membrane YieldsMaximum Filtration Results High flow rates and reduced pressure drops for im-

proved filtration efficiency. Rinsed to 18 megohm-cm resistivity with UHP water. Large, high-purity filtration area for maximum yields. Non-fiber releasing. Narrow pore size distribution ensures the ultimate

in retention and flow rate. Available prewetted for immediate use in process.






Advantage PFFilter Cartridges

Developers Strippers Recirculation Wet-Etch

Systems Rinse Baths

Process Gases& CompressedAir

PolymerFiltration

Mega-Pure PTFE membrane filter cartridges provideunsurpassed flow rate capability. Parkers PTFE membranecartridge outperforms all competitive cartridges of the samerating at a ratio of 2 to 1 or greater, thus reducing thenumber of cartridges and housings required. PTFEmembrane filter cartridges are a low-cost alternative toall fluoropolymer cartridges. The Mega-Pure PTFEMembrane Series of filter cartridges meets or exceedsrequirements for the filtration of UHP liquids used in thefabrication of state-of-the-art microelectronic devices.

The Mega-Pure PTFE Membrane Series is available in0.05m, 0.1m, 0.2m, 0.45m and 1m pore sizes.

PTFE Membrane

15



Specications



* Trademark of E. I. duPont de Nemours & Co.** Consult Process Filtration Division for gas flow data.*** Available only in 9-5/8 (-9) and 19-5/8 (-19) lengths.1 PFA/Viton is O-Ring only; for DOE (HH), gasket is expanded PTFE.

W


E

Seal MaterialB = Buna ND = CR 570E = EPRK = KR4079S = SiliconeT = PFA/Viton* 1V = Viton*X = No O-Ring/

No Gaskets

TC

End Cap Configuration

E

GradeE = Electronics

PF

Cartridge CodePF = PTFE

PTFE Cartridges:Flow rate vs. DP for a 1 cpsliquid @ 73F (23C)**

Flow Factors:


0.05 1.5 82 0.67 0.012 0.1 3.0 164 0.33 0.006 0.2 4.5 247 0.22 0.004 0.45 6.5 356 0.15 0.003 1 7.5 411 0.13 0.002

10

Length (in)10 = 1020 = 2030 = 3040 = 40

B


F

Pore Size (m)D = 0.05S = 0.1F = 0.2R = 0.45Q = 1

40 60200 80LPM

0

.1

.2

.3

0

1

2

3

4

5

Dif

fere

nti

al P

ress

ure

PS

I

GPM Flow Rate

BA

R

0 5 10 15 20 25

0.1

m

0.2

m

0.45

m

1m

0.05m



Integrity Test: Bubble Point (100% IPA):

0.05m > 50 psig (3.4 bar)0.1m > 24 psig (1.7 bar)0.2m > 16 psig (1.1 bar)0.45m > 6 psig (0.4 bar)1m > 3 psig (0.2 bar)


176F (80C) @ 30 DP (2.1 bar) Maximum Differential Pressure:


Reverse: 50 psi (3.4 bar) @ 77F (25C)

AR = 020 O-Ring RecessedHH = DOE (Gaskets)LL = 120/120***LR = 120 O-Ring Recessed***PR = 213 O-Ring Recessed***S C = 2-226/FlatSF = 2-226/FinTC = 2-222/FlatTF = 2-222/Fin

Membrane: hydrophobic PTFEMembrane Support/Drainage:polypropyleneStructural Components:polypropyleneSeal Material: variousSealing Method: thermal welding

Materials of Construction:

16


Process Filtration Division!Bulletin C-2010 Eff. 8/97, Rev. 03/04

2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2

Pleated Series

Fulflo AdvantageFilter Cartridges

Applications

Chemicals Electronic Food & Beverage Magnetic Media Pharmaceuticals Cosmetics Medical Photographic

All-polypropylene media and construction meeta broad range of performance requirements.

One-piece fused construction is 100% bondedfor maximum cartridge integrity.

High surface area design provides superior flowrates and extended service life.

All media and structural components comply withbiological, USP XXI Class VI requirements forplastic and are nontoxic per WI-38 Human CellCytotoxicity Test.

Features and Benefits All materials of construction are FDA listed as


Fixed pore construction provides ultimate particleretention efficiency.

Major end seal options are available to fit mostvessel requirements.

Advantage cartridges are non-fiber releasing.

Absolute Rated High EfficiencyFrom All-Polypropylene PleatedCartridgesFulflo Advantage Cartridges, made of pleatedpolypropylene microfiber, provide high efficiency andhigh purity filtration. The high submicron efficiency ofthe Advantage line makes it an ideal membraneprefilter or cost-effective alternative to membranecartridges in a wide range of applications.

Advantage Pleated Cartridges are available in0.3m, 0.6m, 1.2m, 2.5m, 5m, 10m, 20m,40m and 70m absolute rated pore sizes(99.99% removal; = 10,000).

Polypropylene

17


025

Particle RemovalRating (m)003 = 0.3006 = 0.6012 = 1.2025 = 2.5050 = 5100 = 10200 = 20400 = 40700 = 70

Notes:1. Clean P is PSI

differential at start.2. Viscosity is centistokes.

Use Conversion Tablesfor other units.

3. Flow Factor is P/GPMat 1 cks for 10 in (or

single).4. Length Factors convert

flow or P from 10 in(single length) to requiredcartridge length.

Advantage Length Factors

Beta Ratio () =

Upstream Particle Count @ Specified Particle Size and Larger

Downstream Particle Count @ Specified Particle Size and Larger

Percent Removal Efficiency = -1 x 100

Performance determined per ASTM F-795-88. Single-Pass Test using AC testdust in water at a flow rate of 3.5 gpm per 10 in (13.2 lpm per 254 mm) cartridge.


Pleated Series

DO

End Cap ConfigurationAR = 020 O-Ring/Recessed (Gelman)DO = Double Open End (DOE)DX = DOE With Core ExtenderL L = 120/120 (Filterite LMO)**L R = 120 O-Ring/Recessed**

(Nuclepore)PR = 213 O-Ring/RecessedSC = 226 O-Ring/CapSF = 226 O-Ring/FinSSC = S.S. Inserted 226 O-Ring/ClosedSSF = S.S. Inserted 226 O-Ring/FinSTC = S.S. Inserted 222 O-Ring/ClosedSTF = S.S. Inserted 226 O-Ring/FinTC = 220 O-Ring/CapTF = 222 O-Ring/Fin

N

Seal MaterialE = EPRN = Buna-NS = SiliconeT = PFA

Encapsulated Viton*1 (O-ring only)V = Viton*X = No Seal Material

10

NominalLength (in)10 = 9 13/1620 = 19 15/1630 = 30 1/1640 = 40

AP

Cartridge CodeAP = AdvantagePolypropylene

R

Special OptionsNo Symbol = No OptionB = 100% Bubble-

Point TestR = Rinse with DI

Water (5 minutes)Z6 = Individual Poly Bag

Only

A

SupportConstructionA = Heavy-Wall PolypropleneX = Coreless

Cartridge


* A trademark of E. I. duPont de Nemours & Co.1 PFA/Viton is O-Ring; for DOE, T is expanded PTFE gasket.For pleated cartridge configurations and dimensions, see Bulletin A-700 in the Appendix.

SpecificationsFiltration Ratings:

99.99% at 0.3m, 0.6m, 1.2m,2.5m, 5m, 10m, 20m, 40mand 70m pore sizes

Materials of Construction: Type of Construction: integrally sealed,

all-polypropylene pleated media sup-ported by all-polypropylene construction

Filter Media: composite, spunbonded/melt blown continuous polypropylenemicrofiber matrix

Pleat Support Layer (Upstream):polypropylene

Pleat Drainage Layer (Downstream):polypropylene

Media Support Core:high-strength polypropylene

Media Protective Cage:molded polypropylene

Pleat Pack Side Seal:fused polypropylene

DOE Caps: polypropylene SOE Caps/O-Ring Adaptors:

polypropylene

Gaskets (DOE Style): Buna-N,FDA grade (standard)

O-Rings (SOE Style): silicone,FDA grade (standard)

Optional Gasket Materials:(non-FDA): EPR, Viton,* silicone

Optional O-Ring Materials:(non-FDA): EPR, Viton,* Buna-N,PFA encapsulated Viton*

Maximum RecommendedOperating Conditions:

Length Length(in) Factor

10 1.020 2.030 3.040 4.0

Liquid Particle Retention Ratings (m)@ Removal Efficiency of:

=10000 =1000 =100 =50 =20 =10 Cartridge Absolute 99.9% 99% 98% 95% 90%

AP 003 0.3


Process Filtration Division!

Bulletin C-2020 Eff. 8/97, Rev. 03/04 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2

Unique Cartridge ConstructionImproves Particle Retention,Service Life and Flow Rates

Features and Benefits Premium pleated cellulosic media allow high flow

capacity at low pressure drop.

Available in a variety of cartridge lengths and end cap configurations to fit most industrial vessels.

Phenolic resin impregnated to provide strength, integrity and high contaminant capacity.

Pleated Series

Fulflo PCCFilter Cartridge

App l i ca t i ons Chemical Oil Field Photographic

Film & Paper Metal Treatment Process Water

Synthetic Fibers Recording Media Coatings, Paint, Ink & Resins Petroleum Process Gas

Parker Fulflo Pleated Cellulosic Cartridges meeta broad range of critical filtration applications.Each cartridge in the Fulflo Pleated Cellulosicseries is manufactured with premium grade,phenolic impregnated, cellulosic filter media.Phenolic resin locks the cellulosic fibers into arigid, porous matrix. This structure providessuperior particle removal and particle retentionperformance under the most severe conditions.

Fulflo Pleated Cartridges are available in 2m, 3m,10m, 30m and 60m pore sizes (99%+ removal: = 100).

High flow rates permit the use of smaller vesselsand fewer cartridges.

Lower P reduces power requirements andpump wear and tear.

Longer cartridge life reduces frequency of filterchange out resulting in less disposal costs,reduced inventory and less process interruptions.

Cellulosic/Phenolic

19



Pleated Series

* A trademark of E. I. duPont de Nemours & Co.For pleated cartridge configurations and dimensions, see Bulletin A-700 in the Appendix.

SpecificationsFiltration Ratings: 99%+ at 2m, 3m, 10m,

30m, and 60m pore sizes

Materials of Construction: Phenolic impregnated

cellulosic media (PCC) Polypropylene support Stainless steel support (optional)

PCG is glass-modified cellulose

Stainless Steel Support:Maximum Temperature: 250F (121C)Maximum P: 50 psi (3.5 kg/cm2)Optimum Change Out P: 35 psi(2.5 km/cm2)

Polypropylene Support:Maximum Temperature @ 10 psid(0.7 km/cm2): 200F (93C)Maximum Temperature @ 35 psid(2.5 km/cm2): 125F (52C)Maximum P @ 75F (24C): 60 psi(4.2 kg/cm2)Change Out P: 35 psi(2.5 km/cm2)

Liquid Particle Retention Ratings (m) @ Removal Efficiency of:

PCC / PCG Length Factors

Length Length(in) Factor

9 1.010 1.019 2.020 2.029 3.030 3.040 4.0

PCC / PCG Flow Factors (psid/gpm @ 1 cks)

Rating Flow (m) Factor

2 0.026 3 0.01710 0.00230 0.00160 0.0005

Notes:1. Clean P is PSI differential at start.2. Viscosity is centistokes. Use Conversion

Tables for other units.3. Flow Factor is P/GPM at 1 cks for 10 in

(or single).4. Length Factors convert flow or P from 10 in

(single length) to required cartridge length.

Flow Rate and Pressure Drop Formulas:

Flow Rate (gpm) = Clean P x Length Factor Viscosity x Flow Factor

Clean P = Flow Rate x Viscosity x Flow Factor Length Factor

( )Beta Ratio () = Upstream Particle Count @ Specified Particle Size and Larger

Downstream Particle Count @ Specified Particle Size and Larger

Percent Removal Efficiency = - 1 x 100

Performance determined per ASTM F-795-88. Single-Pass Test using AC test dust in water at aflow rate of 2.5 gpm per 10 in (9.5 lpm per 254 mm).

**Available only in 9-5/8 (-9) and 19-5/8 (-19) lengths

7.0 9.5 17.0 50.0100.0

=5000 =1000 =100 =50 =20 =10 Cartridge Absolute 99.9% 99% 98% 95% 90%

PCG 020PCC 3PCC 10PCC 30PCC 60

101222

100150

1.8 3.0 5.511.030.0

0.9 1.7 3.0 5.515.0

0.3 0.6 1.0 1.5 5.0

0.1 0.2 0.3 0.5 2.0

PCC Particle Removal Efficiency Over Life

Ordering InformationN

Seal MaterialA = Poly Foam

(DOE Gasket Only)E = EPRN = Buna-NS = SiliconeV = Viton*

TC

End Cap ConfigurationsAR = 020 O-Ring/Recessed

(Gelman)DO = Double-Open-End (DOE)DX = DOE With Core ExtenderLL = 120/120 (Filterite LMO and Nuclepore Polymeric Vessels)**LR = 120 O-Ring/Recessed

(Nuclepore)**

PCG020

Cartridge Code (m)PCG020 2PCC3 3PCC10 10PCC30 30PCC60 60

10

Nominal Length(code) (in) (mm) 9 9-5/8 24410 9-13/16 24919 19-5/8 49820 19-15/16 50629 29-1/4 74330 30-1/16 76440 40 1016

A

Support ConstructionA = Polypropylene

(DOE/SOE)G = 304 Stainless Steel (DOE)

OB = Std. Open End/PolyproSpring Closed End

PR = 213 O-Ring/Recessed(Ametek and ParkerLT Polymeric Vessels)**

SC = 226 O-Ring/CapSF = 226 O-Ring/FinT C = 222 O-Ring/CapT F = 222 O-Ring/FinTX = 222 O-Ring/Flex FinXB = Ex. Core Open End/Poly-

pro Spring Closed End

=

=

=

=

=

=

=

Recommended Operating Conditions: Maximum 10 gpm per 10 in length (38 lpm/254 mm)

Bet

a R

atio

( )

% R

emo

val E

ffic

ien

cy

Particle Size (m)

20

WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CANCAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for furtherinvestigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or systemin the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, issolely responsible for making the final selection for the products and systems and assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker HannifinCorporation and its subsidiaries at any time without notice.

Bulletin C-2030 Eff. 03/03 2001 Parker Hannifin CorporationAll Rights ReservedPage 1 of 2

High Efficiency, Flow Rate, DirtHolding Capacity & HighPressure Pleated CartridgesParker's Fulflo 1401 cartridges are designed toreplace similar competitive cartridges in highpressure water injection & disposal, gas streamsand fluid processing. The cartridges are availablein cellulosic and polypropylene media. Fulflo1401's are available in absolute ratings of 2.5, 6,10, 12, 22, and 100 microns ( = 5000, 99.98%)

Features and Benefits Retrofits into compatible housing that use 1401 style cartridges

Maximize surface area to prevent particle bridging.

High filtration efficiency


Pleated Series

Fulflo 1401, High PressureFilter Cartridge

Applications Water Injection Solvents Acids Chemicals Hydrocarbons Water

Low pressure drops

High flow rates

Internal o-ring seal for positive sealing

Rugged construction

21

PPC005 -1401PPC010 -1401PPC020 -1401PCG020 1401PCC3 - 1401PCC10 - 1401PCC30 - 1401


Pleated Series


Specifications

Beta Ratio () = Upstream Particle Count @ Specified Particle Size and LargerDownstream Particle Count @ Specified Particle Size and Larger

Percent Removal Efficiency = -1 x 100

Performance determined per ASTM F-795-88. single-pass test using AC testdust in water.

( )

Filtration Ratings: 99.98% at 2.5m, 6m, 10m, 12m, 22m, and 100m pore sizes

Materials of Construction:Filter media;

Operating Conditions:

3 3/4" OD x 2 1/8" ID x 38-3/4"longDimensions:

Pressure rating - 150 PSID Temperature Rating - 275OF Recommended flow rate - 75 GPM Change out P - 35 PSID

Liquid Particle Retention Ratings (m)@ Removal Efficiency of:

2.56

10101222

100

2.84.8

88.6101885

0.51.2

51.8

36

11

WARNING! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSEDEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigationby users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the currentproduct catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible formaking the final selection for the products and systems and assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporationand its subsidiaries at any time without notice.

Bulletin C-2040 Eff. 11/99, Rev. 03/04 2000 Parker Hannifin CorporationAll Rights ReservedPage 1 of 4

Quality, Economical Filtrationfor Critical Process ApplicationsParkers Poly-Mate Cartridges incorporate aunique combination of polypropylene melt blownand spunbonded media to provide high surfacearea, finish-free and non-fiber releasing filtration.All-polypropylene construction maximizes chemicalresistance to acids, bases, salts, and most organicsolvents.

Poly-Mate Pleated Cartridges are available in0.5m, 1m, 5m, 10m, 30m, and 60m poresizes (99% removal; = 100).


Pleated Series

Fulflo Poly-MateFilter Cartridges

Applications Food & Beverage Photographic High-Technology

Coatings Deionized Water R.O. Membrane

Prefiltration

Disposal Wells Process Water Fine Chemicals Wastewater Plating Chemicals

Poly-Mate Xtra Duty cartridges are availablewith backwashable construction, reducingreplacement maintenance and cartridgedisposal costs. See page 4 for procedure.

All materials of construction are FDA listed asacceptable for potable and edible liquidcontact according to CFR Title 21.

One piece, continuous to 40 in length,integrally sealed pleated filter media.

Polypropylene

High efficiency rated for critical process applications(99% efficiency).

High pleated surface area for extended servicelife, low pressure drop and high flow capacity.

Poly-Mate Xtra Duty (PXD) cartridge featuresglass-filled polypropylene core for high temperatureand high pressure use with rigid outer cagesupporting pleated media in backwash applications.

Optional stainless steel O-ring adapter insertsprovide added strength for in situ sterilization.

Features and Benefits

23


The Filters of Choice for . . .

SpecificationsFiltration Ratings: 99% at 0.5m, 1m, 5m, 10m,

30m, and 60m pore sizes

Effective Filtration Area: Up to 6.0 ft2/10 in (0.6m2/254mm)

Materials of Construction: Filter Media and Support Layers:

polypropylene

Bonding Polymer: none, completelyfusion-sealed

Surface Treatment: none (fusion-sealed), chemically inert and neutral

Media Protection:PM - polypropylene nettingPXD - polypropylene cage

Support Core:PM - polypropylenePXD - glass-filled polypropylene

Pleat Pack Side Seal:fused polypropylene

End Caps: polypropylene Seals: Buna-N, EPR, silicone,

Viton,* PFA encapsulated Viton*O-rings, polyethylene foam gaskets

Recommended Operating Conditions: Poly-Mate Cartridges:

Change Out P: 35 psid (2.4 bar)Maximum Temperature: 200F (93C)Maximum Temperature @ 35 psid(2.4 bar): 125F (52C)Maximum P @ 70F (21C):60 psid (4.1 bar)Maximum P @ 200F (93C):10 psid (0.7 bar)

Poly-Mate Xtra-Duty Cartridges:Change Out P: 35 psid (2.4 bar)Maximum Temperature: 200F (93C)Maximum Temperature @ 35 psid(2.4 bar): 200F (93C)Maximum P @ 70F (21C):

90 psid (6.1 bar)Maximum P @ 200F (93C):35 psid (2.4 bar)

Dimensions: Overall Length: See bulletin A-700.

SOE fits standard vessels with O-ring receptacles.

Cartridge Outside Diameter:2-1/2 in (63.5 mm)

Cartridge Inside Diameter:DOE - 1-1/16 in (27 mm);SOE - 1 in (25.4 mm)

Recommended Maximum Flow Rate: Maximum 10 gpm per 10 in length

Designed Flow Rate (in water): 2.5 gpm per 10 in length

(9.5 lpm per 254 mm)


Pleated Series

Foods and BeveragesFoods and beverages must befiltered with products made fromcomponents complying with FDAregulations for food contact use.Extraction of binders, chemicaladditives and media fragmentsinto foods and beverages isunacceptable. Poly-Matecartridges are thermally bondedand meet all FDA requiredstandards. In many applications,PolyMate cartridges are amore cost-effective alternativeto melt blown and spunbondeddepth cartridges.

High Technology CoatingsHigh tech coatings used on magnetictape, floppy discs, lenses and opticalfibers require filtration with productsthat capture agglomerates and largecontaminants with high efficiencywhile allowing the smaller c

Parker Products Filtration Process-L

Documents

Transcript of Parker Products Filtration Process-L