Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation \ Services
Stationary Energy SupplyMOVITRANS® Installation MaterialTCS, TVS, TLS, TIS
Operation InstructionsEdition 06/200711516216 / EN
SEW-EURODRIVE – Driving the world
3 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
Contents
Contents1 Important Notes................................................................................................... 5
1.1 Safety and warning instructions .................................................................. 51.2 Rights to claim under limited warranty ........................................................ 51.3 Exclusion of liability..................................................................................... 5
2 Safety Notes ........................................................................................................ 62.1 Designated use ........................................................................................... 62.2 Operational environment............................................................................. 62.3 Installation and startup................................................................................ 72.4 Operation and service................................................................................. 72.5 Waste disposal............................................................................................ 8
3 Unit Design .......................................................................................................... 93.1 Unit designation .......................................................................................... 93.2 Nameplate................................................................................................. 133.3 Scope of delivery ...................................................................................... 133.4 TCS compensation box............................................................................. 163.5 TVS connection distributor........................................................................ 173.6 TLS line cable and supply cable ............................................................... 183.7 TIS10...-V..-0 installation plate.................................................................. 193.8 TIS...-X..-0 Retaining plate ....................................................................... 203.9 TIS...-H..-0 holding fixture ......................................................................... 213.10 TIS...P..-0 rigid profile section................................................................... 223.11 TIS...-F..-0 flexible profile section ............................................................. 233.12 TIS...-A..-0 cable bushing ......................................................................... 24
4 Installation ......................................................................................................... 254.1 Prefabricating the TLS Line Cable ............................................................ 254.2 Prefabricating the TLS supply cable ......................................................... 284.3 Connecting the TLS line cable to the TCS compensation box.................. 294.4 Connecting the TLS line cable to the TVS connection distributor ............. 304.5 Connecting the TLS supply cable to the TVS connection distributor ........ 314.6 Grounding the TCS compensation box/TVS connection distributor.......... 324.7 Installing the TIS10A008... equipment V1................................................. 33
5 Technical Data................................................................................................... 375.1 Certifications ............................................................................................. 375.2 TLS line cable/supply cable ...................................................................... 375.3 Documentation ......................................................................................... 39
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 4
Contents
6 Dimension Sheets ............................................................................................. 406.1 TCS10A compensation box ...................................................................... 406.2 TVS10A connection distributor ................................................................. 416.3 TIS...-V..-0 installation plate...................................................................... 436.4 TIS...-X..-0 Retaining plate........................................................................ 446.5 TIS...-H..-0 holding fixture ......................................................................... 466.6 TIS...-P..-0 rigid profile section.................................................................. 476.7 TIS...-F..-0 flexible profile section ............................................................. 476.8 TIS...-A..-0 cable bushing ......................................................................... 486.9 Shielding plate .......................................................................................... 49
7 Address List ...................................................................................................... 50
Index ................................................................................................................... 59
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 5
1 Safety and warning instructionsImportant Notes
1 Important Notes1.1 Safety and warning instructions
Always observe the safety and warning information in this documentation.
1.2 Rights to claim under limited warrantyA requirement of fault-free operation and fulfillment of any rights to claim under limitedwarranty is that you adhere to the information in the operating instructions. Conse-quently, read the operating instructions before you start working with MOVITRANS®
units!
Make sure that the operating instructions are available to persons responsible for theplant and its operation, as well as to person who work independently on the units. Youmust also ensure that the documentation is legible.
1.3 Exclusion of liabilityYou must comply with the information contained in these operating instructions to en-sure safe operation of the MOVITRANS® units and to achieve the specified productcharacteristics and performance requirements. SEW-EURODRIVE assumes no liabilityfor injury to persons or damage to equipment or property resulting from non-observanceof the operating instructions. In such cases, any liability for defects is excluded.
Electrical hazardPossible consequences: Severe or fatal injuries.
Hazard Possible consequences: Severe or fatal injuries.
Hazardous situationPossible consequences: Slight or minor injuries.
Harmful situationPossible consequences: Damage to the unit and the environment.
Tips and useful information.
6 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
2 Designated use Safety Notes
2 Safety Notes2.1 Designated use
The MOVITRANS® TIS10A025... installation components may only be used withTHM10E pick-ups.
TheMOVITRANS® TIS10A008... installation components may only be used with the u-shaped THM10C or THM20C pick-ups.
Do not operate the unit until you have established that the machine complies with theEMC Directive 89/336/EEC and that the conformity of the end product has been deter-mined in accordance with the Machinery Directive 98/37/EEC (with reference to EN60204).
The Professional Association (Berufsgenossenschaft, BG) BG regulation B11 "Electro-magnetic fields" must be observed during installation, startup and operation of systemswith contactless energy transmission by induction for use in industrial workplaces.
2.2 Operational environmentThe following uses are prohibited unless the units are expressly designed for the pur-pose:
In longer transmission lines, the MOVITRANS® TCS compensation boxes are con-nected in series to the TLS line cables.
The TVS connection distributors are used as connection points for the line cable in thefield. Observe all information on the technical data and the permitted conditions wherethe unit is operated.
The MOVITRANS® TLS line cables are intended for use in industrial and commercialinstallations for the operation of contactless power transmission systems. The TLS linecables are suitable for the connection to the TAS transformer module on the output side.The TLS lines cables are laid along the transmission line. Observe all information on thetechnical data and the permitted conditions where the unit is operated.
• Use in potentially explosive areas.
• Use in areas exposed to harmful oils, acids, gases, vapors, dust, radiation, etc.
• Use in non-stationary applications that are subject to mechanical vibration and shockloads in excess of the requirement in EN 50178.
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 7
2 Installation and startupSafety Notes
2.3 Installation and startup• Never install damaged products or take them into operation. Submit a complaint to
the shipping company immediately in the event of damage.
• Only specialists with the appropriate accident prevention training are allowed toperform installation, startup and service work on the unit. These specialists must alsocomply with the regulations in force (e.g. EN 60204, VBG 4, DIN-VDE 0100/0113/0160) when performing this work.
• Follow the specific instructions during installation and startup of the othercomponents!
• Take appropriate measures (for example, connect binary input DI00 "/CONTROLLER INHIBIT" to DGND on the TPS10A stationary converter) to ensurethat the system does not start up unintentionally when power is switched on.
• Please wear appropriate protective clothing during assembly, especially whensoldering the TLS line cables. Take appropriate security measures to prevent burnsby the soldering iron or by hot solder. Take appropriate measures to prevent hotsolder from leaking.
2.4 Operation and service• Disconnect the TPS10A stationary converter and the TAS10A transformer module
from the supply system before removing the protective cover. Dangerous voltagesmay still be present for up to 10 minutes after disconnection from the power supplysource.
• When the unit switch is in the ON position, dangerous voltages are present at theoutput terminals as well as any connected cables and terminals. This is also the casewhen the TPS10A stationary converter is inhibited.
• The fact that the V1 operation LED and other display elements are no longerilluminated on the TPS10A stationary converter does not indicate that the TPS10Astationary converter and the TAS10A transformer module have been disconnectedfrom the power supply and do not carry any voltage.
• Preventive measures and protection devices must correspond to the regulations inforce (e.g. EN 60204 or EN 50178).
Required preventive measures: Ground the unit
• Take suitable steps to ensure that the preventive measures and protection devicesdescribed in the operating instructions for the individual MOVITRANS® componentshave been implemented correctly.
• With the protective cover removed, the MOVITRANS® units have enclosure IP00.This also applies to the TCS compensation box and the TVS connection distributor.Dangerous voltages are present at all components. All units must be closed duringoperation.
• Safety functions within the unit may cause system standstill. Removing the cause ofthe problem or performing a reset can result in the system re-starting on its own. Ifthis action is not permissible due to reasons of safety, disconnect the TPS10Astationary converter and the TAS10A transformer module from the power supplybefore correcting the fault.
8 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
2 Waste disposal Safety Notes
2.5 Waste disposalPlease follow the current national regulations. Dispose of materials separately in accor-dance with the regulations in force, for example:
• Electronics scrap (circuit boards)
• Plastic (housing)
• Sheet metal
• Copper
• Aluminum
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 9
3 Unit designationUnit Design
3 Unit Design3.1 Unit designation3.1.1 TCS compensation box
The unit designation of the TCS compensation box comprises the following characteris-tic data:
T C S 10 A - E 06 - 0 9 0 - 1Design of the flange plate/connections:1 = 4 x M25, 4 x M253 = 2 x M32, 2 x M32Compensation capacity:090 = 900 nF120 = 1200 nF1K0 = 10,000 nFLine cable current:06 = 60 A08 = 85 A
Enclosure: E = increased enclosure IP65
Version: A
Series and generation: 10 = standard
Type of installation: S = stationary
Component: C = compensation box
Type: T = MOVITRANS
10 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
3 Unit designation Unit Design
3.1.2 TVS connection distributor
The unit designation of the TVS connection distributor comprises the following charac-teristic data:
T F S 10 A - E 08 - 0 0 0 - 1Design of the flange plate/connections:1 = 4 x M25, 2 x M322 = 2 x M32, 2 x M32
Compensation capacity: not installed
Line cable current:06 = 60 A08 = 85 A
Enclosure: E = increased enclosure IP65
Version: A
Series and generation: 10 = standard
Type of installation: S = stationary
Component: V = connection distributor
Type: T = MOVITRANS
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 11
3 Unit designationUnit Design
3.1.3 TLS line cable
The unit designation of the TLS line cable comprises the following characteristic data:
T L S 10 E 016 - 01 - 1Design:1 = Standard2 = with cable lugNumber of single cores:01 = single-core06 = six-coreCable cross section:006 = 6 mm2
008 = 8 mm2
016 = 16 mm2
025 = 25 mm2
041 = 41 mm2
Line cable design: E = round
Series and generation: 10 = standard
Type of installation: S = stationary
Component: L = high-frequency line cable
Type: T = MOVITRANS
12 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
3 Unit designation Unit Design
3.1.4 TIS Installation components
The unit designation of the TIS installation components comprises the following charac-teristic data:
T I S 10 A 0XX - XXX - 0
Design: 0 = standard
Cable bushing:A00 = grommetA74 = Cable bushing 8 mm2
Inlet (in preparation)B00 = Inlet with coverFlexible profile section (cable duct), 2.2 m long:F33 = flexible, installation dimension 33 mmF74 = flexible, installation dimension 74 mmRubber profile (in preparation)G00 = Rubber profileSupport complete (for profile section):H00 = AFT profile 180H01 = Cinetic profile 180H02 = Dürr profile 180, universalRigid profile section (cable duct), 3 m long:P33 = fixed, installation dimension 33 mmP74 = fixed, installation dimension 74 mmInstallation plate (cable jumper)V00 = straight installation plate with coverRetaining plate (for TCS, TVS and TIS10A008-H02-0):H00 = AFT profile 180X01 = Cinetc profile 180X02 = Dürr 180XH2 = Universal
Cable cross section of the line cable:000 = irrelevant008 = 8 mm2
016 = 16 mm2
025 = 25 mm2
041 = 41 mm2
Version: A
Series and generation: 10 = standard
Type of installation: S = stationary
Component: I = Installation equipment
Type: T = MOVITRANS
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 13
3 NameplateUnit Design
3.2 Nameplate3.2.1 TCS compensation box
The following figure shows an example for a TCS compensation box nameplate:
3.2.2 TVS connection distributorThe following figure shows an example for a TVS connection distributor nameplate:
3.3 Scope of delivery3.3.1 TCS compensation box
The following components are included in the scope of delivery for the TCS compensa-tion box:
175682059
175684235
Compensation box Scope of delivery
TCS10A-E0X-XXX-1TCS10A-E0X-XXX-3
• 1 compensation box with with blanking plugs installed• 2 M8 combi pan head screws, each with lock washer and plain washer• 1 M5 combi pan head screw with lock washer and plain washer for
equipotential bonding
14 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
3 Scope of delivery Unit Design
3.3.2 TVS connection distributor
The following components are included in the scope of delivery for the TVS connectiondistributor for line cable currents of 60 A:
The following components are included in the scope of delivery for the TVS connectiondistributor for line cable currents of 85 A:
3.3.3 TLS line cable/supply cableThe following components are included in the scope of delivery for the TLS line cable/supply cable without cable lug:
The following components are included in the scope of delivery for the TLS line cable/supply cable with cable lug at one cable end:
3.3.4 TIS...-V..-0 installation plateThe following components are included in the scope of delivery for the TIS...-V..-0 instal-lation plate:
Connection distributor Scope of delivery
TVS10A-E08-000-1 • 1 connection distributor with 4 M25 blanking plugs and 2 M32 blanking plugs installed
• 1 M5 combi pan head screw with lock washer and plain washer for equipotential bonding
• 8 M6 hex nuts• 8 jumpers
Connection distributor Scope of delivery
TVS10A-E08-000-1TVS10A-E08-000-2
• 1 connection distributor with with blanking plugs installed• 1 M5 combi pan head screw with lock washer and plain washer for
equipotential bonding• 4 M8 hex nuts• 4 jumpers
Line cable/supply cable without cable lug
Scope of delivery
TLS10E006-06-1TLS10E008-01-1TLS10E016-01-1TLS10E025-01-1TLS10E041-01-1
• TLS line cable/supply cable with required length(Specify the required length in meters in your order.)
Line cable with cable lug
Scope of delivery
TLS10E025-01-2TLS10E041-01-2
• TLS line cable with required length and with cable lug at one cable end (Specify the required length in meters in your order.)
• 1 cable lug for connection to M8 terminal studs
Installation plate Scope of delivery
TIS10A025-V00-0 • 1 installation plate with cover• 6 rubber studs
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 15
3 Scope of deliveryUnit Design
3.3.5 TIS...-X..-0 retaining plate
The following components are included in the scope of delivery for the TIS...-X..-0 re-taining plate:
3.3.6 TIS...-H..-0 holding fixture for the profile sectionThe following components are included in the scope of delivery for the TIS...-H..-0 hold-ing fixture for the profile section:
3.3.7 TIS...-P..-0/TIS...-F..-0 profile sectionThe following components are included in the scope of delivery for the rigid TIS...-P..-0profile section:
The following components are included in the scope of delivery for the flexible TIS...-F..-0 profile section:
3.3.8 TIS...-A..-0 cable bushingThe following components are included in the scope of delivery for the TIS...-A..-0 cablebushing:
Retaining plate Scope of delivery
TIS10A008-X00-0 • 1 retaining plate with 2 M6x25 socket head screws, Matching AFT aluminum profile rail 180
TIS10A008-X01-0 • 1 retaining plate with 2 M6x25 socket head screws, Matching Cinetic aluminum profile rail 180
TIS10A008-X02-0 • 1 retaining plate with 2 M6x25 socket head screws, Matching Dürr aluminum profile rail 180
TIS10A008-XH2-0 • 1 universal retaining plate for mounting the TIS10A008-H02-0 (universal) holding fixture
Fixture Scope of delivery
TIS10A008-H00-0 • 1 holding fixture with 2 rotary supports, Matching AFT aluminum profile rail 180
TIS10A008-H01-0 • 1 holding fixture with 2 rotary supports, Matching Cinetic aluminum profile rail 180
TIS10A008-H02-0 • 1 (universal) holding fixture with 2 rotary supports, matching Dürr aluminum profile rail 180 and TIS10A008-XH2-0 universal retaining plate
Fixture Scope of delivery
TIS10A008-P33-0 • 1 rigid profile section, installation dimension 33 mm, 3 m long
TIS10A008-P74-0 • 1 rigid profile section, installation dimension 74 mm, 3 m long
Fixture Scope of delivery
TIS10A008-F33-0 • 1 flexible profile section, installation dimension 33 mm, 2.2 m long
TIS10A008-F74-0 • 1 flexible profile section, installation dimension 74 mm, 2.2 m long
Cable opening: Scope of delivery
TIS10A008-A00-0 • 1 cable bushing grommet
TIS10A008-A74-0 • 1 cable entry frame for line cable 8 mm2
16 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
3 TCS compensation box Unit Design
3.4 TCS compensation box3.4.1 Design
The following figure shows the TCS compensation box:
Blanking plugs The following table shows the number and size of the blanking plugs:
Other capacities are available on request.
3.4.2 FunctionThe TCS compensation box is used to compensate the track inductance.
175877771
[1] TCS10A compensation box[2] Flange plate 1/2[3] PE connection (M5)
[2][3] [2] [3][1]
Compensation box typeNumber and size of blanking plugs
Flange plate 1 Flange plate 2
TCS10A-E06-090-14 x M25 4 x M25
TCS10A -E08-120-1
TCS10A -E08-120-2 2 x M32 2 x M32
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 17
3 TVS connection distributorUnit Design
3.5 TVS connection distributor3.5.1 Design
The following table shows the TVS connection distributor:
Blanking plugs
3.5.2 FunctionThe TVS connection distributor is used to
• connect the TLS supply cable (supply cabinet → energy transmission line).
• Couple the line cables to the power transmission system.
175879947
[1] TVS10A connection distributor[2] Flange plate 1[3] Flange plate 2[4] PE connection (M5)
[3][4] [2] [4][1]
Connection distributor typeNumber and size of blanking plugs
Flange plate 1 Flange plate 2
TVS10A-E08-000-12 x M32 4 x M25
TVS10A-E08-000-1
TVS10A-E08-000-2 2 x M32 2 x M32
18 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
3 TLS line cable and supply cable Unit Design
3.6 TLS line cable and supply cable3.6.1 Design
The following shows the TLS line cable/supply cable:
3.6.2 FunctionTLS10E008-01-1 line cable:
• Medium-frequency cable for THM pick-up
• Laid as current loops in plastic profile
TLS10E016-01-1 line cable:
• Medium-frequency cable for THM pick-up
• Laid in or on the floor
TLS10E025-01-1/TLS10E041-01-1 line cable:
• Medium-frequency cable for THM pick-up
• Laid as current loops in or on the floor
TLS10E006-06-1 supply cable:
• Fine litz wires as supply cable from supply cabinet → power transmission system
• Fixed installation, e.g. in cable duct or as a cable carrier application
170532875
[1] TLS10E008-01-1 line cable (cable cross section 8 mm2)[2] TLS10E016-01-1 line cable (cable cross section 16 mm2)[3] TLS10E025-01-1/TLS10E041-01-1 line cable (cable cross section 25/41 mm2)[4] TLS10E006-06-1 supply cable (cable cross section 6 × 6mm2)
[1]
[2]
[3]
[4]
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 19
3 TIS10...-V..-0 installation plateUnit Design
3.7 TIS10...-V..-0 installation plate3.7.1 Design
The following figure shows the TIS...-V..-0 installation plate:
3.7.2 FunctionThe TIS installation plates are mounted to the floor along the straight transmission line.The TLS line cable with a 25 mm2 cross section and a 60 A or 85 A line cable current isinserted into the TIS installation plate.
463039883
[1] TIS10A025-V00-0 installation plate[2] Cover[3] Rubber studs
[3]
[2]
[1]
20 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
3 TIS...-X..-0 Retaining plate Unit Design
3.8 TIS...-X..-0 Retaining plate 3.8.1 Design
The following figure shows the TIS...-X..-0 retaining plate:
3.8.2 FunctionThe TIS...-X..-0 retaining plate is used to mount a TCS compensation box or a TVS con-nection distributor to an aluminum profile rail. There are correspondingly adjusted retain-ing plates available for the different aluminum profiles. The TIS...-X..-0 retaining plate isdelivered with two M6x25 socket head screws.
The TIS...-XH2-0 universal retaining plate is used to mount the TIS...-H02-0 (universal)holding fixture to an aluminum or steel construction.
169932043
[1] TIS10A008-X00-0 retaining plate matching AFT aluminum profile rail 180[2] TIS10A008-X01-0 retaining plate matching Cinetic aluminum profile rail 180[3] TIS10A008-X02-0 retaining plate matching Dürr aluminum profile rail 180[4] TIS10A008-XH2-0 universal retaining plate for mounting the TIS10A008-H02-0 (universal) holding fix-
ture
[2][1] [3] [4]
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 21
3 TIS...-H..-0 holding fixtureUnit Design
3.9 TIS...-H..-0 holding fixture3.9.1 Design
The following figure shows the TIS...-H..-0 holding fixture:
3.9.2 FunctionThe TIS10A...-H..-0 holding fixture is used to carry the TIS...-P..-0/TIS...-F..-0 profilesection.
169906443
[1] TIS10A008-H00-0 holding fixture matching AFT profile 180[2] TIS10A008-H01-0 holding fixture matching Cinetic profile 180[3] TIS10A008-H02-0 (universal) holding fixture matching Dürr profile 180 and TIS10A008-XH2-0 univer-
sal retaining plate
[2][1] [3]
22 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
3 TIS...P..-0 rigid profile section Unit Design
3.10 TIS...P..-0 rigid profile section3.10.1 Design
The following figure shows the TIS...-P..-0 rigid profile section:
3.10.2 FunctionThe TIS...-P..-0 profile section (cable duct) in rigid design supports the TLS line cablepreferably for straight sections.
169925515
[1] TIS10A008-P33-0 rigid profile section[2] TIS10A008-P74-0 rigid profile section
[2]
[1]
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 23
3 TIS...-F..-0 flexible profile sectionUnit Design
3.11 TIS...-F..-0 flexible profile section3.11.1 Design
The following figure shows the TIS...-F..-0 flexible profile section:
3.11.2 FunctionThe profile section TIS...-F..-0 in flexible design supports the TLS line cable preferablyfor curved sections.
175688587
[1] TIS10A008-F33-0 flexible profile section [2] TIS10A008-F74-0 flexible profile section
[2]
[1]
24 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
3 TIS...-A..-0 cable bushing Unit Design
3.12 TIS...-A..-0 cable bushing3.12.1 Design
3.12.2 FunctionThe cable bushing TIS...-A..-0 is used when the transmission line has to be interrupted.
A transmission line is interrupted:
• in the point area of a transmission line.
• in case of connection to a TCS compensation box or an TVS connection distributor.
• at the end of a transmission line (track termination).
169929867
[1] TIS10A008-A00-0 cable bushing grommet[2] TIS10A008-A74-0 cable bushing frame for line cable 8 mm2
[1] [2]
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 25
4 Prefabricating the TLS Line CableInstallation
4 Installation4.1 Prefabricating the TLS Line Cable4.1.1 Tools
The following figure shows suitable tools for the prefabrication of the TLS line cables:
170535051
[1] Diagonal cutter [4] Soldering pot with solder[2] Knife [5] Hatchet-type soldering iron with solder[3] Shrink tubing [6] Vise
[1]
[3]
[4]
[5]
[2]
[6]
26 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
4 Prefabricating the TLS Line Cable Installation
4.1.2 Cable type
The TLS line cables are medium-frequency cables. The core of the medium-frequencycable consists of numerous thin wires that are insulated from each other by a coating.
4.1.3 ProcedureThe TLS line cable ends are soldered to a cable lug during prefabrication. Do not pressthe cable lugs!We recommend a soldering pot and a hatchet-type soldering iron for soldering the cablelugs.
To prefabricate the TLS line cables proceed as follows:
1. Push the shrinking tube over the cable end.
2. Mark the length to be stripped.
3. Remove the insulation at the end of the cable.
4. Remove the insulation (coating) of the individual wires and solder the cable lug.Here, you have the following options:
170085387
170087563
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 27
4 Prefabricating the TLS Line CableInstallation
A With a hatchet-type soldering iron (suitable for line cable cross sections of8 mm2):
• Pour the solder into the cable lug to halfway.
• Insert the stripped cable end in the cable lug.
• Heat the cable lug with the hatchet-type soldering iron until the insulation ofthe individual wires melts and leaks out of the cable lug as brown waste.
B With a soldering pot and a hatchet-type soldering iron:
• Hold the stripped cable end in the soldering pot until the insulation of the indi-vidual wires melts and floats to the top of the soldering cup.
• Pour the solder into the cable lug to halfway.
• Insert the cable end in the cable lug.
• Heat the cable lug with the hatchet-type soldering iron again.
C With a gas flame:
• Pour the solder into the cable lug to halfway.
• Insert the stripped cable end in the cable lug.
• Heat the cable lug with the gas flame until the insulation of the individual wiresmelts and leaks out of the cable lug as brown waste.
170530699
532537227
28 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
4 Prefabricating the TLS supply cable Installation
Make sure that the insulation of the individual wires leaks out of the cable lug duringsoldering! This is essential for a good connection with low contact resistance.
5. Push the shrinking tube over the soldering point.
6. Heat the shrink tubing until it closes tightly around the soldering point.
4.2 Prefabricating the TLS supply cable4.2.1 Cable type
The TLS supply cable is a six-core cable. There are 3 blue cores and 3 black ones. Inthe supply cable, the conductor wires are not insulated against one another. Three coresof the same color are used as outgoing cables or return cables.
4.2.2 ProcedureTo prefabricate the TLS supply cable proceed as follows:
1. Using a standard tool, press each core end together with a ring cable lug. For cablelug types, refer to section "Technical data/TLS line cable/TLS supply cable" (page37)
170091915
170089739
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 29
4 Connecting the TLS line cable to the TCS compensation boxInstallation
4.3 Connecting the TLS line cable to the TCS compensation box4.3.1 Procedure
For the connection of the TLS line cable to the TCS compensation box, proceed as fol-lows:
1. Remove the blanking plugs according to the number of line cables to be connected.
2. Insert the correct number of M25/M32 cable glands in place of the blanking plugs.
3. Open the compensation box by removing the four M5 hex head screws from thehousing cover.
4. Insert the prefabricated line cable through the cable gland into the wiring space of thecompensation box.
5. Connecting the TLS line cable to the TCS:
– Remove the two M8 combi pan head screws from the connector plate of thecompensation box.
– Connect the line cables prefabricated with cable lugs to the terminal studs. Screwthe two combi pan head screws back into the terminal studs. The line cables arenow in place.
The following figure shows the line cable connected to the compensation box:
6. Install the housing cover again using the four M5 hex head screws.
463276683
30 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
4 Connecting the TLS line cable to the TVS connection distributor Installation
4.4 Connecting the TLS line cable to the TVS connection distributor4.4.1 Procedure
For the connection of the TLS line cable to the TVS connection distributor, proceed asfollows:
1. Remove the blanking plugs according to the number of line cables to be connected.
2. Insert the correct number of M25/M32/M40 cable glands in place of the blankingplugs.
3. Open the connection distributor. by removing the four M5 hex head screws from thehousing cover.
4. Insert the prefabricated line cable through the cable gland into the wiring space of theconnection distributor.
5. Connecting the TLS line cable to the TVS:
– On the terminal board, unscrew the M6 hex nuts from the connection stud bolts.The number of nuts to be removed depends on the number of cable lines to beconnected.
– Connect the jumpers according to the circuit diagram.
– Connect the line cables prefabricated with cable lugs to the connection stud boltson the terminal board. Screw the M6 hex nuts back onto the connection stud bolts.The line cables are now in place.
The following figure shows the line cable connected to the connection distributor:
60 A
85 A
6. Install the housing cover again using the four M5 hex head screws.
169919499
169921675
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 31
4 Connecting the TLS supply cable to the TVS connection distributorInstallation
4.5 Connecting the TLS supply cable to the TVS connection distributor4.5.1 Procedure
For the connection of the TLS supply cable to the TVS connection distributor, proceedas follows:
1. Remove one blanking plug (M32) from the connection distributor.
2. Insert an M32 cable gland in place of the blanking plug.
3. Open the connection distributor. by removing the four M5 hex head screws from thehousing cover.
4. Press a ring cable lug (6 mm2 with 6 mm hole) onto each of the six cores of the supplycable.
5. Insert the supply cable that is prefabricated with cable lugs through the cable glandand into the wiring space of the connection distributor.
6. Connecting the TLS supply cable to the TVS:
– On the terminal board, unscrew the M6 hex nuts from the connection stud bolts.The number of nuts to be removed depends on the number of cable lines to beconnected.
– Connect the jumpers according to the circuit diagram.
– Connect three cores of the supply cable that are the same color, prefabricatedwith cable shoes, to the connection stud bolts on the terminal board. Screw theM6 hex nuts back onto the connection stud bolts. The supply cable is now inplace.
7. Install the housing cover again using the four M5 hex head screws.
32 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
4 Grounding the TCS compensation box/TVS connection distributor Installation
4.6 Grounding the TCS compensation box/TVS connection distributor4.6.1 Guidelines
Please comply with following directives when grounding the TCS compensation box andthe TVS connection distributor:
• Ground the unit by the shortest possible route.
• Use a green and yellow grounding cable.
4.6.2 ProcedureProceed as follows to ground the TCS compensation box and the TVS connection dis-tributor:
1. Connect the ground connection (cable cross section 16mm2) to the local ground po-tential (e.g. to an aluminum rail of overhead trolley systems)
494901515
[1] Flange plate (different connections depending on type)[2] Ground connection
[1] [2]
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 33
4 Installing the TIS10A008... equipment V1Installation
4.7 Installing the TIS10A008... equipment V14.7.1 Guidelines
The TIS10A008.. installation equipment (Holding fixtures, profile sections, retainingplates, cable bushings) is suitable for the mounting on aluminum profile rails (e.g. over-head trolley systems) or universal mounting on machines. A shielding plate must beused for the mounting on a steel construction.
Please comply with the following directives for the mounting on aluminum profile railsand universal installation:
• Following TIS...-H..-0 holding fixtures are required for the secure mounting of theTIS...-P..-0/TIS...-F..-0 profile sections:
– for straight tracks with a TIS...-PXX-0 rigid profile section: 2 pieces/meter
– for curves with a TIS...-FXX-0 flexible profile section: 3 pieces/meter
4.7.2 ProcedureFor the mounting on aluminum profile rails and universal mounting, proceed as follows:
1. Insert the TIS...-H..-0 holding fixtures into the aluminum profile rail (or into the TIS...-XH2-0 universal retaining plate for universal mounting).
Mount one holding fixture at the start and one at the end for each transmission line.On straight tracks, there is a distance of 50 cm between the holding fixtures. In,curves there is a distance of 30 cm.
2. Please ensure that all of the holding fixtures' screw plugs are open.
3. Press the TIS...-P..-0/TIS...-F..-0 profile sections into the TIS...-H..-0 holding fixturesuntil they snap (see fig.[A]).
4. Adjust the TIS...-P..-0/TIS...-F..-0 profile sections
5. Close the TIS...-H..-0 holding fixtures' screw plugs (see fig. [B]).
Mounting on alumi-num profile rail
The following figure shows the TIS10A008...installation equipment mounted on an alu-
170157707
[1] Aluminum profile rail (for universal mounting: construction with TIS10A-008-XH2-0 universal retaining plate)
[2] TIS...-H..-0 holding fixture[3] Rotary support[4] TIS...-P..-0/TIS...-F..-0 profile section
[A] [B]
[2][1] [4][3] [2][1] [4][3]
34 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
4 Installing the TIS10A008... equipment V1 Installation
minum profile rail:
Installation dimen-sion
The following figure shows the installation dimension of the installed profile section sys-tem:
[1]
[2]
[3] [4] [5] [8][9] [6] [7] [9]
[A]
[B]
169915147
[A] Mounting of a TCS compensation box/TVS connection distributor[B] Mounting of the entire TIS profile section system
[1] TIS10A008-X...-0 retaining plate matching aluminum profile rail[2] TIS10A008-A00-0 cable bushing grommet[3] TIS10A008-A74-0 cable bushing frame for line cable 8 mm2
[4] TIS10A008-H...-0 holding fixture matching aluminum profile rail[5] TIS10A008-P74-0 rigid profile section[6] TIS10A008-P33-0 rigid profile section[7] TIS10A008-F33-0 flexible profile section [8] TIS10A008-F74-0 flexible profile section [9] Aluminum profile rail (not included in the scope of delivery)
169917323
[A] Installation dimension for AFT profile 180 with matching holding fixture (...H00-0) and profile section[B] Installation dimension for Cinetic profile 180 with matching holding fixture (...H01-0) and profile sec-
tion[C] Installation dimension for Dürr profile 180 with matching holding fixture (...H02-0) and profile section
33
74
[A] [B] [C]
33
74
33
74
180
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 35
4 Installing the TIS10A008... equipment V1Installation
Universal mount-ing
The following figure shows the TIS10A008...installation equipment mounted on an alu-minum construction and a steel construction:
169936395
[2]
[1]
[A]
[9][3][4]
[7]
[5][6]
[9]
[3]
[4]
[7][8]
[5][6]
[B]
[A] Mounting on an aluminum construction[B] Mounting on a steel construction
[1] TIS10A008-A00-0 cable bushing grommet[2] TIS10A008-A74-0 cable bushing frame for line cable 8 mm2
[3] TIS10A008-H02-0 (universal) holding fixture matching Dürr aluminum profile rail 180 and TIS10A008-XH2-0 universal retaining plate
[4] TIS10A008-P74-0 rigid profile section[5] TIS10A008-P33-0 rigid profile section[6] TIS10A008-F33-0 flexible profile section [7] TIS10A008-F74-0 flexible profile section [8] Shielding plate for mounting on a steel construction (not included in the delivery)[9] TIS10A-008-XH2-0 universal retaining plate for TIS10A008-H02-0 (universal) holding fixture
36 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
4 Installing the TIS10A008... equipment V1 Installation
Installation dimen-sion
The following figure shows the installation dimension of the installed profile section sys-tem with a TIS10008-XH2-0 retaining plate for the TIS10A008-H02-0 (universal) holdingfixture:
169942923
[A] Installation dimension for mounting on aluminum construction[B] Installation dimension for mounting on steel construction with shielding plate
74
33
74
120
33
[A] [B]
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 37
5 CertificationsTechnical Data
5 Technical Data5.1 Certifications
The following table shows the valid certifications for the MOVITRANS®® equipment:
5.2 TLS line cable/supply cableThe following table shows the mechanical properties of the TLS line cable/supply cable:
The following table shows the electrical properties of the TLS line cable/supply cable:
Component Type Approval
Supply cable TLS10E006-06-1 UL, CSA
Line cable TLS10E008-01-1 UL
Line cable TLS10E016-01-1 UL
Line cable TLS10E025-01-1 UL
Line cable TLS10E041-01-1 UL
Profile section TIS10A...-P..-0/TIS...-F..-0 UL94-V0
Holding fixtures for profile sec-tion TIS10A...-H..-0 UL94-V0 E, UL94-V0
Cable bushing frame TIS10A...-A..-0 UL94-V0
Line cable type Cable cross sec-tion
Outer diameter Installation type Bending radius
[mm2] [mm] [mm]
TLS10E006-06-1 6 × 6 20.5 ± 0.3 Fixed or flexible 80
TLS10E008-01-1 8 8.6 ± 0.3
Fixed
35
TLS10E016-01-1 16 10.9 ± 0.3 40
TLS10E025-01-1 25 12.5 ± 0.4 45
TLS10E041-01-1 41 15 ± 0.4 60
Line cable type Insulation / sheathing material
Electrical cable losses Operating voltage
[mm2] [W/track meter] [V]
TLS10E006-06-1
Thermoplast /Polyurethane
15 (at 60 A)1000600
TLS10E008-01-1 13 (at 60 A)(2 parallel cables)
1000
TLS10E016-01-1 20 (at 60 A) 1000
TLS10E025-01-1 13 (at 60 A)25 (at 85 A)
1000
TLS10E041-01-1 15 (at 85 A) 1000
Pi
fkVA
Hz
n
38 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
5 TLS line cable/supply cable Technical Data
The following table shows the data for the connection of the TLS line cable/supply cableto the TCS compensation box/TAS transformer module (4 kW) with M8 terminal studs:
The following table shows the data for the connection of the TLS line cable/supply cableto the TVS connection distributor with M6 terminal studs:
The following table shows the data for the connection of the TLS line cable/supply cableto the TAS transformer module (16 kW) with M10 terminal studs:
Line cable type Cable lug Use Cable gland Clamping area
Type Width [mm] (Plastic) [mm]
TLS10E006-06-1 Klauke 1R/8 15 TAS10A (4 kW)
- -
TLS10E008-01-1 Klauke 3R/8 15 TCS10A M20 8 ... 13
TLS10E016-01-1 Klauke 4R/8 16 TCS10ATAS10A (4 kW)
M25 11 ... 17TLS10E025-01-1 Klauke 5R/817
TLS10E041-01-1 Klauke 6SG/8
Line cable type Cable lug Cable gland Clamping area
Type Width [mm] (Plastic) [mm]
TLS10E006-06-1 Klauke 1R/6 12 M32 15 ... 25
TLS10E008-01-1 Klauke 3R/6 12 M20 8 ... 13
TLS10E016-01-1 Klauke 4R/6 14
M25 11 ... 17TLS10E025-01-1 Klauke 5SG/615
TLS10E041-01-1 Klauke 6SG/6
Type Cable lug
Type Width [mm]
TLS10E006-06-1 Klauke 1R/10 17
TLS10E016-01-1 Klauke 4R/10 18
TLS10E025-01-1 Klauke 5R/1019
TLS10E041-01-1 Klauke 6SG/10
Pi
fkVA
Hz
n
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 39
5 DocumentationTechnical Data
5.3 Documentation 5.3.1 Available documentation
The following publications are available for contactless energy transfer withMOVITRANS®:
A folder containing all the publications above is available on request:
5.3.2 Additional documentationIn addition to the instructions listed above, SEW-EURODRIVE offers extensive docu-mentation covering the entire topic of electrical drive engineering. These are mainly thepublications of the "Drive Engineering - Practical Implementation" series as well as themanuals and catalogs for electronically controlled drives.
A wide selection of our documentation is available in many languages for download onour website (www.sew-eurodrive.de). If required, you can also order printed andbound copies of the documentation from SEW-EURODRIVE.
Publications Number
German English
System DescriptionMOVITRANS®
11626208Edition 06/2007
11626216Edition 06/2007
Operating InstructionsMOVITRANS® TPS10A Stationary Converter
11304804Edition 09/2004
11304812Edition 09/2004
Operating InstructionsMOVITRANS® TAS10A Transformer Module
11306904Edition 09/2004
11306912Edition 09/2004
Operating InstructionsMOVITRANS® THM10C / THM10E Pick-ups
11445009Edition 07/2006
11445017Edition 072006
Operating InstructionsMOVITRANS® TPM12B Mobile Converter
11445408Edition 07/2006
11445416Edition 072006
Operating InstructionsMOVITRANS® TCS, TVS, TLS, TIS Installation Equipment
11516208 Edition 06/2007
11516216Edition 06/2007
ManualMOVITRANS® Project Planning
11493801Edition 06/2007
11493828Edition 06/2007
ManualMOVITRANS® Installation Transmission Lines for THM10E Pick-ups
11472618Edition 06/2007
11472626Edition 06/2007
ManualMOVITRANS® SHELL TPS Startup Software
11272708Edition 10/2004
11272716Edition 10/2004
Compilation of publications Number
German English
System ManualMOVITRANS®
11637803Edition 09/2007
11637811Edition 09/2007
Pi
fkVA
Hz
n
40 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
6 TCS10A compensation box Dimension Sheets
6 Dimension Sheets6.1 TCS10A compensation box
The following figure shows the dimension sheet of the TCS10A compensation box, di-mensions in mm:
6.1.1 TCS...-1 blanking plugsThe following figure shows the dimension sheet of the TCS...-1 blanking plugs, dimen-sions in mm:
457280523
[A] Flange plate 1[B] Flange plate 2
210
227
240
6,5
76 10
0
10
0
11
5,5
5
[A] [B]
175690763
[A] Flange plate 1[B] Flange plate 2
80
35
38
(4x) M25 x 1,5
[A]
(4x)
M25 x
1,5
80
35
38
[B]
Pi
fkVA
Hz
n
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 41
6 TVS10A connection distributorDimension Sheets
6.1.2 TCS...-3 blanking plugs
The following figure shows the dimension sheet of the TCS...-3 blanking plugs, dimen-sions in mm:
6.2 TVS10A connection distributorThe following figure shows the dimension sheet of the TVS connection distributor, di-mensions in mm:
175692939
[A] Flange plate 1[B] Flange plate 2
[A] [B]
80
45
(2x) M32 x 1,5
80
45
(2x) M
32 x 1,5
457280523
[A] Flange plate 1[B] Flange plate 2
210
227
240
6,5
76 10
0
10
0
11
5,5
5
[A] [B]
Pi
fkVA
Hz
n
42 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
6 TVS10A connection distributor Dimension Sheets
6.2.1 TVS...-1 blanking plugs
The following figure shows the dimension sheet of the TVS...-1 blanking plugs, dimen-sions in mm:
6.2.2 TVS...-2 blanking plugsThe following figure shows the dimension sheet of the TVS...-2 blanking plugs, dimen-sions in mm:
175679883
[A] Flange plate 1[B] Flange plate 2
[A] [B]
75
40
32
(2x) M32 x 1,5
35
80
38
(4x)
M25 x
1,5
175692939
[A] Flange plate 1[B] Flange plate 2
[A] [B]
80
45
(2x) M32 x 1,5
80
45
(2x) M
32 x 1,5
Pi
fkVA
Hz
n
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 43
6 TIS...-V..-0 installation plateDimension Sheets
6.3 TIS...-V..-0 installation plate6.3.1 TIS10A025-V00-0 installation plate
The following figure shows the dimension sheet of the TIS10A025-V00-0 installationplate, dimensions in mm:
The following figure shows the dimension sheet of the cover of the TIS10A025-V00-0installation plate, dimensions in mm:
206384907
206387083
500
340
250
240
140
500
350
250
100
28
25
17
15
Ø 1
4Ø
18
350
500
3
25
0
37
7
Pi
fkVA
Hz
n
44 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
6 TIS...-X..-0 Retaining plate Dimension Sheets
6.4 TIS...-X..-0 Retaining plate6.4.1 TIS10A008-X00-0 retaining plate
The following figure shows the dimension sheet of the TIS10A008-X00-0 retaining plate(matching the ATF profile 180), dimensions in mm:
6.4.2 TIS10A008-X01-0 retaining plateThe following figure shows the dimension sheet of the TIS10A008-X01-0 retaining plate(matching the Cinetic profile 180), dimensions in mm:
170118027
109,5
92,5
76
18
16
5,7
5
Ø5,5M6
170120203
151
76
Ø5,5M6
92,6
114,9
134,4
25
12
,5
1,4
Pi
fkVA
Hz
n
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 45
6 TIS...-X..-0 Retaining plateDimension Sheets
6.4.3 TIS10A008-X02-0 retaining plate
The following figure shows the dimension sheet of the TIS10A008-X02-0 retaining plate(matching the Dürr profile 180), dimensions in mm:
6.4.4 TIS10A008-XH2-0 universal retaining plateThe following figure shows the dimension sheet of the TIS10A008-XH2-0 universal re-taining plate (matching the TIS10A008-H02-0 holding fixture), dimensions in mm:
169923851
25
15
,3
4,6
154
76
Ø5,5M6
92,6
120,6
139,4
169934219
45
45
60
75
130
145
154
Ø5.5
Pi
fkVA
Hz
n
46 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
6 TIS...-H..-0 holding fixture Dimension Sheets
6.5 TIS...-H..-0 holding fixture6.5.1 TIS10A008-H00-0 holding fixture
The following figure shows the dimension sheet of the TIS10A008-H00-0 holding fixture(matching the ATF profile 180), dimensions in mm:
6.5.2 TIS10A008-H01-0 holding fixtureThe following figure shows the dimension sheet of the TIS10A008-H01-0 holding fixture(matching the Cinetic profile 180), dimensions in mm:
6.5.3 TIS10A008-H02-0 holding fixtureThe following figure shows the dimension sheet of the TIS10A008-H02-0 holding fixture(matching the Dürr profile 180 and the universal retaining plate), dimensions in mm:
170125067
50
120
100
160
14
40
19
23
170127243
50
100
152
128
40
14
19
170122891
50
120
100
153,6
40
11
14
19
Pi
fkVA
Hz
n
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 47
6 TIS...-P..-0 rigid profile sectionDimension Sheets
6.6 TIS...-P..-0 rigid profile section6.6.1 TIS10A008-P33-0 profile section
The following figure shows the dimension sheet of the TIS10A008-P33-0 profile section,dimensions in mm:
6.6.2 TIS10A008-P74-0 profile sectionThe following figure shows the dimension sheet of the TIS10A008-P74-0 profile section,dimensions in mm:
6.7 TIS...-F..-0 flexible profile section6.7.1 TIS10A008-F33-0 profile section
The following figure shows the dimension sheet of the TIS10A008-F33-0 profile section,dimensions in mm:
170129419
15,45 3000+50
18,1
170131595
3000+5015,09
59,4
7
170111499
2200
4
37,29 54x39,29
15,45
11
,15
18
,1
Pi
fkVA
Hz
n
48 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
6 TIS...-A..-0 cable bushing Dimension Sheets
6.7.2 TIS10A008-F74-0 profile section
The following figure shows the dimension sheet of the TIS10A008-F74-0 profile section,dimensions in mm:
6.8 TIS...-A..-0 cable bushing6.8.1 TIS10A008-A00-0 cable bushing grommet
The following figure shows the dimension sheet of the TIS10A008-A00-0 cable bushinggrommet, dimensions in mm:
170113675
2200
4
40,82 54x39,29
50
15,09
59,4
7
170109323
Ø13
Ø9,5
Ø17,5
3
8
14
Pi
fkVA
Hz
n
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 49
6 Shielding plateDimension Sheets
6.8.2 TIS10A008-A74-0 cable bushing frame
The following figure shows the dimension sheet of the TIS10A008-A74-0 cable bushingframe, dimensions in mm:
6.9 Shielding plateThe shielding plate is not included in the scope of delivery. The shielding plate must bemade of aluminum.
The following figure shows the dimension sheet of the shielding plate dimensions in mm:
170115851
74
8,5
Ø11,8
14 35
70,5
55,5
Ø11,8
169940747
Ø 5
.5
Ø 1
0.5
220
150
130
220
220
500
720
975
1000
60
60
R15
90°
90°
3
120
Pi
fkVA
Hz
n
50 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
7 Shielding plate Address List
7 Address ListGermany
HeadquartersProductionSales
Bruchsal SEW-EURODRIVE GmbH & Co KGErnst-Blickle-Straße 42 D-76646 BruchsalP.O. BoxPostfach 3023 • D-76642 Bruchsal
Tel. +49 7251 75-0Fax +49 7251 75-1970http://[email protected]
Service Compe-tence Center
Central SEW-EURODRIVE GmbH & Co KGErnst-Blickle-Straße 1 D-76676 Graben-Neudorf
Tel. +49 7251 75-1710Fax +49 7251 [email protected]
North SEW-EURODRIVE GmbH & Co KGAlte Ricklinger Straße 40-42 D-30823 Garbsen (near Hannover)
Tel. +49 5137 8798-30Fax +49 5137 [email protected]
East SEW-EURODRIVE GmbH & Co KGDänkritzer Weg 1D-08393 Meerane (near Zwickau)
Tel. +49 3764 7606-0Fax +49 3764 [email protected]
South SEW-EURODRIVE GmbH & Co KGDomagkstraße 5D-85551 Kirchheim (near München)
Tel. +49 89 909552-10Fax +49 89 [email protected]
West SEW-EURODRIVE GmbH & Co KGSiemensstraße 1D-40764 Langenfeld (near Düsseldorf)
Tel. +49 2173 8507-30Fax +49 2173 [email protected]
Electronics SEW-EURODRIVE GmbH & Co KGErnst-Blickle-Straße 42 D-76646 Bruchsal
Tel. +49 7251 75-1780Fax +49 7251 [email protected]
Drive Service Hotline / 24 Hour Service +49 180 5 SEWHELP+49 180 5 7394357
Additional addresses for service in Germany provided on request!
France
ProductionSalesService
Haguenau SEW-USOCOME 48-54, route de Soufflenheim B. P. 20185F-67506 Haguenau Cedex
Tel. +33 3 88 73 67 00 Fax +33 3 88 73 66 00http://[email protected]
Production Forbach SEW-EUROCOME Zone Industrielle Technopôle Forbach SudB. P. 30269F-57604 Forbach Cedex
Tel. +33 3 87 29 38 00
AssemblySalesService
Bordeaux SEW-USOCOME Parc d'activités de Magellan62, avenue de Magellan - B. P. 182F-33607 Pessac Cedex
Tel. +33 5 57 26 39 00Fax +33 5 57 26 39 09
Lyon SEW-USOCOME Parc d'Affaires RooseveltRue Jacques TatiF-69120 Vaulx en Velin
Tel. +33 4 72 15 37 00Fax +33 4 72 15 37 15
Paris SEW-USOCOME Zone industrielle 2, rue Denis Papin F-77390 Verneuil I'Etang
Tel. +33 1 64 42 40 80Fax +33 1 64 42 40 88
Additional addresses for service in France provided on request!
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 51
7 Shielding plateAddress List
Algeria
Sales Alger Réducom 16, rue des Frères ZaghnounBellevue El-Harrach16200 Alger
Tel. +213 21 8222-84Fax +213 21 8222-84
Argentina
AssemblySalesService
Buenos Aires SEW EURODRIVE ARGENTINA S.A.Centro Industrial Garin, Lote 35Ruta Panamericana Km 37,51619 Garin
Tel. +54 3327 4572-84Fax +54 3327 [email protected]
Australia
AssemblySalesService
Melbourne SEW-EURODRIVE PTY. LTD.27 Beverage DriveTullamarine, Victoria 3043
Tel. +61 3 9933-1000Fax +61 3 9933-1003http://[email protected]
Sydney SEW-EURODRIVE PTY. LTD.9, Sleigh Place, Wetherill Park New South Wales, 2164
Tel. +61 2 9725-9900Fax +61 2 [email protected]
Townsville SEW-EURODRIVE PTY. LTD.12 Leyland StreetGarbutt, QLD 4814
Tel. +61 7 4779 4333Fax +61 7 4779 [email protected]
Austria
AssemblySalesService
Wien SEW-EURODRIVE Ges.m.b.H. Richard-Strauss-Strasse 24A-1230 Wien
Tel. +43 1 617 55 00-0Fax +43 1 617 55 00-30http://[email protected]
Belarus
Sales Minsk SEW-EURODRIVE BYRybalkoStr. 26BY-220033 Minsk
Tel.+375 (17) 298 38 50Fax +375 (17) 29838 [email protected]
Belgium
AssemblySalesService
Brüssel SEW Caron-Vector S.A.Avenue Eiffel 5B-1300 Wavre
Tel. +32 10 231-311Fax +32 10 231-336http://[email protected]
Brazil
ProductionSalesService
Sao Paulo SEW-EURODRIVE Brasil Ltda.Avenida Amâncio Gaiolli, 50Caixa Postal: 201-07111-970Guarulhos/SP - Cep.: 07251-250
Tel. +55 11 6489-9133Fax +55 11 6480-3328http://[email protected]
Additional addresses for service in Brazil provided on request!
Bulgaria
Sales Sofia BEVER-DRIVE GmbHBogdanovetz Str.1BG-1606 Sofia
Tel. +359 2 9151160Fax +359 2 [email protected]
Cameroon
Sales Douala Electro-ServicesRue Drouot AkwaB.P. 2024Douala
Tel. +237 33 431137Fax +237 33 431137
52 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
7 Shielding plate Address List
Canada
AssemblySalesService
Toronto SEW-EURODRIVE CO. OF CANADA LTD. 210 Walker Drive Bramalea, Ontario L6T3W1
Tel. +1 905 791-1553Fax +1 905 791-2999http://[email protected]
Vancouver SEW-EURODRIVE CO. OF CANADA LTD.7188 Honeyman Street Delta. B.C. V4G 1 E2
Tel. +1 604 946-5535Fax +1 604 [email protected]
Montreal SEW-EURODRIVE CO. OF CANADA LTD.2555 Rue Leger LaSalle, Quebec H8N 2V9
Tel. +1 514 367-1124Fax +1 514 [email protected]
Additional addresses for service in Canada provided on request!
Chile
AssemblySalesService
Santiago de Chile
SEW-EURODRIVE CHILE LTDA.Las Encinas 1295Parque Industrial Valle GrandeLAMPARCH-Santiago de ChileP.O. BoxCasilla 23 Correo Quilicura - Santiago - Chile
Tel. +56 2 75770-00Fax +56 2 75770-01http://[email protected]
China
ProductionAssemblySalesService
Tianjin SEW-EURODRIVE (Tianjin) Co., Ltd.No. 78, 13th Avenue, TEDATianjin 300457
Tel. +86 22 25322612Fax +86 22 [email protected]://www.sew-eurodrive.com.cn
AssemblySalesService
Suzhou SEW-EURODRIVE (Suzhou) Co., Ltd.333, Suhong Middle RoadSuzhou Industrial ParkJiangsu Province, 215021P. R. China
Tel. +86 512 62581781Fax +86 512 [email protected]
Additional addresses for service in China provided on request!
Colombia
AssemblySalesService
Bogotá SEW-EURODRIVE COLOMBIA LTDA. Calle 22 No. 132-60Bodega 6, Manzana BSantafé de Bogotá
Tel. +57 1 54750-50Fax +57 1 54750-44http://[email protected]
Croatia
SalesService
Zagreb KOMPEKS d. o. o.PIT Erdödy 4 IIHR 10 000 Zagreb
Tel. +385 1 4613-158Fax +385 1 [email protected]
Czech Republic
Sales Praha SEW-EURODRIVE CZ S.R.O.Business Centrum Praha Lužná 591CZ-16000 Praha 6 - Vokovice
Tel. +420 220121234Fax +420 220121237http://[email protected]
Denmark
AssemblySalesService
Kopenhagen SEW-EURODRIVEA/SGeminivej 28-30DK-2670 Greve
Tel. +45 43 9585-00Fax +45 43 9585-09http://[email protected]
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 53
7 Shielding plateAddress List
Estonia
Sales Tallin ALAS-KUUL ASReti tee 4EE-75301 Peetri küla, Rae vald, Harjumaa
Tel. +372 6593230Fax +372 [email protected]
Finland
AssemblySalesService
Lahti SEW-EURODRIVE OYVesimäentie 4FIN-15860 Hollola 2
Tel. +358 201 589-300Fax +358 3 [email protected]://www.sew-eurodrive.fi
Gabon
Sales Libreville Electro-ServicesB.P. 1889Libreville
Tel. +241 7340-11Fax +241 7340-12
Great Britain
AssemblySalesService
Normanton SEW-EURODRIVE Ltd.Beckbridge Industrial Estate P.O. Box No.1GB-Normanton, West- Yorkshire WF6 1QR
Tel. +44 1924 893-855Fax +44 1924 893-702http://[email protected]
Greece
SalesService
Athen Christ. Boznos & Son S.A.12, Mavromichali StreetP.O. Box 80136, GR-18545 Piraeus
Tel. +30 2 1042 251-34 Fax +30 2 1042 251-59http://[email protected]
Hong Kong
AssemblySalesService
Hong Kong SEW-EURODRIVE LTD.Unit No. 801-806, 8th FloorHong Leong Industrial ComplexNo. 4, Wang Kwong Road Kowloon, Hong Kong
Tel. +852 2 7960477 + 79604654Fax +852 2 [email protected]
Hungary
SalesService
Budapest SEW-EURODRIVE Kft.H-1037 BudapestKunigunda u. 18
Tel. +36 1 437 06-58Fax +36 1 437 [email protected]
India
AssemblySalesService
Baroda SEW-EURODRIVE India Pvt. Ltd.Plot No. 4, GidcPor Ramangamdi • Baroda - 391 243Gujarat
Tel. +91 265 2831086Fax +91 265 2831087http://[email protected]
Technical Offices Bangalore SEW-EURODRIVE India Private Limited308, Prestige Centre Point7, Edward RoadBangalore
Tel. +91 80 22266565Fax +91 80 [email protected]
Ireland
SalesService
Dublin Alperton Engineering Ltd. 48 Moyle RoadDublin Industrial EstateGlasnevin, Dublin 11
Tel. +353 1 830-6277Fax +353 1 [email protected]
Israel
Sales Tel-Aviv Liraz Handasa Ltd. Ahofer Str 34B / 22858858 Holon
Tel. +972 3 5599511Fax +972 3 [email protected]
54 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
7 Shielding plate Address List
Italy
AssemblySalesService
Milano SEW-EURODRIVE di R. Blickle & Co.s.a.s.Via Bernini,14 I-20020 Solaro (Milano)
Tel. +39 02 96 9801Fax +39 02 96 799781http://[email protected]
Ivory Coast
Sales Abidjan SICASte industrielle et commerciale pour l'Afrique165, Bld de MarseilleB.P. 2323, Abidjan 08
Tel. +225 2579-44Fax +225 2584-36
Japan
AssemblySalesService
Iwata SEW-EURODRIVE JAPAN CO., LTD 250-1, Shimoman-no,IwataShizuoka 438-0818
Tel. +81 538 373811Fax +81 538 373814http://[email protected]
Korea
AssemblySalesService
Ansan-City SEW-EURODRIVE KOREA CO., LTD. B 601-4, Banweol Industrial Estate 1048-4, Shingil-DongAnsan 425-120
Tel. +82 31 492-8051Fax +82 31 492-8056http://[email protected]
Latvia
Sales Riga SIA Alas-KuulKatlakalna 11CLV-1073 Riga
Tel. +371 7139253Fax +371 7139386http://[email protected]
Lebanon
Sales Beirut Gabriel Acar & Fils sarlB. P. 80484Bourj Hammoud, Beirut
Tel. +961 1 4947-86 +961 1 4982-72+961 3 2745-39Fax +961 1 4949-71 [email protected]
Lithuania
Sales Alytus UAB IrsevaNaujoji 19LT-62175 Alytus
Tel. +370 315 79204Fax +370 315 [email protected]://www.sew-eurodrive.lt
Luxembourg
AssemblySalesService
Brüssel CARON-VECTOR S.A.Avenue Eiffel 5B-1300 Wavre
Tel. +32 10 231-311Fax +32 10 231-336http://[email protected]
Malaysia
AssemblySalesService
Johore SEW-EURODRIVE SDN BHD No. 95, Jalan Seroja 39, Taman Johor Jaya81000 Johor Bahru, JohorWest Malaysia
Tel. +60 7 3549409Fax +60 7 [email protected]
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 55
7 Shielding plateAddress List
Mexico
AssemblySalesService
Queretaro SEW-EURODRIVE MEXIKO SA DE CVSEM-981118-M93Tequisquiapan No. 102Parque Industrial QueretaroC.P. 76220Queretaro, Mexico
Tel. +52 442 1030-300Fax +52 442 1030-301http://[email protected]
Morocco
Sales Casablanca Afit5, rue Emir AbdelkaderMA 20300 Casablanca
Tel. +212 22618372Fax +212 [email protected]
Netherlands
AssemblySalesService
Rotterdam VECTOR Aandrijftechniek B.V. Industrieweg 175 NL-3044 AS RotterdamPostbus 10085NL-3004 AB Rotterdam
Tel. +31 10 4463-700Fax +31 10 4155-552http://[email protected]
New Zealand
AssemblySalesService
Auckland SEW-EURODRIVE NEW ZEALAND LTD. P.O. Box 58-428 82 Greenmount driveEast Tamaki Auckland
Tel. +64 9 2745627Fax +64 9 2740165http://[email protected]
Christchurch SEW-EURODRIVE NEW ZEALAND LTD. 10 Settlers Crescent, FerrymeadChristchurch
Tel. +64 3 384-6251Fax +64 3 [email protected]
Norway
AssemblySalesService
Moss SEW-EURODRIVE A/SSolgaard skog 71N-1599 Moss
Tel. +47 69 241-020Fax +47 69 241-040http://[email protected]
Peru
AssemblySalesService
Lima SEW DEL PERU MOTORES REDUCTORES S.A.C.Los Calderos, 120-124Urbanizacion Industrial Vulcano, ATE, Lima
Tel. +51 1 3495280Fax +51 1 3493002http://[email protected]
Poland
AssemblySalesService
Lodz SEW-EURODRIVE Polska Sp.z.o.o.ul. Techniczna 5 PL-92-518 Łódź
Tel. +48 42 67710-90Fax +48 42 67710-99http://[email protected]
Portugal
AssemblySalesService
Coimbra SEW-EURODRIVE, LDA. Apartado 15 P-3050-901 Mealhada
Tel. +351 231 20 9670Fax +351 231 20 3685http://[email protected]
Romania
SalesService
Bucureşti Sialco Trading SRL str. Madrid nr.4 011785 Bucuresti
Tel. +40 21 230-1328Fax +40 21 230-7170 [email protected]
56 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
7 Shielding plate Address List
Russia
AssemblySalesService
St. Petersburg ZAO SEW-EURODRIVE P.O. Box 36 195220 St. Petersburg Russia
Tel. +7 812 3332522 +7 812 5357142Fax +7 812 3332523http://[email protected]
Senegal
Sales Dakar SENEMECA Mécanique GénéraleKm 8, Route de Rufisque B.P. 3251, Dakar
Tel. +221 849 47-70Fax +221 849 [email protected]
Serbia
Sales Beograd DIPAR d.o.o.Ustanicka 128aPC Košum, IV floorSCG-11000 Beograd
Tel. +381 11 347 3244 / +381 11 288 0393Fax +381 11 347 [email protected]
Singapore
AssemblySalesService
Singapore SEW-EURODRIVE PTE. LTD. No 9, Tuas Drive 2 Jurong Industrial Estate Singapore 638644
Tel. +65 68621701Fax +65 68612827http://[email protected]
Slovakia
Sales Bratislava SEW-Eurodrive SK s.r.o.Rybničná 40SK-83554 Bratislava
Tel. +421 2 49595201Fax +421 2 [email protected]://sk.sew-eurodrive.com
Žilina SEW-Eurodrive SK s.r.o.ul. Vojtecha Spanyola 33SK-010 01 Žilina
Tel. +421 41 700 2513Fax +421 41 700 [email protected]
Banská Bystrica SEW-Eurodrive SK s.r.o.Rudlovská cesta 85SK-97411 Banská Bystrica
Tel. +421 48 414 6564Fax +421 48 414 [email protected]
Slovenia
SalesService
Celje Pakman - Pogonska Tehnika d.o.o.UI. XIV. divizije 14SLO - 3000 Celje
Tel. +386 3 490 83-20Fax +386 3 490 [email protected]
South Africa
AssemblySalesService
Johannesburg SEW-EURODRIVE (PROPRIETARY) LIMITEDEurodrive House Cnr. Adcock Ingram and Aerodrome RoadsAeroton Ext. 2Johannesburg 2013P.O.Box 90004Bertsham 2013
Tel. +27 11 248-7000Fax +27 11 494-3104http://[email protected]
Capetown SEW-EURODRIVE (PROPRIETARY) LIMITED Rainbow ParkCnr. Racecourse & Omuramba RoadMontague GardensCape TownP.O.Box 36556Chempet 7442 Cape Town
Tel. +27 21 552-9820Fax +27 21 552-9830Telex 576 [email protected]
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 57
7 Shielding plateAddress List
Durban SEW-EURODRIVE (PROPRIETARY) LIMITED2 Monaceo PlacePinetownDurbanP.O. Box 10433, Ashwood 3605
Tel. +27 31 700-3451Fax +27 31 [email protected]
Spain
AssemblySalesService
Bilbao SEW-EURODRIVE ESPAÑA, S.L. Parque Tecnológico, Edificio, 302E-48170 Zamudio (Vizcaya)
Tel. +34 94 43184-70Fax +34 94 43184-71http://[email protected]
Sweden
AssemblySalesService
Jönköping SEW-EURODRIVE ABGnejsvägen 6-8S-55303 JönköpingBox 3100 S-55003 Jönköping
Tel. +46 36 3442-00Fax +46 36 3442-80http://[email protected]
Switzerland
AssemblySalesService
Basel Alfred lmhof A.G.Jurastrasse 10 CH-4142 Münchenstein bei Basel
Tel. +41 61 417 1717Fax +41 61 417 1700http://[email protected]
Thailand
AssemblySalesService
Chonburi SEW-EURODRIVE (Thailand) Ltd.700/456, Moo.7, DonhuarohMuang Chonburi 20000
Tel. +66 38 454281Fax +66 38 [email protected]
Tunisia
Sales Tunis T. M.S. Technic Marketing Service5, Rue El Houdaibiah 1000 Tunis
Tel. +216 71 4340-64 + 71 4320-29Fax +216 71 [email protected]
Turkey
AssemblySalesService
Istanbul SEW-EURODRIVE Hareket Sistemleri San. ve Tic. Ltd. Sti. Bagdat Cad. Koruma Cikmazi No. 3 TR-34846 Maltepe ISTANBUL
Tel. +90 216 4419163 / 164 3838014/15Fax +90 216 3055867http://[email protected]
Ukraine
SalesService
Dnepropetrovsk SEW-EURODRIVEStr. Rabochaja 23-B, Office 40949008 Dnepropetrovsk
Tel. +380 56 370 3211Fax +380 56 372 2078http://[email protected]
Sales Kiev SEW-EURODRIVE GmbHS. Oleynika str. 2102068 Kiev
Tel. +380 44 503 95 77Fax +380 44 503 95 [email protected]
USA
ProductionAssemblySalesService
Greenville SEW-EURODRIVE INC. 1295 Old Spartanburg Highway P.O. Box 518Lyman, S.C. 29365
Tel. +1 864 439-7537Fax Sales +1 864 439-7830Fax Manuf. +1 864 439-9948Fax Ass. +1 864 439-0566Telex 805 550 http://[email protected]
South Africa
58 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
7 Shielding plate Address List
AssemblySalesService
San Francisco SEW-EURODRIVE INC. 30599 San Antonio St.Hayward, California 94544-7101
Tel. +1 510 487-3560Fax +1 510 [email protected]
Philadelphia/PA SEW-EURODRIVE INC. Pureland Ind. Complex 2107 High Hill Road, P.O. Box 481Bridgeport, New Jersey 08014
Tel. +1 856 467-2277Fax +1 856 [email protected]
Dayton SEW-EURODRIVE INC.2001 West Main Street Troy, Ohio 45373
Tel. +1 937 335-0036Fax +1 937 [email protected]
Dallas SEW-EURODRIVE INC.3950 Platinum Way Dallas, Texas 75237
Tel. +1 214 330-4824Fax +1 214 [email protected]
Additional addresses for service in the USA provided on request!
Venezuela
AssemblySalesService
Valencia SEW-EURODRIVE Venezuela S.A.Av. Norte Sur No. 3, Galpon 84-319Zona Industrial Municipal NorteValencia, Estado Carabobo
Tel. +58 241 832-9804Fax +58 241 838-6275http://[email protected]@cantv.net
USA
Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS 59
Index
Index
AAluminum profile rail...............................................33
BBlanking plugs
TCS compensation box......................................16TVS connection distributor.................................17
CCable gland............................................................38Cable lug................................................................38Cable outlet
TLS supply cable ...............................................28Cable type
TLS line cable ....................................................26Certifications ..........................................................37Clamp area ............................................................38clamping area ........................................................38CSA
certifications .......................................................37
DDesignated use ........................................................6Dimension sheet
shielding plate ....................................................49TCS10A compensation box ...............................40TIS...-A..-0 cable bushing grommet .............48, 49TIS...-F..-0 profile section.............................47, 48TIS...-H..-0 holding fixture ..................................46TIS...-P..-0 profile section ..................................47TIS...-V..-0 installation plate...............................43TIS...-X..-0 retaining plate ............................44, 45TVS10A connection distributor ..........................41
EExclusion of liability ..................................................5
IInstallation
aluminum profile rail ...........................................33TIS...-F..-0 profile section...................................33TIS...-P..-0 profile section ..................................33universal installation...........................................35
Installation dimensioninstallation on aluminum profile rail ....................34
universal installation ..........................................36
NNameplate
TCS compensation box .....................................13TVS connection distributor.................................13
PPrefabrication
Tools ..................................................................25
RRights to claim under limited warranty.....................5
SSafety instructions ...................................................5Safety notes
Installation and startup.........................................7Operation and service..........................................7
Shielding platedimension sheet.................................................49
TTCS compensation box
blanking plugs....................................................16design ................................................................16nameplate ..........................................................13scope of delivery................................................13Unit designation ...................................................9
TCS10A compensation boxDimension sheet ................................................40
TIS installation componentsunit designation..................................................12
TIS...-A..-0 cable bushingdesign ................................................................24function ..............................................................24scope of delivery................................................15
TIS...-A..-0 cable bushing framecertifications.......................................................37
TIS...-A..-0 cable bushing grommetdimension sheet...........................................48, 49
TIS...-F..-0installation..........................................................33
TIS...-F..-0 profile sectioncertifications.......................................................37
60 Operating Instructions – MOVITRANS® Installation Material TCS, TIS, TLS, TVS
Index
design ................................................................23dimension sheet...........................................47, 48function ..............................................................23scope of delivery ................................................15
TIS...-H..-0 holding fixturecertifications .......................................................37design ................................................................21dimension sheet.................................................46function ..............................................................21scope of delivery ................................................15
TIS...-P..-0 profile sectioncertifications .......................................................37design ................................................................22dimension sheet.................................................47function ..............................................................22installation ..........................................................33scope of delivery ................................................15
TIS...-V..-0 installation platedesign ................................................................19Dimension sheet ................................................43function ..............................................................19scope of delivery ................................................14
TIS...-X..-0 retaining platedesign ................................................................20dimension sheet...........................................44, 45function ..............................................................20scope of delivery ................................................15
TLS line cableCable type..........................................................26certifications .......................................................37connection to TAS..............................................38connection to TCS .............................................38connection to TVS..............................................38design ................................................................18electrical properties............................................37function ..............................................................18mechanical properties........................................37scope of delivery ................................................14Soldering cable lugs...........................................27technical data.....................................................37unit designation..................................................11
TLS supply cablecable outlet.........................................................28certifications .......................................................37design ................................................................18electrical properties............................................37function ..............................................................18mechanical properties........................................37scope of delivery ................................................14
technical data.....................................................37Tools
Prefabrication.....................................................25TVS connection distributor
blanking plugs....................................................17design ................................................................17function ..............................................................17nameplate ..........................................................13scope of delivery................................................14Unit designation .................................................10
TVS10A connection distributordimension sheet.................................................41
UUL
certifications.......................................................37Unit designation
TCS compensation box .......................................9TIS installation components...............................12TLS line cable ....................................................11TVS connection distributor.................................10
Universal installation..............................................35
WWarning instructions ................................................5
SEW-EURODRIVE – Driving the world
www.sew-eurodrive.com
How we’re driving the world
With people whothink fast anddevelop thefuture with you.
With a worldwide service network that isalways close at hand.
With drives and controlsthat automaticallyimprove your productivity.
With comprehensiveknowledge in virtuallyevery branch ofindustry today.
With uncompromisingquality that reduces thecost and complexity ofdaily operations.
With a global presencethat offers responsive and reliable solutions. Anywhere.
With innovativetechnology that solvestomorrow’s problemstoday.
With online informationand software updates,via the Internet, availablearound the clock.
Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation \ Services
SEW-EURODRIVEDriving the world
SEW-EURODRIVE GmbH & Co KGP.O. Box 3023 · D-76642 Bruchsal / GermanyPhone +49 7251 75-0 · Fax +49 7251 [email protected]
Top Related