MACHINE UNDER CONSTRUCTION
Name of the Component: arduino uno
Description: to comunicate motors with softwares and control LCD.If we use Fabduino, we’ ll substitute this component.
Units: 2
Dimensions:
Supplier: www.arduino.cc
Approximate Cost: 23,60 euros
Name of the Component: shaft
Description: the main axes of rotation.
Units: 1
Dimensions:
Supplier:
Approximate Cost: 150 euros
D17
D24D17
D12
M16x1
20.0162.020.07.010.0 23.0
242.0
Digital LatheAxis v.0205:05.2012
D12
X
Y
Z
Name of the Component: bearing
Description:
Units: 2
Dimensions: 35mm diameter (exterior) - 17mm diameter (interior)
Supplier: www.macmaster.com
Approximate Cost:
Name of the Component: chuck
Description: asymmetrical pieces such as rectangles. The reversible jaws clamp from 1.5 - 35mm (inside) and from 14 - 67mm (outside). The Db250 headstock spindle of thread M16 x 1 screws directly into the chuck.
With individually adjustable jaws. Used to clamp
Units: 1
Dimensions:
Supplier: www.axminster.com.uk
Approximate Cost: 28,70 euros
Name of the Component: control board DC motor
Description:facilitates the control of DC motor
Units: 1
Dimensions: 120x120x80 mm
Supplier: KB
Approximate Cost: 100euros
Name of the Component: Name of the Component: DC motor + encoder
Description:They can be used in either clockwise or counterclockwise rotation; instructions are included. You can also use a speed controller (not included) to change the motor speed. Torque remains constant over the entire speed range. Housing is aluminum and steel.
Units: 1
Dimensions:
Supplier: www.macmotor.com
Approximate Cost: 200 euros
Name of the Component: Name of the Component: Name of the Component: Fabduino
Description:
Units: 1
Dimensions:
Supplier:FabLab
Approximate Cost:
Name of the Component: GRBL Shld
Description:facilitates the control of 2 stepper motors with cursor keys, as well as with G code files.
Units: 1
Dimensions:
Supplier: Fablab
Approximate Cost:
Name of the Component: Name of the Component: magnetic closure
Description:
Units: 2
Dimensions:
Supplier: www.ehl.com
Approximate Cost: 2,30 euros
Name of the Component: Name of the Component: plastic sheets
Description: Fab Lab logo
Units: 3
Dimensions: 100 x 100mm
Supplier: www.serveisestacio.com
Approximate Cost: 3,24 (three pieces)
Name of the Component: Name of the Component: power supply
Description:
Units: 1
Dimensions: 200x100x50 mm
Supplier: Mean Well
Approximate Cost:
Name of the Component: Name of the Component: mecanical hinge
Description:
Units: 6-8
Dimensions:
Supplier:
Approximate Cost: 1,5 euros/piece
Name of the Component: Name of the Component: steal bar
Description: Made of 1566 steel, these shafts are stronger than stainless steel shafts but are less corrosion resistant. They areunhardened for easier machining. Rockwell hardness is C25.
Units: 2
Dimensions:
Supplier: www.macmaster.com
Approximate Cost: 7,36 euros / unit
Name of the Component: Name of the Component: step motors
Description:
Units: 2
Dimensions:
Supplier: www.jameco.com
Approximate Cost: 36 euros
Name of the Component: Name of the Component: feet pieces
Description: base of the machine
Units: 4
Dimensions:
Supplier:
Approximate Cost: 1,94 euros (total price)
Name of the Component: Name of the Component: Threaded Rod
Description: these rods and nuts (also known as trapezoidalthread form) offer the advantages of precision Acme threadedrods and nuts but in metric sizes. All are standardtravel (single start)and have right-hand threads. Speed ratiois 1:1.
Units: 2
Dimensions:400mm/200mm/100mm
Supplier: www.macmaster.com
Approximate Cost 90 euros:
Name of the Component: Name of the Component: Wood
Description: to make the case.
Units:
Dimensions:
Supplier:
Approximate Cost:
Name of the Component: Name of the Component: Tools 2
Description:Quality tungsten tipped turning tools
Units: 11 pieces
Dimensions: 8mm square shanks
Supplier: www.axminster.com.uk
Approximate Cost: 25 euros
Name of the Component: Name of the Component: Ventilation Grid
Description:
Units: 1
Dimensions: 100x100mm
Supplier: Air Force Systems
Approximate Cost: 1,76 euros
Name of the Component: Name of the Component: Cupling
Description:
Units: 2
Dimensions: 20mm
Supplier:
Approximate Cost:
Name of the Component: Name of the Component: Bronze Flanged Sleeve Bearings
Description: Alloy 932-Also known as SAE 660, this nonporous, cast material makes hard, strong, and abrasion-resistant bearingswith excellent resistance to shock loads (suddenly applied loads) and wear.
Units: 4
Dimensions: 10mm
Supplier: www.macmaster.com
Approximate Cost:
Top Related