Making Machine

MACHINE UNDER CONSTRUCTION

Name of the Component: arduino uno

Description: to comunicate motors with softwares and control LCD.If we use Fabduino, we’ ll substitute this component.

Units: 2

Dimensions:

Supplier: www.arduino.cc

Approximate Cost: 23,60 euros

Name of the Component: shaft

Description: the main axes of rotation.

Units: 1

Dimensions:

Supplier:

Approximate Cost: 150 euros

D17

D24D17

D12

M16x1

20.0162.020.07.010.0 23.0

242.0

Digital LatheAxis v.0205:05.2012

D12

X

Y

Z

Name of the Component: bearing

Description:

Units: 2

Dimensions: 35mm diameter (exterior) - 17mm diameter (interior)

Supplier: www.macmaster.com

Approximate Cost:

Name of the Component: chuck

Description: asymmetrical pieces such as rectangles. The reversible jaws clamp from 1.5 - 35mm (inside) and from 14 - 67mm (outside). The Db250 headstock spindle of thread M16 x 1 screws directly into the chuck.

With individually adjustable jaws. Used to clamp

Units: 1

Dimensions:

Supplier: www.axminster.com.uk


Name of the Component: control board DC motor

Description:facilitates the control of DC motor

Units: 1

Dimensions: 120x120x80 mm

Supplier: KB

Approximate Cost: 100euros

Name of the Component: Name of the Component: DC motor + encoder

Description:They can be used in either clockwise or counterclockwise rotation; instructions are included. You can also use a speed controller (not included) to change the motor speed. Torque remains constant over the entire speed range. Housing is aluminum and steel.

Units: 1

Dimensions:

Supplier: www.macmotor.com


Name of the Component: Name of the Component: Name of the Component: Fabduino

Description:

Units: 1

Dimensions:

Supplier:FabLab

Approximate Cost:

Name of the Component: GRBL Shld

Description:facilitates the control of 2 stepper motors with cursor keys, as well as with G code files.

Units: 1

Dimensions:

Supplier: Fablab

Approximate Cost:

Name of the Component: Name of the Component: magnetic closure

Description:

Units: 2

Dimensions:

Supplier: www.ehl.com


Name of the Component: Name of the Component: plastic sheets

Description: Fab Lab logo

Units: 3

Dimensions: 100 x 100mm

Supplier: www.serveisestacio.com

Approximate Cost: 3,24 (three pieces)

Name of the Component: Name of the Component: power supply

Description:

Units: 1

Dimensions: 200x100x50 mm

Supplier: Mean Well

Approximate Cost:

Name of the Component: Name of the Component: mecanical hinge

Description:

Units: 6-8

Dimensions:

Supplier:

Approximate Cost: 1,5 euros/piece

Name of the Component: Name of the Component: steal bar

Description: Made of 1566 steel, these shafts are stronger than stainless steel shafts but are less corrosion resistant. They areunhardened for easier machining. Rockwell hardness is C25.

Units: 2

Dimensions:


Approximate Cost: 7,36 euros / unit

Name of the Component: Name of the Component: step motors

Description:

Units: 2

Dimensions:

Supplier: www.jameco.com


Name of the Component: Name of the Component: feet pieces

Description: base of the machine

Units: 4

Dimensions:

Supplier:

Approximate Cost: 1,94 euros (total price)

Name of the Component: Name of the Component: Threaded Rod

Description: these rods and nuts (also known as trapezoidalthread form) offer the advantages of precision Acme threadedrods and nuts but in metric sizes. All are standardtravel (single start)and have right-hand threads. Speed ratiois 1:1.

Units: 2

Dimensions:400mm/200mm/100mm


Approximate Cost 90 euros:

Name of the Component: Name of the Component: Wood

Description: to make the case.

Units:

Dimensions:

Supplier:

Approximate Cost:

Name of the Component: Name of the Component: Tools 2

Description:Quality tungsten tipped turning tools

Units: 11 pieces

Dimensions: 8mm square shanks

Supplier: www.axminster.com.uk


Name of the Component: Name of the Component: Ventilation Grid

Description:

Units: 1

Dimensions: 100x100mm

Supplier: Air Force Systems


Name of the Component: Name of the Component: Cupling

Description:

Units: 2

Dimensions: 20mm

Supplier:

Approximate Cost:

Name of the Component: Name of the Component: Bronze Flanged Sleeve Bearings

Description: Alloy 932-Also known as SAE 660, this nonporous, cast material makes hard, strong, and abrasion-resistant bearingswith excellent resistance to shock loads (suddenly applied loads) and wear.

Units: 4

Dimensions: 10mm


Approximate Cost:

Making Machine

Business

Transcript of Making Machine