M2 Shower chair range
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
1
Table of contents
SHOWER STOOLS ................................................................................................................................................... 2
M2 SHOWER/COMMODE CHAIRS .......................................................................................................................... 27
M2 SHOWER/COMMODE CHAIRS, TILT-‐IN-‐SPACE & ELECTRIC HEIGHT ADJUSTABLE .............................................. 56
ACCESSORIES FOR M2 SHOWER/COMMODE CHAIRS ............................................................................................. 74
M2 MINI SHOWER/COMMODE CHAIRS ............................................................................................................... 107
ACCESSORIES FOR M2 MINI SHOWER/COMMODE CHAIRS .................................................................................. 116
FREESTANDING TOILETPAPER HOLDER, WALLMOUNTED SEAT AND TOILET AID MODEL FRIGG ........................... 129
SPECIALMADE PRODUCTS -‐ ANYTHING IS POSSIBLE ............................................................................................. 138
BEDTABLE/ READING TABLE, METAL STOOL, SUPPORT HANDLE & BED GUARD .................................................. 150
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
2
Shower stools
Nielsen Line ..................................................................................................................... 3 NEPTUN Height Adjustable Shower Stool ...................................................................... 9 NEPTUN Super Soft height adjustable shower stool .................................................... 11 Adjustable shower stool ................................................................................................. 13 Adjustable shower stool with hole ................................................................................. 15 Shower stool .................................................................................................................. 17 200 kg shower stool with telescopic legs ....................................................................... 19 300kg Neptun Super Soft shower stool ......................................................................... 21 NEPTUN Supersoft Transfer shower stool .................................................................... 23 NEPTUN Small Shower Stool ....................................................................................... 25
Return to
menu
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
3
Nielsen Line height adjustable shower stools
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
4
The Nielsen Line shower stools are designed for the modern bathroom
A recess in front of the seat makes
intimate hygiene easier and ensures
that the user stays self-reliant longer.
The shower stool stands firmly in all
positions and in spite of its low weight it
can take up to 150 kg.
The backrest is designed so it is both comfortable and provides freedom of movement for the user.
The Nielsen Line shower stool is made
from 100 % rust-proof materials.
The stool is available in two widths (41
& 50 cm between the armrests) and it is
possible to buy both with or without the
backrest.
The sturdy armrests provides safety for
the user and facilitates the rising or
sitting down.
Nielsen Line
Badebænke & badetaburet
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
5
In the small shower area, or if you don’t need the armrests,
you can choose the small shower stool.
As standard this Nielsen Line shower stool has a seat width of 41 cm and a recess in front
of the seat for intimate wash.
It is possible to buy a foam cushion as well as a backrest for
the shower stool.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
6
Accessories for Nielsen Line
Backrest for Nielsen Line
The ergonomically correct back rest provides optimal support for the back without affecting the user’s freedom
of movement.
The back rest fits all the Nielsen Line shower stools.
Backrest for Nielsen Line shower stools
Item no: 313004
Foam cushion for Nielsen Line
A comfortable foam cushion is available for both seat widths.
It provides the user extra seat comfort and it is easy to attach with four clips.
Foam cushion for Nielsen Line shower stools
Foam cushion, 41 cm. Item no: 313020 Foam cushion, 50 cm. Item no: 313021
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
7
Technical data Nielsen Line shower stool 41 cm.
Nielsen Line shower stool 50 cm.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
8
Technical data Nielsen Line small shower stool 41 cm.
Seat and backrest Polypropylen
Telescopic legs Aluminium with rubber leg ferrules
Clips in stainless steel and polypropylene
Care Common cleaning agents (not scouring agents).
Max. 80 °C
Description Item no: Weight: ISO nr.:
Nielsen Line shower stool 41 cm. 313001 4,0 kg. 09 33 03
Nielsen Line shower stool 50 cm. 313002 4,3 kg. 09 33 03
Nielsen Line small shower stool 313003 3,3 kg. 09 33 03
Backrest 313004 0,7 kg. 09 33 03
Foam cushion, 41 cm 313020 0,1 kg. 09 33 03
Foam cushion, 50 cm 313021 0,1 kg. 09 33 03
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
9
NEPTUN Height Adjustable Shower Stool in stainless steel
Made in stainless steel
(Telescopic legs in aluminium).
Very comfortable seat and backrest.
Very easy to clean.
Very easy to adjust height (43-64 cm)
Backrest (=accessory) can be put on and taken off
without using tools.
The backrest can be adjusted in two depths.
The shower stool comes in two different widths
(41 and 50 cm)
⇒Air filled plastic seat, which
you can click off (for cleaning
a.s.o.). The seat is with a
nobly surface and with water
grooves.
⇐The frame is designed to
make it very easy to clean.
⇒The backrest is put on with
two clips. It can be adjusted in
two depths. The air filled
plastic part can be clicked off
(for cleaning a.s.o.)
⇐The Height is adjusted with
clips
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
10
Technical data and item no.: Please see back.
Technical data: NEPTUN Height Adjustable Shower Stool in stainless steel Shower Stool 41 cm Shower Stool 50 cm Backrest
Seat heights
43-64 cm 43-64 cm -
Total heights (at the armrest) 56-77 cm 56-77 cm At the top of the
backrest
79-100 cm
Width between armrests 41 cm 50 cm -
Seat size.(size of the plastic seat) W41xD36,5xH4,5 cm W41xD36,5xH4,5 cm -
App. Widths at floor 54,5-58,5 cm 60,5-64,5 cm -
App. Depths at floor 44-52 cm 44-52 cm -
Size of the plastic part of the backrest - - Width bottom
33 cm
Width top
27 cm
Height 20 cm
Depth backrest (can be adjusted in two
different depths
- - 2 cm from seat edge
and
4 cm from seat edge
Weight 4,6 kg 4,9 kg 1,3 kg
Seat/back plastic part material Polythene plastic Polythene plastic Polythene p.
Cleaning Ordinary cleaning
detergents at max. 80
degrees.
Ordinary cleaning
detergents at 80
degrees.
Same as the shower
stool
Stackable Yes Yes -
Max. User load 150 kg 150 kg 150 kg
Frame Stainless Steel.
Powder lacquered
Stainless Steel.
Powder lacquered
Stainless Steel
Powder
Lacquered
Telescopic legs Aluminium. Height
adjustable in 8 positions.
Aluminium.
Height adjustable in 8
positions.
-
Rubber feet Grey plastic. Hole in
bottom for outflow of
water.
Grey plastic. Hole in
bottom for outflow of
water
-
Description: Art. no: Neptun Height adjustable shower stool width 41 cm 312000
Neptun Height adjustable shower stool width 50 cm 312001
Neptun backrest 312020
Spare parts: Clips for height adjustment (the same one for backrest) 310065
Plastic seat for Neptun 312030
Telescopic legs (1 pc. with clips, rubber feet, bush) 312033
Rubber feet (for telescopic legs) 310017
Bush (for telescopic legs) 310021
Plastic part for backrest 312031
27.09.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
11
NEPTUN Super Soft height adjustable shower stool
This version of our famous Neptun Shower Stool is fitted
with a very soft PU foam seat and backrest
(Backrest is an accessory)
Made from stainless steel
(with telescopic legs made of aluminium)
Very easy to clean
Easily height adjustable (45-66 cm)
The backrest can be mounted or removed without the use
of tools.
The backrest is depth adjustable in two steps
The stool is available in two widths (41 and 50 cm)
Seat and back can be cleaned in disinfecting bedpan
washers
Soft PU seat that snaps on easily onto the frame.
The seat has grooves and
holes for draining excess water from the seat.
Extra soft seat for even higher
comfort.
Seat height is adjusted with
clips.
The backrest Is mounted with
clips, and adjustable in two different depths.
The foam piece on the back can be removed for
cleaning.
Technical data and item numbers: Please see back
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
12
Technical data: NEPTUN Super Soft, height adjustable Shower stool with an extra soft seat
Technical Detail Shower Stool 41cm Shower Stool 50 cm Backrest
Seat height 45-66 cm 45-66 cm -
Total height (upper armrest) 56-77 cm 56-77 cm Upper edge of
backrest
81-102 cm
Width between Armrests 41 cm 50 cm -
Size Foam Seat B40xD36,5xH4 cm B40xD36,5xH4 cm -
Width at the floor, approximately 61-65 cm -
Depth at the floor, approximately 43-49 cm 43-49 cm -
Measurements, backpiece – PU part - - Width lower edge
34 cm
Width upper
edge
24 cm
Height 27 cm
Adjustable Depth – Backrest - - 2 cm from edge
of seat
4 cm from edge
of seat
Weight Approx 5 kg Approx 5,9 kg Approx 1 kg
Material: Seat /backrest PU Foam PU Foam PU Foam
Maintenance Normal cleaning agents at
max. 80 ºC
Normal cleaning agents
at max. 80 ºC
Same agents as
the bench itself
Stackable Yes Yes -
Maximum userwheight 150 kg 150 kg 150 kg
Frame Stainless steel, powder
coated, white
Stainless steel, powder
coated, white
Stainless steel,
powder coated,
white
Teleskope legs Aluminium (stainless) height
adjustable, 8 levels
Aluminium (stainless)
height adjustable, 8
levels
-
Rubber feet for legs Grey plastic, with draining
hole
Grey plastic, with
draining hole
-
Description: Art. no. Neptun Super Soft height adjustable shower stool 41 cm 312002
Neptun Super Soft height adjustable shower stool 50 cm 312003
Neptun Super Soft Backrest 312021
Article: Clips for height adjustment and mounting of backrest 310065
PU foam Seat for Neptun Super Soft 800300
Teleskopic leg (1 piece with clip, rubber foot and bush) 312033
Rubber foot 310017
Bush 310021
PU foam backrest piece Neptun Super Soft 800301
27.09.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
13
Adjustable shower stool
Solid and very stable shower stool, which have
been equipped with telescopic legs.
The telescopic legs make it possible to adjust the
shower seat from 420 mm to 625 mm in height with
8 different adjustments. This can be done without
any tools.
The structure of the telescopic legs and the non-slip
rubber feet make sure the shower stool stands very
stable.
The shower stool is stackable and is prepared for
the mounting of a back rest (easily put on with the
help of 4 screws). The back is made of the same
strong materials.
You can get the adjustable shower stool in two
different widths.
⇓As acc. You can get a soft foam cushion.
It comes in two widths.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
14
Technical Data: Adjustable shower stool Adjustable shower stool Adjustable shower stool Width 410 mm Width 500 mm Max. Seat height 625 mm 625 mm Min. seat height 420 mm 420 mm Max. Total height 770 mm 770 mm Min. total height 560 mm 560 mm Seat width 410 mm 500 mm Max. Width at floor 595 mm 680 mm Min. width at floor 560 mm 640 mm Seat depth 360 mm 360 mm Max. Depth at floor 520 mm 520 mm Min. depth at floor 440 mm 440 mm Weight 4,7 kg 5,0 kg Max. Load 150 kg 150 kg Surface treatment Rilsan which is a nylon coating with following
characteristics: Weatherproof, Chemically proof, Proof
against salt mist for over 2000 hours,
Physiological harmless, 220 - 250 my Slats Plastic slate 60 mm width and 6 mm thick
Rubber Feets Non slip technical grey rubber “no marks at the floor”
Hole in the rubber feet for outflow of water
Telescopic legs White lacquered aluminium tube fasten with same type
of clips as for elbow crutch
Shower stool back rest Max. Width 410 mm, height over the seat 320 mm
Mounted with 4 6 mm screws
Article: Art. No. Adjustable shower stool 500 mm 310122
Adjustable shower stool 410 mm 310120 Shower stool back rest 310180 Foam cushion. 36x37 cm (for 41 cm) 310178 Foam cushion 36x47 cm (for 50 cm) 310179 Slat middle 410 mm 310151 Slat edge 410 mm 310156 Slat middle 500 mm 310150 Slat edge 500 mm 310155 Rubber feet 310175 Screws for shower stool back 310184 Spacers for shower stool back 15/08/01 310182
27.09.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
15
Adjustable shower stool with hole
Solid and very stable shower stool with telescopic legs. Furthermore it has a hole for intimate wash.
The telescopic legs make it possible to adjust the shower seat from 420 mm to 625 mm in height with 8
different adjustments. This can be done without any tools.
The structure of the telescopic legs and the no slip rubber feet make sure the shower seat stands
very stable.
The shower stool is stackable to store and is prepared for the mounting of a back rest (easily put on with
the help of 4 screws). The back is made of the same strong materials.
The adjustable shower seat with hole for intimate wash is standard width 500 mm.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
16
Technical Data: Adjustable shower stool with hole Max. Seat height 625 mm
Min. seat height 420 mm
Max. Total height 770 mm
Min. total height 560 mm
Seat width 500 mm
Max. Width at floor 680 mm
Min. width at floor 640 mm
Seat depth 360 mm
Max. Depth at floor 520 mm
Min. depth at floor 440 mm
Hole width 145 mm
Hole depth 230 mm
Weight 5,0 kg
Max. Load 150 kg
Surface treatment Rilsan which is a nylon coating with following characteristics:
Weatherproof
Chemically proof
Proof against salt mist for over 2000 hours
Physiological harmless
220 - 250 my
Slates Plastic slate 60 mm width and 6 mm thick
Rubber feet Non-slip technical grey rubber “no marks at the floor”. Hole in rubber feet for
outflow of water
Telescopic legs White lacquered aluminium tube fasten with same type of clips as for elbow crutch
Shower stool back rest Max. width 410 mm, height over the seat 320 mm
Mounted with 4 6 mm screws
Article: Art. No. Adjustable shower stool with hole 310123
Shower stool back rest 310180
Rubber feet 310175
Screws for shower stool back rest 310184
Spacer for shower stool back rest 310182
29.09.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
17
Shower stool
A very robust and easy to clean shower stool, which
thanks to the durable nylon coating offers
outstanding durability.
The structure of the shower stool and the nonslip
rubber feet’s make sure the shower stool stands
very stable.
The shower stool is stackable and prepared for the
mounting of a back rest (easily put on with the help
of 4 screws). The back is made of the same strong
materials.
The shower stool comes in 4 different standard
sizes.
⇓As acc. You can get a soft foam cushion.
It comes in two widths.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
18
0Technical Data: Shower stool H x W 47x50 47x41 52x50 52x41
Seat height 47,0 cm 47,0 cm 52,0 cm 52,0 cm
Total height 61,0 cm 61,0 cm 66.0 cm 66,0 cm
Seat width 50,0 cm 41,0 cm 50.0 cm 41.0 cm
Max. width at floor 66,5 cm 57,5 cm 66,5 cm 57,5 cm
Seat depth 36.0 cm 36,0 cm 36.0 cm 36.0 cm
Max. depth at floor 46,0 cm 46,0 cm 46.0 cm 46.0 cm
Weight 5,0 kg 4,6 kg 5,1 kg 4,7 kg
Max. Load 150 kg 150 kg 150 kg 150 kg
Surface treatment Rilsan which is a nylon coating with following characteristics:
Weatherproof
Chemically proof
Proof against salt mist for over 2000 hours
Physiological harmless
220 - 250 my
Slates Plastic slate 60 mm width and 6 mm thick
Rubber feet Non slip technical grey rubber “no marks at the floor” Hole in rubber
feet for outflow of water
Shower stool back rest Max. width 410 mm, height over the seat 320 mm
Mounted with 4 6 mm screws
Article: Art. No. Shower stool 470x500 310125
Shower stool 470x410 310126
Shower stool 520x500 310130
Shower stool 520x410 310131
Shower stool back rest 310180
Foam cushion 36x37 cm (for 41 cm) 310178
Foam cushion 36x47 cm (for 50 cm) 310179
Slat middle 410 mm 310151
Slat edge 410 mm 310156
Slat middle 500 mm 310150
Slat edge 500 mm 310155
Rubber feet 310175
Screws for shower stool back rest 310184
Spacer for shower stool back rest 310182
27.09.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
19
200 kg shower stool with telescopic legs
Shower stool made for large individuals and users
that require additional space.
The 70 cm seat width makes it big enough to
accommodate all sizes of persons comfortably.
It has been specially designed to withstand a max.
load of 200 kg.
The height of the stainless steel telescoping legs is
adjustable with three seat heights: 47, 50 and 53
cm.
You can easily adjust the height using cross clips
without any tools at all.
The seat can be inclined at an angle using the
telescoping legs (at 70 and 3,50 angles), making it
easier to sit down and get up.
You may want to use a seat height of 47 cm at the
front and 53 cm at the back.
Technical data and item no: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
20
Technical Data: 200 kg Shower stool with telescoping legs Seat height 47 cm - 50 cm - 53 cm
Max. total height 67 cm
Min. total height 61 cm
Seat width 70 cm
Max. width at floor 83 cm
Min. width at floor 82 cm
Seat depth 36 cm
Max. depth at floor 48 cm
Min. depth at floor 46 cm
Weight 9,4 kg
Max. Load 200 kg
Inclining the seat With the front clip placed in the lower hole and the rear clip in the upper hole, the
seat height is 47 cm at the front and 52 cm at the back (70 angle)
With the front clip placed in the lower hole and the rear clip in the intermediate
hole, the seat height is 47 cm at the front and 50 cm at the back (3,50 angle)
Surface treatment
Rilsan which is a nylon coating with following characteristics: Waterproof.
Chemically proof
Proof against salt mist for over 2000 hours
Physiological harmless
Slates Plastic slates 60 mm width and 6 mm thick
Rubber Feet’s Non-slip technical grey rubber “no marks at the floor”.
Hole in the rubber feet for outflow of water
Telescopic legs Stainless steel with 3 adjustments, distance 3 cm
Article: Art. No. 200 Kg shower stool 500 mm 310145
Back rest for 200 kg shower stool 310144
Clip for this model shower stool 310065
27.09.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
21
300kg Neptun Super Soft shower stool In stainless steel with telescopic legs
Made to fit larger users with the need of more space.
Seat width of 75cm meets the requirements of
most users.
Reinforced to handle the max load of 300kg.
Seat and backrest can be cleaned in autoclave.
The stool in made entirely in stainless steel.
The backrest can easily be assembled and
disassembled without the use of tools.
Seats and backrest made in very soft PU foam.
The two seats can easily be detached.
User-adaptable backrest provides the greatest
level of comfort.
The solid construction of the frame ensures a stable
shower stool even at the max load of 300kg.
The stainless telescopic legs provide the shower
stool with height adjustment in 3 levels:
49, 52 and 55cm.
Height-adjustable via clips
(without the use of tools)
Technical data and item no: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
22
Technical data: 300kg Neptun Super Soft shower stool In stainless steel with telescopic legs
Seat heights 49 cm - 52 cm - 55 cm
Max. Total height 67 cm
Min. Total height 61 cm
Seat width 75 cm
Max. Width at floor 86 cm
Min. Width at floor 85 cm
Seat depth 40 cm
Max. Depth at floor 58 cm
Min. Depth at floor 56 cm
Weight 12,6 kg (The weight of the backrest is 3.1 kg.)
Max. load 300 kg
Surface treatment Powder lacquered, white
Seat and backrest PU foam
Rubber feets Non slip technical grey rubber ”no marks on the floor”.
Hole in the rubber feet for outflow of water.
Telescopic legs Stainless steel, 3 levels of heights at 3cm intervals. Adjustable by clips.
Article: Art. no. ISO no.: 300 kg showerstool 300300 09 33 03
Backrest for 300kg showerstool 300301
Clips 310065
29.09.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
23
NEPTUN Supersoft Transfer shower stool
Neptun super soft stainless steel shower stool
constructed especially for transport from wheelchairs,
shower-commode chairs etc. to the shower stool.
It’s made from stainless steel
Easily height adjustable (45-66 cm)
The backrest is depth adjustable in two steps
Seat and back can be cleaned in disinfecting bedpan
washers.
⇒ The shower stool allows the users to transfer
themselves using a sliding board.
⇐ Extra soft seat and back for even higher comfort.
Technical data and item numbers: Please see back
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
24
Technical data: NEPTUN Supersoft Transfer shower stool Backrest
Seat height 44-65 cm -
Total height (upper armrest) 56-77 cm Upper edge of backrest
81-102 cm
Size Foam Seat B40xD36xH4 cm -
Width at the floor, approximately 63-67 cm -
Depth at the floor, approximately 43-49 cm -
Measurements, backpiece – PU part - Width lower edge
34 cm
Width upper edge
24 cm
Height 27 cm
Adjustable Depth – Backrest - 2 cm from edge of seat
4 cm from edge of seat
Weight Ca. 6,0 kg Ca. 1 kg
Material: Seat /backrest PU Foam PU Foam
Maintenance Normal cleaning agents at max. 80 ºC Same agents as the bench
itself
Stackable Yes -
Maximum userwheight 150 kg 150 kg
Frame Stainless steel, powder coated, white Stainless steel, powder
coated, white
Teleskope legs Aluminium (stainless) height adjustable, 8
levels
-
Rubber feet for legs Grey plastic, with draining hole -
Article: Art. no. ISO nr.: Neptun Supersoft transfer shower stool 312010 09 33 03
Neptun Super Soft Backrest 312021
Spare parts: Clips for height adjustment and mounting of backrest 310065
PU foam Seat for Neptun Super Soft 800300
Teleskopic leg (1 piece with clip, rubber foot and bush) 312033
Rubber foot 310017
Bush 310021
PU foam backrest piece Neptun Super Soft 800301
29.09.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
25
NEPTUN Small Shower Stool In stainless steel
Small shower stool made for places where you do
not have enough room for a standard shower stool.
Made in Stainless Steel (telescopic legs in
aluminium).
Very comfortable seat.
Very easy to clean.
Very easy to adjust height (43-58 cm).
⇒Air filled plastic seat which you
can click off (for cleaning a.s.o.).
The seat is with a nobly surface
and with water grooves.
⇐The frame is designed to
make it very easy to clean.
⇒The Height is adjusted with clips
NB! You cannot use a backrest
with this item.
Technical data and item no: Please see back
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
26
Technical data: NEPTUN Small shower Stool In stainless steel
Neptun small Shower Stool
Seat heights
43-58 cm
Seat size. (size of the plastic seat) W41xD36, 5xH4,5 cm
App. Widths at floor 40-42,5 cm
App. Depths at floor 44-46 cm
Weight 3,7 kg
Seat plastic part material Polythene plastic
Cleaning Ordinary cleaning detergents at max. 80 degrees.
Stackable Yes
Max. user load 150 kg
Frame Stainless Steel.
Powder lacquered
Telescopic legs Aluminium. Height adjustable in 8 positions.
Rubber feet Grey plastic. Hole in bottom for outflow of water.
NB! You cannot use a backrest with this item
Article: Art. No. Neptun small shower stool 312100
Spare parts:
Clips for height adjustment 310065
Plastic seat for Neptun 312030
Telescopic legs (1 pc. with clips, rubber feet, bush) 312130
Rubber feet (for telescopic legs) 310017
Bush (for telescopic legs) 312131
27.09.12
‘
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
27
M2 shower/commode chairs M2 Shower/commode chair standard ........................................................................................ 28
M2 Shower/commode chair with curved pushing frame ............................................................ 30
M2 Shower/commode chair Boxed ............................................................................................ 32
M2 Shower/commode chair with curved pushing frame ............................................................ 34
& net-weave back ...................................................................................................................... 34
M2 Shower/commode chair with armrests going to the side ..................................................... 36
M2 Shower/commode chair without wheels .............................................................................. 38
M2 Shower/commode chair with central brake .......................................................................... 40
M2 Shower/commode chair Self-propelled with 24” Wheels ..................................................... 42
M2 Shower/commode chair self-propelled, Boxed .................................................................... 44
M2 Shower/commode chair 200 kg ........................................................................................... 46
M2 Shower/commode chair 200 kg Motor ................................................................................. 48
M2 Shower/commode chair 300 kg ........................................................................................... 50
M2 Shower/commode chair M2 Small ....................................................................................... 52
”Hip-patient” seat for M2 shower/commode chairs .................................................................... 54
�
Return to menu
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
28
M2 Shower/commode chair standard Height adjustable in stainless steel
⇑With extra large hole
Version where the seat has an extra-large hole
allowing room for washing i.e.
Article. No.: 310036
(The chair is shown with footrests)
⇑M2 with standard seat
The armrests are going straight up.
Article no. 310035
(The chair is shown with footrests)
Seat height adjustable from 45 cm-57 cm (no tools
involved, just move a clip).
Standard is four 100 mm rubber tires with double
action brakes.
4,5 cm thick p.u. foam seat and back which is soft
and very durable.
Incl. in the standard chairs is seat lid in p.u. foam
and built in holder for bucket.
The seat “clicks” on and off for easy cleaning.
⇑With the chair follows a lid which covers the whole
seat.
If you wish the chairs can be delivered with pu foam
cushions on the armrests.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
29
Technical data and item no.: Please see back.
Technical data: Standard models Shower/Commode chair M2
Height adjustable Ca. 44,5 cm-46,5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm
Seat width 46,5 cm
Seat depth 44 cm
Heights (by handles) 84 cm-97 cm
Max. width (by armrests) 58 cm
Width between armrests 46 cm
Free heights under seat 35,5 cm-48,5 cm
Max. Floor measurement (without footrests)
Depth 66 cm With 50 cm
Weight 16 kg
Max. Load 150 kg
Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on all 4 wheels.
Height adjustment Telescopic legs of stainless steel with 7 adjustments, distance 20 mm.
Seat/back/seat lid Seat: 45 mm thick P.U. foam Back: 25-40 mm thick P.U. foam Seat lid: 25 mm P.U. foam
Surface/metal ALL STAINLESS STEEL and powder lacquered
Description: Item number: Shower/commode chair M2 with armrests going straight up. (incl. seat lid and hanging for bucket). With standard seat.
310035
Shower/commode chair M2 with armrests going straight up. (incl. seat lid and hanging for bucket) With extra large hole.
310036
OTHER MODELS: SEE BROCHURES ABOUT THESE.
ACCESORIES: (See brochures for more details)
Extra charge when you want pads on the armrests 310043
Foot rests for M2 310049
Bucket with lid for all seats 310048
Stainless steel bedpan 330017
Extra charge for chair delivered with “hip-patient” seat 310250
Leg rests with elevation. Set with one for each side. 1 calf rest for each. 310052
Leg rest with elevation. One for right leg. With one calf rest. 310053
Leg rest with elevation. One for left leg. With one calf rest. 310054
One leg rest with elevation and one normal footrest. Elevational for left leg. One calf rest for the elevational.
310055
One leg rest with elevation and one normal footrest. Elevational for right leg. One calf rest for the elevational.
310056
Extra calf rest. 310358
Plastic cover for leg rests with elevation. One piece. 310058
Adjustable head support. Including mounting set 310059
Drip stand for mounting on M2’s. Incl. Mounting kit. 310050
Mounting kit for drip stand (without the drip stand itself) 310051
Standard seat for M2. 310340
Seat lid for standard seat 310341
Seat with extra large hole for M2. 310342
Seat lid for seat with extra large hole 310343
White foam seat for shower/commode chairs. 330016
14.08.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
30
M2 Shower/commode chair with curved pushing frame Height adjustable in stainless steel
With curved pushing frame.
⇑With the chair follows a lid which covers the whole
seat.
⇑M2 with standard seat.
(Shown with accessories)
Version with curved pushing frame, which makes
the chair able to go very close to the wall
(can be necessary if the toilet cistern is built
into the wall).
Otherwise the chair is like M2 with pushing handles.
Seat with extra large hole. The seat can be clicked
off and on so you can change between standard
seat and seat with extra large hole
If you wish the chairs can be delivered with pu foam
cushions on the armrests.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
31
Technical data: Shower/Commode chair M2, with curved pushing frame Height adjustable. ALL STAINLESS STEEL
Seat heights Ca. 44,5 cm-46, 5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm
Seat width 46,5 cm
Seat depth 44 cm
Heights (by pushing frame) 84 cm-97 cm
Max. width (by armrests) 58 cm
Width between armrests 46 cm
Free heights under seat 35,5 cm-48,5 cm
Max. floor measurement (without footrests)
Depth 66 cm With 50 cm
Weight 16 kg
Max. Load 150 kg
Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on all 4 wheels.
Height adjustment Telescopic legs of stainless steel with 7 adjustments, distance 20 mm.
Seat/back/seat lid Seat: 45 mm thick P.U. foam Back: 25-40 mm thick P.U. foam Seat lid: 25 mm P.U. foam
Surface/metal ALL STAINLESS STEEL and powder lacquered
Description: Item number: M2 Shower/commode chair. With armrest going straight up. With curved pushing frame.
310034
M2 Shower/commode chair. With armrest going straight up. With curved pushing frame. With extra large hole.
310091
ACCESORIES: (See brochures for more details)
Extra charge when you want pads on the armrests 310043
Foot rests for M2 310049
Bucket with lid for all seats. 310048
Stainless steel bedpan 330017
Extra charge for chair delivered with “hip-patient” seat 310250
Leg rests with elevation. Set with one for each side. 1 calf rest for each. 310052
Leg rest with elevation. One for right leg. With one calf rest. 310053
Leg rest with elevation. One for left leg. With one calf rest. 310054
One leg rest with elevation and one normal footrest. Elevational for left leg. One calf rest for the elevational.
310055
One leg rest with elevation and one normal footrest. Elevational for right leg. One calf rest for the elevational.
310056
Extra calf rest. 310358
Plastic cover for leg rests with elevation. One piece. 310058
Adjustable head support. Including mounting set 310059
Drip stand for mounting on M2’s. Incl. Mounting kit. 310050
Mounting kit for drip stand (without the drip stand itself) 310051
Standard seat for M2. 310340
Seat lid for standard seat 310341
Seat with extra large hole for M2. 310342
Seat lid for seat with extra large hole 310343
White foam seat for shower/commode chairs. 330016
14.08.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
32
M2 Shower/commode chair Boxed With curved pushing frame. Height adjustable in stainless steel
⇑ M2-Boxed with standard seat and curved
pushing frame. (Shown with accessories)
For further product attributes etc.: See brochure on M2 with pushing frame.
This is how little space an M2-Boxed parcel takes up compared to a normal M2 parcel.
There can be 14 M2-Boxed on a standard EU-pallet.
⇑With the chair follows a lid which covers the
whole seat.
M2 in Boxed version is very easy to assemble. It is easily done with an Allen wrench.
The chair is packed in a compact carton and can easily be transported.
The measurement of the carton is H 360 x B 615 x D 490
In the box there is also room for bucket and footrests.
Seat with extra large hole. The seat can be
clicked off and on so you can change between standard seat and seat with extra
large hole
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
33
Technical data: Shower/Commode chair M2 BOXED, with curved pushing frame Height adjustable. ALL STAINLESS STEEL
Seat heights Ca. 44,5 cm-46, 5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm
Seat width 46,5 cm
Seat depth 44 cm
Heights (by pushing frame) 84 cm-97 cm
Max. width (by armrests) 58 cm
Width between armrests 46 cm
Free heights under seat 35,5 cm-48,5 cm
Max. floor measurement (without footrests)
Depth 66 cm With 50 cm
Weight 16 kg
Max. Load 125 kg
Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on all 4 wheels.
Height adjustment Telescopic legs of stainless steel with 7 adjustments, distance 20 mm.
Seat/back/seat lid Seat: 45 mm thick P.U. foam Back: 25-40 mm thick P.U. foam Seat lid: 25 mm P.U. foam
Surface/metal ALL STAINLESS STEEL and powder lacquered
Description: Item number: M2 Boxed shower/commode chair. With armrest going straight up. With curved pushing frame.
310700
M2 Boxed shower/commode chair. With armrest going straight up. With curved pushing frame. With extra large hole.
310701
ACCESORIES: (See brochures for more details)
Extra charge when you want pads on the armrests 310043
Foot rests for M2 310049
Bucket with lid for all seats. 310048
Stainless steel bedpan 330017
Extra charge for chair delivered with “hip-patient” seat 310250
Leg rests with elevation. Set with one for each side. 1 calf rest for each. 310052
Leg rest with elevation. One for right leg. With one calf rest. 310053
Leg rest with elevation. One for left leg. With one calf rest. 310054
One leg rest with elevation and one normal footrest. Elevational for left leg. One calf rest for the elevational.
310055
One leg rest with elevation and one normal footrest. Elevational for right leg. One calf rest for the elevational.
310056
Extra calf rest. 310358
Plastic cover for leg rests with elevation. One piece. 310058
Adjustable head support. Including mounting set 310059
Drip stand for mounting on M2’s. Incl. Mounting kit. 310050
Mounting kit for drip stand (without the drip stand itself) 310051
Standard seat for M2. 310340
Seat lid for standard seat 310341
Seat with extra large hole for M2. 310342
Seat lid for seat with extra large hole 310343
White foam seat for shower/commode chairs. 330016
14.08.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
34
M2 Shower/commode chair with curved pushing frame & net-weave back
Height adjustable in stainless steel
⇑
Flexible washable back part in net-weave. The depth on the back part is adjusted by 2
buckles
⇑ Seat with extra large hole. The seat can be clicked off and on so you can change between standard
seat and seat with extra large hole
⇑ With the chair follows a lid which covers the whole
seat
Technical data and item no.: Please see back.
⇑ M2 with standard seat.
(Shown with accessories)
With curved pushing frame. Version with curved pushing frame, which makes
the chair able to go very close to the wall. Back part in net-weave that ensures greater
flexibility for the user.
⇑ If you wish the chairs can be delivered with pu
foam cushions on the armrests.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
35
Technical data and item no.: Please see back.
Technical data: Shower/commode chair M2 with curved pushing frame & net-weave back.
Seat heights App. 44,5 cm-46,5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm
Seat width 46,5 cm
Seat depth 44 cm
Heights (by pushing frame) 84 cm-97 cm
Max. width (by armrests) 58 cm
Width between armrests 46 cm
Free heights under seat 35,5 cm-48,5 cm
Max. floor measurement (without footrests) Depth 66 cm width 50 cm
Weight 16 kg
Max. Load 150 kg
Wheels. (Standard is 100 mm. Can against an extra charge be delivered with 125 mm wheels)
125 mm wheels with grey rubber and ball bearings. Double working brakes on all 4 wheels.
Height adjustment Telescopic legs of stainless steel with 7 height adjustments with 2 cm’s interval. The height is adjusted with clips.
Seat/seat lid Seat: 4,5 cm thick P.U. foam Seat lid: 2,5 cm P.U. foam
Back part 24cmx43,5cm. Depth adjustment up till 10 cm. Net-weave with sewed on webbing and 2 buckles for adjusting depth. Washable at max. 80 degrees. (CANNOT be put in a tumble dryer.)
Surface/metal- frame
Stainless steel. Powder lacquered.
Description: Article no: M2 Shower/commode chair (Incl. Seat lid and build in holder for bucket) With curved pushing frame and net-weave. With standard seat.
310027
M2 Shower/commode chair (Incl. Seat lid and build in holder for bucket) With curved pushing frame and net-weave. Seat with extra large hole.
310028
ACCESORIES: (See brochures for more details) Extra charge when you want pads on the armrests 310043
”Push-away” footrests for M2 310049
Bucket with lid for all seats. 310048
Extra charge for chair delivered with 125 mm wheels (instead of standard 100 mm) 310219
Extra charge for chair delivered with “hip-patient” seat 310250
Calf rests. Net-weave with velcro tape 310226
Stainless steel bedpan 330017
Leg rests with elevation. Set with one for each side. 1 calf rest for each. 310052
Leg rest with elevation. One for right leg. With one calf rest. 310053
Leg rest with elevation. One for left leg. With one calf rest. 310054
One leg rest with elevation and one normal footrest. Elevational for left leg. One calf rest for the elevational.
310055
One leg rest with elevation and one normal footrest. Elevational for right leg. One calf rest for the elevational.
310056
Extra calf rest. 310358
Plastic cover for leg rests with elevation. One piece. 310058
White foam seat for shower/commode chairs. 330016
14.08.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
36
M2 Shower/commode chair with armrests going to the side
Height adjustable in stainless steel
Curved armrests with pu foam
The chair can be ordered with straight armrests going to the side
⇑ M2 with seat with extra large hole (Shown with accessories)
Model where the armrests are moved out side wards.
It gives the user better access possibilities. Optional curved or straight
armrests (curved armrests are going down in front of the user)
Otherwise the chair is like M2 with pushing handles.
Straight armrests with pu foam.
Standard seat. The seat can be clicked off and on so
you can change between the two seats. With the chair follows a lid which covers the whole seat.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
37
Technical data: Shower/Commode chair M2. Model with armrests going to the side Height adjustable. ALL STAINLESS STEEL
Seat heights Ca. 44,5 cm-46, 5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm
Seat width 46,5 cm
Seat depth 44 cm
Heights (by handles) 84 cm-97 cm
Max. width (by armrests) 58 cm
Width between armrests 46 cm
Free heights under seat 35,5 cm-48,5 cm
Max. floor measurement (without footrests)
Depth 66 cm With 50 cm
Weight 16 kg
Max. Load 125 kg
Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on all 4 wheels.
Height adjustment Telescopic legs of stainless steel with 7 adjustments, distance 20 mm.
Seat/back/seat lid Seat: 45 mm thick P.U. foam Back: 25-40 mm thick P.U. foam Seat lid: 25 mm P.U. foam
Surface/metal ALL STAINLESS STEEL and powder lacquered
Description: Item number: M2 Shower/commode chair. With armrest going to the side. With curved armrests 310030
M2 Shower/commode chair. With armrest going to the side. With straight armrests 310029
M2 with extra large hole. With armrest going to the side. With curved armrests 310090
M2 with extra large hole. With armrest going to the side. With straight armrests 310032
ACCESORIES: (See brochures for more details)
Extra charge when you want pads on the armrests 310043
Foot rests for M2 310049
Bucket with lid for all seats. 310048
Stainless steel bedpan 330017
Extra charge for chair delivered with “hip-patient” seat 310250
Leg rests with elevation. Set with one for each side. 1 calf rest for each. 310052
Leg rest with elevation. One for right leg. With one calf rest. 310053
Leg rest with elevation. One for left leg. With one calf rest. 310054
One leg rest with elevation and one normal footrest. Elevational for left leg. One calf rest for the elevational.
310055
One leg rest with elevation and one normal footrest. Elevational for right leg. One calf rest for the elevational.
310056
Extra calf rest. 310358
Plastic cover for leg rests with elevation. One piece. 310058
Adjustable head support. Including mounting set 310059
Drip stand for mounting on M2’s. Incl. Mounting kit. 310050
Mounting kit for drip stand (without the drip stand itself) 310051
Standard seat for M2. 310340
Seat lid for standard seat 310341
Seat with extra large hole for M2. 310342
Seat lid for seat with extra large hole 310343
White foam seat for shower/commode chairs. 330016
14.08.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
38
M2 Shower/commode chair without wheels Height adjustable in stainless steel
The chair can be adjusted from 450 - 570 mm
(height at seat) through 7 adjustments with 20 mm interval. This can be done without any tools by
moving a clip.
It can be adjusted, so it is 20 mm higher in the front than behind.
The chair has a padded seat and back, which are
soft and very durable.
⇑ Chair with seat with extra large hole and
armrests going straight up. Article no.: 310098
⇑Chair with standard seat and armrests going straight up.
Article no.: 310097
With the chair follows a lid which covers the whole
seat.
If you wish the chairs can be delivered with pu foam cushions on the armrests.
Technical data and item no.: Please see back .
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
39
Technical data:Shower/Commode chair M2 without wheels. ALL STAINLESS STEEL Seat heights Ca. 44,5 cm-46,5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm
Seat width 46,5 cm
Seat depth 44 cm
Heights (by handles) 84 cm-97 cm
Max. width (by armrests) 58 cm
Width between armrests 46 cm
Free heights under seat 35,5 cm-48,5 cm
Max. floor measurement (without footrests)
Depth 66 cm With 50 cm
Weight 16 kg
Max. Load 125 kg
Height adjustment Telescopic legs of stainless steel with 7 adjustments, distance 20 mm.
Seat/back/seat lid Seat: 45 mm thick P.U. foam Back: 25-40 mm thick P.U. foam Seat lid: 25 mm P.U. foam
Surface/metal ALL STAINLESS STEEL and powder lacquered
Description: Item number: Shower/commode chair M2 with armrests going straight up. (incl. seat lid and hanging for bucket). With standard seat. Without wheels (with telescopic legs)
310097
Shower/commode chair M2 with armrests going straight up. (incl. seat lid and hanging for bucket) With extra large hole. Without wheels (with telescopic legs)
310098
OTHER MODELS: SEE BROCHURES ABOUT THESE.
ACCESORIES: (See brochures for more details)
Extra charge when you want pads on the armrests 310043
Foot rests for M2 310049
Bucket with lid for all seats. 310048
Stainless steel bedpan 330017
Extra charge for chair delivered with “hip-patient” seat 310250
Leg rests with elevation. Set with one for each side. 1 calf rest for each. 310052
Leg rest with elevation. One for right leg. With one calf rest. 310053
Leg rest with elevation. One for left leg. With one calf rest. 310054
One leg rest with elevation and one normal footrest. Elevational for left leg. One calf rest for the elevational.
310055
One leg rest with elevation and one normal footrest. Elevational for right leg. One calf rest for the elevational.
310056
Extra calf rest. 310358
Plastic cover for leg rests with elevation. One piece. 310058
Adjustable head support. Including mounting set 310059
Drip stand for mounting on M2’s. Incl. Mounting kit. 310050
Mounting kit for drip stand (without the drip stand itself) 310051
Standard seat for M2. 310340
Seat lid for standard seat 310341
Seat with extra large hole for M2. 310342
Seat lid for seat with extra large hole 310343
White foam seat for shower/commode chairs. 330016
23/01-07
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
40
M2 Shower/commode chair with central brake Height adjustable in stainless steel
M2 with central brake is a completely new type of
shower / commode chair which locks all 4 wheels when pushing a button.
M2 with central brake is a
“Help the helper and users chair”.
It provides more security for the user while the chair is always locked on all 4 wheels and is stable and secure
on the floor.
+It helps the helper so it is much easier to lock all 4 wheels, you do not have to go all the way around the
chair to lock them. You just push the button.
The chair follows our standard dimensions and will fit
all standard toilets.
The chair is shown with accessories
Just one touch and all wheels are locked / unlocked. The button is placed convenient for both user and helper.
The seat can be clicked off and on, so you can change between the two seats. As an accessory you can have a lid which covers the whole seat.
The chairs can be delivered with pu foam on the armrests.
Technical data and item numbers: See backside
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
41
Shower/commode chair model M2 with central brake in stainless steel Technical data
Seat heights 55,5 cm
Seat width 46,5 cm
Seat depth 44 cm
Heights (by handles)
96 cm
Max. width (by armrests)
58 cm
Width between armrests
47,5 cm
Free heights under seat
48,5 cm
Max. floor measurement (without footrests)
Depth 67 cm With 50 cm
Weight 24,2 kg
Max. Load 150 kg
Hjul 125 mm wheels with grey rubber, ball bearings and central braking system. Seat/back Seat: 45 mm thick P.U. foam Back: 25-40 mm thick P.U. foam
Electrical engine/battery system
El-tightness = IP65 (dustproof and protected against water beams)
Surface/metal ALL STAINLESS STEEL and powder lacquered
Description: Article no: Shower/commode chair model M2 with central brake. Standard seat. (incl. hanging for bucket)
310208
Shower/commode chair model M2 with central brake. Seat with X-large hole. (incl. hanging for bucket)
310209
Seat lid for standard seat 310341
Seat lid for seat with extra large hole 310343
Foot rests for M2 310049
Bucket with lid for all seats. 310048
Stainless steel bedpan 330017
Adjustable head support. Including mounting set 310059
Calfrest, grey netweave 310226
For more accessories: See accessories brochures.
21/6-2011
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
42
M2 Shower/commode chair Self-propelled with 24” Wheels Height adjustable in stainless steel
(lightweight Magnesium wheels)
This version of the M2 chair is made with massive 24-inch wheels.
The rims and spokes are made out of lightweight Magnesium for greater driving
comfort
It comes in two versions: With standard seat and with seat with extra large hole.
(You can change between the two seat types by clicking the seats of and on)
If you want the chair with a smaller width, you can get it delivered without the driving handle
on the wheels.
The chair is height adjustable in 3 heights:: Seat height; 47 cm-49 cm-56 cm
The propelling wheels have two hand breaks. The front wheels are 125 mm (with brakes).
With the chair follows a lid which covers the whole seat.
With x-large hole
⇐Without driving handles
As standard the chair is fitted with 2 anti-tip bars for extra
safety.
The chair got a continuously variable handbrake in aluminium
on the two Self-propelling wheels.
The self-propelling wheels got quick release axles so it is easy to
remove the wheels for cleaning and height-adjusting
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
43
Tech. data: M2 shower/commode chair. Stainless steel. Height adjustable, Self-Propelled.
Seat heights 47 cm-49 cm-56 cm
Seat width 46,5 cm
Heights at the top points(at the handles) 88 cm-90 cm-97 cm
Biggest total width (at the back-wheels) 63 cm (width without driving handle on=60 cm)
Width between armrests. 46 cm
Free height under seat 38 cm-40 cm-46,5 cm
Max. floor measurement (without footrests) Depth 75,5 cm width 63 cm (without driving handle 60 cm)
weight 17,6 kg
Max. Load 125 kg
Wheels Front wheels: 125 mm wheels with grey rubber and ball bearing. Back wheels: 24” (61 cm) Magnesium wheels, 3 spokes and massive PUR.
Brakes Handbrakes in aluminium and stainless steel
Height adjusting At front wheels: Telescopic legs off stainless steel with 3 adjustments. Height is adjusted with clips. At back wheels: With the help of a wrench key you move the bushings to the back wheels. Brakes: With the help of a wrench key you move the brakes.
Seat/back/seat lid Seat: 4,5 cm thick P.U. foam. Back: 2,5-4 cm thick P.U. foam Seat lid: 2,5 cm P.U. foam.
Surface/metal Stainless steel. Powder lacquered.
Description: Item number: Shower/commode chair M2 with armrest straight up and with self-propelling 24 “ wheels. (Incl. seat lid and hanging for bucket). STANDARD SEAT
310037
Shower/commode chair M2 with armrest straight up and with self-propelling 24 “ wheels. (Incl. seat lid and hanging for bucket). WITH EXTRA LARGE HOLE.
310038
ACCESORIES: (See brochures for more details)
Extra charge when you want pads on the armrests 310043
Foot rests for M2 310049
Bucket with lid for all seats. 310048
Stainless steel bedpan 330017
Leg rests with elevation. Set with one for each side. 1 calf rest for each. 310052
Leg rest with elevation. One for right leg. With one calf rest. 310053
Leg rest with elevation. One for left leg. With one calf rest. 310054
One leg rest with elevation and one normal footrest. Elevational for left leg. One calf rest for the elevational.
310055
One leg rest with elevation and one normal footrest. Elevational for right leg. One calf rest for the elevational.
310056
Extra calf rest. 310358
Plastic cover for leg rests with elevation. One piece. 310058
Adjustable head support. Including mounting set 310059
Drip stand for mounting on M2’s. Incl. Mounting kit. 310050
Mounting kit for drip stand (without the drip stand itself) 310051
Standard seat for M2. 310340
Seat lid for standard seat 310341
Seat with extra large hole for M2. 310342
Seat lid for seat with extra large hole 310343
White foam seat for shower/commode chairs. 330016
13.09.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
44
M2 Shower/commode chair self-propelled, Boxed Height adjustable in stainless steel
(with 24” lightweight Magnesium wheels)
This version of the M2 has a detachable back rest meaning it can be packed in a much
smaller box.
The wheels are lightweight magnesium which gives extra droving comfort
The chair comes in two versions: one with a standard seat, and one with a seat with XL-
hole. The seats can easily be switched with the click on system.
The chairs is height adjustable in three
positions (seat height): 47 cm-49 cm-56 cm
With the chair follows a lid which
covers the whole seat
With x-large hole
Minimum transport cost and
storage needed. (24” wheels are in separate box)
As standard the chair is fitted with 2 anti-tip bars for extra
safety.
The chair got a continuously variable handbrake in aluminium
on the two Self-propelling wheels.
Quick release axles makes it easier to remove the wheels for cleaning and height-adjusting
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
45
M2 Shower/commode chair self-propelled, Boxed Seat heights 47 cm-49 cm-56 cm
Seat width 46,5 cm
Heights at the top points(at the handles) 88 cm-90 cm-97 cm
Biggest total width (at the back-wheels) 63 cm (width without driving handle on=60 cm)
Width between armrests. 46 cm
Free height under seat 38 cm-40 cm-46,5 cm
Max. floor measurement (without footrests) Depth 75,5 cm width 63 cm (without driving handle 60 cm)
weight 17,6 kg
Max. Load 125 kg
Wheels Front wheels: 125 mm wheels with grey rubber and ball bearing. Back wheels: 24” (61 cm) Magnesium wheels, 3 spokes and massive PUR.
Brakes Handbrakes in aluminium and stainless steel
Height adjusting At front wheels: Telescopic legs off stainless steel with 3 adjustments. Height is adjusted with clips. At back wheels: With the help of a wrench key you move the bushings to the back wheels. Brakes: With the help of a wrench key you move the brakes.
Seat/back/seat lid Seat: 4,5 cm thick P.U. foam. Back: 2,5-4 cm thick P.U. foam Seat lid: 2,5 cm P.U. foam.
Surface/metal Stainless steel. Powder lacquered.
Description: Item number: Shower/commode chair M2 with armrest straight up and with self-propelling 24 “ wheels. (Incl. seat lid and hanging for bucket). STANDARD SEAT
310702
Shower/commode chair M2 with armrest straight up and with self-propelling 24 “ wheels. (Incl. seat lid and hanging for bucket). WITH EXTRA LARGE HOLE.
310703
ACCESORIES: (See brochures for more details)
Extra charge when you want pads on the armrests 310043
Foot rests for M2 310049
Bucket with lid for all seats. 310048
Stainless steel bedpan 330017
Leg rests with elevation. Set with one for each side. 1 calf rest for each. 310052
Leg rest with elevation. One for right leg. With one calf rest. 310053
Leg rest with elevation. One for left leg. With one calf rest. 310054
One leg rest with elevation and one normal footrest. Elevational for left leg. One calf rest for the elevational.
310055
One leg rest with elevation and one normal footrest. Elevational for right leg. One calf rest for the elevational.
310056
Extra calf rest. 310358
Plastic cover for leg rests with elevation. One piece. 310058
Adjustable head support. Including mounting set 310059
Drip stand for mounting on M2’s. Incl. Mounting kit. 310050
Mounting kit for drip stand (without the drip stand itself) 310051
Standard seat for M2. 310340
Seat lid for standard seat 310341
21-2-2011
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
46
M2 Shower/commode chair 200 kg Height adjustable in stainless steel
M2 200 KG
The chair is shown with footrests that are accessory. (item nr. 310275)
The M2 200 KG is made for the larger users.
The chair is strengthened so that it can sustain user loads up too max. 200 kg.
Despite the fact that the chair is made for larger users, we have kept it in the simple style, which makes it easy to clean.
With a comfortable seat 10 cm wider than our standard seat we have ensured that you sit pleasantly, and
that there is space for most users.
The seat can be clicked on and off in the same way as our traditional standard seat. (NB! It only comes with seat with x-large hole)
Easy height adjustable through telescopic legs.
The height adjustable footrests can be swung to the side for easier access to the chair.
The seat can easily be removed for cleaning.
This chair comes with PU foam on the armrests as standard.
Technical data and item numbers: See backside.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
47
M2 Shower/commode chair 200 kg Technical data
Seat Heights With 125 mm wheels = 46 48 50 52 54,5 cm. On wish the chair can be delivered with 100 mm casters. This will give the following seat heights: 43,5 – 45,5 – 47,5 – 49,5 – 52 cm
Weight 18,5 kg
Seat width 56 cm
Seat depth 44 cm
Maximum width 68 cm
Space between armrests 56 cm
Maximum lenght (without footrests)
68.5 cm
Maximum load 200 kg
Wheels 125/100 mm wheel with grey rubber and ball bearing. Double action brakes on three wheels. (4th is a directional controlling wheel)
Back 39 cm x 20 cm. P.U. foam 2.5-4 cm thick
Foam parts Seat: 4,5 cm thick P.U. foam. Seat lid: 2,5 cm P.U. foam. Armrest Cushions 2,5 cm P.U. foam
Surface/metal Frame
Stainless steel. Powder lacquered.
Description Item no: ISO no.: Shower/commode chair model M2 200 kg, with 125 mm wheels 310272 09 12 03
Chair delivered with 100 mm casters. 310220
Footrests for M2 200/300 KG 310275
Bucket with lid 310048
Accessories: Headrest, calf support, etc. See accessory brochures
14/01/11
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
48
M2 Shower/commode chair 200 kg Motor Height adjustable in stainless steel
M2 200 kg-Motor is designed for extra large users. The chair is special made and load tested to up to 200 kg.
It is equipped with a joystick to control forward, backward driving and turning. It helps the user to independently get in and out of the shower more easily.
Additionally, moving heavy users is easier because of the power from the motor.
With a PU foam seat, that is 10 cm larger than our standard seat, we have made sure that the user is sitting comfortably and that there is room for basically any user.
The joystick ensures easy control of the chair. Without the use of tools the
joystick can be moved from the user to a holder on the handles where the
helper can handle it. The speed is adjustable. There is a
horn, and an indicator that shows how much power there is on the battery.
When the user let the joystick go, the rear wheels brake immediately. This
ensures the safety of the user when he or she is in the shower or on the toilet.
As standard follows a lid, which covers
the whole seat.
This chair comes with PU foam on the armrests as
standard.
The height adjustable
footrests are re-enforced to carry heavy weight.
They can be lifted on and off without the use of
tools.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
49
M2-motor Shower /commode chair stainless steel Technical data:
Seat height 56,5 cm
Seat width 56 cm
Seat Depth 44 cm
Height at highest point 97 cm
Max width 71,5 cm
Width between armrests 56 cm
Free height under seat 46 cm
Length (without footrests)
71 cm
Turning circle App. 100 cm without footrests.
Weight App. 30 kg
Max. Load 200 kg
Wheels Front wheels: 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on both wheels. Rear wheels: 200 mm fixed wheels, connected to motor.
Foam Parts Seat: 4,5 cm P.U foam Lid: 2,5 cm P.U. foam Armrests 2,5 cm P.U. foam
Electric motor/ Batterysystem
Gear motor, Control box, Battery and joystick. Joystick with battery-indicator.
Tightness = IP65 (sealed against dust and protected against squirt/rays of water).
Metal/Surface; Frame Powder lacquered and ALL STAINLESS STEEL
Description: Item nr: ISO nr.: Shower/Commode chair M2 200 kg-Motor. (Incl. Open seat and lid) 310274
Height adjustable footrests to M2-200/300 kg 310275
Bucket with lid for all seats. 310048
More accessories : See Section with accessories. 11/1/11
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
50
M2 Shower/commode chair 300 kg Height adjustable in stainless steel
M2 300 KG
The chair is shown with accessories.
The M2 300 KG is made for the larger users. The chair is strengthened so that it can take users at a maximum of 300 kg.
The chair can go over the toilet. The armrests can be folded up and removed, and the users can easily move them away themselves.
Despite the fact that the chair is made for larger users we have made it simple so it is very easy to clean.
With a comfortable seat of 56 cm in width, we have ensured that you sit pleasantly; we have also made more room behind the seat, so there is space for most users.
The seat can be clicked on and off in the same way as our traditional standard seat.
(NB! It only comes with seat with x-large hole)
This chair comes with PU foam on the armrests as standard. The height adjustable footrests can be pushed to the side.
On the chairs there are installed big 125 mm
wheels, one of them is directional controlled,
easy to drive with. These wheels meet the
assistant while working.
The seat can easily be removed for cleaning. The cover you can
buy as an accessory.
The armrests can be folded up for easier access to the chair and this
gives the best accessibility for wash and space for transfers.
Technical data and item numbers: See backside.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
51
M2 300 KG Technical data
Seat Height 56 cm. The chair is not height adjustable.
Seat width 55 cm
Seat depth 50 cm(Seat 44 cm)
Maximum width 70 cm
Space between armrests 60 cm
Maximum length (without footrests)
63 cm
Weight 20,4 kg
Maximum load 300 kg
Wheels 125 mm wheel with grey rubber band and ball bearings. Double action brakes on three wheels. The last wheel is a directional controlled wheel.
Back 39 cm x 20 cm. P.U. foam 2.5 -4 cm thick
Foam parts Seat: 4,5 cm thick P.U. foam. P.U. foam. Armrest Cushions 2,5 cm P.U. foam
Surface/metal Frame
Stainless steel. Powder lacquered.
Description Item no: ISO no.: Shower/commode chair model M2 300 kg, with 125 mm wheels 310280 09 12 03
Footrests for M2 200 / M2 300 KG 310275
Bucket with lid for all seats. 310048
Accessories: Cover, Headrest, calf support, etc. See accessory brochure
20/6-2011
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
52
M2 Shower/commode chair M2 Small Height adjustable in stainless steel
⇑ The armrests can be lifted and pushed aside.
(Can also simply be lifted of).
⇑ The seat clicks off and on for easy cleaning and change of seat type.
M2 for the small places and/or for the small users.
Outside width is app. 48 cm. Inside width between armrests is app. 38 cm.
Seat height adjustable from 45 cm-57 cm (no tools involved, just move a clip).
Is as standard delivered with: Four 100 mm closed rubber tires with double action brakes.
(Can also be delivered with 125 mm wheels), Seat lid and armrests pillows in p.u. foam and built in holder for bucket.
Curved pushing frame.
The chairs can be delivered with Standard seat or seat with x-large hole (Both with seat lid which covers the whole seat)
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
53
Shower/commode chair M2-SMALL. STAINLESS STEEL. Technical data: Seat heights Ca. 44,5 cm-46,5 cm-48,5 cm-50,5 cm-52,5 cm-54,5 cm-56,5 cm
Seat width 46,5 cm
Seat depth 44 cm
Total Heights (by curved pushing bar) 85 cm-97 cm
Max. width (by armrests) 48 cm
Width between armrests 38 cm
Free heights under seat 35,5 cm-48,5 cm
Max. Floor measurement (without footrests)
Depth 66 cm Width 48 cm
Weight 16 kg
Max. Load 125 kg
Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on all 4 wheels.
Height adjustment Telescopic legs of stainless steel with 7 adjustments, distance 20 mm.
Seat/back/seat lid Seat: 45 mm thick P.U. foam Back: 25-40 mm thick P.U. foam Seat lid: 25 mm P.U. foam
Surface/metal ALL STAINLESS STEEL and powder lacquered
Description: Item number: Shower/commode chair M2-SMALL (incl. seat lid and hanging for bucket). With standard seat.
310278
Shower/commode chair M2-SMALL (incl. seat lid and hanging for bucket). With seat with x-large hole.
310279
Accessories: (See accessories brochures about details) Foot rests for M2 310049 Bucket with lid for all seats. 310048 Stainless steel bedpan 330017 Extra charge for delivery with 125 mm wheels (instead of the standard 100 mm)
310219
For more accessories: See accessories brochures.
14.08.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
54
”Hip-patient” seat for M2 shower/commode chairs
To get the right sitting position for users with hip problems the M2 shower/commode chairs can be
delivered with a so called ”hip-patient” seat.
The seat can be tipped continuously variable up to app. 8
cm (=app. Max. 110).
The seat height at the back is easily adjusted with the help of a
finger screw in each side.
The ”hip-patient” seat is mounted with strong metal fittings in
stainless steel.
NB! With ”hip-patient” seat on a chair the seat cannot be clicked
off and on (as normally).
The hip-patient function is here shown on an M2 standard chair
with seat with extra large hole and armrests going straight up and pu foam pillows on the armrest (art.
no. 310036 and 310043)
When ordering a chair with ”hip-patient” seat do as follows: Order the M2 version you want. F. x.:
M2 standard chair with armrests going straight up Art. no: 310035
+ Possibly accessories f. x. pu foam pillows on armrests. Art. no: 310043
+ Extra charge for chair delivered with ”hip-patient” seat Art. no: 310250
NB! M2-Tip, M2-XL and M2 with 24-inch wheels cannot be delivered with “hip-patient” seat.
NB! You can also get a Mounting kit for “hip-patient” seat
function. (to be mounted on your own chair) (nb! It does not come with the pu foam seat. You use your own)
Technical data and item no.: Please see back.
The hip-patient function can also be delivered on chairs with intimate seat.
Hip-patient seat shown from behind in top position (app. 110).
The height (”the tip”) on the seat is adjusted continuously variable with the help of one finger
screw in each side.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
55
”HIP-PATIENT” SEAT ON M2 SHOWER/COMMODE CHAIRS Technical data:
Height adjustment possibilities at the back (”tilting”)
From 0 (normal seating position) up till max. app. 8 cm. = max. adjustment app. 110.
Seat Width 45 cm (normal M2 standard seat)
Seat depth 44 cm (normal M2 standard seat)
Metal All metal parts=stainless steel.
Weight Extra weight on chair with ”hip-patient” seat = 2,3 kg
Max. Load 125 kg
Total width on chair with ”hip-patient” seat
App. 58 cm (Same width as normally. The widest place is by the armrests/finger screws).
Description: Art. No: Extra charge for chair delivered with ”hip-patient” seat.
Order art. No: (plus the chairs art. No)
310250
NB! You can also get a Mounting kit for “hip-patient” seat function. (to be mounted on your own chair) (nb! It does not come with the pu foam seat. You use your own)
310251
Rgd. Different models and details on M2 shower/commode chairs: See brochures on these
20/4-12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
56
M2 shower/commode chairs, tilt-in-space & electric height adjustable M2 Shower/commode chair M2 El-‐Tip ....................................................................................... 57 M2 Shower/commode chair M2 Gas-‐Tip .................................................................................... 59 M2 Shower/commode chair M2 El-‐tip wide ............................................................................... 61 M2 Shower/commode chair M2 Flexi-‐tip ................................................................................... 63 M2 shower/commode chair Multi-‐tip –and accessories ............................................................. 67
Return to menu
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
57
M2 Shower/commode chair M2 El-Tip Height adjustable in stainless steel
The chair is shown with accessories.
Can be tipped 37 degrees backwards and 7 degrees forwards with the help of the built in electrical
engine. The electrical engine is battery driven and can
normally operate up and down 30-40 times by max. load before it have to be recharged. Simply applying
a pluck in the control box charges the batteries.
Height adjustable in 4 seat heights: 55,5 cm-57,5 cm-59,5 cm-61,5 cm
Flexible washable back part in net-weave. The back
part can be adjusted in the depth.
Can be delivered which 100 mm wheels (instead of the standard 125 mm), which gives a lowest seat
height of 53 cm. Comes as standard with: Normal seat, cover for the hole, p.u. Foam pillows for the armrests, lock on the armrests, double lockable 125 mm wheels on all 4
legs
Large accessories program such as: (See accessories brochures for details)
Height adjustable headrest, Height and depth adjustable headrest.
(Both the headrests can be adjusted in the width of the pu. foam pillow.).
”Push-away” footrests, Leg supports which with the help of Velcro tape can be adjusted in the depth.
Side support (for the upper body), Leg support (can be adjusted up till vertical)
Can also be delivered with standard seat (which is clicked
off and on) With the chair follows a lid which covers the whole seat.
Is delivered as standard with locks on the armrests
Simple remote control for up and down
movement.
The depth on the back part is adjusted by 2 buckles
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
58
M2-El-Tip. Tilt-In-Space Shower/commode chair Technical data:
Seat heights App. 55,5 cm-57,5 cm-59,5 cm-61,5 cm (If the chair is delivered with 100 mm wheels the lowest seat height is: 53 cm)
Seat width 46,5 cm
Seat depth 44 cm
Heights at the highest point
100 cm-102 cm-104 cm-106 cm
Biggest outside width(At engine)
59 cm
Width between armrests
46 cm
Free height under seat
46,5 cm-48,5 cm-50,5 cm-52,5 cm (if there is 100 mm wheels on the chair the lowest height under the seat is 43 cm).
Length Without footrests
77 cm
Weight 25,8 kg
Max. Load 140 kg
Wheels 125 mm wheels with grey rubber and ball bearings. Double working brakes on all 4 wheels.
Height adjustment Telescopic legs of stainless steel with 4 height adjustments with 2 cm’s interval. The height is adjusted with clips.
Back part 24cmx43,5cm. Depth adjustment up till 10 cm. Net-weave with sewed on webbing and 2 buckles for adjusting depth. Washable at max. 80 degrees. (CANNOT be put in a tumble dryer.)
Foam parts Seat: 4,5 cm thick P.U. foam. Seat lid: 2,5 cm P.U. foam. Armrest pillows 2,5 cm P.U. foam
Electrical engine/battery system
Continuously variable block able engine. Surface treated metal. The batteries can normally operate up and down 30-40 times before being charged.
El-tightness = IP66 (dustproof and protected against water beams) Surface/metal- frame
Stainless steel. Powder lacquered.
Description: Article no: Shower/commode chair M2-El-Tip with armrest going straight up and with standard seat. (Incl. Seat lid, pu foam on armrests and build in holder for bucket)
310210
Shower/commode chair M2-El-Tip with armrest going straight up and with seat with extra large hole. (Incl. Seat lid, pu foam on armrests and build in holder for bucket)
310211
Accessories such as; Footrests, head support, calf rests a.s.o. See accessories brochures. 11/1/11
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
59
M2 Shower/commode chair M2 Gas-Tip Height adjustable in stainless steel
The chair is shown with accessories.
Can be tipped 37 degrees backwards and 7 degrees forwards.
Is tipped with the help of a gas spring to relieve
the helper.
Height adjustable in 4 seat heights: 55,5 cm-57,5 cm-59,5 cm-61,5 cm
Flexible washable back part in net-weave. The
back part can be adjusted in the depth.
Can be delivered which 100 mm wheels (instead of the standard 125 mm), which gives a
lowest seat height of 53 cm.
Comes as standard with: Normal seat, cover for the hole, p.u. Foam pillows for the armrests,
lock on the armrests, double lockable 125 mm wheels on all 4 legs
Large accessories program such as: (See accessories brochures for details)
Height adjustable headrest,
Height and depth adjustable headrest. (Both the headrests can be adjusted in the width
of the p.u. foam pillow.). ”Push-away” footrests, Leg supports which with the help of Velcro tape can be adjusted in the
depth.
Technical data and item no.: Please see back.
Can also be delivered with intimate seat (which is clicked off and on) With the chair follows a lid which covers the
whole seat.
Is delivered as standard with locks on the armrests
User friendly handle for the gas spring
The depth on the back part is adjusted by 2 buckles
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
60
M2-Gas-Tip. Tilt-In-Space Shower/commode chair Technical data:
Seat heights App. 55,5 cm-57,5 cm-59,5 cm-61,5 cm (If the chair is delivered with 100 mm wheels the lowest seat height is: 53 cm)
Seat width 46,5 cm
Seat depth 44 cm
Heights at the highest point 100 cm-102 cm-104 cm-106 cm
Biggest outside width 57 cm (at armrests)
Width between armrests 46 cm
Free height under seat 46,5 cm-48,5 cm-50,5 cm-52,5 cm (if there is 100 mm wheels on the chair the lowest height under the seat is 43 cm).
Length Without footrests
74,5 cm
Weight 21 kg
Max. Load 140 kg
Wheels 125 mm wheels with grey rubber and ball bearings. Double working brakes on all 4 wheels.
Height adjustment Telescopic legs of stainless steel with 4 height adjustments with 2 cm’s interval. The height is adjusted with clips.
Back part 24 cmx43,5cm. Depth adjustment up till 10 cm. Net-weave with sewed on webbing and 2 buckles for adjusting depth. Washable at max. 80 degrees. (CANNOT be put in a tumble dryer.)
Foam parts Seat: 4,5 cm thick P.U. foam. Seat lid: 2,5 cm P.U. foam. Armrest pillows 2,5 cm P.U. foam
Gas spring. Braking system Continuously variable gas spring. Surface treated metal. Protected against water beams with a plastic cut. The brake on the spring is operated with a handle with cable.
Surface/metal- frame
Stainless steel. Powder lacquered.
Description: Article no: Shower/commode chair M2-Gas-Tip with armrest going straight up and with standard seat. (Incl. Seat lid, pu foam on armrests and build in holder for bucket)
310201
Shower/commode chair M2-Gas-Tip with armrest going straight up and with seat with extra large hole. (Incl. Seat lid, pu foam on armrests and build in holder for bucket)
310202
Bracket to avoid negative tip ( Only fits on M2-Gas-Tip) 800251
Accessories such as; Footrests, head support, calf rests a.s.o. See accessories brochures. 11/01-2011
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
61
M2 Shower/commode chair M2 El-tip wide Height adjustable in stainless steel. Max load; 200 kg.
When there is needed more space between the armrests you can easily choose the M2-El-Tip wide. With 56 cm between the armrests there is space for
most users.
Can be tipped app. 30 degrees backwards and 7 degrees forwards with the help of the built in electrical
engine.
The actuator can normally operate up and down 30-40 times by max. Load.
Seat height 58,5 cm. Can be delivered which 100 mm wheels (instead of the standard 125 mm), which gives a lowest seat height of
56 cm.
Comes as standard with: seat with extra large hole, cover for the hole, pu foam pillows for the armrests,
lock on the armrests, double lockable 125 mm wheels on all 4 legs
With the chair follows a lid, which covers the whole seat.
Large accessories program such as: (See accessories brochures for details)
Height adjustable headrest, Height and depth adjustable headrest.
(Both the headrests can be adjusted in the width of the pu foam pillow.).
Footrests, Leg supports which with the help of Velcro tape can be adjusted in the depth.
Side support (for the upper body).
Is delivered as standard with locks on the armrests
Simple remote control for up and down movement.
The depth on the back part is adjusted by 4 buckles
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
62
M2-El-Tip wide shower/commode chair. Stainless steel Technical data: Seat height App. 58,5
(If the chair is delivered with 100 mm wheels the lowest seat height is: 56 cm)
Seat width 56 cm
Seat depth 44 cm
Biggest outside width (At engine)
67,5 cm
Width between armrests
56 cm
Free height under seat
53 cm (If the chair is supplied with 100 mm wheels, the lowest height under the seat is 50,5 cm).
Length Without footrests
74 cm
Weight 29 kg
Max. load 200 kg
Wheels 125 mm wheels with grey rubber and ball bearings. Double working brakes on all 4 wheels.
Back part 30 cm x 53,5 cm. Depth adjustment up till 10 cm. Net-weave with sewed on webbing and 4 buckles for adjusting depth. Washable at max. 80 degrees. (CAN’T be put in a tumble dryer.)
Foam parts Seat: 4,5 cm thick pu foam. Seat lid: 2,5 cm pu foam. Armrest pillows 2,5 cm pu foam
Electrical engine/battery system
Continuously variable block able engine. Surface treated metal. The batteries can normally operate up and down 30-40 times before being charged.
El-tightness = IP66 (dustproof and protected against water beams) Surface/metal- frame
Stainless steel. Powder lacquered.
Description: Article no: Shower/commode chair M2-El-Tip wide with armrest going straight up and with
seat with extra large hole. (Incl. Seat lid, pu foam on armrests and build in holder for bucket)
310212
Calf rest for M2-El-Tip wide 310233
11/1/11
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
63
M2 Shower/commode chair M2 Flexi-tip Height adjustable in stainless steel
Shower/commode chair, with remote operated adjustable seat and back recline.
M2 Flexi-Tip, with electrical
operated tilt function and back recline.
The chair is very suitable for users who have had hip surgery, users in
pain, users with bone cancer, sclerosis, palsy, spasticity, users with low tone, brain damaged and
neurological users.
Specifications and article numbers backside page 2.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
64
M2 Shower/commode chair M2 Flexi-tip Height adjustable in stainless steel
This chair has big potential as
the many different seating positions will meet a whole
variety of demands.
The seat can be angled 7 degrees forward and 37 degrees backwards.
The angel between the backrest and seat
adjusted from 85 degrees to 130 degrees.
The chair is height adjustable through the
telescopic legs. Simple and without the use of tools.
Seat height can be adjusted from 56.5 cm to 62.5 cm. This will fit most toilets.
Specifications and article numbers backside page 2.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
65
M2 Shower/commode chair M2 Flexi-tip
Height adjustable in stainless steel
� The lock on the armrests automatically locks when
the armrests are lowered. Armrests can be removed for cleaning and easier access to the chair.
�
The closed castors are made so that they are maintenance free. They do not gather hair or any dirt
during showers.
� The simple remote is easy to understand and use
and does not require training of helpers/staff.
� The locking box makes it possible to lock the seat or
back in a desired position. This will help prevent mistakes where helpers/staff accidentally change the
angles.
� The flexible net weave back is easy to adjust and gives a
good and comfortable support for the back. With the adjustment it is possible to make the back rest fit
any user. The chair comes with a full cover lid, to give better
comfort when showering.
Specifications and article numbers page 2
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
66
M2 Shower/commode chair M2 Flexi-tip Height adjustable in stainless steel
Technical data: Seat height Ca. 56,5 cm-58,5 cm-60,5 cm-62,5 cm
(If the chair is delivered with 100 mm wheels, the lowest seat height is 54 cm)
Seat Width 46,5 cm
Seat Depth 44 cm
Maximum height 103 cm-105 cm-107 cm-109 cm
Maximum width 59 cm
Space between armrests
46 cm
Free height under seat
47,5 cm - 49,5 cm - 51,5 cm - 53,5 cm (with 100 mm wheels the lowest free height is 44 cm).
Length (without footrests)
77 cm
Weight App. 31 kg
Maximum load 125 kg
Wheels 125 mm wheels with grey rubber and ball bearings. Double working brakes on 3 wheels. The last one is a directional wheel.
Height adjustment Telescopic legs of stainless steel with 4 height adjustments with 2 cm’s interval. The height is adjusted with clips.
Back 24cmx43,5cm. Depth adjustment up till 10 cm. Net-weave with sewed on webbing and 2 buckles for adjusting depth. Washable at max. 80 degrees. (Not to be tumble dried.)
Foam parts Seat: 4,5 cm thick P.U. foam. Seat lid: 2,5 cm P.U. foam. Armrest pillows 2,5 cm P.U. foam
Motor/Batteries Continuously variable block able engine. Surface treated metal. The batteries can normally operate up and down 30-40 times before being charged.
El-tightness = IP66 (dustproof and protected against water beams) Surface/Metal Stainless steel. Powder lacquered
Description Item No. ISO nr.: M2 Flexi-Tip with standard seat 310216 09 12 03
M2 Flexi-Tip with seat with XL-hole 310217 09 12 03
Height adjustable footrests 310049
Bucket with lid for all seats. 310048
Accessories such as; Footrests, head support, calf rests a.s.o. See accessories brochures.
11/1/11
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
67
M2 shower/commode chair Multi-tip –and accessories
Electrical height adjustable shower/commode chair in stainless steel with el-tip function
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
68
M2 Multi-tip is a unique shower/commode chair, made to fulfil the
demands of the future.
The electric adjustment of the height is independent from the tip function. This enables to achieve the right working position and improves
the working environment for the helper.
The horizontal seat height can be adjusted
from 50 to 95 cm, and the seat angle can be tipped 5° forwards and 35° backwards, by
using the hand control.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
69
Working enviroment
M2 Multi-tip is the right choice, if you want to improve the helpers working environment
The chair can be adjusted independently in seat height and tip function. This gives the best opportunity to place the user in the correct position.
This gives a better working position for the helper, and more dignity for the user.
As standard, one of the wheels is a
direction controlled wheel. (dark grey brake)
This will ease the manoeuvring and secure the working environment for the helper.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
70
Better care
Provide a better and more dignified care for the elderly and disabled with the M2 Multi-tip.
With a low entering height at just 47 cm, the users who have the strength
can sit down themselves and are not forced to use a lift.
The electric height and tip function is stepless and independently adjustable.
The adjustable back rest ensures optimal support and the wide range of
accessories ensures a pleasant experience.
As standard equipment, you will
receive a comfortable hip strap for safety and it gives the user a good
sense of security.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
71
Accessories for M2 Multi-tip M2 Multi-tip can be supplied with a wide range of accessories.
Head supports for M2 Multi-tip
The user can safely lean back in the chair for
full relaxation.
No matter which model you choose, you will get a
safe and comfortable support.
Head support height x depth x width adjustable
Art. no.: 310871
Head support in Supersoft foam Height x width adjustable
Art. no.: 310870
Side supports
When using side supports the user will get extra support for the
entire body.
The side supports are pushed into the fixed holders without
any use of tools.
Sidestøtter (sæt) Vare nr.: 310880
Højre sidestøtte: Vare nr.: 310881
Venstre sidestøtte Vare nr.: 310882
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
72
Technical data
46 cm
61 cm
Total width 61cm
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
74
Accessories for M2 shower/commode chairs Hemiplegia armrests .................................................................................................................. 75 Head supports ........................................................................................................................... 77 Pu foam pillows on armrests ...................................................................................................... 79 Buckets/bedpan ......................................................................................................................... 81 Wheels ....................................................................................................................................... 83 Height adjustable ”push away” footrests .................................................................................... 85 Extended footrests ..................................................................................................................... 85 Footrests for XL chairs ............................................................................................................... 87 Amputation supports .................................................................................................................. 89 Leg rests with elevation ............................................................................................................. 91 Leg supports and heel stop ....................................................................................................... 93 Seats and foam seats ................................................................................................................ 95 Urine Funnel .............................................................................................................................. 97 Side supports ............................................................................................................................. 99 Cross bar and cross guard ...................................................................................................... 101 Hip strap .................................................................................................................................. 103 Drip stand ................................................................................................................................ 105
�
Return to menu
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
75
Hemiplegia armrests Accessories for M2 shower/commode chairs
Hemiplegia armrests with soft PU padding. Can be folded up and removed.
The PU pillow can be mounted in two depths using a hexagonal key.
This makes it possible to move the PU pillow 4 cm further back towards user, if required.
The picture is showing HEMI armrests mounted on a M2
with curved pushing frame.
Armrests on most of our chairs can be replaced with existing armrest on the
right, left or both sides.
Hemiplegia armrest is ideal for users
with hemiplegia, paraplegia, tetraplegia and others who need extra support at
the forearms.
On the backside you can see which M2 chairs the hemiplegia armrests can be used with.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
76
Accessories for shower / commode chair M2 HEMIPLEGIA ARMRESTS
Technical data
The HEMI armrests do not fit on M2 chairs with armrest going to the side, M2 small, M2 Mini chairs, M2 200 KG, M2 200 KG MOTOR and M2 300 KG.
Length of PU pillow: 30 cm. Width of PU pillow: 11 cm. Total length of armrest: 41,5 cm. 1 pcs. left HEMI armrest 800273 1 pcs. right HEMI armrest 800274 1 set of HEMI armrest 800275
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
77
Head supports
Accessories for M2 shower/commode chairs
⇐ Ord. Head support. Can be adjusted in height and width on the pu foam pillow. Holders for head
support are standard on M2-tip.
For other chairs you have to order a
set of mountings
⇐ Height, depth, angle and width adjustable
head support.
Holders for head support are
standard on M2-tip. For other chairs you have to order a
set of mountings
⇐The pu foam pillow is a
flexible type which can be adjusted in
width.
⇐
Head support shown mounted on
an ordinairy M2 chair.
Holders for head support are standard on M2-tip. For other chairs you have to
order a set of mountings
Super Soft height and depth adjustable headrest.
Super Soft height adjustable headrest.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
78
Technical data……..Accessories for M2 shower/commode chairs
Ordinary head support Height adjustment. Bottom to top
(Measured from the metal bar between the handles to the centre of the head support) 6,5 cm-32,5 cm
Depth (Measured from the metal bar between the handles to the centre of the head support)
8,5 cm
Angle adjustment of head support possible No
App. Depth on head support 13 cm
App. Width possibilities inside head support 10-21 cm
Mounted without use of tools Yes
Metal Stainless steel
Weight App. 1 kg
Article no: (Mountings are standard on M2-tip) 310221
Height and depth adjustable head support Height adjustment. Bottom to top
(Measured from the metal bar between the handles to the centre of the head support) 2,5 cm- 35 cm
Depth (Measured from the metal bar between the handles to the centre of the head support)
3 cm-16,5 cm
Angle adjustment of head support possible Yes
App. Depth on head support 13 cm
App. Width possibilities inside head support 10-21 cm
Mounted without use of tools Yes
Metal Stainless steel + ord. Steel
Weight Ca. 1,5 kg
Article no: (Mountings are standard on M2-tip) 310222
Head support + mounting set (for ordinary M2’s) To be mounted on ordinary M2 chairs. Is screwed on with the help of the screws for the back rest
Metal Stainless steel + ord. steel
Weight App. 2 kg
Art no.: Height and depth adjustable head support including mounting set 310059
Art no.: Ordinary head support including mounting set 310087
Art no.: Mounting set (without head support) 310320
Super Soft height adjustable headrest. Height adjustment. Bottom to top
(Measured from the metal bar between the handles to the centre of the head support) 6,5 cm-32,5 cm
Depth (Measured from the metal bar between the handles to the centre of the head support)
8 cm
Angle adjustment of head support possible No
App. Depth on head support 5,5 cm
Mounted without use of tools Yes
Metal Stainless steel
Weight Ca 0,8 kg
Article no: (Mountings are standard on M2-tip) 310236
Super Soft height and depth adjustable headrest. Height adjustment. Bottom to top
(Measured from the metal bar between the handles to the centre of the head support) 2,5 cm- 35 cm
Depth (Measured from the metal bar between the handles to the centre of the head support)
3 cm-16,5 cm
Angle adjustment of head support possible Yes
App. Depth on head support 5,5 cm
Mounted without use of tools Yes
Metal Stainless steel + ord. Steel
Weight Ca. 1,0 kg
Article no: (Mountings are standard on M2-tip) 310235
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
79
Pu foam pillows on armrests Accessories for M2 shower/commode chairs
Against an extra charge the armrests can be delivered with pu foam pillows on.
Is standard on: M2 Gas-tip, M2 El-tip, M2 Flexi-tip, M2 El-tip bred, M2 200 kg’s, M2 300 kg’s and small. On other chairs it has to be ordered as an extra.
Against an extra charge the armrests can be delivered with fast release locks on.
Can only be delivered on armrests with pu foam pillows.
Is standard on: M2 gas-tip, M2 el-tip, M2 Flexi-Tip, & M2 El-tip bred.
On other chairs it has to be ordered as an extra. Can not be put on M2 200 kg’s, M2 300 kg’s and M2 Small
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
80
Accessories for M2 shower/commode chairs
Technical data
Pu foam on armrests P.u. on straight armrests: Length: 25,5 cm. Width 5 cm. Thickness: 2,5 cm. The pu foam pillow is rounded over
the edge of the metal armrest.
P.u. foam on curved armrests: Length 23,5 cm. Width 5 cm. Thickness: 2,5 cm
Are standard on M2-Tip, M2 200 kg and M2 small.
For other chairs order this article number as an option for the chair. 310043
Armrest set with fast release locks Are standard on M2-Tip
Cannot be used on M2, 200 kg’s and M2, small.
If you want other chair types delivered with fast release locks on armrests you order this article number as an option for the chair.
800071
1 set of armrests with fast release locks. Straight armrests with pu foam. 800014
1 set of armrests with fast release locks. Curved armrests with pu foam.(del. 2-3weeks) 800112
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
81
Buckets/bedpan Accessories for M2 shower/commode chairs
Bucket with lid for all seats.
Fits on all M2 chairs (and seats).
Recommended for all chairs.
This intimate bucket can be cleaned up to 135 degrees.
ergonomic handle is designed for better handling of a loaded bucket
With bucket follows a lid
The bucket is mate with drain holes, the drain holes are also to mounting holes.
⇑Stainless steel bedpan w/lid.
Cannot be used on M2-Tip
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
82
Accessories for M2 shower/commode chairs
Technical data
Bucket with lid for all seats Diameter hole 23 cm
Length hole 33 cm
Depth 13 cm
Weight incl. lid 0,9 kg
This Bucket tolerate cleaning up to 135 degrees - RECOMMENDED FOR ALL M2 CHAIRS- Article no.: 26-02-2010
310048
Stainless steel bedpan w/lid Diameter 30,5 cm
Depth 16 cm
Hanging edge 2,5 cm
Weight 1,1 kg
Article no.: 330017
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
83
Wheels Accessories for M2 shower/commode chairs
⇐100 mm wheels.
Is standard on: M2 with armrests straight up, armrests to the side, M2 with curved pushing
frame and M2 small. M2-Tip chairs can be
delivered with 100 mm wheels if you want a
lower seat height
⇐125 mm wheels.
Is standard on: M2-Tip chairs.
Can against an extra charge be delivered on
ordinary M2 with armrests straight up, armrests to the
side, M2 with curved
pushing frame and M2 small. It gives easier
handling of the chair and higher seat height.
Directional controlling wheels: To all models of M2 (M2 24”) we can supply as accessories directional controlling wheels.
These wheels can be locked, so they will only drive straight forward. (These wheels are not possible
to brake. They can always roll forward.) This makes it easier to start pushing the chair and it will be easier to push the chair straight forward. It is mainly recommended when there is a heavy user
in the chair and when you have to drive the chair through long corridors, and where the foundation isn’t in level.
⇐On telescopic leg with 7 holes for M2 with armrests straight up, armrests to the
side, M2 with curved pushing frame and M2 small. Can be supplied with 100 mm. wheels
or with 125 mm.
⇐ On telescopic leg with 4
holes for M2-tip. Can be supplied with 125 mm
wheels or with 100 mm.
⇐The dark grey brake indicates that this wheel is the directional controlling wheel.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
84
Accessories for M2 shower/commode chairs
100 mm wheels with ball bearings. Are standard on: M2 with armrests straight up, armrests to the side, M2 with curved pushing frame, M2 small and
M2, 200 kg’s low. M2-Tip chairs can be delivered with 100 mm wheels if you want a lower seat height
Order this article number for 100 mm wheels as an option on the chair: 310220
125 mm wheels with ball bearings
Are standard on: M2-Tip chairs and M2, 200 kg’s. M2 with armrests straight up, armrests to the side, M2 with curved pushing frame and M2 small can be delivered
with 125 mm wheels. (NB! The seat height will be 2½ cm higher with 125 mm wheels.
Order this article number for 125 mm wheels as an option on the chair 310219
100 mm directional controlling wheel with ball bearings. To be mounted on all M2 models except for M2 24”.
The M2 chairs can as well be ordered with on directional controlling wheel.
1 directional controlling wheel on telescopic leg with 7 adjustments for M2 with armrests
straight up, armrests to the side, M2 with curved pushing frame and M2 small. 800150
1 directional controlling wheel on telescopic leg with 4 adjustments for M2-tip. 800152
1 directional controlling wheel for M2 200 kg’s 800154
If you want to have a new chair delivered with one directional controlling wheel and 3 ordinary wheels order this article number as well as the chairs article number.
800157
125 mm directional controlling wheels with ball bearings To be mounted on all M2 models except M2 24”.
The M2 chairs can as well be ordered with on directional controlling wheel.
1 directional controlling wheel on telescopic leg with 7 adjustments for M2 with armrests
straight up, armrests to the side, M2 with curved pushing frame and M2 small (only if the chairs
are with 125 mm. wheels.)
800151
1 directional controlling wheel on telescopic leg with 4 adjustments for M2-tip. 800153
1 directional controlling wheel for M2 200 kg’s low. 800155
If you want to have a new chair delivered with one directional controlling wheel and 3 ordinary wheels order this article number as well as the chairs article number.
800157
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
85
Accessories for M2 shower/commode chair M2 Footrests
Height adjustable ”push away” footrests
With one grip they can either be pushed a side or under the chair. You can
adjust the height with the help of a clip.
Extended footrests
Extra-long footrests so even the tallest user will sit properly.
The footrests are extended with a total of 10 cm, and are reinforced, so they can handle up to 150 kg.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
86
Technical data Height adjustable footrests
7 height adjustments
2 cm between each level
Weight set with two pieces 1,2 kg
Adjust the height with the help of clips. The footrests are of stainless steel and the foot plate of hard plastic.
Article no.: 310049
Extended footrests 7 height adjustments
2 cm between each level
Weight set with two pieces
2,0 kg
Adjust the height with the help of clips. The footrests are of stainless steel and the foot plate of hard plastic.
Article no.: 310283
01.11.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
87
Accessories for M2 shower/commode chairs
Footrests for XL chairs
Footrests M2, 200 kg’s and M2 300 kg’s.
Height adjustable footrests 200+300kg. With one grip they can either be pushed a side or under the chair. You can adjust the height with the help of a clip.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
88
Technical data……..Accessories for M2 shower/commode chairs
Height adjustable footrests for M2, 200 kg’s and 300 kg’s
7 height adjustments
2 cm between each level
Weight set with two pieces 2,6 kg
Adjust the height with the help of clips. The footrests is of stainless steel and the foot plate of hard plastic.
Article no.: 310275
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
89
Accessories for shower/commode chair M2 Amputation supports
The amputation supports can be mounted on all of our M2 models. They are mounted the same way as the standard foot rests.
The support plates are made in soft PU foam. Despite the softness of the support plates, they still manage to give the stability and support needed.
The angle can easily be adjusted by a simple press of a button on the outside of the amputation support.
It has five angles and can be
adjusted from horizontal and down.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
90
Accessories for shower/commode chair M2
Technical data Amputations support
Number of adjustments to horizontal angle
5 adjustments
Washable at: 80 degrees
Mounted without use of tools
Yes
Made from stainless steel, support foam in PU
Weight for one piece.: App. 1,1 kg
Art. no. right: 800343
Art. no. left: 800344
01.11.12
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
91
Leg rests with elevation Accessories for M2 shower/commode chairs
Leg rest with elevation. Can be elevated in 6 positions (up till horizontal) .
Can be put an all models of M2 chairs without use of tools.. As standard each leg rest comes with one calf rest. The calf rest can be adjusted in the length of the leg rest with
a finger screw.
Fits all M2 chairs from December 2000 and newer.
Leg rest with elevation can be used on M2, 200 kg’s. with MAX. user weight until 140 kg.
The height is easily adjusted with the help of a finger lock on the side of the leg rest.
Extra calf rests can be put on if necessary
As accessories you can get footrest plates to be put on elevational leg rests. They are screwed on the end of the leg rest..
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
92
Technical data……..Accessories for M2 shower/commode chairs
Leg rests with elevation
Max. Length (from chair) To end of calf rest 73 cm
Height adjustment possibilities (up till horizontal) 6 positions
Calf rest size W14, 5cmxL 21,5cm
Weight leg rests. Pr. Set 3,4 kg
Comes with one calf rest as standard.
Comes with protection cover for adjustment
Metal = Stainless steel
Fits all M2 chairs from Dec. 2000 and newer. (Can be used on M2, 200 kg’s with MAX. user weight until 140 kg.) Leg rests with elevation. Set with one for each side. 1 calf rest for each. 310052
Leg rest with elevation. One for right leg. With one calf rest. 310053
Leg rest with elevation. One for left leg. With one calf rest. 310054
One leg rest with elevation and one normal footrest. Elevational for left leg. One calf rest for the elevational.
310055
One leg rest with elevation and one normal footrest. Elevational for right leg. One calf rest for the elevational.
310056
Extra calf rest. 310057
Footrest plates
Plate distance from seat (with one leg-support on) 34,5-72,5 cm
Weight 0,6 kg
Stainless steel+plastic
Order for right or left side
Foot rest plate, for right side 310085
Foot rest plate, for left side 23/01-07
310086
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
93
Accessories for M2 shower/commode chair
Leg supports and heel stop
The leg support is made from net weave and can be adjusted by velcro around the foot rests.
The leg support can be used on all M2 shower/commode chairs, and it exists in two sizes:
standard and XL.
The leg support is recommended for all tip-chairs, as it prevents the legs to slide backwards from the foot supports, while being tipped.
The leg support is depth adjustable and can be washed in a washing machine.
As an alternative one can choose to get heel
stops mounted onto the foot supports.
It prevents the feet to slide backwards of the footplates.
The footplates can still be pushed aside with
the heel straps mounted.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
94
Technical data Calf support
Height on calf support 17 cm
Depth adjustment possible Yes
Washable at: 80 degrees
Mounted without use of tools Yes
Made of washable plastic net weave with Velcro tape for adjustment
Weight App. 0,3 kg
Article no: 310226
Technical data Calf support 200 and 300 kg
Height on calf support 17 cm
Depth adjustment possible Yes
Washable at: 80 degrees
Mounted without use of tools Yes
Made of washable plastic net weave with Velcro tape for adjustment
Weight App. 0,3 kg
Article no: 310233
01.11.12
Technical data Heel straps for foot rests
Height on heel strap 4,5 cm
Depth adjustment possible No
Washable at: 80 degrees
Mounted without use of tools No
Made from washable strap. Nuts and bolts in galvanized steel.
Weight: Ca. 0,3 kg
Article no.: 310285
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
95
Seats and foam seats Accessories for M2 shower/commode chairs
Standard seat Seat with extra large hole Lid
⇑All M2’s (except M2, 200 kg’s) can be delivered with either standard seat or seat with extra large hole. The seat is 4,5 cm thick and made with integrated soft pu foam. Bucket holder is integrated as well.. The seats are clicked off and on the chair frame. With this system you can easily change between the two seat types. Lid
comes as standard when you buy a chair.
Supersoft white foam seat White foam seat
⇑ Supersoft white foam seat made of polymer foam. Without cover.
Is tied on top of the normal seat with 4 strings. Comes with hole and without hole.
⇑White foam seat with plastic cover. All edges are welded.
Is tied on top of the normal seat with 4 strings
Seat with small hole
⇑ Liner with aperture in PU foam.
Can be placed directly on top of a standard M2 seat to provide a softer seating and a smaller aperture. Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
96
Technical data……..Accessories for M2 shower/commode chairs All measurements are approximately
Seats
Standard seat Seat with extra large hole Width 46,5 cm 46,5 cm
Length 44 cm 44 cm
Thickness Seat 4,5 cm. At bucket holder 9 cm. Seat 4,5 cm. At bucket holder 9 cm.
Length of hole 26,5 cm 26,5 cm + length of the extra hole on 11 cm
Width of hole 22 cm 22 cm. Width at the extra hole 11,5 cm
Material and construction. Wooden plate with metal mountings (bucket holder). With integrated pu foam all the way round
Wooden plate with metal mountings (bucket holder). With integrated pu foam all the way round
Mounting Is clicked of and on the chair frame Is clicked of and on the chair frame
Cleaning By disinfectioning: You can use; Ethanol and Propanoll solutions. Otherwise use ordinary non-alcoholic soaps. Max.70 degrees.
By disinfectioning: You can use; Ethanol and Propanoll solutions. Otherwise use ordinary non-alcoholic soaps. Max.70 degrees.
Weight 3,2 kg 3,0 kg
You decide the seat type when you order the chair. (Seat lid comes as standard)
Art number del: As spare part: Art nr.: 310340 (nb! When ordered as spare part it does not come with seat lid. Seat lid is ordered separately art nr. 310341)
As spare part: Art nr.: 310342 (nb! When ordered as spare part it does not come with seat lid. Seat lid is ordered separately art nr. 310343)
Supersoft white foam seat Width 46 cm
Length 41,5 cm
Thickness 3 cm
Length of hole 26 cm
Width of hole 19 cm
Material and construction. Supersoft white polymer foam. Without cover.
Mounting Is attached on top of the ordinary seat with the 4 strings.
Cleaning Is cleaned with soap water or alcohol. Max. 40 degrees. You can not wash it in a washing machine as it can go out of shape.
Weight 0,13 kg
Art number WITH hole 330018. WITHOUT hole 330022.
White foam seat Width 44,5 cm
Length 42 cm
Thickness 3 cm
Length of hole 26 cm
Width of hole 18 cm
Material and construction. Soft foam pillow with white plastic cover, which is welded on all edges.
Mounting Is attached on top of the ordinary seat with the 4 strings.
Cleaning Is cleaned with soap water or alcohol. Max. 40 degrees. You can not wash it in a washing machine as it can go out of shape.
Weight 0,3 kg
Art number 330016
Seat with small hole Width 43 cm
Length 46 cm
Thickness 2,5 cm
Length of hole 20 cm
Width of hole 17,5 cm
Material and construction. PU black
Mounting Are placed on top of the ordinary seat. Comes with plastic mountings, which are screwed, on the bottom. The plastic mountings are placed so they will fit into the hole of the ordinary seat.
Cleaning Is cleaned with soap water or alcohol. Max. 40 degrees.
Weight 1,6 kg
Art number
800178
24/1-11
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
97
Urine Funnel Accessories for M2 shower/commode chairs
Plastic Urine Funnel is for persons who have problems urinating into the toilet
The Urine Funnel is used by placing the narrow end facing down towards the toilet, so as to help prevent the person from urinating on the floor or on the toilet seat.
Wash at max. 80 degrees Celsius.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
98
Technical data……..Accessories for M2 shower/commode chairs
Urine Funnel Made from 2 mm ABS Plastic
Wash at max. 80 degrees Celsius.
Colour: Grey.
Width 8,2 cm
Depth 10,4 cm
Length 26,8 cm
Item no. 148861
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
99
Side supports Accessories for M2 shower/commode chairs
Depth adjustable side supports. The side supports are pushed into the holders without the use of tools.
Holders for side supports are standard on M2-tip. For other chairs you have to order a set of mountings
The side support pillows can if needed be turned upside down.
Holders for side supports (can also be used for mounting of cross guard)
Holders for side supports are standard on M2-tip. For other chairs you order this mounting set which is screwed on with the screws from the back rest.
Side supports holders can also be mounted together with head support holder.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
100
Technical data……..Accessories for M2 shower/commode chairs
Side supports P.u. foam pillow size. 15 x 22 cm
Pillow distance from handle bar 5,5 cm
Adjustment possibilities (measured from handle bar and inwards) 6 cm
Mounted without the use of tools Yes
Metal Stainless steel
Weight(one set 2 pieces) App. 1,2 kg
Mountings for side supports are standard on M2-tip. For other chairs you need a mounting set art no. 310227
Art no. One set (2 pieces): 310223
Article no. One for right side 310225
Article no. One for left side 310224
Side support/Cross guard holders Set with 2 pcs. which are mounted with the enclosed screws.
Metal: Stainless Steel
Weight (set with 2 pcs.): 0,5 kg
Holders are standard on M2-tip. For other chairs order as underneath
Article no. (set with 2 pcs.): 310227
Article no.: One for right side 310230
Article no.: One for left side 23/01-07
310231
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
101
Cross bar and cross guard Accessories for M2 shower/commode chairs
⇑ Crossbar to be placed on the two armrests to give extra support to the user. Is fastened with the two
rubber bands. Cannot be used on M2, 200 kg’s and M2, small, but on all other M2 chairs.
⇑ Cross guard to be placed so it gives support in front of the user. Cannot be used on M2 200 kg and M2 small , but on all other M2 chairs.
On M2-Tip holders are standard, on other chairs you need to mount a set of holders.
⇑ Holder for side supports/Cross guard Holders for cross guard are standard on M2-tip. For other chairs you order this mounting set, which is screwed on with the help
of the screws for the back rest. Cross guard holders can be mounted together with holders for head support.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
102
Technical data……..Accessories for M2 shower/commode chairs
Crossbar Total length: 62,5 cm
Diameter of foam part: App. 36 mm
Metal: Stainless Steel
Rubber bands: Rubber
Weight: 0,8 kg
Article no. (Cannot be used on M2, 200 kg’s and m2, small) 310228
Cross guard Total width: 62,5 cm
Depth: (from back rest to centre of guard) App. 37 cm
Diameter of foam part: App.34 mm
Metal: Stainless Steel
Weight : 1,6 kg
Article no. (Cannot be used on M2 200 kg and M2 small) 310229 For ordinary M2’s you need a set of holders article no. 310227 as well. On M2-Tip-Chairs holders on the chairs are standard. If you use a cross guard you cannot have side supports on the chairs as well.
Side support/Cross guard holders Set with 2 pcs. which are mounted with the enclosed screws.
Metal: Stainless Steel
Weight (set with 2 pcs.): 0,5 kg
Holders are standard on M2-tip. For other chairs order as underneath
Article no. (set with 2 pcs) 310227
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
103
Hip strap Accessories for M2 shower/commode chairs
⇑Hip strap as extra security for the user. (Opened/closed with velcro)
Can be mounted on all M2 chairs
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
104
Technical data……..Accessories for M2 shower/commode chairs
Hip strap 2 pcs 5 cm wide nylon straps which are opened/closed with velcro. Are mounted without the use of tools
Right side strap is 82 cm long. Left strap is 58 cm long.
Fits a person with a diameter at maximum: 150 cm
Washable at Maximum 60 degrees
Weight (set ): 0,2 kg
Art no (set): Fits all chairs 330019
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
105
Drip stand Accessories for M2 shower/commode chairs
Drip stand with holder. Can be mounted on M2 shower-
/commode chair. (Can’t be used on M2-Tip)
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
106
Technical data……..Accessories for M2 shower/commode chairs
Drip Stand
Height possibility 1,69-2,1 m
Weight (including drip stand) 1,5 kg
Weight (without drip stand) 0,2 kg
Do not fit on M2-Tip
Article number: Drip stand including bush/drip stand for M2 310050
Article number: Drip stand including bush for M2 9-1-07
310051
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
107
M2 mini shower/commode chairs M2 mini standard ..................................................................................................................... 108 M2 mini self-propelled with 20” wheels .................................................................................... 110 M2 mini el-tip. .......................................................................................................................... 112
Return to menu
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
108
M2 mini standard Height adjustable shower commode chair in stainless steel
M2 mini standard is designed for small size users.
CHILDREN AS WELL AS SMALL ADULTS.
The adjustments make the
shower commode chair a very flexible one, which makes it possible to keep for several years, while the user grows
older and taller.
(note! The chair is shown with accessories)
Height adjustable armrests.
15,5 cm - 28,5 cm From seat.
Backrest made of net-weave, is depth adjustable. The backrest is equipped
with 7 buckles, for maximum comfort, each separately
adjustable.
For enhanced manoeuvring and
comfort, the handles are height adjustable and can be angled 90 degrees to the sides
as well.
Seat with gap and full covering lid is standard.
The shower commode chair is equipped with 100 mm. Wheels and are height adjustable
in 5 positions.
The shower commode chair is prepared with holders for
headrest and side supporters.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
109
Model M2 mini standard. Height adjustable shower commode chair. Stainless steel.
Technical data Seat heights App.: 40,5 cm-42,5 cm-44,5 cm-56,5 cm-48,5 cm
The lid adds 1,5 cm to the height. Seat width 46 cm Seat depth 37,5 cm Seat depth (measured from the back)
32,5 cm
Width between armrests 34 cm Height of armrest from seat 15,5 cm – 28,5 cm Height of back-rest (measured from seat)
From 5 cm to 46,5 cm
Heights (by handles) 8 positions. The heights are adjusted by clips (no tools). The handles can be angled to the sides for easier manoeuvring
Max. width (by armrests) 47,5 Free heights under seat 33,2 cm, 35,2 cm, 37,2 cm, 39,2cm, 41,2 cm, Max. Floor measurement (without footrests)
Length 53 cm
Weight 13,4 kg Max. Load 80 kg Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake
on all 4 wheels. Height adjustment Telescopic legs of stainless steel with 5 adjustments,
with 20 mm interval. Adjust with clips, no tools Seat/seat lid Seat: 35 mm thick P.U. foam
Seat lid: 15 mm P.U. foam Back rest Net weave adjustable with 7 buckles. Wash at 80 degrees Celsius do
not tumble dry.
Surface/metal powder lacquered and ALL STAINLESS STEEL Description: Item number: Shower/commode chair M2 mini with armrests going straight up. (incl. seat lid and hanging for bucket) With in seat and lid.
310500
ACCESORIES: (See brochures for more details) Height adjustable foot rests for M2 mini 310510 Long height adjustable foot rests M2 mini 310049 Calf Rest 310226 Plastic bucket for M2 mini 310516 Side supporters M2 mini. (Height- depth and width) 310512 Headrest M2 mini. (Height – Depth – angel – adjustable).The head rest can bend smaller or bigger)
310511
Hip strap M2 mini. (Is tightened with Velcro) 310515
05/11/04
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
110
M2 mini self-propelled with 20” wheels Height adjustable shower commode chair in stainless steel
M2 mini with self-propelled wheels
is designed for small users; CHILDREN AS WELL AS SMALL
ADULTS.
The self-propelled wheels give the user more possibilities of being independent from nurses and
further help.
(nb! The chair is shown with accessories)
Height adjustable armrests.
15,5 cm - 28,5 cm
From seat.
Backrest made of net-weave, is depth
adjustable. The backrest is equipped
with 7 buckles, for maximum comfort, each separately adjustable.
Height adjustable armrests.
15,5 cm - 28,5 cm From seat.
Seat with gap and full covering lid is standard
The chair is height adjustable
in 3 positions.
As standard the chair is fitted with 2 anti-tip bars for extra
safety.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
111
Model M2 mini, self-propelled with 20” wheels.
Height adjustable shower/commode chair. STAINLESS STEEL
Technical data:
Seat height: App.: 42 cm, 44 cm, 51 cm The lid ads 1,5 cm to the height.
Seat width 46 cm
Seat depth 37,5 cm
Seat depth (measured from the back) 32,5 cm
Width between armrests 34 cm
Height of armrest from seat 15,5 to 28,5 cm
Height of back-rest (measured from seat)
From 5 cm to 46,5 cm
Height adjustable handles 8 positions. The heights are adjusted by clips (no tools). The handles can be angled to the sides for easier manoeuvring
Heights (by handles) 121 cm, when chair and handles are in most extended positions
Max. Width (by wheels 64 cm
Free heights under seat 35,5 cm, 37,5 cm, 44,5 cm
Max. Floor measurement (without footrests)
69,5 cm
Weight 17,4 kg
Max. load 80 kg
Wheels
Rear wheels: Spokes, axe and bearings is of stainless steel. The wheels are of massive PUR
Front wheels: 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on both wheels.
Height adjustable wheels Front: Telescopic stainless steel. Height is adjusted with clips (no tools).
Rear: with the help of wrench, the bushings on the back wheels. Brakes: Use a wrench to move the brakes to or away from the wheels
Anti-tip safety: Height is adjusted by moving clips (no tools).
foam Seat: 2.5 cm P.U. Foam. Seat cover: 1.5 cm P.U. Foam Armrests: 2.5cm P.U. Foam
Back rest Net weave adjustable with 7 buckles. Wash at 80 degrees Celsius do not tumble dry.
Metal/surface; Frame Powder lacquered and ALL STAINLESS STEEL
Description Item no: ISO nr.:
Shower/Commode Chair M2 mini with self propelled wheels, open seat and angel adjustable handles (incl. Lit and prepared for bucket)
310501
Accessories: (for details, see Brochure)
Height adjustable foot rests M2 mini 310510
Long height adjustable foot rests M2 mini 310049
Bucket M2 mini 310516
Side supporters M2 mini. (Height- depth and width) 310512
Headrest M2 mini. (Height – Depth – angel – adjustable). The head rest can bend smaller or bigger)
310511
Hip strap M2 mini. (is tightened with Velcro) 310515
Calf rest (White Nylon net weave with Velcro) 310226
05/11/04
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
112
M2 mini el-tip. Height adjustable shower commode chair in stainless steel
M2 mini el-tip is designed for small size users. CHILDREN AS WELL AS SMALL ADULTS.
For users with disturbed balance and without the
ability to sit in a regular shower/commode chair. Or for people who tend to fall/slide forward in a regular shower/commode chair, this chair exhibits a smooth and uninterrupted movement between its maximum positions, the action assures complete comfort and
convenience for the user.
The smooth tilt and the wide range of accessories available, ensures safety while showering (and using
the toilet function). The waterproof motor (IP 65) can tilt the seat 37
degrees backwards and 7 degrees forward.
The shower commode chair is height adjustable in 5 positions:
46 cm, 48 cm, 50 cm, 52 cm & 54 cm above the ground.
When tilted forward, the front edge of the seat is just
44 cm from the floor, when the shower/commode chair is in lowest position. This makes it easier to sit
for users who are able to stand themselves.
Backrest, made of net-weave, is depth adjustable. The backrest is equipped with 7 buckles, for
maximum comfort, each separately adjustable.
Seat with gap and full covering lid is
standard.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
113
Model M2 mini el-tip. Height adjustable shower/commode chair. STAINLESS STEEL.
Technical data:
Seat heights app. 46 cm-48 cm-50 cm-52 cm-54 cm
The lid ads 1,5 cm to the height. Seat width 46 cm
Seat depth 37.5 cm
Seat depth (measured from the back) 32,5 cm
Width between armrests 34 cm
Heights of armrest from seat 15.5 to 28.5 cm
Height of back-rest (measured from seat)
From 5 cm to 46,5 cm
Handles height adjustable 8 positions. The height is adjusted by clips (no tools). The handles can be angled to the sides for easier manoeuvring
Max. height 126 cm, when chair and handles are in most extended pos. Biggest outside width (by motor) 59.5 cm
Free height under seat 39 cm-41 cm-43 cm-45 cm-47 cm
Full length (without footrests) 65.5cm
Vægt 23.6 kg
Max. Load 80 kg
Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on all 4 wheels
Height adjustments Telescopic legs of stainless steel with 5 adjustments, with 20 mm interval. Adjust with clips, no tools
Back rest Net weave adjustable with 7 buckles. Washable at 80 degrees. Do not tumble dry.
Foam parts Seat: 2.5 cm P.U. Foam. Seat cover: 1.5 cm P.U. Foam Armrests: 2.5cm P.U. Foam
El-motor/ Battery system
Continuously variable blockable motor. Batteries can, under normal circumstances activate the tilting function 30-40 times before recharging is needed. Tightness = IP66 (Dustproof and protected against dust and squirt/rays of water).
Metal/surface; Frame Powder lacquered and ALL STAINLESS STEEL Description: Item no: ISO no.:
Shower/Commode chair M2 mini el-tip, open seat and adjustable handles (angles/heights) (incl. Seat prepared for bucket and full covering lid).
310502
Accessories: (for details, see Brochure)
Height adjustable foot rests M2 mini 310510
Long height adjustable foot rests M2 mini 310049
Bucket M2 mini 310516
Side supporters M2 mini. (Height- depth and width) 310512
Headrest M2 mini. (Height – Depth – angel – adjustable).The head rest can bend smaller or bigger)
310511
Hip strap M2 mini. (Is tightened with Velcro) 310515
Calf rest (White Nylon net weave with Velcro) 310226
11/1/11
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
114
M2 mini el-tip Height adjustable shower commode chair in stainless steel
Armrests are equipped with locks.
Height adjustable armrests.
15,5 cm - 28,5 cm From seat.
For enhanced maneuvering and
comfort, the handles are height adjustable and can
be angled 90 degrees to the sides as well.
Backrest made of net-weave, is depth
adjustable. The backrest is equipped with 7
buckles, for maximum comfort,
each separately adjustable
Seat with gap and full covering lid is
standard
Remote control for activating the tilting
function (Tilting: 7 degrees
forward and 37degrees backwards).
The shower commode chair is equipped with 100 mm. Wheels and
are height adjustable in 5
positions
The shower commode chair is
prepared with holders for headrest and side supporters
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
115
Model M2 mini el-tip. Height adjustable shower/commode chair. STAINLESS STEEL.
Technical data:
Seat heights app. 46 cm-48 cm-50 cm-52 cm-54 cm
The lid ads 1,5 cm to the height. Seat width 46 cm
Seat depth 37.5 cm
Seat depth (measured from the back) 32,5 cm
Width between armrests 34 cm
Heights of armrest from seat 15.5 to 28.5 cm
Height of back-rest (measured from seat)
From 5 cm to 46,5 cm
Handles height adjustable 8 positions. The height is adjusted by clips (no tools). The handles can be angled to the sides for easier manoeuvring
Max. height 126 cm, when chair and handles are in most extended pos. Biggest outside width (by motor) 59.5 cm
Free height under seat 39 cm-41 cm-43 cm-45 cm-47 cm
Full length (without footrests) 65.5cm
Vægt 23.6 kg
Max. Load 80 kg
Wheels 100 mm wheels w/grey rubber and ball bearing. Double-acting brake on all 4 wheels
Height adjustments Telescopic legs of stainless steel with 5 adjustments, with 20 mm interval. Adjust with clips, no tools
Back rest Net weave adjustable with 7 buckles. Washable at 80 degrees. Do not tumble dry.
Foam parts Seat: 2.5 cm P.U. Foam. Seat cover: 1.5 cm P.U. Foam Armrests: 2.5cm P.U. Foam
El-motor/ Battery system
Continuously variable blockable motor. Batteries can, under normal circumstances activate the tilting function 30-40 times before recharging is needed. Tightness = IP66 (Dustproof and protected against dust and squirt/rays of water).
Metal/surface; Frame Powder lacquered and ALL STAINLESS STEEL Description: Item no: HMI no: ISO no.:
Shower/Commode chair M2 mini el-tip, open seat and adjustable handles (angles/heights) (incl. Seat prepared for bucket and full covering lid).
310502
Accessories: (for details, see Brochure)
Height adjustable foot rests M2 mini 310510
Long height adjustable foot rests M2 mini 310049
Bucket M2 mini 310516
Side supporters M2 mini. (Height- depth and width) 310512
Headrest M2 mini. (Height – Depth – angel – adjustable).The head rest can bend smaller or bigger)
310511
Hip strap M2 mini. (Is tightened with Velcro) 310515
Calf rest (White Nylon net weave with Velcro) 310226
11/1/11
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
116
Accessories for M2 mini shower/commode
chairs Hip strap .................................................................................................................................................. 117 Side supports ........................................................................................................................................... 119 Calf rest ................................................................................................................................................... 121 Commode pan ......................................................................................................................................... 123 Foot rests ................................................................................................................................................. 125 Head supports ......................................................................................................................................... 127
Return to menu
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
117
Hip strap
Accessories for M2 mini shower/commode chairs
Hip strap. Open and close with Velcro.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
118
Technical data M2-Mini accessories
Hip strap 2 pieces of each 5 cm wide nylon band. Open and close with Velcro. Is Mounted without the use of tools.
Right band is 82 cm long. Left is 58 cm long.
Wash at Max. 60°C
Weight (set) 0,2 kg
Item no.: 310515
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
119
Side supports
Accessories for M2 mini shower/commode chairs
Side supports with soft and comfortable P.U.
foam pads. Can be adjusted in
height, depth and width without the use of
tools.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
120
Technical data M2-Mini accessories
Side supports P.u. foam size. 12 x 16,5 cm
Height adjustable 5,5 cm
Adjustments of distance from centre of chair(from each side) 4,5 cm
Depth adjustment 4,5 cm
Metal Stainless steel
Weight (one set, two pieces.) App. 1,2 kg
Item no.: For one set (two pieces): 310512
Item no. For right side: 310514
Item number for left side 310513
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
121
Calf rest Accessories for M2 mini shower/commode chairs
Calf rest made in white net weave. Depth adjustable with Velcro.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
122
Technical data M2-Mini accessories
Calf Rest Height of calf rest 16,5 cm
Depth adjustable Yes
Wash at Max. 80°C
Made of washable plastic with net weave and adjustable Velcro band
Weight App.:. 0,3 kg
Item no.: 310226
Item no.: 310515
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
123
Commode pan Accessories for M2 mini shower/commode chairs
.
Bucket Especially fitted for the M2 mini seat
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
124
Technical data M2-Mini accessories
Commode pan with lid for M2 mini Size of opening 19,5 cm x 28,5
Depth 10.5 cm
Weight 0,5 kg
Item no.: 310516
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
125
Foot rests Accessories for M2 mini shower/commode chairs
Footrests for M2-mini. Height
adjustable in 7 positions.
Regular standard M2 footrests
Also fit our M2 Mini. Is suitable in situations
where the user requires a footrest with
longer adjustments possibilities.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
126
Technical data M2-Mini accessories
Height adjustable footrests M2 mini
7 positions, short length from seat to footrests.
2 cm between each position
Weight (set of two). 1,1 kg
Clips without the use of tools adjust heights. Hangers fare in stainless steel, the footrests plates are in hard plastic
Item no.: 310510
Long height adjustable footrests for M2 mini
7 positions, Further distance from seat to footrests.
2 cm between each position
Weight (set of two). 1,1 kg
Clips without the use of tools adjust heights. Hangers fare in stainless steel, the footrests plates are in hard plastic
Item no.: 310049
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
127
Head supports Accessories for M2 mini shower/commode chairs
⇐ Ord. Head support. Can be adjusted in height and width on the pu foam pillow. Holders for head
support are standard on M2-tip.
For other chairs you have to order a
set of mountings
⇐ Height, depth, angle and width adjustable
head support.
Holders for head support are
standard on M2-tip. For other chairs you have to order a
set of mountings
⇐The pu foam pillow is a
flexible type which can be adjusted in
width.
⇐ Head support
shown mounted on an ordinairy M2
chair. Holders for head
support are standard on M2-tip. For other chairs you have to
order a set of mountings
Super Soft height and depth adjustable headrest.
Super Soft height adjustable headrest.
Technical data and item no.: Please see back.
telephone: +44 (0)191 516 2080 email: [email protected] website: www.lynchhc.com
128
Technical data; Accessories for M2 shower/commode chairs
Ordinary head support Height adjustment. Bottom to top (Measured from the metal bar between the handles to the centre of the head support)
6,5 cm-32,5 cm
Depth (Measured from the metal bar between the handles to the centre of the head support)
8,5 cm
Angle adjustment of head support possible No
App. Depth on head support 13 cm
App. Width possibilities inside head support 10-21 cm
Mounted without use of tools Yes
Metal Stainless steel
Weight App. 1 kg
Article no: (Mountings are standard on M2-tip) 310221
Height and depth adjustable head support Height adjustment. Bottom to top (Measured from the metal bar between the handles to the centre of the head support)
2,5 cm- 35 cm
Depth (Measured from the metal bar between the handles to the centre of the head support)
3 cm-16,5 cm
Angle adjustment of head support possible Yes
App. Depth on head support 13 cm
App. Width possibilities inside head support 10-21 cm
Mounted without use of tools Yes
Metal Stainless steel + ord. Steel
Weight Ca. 1,5 kg
Article no: (Mountings are standard on M2-tip) 310222
Head support + mounting set (for ordinary M2’s) To be mounted on ordinary M2 chairs. Is screwed on with the help of the screws for the back rest
Metal Stainless steel + ord. steel
Weight App. 2 kg
Art no.: Height and depth adjustable head support including mounting set 310059
Art no.: Ordinary head support including mounting set 310087
Art no.: Mounting set (without head support) 310320
Super Soft height adjustable headrest. Height adjustment. Bottom to top (Measured from the metal bar between the handles to the centre of the head support)
6,5 cm-32,5 cm
Depth (Measured from the metal bar between the handles to the centre of the head support)
8 cm
Angle adjustment of head support possible No
App. Depth on head support 5,5 cm
Mounted without use of tools Yes
Metal Stainless steel
Weight Ca 0,8 kg
Article no: (Mountings are standard on M2-tip) 310236
Super Soft height and depth adjustable headrest. Height adjustment. Bottom to top (Measured from the metal bar between the handles to the centre of the head support)
2,5 cm- 35 cm
Depth (Measured from the metal bar between the handles to the centre of the head support)
3 cm-16,5 cm
Angle adjustment of head support possible Yes
App. Depth on head support 5,5 cm
Mounted without use of tools Yes
Metal Stainless steel + ord. Steel
Weight Ca. 1,0 kg
Article no: (Mountings are standard on M2-tip) 310235
Top Related