Shower Door Hardware - Amazon S3€¦ · Shower Door Hardware. Index Shower Hinges Shower Door...
Transcript of Shower Door Hardware - Amazon S3€¦ · Shower Door Hardware. Index Shower Hinges Shower Door...
Shower Door Hardware
IndexShower Hinges
Shower Door Knobs
Shower Door Pull Handles
Shower Door Polycarbonates
Page
1-4
5
6-7
8
1
Classic Shower Hinges
Wall to Glass(full back plate)Product CodeSHS037L-PBSHS037L-CPSHS037L-BNSHS037L-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
Used for Standard Wall to Glass installation. Available with fullback plate and short back plate. Short back plate allows theglass to be placed closer to the wall.
Specifications:Solid Brass Drop Forged ConstructionStainless Steel Reversible Pivot Pin with 0 and 5 positive stopGlass Sizes: 3/8” (10mm) to 1/2”(12mm) tempered glassStainless Steel Hardened coil springsHinge design to fit industry standards templates90 opening anglesAccessories - gaskets/ screws, allen wrench, template
o o
o
Capacity
Utilizing 2 hinges
Utilizing 3 hinges
Packaging: 1 pc per box
Door Weight
80 lbs
120 lbs
Door Width3/8” (10mm)
28”
32”
Door Width1/2” (12mm)
26”
30”
(Short back plate)Product CodeSHS037S-PBSHS037S-CPSHS037S-BNSHS037S-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
180 Glass to GlassProduct CodeSHS180-PBSHS180-CPSHS180-BNSHS180-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
Used to mount a door to a fixed glass side panel that runsat a 180 degree angle to the door.
Used to mount a door to a fixed glass side panel thatruns at a 135 degree angle to the door.
Used to mount a door to a fixed glass side panel thatruns at a 90 degree angle to the door.
Standard Reversible Pivot PinEach Hinge contains a reversible Pivot Pin.The hinge comeswith the Pivot Pin set for regular closing position (wall meetsdoor at 90o). The opposite side of the pin has beenmachined at 5o, and will provide tighter door closure (85o)by simply rotating the Pivot Pin half-way around.
Custom Pivot PinCustom Pivot Pin are available for “off-angle” installations. Ifthe Standard Reversible 5o Pivot Pin contained in the hingedoes not assist in closing the door to the position desired, youmay specify the angle needed for a Custom Pivot Pin.
o
135 Glass to GlassProduct CodeSHS135-PBSHS135-CPSHS135-BNSHS135-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
o
90 Glass to GlassProduct CodeSHS090-PBSHS090-CPSHS090-BNSHS090-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
o
2
Elegance Shower Hinges
Wall to Glass(full back plate)Product CodeSHR037L-PBSHR037L-CPSHR037L-BNSHR037L-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
Used for Standard Wall to Glass installation. Available with fullback plate and short back plate. Short back plate allows theglass to be closer to the wall.
Specifications:Solid Brass Drop Forged ConstructionStainless Steel Reversible Pivot Pin with 0 and 5 positive stopGlass Sizes: 3/8” (10mm) to 1/2”(12mm) tempered glassStainless Steel Hardened coil springsHinge design to fit industry standards templates90 opening anglesAccessories - gaskets/ screws, allen wrench, template
o o
o
Capacity
Utilizing 2 hinges
Utilizing 3 hinges
Packaging: 1 pc per box
Door Weight
80 lbs
120 lbs
Door Width3/8” (10mm)
28”
32”
Door Width1/2” (12mm)
26”
30”
(Short back plate)Product CodeSHR037S-PBSHR037S-CPSHR037S-BNSHR037S-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
180 Glass to GlassProduct CodeSHR180-PBSHR180-CPSHR180-BNSHR180-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
Used to mount a door to a fixed glass side panel that runsat a 180 degree angle to the door.
Used to mount a door to a fixed glass side panel thatruns at a 90 degree angle to the door.
Standard Reversible Pivot PinEach Hinge contains a reversible Pivot Pin.The hinge comeswith the Pivot Pin set for regular closing position (wall meetsdoor at 90o). The opposite side of the pin has beenmachined at 5o, and will provide tighter door closure (85o)by simply rotating the Pivot Pin half-way around.
Custom Pivot PinCustom Pivot Pin are available for “off-angle” installations. Ifthe Standard Reversible 5o Pivot Pin contained in the hingedoes not assist in closing the door to the position desired, youmay specify the angle needed for a Custom Pivot Pin.
o
135 Glass to GlassProduct CodeSHR135-PBSHR135-CPSHR135-BNSHR135-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
o
90 Glass to GlassProduct CodeSHR090-PBSHR090-CPSHR090-BNSHR090-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
o
Used to mount a door to a fixed glass side panel thatruns at a 135 degree angle to the door.
3
Silhouette Shower Hinges
Wall to Glass(full back plate)Product CodeSHB037L-PBSHB037L-CPSHB037L-BNSHB037L-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
Used for Standard Wall to Glass installation. Available with fullback plate and short back plate. Short back plate allows theglass to be placed closer to the wall.
Specifications:Solid Brass Drop Forged ConstructionStainless Steel Reversible Pivot Pin with 0 and 5 positive stopGlass Sizes: 3/8” (10mm) to 1/2”(12mm) tempered glassStainless Steel Hardened coil springsHinge design to fit industry standards templates90 opening anglesAccessories - gaskets/ screws, allen wrench, template
o o
o
Capacity
Utilizing 2 hinges
Utilizing 3 hinges
Packaging: 1 pc per box
Door Weight
80 lbs
120 lbs
Door Width3/8” (10mm)
28”
32”
Door Width1/2” (12mm)
26”
30”
(Short back plate)Product CodeSHB037S-PBSHB037S-CPSHB037S-BNSHB037S-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
180 Glass to GlassProduct CodeSHB180-PBSHB180-CPSHB180-BNSHB180-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
Used to mount a door to a fixed glass side panel that runsat a 180 degree angle to the door.
Used to mount a door to a fixed glass side panel thatruns at a 90 degree angle to the door.
Standard Reversible Pivot PinEach Hinge contains a reversible Pivot Pin.The hinge comeswith the Pivot Pin set for regular closing position (wall meetsdoor at 90o). The opposite side of the pin has beenmachined at 5o, and will provide tighter door closure (85o)by simply rotating the Pivot Pin half-way around.
Custom Pivot PinCustom Pivot Pin are available for “off-angle” installations. Ifthe Standard Reversible 5o Pivot Pin contained in the hingedoes not assist in closing the door to the position desired, youmay specify the angle needed for a Custom Pivot Pin.
o
135 Glass to GlassProduct CodeSHB135-PBSHB135-CPSHB135-BNSHB135-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
o
90 Glass to GlassProduct CodeSHB090-PBSHB090-CPSHB090-BNSHB090-ORB
FinishPolished Brass
Bright ChromeBrushed Nickel
Oil Rubbed Bronze
o
Used to mount a door to a fixed glass side panel thatruns at a 135 degree angle to the door.
4
Shower Hinge Glass cut-out
46 (1 13/16”) 1/8”~1/4”(3.2~6.4)
39.7 (1 9/16”)
2- 19 ( 2 3/4”)
65.1
(2
9/16
”)
olol
60.3
(2
3/8”
)
36.5 (1 7/16”) 36.5 (1 7/16”)
3.2~6.4 (1/8~1/4”)
42.9 (1 11/16”)42.9 (1 11/16”)
65.1
(2 9
/16”
)
60. 3
(2
3/8
”)
4- 19.1 ( 2 3/4”)
ol
ol 42.9 (1 11/16”)4- 19 ( 2 3/4”)
olol 42.9 (1 11/16”)
36.5 (1 7/16”) 36.5 (1 7/16”)
3.2~6.4 (1/8”~1/4”)
65.1
(2
9/16
”)
60.3
(2
3/8
”)
42.9 (1 11/16”)4- 19 ( 2 3/4”)
olol
4.8 (3/16”)
36.5 (1 7/16”)
47.6 (1 7/8”)
54 (2 1/8”)
65.1
(2 9
/16”
)
60.3
(2
3/8
” )
45° CHAMFERON FIXED PANELONLY
46 (1 13/16”) 1/8”~1/4”(3.2~6.4)
39.7 (1 9/16”)
2- 19 ( 2 3/4”)
65.1
(2
9/16
”)
olol
60.3
(2
3/8”
)
36.5 (1 7/16”) 36.5 (1 7/16”)
3.2~6.4 (1/8~1/4”)
42.9 (1 11/16”)42.9 (1 11/16”)
65.1
(2 9
/16”
)
60. 3
(2
3/8
”)
4- 19.1 ( 2 3/4”)
ol
ol 42.9 (1 11/16”)4- 19 ( 2 3/4”)
olol 42.9 (1 11/16”)
36.5 (1 7/16”) 36.5 (1 7/16”)
3.2~6.4 (1/8”~1/4”)
65.1
(2
9/16
”)
60.3
(2
3/8
”)
42.9 (1 11/16”)4- 19 ( 2 3/4”)
olol
4.8 (3/16”)
36.5 (1 7/16”)
47.6 (1 7/8”)
54 (2 1/8”)
65.1
(2 9
/16”
)
60.3
(2
3/8
” )
45° CHAMFERON FIXED PANELONLY
46 (1 13/16”) 1/8”~1/4”(3.2~6.4)
39.7 (1 9/16”)
2- 19 ( 2 3/4”)
65.1
(2
9/16
”)
olol
60.3
(2
3/8”
)
36.5 (1 7/16”) 36.5 (1 7/16”)
3.2~6.4 (1/8~1/4”)
42.9 (1 11/16”)42.9 (1 11/16”)
65.1
(2 9
/16”
)
60. 3
(2
3/8
”)
4- 19.1 ( 2 3/4”)
ol
ol 42.9 (1 11/16”)4- 19 ( 2 3/4”)
olol 42.9 (1 11/16”)
36.5 (1 7/16”) 36.5 (1 7/16”)
3.2~6.4 (1/8”~1/4”)
65.1
(2
9/16
”)
60.3
(2
3/8
”)
42.9 (1 11/16”)4- 19 ( 2 3/4”)
olol
4.8 (3/16”)
36.5 (1 7/16”)
47.6 (1 7/8”)
54 (2 1/8”)
65.1
(2 9
/16”
)
60.3
(2
3/8
” )45° CHAMFERON FIXED PANELONLY
46 (1 13/16”) 1/8”~1/4”(3.2~6.4)
39.7 (1 9/16”)
2- 19 ( 2 3/4”)
65.1
(2
9/16
”)
olol
60.3
(2
3/8”
)
36.5 (1 7/16”) 36.5 (1 7/16”)
3.2~6.4 (1/8~1/4”)
42.9 (1 11/16”)42.9 (1 11/16”)
65.1
(2 9
/16”
)
60. 3
(2
3/8
”)
4- 19.1 ( 2 3/4”)
ol
ol 42.9 (1 11/16”)4- 19 ( 2 3/4”)
olol 42.9 (1 11/16”)
36.5 (1 7/16”) 36.5 (1 7/16”)
3.2~6.4 (1/8”~1/4”)
65.1
(2
9/16
”)
60.3
(2
3/8
”)
42.9 (1 11/16”)4- 19 ( 2 3/4”)
olol
4.8 (3/16”)
36.5 (1 7/16”)
47.6 (1 7/8”)
54 (2 1/8”)
65.1
(2 9
/16”
)
60.3
(2
3/8
” )
45° CHAMFERON FIXED PANELONLY
Wall to Glass
Dimensions: (Unit: mm)
180 Glass to Glass
135 Glass to Glass
90 Glass to Glasso o
o
5
Shower Door Knobs
Specifications:Material: Solid Brass Diameter: 3/4” (19mm)Glass Thickness Range: 1/4” (6mm) to 1/2”(12mm) Extension from Door: 1-1/4” (30mm)Maximum glass hole diameter: 1/2” (12mm)Finishes: Polished Brass, Bright Chrome & Brushed Nickel
Product CodeSDK03X1-PBSDK03X1-CPSDK03X1-BN
FinishPolished Brass
Bright ChromeBrushed Nickel
The Shower Door Knob is made of Solid Brass and is idealfor standard frameless swinging doors.
Product CodeSDK06X2-PBSDK06X2-CPSDK06X2-BN
FinishPolished Brass
Bright ChromeBrushed Nickel
Product CodeSDK03X2-PBSDK03X2-CPSDK03X2-BN
FinishPolished Brass
Bright ChromeBrushed Nickel
Product CodeSDK04X2-PBSDK04X2-CPSDK04X2-BN
FinishPolished Brass
Bright ChromeBrushed Nickel
Product CodeSDK06X2-PBSDK06X2-CPSDK06X2-BN
FinishPolished Brass
Bright ChromeBrushed Nickel
Product CodeSDK04X1-PBSDK04X1-CPSDK04X1-BN
FinishPolished Brass
Bright ChromeBrushed Nickel
Product CodeSDK05X1-PBSDK05X1-CPSDK05X1-BN
FinishPolished Brass
Bright ChromeBrushed Nickel
Product CodeSDK06X1-PBSDK06X1-CPSDK06X1-BN
FinishPolished Brass
Bright ChromeBrushed Nickel
6
Shower Door Pull Handles
Product Code6”
SDH3/4-6-PBSDH3/4-6-CPSDH3/4-6-BNSDH3/4-6-PSSDH3/4-6-BSSDH3/4-6-ORB
Finish
Polished BrassBright ChromeBrushed Nickel
Polished StainlessBrushed Stainless
Oil Rubbed Bronze
Specifications: SDP3/4, SDH3/4Material: Solid Brass or Stainless Steel tubing Center to Center: 6” (other sizes upon request)Diameter: 3/4” (19mm)Glass Thickness Range: 1/4” (6mm) to 1/2”(12mm) Finishes: Polished Brass, Bright Chrome, Brushed Nickel, Polished Stainless & Brushed StainlessChoice of no washer or with metal washerRequires 1/2” maximum holes for installation
Specifications: SDTB3/4Material: Solid Brass or Stainless Steel tubing Center to Center: 6” Pull with 18” or 24” Towel Bar (other sizes upon request)Diameter: 3/4” (19mm)Glass Thickness Range: 1/4” (6mm) to 1/2”(12mm) Finishes: Polished Brass, Bright Chrome, Brushed Nickel, Polished Stainless & Brushed StainlessChoice of no washer or with metal washer
Back to Back Pulls consist of Handles on both sides
The Shower Door Towel Bar consists of one towel bar and one single side pull.Available in solid brass and stainless steel tubing.
Product Code6”x18”
SDTB3/4-6x18-PBSDTB3/4-6x18-CPSDTB3/4-6x18-BNSDTB3/4-6x18-PSSDTB3/4-6x18-BSSDTB3/4-6x18-ORB
Product Code6”x24”
SDTB3/4-6x24-PBSDTB3/4-6x24-CPSDTB3/4-6x24-BNSDTB3/4-6x24-PSSDTB3/4-6x24-BSSDTB3/4-6x24-ORB
Finish
Polished BrassBright ChromeBrushed Nickel
Polished StainlessBrushed Stainless
Oil Rubbed Bronze
7
Specifications: SDP3/4Material: Solid Brass or Stainless Steel tubing Center to Center: 18” or 24” Towel Bar (other sizes upon request)Diameter: 3/4” (19mm)Glass Thickness Range: 1/4” (6mm) to 1/2”(12mm) Finishes: Polished Brass, Bright Chrome, Brushed Nickel, Polished Stainless & Brushed StainlessChoice of no washer or with metal washer
The Shower Door Towel Bar consists of one towel bar.Available in solid brass and stainless steel tubing.
Product Code18”
SDP3/4-18-PSSDP3/4-18-BS
Product Code24”
SDP3/4-24-PSSDP3/4-24-BS
Finish
Polished StainlessBrushed Stainless
Shower Door Pull Handles
Product Code
ALMH-BDAALMH-GO
Finish
AnodizedGold
Used for Wall to Glass installations.For glass that is 1/4” thick.
Mini Shower HingeWall to Glass
Special Order
Special Order
Product Code
SCALMH-BDASCALMH-GO
Finish
AnodizedGold
Self Closing Shower hinge for glassthat is 1/4” thick.
Self Closing Shower HingeWall to Glass
Product Code
SHBM037-CP
Finish
Bright ChromeJunior Silhouette Shower hinge forglass that is 1/4” - 5/16” thick.
Junior Silhouette Shower HingeWall to Glass
Specifications: Clear Polycarbonates, Vinyl Seals and Edge Wipes Available in 1/4” (6mm) and 3/8” (10mm) Glass Sizes78”, 84” and 98” length available
Product Code
EW06DD-78EW10DD-98EW10DD-78
Glass Size
1/4” (6mm)3/8” (10mm)3/8” (10mm)
Lenght
78”98”78”
This Seal and Wipe has two uses:Installed on the door bottom thesoft acts as a wipe; If installed onthe overlapping bi-fold door thesoft lip acts as a seal.
Dual Seal and Wipe
GLASS DOOR
WALL CURB
GLASSDOOR
GLASS DOOR
OPEN
FIXED PANEL
GLASS DOOROPEN
FIXED PANEL
CURB
GLASSDOOR
8
Shower Door Polycarbonates
Product Code
EW06WS-84EW10WS-98EW10WS-84
Glass Size
1/4” Extended Wing
3/8” Extended Wing
3/8” Extended Wing
Lenght
84”98”84”
The Clear Bottom Wipe with DripRail is installed on the bottom ofdoor. Soft wipes on the bottomprovide a tight seal 45o
Clear Bottom Wipe with Drip Rail
Product Code
EW06YJ-84EW10YJ-84
Glass Size
1/4” (6mm)3/8” (10mm)
Lenght
84”84”
This is for use on 180o in-lineglass applications. It is installedonto the fixed panel with the lipon the strike side.
‘Y’ Inline Panel Seal
Product Code
EW10HJ-98EW10HJ-84EW10HJ-78
Glass Size
3/8” (10mm)3/8” (10mm)3/8” (10mm)
Lenght
98”84”78”
The “H” jamb is for use on 180o
inline glass applications. Installedonto the fixed glass panel withthe lip positioned on the strikeside, or onto the door with thelip positioned on the hinge side.
“H” Jamb Seal
9
Finishes
Polished Brass Brushed Chrome
Brushed Nickel Polished Chrome
Rockwell Security door hardware offers different finishes to help coordinate your home.
All popular architectural or decorative finishes help enhance the beauty of your home
inside and out.
Rockwell Security is a vertically integrated manufacturer of commercial and residential
door hardware with ISO 9000 certified manufacturing facilities. We are located in
California.
Our goal is to provide our customers with quality products at an exceptional value. Our
vast product line includes a full selection of commercial and residential door hardware,
comparable in quality and design to the established brands. Most items are stocked.
Product Finishes
Oil Rubbed Bronze
ROCKWELL SECURITY INC.U.S.A.
Tel: (704) 597 4190 Fax: (704) 597 6189www.rockwellsecurityinc.com