Rugged compact design
The unique design of the JS1000 joystick baseincorporates contactless Hall effect sensors into asimple, compact and rugged mechanical constructionfor the most demanding applications. It is ideallysuited for low clearance and armrest mounting, andyet withstands the most punishing environments.
Environmental sealing
The JS1000 joystick base is designed and tested foruse in harsh out of cab environments. It meets IP 67environmental protection below the panel mount ifthe vent plug is installed. The vent plug is a baseoption. If it is not ordered, the base is not protectedfrom below-panel particulate and moisture ingress.Environmental protection above the panel mount isIP 67 with the exception of the Pro grip option. ThePro grip is for in machine cab use only.
Features
• Non-contacting hall effect sensing‒ Available redundant sensing per axis
for CAN output configurations• Single or dual axis• X – Y axis guided• Spring return to center• Choice of two centering spring forces• Operating life > 10 million cycles per
axis• Two output options:‒ 0.5 to 4.5 VDC
‒ CAN 2.0 B, J1939 protocol‒ CAN 2.0 B, CANopen protocol
• IP 67 environmental sealing abovepanel (grip dependent)
• IP 67 environmental sealing belowpanel with vent plug installed (basedependent)
• Integrated 6 pin DEUTSCH DTMconnector
• Multiple grip options:‒ Ball grip‒ Grip with analog rocker switch‒ Grip with analog banana switch‒ PRO style ergonomic grip, which
offers a wide variety of configurablepush-button switches andproportional roller switch functions.(Pro grip is not recommended in anopen cab environment)
‒ Custom designed grips to meetspecific user requirements
Comprehensive technical literature onlineat powersolutions.danfoss.com
Data Sheet
JoystickJS1000 Joystick Base
© Danfoss | May 2017 520L0724 | AI00000034en-US1101 | 1
Dimensions in millimeters [inches] and connectors
PRO Grip
4 x Ø4.57±0.05[0.180 ±0.002]
Ø59.4 ±0.5[2.34 ±0.02]
74.2 ±0.5 DIA [2.92 ±0.02]
9.4
±0.5
[0
.37
±0.0
2]53
.46
±0.5
[2
.1 ±
0.02
]
6.35
±0.
5 [0
.25
±0.0
2]
Pin 6
Pin 1
166.
0 ±1
[6.5
5 ±0
.04]
18o REF 18o REF
18o REF 18o REF
28.58 ±0.12[1.125 ±0.005]
28.5
8 ±0
.12
[1.1
25 ±
0.00
5]
34.92 ±0.5[1.38 ±0.02]
34.9
2 ±0
.5[1
.38
±0.0
2]
69.85 ±0.5[2.75 ±0.02]
69.8
5 ±0
.5[2
.75
±0.0
2]
57.15 ±0.12[2.25 ±0.005]
R2.0 ±0.5[0.08 ±0.02]
57.1
5 ±0
.12
[2.2
5 ±0
.005
]
P005 244EDecreasing
X
DecreasingX
IncreasingX
IncreasingX Increasing
Y
IncreasingY
DecreasingY
DecreasingY
Motion Multiaxis (X and Y) Single Axis (Y only)
Ball Grip
18o REF
3.8 [0.15] Max panel Feed-Thru MTG
18o REF
69.8
5 ±0
. 5[2
.75
±0.0
2 ]
69.85 ±0.5[2.75 ±0.02]
DecreasingX
DecreasingX
IncreasingX
IncreasingX
IncreasingY
IncreasingY
DecreasingY
DecreasingY
18o REF 18o REF
P005 243E
4 x Ø4.57±0.05[0.180 ±0.002]
Ø59.4 ±0.05[2.34 ±0.002]
59.6
±0.
5[2
.35
±0.0
2]
6.35
±0.
5[0
.25
±0.0
2]
86.6
1 ±0
.5[3
.41
±0.0
2]
R2.03 ±0.5[0.08 ±0.02]
Pin 6
Pin 1
Mating connector DEUTSCH DTM06-6S
Pin assignments
Pin CAN Analog
Pin 1 Ground Ground
Pin 2 Power Power
Pin 3 CAN high X output signal
Pin 4 CAN low Y output signal
Pin 5 CAN shield Rocker switch
Pin 6 No connection No connection
Electrical characteristics
Sensor type Hall effect
Resolution Infinite
Supply voltage (Vs) Analog output: 5 ± 0.5 VdcCAN: 9 to 32 Vdc
Output Analog: 0.5 to 4.5 Vdc nominalCAN: 2.0 B, J1939 protocol
Current consumption 25 mAPRO grip = 150 mA
Mechanical characteristics
Lever mechanical angle ±18° on axis
Operating life > 10 million cycles
Vibration 7.67 Gs RMS
Shock 50 Gs
Weight (base without grip) 0.38 kg [0.838 lb]
Environmental parameters
Operating temperature -40° C to +80° C [-40° F to +175° F]
Storage temperature -55° C to +85° C [-67° F to +180° F]
Protection Above panel ball grip: IP 67(PRO grip IP 43 and IP 40 withproportional roller function)
Below panel: IP 67 with vent pluginstalled
EMI/RFI rating 100 V/m
Mating connector assemblies
Type Danfoss part number
6 pin DEUTSCH connectorbag assembly
10101551
6 pin connector with 400 mm[15.75 in] leads
10101557
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to productsalready on order provided that such alterations can be made without changes being necessary in specifications already agreed.All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | © Danfoss | May 2017 520L0724 | AI00000034en-US1101
Top Related