JS1000 Joystick Base Data Sheet - Danfoss...Weight (base without grip) 0.38 kg [0.838 lb]...

2
Rugged compact design The unique design of the JS1000 joystick base incorporates contactless Hall effect sensors into a simple, compact and rugged mechanical construction for the most demanding applications. It is ideally suited for low clearance and armrest mounting, and yet withstands the most punishing environments. Environmental sealing The JS1000 joystick base is designed and tested for use in harsh out of cab environments. It meets IP 67 environmental protection below the panel mount if the vent plug is installed. The vent plug is a base option. If it is not ordered, the base is not protected from below-panel particulate and moisture ingress. Environmental protection above the panel mount is IP 67 with the exception of the Pro grip option. The Pro grip is for in machine cab use only. Features Non-contacting hall effect sensing Available redundant sensing per axis for CAN output configurations Single or dual axis X – Y axis guided Spring return to center Choice of two centering spring forces Operating life > 10 million cycles per axis Two output options: 0.5 to 4.5 V DC CAN 2.0 B, J1939 protocol CAN 2.0 B, CANopen protocol IP 67 environmental sealing above panel (grip dependent) IP 67 environmental sealing below panel with vent plug installed (base dependent) Integrated 6 pin DEUTSCH DTM connector Multiple grip options: Ball grip Grip with analog rocker switch Grip with analog banana switch PRO style ergonomic grip, which offers a wide variety of configurable push-button switches and proportional roller switch functions. (Pro grip is not recommended in an open cab environment) Custom designed grips to meet specific user requirements Comprehensive technical literature online at powersolutions.danfoss.com Data Sheet Joystick JS1000 Joystick Base © Danfoss | May 2017 520L0724 | AI00000034en-US1101 | 1

Transcript of JS1000 Joystick Base Data Sheet - Danfoss...Weight (base without grip) 0.38 kg [0.838 lb]...

Page 1: JS1000 Joystick Base Data Sheet - Danfoss...Weight (base without grip) 0.38 kg [0.838 lb] Environmental parameters Operating temperature-40 C to +80 C [-40 F to +175 F] Storage temperature-55

Rugged compact design

The unique design of the JS1000 joystick baseincorporates contactless Hall effect sensors into asimple, compact and rugged mechanical constructionfor the most demanding applications. It is ideallysuited for low clearance and armrest mounting, andyet withstands the most punishing environments.

Environmental sealing

The JS1000 joystick base is designed and tested foruse in harsh out of cab environments. It meets IP 67environmental protection below the panel mount ifthe vent plug is installed. The vent plug is a baseoption. If it is not ordered, the base is not protectedfrom below-panel particulate and moisture ingress.Environmental protection above the panel mount isIP 67 with the exception of the Pro grip option. ThePro grip is for in machine cab use only.

Features

• Non-contacting hall effect sensing‒ Available redundant sensing per axis

for CAN output configurations• Single or dual axis• X – Y axis guided• Spring return to center• Choice of two centering spring forces• Operating life > 10 million cycles per

axis• Two output options:‒ 0.5 to 4.5 VDC

‒ CAN 2.0 B, J1939 protocol‒ CAN 2.0 B, CANopen protocol

• IP 67 environmental sealing abovepanel (grip dependent)

• IP 67 environmental sealing belowpanel with vent plug installed (basedependent)

• Integrated 6 pin DEUTSCH DTMconnector

• Multiple grip options:‒ Ball grip‒ Grip with analog rocker switch‒ Grip with analog banana switch‒ PRO style ergonomic grip, which

offers a wide variety of configurablepush-button switches andproportional roller switch functions.(Pro grip is not recommended in anopen cab environment)

‒ Custom designed grips to meetspecific user requirements

Comprehensive technical literature onlineat powersolutions.danfoss.com

Data Sheet

JoystickJS1000 Joystick Base

© Danfoss | May 2017 520L0724 | AI00000034en-US1101 | 1

Page 2: JS1000 Joystick Base Data Sheet - Danfoss...Weight (base without grip) 0.38 kg [0.838 lb] Environmental parameters Operating temperature-40 C to +80 C [-40 F to +175 F] Storage temperature-55

Dimensions in millimeters [inches] and connectors

PRO Grip

4 x Ø4.57±0.05[0.180 ±0.002]

Ø59.4 ±0.5[2.34 ±0.02]

74.2 ±0.5 DIA [2.92 ±0.02]

9.4

±0.5

[0

.37

±0.0

2]53

.46

±0.5

[2

.1 ±

0.02

]

6.35

±0.

5 [0

.25

±0.0

2]

Pin 6

Pin 1

166.

0 ±1

[6.5

5 ±0

.04]

18o REF 18o REF

18o REF 18o REF

28.58 ±0.12[1.125 ±0.005]

28.5

8 ±0

.12

[1.1

25 ±

0.00

5]

34.92 ±0.5[1.38 ±0.02]

34.9

2 ±0

.5[1

.38

±0.0

2]

69.85 ±0.5[2.75 ±0.02]

69.8

5 ±0

.5[2

.75

±0.0

2]

57.15 ±0.12[2.25 ±0.005]

R2.0 ±0.5[0.08 ±0.02]

57.1

5 ±0

.12

[2.2

5 ±0

.005

]

P005 244EDecreasing

X

DecreasingX

IncreasingX

IncreasingX Increasing

Y

IncreasingY

DecreasingY

DecreasingY

Motion Multiaxis (X and Y) Single Axis (Y only)

Ball Grip

18o REF

3.8 [0.15] Max panel Feed-Thru MTG

18o REF

69.8

5 ±0

. 5[2

.75

±0.0

2 ]

69.85 ±0.5[2.75 ±0.02]

DecreasingX

DecreasingX

IncreasingX

IncreasingX

IncreasingY

IncreasingY

DecreasingY

DecreasingY

18o REF 18o REF

P005 243E

4 x Ø4.57±0.05[0.180 ±0.002]

Ø59.4 ±0.05[2.34 ±0.002]

59.6

±0.

5[2

.35

±0.0

2]

6.35

±0.

5[0

.25

±0.0

2]

86.6

1 ±0

.5[3

.41

±0.0

2]

R2.03 ±0.5[0.08 ±0.02]

Pin 6

Pin 1

Mating connector DEUTSCH DTM06-6S

Pin assignments

Pin CAN Analog

Pin 1 Ground Ground

Pin 2 Power Power

Pin 3 CAN high X output signal

Pin 4 CAN low Y output signal

Pin 5 CAN shield Rocker switch

Pin 6 No connection No connection

Electrical characteristics

Sensor type Hall effect

Resolution Infinite

Supply voltage (Vs) Analog output: 5 ± 0.5 VdcCAN: 9 to 32 Vdc

Output Analog: 0.5 to 4.5 Vdc nominalCAN: 2.0 B, J1939 protocol

Current consumption 25 mAPRO grip = 150 mA

Mechanical characteristics

Lever mechanical angle ±18° on axis

Operating life > 10 million cycles

Vibration 7.67 Gs RMS

Shock 50 Gs

Weight (base without grip) 0.38 kg [0.838 lb]

Environmental parameters

Operating temperature -40° C to +80° C [-40° F to +175° F]

Storage temperature -55° C to +85° C [-67° F to +180° F]

Protection Above panel ball grip: IP 67(PRO grip IP 43 and IP 40 withproportional roller function)

Below panel: IP 67 with vent pluginstalled

EMI/RFI rating 100 V/m

Mating connector assemblies

Type Danfoss part number

6 pin DEUTSCH connectorbag assembly

10101551

6 pin connector with 400 mm[15.75 in] leads

10101557

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to productsalready on order provided that such alterations can be made without changes being necessary in specifications already agreed.All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 | © Danfoss | May 2017 520L0724 | AI00000034en-US1101