Page . . . . . . . . . . . . . . . . . . . . . . .582
HOT DIP
Page . . . . . . . . . . . . . . . . . . . . . . .582
GROUP
716SEALANTS
AND ADHESIVES
Page . . . . . . . . . . . . . . . . . . . . . . .583
GROUP
721PAINTS GROUP
727
Page . . . . . . . . . . . . . . . . . . . . . . .584
GROUP
727SOLVENT
DEGREASERSGROUP
732CLEANER SPRAYS GROUP
732
Pages . . . . . . . . . . . . . . . . . . . . . .590
GROUP
734MARKERS - PAINT
Page . . . . . . . . . . . . . . . . . . . . . . .591
GROUP
740GREASES
Page . . . . . . . .592 - 593
SECONDARYCONTAINMENT
STORAGE
Page . . . . . . . .594 - 597
GROUP
742SPILL RESPONSE
Pages . . . . . . . . . . . . . . . . . . . . . .598
GROUP
780HAND & SKIN CARE
GROUP
780CLEANINGPRODUCTS
Page . . . . . . . . . . . . . . . . . . . . . . .584
CLEANINGBATHS
Page . . . . . . . . . . . . . . . . . . . . . . .585
MAINTENANCESPRAYS &
LUBRICANTS
Page . . . . . . . .586 - 589
Pages . . . . . . .599 - 601
GROUP
741
GROUP
708
Page581
Section 7 Contents
7Description Group PageCleaning Products 780 599 - 601Cleaner Sprays 732 585Cleaning Baths 727 584Greases 740 591Hand & Skin Care 780 598Hot Dip Coatings 708 582Maintenance Sprays & Lubricants 732 586 - 589Markers - Paint 734 590Paints 721 583Sealants & Adhesives 716 582Secondary Containment Storage 741 592 - 593Solvent Degreasers 727 584Spill Response 742 594 - 597
Lubricants& ChemicalProductsSection 7Product Groups 708 - 780
AD160Amber colour.
RD160Red colour.
Protective Coating Red-Hot-Dip
Hot dip strippable plastic coating moulds itself around thecomponent or tool being coated to provide 100% coverage andprotects against corrosion and impacts, for up to ten years. Thecomponent protected can be easily identified through thetranslucent coating. Simply removed by peeling it off, leavesbehind a thin oil film to provide short term protection againstcorrosion. The removed protective dip can be reused. Neverdirectly apply heat to melt the protective dip, always use with asuitable melting pot. Working temperature 130°C to 160°C (foroptimum results 140°C to 145°C).
Capacity Internal Dimensions Maximum Order CodeLitres Pints Diameter Depth Wattage KEN-7090.7 1.20 100 (mm) 90 (mm) 275 -1010K2.5 4.40 150 (mm) 140 (mm) 600 -1030K6.0 10.5 200 (mm) 190 (mm) 1125 -1060K
Description Weight Order Code(Bars) each KEN-708
RD160 Single Bar 0.50g -0050KRD160 Case (50) 25.00g -0250KAD160 Single Bar 0.50g -0500KAD160 Case (50) 25.00g -0550K
Lubri
cants
& C
hem
ical Pro
duct
sHOT DIP COATINGS, SEALANTS & ADHESIVES
GROUP
708/716Industrial Melting PotsA range of melting pots which have been designed for industrial melting of waxes, glues and plastics etc. for coating, casting, protecting etc. The pots are electrically heated and thermostatically temperaturecontrolled from 50°C to 200°C. Constructed from anodisedaluminium with ceramic fibre insulation. Pots supplied with 2mcable and fused plug, lifting handle, double-wall heat-conservinglid, on/off switch and safety thermal cut-out. 220/240V as standard.
Page582 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2009
Sealant Cartridge Applicator GunsEconomy Plastic GunEasy to use.
Accepts 310ml cartridges.
Heavy Duty Metal GunsExtremely robust and ideal for continuoususe. Will not twist under pressure,ergonomically designed to reduce operatorfatigue. Very smooth action for optimumapplication of sealant.
Heavy Duty Metal -380ml
Heavy Duty Metal -310ml
Type Cartridge Order Code(max size) KEN-715
Plastic 310ml -1200K
Type Cartridge Weight Order Code(max size) each KEN-715
Std. 310ml 435g -1000K
Type Cartridge Order Code(max size) KEN-715
Heavy 310ml -1400KDuty 380ml -2000K
Standard Metal GunRobust and easy to use.
Accepts 310ml cartridges.
Silicone
General Purpose SiliconeHigh performance acetoxy silicone provides a permanently watertightflexible seal and offers excellent adhesiveproperties, making it suitable for use onglass, sanitary-ware, ceramics and non-porous surfaces. For indoor and outdooruse. Weather-proof. Mould-resistant. Life expectancy up to 25 years. Conforms to BS 5889.Size: 310ml cartridge.
Colour Order CodeSHK-716
White -3100KClear -3110K
Lt Brown -3120KBlack -3130KGrey -3140K
Instant NailsA high strength gap filling solvent-free adhesive thatproduces a quick ‘grab’ andreplaces mechanical fixings in amultitude of home improvementapplications. Dries white and is over-paintablewhen dry.
Size Order CodeSHK-725
310ml -6500K
* Other sizes available upon request. *
Description Order CodeKEN-983
Gas -8000KWater -9000K
P.T.F.E. Tape Gas Type: 12mm x 5m roll.For gas and hotwater pipes (notfor potablewater). Made to BS EN 751:3Water Type: 12mm x 12m roll. For hot and cold water pipes. Made to BS 6920 & BS 7786
PAINTSGROUP
721 Lu
brica
nts &
Chem
ical P
roducts
Page583PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2009
FloorPaint
Attractive and hard wearing, transforms drab, stainedor scuffed concrete and similar surfaces. Suitable forfloors in warehouses, workshops, shop floorsgarages, basements, etc.Storage and UseStore at temperatures above 12°C. Apply in warm(above 15°C) well ventilated conditions. Easy to use,oil resistant and easy to clean. No primer required.Ideal for garages, workshops and laundry rooms.Coverage: up to 8m2 per litre (two coats recommended). *Please note, colours are for guidance only.5 Litre tin.
Anti-Slip Floor PaintTuffgripSolvent free industrial quality floor paint. Applied by roller as a one-coat system, to providetraction in areas of slip hazard. Hard wearing,epoxy resin anti-slip coating suitable for use onheavy trafficked concrete, stone, steel andwooden floor surfaces. Coverage:5m2 per pack.
*Please note, colours are for guidance only.5 Litre tin.
Colour Order CodeSOL-721
Mid Grey -2050ETile Red -2100K
Mid Green -2030CDark Grey -2040DMid Blue -2060F
Galvanising Spray -Cold ZincSZ1-500BFast drying corrosionprotection. Matchescolour of newlygalvanised metal.Ideal for protectingwelding joints ingalvanised structures.Can be used as a topcoat or primer.Compatible with mostpaint finishes.Contains no CFCs orlead. Fitted withdirectional spraybutton designed toassist application inoutdoor locations withminimum over-spray.Size: 500ml aerosol.
Product Order CodeNumber
SizeSOL-732
SZ1-500B 500ml -0900K
500ml
Cold Galvanising Spray CGA500Fast drying corrosionprotection. Matchescolour of newlygalvanised metal.Ideal for protectingwelding joints ingalvanisedstructures. Can beused as a top coat orprimer. Compatiblewith most paintfinishes. Contains noCFCs or lead. Fittedwith directional spraybutton designed toassist application inoutdoor locationswith minimum over-spray.Size: 500ml aerosol.
Product Order CodeNumber
SizeSSF-732
CGA500 500ml -3900K
500ml
Colour Order CodeSOL-721
Mid Grey -3050ESafety Yellow -3080H
Tile Red -3100K
Lubri
cants
& C
hem
ical Pro
duct
sCLEANING BATHS/SOLVENT DEGREASERS
GROUP
727
Page584 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2009
Aqueous OrangeCitrus Based Aqueous CleanerAqueous Orange is a highlyconcentrated citrus based blend of solvents and powerful surfactants will safely
remove oils, greases etc from manyhard surfaces. Designed to replace
hazardous solvents such aswhite spirit and paraffin. It can
be diluted with water formaximum economy and its
micro-emulsion formulaoffers the benefits of bothwater based economy with
solvent based efficiency.Contains biodegradable
surfactants which enable itto break down naturally
after disposal. Non-toxic,contains no CFCs. Negligible
VOC. Non-flammable. Non-hazardous for easy waste
disposal. Can be used as a safer,environmentally friendly alternative.
Size Order CodeSOL-727
1ltr -2800A5ltr -2810B
20ltr -2820C
Size Order CodeSOL-727
5ltr -2910B20ltr -2920C
Size Order CodeSOL-727
5ltr -2610B20ltr -2620C
Orange PlusCitrus Based Water Rinseable DegreaserOrange Plus is a safe but powerful, citrus-based solvent degreaser. For the cleaning and degreasing ofengineering components andequipment. Safely removesheavy oils, greases,bitumen, wet paints,adhesives and sealantsfrom all metals,including plant andmachinery, and someplastics. Non-toxic, contains noCFCs. Reduced VOC.Non-flammable. Non-hazardous forwaste disposal. Can beused as a safer,environmentally friendlyalternative to hazardoussolvents such as Xylene,Toluene, Acetone etc.
NNAATTUURRAALLFFOORRMMUULLAA
IINNDDUUSSTTRRIIAALLSSTTRREENNGGTTHH
Just OrangeCitrus Based Solvent DegreaserJust Orange is a safe but powerful, citrus-basedsolvent degreaser. For the cleaning anddegreasing of engineering components andequipment. Safely removes heavy oils, greases,bitumen, wet paints, adhesives and sealantsfrom virtually all hard surfaces. Non-toxic,contains no CFCs. Reduced VOC. Inflammable.Non-hazardous for waste disposal. Can be usedas a safer, environmentally friendly alternativeto hazardous solvents such as acetone,benzene, butyl cellusolve, CFCs, freon, glycol ethers, HCFCs, isopropyl alcohol, methyl ethyl, ketone, mineral spirits, toluene, trichloroethylene, xylene etc.
Tray Voltage Order CodeMaterial SOL-727
Mild Steel 110V Parts Washer -5110AMild Steel 240V Parts Washer -5240A
Degreasing Station/Parts Washer
Air operated, strong and durable mild steel degreasing station. Ideal for use as a soaking bath and air agitation facility aids thedegreasing process by removing heaviest oil and grime from smallparts. Also comes with a flow through brush to deal with caked ongrime. Designed to sit on 100L barrel.Dimensions: Length: 760mm (30”). Width: 510mm (20”). Height: 200mm (8”). Weight: 20.8kg.Working height:When on 100L drum = 890mm (35”).Solvent delivery: Flow through brush.General: Powder coated bowl and galvanised splashback sheet. Tray is mild steel.
CLEANER SPRAYSGROUP
732 Lu
brica
nts &
Chem
ical P
roducts
Page585PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2009
Cleaner Spray
SC1-500B Industrial Rapid Dry Solent Rapid DrySolvent Cleaner issupplied in a large500ml aerosol. Theproduct is formulatedto quickly penetrategrease, oil and generalsoiling frommetal/electricalcomponents andprecision parts. Theformulation rapidlyevaporates leaving aclean, dry surface.Very effective attemperatures rangingfrom -5°C to 30°C.Safe on most plasticcomponents. Willsoften some lacquers.If in doubt aboutsuitability test on ascrap component or asmall area beforegeneral application.Size: 500ml.
Product Size Order CodeNumber SOL-732
SC1-500B 500ml -0100K
Cleaner SpraySC2-500C Electrical Contact Cleaner Spray - Trike-freeAn effective solventbased cleaner. Theproduct is formulatedto remove oil, greaseand carbon dust fromelectrical switch gearand electroniccomponents. It is safeon most commonplastic parts, but willattack lacquer finishesand coatings. If indoubt about suitability,trial the product on ascrap sample firstbefore generalapplication. Theproduct is propelledfrom the aerosol byCO2 carbon dioxidegas (non-flammable).Electrical SwitchCleaner fluid isflammable. Alwaysensure power isswitched off beforeapplying this productto electricalequipment.
Product Size Order CodeNumber SOL-732
SC2-500C 500ml -0120K
Trike-free Contact CleanerCCA500C Electrical ContactCleaner Spray -Trike-freeSuitable for cleaningand degreasingdelicate componentssuch as those used inelectrical equipment.It can be used onmost surfaces andwill not effect PCBs,delicate plastics orpainted surfaces.Non-corrosive. Itcontains only solventswhich are permittedunder the MontrealProtocol.
Product Size Order CodeNumber SSF-732
CCA500C 500ml -3120K
Foaming SpraySC5-500BCuts through grease,dirt, oil and generalsoiling, contains nosilicones. Ideal for non-poroussurfaces. 1000+1uses in the home,industry, garage orfactory. Size: 500ml aerosol.
Container Size Order CodeNumber SOL-732
SC5-500B 500ml -0180K
Container Size Order CodeType SSF-732
Aerosol 500ml -3180K
Anti-Static Foam CleanerFCA500This cleaner is recommended for theeveryday cleaning of electronic and electricalequipment. It removes stubbornstains, nicotine,grease and generalgrime build-up fromplastic, formica,leatherette, ceramics,glass, paintwork orany other non-poroushard surface. Ideal for use inoffices, canteens,banks, schools,kitchens, washroomsand many otherproblem areas. It has beenformulated fromsurfactants andsolvents which aresafe to use on mostsurfaces. Size: 500ml aerosol.
Product Aerosol Order CodeNumber Size SOL-732
SM3-500C 500ml -0440K
Multi-Purpose Oil Spray CO2SM3-500CExcellent general-purpose lubricant. Clean, clear fluid suitable for domestic andindustrial use. No reclaimed oil content.Formulated with strong anti-rust additives. No CFCs. No Silicone. No added extending solvent. Density: 0.862. Pour Point: -9°C.Flash point base oil: 214°C.Kinematic visc at 40°C: 20.9.Analine point: 101°C.
Lubri
cants
& C
hem
ical Pro
duct
sMAINTENANCE SPRAYS & LUBRICANTS
GROUP
732Multi-Purpose Oil SprayGeneral-purposeoil spray withanti-rustadditives forexcellent all-roundperformance.Ideal forlubricating locks,hinges, bicyclechains andpedals, lawnmowers, windowslides, caraerials andsewingmachines. Cleanformulationsuitable fordomestic useand industrialuse. CFC-free.
Air Lube Oil
Excellent air release quality, low foamingability and resists clogging. Contains anti-rust and anti-wear additives. Extremely resistant to water absorption andcan be mixed with all mineral oil basedlubricants without draining the system. Can be used on air tools. ISO Grade VG22.
Container Size Order CodeType KEN-732
Poly Bottle 500ml -8000K
Container Size Order CodeType KEN-732
Aerosol 200ml -7820KAerosol 415ml -7840K
Page586 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2009
Container Size Order CodeType SSF-732
Aerosol 500ml -3400K
PenetratingSpray
POA500Penetrating oil fordismantling,lubricating andcleaning. This oildisplaces waterleaving a hydrophobiccoating to protectsurfaces fromcorrosion. Itpenetrates threadsand crevices torelease and lubricatedelicate mechanisms,pivot points andsliding surfaces whilstdegreasing hardsurfaces.Size: 500ml aerosol.
Maintenance Liquid
AC-90Displaces water, startswet engines,penetrates rust,protects fromcorrosion, lubricatesand stops squeaks.Silicone free,electrically non-conductive and can beused on or nearelectrical components,motor circuits etc,without affectinginsulation or causingshort circuits. Suppliedin aerosols that use noCFCs and are ozonefriendly or in screw topmetal cans and drums.Does Not ContainKerosene*, Paraffin*or Naphtha*. (*These products areused by some othermaintenance sprays orwater displacing spraysbut are associated with skin drying andirritations.)
Product Size Order CodeNumber KEN-732Aerosol 250ml -0050KAerosol 500ml -0180K
Can 5ltr -0200KDrum 25ltr -0250K
Applicator -0500K
De-ionisedWater DW25
For use in lead-acid car batteries. Also suitable for domestic appliances such as steam irons and steam cleaners. Avoids problems caused by scaling.Can be used as a final rinse in car washing to avoid ‘spotting'. Also suitable for rinsingscientific glassware.
Product Size Order CodeKEN-732
De-icer 300ml -2500K
Super De-IcerMelts ice fast. Operates at –15°C. CFC-free.
Size Order CodeSOL-732
25ltr -4250K
For Zinc Galvanising
SpraySee
Group
721
Page587PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2009
MAINTENANCE SPRAYS & LUBRICANTSGROUP
732Lu
brica
nts &
Chem
ical P
roducts
Anti-Rust Protection SpraySP1-500B - GreenSolent GreenMoisture Guard is asoft thin filmmoisture/corrosionprotective coating.Packed in a large500ml aerosol. Thecoating has a slightgreen colouring whichclearly indicatestreated areas. Idealfor longer termmoisture/ corrosionprotection ofmachinedcomponents/moulding dies andtools. Removed easilywith Solent IndustrialCleaner, part numberSC1-500B.Size: 500ml aerosol.
Penetrating Spray
SM1-500BRapidly penetratesinto rust andcorroded fittings.Allows easy releaseand dismantling offittings exposed toheat and greatpressure. Can beused on wet metalcomponents, doesnot contain Silicone,CFCs or Chlorine.Lubricates threadsduring releaseprocedure, 30% lessdense than water.Size: 500ml aerosol.
Product Order CodeNumber
SizeSOL-732
SP1-500B 500ml -0600K
Product Order CodeNumber
SizeSOL-732
SM1-500B 500ml -0400K
Product Order CodeNumber
SizeSOL-732
SP2-500B 500ml -0620K
Heavy Duty Anti-Rust Protection SpraySP2-500BSolent Heavy Duty Anti-Rust Protection Spray issupplied in a large 500mlaerosol. It is a highperformance corrosioninhibitor. The product issprayed directly ontothe surface to beprotected. Clear incolour with a faint yellowtrace to identify treatedsurfaces. The film hasself-healing propertiesand is easily removedwith solvent cleaners.The coating will resistmoisture, acid andalkali fumes. The filmdoes not containsilicone or halogens.Corrosion protectionperiods vary withenvironmentalconditions. Typicalinterior protection in theUK in excess of twoyears. Product can bere-applied shouldconditions require it.
Maintenance SpraySM4-500 ‘M4 Plus’Lubricates: Highperformance mineral oilbased lubricant withPTFE. Displaces Water:Helps start dampengines. Penetrates:Allows release of rustyfixings. Cleans &Protects: Cleans metalsurfaces and preventsrusting of treated parts.Does not containnaphtha, kerosene orparaffin which are allassociated withoperator skin dryness,cracking or dermatitis.CO2 non-flammablepropellant. Does notcontain silicone.Electrically non-conductive at normalranges found in thehome. Care must betaken if used on someelectrical plasticcomponents where‘crazing’ may occur.
Product Order CodeNumber
SizeSOL-732
SM4-500C 500ml -0460K
Copper Grease Spray SM7 500B - With GraphiteComponents subjectedto great heat andpressure during theiroperating life can easilybe dismantled if CopperSpray Grease is appliedduring assembly.Grease melts at hightemperatures anddisappears, but copperstays put. e.g. tolubricate the threads onexhaust assemblies etc.Copper grease spray isparticularly effective oncommercial andpassenger vehiclebraking systems. Extraheavy duty coppergrease with graphite.High copper content -effective up to 1100°C.No lead content, noCFCs, no Silicone, noChlorinated content. Fitted with directionalspray button forprecision application.Also ideal for boilerfittings that are subjected to hightemperatures.
Product Order CodeNumber Size SOL-732
SM7-500B 500ml -0520K
Container Size Order CodeType SSF-732
Aerosol 500ml -3340K
Leak Detector Spray
LDA500For checking for themost minute leaks inany gas or airpressurised systemsincluding commercialvehicle air brakesand pressurevessels. Contains no alcoholsor solvents, is notcaustic and containsa rust inhibitor. Spray directly ontothe suspect areausing the extensiontube and examine forbubbling which willindicate leakage.Size: 500ml aerosol.
Page588 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2009
Lubri
cants
& C
hem
ical Pro
duct
sMAINTENANCE SPRAYS & LUBRICANTS
GROUP
732
Welders Anti-Spatter SpraySW1-400CSolvent based coatingthat is applied tometal before welding.During welding smallblobs of molten metalfall either side of theweld. These blobs arecalled spatter, thiscoating is appliedbefore welding andprevents the spatterfrom sticking to themetal. CO2 gaspropelled aerosol.Totally non-flammable. Siliconefree and easilyremoved with solventsprior to galvanising orpainting.
Flaw Inspection System
Fast reliable method for visually inspectingand spot-checking surfaces of welds, exoticalloys or standard metals, highly stressedstructural members, critical castings,shafts, gears, spindles, and any other hardpart where identification of surface flaws isessential. Detects flaws such as cracks,pin holes, welding laps and porousnesseither during manufacture or on-site. A three part system. SFD-501C is acleaner. SFD-502C is a dye penetrant. SFD-503C is a developing fluid that reactswith the dye in SFD-502C to show smallcracks in the weld. Each part supplied in anozone friendly 500ml aerosol.
Flaw Detector DeveloperSF3-500BWhite film to highlight any faults which havebeen detected when using Flaw DetectorPenetrant. The product should be removedusing Flaw Detector Cleaner Spray oncecracks have been found and marked.
Flaw Detector Dye PenetrantSF2-500BHighly sensitive red dye, for use whendetecting flaws on metal components undernormal lighting conditions.
Flaw Detector Cleaner SpraySF1-500BQuick drying, powerful solvent for cleaningsurfaces prior to testing. Removes contaminants including oils,greases and grime.
BIG VALUE500ml Cans!
Leak Detector SpraySL1-400AA specially formulated, highperformance, white fluid,designed to identify even thesmallest gaseous leak.Applies a thin uniform film ofsurface active agents whichaccurately identify any leak orbleeding of joints, bubbles inthe applied film indicate thelocation of the leak. Propelledby compressed air - will notgive a false reading ifmechanical sensingequipment is used. Suitablefor use with most commongases including compressedair, acetylene, butane,propane, chlorine, hydrogenand natural gas.
Product Size Order CodeNumber SOL-732
SF3-500B 500ml -0280K
Product Order CodeNumber Size SOL-732
SL1-400A 400ml -0340K
Product Size Order CodeNumber SOL-732
SF2-500B 500ml -0260K
Product Size Order CodeNumber SOL-732
SF1-500B 500ml -0240K
Product Order CodeNumber Size SOL-732
SW1-400C 400gm -0840K
Order CodeSize SOL-7325ltr -9300K
20ltr -9310K
Maintenance WeldersAnti-Spatter FluidReduces the risk of joint puddling and greatly reduces preparation time prior to finalpainting. Does not affect any subsequentgalvanising orpaintingoperations.Evaporatesunder normalweldtemperatures. Dichloromethaneand silicone-free. Non-flammable,non-toxic, non-corrosive andbiodegradable.
Silicone Release SpraySR2-500B - Heavy Duty Heavy duty siliconelubricant and releaseagent. Formulated with ahigh silicone content.The product is suitablefor a wide range of uses.SR2-500B is a dry non-oily, non-greasy product.Water clear with noodour. Size: 500ml aerosol.
Product Size Order CodeNumber SOL-732
SR2-500B 500ml -0720K
Product Size Order CodeNumber SOL-732
SR3-500B 500ml -0740K
Mould Release Dry Film PTFE LubricantSR3-500BMould Release PTFE Dry Filmis a micro-thin surfacecoating that is used to coatthe inner surfaces ofinjection mouldingtools/dies, thus enablingeasy component release.The coating will not bridgecomplex mould profiles andwill not interfere withprecision fits. The appliedPTFE film will not transfer tothe moulded item. Theproduct can also be used inany location that requires adry slip surface such asproduction line slides, tracksor tables.Size: 500ml aerosol.
Silicone Release SpraySR1-500B - for Plastics & RubberHeavy duty siliconelubricant and releaseagent. Formulated with ahigh silicone content. The product is suitablefor a wide range of uses.SR1-500B is a dry non-oily, non-greasyproduct. Water clear with no odour. Size: 500ml aerosol.
Product Size Order CodeNumber SOL-732
SR1-500B 500ml -0700K
Page589PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2009
MAINTENANCE SPRAYS & LUBRICANTSGROUP
732Lu
brica
nts &
Chem
ical P
roducts
Chain & DriveSpray Lubricant
SM6-500BFormulated to have a wide range of operatinguses. Ideal lubricant for moving chains underextreme load and for chains not fitted withautomatic lubrication nor running in oil baths. Formulated with a ‘tackyadditive’ to resist ‘throwoff’ on rapidly movingchains and drives. Idealfor fork trucks/conveyersystems/motorcyclechains. Can be used as ageneral-purpose lubricantfor items subjected toextreme weatherconditions. Can be usedas a slideway lubricant formachine tools. Strong anti-rust qualities.Does not contain siliconeor CFCs.Size: 500ml aerosol.
EP Open Gear Spray
SM8-500B - With MolybdenumSolent EP Open Gear Spray lubricant is a premium extreme pressurelubricant packed in a 500ml aerosol. Based on molybdenumdisulphide anti-wearadditives. Suitable forlubricating all opengears where a thin filmis specified. Suitable fortemperatures as low as–40°C to +100°C.
Product Size Order CodeNumber SOL-732
SB1-500B 500ml -0060K
Product Size Order CodeNumber SOL-732
SM6-500B 500ml -0500K
Product Size Order CodeNumber SOL-732
SM8-500B 500ml -0540K
Drive Belt Dressing Spray
SB1-500BReduces slip on drive belts and helps to stopbelt squeal. Can be used on drive belts exposed to weather,ideal for farm machines,alternator drive beltsand fan belts. Helps tostop cracking andextends belt life. Can beused on rubber, leather,canvas and most typesof synthetic belts. Size: 500ml aerosol.
Container Size Order CodeType SSF-732
Aerosol 500ml -3450K
Wire RopeLube Spray
WRS500This spray lubricant has been formulated to lubricate and protect wire ropes from corrosion. It has good penetrative qualities to lubricate deep into the core of ropes, displacing water and increasing the life of the rope. ‘Hi Tack’ additives provide excellent adhesion to metal and reduced ‘fling off’ during use.Size: 500ml aerosol.
Container Size Order CodeType SSF-732
Aerosol 500ml -3500K
Chain & Drive SprayCCA500This product is a special blend of quality oils, greases and solvents, designed to lubricate and protect all types of cables and slow moving chains. It penetrates quickly into the centre of cables providing excellent protection to the core. It will not sling off, drip or dry out even in adverse conditions. It will also penetrate chain rollers and links enabling smoother working and reduce friction, wear and the possibility of seizure.Size: 500ml aerosol.
Sherwood STD
Spray400ml foam aerosol penetrates and is able to cling to normallyinaccessible areas and moving cutting edges.
Lubricant Weight Order CodeType
Sizeper 12 SHR-732
Spray 400ml 5.1kg -4000K
STD Tapping & Drilling LubricantThe Sherwood™ STD Tapping & Drilling foamcut 400ml aerosol spray (non-flammable CO2
propellant). Foam aerosol penetrates and is able to cling to normally inaccessible areas and moving cutting edges. Can be used on yellow metals without the risk of staining.
Sherwood STD Liquid (Poly Bottle)Low odour liquid. Coats the cutting edge witha film of EP additives.Sherwood STD CompoundLow melting point paste maintains a continual lubricant feed to the cutting edge. Hand applied. Suitable for the most severe cutting operations.
Lubricant Size Order CodeType SHR-732Foam 400ml -4200K
Pistol Grip Can Holder & SprayerFor use with standard diameter 300 - 415mlaerosol containers. Protects hands fromcold cans and chemical contact.
For Aerosol Weight Order CodeSize each KEN-732
300 - 415ml 55g -9500K
Lubricant Order CodeType
SizeSHR-732
Liquid 500ml -4020KLiquid 5ltr -4060K
Compound 500g -4040K
Page590 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2009
Lubri
cants
& C
hem
ical Pro
duct
sMARKERS - PAINT
GROUP
734
Colour Application Order CodeSOL-734
White General Marking -6020KYellow Hazard/Caution -6040KBlue Mandatory -6060K
Orange Chemical/Storage -6120K
Line Markers
Solent line marker is formulated witha high percentage of colour pigmentwhich gives a bright easy to seefinish and resists wear. Durable rapid drying formulation. Suitable for marking out car parks,factory/warehouse floors,playgrounds, sports fields, tenniscourts, leisure centres and roadsurfaces. Can be used with stencils,line or free hand marking. CFC-freeformula contains no lead additives.Fully compatible with major brandapplicators. Each aerosol is suppliedwith an extra spray nozzle to ensuregood spraying performance duringthe life of the aerosol. Size: 750ml can.
Colour Application Order CodeKEN-734
White General Marking -6020KYellow Hazard/Caution -6040KBlue Mandatory -6060KRed Prohibition/Danger -6080K
Green Safe Condition/Direction -6100KOrange Hazard/Caution -6120KBlack Deletes Existing Lines -6140KGrey Deletes Existing Lines -6160K
Line Markers
For use on car parks, factory/ warehouse floors, playgrounds, sportsfields, tennis courts, leisure centres and road surfaces. For stencils, line or free hand marking. CFC free formula, contains nolead additives. Fully compatible with major brand applicators. Size: 750ml can.
Please note, colours are for guidance only.
Please note, colours are for guidance only.
Line Marking GunManufactured from reinforced nylon. For offering trigger action to line marking spray cans, giving improved comfort duringprolonged use.
Description Order CodeKEN-715
Line Marking Gun -6200K
Colour Size Order CodeKEN-734
Yellow 46ml -3020KWhite 46ml -3040KBlue 46ml -3060K
Green 46ml -3080KBlack 46ml -3100KRed 46ml -3120K
Orange 46ml -3140K
Industrial Paint Markers Designed for countless metal marking applications. Can be used for marking greasy, rusty, or new metal surfaces. Also suitable for marking glass, plastic, wood, ceramics etc. Ballpoint nozzle cap will only allow ink flow when applied and pressed to the workpiece - inkcannot be spilt from the cap unintentionally. One head can beinterchanged from differing inks and bottles. Can be refilled fromone litre bulk refills of the specially formulated ink.
Material Ball Order CodeSize KEN-734
Nickel 2.4mm -3500K
Ballpoint Heads - NIckel Plated Steel
Ink Refill Cases
Colour Size Weight Order Codeeach KEN-734
Yellow 1ltr 1.4kg -3210KWhite 1ltr 1.4kg -3230K
Micrometer Paste
Oil-based paste for indicating high spots on machine bearings,machine tool beds etc. Easily removable with methylated spirit.
Colour Pack Order CodeSize MIR-734
Blue 28g Tube -8810B38g Tin -8800A
Permanent MarkersDesigned for use on all surfaces. Waterproof, low solvent content. Xylene-free.
Colour Pack Order CodeQuantity KEN-734
Black 10 -5020KBlue 10 -5060KRed 10 -5040K
Green 10 -5070K
PACK OF
10
Lubrica
nts &
Chem
ical P
roducts
GREASESGROUP
740Lithium Grease
HIgh Load EP No.2: A lithium-based heavy duty grease, withhigh resistance to water and powerful anti-wear agent.
Pack Size Order CodeType SOL-740
Cartridge 400g -6100KTub 3.00kg -6105LPail 12.5kg -6110M
Page591PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2009
Food Safe Penetrating Oil
Penetrating oil for dismantling, lubricatingand cleaning. This odourless oil istasteless and displaces water leaving ahydrophobic coating to protect surfacesfrom corrosion. It penetrates threads andcrevices to release and lubricate delicate mechanisms, pivotpoints and slidingsurfaces whilstdegreasing hardsurfaces. Can be usedas a light lubricant. FDA Compliant. NSF H1 registered.Food Safe. Synthetic.Translucent. Tastelesswater white fluid. Non-Toxic. Anti-corrosive.
Pack Order CodeSize SOL-740
500ml -5930D N/A
Food Safe High Tech GreaseFood safe synthetic PTFE grease is a fullysynthetic translucent non-melting greasethat allows fluid to penetrate into machineparts before setting to a No. 2 ratedgrease. It protects and lubricates with a non-toxic anti corrosiveshield for use onsliding and rollingelement bearingsurfaces, metal, woodand plastics.Manufactured fromnon-toxic lubricantingredients listed bythe FDA and is NSF H1 registered.Totally salt or freshwater resistant to beused inside and out ona range of machinery intemperatures rangingfrom -40°C to +340°C.
Food Safe Lubricating Oil
This lubricant is completely clear, odourlessand food safe, it contains no mineral hydrocarbons and meets with FDA and is NSF H1 registered. It is a hydrophobic oiland therefore does nottake in water, providinga barrier between watercondensation and metalsurfaces. This versatilelubricant can be used onsliding and rollingelement bearingsurfaces, metal, woodand plastics. Non-flammable. Non-Toxic. Anti-corrosive.Safe for use attemperatures from -60° to +260°C.
Pack Order CodeSize SOL-740
500ml -6220C N/A
Pack Order CodeSize SOL-740
500ml -5960G N/A5 litre -5970H N/A
Food Safe Silicone GreaseA versatile silicone grease for operation inextremes of high and low temperature. Canalso be used on food product applications orwhere water repellent properties are of primeimportance as it offers excellent physicalperformance and is NSF H1 registered. Non-melting, water repellent, odourless, non-toxic,low volatility. High Dielectric. Resistant tooxidation. Thermally stable ozone resistant.Minimal effects on rubbers, plastics andmetals. Unaltered by UV light.
Synthetic Grease
The latest generation food-safe grease. Constructedusing pure non-toxic syntheticbase oils, combined with PTFEand a complex mix ofantioxidant and EP packages,making it a versatile tool foruse in many applications formany industries. Completelyresistant to salt water andhigh humidity environments.Dielectric and can be used toprotect electrical equipmentfrom ingress of water.Lubricates bearings, chainsand sliding surfaces includingplastic bearings and runners.Has a wide temperatureoperating range –40°C to340°C. Grease clean foodsafe lubricant. Non-melting.
Pack Order CodeSize SOL-740100g -6250D N/A400ml -6260E N/A500g -6270F N/A
Pack Order CodeSize SOL-740
400ml -5900A N/A
Pack Order CodeSize SOL-740100g -6200A N/A400ml -6210B N/A
Food Safe White GreaseIntended use for lubrication of bearings,slides and all delicate mechanisms used inthe food manufacturing/processingindustry. Maximum operating temperature150°C with excellent load carrying capacityand water resistance. FDA Compliant. NSFH1 Registered. Non Toxic.
Top Related