ProductCatalogue
PublisherINA MAZIVA Ltd.Radnička cesta 175 10000 Zagreb
For the publisher:Andrej Šolaja, B.Sc. Eng
Editorial board
Editor-in-chiefDamir Andrić, B.Sc. Eng
EditorsBruno Novina, B.Sc. EngMiroslav Felja, B.Sc. Eng
MembersLjiljana Pedišić, B.Sc.Eng Mr. Kamil Nahal, B.Sc. EngTonća Ćaleta Prolić, B.Sc. Eng
Design and pre-pressNatalija ČatajNorma International
Zagreb, February 2014
3
This catalogue presents an overview of the regular line of INA lubricants
according to the type of application and general lubricant classifi cation adapted
to end user requirements. General data on application, quality level and basic
physical and chemical properties are listed for each product.
This catalogue does not include lubricants manufactured according to specifi c
end user requirements, or those lubricants that are manufactured according
to specifi c end user requirements in markets outside Croatia. Also not
i ncluded are related products from the additional program recommended
by the Application and Technical Department of INA MAZIVA Ltd. with the
purpose of system preparation and maintenance. Products marked with two
asterisks (**) are specifi cally tailored according to end user requirements and
products that may have a longer delivery time because of technological or
performance characteristics.
This catalogue is for the general use of INA lubricant users and INA employees,
with the basic purpose of assisting them in the selection of an appropriate
lubricant for specifi c applications. For more detailed information or professional
help in the selection of lubricants according to defi ned requirements,
specifi cations or due to specifi c working conditions, users can contact the
manufacturer directly at the addresses enclosed with this catalogue.
The INA lubricant program is produced at the INA MAZIVA Ltd. site, Radnička
cesta 175, Zagreb.
INA retains the right to modify the type and size of packaging according
to market requirements, to develop new products or improve the quality of
products listed in this catalogue.
Product information can also be found at www.ina.hr or www.maziva.hr.
Introduction
4
INA’s experts systematically follow trends in vehicle development, vehicle
equipment and industrial machines defi ned in lubricant specifi cations. The
lubricant formulations developed in laboratories were proven in numerous
practical and laboratory tests and represent the result of tradition, professional
fi ndings and experience in lubricant development and application. This tradition
is more than 125 years old. Besides that, INA has been maintaining contacts
with renowned manufacturers of vehicles and vehicle equipment for a number
of years, with the goal of obtaining the user permits for INA lubricants in
vehicles or vehicle equipment, and in industrial systems of companies such
as: BMW, Cincinnati Machine, Cummins, Denison Hydraulics, FAG, General
Motors, Husqvarna, JASO, MAN, Mercedes-Benz, MTU, Opel, Pielstick,
Renault, Steyr, Vickers, Voith, Volvo, Volkswagen-Audi-Seat-Škoda, ZF
Friedrichshafen and others.
INA’s experts are very proud of the valuable and noted recognitions they
received for their lubricants at international innovation fairs such as Eureka
in Brussels, Inpex in Pittsburgh, the Industrial Property Fair in Moscow,
numerous awards in Croatia, especially at the Inova Fair and the plaque of
the Croatian Chamber of Economy.
INA-Industrija nafte, Plc. Zagreb was one of the fi rst companies in Croatia
that introduced a quality management system, followed by an environmental
protection management system and health and safety management system.
Accordingly, INA MAZIVA Ltd. possesses certifi cates in accordance with the
ISO 9001:2000, ISO 14001:2004 standards and the OHSAS 18001:2007
specifi cation obtained from the company Bureau Veritas Quality International.
INA MAZIVA Ltd. laboratories possess the Certifi cate of Accreditation obtained
from the Croatian Accreditation Agency in accordance with the requirements
of the HRN EN ISO 17025:2007 standard.
It must be noted that INA aspires to avoid or reduce the impact on the
environment and people’s health. Therefore, INA lubricants do not contain
lead, organically bound chlorine, nitrites and diethanolamine, and the content
of phosphorus, zinc and antimony, etc. is reduced. The system for returning
waste and used oils has been in operation for a few years, and the offer in
INA lubricants sales and service was thus enriched.
Top Quality and Care fot the Environment and People's Health ljudi
5
ISO certifi cates
6
Today, modern and effective lubricant sales are unimaginable without quality
technical assistance of experts with wide knowledge and experience, quality
and certifi ed laboratories and prompt support of the entire chain, from
production through the sales network to the user and end customer, to the
fi nal management of the used product as hazardous waste. Considering all
the specifi c characteristics that mark today’s technology development, the
post-sale service is an indispensable connection between the end user, sales
and development, because lubricants are created and perfected on the basis
of information and quality standards that are set and conditioned by the
vehicle and equipment manufacturers. INA’s products, such as lubricating oils,
lubricating greases or products from the additional program in the context
of the total product assortment to satisfy customer needs, in these areas
traditionally represent a safe investment in a quality and cost-effective project
of effi cient needs satisfying for the lubrication of machines and vehicles in all
branches of industry, maritime affairs, construction industry, agriculture and
elsewhere. An important part of this support system lies in the activities of
the post-sales service maintained by INA for more than 40 years.
The post-sales service implies the care for the product during its use, which is
implemented by application engineers through contacting, visiting and talking
to the customers and product users, education and written texts.
For our customers and users, we ensure and distribute all the necessary
technical documentation on lubricants, which involves the following:
• recommendations and instructions for lubricant application;
• lubrication plans,
• technical product data,
• user permits for the application of INA lubricants obtained from renowned
vehicle and equipment manufacturers, and
• instructions on the management of waste oils.
Application engineers, experts in lubricants, know the issues of lubrication
and maintenance of machines and vehicles very well. Therefore they are of
especially signifi cant assistance to maintenance personnel in complex facilities
with long-term oil fi llings, in industry, as well as in car transport organizations,
shipping companies, thermo- and hydro-energy facilities etc., where a timely
and comprehensive control of the lubricant status in use is important for
safe and long-term operation. With the support of laboratories, using our
own experience and databases in the long and successful application of our
lubricants, we offer our customers additional safety in product valorization. In
the long-term, this approach signifi cantly reduces overall maintenance costs
and provides security in operation. Thus, mutual trust is built and the customers
are sure they will achieve optimal results by purchasing INA lubricants.
INA Lubricants post-sales services for the End User
7
16 process oils .......................................................................42
17 lubricants for die-casting of metals ..................................43
18 other industrial oils ............................................................43
C metalworking oils and fl uids
1 neat metalworking oils ...................................................... 47
2 metal forming lubricants ...................................................49
3 water-miscible metalworking fl uids ..................................49
4 auxiliary metalworking products ....................................... 51
5 heat treatment oils. ........................................................... 51
6 electric spark erosion oils .................................................52
D temporary corrosion preventives
1 mineral-oil-based corrosion preventives ..........................55
2 solvent-containing corrosion preventives ........................56
3 water-based corrosion preventives ..................................56
E technical cleaning products
1 petroleum-solvent based products ..................................59
2 water-based products ......................................................59
F automotive and industrial lubricating greases
1 lubricating greases for plain and rolling bearings ............65
2 lubricating greases for plain and rolling bearings
operating at heavy duty conditions ..................................66
3 lubricating greases for centralised chassis
lubrication systems ...........................................................69
4 biodegradable lubricating greases ................................... 70
5 greases for shipyard launching ways ................................71
G other products
A oils and fl uids for engines and automotive applications
1 passenger car engine oils ................................................. 11
2 engine oils for road and rail transport, earth-moving
and agricultural machinery ............................................... 13
3 motorcycle and scooter engine oils ................................. 15
4 two-stroke and four-stroke engine oils ........................... 15
5 marine engine oils............................................................. 16
6 automotive transmission oils and fl uids ........................... 18
7 lubricants and fl uids for hydrodinamic and
automatic transmissions ..................................................20
8 tractor oils .........................................................................22
9 oils for shock absorbers and dumper truck
hydraulic systems .............................................................23
10 automotive brake fl uids ....................................................24
11 automotive cooling system fl uids .....................................25
12 special automotive products ............................................ 27
B lubricants and related productsfor industrial use
1 hydraulic oils and fl uids ..................................................... 31
2 biodegradable hydraulic fl uids ..........................................32
3 fi re-resistant hydraulic fl uids .............................................32
4 hydraulics and slideway oils .............................................33
5 circulating oils ...................................................................33
6 lubricants for enclosed industrial gears ...........................34
7 open gear and wire cable lubricants ................................36
8 chain lubricants ................................................................ 37
9 textile machinery oils ........................................................38
10 turbine oils ........................................................................38
11 air and screw compressor oils .........................................39
12 refrigeration compressor oils............................................39
13 pneumatic tool oils............................................................40
14 heat transfer oils ...............................................................40
15 electric insulating oils and cable compounds ...................41
Ta
ble
of
Co
nte
nts
Aoils and fl uids for engines
and automotive applications
A
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
11
1 passenger car engine oils
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
TBN,mg KOH/g General Description – Applications – Performance Levels – Specifi cations
INA Millennium 5W-40 14,0 11,0
Fully synthetic top-quality engine oil designed for comprehensive lubrication of all modern four-stroke gasoline and diesel engines of passenger cars and smaller delivery vehicles. Excellent characteristic of cold start and vehicle protection against wear along with reduced fuel consumption. Meets the requirements of: ACEA A3/B4-04, API SL/CF, MB 229.3, VW 502.00/505.00, BMW Longlife-98.
INA Ultra Star FE 5W-30 12,0 6,5
Fully synthetic top quality “low SAPS“ engine oil that enables fuel saving, intended for high performance gasoline and diesel engines of passenger cars with built-in modern Three Way Catalysts (TWC) or particle fi lters (DPF). Meets the requirements of: SAE 5W-30; ACEA C3-10. Approved for: VW 504.00/507.00, MB-Approval 229.51, BMW Longlife-04.
INA Star 5W-40 13,5 7,5
Synthetic top quality “low SAPS“ engine oil for lubrication of high-performance gasoline and diesel engines of passenger cars and smaller delivery vehicles with built-in modern Three Way Catalysts (TWC) or particle fi lters (DPF). Optimal lubrication at extreme temperatures, enabling immediate motor start at low temperatures. Meets the very strict requirements of: ACEA A3/B4-04 and C3-10, API SN/CF, BMW Longlife-04.Approved for: VW 505.01/505.00/502.00, MB-Approval 229.51
INA Ultra Sint 5W-30 12,0 11,5
Synthetic engine oil for lubrication of modern gasoline and diesel engines of passenger cars which enables fuel saving with an extended oil drain period. Meets the requirements of: SAE 5W-30, ACEA A3/B4-10, API SL/CF, Opel GM-LL-A-025, Opel GM-LL-B-025 and Renault RN0700.Approved for: VW 502.00/505.00, MB-Approval 229.5, BMW Longlife-01.
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
12INA Code SAE Viscosity
Grade
Kinematic Viscosity at
100 °C, mm2/s
TBN,mg KOH/g General Description – Applications – Performance Levels – Specifi cations
INA Delta Sint 10W-40 14,2 8,5
Synthetic high-performance engine oil designed for lubrication of most modern four-stroke gasoline and diesel engines of passenger cars and smaller delivery vehicles, including engines with turbochargers and catalysts.Meets the requirements of: ACEA A3/B3-08 and A3/B4-08, API SL/CF. Approved for: MB-Approval 229.3 and VW 502.00/505.00.
INA Delta Sint Diesel
10W-40 14,2 8,5
Synthetic high-performance engine oil designed for lubrication of most modern four-stroke diesel engines of passenger cars and smaller delivery vehicles, including engines with turbochargers and catalysts.Meets the requirements of: ACEA A3/B3-08 and A3/B4-08, API SL/CF, MB 229.3 and VW 502.00/505.00.
INA Delta 515W-4020W-50
14,518,5
8,58,5
Standard quality mineral engine oil for lubrication of four-stroke gasoline and diesel motors of passenger cars and smaller delivery vehicles. The SAE 20W-50 viscosity grade is particularly recommended for engines whose engine systems are more worn out and whose oil consumption is increased. Meets the requirements of API SJ/CF, CCMC G4/PD2, MIL-L-46152D.
INA Delta 5 Silver15W-4020W-50
14,518,5
5,55,5
Mineral engine oil suitable for lubrication of four-stroke gasoline and diesel engines of passenger cars without a turbocharger and catalyst, including vehicles that run on natural gas and do not require special quality engine oil. The SAE 20W-50 viscosity grade is particularly recommended for engines in which engine systems are more worn out and whose oil consumption is increased.Meets the requirements of: API SF/CD, CCMC G2, MIL-L-46152C.
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
13
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
TBN,mg KOH/g General Description – Applications – Performance Levels – Specifi cations
INA Super 2009 10W-40 13,7 10,0
Top quality synthetic “low SAPS” engine oil primarily intended for lubrication of diesel engines of industrial vehicles in heavy duty conditions, with a particle fi lter (DPF) and an EGR or SCR system for processing exhaust gases that meet the Euro 4 / Euro 5 requirements regarding exhaust gas emission. Meets the very strict requirements of: ACEA E6-10/E7-10, API CI-4, MTU Type 3.1, Deutz DQC III-10, Cummins CES 20077/20076.Approved for: MB-Approval 228.51, MAN M 3477, Volvo VDS-3, MackEO-N and Renault VI RLD-2.
INA Super 2000 5W-30 11,7 12,5
Top quality fully synthetic Extra High Performance Diesel (XHPD) engine oil designed for use in Euro 3 and Euro 4 diesel engines. It is suitable for lubrication of most diesel engines with an exhaust gas recirculation (EGR) or a selective catalyst (SCR) and for engines without particle fi lters (DPF). The oil ensures extraordinary cleanliness of the engine, signifi cant reduction of the wearing out of engine parts, formation of soot and sediment, and cylinder polishing.Meets the requirements of: SAE 5W-30, ACEA E7-08 issue 2/E4-08 issue 2, API CI-4, Caterpillar ECF-2, MTU Type 3, Deutz DQC IV-10 and DAF HP1/HP2.Approved for: MB-Approval 228.5, MAN M 3277, MAN M 3377, Volvo VDS-3, Mack EO-N, Renault VI RLD-2 and Cummins CES 20078/20077/20076.
INA Super 2000 10W-40 14,0 13,0
Top quality synthetic Extra High Performance Diesel (XHPD) engine oil for lubrication of Euro 3 and Euro 4 diesel engines of industrial vehicles that operate in the most diffi cult conditions, have an extended oil drain period and use diesel as fuel. It is suitable for lubrication of engines with EGR or systems for processing exhaust gases and for engines without particle fi lters (DPF). Meets the very strict requirements of: ACEA E7-08/E4-08, API CI-4/CF, and MTU Type 3.Approved for: MB-Approval 228.5, MAN M 3277, Volvo VDS-3, Mack EO-N and Renault VI RLD-2.
2 engine oils for road and rail transport, earth-moving and agricultural machinery
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
14INA Code SAE Viscosity
Grade
Kinematic Viscosity at
100 °C, mm2/s
TBN,mg KOH/g General Description – Applications – Performance Levels – Specifi cations
INA Super Max 15W-40 14,5 10,5
Super High Performance Diesel mineral engine oil for lubrication heavily loaded diesel engines of industrial vehicles with turbochargers in extreme heavy duty conditions that use Eurodiesel as fuel, enabling signifi cantly extended oil drain periods. It is suitable for lubrication of engines without particle fi lters (DPFs) and most engines with EGR or SCR systems of exhaust gas processing.Meets the requirements of: ACEA E7-08/E5-02/E3-96 issue 4, API CI-4/ CH-4/CG-4/SL, Caterpillar ECF-2 and Volvo VDS-3.Approved for: MB-Approval 228.3, MAN M 3275-1, and Cummins CES 20078/20077/20076.
INA Super Turbo 15W-40 14,5 12,0
Super High Performance Diesel (SHPD) mineral engine oil designed for use in high performance Euro 1 / Euro 2 diesel engines of industrial vehicles that operate in heavy duty conditions, with extended oil drain periods, and use all kinds of diesel fuels. Meets the requirements of: ACEA E3-96 issue 4, API CG-4/CF/SL, MTU Type 2.Approved for: MB-Approval 228.3, MAN M 3275-1 and Volvo VDS-2.
INA Super 515W-40
3040
14,511,214,5
11,011,011,0
High quality mineral engine oil intended for lubrication of all kinds of diesel engines in industrial vehicles, with no special modern requirements, in diffi cult operating conditions in transport, construction, agriculture, etc. It is suitable for use in mixed car and machine parks. Meets the requirements of: SAE 30 & 40: ACEA E2-96 issue 5, API CG-4/CF/SL, MB 228.0, MAN 270, Volvo VDS and MTU Type 1.SAE 15W-40: ACEA E2-96 issue 5, API CG-4/CF/SL, MTU Type 1.Approved for (SAE 15W-40): MB-Approval 228.1, MAN 271and and Volvo VDS.
INA Super 3
15W-4010W
20W-20304050
14,56,08,5
11,214,518,5
9,59,09,09,09,09,0
Multi-purpose mineral engine oil designed for lubrication of diesel engines in industrial vehicles that use all kinds of diesel fuels. Used in road transport, maritime affairs, construction business, industry and agriculture. It can also be used in air compressors, less heavily loaded gearboxes, hydraulic systems, etc. Meets the requirements of: API CF/SF, MIL-L-2104D.Approved for: ZF TE-ML 04B (SAE 30) and Pielstick (SAE 30 & 40).
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
15
INA CodeKinematic
Viscosity at 100 °C, mm2/s
Flash point (COC),°C General Description – Applications – Performance Levels – Specifi cations
INA 2T Scooter 10,3 90Top quality partially synthetic, low-ash engine oil serves as a fuel additive for lubrication of two-stroke engines, especially mopeds and road scooters. Meets the requirements of API TC++, ISO-L-EGD, JASO FD, TISI 1040-1998.
3 motocycle and scooter engine oils
4 two-stroke and four-stroke engine oils
INA CodeKinematic
Viscosity at 100 °C, mm2/s
Flash point (COC),°C General Description – Applications – Performance Levels – Specifi cations
INA Outboard Plus 7,4 100
Premium high-performance mineral-based engine oil serves as a fuel additive for lubrication of water-cooled outboard two-stroke gasoline engines of great power. Recommended for Yamaha, Mercury, Honda, Suzuki, Tohatsu, Johnson, OMC.Meets the requirements of engine tests Mercury 15HP, OMC 40HP, OMC 70HP and placed on the NMMA TC-W3 list.
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
TBN,mg KOH/g General Description – Applications – Performance Levels – Specifi cations
INA Lokomol HS 40 14,5 13,5
Special fi fth generation mineral engine oil, specially developed for two-stroke General Motors engines – Electro Motive Division locomotive diesel engines, with our without turbo-charge, using fuels with an increased share of sulfur. Meets the requirements of: API CF/CF-2, LMOA 5th generation. Approved for: General Motors - EMD.
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
16
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
TBN,mg KOH/g General Description – Applications – Performance Levels – Specifi cations
INA Actinia B 50 19,5 70,0
High-quality marine cylinder mineral oil for single use, specially designed for lubrication of pistons and cylinders of low-speed marine crosshead diesel engines used in boat propulsion. High-alkaline oil reserve enables the use of heavy residual fuels with high sulfur content.
INA Rubella X3040
11,714,5
40,040,0
High-quality multi-purpose mineral engine oil designed for lubrication of cylinders and crankcase systems of medium-speed diesel marine engines with no crosshead, burning residual fuels, where more diffi cult conditions create a need for a higher alkaline oil reserve. Meets the requirements of API CF and passes the 11th FZG test damage load stage.
5 marine engine oils
INA Ultra Garden 4T 30 10,7 7,4
High-quality mineral-based lubricant designed for use in four-stroke gasoline engines in lawnmowers, mowing tractors, rotational diggers, motor cultivators, snow machines, generators, etc. In accordance with the requirements of MTD, Briggs & Stratton, Honda and other renowned equipment manufacturers. Meets the requirements of: SAE 30, API SJ/CF, CCMC G4/PD2, MIL-L-46152D.
INA CodeKinematic
Viscosity at 100 °C, mm2/s
Flash point (COC),°C General Description – Applications – Performance Levels – Specifi cations
INA 2 Taktol ST Plus 8,2 96High-quality low ash engine oil serves as a supplement to fuel for lubrication of air-cooled two-stroke engines, especially chainsaws. Meets the requirements of API TC+, JASO FC and ISO L-EGC.
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
TBN,mg KOH/g General Description – Applications – Performance Levels – Specifi cations
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
17
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
TBN,mg KOH/g General Description – Applications – Performance Levels – Specifi cations
INA Rubella3040
11,714,5
30,030,0
Premium quality multi-purpose mineral engine oil designed for lubrication of cylinders and crankcase systems of medium-speed diesel marine engines with no crosshead, operating on residual fuels with sulfur content below 3.5 % w/w. Suitable also for lubrication of gearboxes, stern tube, deck machinery and other equipment. Meets the requirements of API CF and passes the 11th FZG test load stage. Approved for Pielstick.
INA Gorgonela S
30405060
11,714,518,523,5
12,512,512,512,5
Premium-quality multi-purpose mineral engine oil intended for lubrication of high-speed and medium-speed main propulsion and auxiliary marine engines that operate on distillate diesel fuels having sulfur content up to 1% w/w. Can be used for lubrication of geared transmissions, turbochargers, variable pitch propellers, stern tube bearings, deck machinery, etc. Meets the requirements of: API CF, MIL-L-2104C and passes the 11th FZG test load stage.Approved for: ZF TE-ML 04B (SAE 30) and Pielstick (SAE 30 & 40).
INA Sagartia3040
11,714,5
8,08,0
Quality multi-purpose mineral engine oil primarily designed for crankcase lubrication of low-speed two-stroke diesel marine engines that burn heavy residual fuels and have special cylinder lubrication. Can be used for lubrication of all auxiliary engines in ships and on land, gearboxes, turbochargers, compressors, in hydraulic systems, in variable pitch propellers, stern tube bearings, deck machinery etc. Meets the requirements of: API CD, MIL-L-2104C, DIN 51506-VCL and passes the 12th FZG test load stage.
INA Sagartia S3040
11,714,5
5,05,0
Multi-purpose mineral engine oil designed for crankcase lubrication in low-speed two-stroke marine diesel engines that burn heavy residual fuels. Can be used for lubrication of gearboxes, turbochargers, compressors, in hydraulic systems, stern tube bearings, deck machinery, etc. Passes the 10thFZG test load stage.
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
18
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
ViscosityIndex General Description – Applications – Performance Levels – Specifi cations
INA Hipenol TDL 80W-90 15,3 103
Multi-purpose oil for gear transmissions, especially recommended for application in portal axles of low-fl oor buses manufactured by MAN and Mercedes-Benz. Meets the requirements of API GL4 and GL-5, API MT-1, MIL-PRF-2105E, Volvo 97310 axle and Scania STO 1:0.Placed on the lists ZF TE-ML 02B, 05A, 12L, 12M, 16B, 17B, 19 B and 21A,MAN 342 Typ M2 and MAN 341 Typ Z2 and E2.
INA Hipenol GTL HD 80W-90 14,7 100
Mineral-based multi-grade oil for heavily loaded hypoid gear transmission. Recommended for use in vehicles manufactured by Steyr, Iveco, Scania, MAN and TAM.Placed on the lists MAN 342 Typ M1 and ZF TE-ML 16B, 17B, 19B and 21A.
INA Hipenol GTL HD 85W-140 26,2 97
Mineral-based multi-grade oil for heavily-loaded hypoid gear transmission. Recommended for use in vehicles manufactured by Steyr, Iveco, Scania and TAM.Placed on lists ZF TE-ML 16D i 21A. Exceeds the requirements of API GL-5 and MIL-L-2105D.
INA Hipenol GTL DB 90 17,0 92Single-grade mineral-based oil for heavily-loaded hypoid gear transmissions. Application approvals: MB-Approval 235.0, MAN 342 Typ M1, ZF TE-ML 07A, 08, 16C, 17B, 19B and 21A, exceeds the requirements of API GL-5.
6 automotive transmission oils and fl uids
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
ViscosityIndex General Description – Applications – Performance Levels – Specifi cations
INA Hipenol SHD 75W-90 15,4 154
Multi-purpose synthetic oil for heavily-loaded commercial vehicle gear transmission and construction machinery. Meets the requirements of API GL-4 and GL-5, API MT-1, MIL-PRF-2105E, Mack GO-J, Scania STO 1:0.Placed on the lists of lubricants ZF TE-ML 02B, 05B, 12B, 16F, 17B, 19C and 21B, MAN 342 Typ M3 and MAN 341 Typ Z2 and E3. Also approved by the Henschel company for the application in gearboxes of low-fl oor trams.
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
19
INA Code SAE Viscosity Grade
Kinematic Viscosity at 100 °C,
mm2/s
Viscosity Index General Description – Applications – Performance Levels – Specifi cations
INA Transmol HD 75W-80 9,5 128
Premium semi-synthetic multi-grade oil for lubrication of latest gearbox constructions with or without a ZF intarder. It offers extended oil drain periods up to 320 000 km or every two years.Placed on the list MAN 341 Typ E3, exceeds the requirements of API GL-4.
INA Transmol HD 80W-90 15,8 100
Mineral-based multi-grade oil for optimal lubrication of all gearboxes of heavily-loaded commercial vehicles and in diffi cult winter and summer conditions. Placed on lists MAN 341 Typ Z2 and Typ E1, ZF TE-ML 02B and 17A and exceeds the requirements of API GL-4.
INA Transmol DB 80W 9,9 95
Mineral-based oil for application in all gearboxes of heavily-loaded commercial vehicles.Application approvals: MB-Approval 235.1, MAN 341 Typ Z2 and Typ E1, ZF TE-ML 02B and 17A, exceeds the requirements of API GL-4.
INA Umol ZC 80W-90 16,0 95
Multi-grade mineral-based oil for optimal lubrication of gearboxes and differential-gearbox groups, without a pair of hypoid gears. Recommended for gear transmissions of Fiat vehicles and gearboxes of Iveco, Fiat and other vehicles. Meets the requirements of API GL-3 and Fiat 9.55550.
INA Epol SP 68 80 8,5 90Mineral-based oil for motorbike gearboxes and low-power outboard engines gearboxes.Meets the requirements of US Steel 224 and AGMA 9005-E02.
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
ViscosityIndex General Description – Applications – Performance Levels – Specifi cations
INA Hipenol GTL LS 90 17,0 94
Specially-developed mineral-based transmission oil formulated for limited-slip differentials.Placed on lists ZF TE-ML 05C, 12C, 16Eand 21C, exceeds the requirements of API GL-5.
INA Hipenol GTL
80W90
80W-90140
9,317,314,028,0
10092
10090
Mineral-based oils for heavily-loaded hypoid gear transmissions. Meets the requirements of API GL-5, and the SAE 80W-90 gradation meets the MIL-L-2105D specifi cation.
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
20
INA CodeKinematic
Viscosity at 100 °C, mm2/s
Viscosity Index General Description – Applications – Performance Levels – Specifi cations
INA ATF Ekstra 7,5 195
Premium fully-synthetic multi-.purpose oil for automatic transmissions and power steering units of road and off-road vehicles with extended oil drain periods up to 120 000 km. Meets the very strict requirements of GM Dexron IIE, Allison C-4, Caterpillar TO-2, Ford Mercon, and other manufacturers such as Renk, Sperry-Vickers, Denison and Sundstrand. Placed on lists ZF TE-ML 04D, 09X, 14B, 16L and Voith H55.6336.XX (G 1363).
INA ATF DX III 7,5 174
Multi-purpose mineral- and hydrocracked oil (HVI) based oil designed for use in automatic transmissions power steering units of road and off-road vehicles.Meets the requirements of GM Dexron IIIG, Ford Mercon, Allison C-4, Caterpillar TO-2, as well as the requirements of other manufacturers such as Sperry-Vickers, Denison and Sundstrand. Placed on lists MAN 339 Typ Z1 and ZF TE-ML 04D, 14A and 17C.
INA ATF DX IID 7,7 157
Multipurpose mineral-based oil for automatic transmissions, meeting the requirements of a large number of oil specifi cations for automatic transmissions of road and off-road vehicles, power steering units due to its high level of quality. It can be used as hydraulic oil for industrial and moving machinery. Meets the requirements of GM Dexron IID, Allison C-4, Caterpillar TO-2. Placed on lists MAN 339 Typ Z1 and V1, ZF TE-ML 02F, 03D, 04D, 14A, 17C and Voith H55.6335.XX (G 607).
INA ATF Super 7,7 150
Multi-purpose mineral-based oil designed for use in automatic transmissions and power steering units of road and off-road vehicles.Meets the requirements of GM Dexron IID, Allison C-4 and Caterpillar TO-2. Application approvals: MB-Approval 236.6, ZF TE-ML 03D, 04D, 11A, 14A, 17C, Voith H55.6335.XX (G 607), MAN 339 Typ V1 and MAN 339 Typ Z1.
INA ATF TASA 7,7 172Mineral-based oil applied in fi lling automatic transmission and torque converters in motor vehicles and construction machinery, bulldozers, loaders, graders, etc. for which GM Type A Suffix A quality level is prescribed.
7 oils for hydrodynamic and automatic transmissions
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
21
AINA Code
Kinematic Viscosity at
100 °C, mm2/s
Viscosity Index General Description – Applications – Performance Levels – Specifi cations
INA Fluid V 32 5,4 100
Highest-quality mineral-based oil for lubrication of hydrodynamic transmissions with or without gears, couplings, torque converters and various hydraulic devices. It is especially recommended for turbo couplings and type R, S, TP, and T converters. Application approvals according to Voith 3625-006058, 3625-006072, 3625-006073 and 3625-008426 specifi cations.Meets the strict requirement of Voith 3.90-8 specifi cation, placed on the list Voith Turbo 120.00059010, Index 2 (earlier 3.285-149).
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
ViscosityIndex General Description – Applications – Performance Levels – Specifi cations
INA Transmatik10W30
5,911,3
10395
Single-grade oils developed according to the strictest requirements of heavily loaded construction machinery vehicle Caterpillar and Komatsu. Recommended for lubrication of gearboxes and gears of fi nal drives, brakes, couplings as well as torque converters and for supplying hydraulic systems. It can be used for diesel engines as well, although Caterpillar does not recommend this kind of application. Meets the requirements of API CF, Caterpillar TO-4, Allison C-4, Komatsu KES 07.868.1 placed on lists ZF TE-ML 03C (INA Transmatik 10W) and ZF TE-ML 03C, 07F (INA Transmatik 30).
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
22
A
8 tractor oils
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
TBN,mg KOH/g General Description – Applications – Performance Levels – Specifi cations
INA Agrina10W-3010W-40
10,6014,80
11,8011,80
Quality multi-purpose mineral-based Super Tractor Oil Universal (STOU) specially developed for agricultural applications. As a unique lubricant it is used for lubrication of engines, transmissions, wet brakes and hydraulic systems of tractors and other agricultural machinery. Meets the requirements of: API CG-4/SF, API GL-4, MIL-L-2104D, Massey Ferguson M 1139/M 1144/M 1145, Ford ESN M2C-159B/C, John Deere J27 and Caterpillar TO-2.Approved for ZF TE-ML 06B and 07B.
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
Viscosity Index General Description – Applications – Performance Levels – Specifi cations
INA Transhidrol ZF 20W-40 13,4 120
Premium mineral-based Universal Tractor Transmission Oil (UTTO) for lubrication of hydraulics and gear transmissions, and for cooling and lubrication of wet brakes in the latest types of tractors, developed according to special requirements of ZF transmission manufacturers. It is recommended for application in tractors as well as in construction machinery John Deere, Volvo Off Road, CNH, Steyr, Renault, Lindner, SAME Deutz-Fahr, Doppstadt, AGCO Fendt, etc. Placed on lists ZF TE-ML 05F, 06K, 17E and 21F.
INA Transhidrol 10W-30 10,3 162
Top quality multi-purpose mineral based oil (UTTO) used for lubrication of hydraulics and gear transmissions, and for cooling and lubricating wet brakes in the most modern types of tractors. It is especially recommended for lubrication of axles operating under heavy load, joint shafts and fi nal drive gearboxes. Meets the specifi cation requirements: API GL-4, Caterpillar TO-2, John Deer J20C, Case MS 1207, Ford M2C 134 D, Ford M2C 86-C, Massey Ferguson CMS M1143, Volvo WB 101.
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
23
INA Code SAE Viscosity Grade
Kinematic Viscosity at
100 °C, mm2/s
Viscosity Index General Description – Applications – Performance Levels – Specifi cations
INA Transhidrol JD 50
80W 9,8 120
Premium mineral-based Universal Tractor Transmission Oil (UTTO) for lubrication of hydraulics and transmission and for cooling and lubrication of wet brakes in all types of modern tractors, primarily John Deere, Steyr, Univerzal and Fiat.Meets the requirements of: API GL-4, Caterpillar TO-2, John Deere J20C, Case MS1207, Ford M2C 86-C and M2C 134-D, Massey Ferguson M1143 and Volvo WB 101. Placed on lists: ZF TE-ML 03E, 05F, 06K, 17E and 21F.
INA Transhidrol 85 85W 11 100
Premium mineral-based Universal Tractor Transmission Oil (UTTO) for lubrication of hydraulics and transmission and for cooling and lubrication of wet brakes in modern tractors, for tractors MASSEY FERGUSON, English tractors FORD and IMT.Meets the specifi cations of API GL-4, Caterpillar TO-2, Massey FergusonM1135 and Ford M2C 86-B.
INA CodeKinematic
Viscosity at 40 °C, mm2/s
PourPoint °C General Description – Applications – Performance Levels – Specifi cations
INA Amortizol HPS Plus
14,0 -60
Specially-refi ned, high-viscosity-index, low-pour-point mineral oil. Especially suitable for sensitive hydro-pneumatic shock absorbers, systems and brakes, control mechanisms, automatic pilots, transport lines, servo units, etc.Meets the requirements of military specifi cation MIL-H-5606.
INA Amortizol 377 13,4 -50High-viscosity-index, low-pour-point mineral oil for fi lling hydraulic shock absorbers in all weather conditions.
INA Hidraol DVC 22 22,0 -45Mineral oil for shock absorbers and automotive dumper truck hydraulics in modern vehicles and similar machines in all weather conditions. Meets the requirements of DIN 51524/2 HLP specifi cation.
9 oil for shock absorbers and dumper truck hydraulic systems
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
24
10 automotive brake fl uids
INA Code Wet Boiling Point °C
BoilingPoint °C General Description – Applications – Performance Levels – Specifi cations
INA UKA 5.1 182 278
Synthetic hydraulic-brake fl uid with high-balance wet boiling point and low viscosity at low temperatures for use in latest vehicles and especially intended for braking systems with the combination of ASB, ASC and ESP/DSC braking regulation devices.Meets the requirements of ISO 4925 Class 5-1, SAE J1704 and US FMVSS 116 DOT 5.1 and DOT 4
INA UKA 4+** 173 272
Synthetic hydraulic brake fl uid for automotive applications, especially in passenger cars where low viscosity at low temperatures enables uninterrupted operation of the braking regulation devices in passenger cars (ABS, ASC and ESP). Meets the requirements of: ISO 4925 Class 6, SAE J1704, US FMVSS 116 DOT 4 and DOT 3.
INA UKA 4 170 265Synthetic fl uid designed for fi lling hydraulic brakes and hydraulic couplings in motor vehicles.Meets the requirements of: ISO 4925 Class 4, SAE J1704, US FMVSS 116 DOT 4 and DOT 3.
INA UKA 3 150 230Synthetic fl uid for hydraulic braking systems and hydraulic couplings in motor vehicles. Meets the requirements of ISO 4925 Class 3, SAE J1703 and US FMVSS 116 DOT 3.
** Izrađuje se prema posebnoj narudžbi
INA CodeKinematic
Viscosity at 40 °C, mm2/s
PourPoint °C General Description – Applications – Performance Levels – Specifi cations
INA Kiperol 20 10,0 -40
Mineral oil for dumper truck hydraulics and hydraulics of similar machines in all weather conditions. It is especially recommended for dumper hydraulics of Mercedes Benz vehicles. Meets the requirements of DIN 51524/2 HLP specifi cation.
INA Hidraol HVP 46 46,0 -36Special mineral oil for highly-loaded Poclain hydraulic machines.Meets Case Poclain P99032-01Z requirements and ISO 6743/4 HV classifi cation.
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
25
INA Code
Freezing point of antifreeze-
water (1:1) mixture °C
BoilingPoint °C General Description – Applications – Performance Levels – Specifi cations
INA Antifriz BS Super
-37 180
Ethylene-glycol-based fl uid without silicates, intended for the protection of engine and vehicle cooling systems from freezing in winter and boiling over in summer, providing protection from corrosion with extended drain period.. INA Antifriz BS Super is a concentrate that must be mixed with water before use. Meets the requirements of VW/Audi/Seat/Škoda TL 774 D/F and MTU MTL 5048.Application approval MAN 324 Typ SNF.
INA Antifriz Al Super -37 175
Ethylene-glycol-based fl uid with the addition of appropriate additives for the protection of the engine cooling system against freezing in winter and boiling over in summer, providing outstanding protection from corrosion, especially aluminum alloys. Before use mix with water in a suitable ratio. It can be used in central heating systems. Completely meets the requirements of VW/Audi/Seat/Škoda/Porsche TL 774 C, BMW N 600 69.0, Opel/GM B 040 0240, Saab 6901599. Application approvals: MB-Approval325.0, MAN 324 Typ NF, MTU MTL 5048, Deutz TR 0199-99-1115 and TR 0199-99-2091 (KHD H-LV 0161 0188).
INA Antifriz Super -35 165
Ethylene-glycol-based fl uid designed for protection of engine cooling system from freezing in the winter and boiling over in the summer, with very good anticorrosive properties. Before use mix with water in the appropriate ratio.Meets the requirements of the standard BS 6580, ASTM D 3306 and AFNOR NF R15-601.
11 automotive cooling system fl uids
INA CodeKinematic
Viscosity at 100 °C, mm2/s
PourPoint °C General Description – Applications – Performance Levels – Specifi cations
INA LHM+ 6,5 -50Special mineral-based hydraulic oil color coded green. It is applied in hydro-pneumatic systems and braking systems of Citroën vehicles.Meets the requirements of the specifi cation Peugeot-Citroën-Talbot B 71 2710.
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
26INA Code Freezing
Point °CBoilingPoint °C General Description – Applications – Performance Levels – Specifi cations
INA Antifriz BS 40 -37 109
Ready-mixed ethylene glycol based cooling fl uid with no silicate content, intended for direct fi lling of engine cooling systems. Provides protection of the engine cooling system from freezing in the winter and boiling over in the summer, and ensures protection from corrosion with extended drain period.
INA Antifriz Al 40 -37 108Ready-mixed ethylene-glycol-based cooling fl uid for direct fi lling of engine cooling systems. Provides protection of the engine cooling system against freezing in winter and boiling over in summer, along with outstanding anticorrosive properties, especially aluminum alloys.
INA Antifriz 40 -35 107
Ready-mixed cooling fl uid based on ethylene-glycol and appropriate additives for protection against corrosion, intended for direct fi lling of engine cooling systems. Provides protection of the engine cooling system from freezing in winter and boiling over in summer and against corrosion. It is recommended to change the cooling fl uid after a period of two years.
INA Antifriz ELC 40 -36 108
Ethylene-glycol-based cooling fl uid, intended for protection of the engine cooling system against freezing in the winter and boiling over in summer, providing long-term protection against corrosion of all engine metals, including aluminum and iron alloys. The ready-mixed fl uid is intended for direct fi lling of cooling systems in heavily loaded diesel, gasoline and gas engines of high power, as well as stationary machines. It contains extended-life carboxylate inhibitors, as well as nitrites and molybdates that protect the engine from cavitation. Since the product does not contain silicates, the heat transmission is better than in conventional cooling fl uids with silicates. INA Antifriz ELC 40 meets the requirements of specifi cations CAT EC-1 and ASTM D 6210, as well as the requirements of most manufacturers of heavily loaded vehicles: Caterpillar, Cummins, Detroit Diesel, International, Mack and Volvo. Also meets the requirements: ASTM D 3306-00a Type III; ASTM D 6210; TMC RP 329; TMC RP 338 and SAE J1034
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
27
INA Code Density at 20 °C, g/cm3
pH value of 10% solution General Description – Applications – Performance Levels – Specifi cations
AdBlue 1,09 9,9
AdBlue is a 32.5% solution of urea in demineralized water. It is injected into the SCR catalyst (selective catalytic reduction catalyst) in the latest heavily loaded diesel vehicles (trucks, industrial vehicles and buses) in order to meet the requirement for emission according to the EURO 4 and EURO 5 standards.AdBlue is fi lled into a special container in the vehicle. The adding amount is 4–5 volume % for the amount of fuel in vehicles with EURO 4 engine type and 5–6 volume % for the amount of fuel in vehicles with EURO 5 engine type. It meets the requirements of the ISO 22241-1 specifi cation.
INA Code BoilingPoint °C
PourPoint °C General Description – Applications – Performance Levels – Specifi cations
INA Pneumol 80 -60Alcohol-based fl uid assures the correct functioning of air brakes in vehicles and pneumatic systems and machines, even at low temperatures.
INA Zimski Autoglas 86 -25Ethyl alcohol-based fl uid designed for cleaning automobile windscreens. Cleans surfaces from inorganic and organic stains. Does not freeze up to -25 °C.
INA Autoglas E 30 87 -30Ethyl alcohol-based fl uid designed for cleaning automobile windscreens in the winter period. Easily removes all inorganic and organic stains. Does not freeze up to -30 °C.
INA Autoglas 100 -3Fluid designed for cleaning automobile windscreens only during the summer period. Ensures great visibility and removes inorganic and organic stains, particularly insect remains.
12 special automotive products
oils
and
fl u
ids f
or
eng
ine
s a
nd
a
uto
mo
tive
ap
plic
atio
ns
A
28
Blubricants and related products
for industrial use
B
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
31
B
1 hydraulic oils and fl uids
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
ViscosityIndex General Description – Applications – Performance Levels – Specifi cations
INA Hidraol DVC
5101522324668
100150220320
5101522324668
100150220320
90909595
1001009592939290
High quality mineral hydraulic oils. Due to very good fi lterability properties, these oils are especially suitable for sensitive hydraulic systems with fi ne fi lters, servo units and numerically controlled machine tools, as well as for similar purposed where higher working temperatures are achieved. They can be used in pumps that contain parts made of colored metal alloys. Completely meet the very strict requirements of ISO 6743/4 HM, ISO 11158 HM, DIN 51524/Teil 2 HLP, EATON (Vickers) I-286-S and EATON (Vickers) M-2950-S. Placed on lists Parker Haniffin-Denison HF-0, HF-1, HF-2 (ISO VG 32, 46 and 68) and Cincinnati Machine P-68 (ISO VG 32), P-69 (ISO VG 68) and P-70 (ISO VG 46).
INA Hidraol HD
22324668
100150220320
22324668
100150220320
951001009592929292
Hydraulic mineral-based oils whose level of quality corresponds to ISO 6743/4 HM, ISO 11158 HM and DIN 51524/Teil 2 HLP. Serve for fi lling the hydraulic systems of cranes, presses, machine tools and other machines. Suitable for lubrication of gear, vane and sucker rod pumps. Higher viscosity grades are used for lubrication of transmissions and bearings in textile industry.
INA Hidraol HDS
1522324668
1522324668
133152155153135
A range of high quality mineral hydraulic oils with high viscosity index and very good low temperature properties for hydraulic systems exposed to very low temperatures or where strong temperature fl uctuations occur, for instance precise and programmed machines, valve bore sealing mechanisms in dams, construction or agricultural machines, machines in boats etc. Meet the very strict requirements of ISO 6743/4 HV, ISO 11158 HV, Parker Haniffin- Denison HF-2 and HF-0, DIN 51524/Teil 3 HVLP and EATON (Vickers) M-2950-S.
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
32
B
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
ViscosityIndex General Description – Applications – Performance Levels – Specifi cations
INA Biohidraol HEES 46 46 180
Biodegradable hydraulic fl uid based on synthetic esters. Serves for application in industry, construction, transport and for all hydraulic systems operating outdoors and in places where there is a risk of leakage and environment pollution. Enables operating at a temperature range from -30 to 100 °C.Completely meets the requirement of the specifi cation VDMA 24568 type HEES and ISO 15380, HEES. Possesses the water permit.
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/spH Value General Description – Applications – Performance Levels – Specifi cations
INA Hidrafl uid HFC 46 46 9,8Fire resistant water/glycol type (HFC) hydraulic fl uids. It is recommended for use in places where there is a major risk of fi re. Meets the specifi cations ISO 6743/4 HFC, ISO 12922 and 7th Luxembourg report.
2 biodegradable hydraulic fl uids
3 fi re-resistant hydraulic fl uids
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
B
33
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
Viscosity Index General Description – Applications – Performance Levels – Specifi cations
INA Polar HG3268
3268
9595
High quality oils for slideway lubrication. Specially recommended for combined hydraulic system slideway lubrication in machine tools. Meet the requirements of ISO 6743/4 HG, ISO 11158 HG. ISO VG 68 grade placed on the Cincinnati Machine P-47 list.
INA Polar G150220
150220
9393
Oils intended for lubrication of heavily loaded slideway, especially for vertical lubrication, where faster fl owing of oil is possible. INA Polar G 220 is especially recommended for slideway lubrication in heavy duty machine tools such as, for instance, coordinate drills, carousel machining machines, horizontal planing machines, gaters. Meet the requirements of ISO 6743/13 L-G and ISO 19378 G-A. ISO VG 220 grade placed on the Cincinnati Machine P-50 list..
4 hydraulics and slideway oils
5 circulating oils
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
PourPoint °C General Description – Applications – Performance Levels – Specifi cations
INA Cirkol 2 2,1 -38
Quality mineral oil containing additives against oxidation, foaming and corrosion. Serves for lubrication of spindles and low clearance high-speed bearings in high speed grinding and other machines. Meets the requirements of ISO 6743-2 L-FC.
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
34
B
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
PourPoint °C General Description – Applications – Performance Levels – Specifi cations
INA Cirkol
100150220320460680800
1000
100150220320460680800940
-15-15-10-10-10-8-6-3
Quality mineral oils containing additives against oxidation and corrosion. Serve for lubrication by the circulation system, oil splash or oil mist systems, roll bearings and gear transmissions that are not heavily loaded and are without shock load. Meet the requirements of ISO 6743/4 HL, ISO 12925-1 and ISO 6743/6 L-CKB. INA Cirkol 100 and 150 meet the ISO 11158 HL specifi cation.Recommended for gear fl ank pressures up to 500 N/mm2.
INA Cirkol ML 460 460 -7
Special mineral oil with excellent property of water separation for lubrication, intended for lubrication of Morgoil roll-neck bearings, gear transmission, centrifugal pumps and air compressors in mills. Meets the requirements of ISO 6743/4 HH.
INA Cirkol 100 ZINA Cirkol 150 Z
100150
100150
-22-21
Quality mineral oils for lubrication of gears operating under moderate loads at medium and high speed. Specially recommended for railway sliding bearings in winter exploitation conditions. Meet the requirements of ISO 6743/4 HL and ISO 11158 HL.
6 lubricants for enclosed industrial gears
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
PourPoint °C General Description – Applications – Performance Levels – Specifi cations
INA Epol SPS
150220320460680
150220320460680
<-40<-40
-35-30-26
Synthetic oils based on polyalphaolefi n and EP additives for lubrication of enclosed industrial gears that are exposed to high loads and high temperature during operation. Provide optimal protection of equipment and an extended drain period. Working temperature up to 120 °C, and over a brief period up to 150 °C. Meet the requirements of specifi cations ISO 6743-6 L-CKD, ISO 12925-1, DIN 51517 Part 3 CLP, ANSI/AGMA 9005-E02, AISE/US Steel 224.
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
B
35
INA Code NLGI number
Kinematic Viscosity of
base stock at 40 °C, mm2/s
DroppingPoint °C, min General Description – Applications – Performance Levels – Specifi cations
INA Viskoma R00
0195195
165170
Mineral based lithium EP greases for lubrication of smaller enclosed gear transmissions, gearboxes in rail, tram, construction and agricultural vehicles. Recommended for use at gear fl ank loads up to 500 N/mm2.Classifi ed as ISO 6743/6 CKG. NLGI number 00 meets the ISO L-XCCEB 00 an DIN 51826 GP 00 K -30. NLGI number 0 classifi ed as ISO L-XCCEB 0 and DIN 51826 GP 0 K -30.
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
PourPoint °C General Description – Applications – Performance Levels – Specifi cations
INA Epol SP
68100150220320460680800
1000
68100150220320460680800940
-22-20-20-20-20-15-10-6-6
High quality EP mineral oils intended for lubrication of enclosed gears, bearings, machines and other industrial devices with heavy duty and shock loads. May be used in circulation systems and systems with oil mist. Temperature application area up to 100 °C. Meet the requirements of specifi cations ISO 6743/6 CKC, ISO 12925, US Steel 224, AGMA 9005-E02 and DIN 51517/Teil 3 CLP. Placed on Cincinnati Machine P-77 (VG 150), P-74 (VG 220) and P-59 (VG 320) lists.
INA Hipenol GTL 140 460 462 -8
High quality EP oil suitable for use in conditions and working temperatures ranging from 100 up to 120 °C. Can be used for spiral-tapered transmissions and other transmissions and as hypoid oil for fi rst factory fi lling. Meets the requirements of SAE 140, API GL-5 and ISO 6743/6 CKD.
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
36
B
7 open gear and wire cable lubricants
INA CodeKinematic
Viscosity at 100 °C, mm2/s
Penetration at 25 °C, 0,1 mm General Description – Applications – Performance Levels – Specifi cations
INA Viskol 10**INA Viskol 15**INA Viskol 20**INA Viskol 40**INA Viskol Fluid 40**
75,0125,0
––
58,0
––
325300
–
Bitumen based lubricants of high viscosity and high adhesiveness intended for discontinuous lubrication of open cylindrical or slanted gears, chains and wire cables, at low speeds and medium loads up to 500 N/mm2 and a working temperature range from 70 to 100 °C. by immersion or mechanically. Recommended for lubrication in construction, mining on elevators, cranes, cable cars, for power gear transmissions of wheel sets in rail vehicles and in boats. INA Viskol Fluid 40 contains a solvent for easier application on the lubrication spot, so it is not necessary to heat it before use. Meet the requirements of ISO 6743-6 L-CKJ.
INA Code NLGInumber
Kinematic Viscosity of
Base Stock at 40 °C, mm2/s
DroppingPoint °C, min General Description – Applications – Performance Levels – Specifi cations
INA Grafl oscon B SG 00 Ultra
00 500 105
Semi-liquid aluminum mineral based EP grease with the addition of colloidal graphite and special additives. Free from bitumen, heavy metals, chlorine and solvents. Used for running-in of open gear transmissions, especially in cement industry. It reduces surface roughness and improves tooth fl ank quality. Besides this, it is also applied in corrective lubrication if tooth fl anks are damaged. It is easily applied by automatic spraying devices at a temperature range from -15 to 90 °C. Application temperatures range from -30 to 200 °C. Classifi ed as ISO L-XCGEB 00 and DIN 51502 OGPF 00 S -30.
INA Grafl oscon C SG 0 Ultra
0 680 105
Aluminum mineral based EP lubricating greased with the addition of colloidal graphite and special additives. Free from bitumen, heavy metals, chlorine and solvents. Used for lubrication of open gear transmissions, and especially in the cement industry. It can be used for lubrication of guides of large sprockets, wire cables etc. It is easily applied by automatic spraying devices at a temperatures range from 0 to 90 °C. Application temperatures range from -30 to 200 °C. Classifi ed as ISO L-XCGEB 0 and DIN 51502 OGPF 0 S -30.
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
B
37
INA Code NLGInumber
Kinematic Viscosity of
Base Stock at 40 °C, mm2/s
DroppingPoint °C, min General Description – Applications – Performance Levels – Specifi cations
INA Viskoma G*** 1 140 185
Lithium lubricating grease based on mineral base oil, colloidal graphite and special additives. Serves for lubrication of open, semi-open and chain transmissions, steel cables for lifts, cranes and cable cars.Meets the requirements of ISO 6743/6 CKM. Classifi ed as ISO L-XCCHB 1 and DIN 51825 KPF 1 K -30.
8 chain lubricants
INA CodeKinematic
Viscosity at 40 °C, mm2/s
Viscosity Index General Description – Applications – Performance Levels – Specifi cations
INA Lancol Temp Plus
320 110Synthetic high-temperature oil for lubrication of chains in textile machine drying and thermo-fi xing units, chains in the wood processing industry, facilities for paint-spraying and processing of rubber and plastic. Application temperatures range from -20 to 250 °C.
INA Biolancol 86 235Biologically fast degradable plant-based oil specially developed for chain lubrication of chainsaws with automatic lubricant feed systems. Possesses the water permit.
INA Lancol ST 200 110 95Mineral lubricating oil for chain lubrication of motor-powered and electric saws. Specially recommended for chain lubrication of STIHL chainsaws.
*** Sales While Supplies Last
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
38
B
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
Viscosity Index General Description – Applications – Performance Levels – Specifi cations
INA Teksol 32 32 95
Mineral based textile machinery lubricating oil, easily washable from cloth or yarn. Good adhesiveness ensures non-drop properties to eliminate staining of the knitted material. Recommended for lubrication of different types of knitting machines. May be used in weaving machines for lubrication of grapples, levers and handles.
INA Teksol M 22 20 92Washable textile machinery lubricating oil made from paraffi n white oil. Recommended for application in weaving machines for lubrication of grapples, levers and handles.
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
Viscosity Index General Description – Applications – Performance Levels – Specifi cations
INA Turbo324668
324668
989492
High quality turbine mineral oil intended for bearing lubrication of steam, gas and water turbines. It is also used as hydraulic fl uid in turbine regulating systems, gear transmissions and circulatory lubrication of different machines. Meets the requirements of: DIN 51515-1, BS 489, ISO 8068, ASTM4304 type I, Alstom HTGD 90117, Siemens TLV 901304/01, GeneralElectric GEK 32568f, General Electric GEK 101941A.
9 textile machinery oils
10 turbine oils
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
B
39
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
ViscosityIndex General Description – Applications – Performance Levels – Specifi cations
INA Komprina
324668
100150220320
324668
100150220320
96959492919089
Quality compressor mineral oil for lubrication of reciprocating and rotary air compressors and vane and vacuum pumps for a wide range of working temperatures and loads.Meets the requirements of DIN 51506-VDL (VG 46, 68, 100), DIN 51506-VCL (VG 150), DIN 51506-VBL (VG 220, 320) specifi cations.Passes the 10th FZG test load stage.
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
PourPoint, °C General Description – Applications – Performance Levels – Specifi cations
INA VIK 46 44 -40
Mineral oil for screw compressors with good oxidation and thermo stability and good detergent-dispersant properties, provides protection against corrosion. Withstands heavy loads and high temperatures.Oil drain period is one year or 4000 working hours. It is manufactured in accordance with the internal standard INA N 22-145.
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
ViscosityIndex General Description – Applications – Performance Levels – Specifi cations
INA Fungia4668
100
4668
100
373635
Naphthenic mineral oil with very low pour point, primarily intended for lubrication of reciprocating and rotary refrigerator compressors, where oil is exposed to ammonia as refrigerating substance, in moderate volatility temperature area. Possible application even in refrigeration compressors where halogenated hydrocarbons are used as refrigerating substances. Meets the requirements of DIN 51503-1-KAA, BS 2626 and ISO L-DRA specifi cations.
11 air compressor oils
12 refrigeration compressor oils
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
40
B
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
Kinematic Viscosity at
100 °C, mm2/sGeneral Description – Applications – Performance Levels – Specifi cations
INA Polar46
100150
46100150
7,011,014,0
INA Polar 46 is recommended for lubrication of pneumatic tools and engines operating at ambient working temperatures below 5 °C, and INA Polar 100 is recommended for lubrication of heavily loaded rock drills and tools operating at a temperature range from 5 to 27 °C. INA Polar 150 is intended for lubrication of heavily loaded pneumatic machines and tools operating at temperatures below 27 °C. The oils meet the requirements of ISO 6743/11 L-PAC and L-PBC.
13 pneumatic tool oils
14 heat transfer oils
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
Flash Point,(COC), °C General Description – Applications – Performance Levels – Specifi cations
INA Termanol VT 32 32 210Mineral oil with high thermal and oxidation stability. Used as a heat transfer medium in closed systems at constant working temperatures up to 320 °C.Meets the requirements of ISO 6743/12 and DIN 51522.
INA Termanol 32 32 220
Mineral oil with good thermal and oxidation stability intended for heat transfer in systems in road laying machinery, dryers and in chemical, wood processing and textile industry and similar closed systems up to 280 °C. Meets the requirements of ISO 6743/12 and DIN 51522.
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
B
41
INA Code
Točka smrzavanja
Progliterma i vode (1:1) °C
Vrelište °C General Description – Applications – Performance Levels – Specifi cations
INA Progliterm -35 165
Synthetic fl uid for heat transfer and long-term protection from corrosion based on 1,2 propylene-glycol which is less harmful to people and environment. It is recommended for application in industrial cooling-heating systems, solar heating systems, for building central heating systems, sports court central heating systems etc. Can be used in closed systems for heat transfer in food industry where there is no possibility of contact with food or drink. Before use, the concentrate must be diluted with water.
INA Progliterm Plus -35 165
Biodegradable synthetic liquid for heat transfer and long-term protection against corrosion, based on 1.2-propylene glycol which is non-toxic to humans. Recommended for heating-cooling systems primarily in the food industry, such as breweries, the meat industry, cold-storages, but also for solar heating systems, central heating systems of buildings, sports grounds and all systems which may come into contact with sanitary water. The concentrate should be diluted with water before use.
INA CodeKinematic
Viscosity at 40 °C, mm2/s
PourPoint °C General Description – Applications – Performance Levels – Specifi cations
INA Trafi na 3000 9,0 -50
Highest quality special mineral based oil for electric insulation suitable for operation of all types and sizes of transformers, and it is especially recommended for severe duty tension selectors in electric locomotive transformers.Anticorrosive protection in accordance with the newest requirements.Meets the special criteria for special application from the IEC 60296:2012 standard.
INA Trafo ulje 296 X 9,1 -48Oil for electric insulation used in transformers with voltage up to 110 kV. Meets the requirements of IEC-60296:2012.
15 electric insulating oils and cable compounds
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
42
B
INA Code Penetration at 25 °C, 0,1 mm
Dropping Point, °C General Description – Applications – Performance Levels – Specifi cations
INA SMK 70*** 30–120 70–75INA SMK 70 is a mass intended for fi lling and protection of telephone cables. Outstanding adhesiveness, resistance to humidity and water, electrically insulating and neutral to materials in cables (copper, aluminum) and polyethylene insulation. Bears the “Croatian Quality” mark.
*** Sale While Supplies Last
16 process oils
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
Kinematic Viscosity at
100 °C, mm2/sGeneral Description – Applications – Performance Levels – Specifi cations
INA Gumanol 460 460 31,0Mineral based process oil, mostly paraffi n-based, used in the rubber and cable manufacturing industry for softening during the manufacturing of special types of natural rubber.
INA Procesno ulje N 12
– 11 –Naphthenic base process oil for application in glass manufacturing for coating molds while manufacturing glass products. Can be used for other kinds of applications that require a naphthenic base process oil of low viscosity.
INA CodeKinematic
Viscosity at 100 °C, mm2/s
Flash Point (COC), °C General Description – Applications – Performance Levels – Specifi cations
INA Izol TZ 170** 170 280Mineral-based oil used for insulation, with the addition of polymer components for fi lling of electric cable heads and connectors.
NAPOMENA: INA Maziva d.o.o. proizvode i ostale tipove procesnih ulja koja nisu navedena u ovom katalogu. U slučaju da imete potrebu za drugim tipovima procesnih ulja
molimo Vas da kontaktirate tehnički servis INA Maziva.
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
B
43
INA Code pH ValueEvaporation
Loss at 140 °C, 1 h mass. %
General Description – Applications – Performance Levels – Specifi cations
INA TLV 1-416*** 8,0–9,0 90,0Mixed with water in ratio from 1: 50 to 1:70. Made from waxes, emulsifi ers and special additives for protection against corrosion and improvement of die-casting of aluminum alloys, at die mould temperatures of 180 to 360 °C.
INA Code Penetration at 25 °C, 0,1 mm General Description – Applications – Performance Levels – Specifi cations
INA TLK 953 G*** 130–170Special lubricating grease compounded with mineral oils, waxes and graphite. It is applied by hand as special piston lubricant for horizontal and vertical die-casting machines.
17 lubricants for die-casting of metals
18 other industrial oils
INA CodeKinematic
Viscosity at 20 °C, mm2/s
Kinematic Viscosity at
40 °C, mm2/s
Flash Point (PM), °C General Description – Applications – Performance Levels – Specifi cations
INA Kalibrol C 2,7 80Mineral oil of narrow viscosity range for diesel injector calibration and as engine running-in fuels in accordance with ISO 4113.
INA Kalibrol B 6,9 98Mineral oil of narrow viscosity range for Bosch diesel injector system calibration and as engine running-in fuels.
*** Sale While Supplies Last
lub
rica
nts
and
re
late
d p
rod
ucts
fo
r in
dustr
ial use
44
B
INA CodeKinematic
Viscosity at 40 °C, mm2/s
Flash Point (COC), °C General Description – Applications – Performance Levels – Specifi cations
INA Instrumentol 21,0 190
Highest quality high paraffi nic oil with additives. Widely used in industry, intended for lubrication of all kinds of measuring and other precise instruments, household appliances, sewing machines, and offi ce appliances. Can be used in the textile industry for knitting and sewing machines in places where special washing properties are not specifi ed.
INA Oplatol 16 16,0 190Oil used to facilitate concrete separation from the moulds in the building industry. Suitable for steel and water resistant plywood plates.
INA Oplatol 5 4,5 115Oil used to facilitate concrete separation from the moulds in the building industry. Suitable for steel and water resistant plywood plates. Due to low viscosity it can be applied with a brush and hand sprayers.
INA Biofi l C 40 40,0 270
Biodegradable emulsifi able fl uid for lubrication and cooling used in places where the lubricant may come into contact with the environment. It is used for lubrication and cooling of large wood-cutting saws (gaters), and may also be used for spraying rollers, metal surfaces and other parts which come into contact with asphalt. In the glass industry scissors used for cutting and shaping glass objects may be lubricated. It is delivered as a concentrate, when mixed with water it creates a stabile milk emulsion in the ratio from 3 to 50% depending on the areas of application.
metalworking oils
and fl uidsC
C
me
talw
ork
ing
oils
and
fl u
ids
47
C
INA CodeKinematic
Viscosity at 40 °C, mm2/s
Copper Corrosion at 100 °C, 3 h
General Description – Applications – Performance Levels – Specifi cations
INA Rezanol NMH 5 BKK 5 1 bMineral inactive neat cutting oil containing fatty components for honing operations on iron and yellow metals and other machining requiring a very low viscosity cutting oil. Classifi ed as ISO 6743/7 L-MHC, DIN 51385 SN.
INA Rezanol N 30 BKK 30 1 bSpecial formulation, universal mineral paraffi n-based inactive neat cutting oil for painted metal cutting operations with machine tool gear and bearing lubrication, can be used simultaneously as a hydraulic fl uid. Classifi ed as ISO 6743/7 L-MHC, DIN 51385 SN.
INA Rezanol NM 22 BKK**
22 1 b
Mineral inactive neat cutting oil with a higher fatty component content. Used for cutting low-hardness steels and yellow metals which tend to produce built up edges on cutting tools and where a special quality surface fi nish is required. Classifi ed as ISO 6743/7 L-MHC, DIN 51385 SN.
INA Rezanol NEP 20 BKKINA Rezanol NEP 40 BKK
2040
1 b1 b
Mineral inactive neat cutting oils for operation in machines occasionally cutting steels of low to medium hardness and yellow metals. Suitable for thread cutting, automatics and gear cutting, especially when high quality fi nished surface is required. The application of INA Rezanol NEP 20 BKK guarantees great results with hobbing and fi nal milling of gears in machines manufactured by Gleason, Konvoid and Reishouer. Classifi ed as ISO 6743/7 L-MHC, DIN 51385 SN.
INA Rezanol NMS 37 BKK**
37 1 b
Mineral inactive neat cutting oil containing a higher fatty component and additive content for cutting yellow metals. Used for profi le grinding of tool and high-speed and stainless steels, for profi le grinding and grinding gears in Reishauer grinders. Classifi ed as ISO 6743/7 L-MHE, DIN 51385 SN.
1 neat metalworking oils
me
talw
ork
ing
oils
and
fl u
ids
48
C
INA CodeKinematic
Viscosity at 40 °C, mm2/s
Copper Corrosion at 100 °C, 3 h
General Description – Applications – Performance Levels – Specifi cations
INA Rezanol NMP 15 BKK**
15 1 b
Inactive greased multipurpose cutting oil for machining yellow metals and carbon and low-carbon steels. Especially suitable for yellow metal machining on automatics, deep drilling, machining, and thread rolling. Particularly recommended for small parts machining demanding very high surface fi nish such as writing instruments manufacture. Classifi ed as ISO 6743/7 L-MHE, DIN 51385 SN.
INA Rezanol NMP HD 32 BKK
32 1 b
Highly effi cient oil for medium and heavy duty conditions and tough metals. Especially recommended for application on automatics because it lubricates the entire machine, including hydraulic systems, besides having good machining properties. Classifi ed as SO 6743/7 L-MHE, DIN 51385 SN, DIN 51524/2 HLP.
INA Rezanol AMS 10 BKKINA Rezanol AMS 20 BKK
1020
4 c4 c
Mineral active oils with special additives and an increased fatty component content for deep drilling, profi le grinding, fi nal machining of steel and cast metal where lower viscosity is required. Classifi ed as ISO 6743/7 L-MHF, DIN 51385 SN.
INA Rezanol A HD 17 BKK
17 4 c
Highly effi cient oil for broaching and deep drilling of alloyed steels of lowest machinability. It is also applied for threading and thread rolling, gear machining, cold forging as well as for other demanding machining procedures. It is also suitable for cutting operations using the minimal lubrication procedure (MQL). Classifi ed as ISO 6743/7 L-MHF, DIN 51385 SN.
INA Rezanol A HD 43 BKK
43 4 cHighly effi cient oil for broaching and thread cutting on alloyed steels with lowest machinability. Suitable for drawing, stamping and cold forging operations. Classifi ed as ISO 6743/7 L-MHF, DIN 51385 SN.
INA Rezanol AM HD 28 BKK**
28 4 cMineral based highly effi cient active oil for broaching, threading and thread rolling, gear machining as well as for other operations in machining steels of low machinability. Classifi ed as ISO 6743/7 L-MHF, DIN 51385 SN.
INA Rezanol AMP HD 33 BKK
33 3 aHighly effi cient oil for high speed heavy duty broaching during the machining of steels with low machinability and for operations of steel punching and machining stainless steels. Classifi ed as ISO 6743/7 L-MHF, DIN 51385 SN.
me
talw
ork
ing
oils
and
fl u
ids
C
49
INA Code pH Value 5% Emulsion/Solution
Cast Iron Corrosion of 2% Emulsion/Solution General Description – Applications – Performance Levels – Specifi cations
INA Sint B 8,0 –9,0 0/0–0/
EP synthetic fl uid for cooling and lubrication in machining, hobbing, thread cutting, deep drilling, broaching, drawing and profi le grinding of low machinability iron, yellow metals and other materials. It is also applied in cutting ingot and deforming, such as deep drawing of sheet, bending etc. Gives clear and stable solutions. Possesses the water permit. Classifi ed as ISO 6743/7 L-MAH, DIN 51385 SES.
3 water-miscible metalworking fl uids
2 metal forming lubricants
INA CodeKinematic
Viscosity at 40 °C, mm2/s
Copper Corrosion at 100 °C, 3 h
General Description – Applications – Performance Levels – Specifi cations
INA Rezanol AM 100 BKK
100 4 aHighly effi cient, multifunctional active oil for heavy duty steel machining using metal-forming operations on the basis of deforming and particle removal, such as cutting, thread rolling, profi le reducing, stamping, forging etc. Classifi ed as ISO 6743/7 L-MHF, DIN 51385 SN.
INA Rezanol AM HD 130 HK BKK
130 4 cHighly effi cient mineral oil for cold forging and rolling screws. It can be used for other heavy operations requiring high surface fi nish on tough low machinability steels. Classifi ed as ISO 6743/7 L-MHF, DIN 51385 SN.
INA Rezanol TCG** 1,7 1 b
Inactive oil used for machining yellow metals, primarily aluminum, by particle removal and deforming. It evaporates fast, so the surface remains shiny and dry, and there is no stickiness during blasting. It can be used for machining other materials, such as wood. Classifi ed as ISO 6743/7 L-MHB, DIN 51385 SN.
me
talw
ork
ing
oils
and
fl u
ids
50
C
INA Code pH Value 5% Emulsion/Solution
Cast Iron Corrosion of 2% Emulsion/Solution General Description – Applications – Performance Levels – Specifi cations
INA Sint A 8,0–9,0 0/0–0/
Synthetic fl uid for cooling, rinsing and lubrication in metalworking, primarily in grinding operations. Suitable for machining iron and yellow metals and other materials, such as ceramics, wood etc. Gives clear and stable solutions. Possesses the water permit.Classifi ed as ISO 6743/7 L-MAG, DIN 51385 SES.
INA Bioal E 8,5–9,5 0/0–0/
Semi-synthetic emulsifi able fl uid that gives a semi-transparent, biologically stable emulsion when mixed with water. Especially suitable for aluminum, aluminum alloy and yellow metal machining. Classifi ed as ISO 6743/7 L-MAE, ISO 6743/7 L-MAF, DIN 51385 SEM.
INA BU Biosint HSP 8,8–9,3 0/0–0/
Emulsifi able fl uid for machining metal at high speed and pressure. Creates biologically stable emulsions when mixed with water. Due to high stability and low foaming it is especially applicable in modern CNC machines, in high-speed operations, in cooling through tools as well as in conventional machining units. It is recommended for machining iron materials in different operations, from grinding to deep grinding, and it can also be applied in machining yellow metals. Classifi ed as ISO 6743/7 L MAF, DIN 51385 SEM.
INA BU 7 8,7–9,5 0/0–0/
Emulsifi able fl uid that creates a stable milky emulsion when mixed with water. Used in machining operations on the basis of particle removal as well as deforming, for machining steel, iron and yellow metals, in grinding, machining and in automatics. It can be applied as a hydraulic fl uid. Classifi ed as ISO 6743/7 L-MAB, DIN 51385 SEM.
C
51
me
talw
ork
ing
oils
and
fl u
ids
4 auxiliary metalworking products
INA CodeKinematic
Viscosity at 40 °C, mm2/s
Density at 20 °C, g/
cm³
pH Value General Description – Applications – Performance Levels – Specifi cations1%
solution3%
solution
INA BU Stabilizator – 1,150 10
Product used for eliminating excessive development of microorganisms in water-based fl uids used in metalworking. It is added to working solutions or emulsions in the concentration from 0.1 to 0.15%, depending on the level of pollution.It also prevents the development of odors, foaming, exhaustion of superfi cially active substances and corrosion.
INA PER – 1,062 7,5
Product intended for cleaning and disinfection of emulsion systems that is added to used-up solutions and emulsions 24 hours before emptying from the machining unit, in the concentration from 1–2%. Contains bactericides and highly active cleaning components.
INA Deemulzin 80,0 1,165 6,9
Product for splitting or breaking used, exhausted emulsions for metalworking to the oil and water phase. It is added in the concentration of 0.2 to 0.5%, depending on the condition of the emulsion. It signifi cantly facilitates the procedure of eliminating used and exhausted emulsions and reduces harmful effects to the environment.
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
Flash Point (COC), °C General Description – Applications – Performance Levels – Specifi cations
INA Kalenol
223268
100
223268
100
180220240250
High-quality, widely used mineral oils with very good oxidation stability.Used for quenching of tools and construction parts from non-alloy and low-alloy steels. Classifi ed as ISO 6743/14 L-UH, DIN 51385 SN.
5 heat treatment oils
C
me
talw
ork
ing
oils
and
fl u
ids
52
INA CodeKinematic
Viscosity at 20 °C, mm2/s
Flash Point (PM), °C General Description – Applications – Performance Levels – Specifi cations
INA Ulje za elektroeroziju 2**
1,7 75Very low viscosity, low volatility oil for fi nest spark-erosion metalworking operations demanding narrow tolerance and high surface fi nish. Recommended where good rinsing and low electrode wear is required. Classifi ed as ISO 6743/7 L-MHA, DIN 51385 SN.
INA Ulje za elektroeroziju 3
3,5 100
Universal oil – dielectric fl uid, with low volatility, used for spark-erosion metalworking operations. Electrical properties suitable for a wide range of applications in electric spark erosion, for fi ne and coarse erosion metalworking. Classifi ed as ISO 6743/7 L-MHA, DIN 51385 SN.
INA Ulje za elektroeroziju 7**
6,0 125Highest viscosity with lowest volatility electric spark erosion oil in comparison with other grades. Especially recommended for severe spark erosion metalworking where more removal is required during metalworking. Classifi ed as ISO 6743/7 L-MHA, DIN 51385 SN.
6 electric spark erosion oils
INA Code ISO Viscosity Grade
Kinematic Viscosity at
40 °C, mm2/s
Flash Point (COC), °C General Description – Applications – Performance Levels – Specifi cations
INA Kalenol S 22INA Kalenol S 32**INA Kalenol S 68**
223268
223268
180220240
Quenching oils rinsable with water. Applied during heat treatment of parts made from low-alloy steels and standard carbon non-alloy steels. Quenched objects are easily rinsed with water. Easily miscible with water, they are used for inductive quenching in the form of an emulsion. Classifi ed as ISO 6743/14 L-UH, DIN 51385 SEM.
temporary
corrosion
preventives
D
D
55
D
INA CodeKinematic
Viscosity at 40 °C, mm2/s
Protective Film Thickness, mm General Description – Applications – Performance Levels – Specifi cations
INA Antoksin** 32 0,005
Mineral based oil with water removal properties for temporary protection from corrosion of metal surfaces of parts, fi ne mechanisms, metal half-products (sheets, strips, profi les) and fi nished products (springs, pressings, screws etc.). It is applied by spraying, dipping or coating with a brush. The protective fi lm is oily. Indoor protection for up to 9 months, outdoor undercover protection up to 6 months.
INA CodeKinematic
Viscosity at 40 °C, mm2/s
Corrosion Protection Humidity Cabinet, days, min General Description – Applications – Performance Levels – Specifi cations
INA Asol U 37 30
Oil intended for lubrication and temporary protection from corrosion in all kinds of small arms and artillery arms and equipment. Possesses water removal properties and does not act aggressively in contact with yellow metals. Protection from corrosion in humid and salt water environment. Indoor protection for up to 12 months, outdoor undercover protection for up to 8 months.Meets the requirements of MIL-C-22235A. The protective fi lm is oily.
INA Asol S 6,4 7
Special small arms cleaner and temporary corrosion preventive for everyday hunting, infantry or artillery arms maintenance. Removes harmful gunpowder combustion products. Has water removal properties and fi ngerprint removing properties. Meets the requirements of MIL-PRF-372D and MIL-C-15074E specifi cations.
1 mineral oil based corrosion preventives
tem
po
rary
co
rro
sio
np
reve
ntive
s
56
INA CodeCorrosion Protection
Humidity Cabinet, days, min
Protective Film Thickness, μm General Description – Applications – Performance Levels – Specifi cations
INA Antoksin Aqua 10**INA Antoksin Aqua 15**INA Antoksin Aqua 20**
5
10
20
0,9
1,2
1,7
Water solution based fl uids for temporary protection of metal from corrosion, leaving a hydrophobic, very thin and slightly oily protective fi lm after water evaporates. Intended for protection of metal parts, coils, sheets and fi nished products in indoor storage. Especially suitable for protection of objects made from cold rolled steel, galvanized steel and aluminum. The protective fi lm dries fast and is removed easily using the usual diluted alkaline degreasers. Besides having good anticorrosive properties, they are not fl ammable, are less polluting and do not pose a threat to the health of people using them.
INA CodeCorrosion Protection Salt Water Cabinet,
days, min
Protective Film Thickness, mm General Description – Applications – Performance Levels – Specifi cations
INA Antoksin Fluid
M3**12 0,004
Mineral based temporary corrosion preventive fl uid with the additions of corrosion inhibitors and a petroleum solvent. Excellent property of removing water from the surface of the object. Recommended for protection of metal half-products and fi nished products in indoor storage. Type of protective fi lm: thin, oily, light brown, transparent. Indoor protection up to 12 months.Meets the requirements of the MIL-C-16173E, type 3 specifi cation.
tem
po
rary
co
rro
sio
np
reve
ntive
s
D
2 solvent containing corrosion preventives
3 water based products
technical cleaning
productsE
E
59
technic
al cle
anin
g p
rod
ucts
E
INA Code Density at 20 °C, g/cm3
pH Value, 10% solution General Description – Applications – Performance Levels – Specifi cations
INA Solven RAV 10 1,070 9,1For cold removal of oil and grease dirt from vehicles, sheets, pipelines and other parts during workshop works. Does not corrode steel, varnishes, sealants or glass surfaces. It is used diluted with water, depending on the level of pollution, up to 1:10 ratio.
INA Code Density at 20 °C, g/cm3
FlashPoint, °C General Description – Applications – Performance Levels – Specifi cations
INA Solven RAO 10 0,780 64For outside cleaning of tankers from oil fuel and bitumen, and for cold degreasing of engines, machines, tools and sheets. Does not corrode steel, varnishes and sealants. It is used undiluted.
INA Solven RAO 11 0,850 64
For cold cleaning of heavy pollution by mineral greases and bitumen, burnt and severely degraded substances on metal surfaces. Because it contains natural terpenes with excellent solvent properties and has proved to be a good substitute for products containing chlorinated hydrocarbons. Does not corrode steel. It is used undiluted and it is rinsed with water.
INA Solven ELO 10 0,780 64
For cleaning electro-motors, electrical circuits, switches and other electric equipment. It is used for degreasing sheets, stainless steel and other metal surfaces when the presence of water is not allowed and when faster evaporation and drying is required. It is also used in baths for degreasing. It is used undiluted and possesses the water permit.
1 petroleum solvent based products
2 water based products
60te
chnic
al cle
anin
g p
rod
ucts
INA Code Density at 20 °C, g/cm3
pH Value, 1% solution General Description – Applications – Performance Levels – Specifi cations
INA Solven RAV 11 1,230 1,7
Acid product for outside cleaning of rail wagons, trams and buses, containers and tankers, from organic and inorganic pollution. It is very effi cient in removing sediments dissolved in acids (carbonates, oxides, etc.). Does not corrode steel, varnishes, sealants not glass surfaces. Not suitable for surfaces sensitive to acids, such as natural stone, ceramics, etc. It is used diluted with water depending on the level of pollution, up to 1:10 ratio.
INA Solven RAV 13 1,120 12
Alkaline product for outside cleaning of rail wagons, buses, car engines, boat fuel tanks as well as fl oors polluted with degraded oil. Does not corrode steel, varnishes or sealants. Long-term action on glass and yellow metals is not recommended. It is used diluted with water depending on the level of pollution, up to 1:5 ratio.
INA Code Density at 20 °C, g/cm3 pH Value General Description – Applications – Performance Levels – Specifi cations
INA Solven RAV 14 1,080 9,1
For cold cleaning of organic pollution in combination with soot, pigments and bitumen. It is used for cleaning engine parts, sheets, industrial fl oors, building facades and outside facilities of petrol stations. Does not corrode metal surfaces, varnishes, seals, glass and other materials. It is used diluted with water depending on the level of pollution, up to 1:100 ratio.
E
INA Code Density at 20 °C, g/cm3
pH Value, 10% solution General Description – Applications – Performance Levels – Specifi cations
INA Solven TPV 10 1,080 10,5
For warm cleaning in industry and workshops, intended for cleaning processing equipment, heating oil tanks, engines, machines and as a substitute for chlorinated hydrocarbon baths. Does not corrode steel, varnishes or sealants. It is not suitable for metals that are not resistant to alkaline substances. It is used diluted with water depending on the level of pollution and work mode up to 1:50 ratio.
61
INA Code Density at 20 °C, g/cm3
pH Value, 1% solution General Description – Applications – Performance Levels – Specifi cations
INA Solven TPV 12 1,190 1,65
For removal of lime scale in pipelines and equipment. Does not corrode metal surfaces, steel or sealants. It is not suitable for acid sensitive surfaces such as natural stone, marble, ceramics etc. It is used undiluted or diluted with water depending on the amount of lime scale, up to 1:20 ratio.
E
technic
al cle
anin
g p
rod
ucts
62te
chnic
al cle
anin
g p
rod
ucts
E
automotive and industrial
lubricating greasesF
F
auto
mo
tive
and
ind
ustr
ial
lub
rica
ting
gre
ase
s
65
F
INA Code NLGI number
Kinematic Viscosity of
Base Stock at 40 °C, mm2/s
Dropping Point, °C General Description – Applications – Performance Levels – Specifi cations
INA LIS123
80115130
190195200
Lithium multipurpose mineral based greases. NLGI grade 1 is recommended for lubrication of small plain and rolling bearings at high speed and at working temperatures from -30 to 110 °C, for a brief period up to 120 °C. Classifi ed as ISO L-XCCHA 1 and DIN 51825 K 1 K -30. NLGI grade 2 is suitable for lubrication of medium plain and rolling bearings, joints, guides and other machine parts at medium and high speeds and at working temperatures from -30 to 120 °C. Classifi ed as ISO L-XCCHA 2 and DIN 51825 K 2 K -30. NLGI grade 3 is recommended for lubrication of large bearings at low speeds and at working temperatures from -20 to 130 °C.Classifi ed as ISO L-XBCHA 3 and DIN 51825 K 3 K -20.
INA EKS HD
0123
68686868
85909598
Calcium EP mineral based lubricating greases for lubrication of loaded rolling bearings, even in the presence of moisture and water. INA EKS HD 0 and HD 1 are recommended for application in automatic central systems because of good pumpability, Especially for thin plastic lines and similar systems in agricultural machinery. NLGI grades 0 and 1 can be applied from -30 to 60 °C and are classifi ed as ISO L-XCAEB 0 and DIN 51825 KP 0 C -30 (EKS HD 0) that is ISO L-XCAEB 1 and DIN 51 825 KP 1 C -30 (EKS HD 1). NLGI grade 2 can be applied from -30 to 65 °C and it is classifi ed as ISO L-XCAHB 2 and DIN 51825 KP 2 C -30. NLGI grade 3 can be applied from -20 to 70 °C. It is classifi ed as ISO L-XBAHB 3 and DIN 51825 KP 3 C -20.
1 lubricating greases for plain and rolling bearings
auto
mo
tive
and
ind
ustr
ial
lub
rica
ting
gre
ase
s66
F
INA Code NLGInumber
Kinematic Viscosity of
Base Stock at 40 °C, mm2/s
DroppingPoint, °C General Description – Applications – Performance Levels – Specifi cations
INA Lipleks S EP123
150150150
240248252
Lithium complex mineral based EP greases are suitable for plain and rolling bearings in machines and for agricultural, construction and mining machinery. They withstand heavy and shock loads, vibrations, and they are water resistant. INA Lipleks S EP 2 is especially suitable for long term lubrication of wheel bearings in road and railway vehicles. NLGI grade 1 can be applied from -30 to 120 °C and it is classifi ed as ISO L-XCCHB 1 and DIN 51825 KP 1 K -30. NLGI grade 2 can be applied from -30 to 130 °C, for a brief period up to 140 °C and it is classifi ed as ISO L-XCDHB 2 and DIN 51825 KP 2 N -30. NLGI grade 3 can be applied from -20 to 140 °C, for a brief period even up to 150 °C and it is classifi ed as ISO-XBDHB 3 and DIN 51825 KP 3 N -20.
INA LIS EP12
150150
190197
INA LIS EP 1 is a lithium EP lubricating grease suitable for lubrication of plain and rolling bearings working at lower temperatures. It is suitable for centralized chassis lubrication systems with long lines. It can be applied at working temperature areas from -30 to 110 °C, for a brief period up to 120 °C. Classifi ed as ISO-L-XCCHB 1 and DIN 51825 KP 1 K -30.INA LIS EP 2 is a lithium EP lubricating grease suitable for lubrication of all medium and large plain and rolling bearings exposed to heavy and shock loads at working temperatures from -30 to 120 °C.It is especially recommended for roller mill bearings, bearings in heavy industry plants, and for railway locomotive and wagon wheel roller bearing lubrication. Application approval: MB-Approval 267.0. Classifi ed as ISOL-XCCHB 2 and DIN 51825 KP 2 K -30.
2 lubricating greases for plain and rolling bearings operating at heavy duty conditions
auto
mo
tive
and
ind
ustr
ial
lub
rica
ting
gre
ase
s
F
67
INA Code NLGInumber
Kinematic Viscosity of
Base Stock at 40 °C, mm2/s
DroppingPoint, °C General Description – Applications – Performance Levels – Specifi cations
INA LIS EPM** 1 175 190
Lithium multipurpose lubricating grease containing oxidation inhibitors and an effi cient EP additive for increasing the load capability. Soft consistency grease, lubricates plain and rolling bearings. Suitable for centralized chassis lubrication systems with long lines. Depending on working conditions, it can be applied at working temperatures from -30 to 110 °C, for a brief period up to 120 °C.
INA LIS EP S 2 115 190
Lithium mineral based EP lubricating grease. Contains a component that improves adhesiveness and reduces water rinsing of the grease. Application temperature from -20 to 120 °C.Classifi ed as ISO L-XBCHB 2 and DIN 51825 KP 2 K -20.
INA LIS MOS EP 2 100 195
Lithium mineral based EP grease with the addition of MoS2. It is used for lubrication of all types of bearings, joints and slideways exposed to high shock loads and where more reliable lubrication is required. Application temperature from -25 to 130 °C, and for a brief period up to 150 °C.Classifi ed as ISO L-XCDHB 2 and DIN 51825 KPF 2 N -25.
INA Bentona MOS 1 500 –
Mineral based grease thickened with modifi ed clay with the addition of MoS2. Used for lubrication of plain and rolling bearings at higher loads and temperature up to 160 °C, and for low speed plain bearings up to 200 °C. Classifi ed as ISO L-XBEDA 1 and DIN 51825 KF 1 P -20.
INA GKS 3 68 102
Calcium mineral grease with colloid graphite for rolling bearings and joints of construction, agricultural and mining machines at lower speeds and higher pressures, for heavily worn out bearings, for elevator guides, chains, chain drives, wire cables and low-load gears.Application temperature range from -20 to 70 °C. Classifi ed as ISO L-XBAHA 3 i DIN 51825 KF 3 C -20.
auto
mo
tive
and
ind
ustr
ial
lub
rica
ting
gre
ase
s68
F
INA Code NLGI number
Kinematic Viscosity of
Base Stock at 40 °C, mm2/s
Dropping Point, °C General Description – Applications – Performance Levels – Specifi cations
INA LIS Sint EP 2 46 200Synthetic-base lithium EP grease for lubrication of instrument bearings and machines working at very low temperatures. Application temperature from -50 to 140 °C. Classifi ed as ISO L-XEDHB 2 and DIN 51825 KPHC 2 N -50.
INA LIS Vitem EP 2 510 260
Lithium complex high temperature adhesive EP grease, with a synthetic base, for lubrication of highly loaded plain and rolling bearings at temperatures ranging from -40 to 180 °C, for a brief period even up to 200 °C. Classifi ed as ISO L-XDFHB 2 and DIN 51825 KPHC 2 R -40.
INA Bapleks T 2 180 245
Barium complex mineral based EP grease used for lubrication of all types of bearings that come into contact with moisture, water or hot water. Ensures good protection from corrosion in salt water.Meets the requirements of Fiat 55590. Application temperature from -25 to 130 °C. Classifi ed as ISO L-XBCHB 2 and DIN 51825 KP 2 K -25.
auto
mo
tive
and
ind
ustr
ial
lub
rica
ting
gre
ase
s
F
69
INA Code NLGInumber
Kinematic Viscosity of
Base Stock at 40 °C, mm2/s
Dropping Point, °C General Description – Applications – Performance Levels – Specifi cations
INA LIS EP 00 00 46 175
Semi-fl uid adhesive lithium EP lubricating grease suitable for centralized chassis lubrication systems with long lines operating at high loads. Application temperatures range from -30 to 110 °C, for a brief period up to 120 °C.Classifi ed as ISO L-XCCEB 00 and DIN 51826 GP 00 K -30.
INA LIS CS EP 00 46 180
Semi-fl uid lithium EP greased based on synthetic substances. It is especially recommended for centralized chassis lubrication systems of Mercedes-Benz and Man commercial vehicles in the most severe winter conditions.Application approval: MB-Approval 264.0. Application temperatures range from -50 to 120 °C.Classifi ed as ISO L-XECEB 00 i DIN 51826 GPHC 00 K -50.
3 lubricating greases for centralized chassis lubrication systems
auto
mo
tive
and
ind
ustr
ial
lub
rica
ting
gre
ase
s70
F
INA Code NLGInumber
Kinematic Viscosity of
Base Stock at 40 °C, mm2/s
Dropping Point,°C General Description – Applications – Performance Levels – Specifi cations
INA Bioma EP** 002
60125
168200
Readily biodegradable lithium/calcium EP greases based on synthetic esters. Possess the water permit. NLGI grade 00 is especially recommended for railway wheel fl anges lubrication and for lubrication of railroad and tram switches, and applied in centralized lubricating systems in commercial vehicles and buses. Operating temperatures range from -40 to 110 °C, for a brief period up to 120 °C and meets the requirements of the ISO L-XECEB 00 and DIN 51825 KPE 00 M -40 classifi cations.NLGI grade 2 is recommended for railway wheel fl anges lubrication by static trackside lubricator in railway and tram traffi c, for watercraft, water turbines and water treatment systems, for earth moving and agricultural machinery Operating temperatures range from -30 to 120 °C and meets the requirements of the ISO L-XDCHB 2 and DIN 51825 KPE 2 M -30 classifi cations. Possesses the water permit. Both greases bear the environmental protection mark “Environmentally friendly.”
4 biodegradable lubricating greases
INA CodeKinematic Viscosity of Base Stock at 40 °C,
mm2/s
Flow Time at 20 °C (Ford), s General Description – Applications – Performance Levels – Specifi cations
INA Bioma EP L** 60 140Readily biodegradable completely liquid lithium/calcium EP grease based on synthetic esters. Specially developed for lubricating steel wire ropes of cableways.
auto
mo
tive
and
ind
ustr
ial
lub
rica
ting
gre
ase
s
F
71
INA CodeNeedle Penetration Dropping
Point, °C General Description – Applications – Performance Levels – Specifi cations°C 0,1 mm
INA Bazna klizna mast**
1621273238
16–2020–3030–40< 80
< 200
58–62
A mixture of micro-crystal waxes and raw paraffi n with the addition of brightstock base oil. Applied as a base coating for ship launching. Manufactured in accordance with the internal standard INA N 12-410.
INA Code NLGInumber
Kinematic Viscosity of
Base Stock at 40 °C, mm2/s
Dropping Point, °C General Description – Applications – Performance Levels – Specifi cations
INA Klizna mast** 3 68 100Calcium EP-lubricating mineral-based grease is used as a second coat to INA Bazna klizna mast on shipyard launching ways.
5 greases for shipyard launching ways
auto
mo
tive
and
ind
ustr
ial
lub
rica
ting
gre
ase
s72
F
other
productsG
auto
mo
tive
and
ind
ustr
ial
lub
rica
ting
gre
ase
s74
F
G
75
oth
er
pro
ducts
G
INA Code Total Hardness °nj Electrical Conductivity, μS/cm General Description – Applications – Performance Levels – Specifi cations
INA Destilirana voda < 0,1 < 8
Demineralized quality water for application in industry and in households. It is recommended for the preparation of antifreeze solutions, battery acid, photography chemicals, in air humidifi ers, irons and for other applications where quality distilled or demineralized water is required.
AdBlue ........................................ 27INA 2 taktol ST Plus ......................16INA 2T Scooter .............................15INA Actinia B 50 ...........................16INA Agrina 10W-30 ..................... 22INA Agrina 10W-40 ..................... 22INA Amortizol 377 ....................... 23INA Amortizol HPS Plus ............... 23INA Antifi riz ELC 40 ..................... 26INA Antifriz 40 ............................. 26INA Antifriz AL 40 ....................... 26INA Antifriz AL Super ................... 25INA Antifriz BS 40 ....................... 26INA Antifriz BS Super ................... 25INA Antifriz Super ........................ 25INA Antoksin 32 .......................... 55INA Antoksin Aqua 10 .................. 56INA Antoksin Aqua 15 .................. 56INA Antoksin Aqua 20.................. 56INA Antoksin Fluid M3 ................. 56INA Asol S ................................... 55INA Asol U ................................... 55INA ATF DX IID ............................ 20INA ATF DX III .............................. 20INA ATF Extra .............................. 20INA ATF Super ............................. 20INA ATF TASA ............................. 20INA Autoglas ............................... 27INA Autoglas E30 ........................ 27INA Bapleks T2 ........................... 68INA Bazna klizna mast .................71INA Bentona MOS 1..................... 67INA Bioal E .................................. 50INA Biofi l C 40 ............................. 44
INA Biohidraol HEES 46 ............... 32INA Biolancol ............................... 37INA Bioma EP 00 ......................... 70INA Bioma EP 2 ........................... 70INA Bioma EP L ........................... 70INA BU 7 ..................................... 50INA BU Biosint HSP ..................... 50INA BU Stabilizator .......................51INA Cirkol 100 ............................. 34INA Cirkol 100 Z .......................... 34INA Cirkol 1000 ........................... 34INA Cirkol 150 ............................. 34INA Cirkol 150 Z .......................... 34INA Cirkol 2 ................................. 33INA Cirkol 220 ............................. 34INA Cirkol 320 ............................. 34INA Cirkol 460 ............................ 34INA Cirkol 680............................. 34INA Cirkol 800............................. 34INA Cirkol ML 460 ....................... 34INA Deemulzin ..............................51INA Delta 5 15W-40 .....................12INA Delta 5 20W-50 .....................12INA Delta 5 Silver 15W-40 ............12INA Delta 5 Silver 20W-50 ............12INA Delta Sint 10W-40 .................12INA Delta Sint Diesel 10W-40 .......12INA Destilirana voda .................... 75INA EKS HD 0 .............................. 65INA EKS HD 1 .............................. 65INA EKS HD 2 .............................. 65INA EKS HD 3 .............................. 65INA Epol SP 100 .......................... 35INA Epol SP 1000 ........................ 35
INA Epol SP 150 .......................... 35INA Epol SP 220.......................... 35INA Epol SP 320 .......................... 35INA Epol SP 460 ......................... 35INA Epol SP 68 .............................19INA Epol SP 68 ............................ 35INA Epol SP 680 ......................... 35INA Epol SP 800 ......................... 35INA Epol SPS 150 ........................ 34INA Epol SPS 220 ....................... 34INA Epol SPS 320 ....................... 34INA Epol SPS 460 ....................... 34INA Epol SPS 680 ....................... 34INA Fluid V 32 ............................. 21INA Fungia 100 ........................... 39INA Fungia 46 ............................. 39INA Fungia 68 ............................. 39INA GKS 3 ................................... 67INA Gorgonela S 30 ......................17INA Gorgonela S 40 ......................17INA Gorgonela S 50 ......................17INA Gorgonela S 60 ......................17INA Grafl oscon B SG 00 Ultra ....... 36INA Grafl oscon C SG 0 Ultra ......... 36INA Gumanol 460 ........................ 42INA Hidrafl uid HFC ....................... 32INA Hidraol DVC 10 ..................... 31INA Hidraol DVC 100 ................... 31INA Hidraol DVC 15...................... 31INA Hidraol DVC 150 ................... 31INA Hidraol DVC 22 ..................... 23INA Hidraol DVC 22 ..................... 31INA Hidraol DVC 220 ................... 31INA Hidraol DVC 32 ..................... 31
INA Hidraol DVC 320 ................... 31INA Hidraol DVC 46 ..................... 31INA Hidraol DVC 5 ....................... 31INA Hidraol DVC 68 ..................... 31INA Hidraol HD 100 ..................... 31INA Hidraol HD 150 ..................... 31INA Hidraol HD 22 ....................... 31INA Hidraol HD 220 ..................... 31INA Hidraol HD 32 ....................... 31INA Hidraol HD 320 ..................... 31INA Hidraol HD 46 ....................... 31INA Hidraol HD 68 ....................... 31INA Hidraol HDS 15 ..................... 31INA Hidraol HDS 22 ..................... 31INA Hidraol HDS 32 ..................... 31INA Hidraol HDS 46 ..................... 31INA Hidraol HDS 68 ..................... 31INA Hidraol HVP 46 ......................24INA Hipenol GTL 140 ....................19INA Hipenol GTL 140 ................... 35INA Hipenol GTL 80W ...................19INA Hipenol GTL 80W-90 .............19INA Hipenol GTL 90 ......................19INA Hipenol GTL DB 90 ................18INA Hipenol GTL HD 80W-90 ........18INA Hipenol GTL HD 85W-140 ......18INA Hipenol GTL LS 90 .................19INA Hipenol SHD 75W-90 .............18INA Hipenol TDL 80W-80 .............18INA Instrumentol .......................... 44INA Izol TZ 170 ............................ 42INA Kalenol 100 ...........................51INA Kalenol 22 .............................51INA Kalenol 32 .............................51
index
INA Kalenol 68 .............................51INA Kalenol S 22 ......................... 52INA Kalenol S 32 ......................... 52INA Kalenol S 68 ......................... 52INA Kalibrol B .............................. 43INA Kalibrol C .............................. 43INA Kiperol 20 ..............................24INA Klizna mast ............................71INA Komprina 100 ....................... 39INA Komprina 150 ...................... 39INA Komprina 220 ....................... 39INA Komprina 32 ......................... 39INA Komprina 320 ....................... 39INA Komprina 46 ......................... 39INA Komprina 68 ......................... 39INA Lancol ST 200 ...................... 37INA Lancol Temp Plus .................. 37INA LHM+ ................................... 25INA Lipleks S EP 1 ....................... 66INA Lipleks S EP 2 ....................... 66INA Lipleks S EP 3 ....................... 66INA LIS 1 .................................... 65INA LIS 2 .................................... 65INA LIS 3 .................................... 65INA LIS CS EP 00 ........................ 69INA LIS EP 00 ............................. 69INA LIS EP 1 ............................... 66INA LIS EP 2 ............................... 66INA LIS EP S 2 ............................ 67INA LIS EPM 1............................. 67INA LIS MOS EP 2 ....................... 67INA LIS Sint EP 2 ......................... 68INA LIS Vitem EP 2 ...................... 68INA Lokomol HS 40 ......................15INA Millennium 5W-40 .................11INA Oplatol 16 ............................. 44INA Oplatol 5 ............................... 44INA Outboard Plus ........................15
INA PER .......................................51INA Pneumol ............................... 27INA Polar 100 .............................. 40INA Polar 150 .............................. 40INA Polar 46 ............................... 40INA Polar G 150 .......................... 33INA Polar G 220 .......................... 33INA Polar HG 32 .......................... 33INA Polar HG 68 .......................... 33INA Procesno ulje N 12 ................ 42INA Procesno ulje P 15 ................ 42INA Progliterm ..............................41INA Progliterm Plus .......................41INA Rezanol A HD 17 BKK ............ 48INA Rezanol A HD 43 BKK ........... 48INA Rezanol AM 100 BKK ............ 49INA Rezanol AM HD 130 HK BKK . 49INA Rezanol AM HD 28 BKK ........ 48INA Rezanol AMP HD 33 BKK ...... 48INA Rezanol AMS 10 BKK ............ 48INA Rezanol AMS 20 BKK ............ 48INA Rezanol N 30 BKK ..................47INA Rezanol NEP 20 BKK ..............47INA Rezanol NEP 40 BKK ..............47INA Rezanol NM 22 BKK ...............47INA Rezanol NMH 5 BKK ...............47INA Rezanol NMP 15 BKK ............ 48INA Rezanol NMP HD 32 BKK ...... 48INA Rezanol NMS 37 BKK .............47INA Rezanol TCG ......................... 49INA Rubella 30 .............................17INA Rubella 40 .............................17INA Rubella X 30 ..........................16INA Rubella X 40 ..........................16INA Sagartia 30 ............................17INA Sagartia 40 ............................17INA Sagartia S 30 .........................17INA Sagartia S 40 .........................17
INA Sint A ................................... 50INA Sint B ................................... 49INA SMK 70 ................................ 42INA Solven ELO 10 ...................... 59INA Solven RAO 10 ...................... 59INA Solven RAO 11 ...................... 59INA Solven RAV 10 ...................... 59INA Solven RAV 11 ...................... 60INA Solven RAV 13 ...................... 60INA Solven RAV 14 ...................... 60INA Solven TPV 10 ...................... 60INA Solven TPV 12 ...................... 61INA Star 5W-40 ...........................11INA Super 2000 10W-40 ..............13INA Super 2000 5W-30................13INA Super 2009 10W-40 ..............13INA Super 2009 5W-30................13INA Super 3 10W .........................14INA Super 3 15W-40 ....................14INA Super 3 20W-20 ....................14INA Super 3 30 ............................14INA Super 3 40 ............................14INA Super 3 50 ............................14INA Super 5 15W-40 ....................14INA Super 5 30 ............................14INA Super 5 40 ............................14INA Super Max 15W-40................14INA Super Turbo 15W-40 .............14INA Teksol 32 .............................. 38INA Teksol M 22 .......................... 38INA Termanol 32 ......................... 40INA Termanol VT 32 .................... 40INA TLK 953 G ............................ 43INA TLV 1-416............................. 43INA Trafi na 3000 ..........................41INA Trafo ulje 296X ......................41INA Transhidrol 10W-30 .............. 22INA Transhidrol 85 ....................... 23
INA Transhidrol JD 50 .................. 23INA Transhidrol ZF 20W-40 ......... 22INA Transmatik 10W .................... 21INA Transmatik 30 ....................... 21INA Transmol DB 80W ..................19INA Transmol HD 75W-80 ............19INA Transmol HD 80W-90 ............19INA Turbo 32 ............................... 38INA Turbo 46 ............................... 38INA Turbo 68 ............................... 38INA UKA 3 ....................................24INA UKA 4 ....................................24INA UKA 4+ .................................24INA UKA 5.1 .................................24INA Ultra Garden 4T......................16INA Ultra Sint 5W-30 ....................11INA Ultra Star FE 5W-30 ...............11INA Ulje za elektroeroziju 2........... 52INA Ulje za elektroeroziju 3........... 52INA Ulje za elektroeroziju 7........... 52INA Umol ZC 80W-90 ...................19INA VIK 46 .................................. 39INA Viskol 10 ............................... 36INA Viskol 15 ............................... 36INA Viskol 20 .............................. 36INA Viskol 40 .............................. 36INA Viskol Fluid 40 ...................... 36INA Viskoma G 1 ......................... 37INA Viskoma R 0 ......................... 35INA Viskoma R 00 ....................... 35INA Zimski Autoglas .................... 27
AUTHORISED DISTRIBUTOR / IMPORTER
INA MAZIVA Ltd.Member of INA GroupRadnička cesta 17510000 ZagrebRepublic of Croatia Headquarters: + 385 (0)1 2412 000 COMMERCIAL SECTORT + 385 (0)1 2412 260F + 385 (0)1 2404 097 TECHNICAL SERVICEST + 385 (0)1 2404 564F + 385 (0)1 2412 397
Top Related