standards update
I N D O N E S I A
STANDARDS APPROVED 1. SNI 01-6948.2-2003
Single action green tea roller - Part : Performance
2. SNI 01-5007.18-2003
Logs - Part 18: Industrial zed supplement teakwood logs
3. SNI 02-6949.1-2003
Green tea rotary drier - Part 1: Testing methods and procedure
4. SNI 01-5010.6-2003
Supporting in the forest and forestes field - Part 6: Blue strain on sawn timber and logs
5. SNI 01-5007.19-2003
Logs - Part 19: Hardwood logs 6. SNI 01-5006.13-2003
Forest plants - Part 13: Treatment of forest plan seeds through generative cultivation
7. SNI 04-6951.1-2003
Electrical test methodsfor electric cables - Part 1: Electrical tests for cables cords and wires for voltage up to and including 450/750 V
8. SNI 19-6964.2-2003
Seawater quality - Part 2: Mercury (Hg) testing methods with atomic absorbed spectrophotometry or mercury analyzer
9. SNI 19-6964.3-2003
Seawater quality - Part 3: Ammonia (NH3-N) testing methods with indophenol blue by way of spectrophotometry
10. SNI 19-6964.4-2003
Seawater quality - Part 1: Sulphides (S=) testing methods with methylen by way of spectrophotometry
11. SNI 04-6960-2003
Overhead lines - Requirements and test for spacers
12. SNI 04-6292.2.80-2003
Safety of householdand similar electrical appliances - Part 2-80: Particular requirements for fans
13. SNI 04-6292.2.8-2003 Safety of household and similar electrical appliances Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
14. SNI 04-6186.25-2003
Electrical relays - Part 25: Electromagnetic emission on protection apparatus on realys measurement
15. SNI 04-6292.2.2-2003
Household and similar appliances - safety - Part 2-2: Particular requirements for vacuum cleaners and water - suction cleaning appliances
16. SNI 04-6292.2.69-2003
Safety of electrical and similar electrical appliances - Part 2-69: particular requirements for wet and dry vacuum cleaning including power brus, for industrial and commercial use
17. SNI 19-6963-2003
Documentation - Spires titles on books and other publications
18. SNI 04-6957-2003
Circuit breakers for equipment 19. SNI 04-6959.1-2003
Lamp controlgear - Part 1: General and safety requierments
20. SNI 04-6951.3-2003
Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurement on lengths exruded power cable
21. SNI 04-6952.2-2003
Connecting devices - Safety requirements for screw-type and screw less-type calmping unit for electric copper conductors - Part 2: Particular requirements for conductors from 35 mm2 up to 300 mm2
22. SNI 04-6959.2.3-2003
Lamp controlgear - Part 2-3: Particular requirements fpr a.c. suplied electronic ballasts for flourescent lamps
23. SNI 02-1213-2003
Completeness criteria and test method of tractor-plough for agriculture
24. SNI 19-6964.1-2003 Seawater quality - Part 1: Nitrites testing methods with sulfanilamides by way of spectrofotometry
25. SNI 04-6951.2-2003
Electrical test methods for electrical cables - Part 2: Partial discharge tests
26. SNI 04-6950-2003
High voltages overhead lines and extra higher voltages overhead lines - Limititaion value for electrical electromagnetic fields
27. SNI 04-6956.1-2003
Residual current operated circuit - breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 1: General rules
28. SNI 04-6292.2.25-2003
Safety of household and similar electrical appliances - Part 2-25: Particular requiremetns for microwave ovens
29. SNI 02-6949.2-2003
Green tea rotary drier - Part 2: Performance
30. SNI 04-6292.2.60-2003
Safety of household and similar electrical appliances - Part 2.60: Particular requirements for whirpool bath
31. SNI 04-6954.1-2003
Power transformers - Part 1: General
32. SNI 04-6292.2.7-2003
Safety of household and similar electrical appliances - Part 2-7: Particular requirements for washing machines
33. SNI 04-6953-2003
Small scall hydraulic electric power generation
34. SNI 04-6955.1-2003
Insulation coordination for equipment within low voltage system - Part 1: Principles, requirements and tests
35. SNI 04-6958-2003
Electrical power usage for household appliances and similar - Energy save marking labels
ASEAN STANDARDS AND QUALITY BULLETIN -42-
standards update
36. SNI 01-6948.1-2003 Single action green tea roller - Part 1: Testing methods and procedure
37. SNI 04-6961-2003
Protection against electric shock - Common asphalts for installation and equipments
38. SNI 16-2723-2003
Latex condoms 39. SNI 01-6947-2003
Fresh passion fruits 40. SNI 04-0227-2003
Standard voltages 41. SNI 01-5008.14-2003
Processed woods products - Part 14: Mahony sawn timber for the use of general purposes
42. SNI 01-6232.1-2003
Breeds seeds of open polinated corn
43. SNI 01-6232.2-2003
Foundation seeds of open polinated corn (Zea mays)
44. SNI 01-6232.3-2003
Stock seeds of open polinated corn (zea mays)
45. SNI 01-6232.4-2003
Extension seeds of open polinated corn (zea mays)
46. SNI 01-6233.1-2003
Breeder seeds of rice seeds 47. SNI 01-6233.2-2003
Foundation seeds of rice seeds (oryza sativa)
48. SNI 01-6233.3-2003
Stock seeds of rice seeds (oryza sativa)
49. SNI 01-6945-2003
Fresh mushrooms 50. SNI 01-6946-2003
Fresh cavendish bananas 51. SNI 19-6962.1-2003
Information and Documentation - Record management - Part 1: General
52. SNI 19-6964.5-2003
Seawater quality - Part 5: Sulphates (SO4=) testing methods with gravimetric analysis
53. SNI 19-6964.6-2003 Seawater quality Part 6: Cyanides (CN-) testing methods with 4- phyridine acid carboxylic-pyrazolones by way of spectrophotometry
54. SNI 19-6964.7-2003
Seawater quality - Part 7: Nitrates (NO3-N) with cadmiun reduction by way of spectrophotometry
55. SNI 01-6233.4-2003
Extension seeds of rice seeds 56. SNI 01-6234.1-2003
Breeder seeds of soya (glicinemax)
57. SNI 01-6234.2-2003
Foundation seeds of soya (glicine max)
58. SNI 01-6234.3-2003
Stock seeds of soya (glicine max)
59. SNI 01-6234.4-2003
Extension seeds of soya (glycine max)
60. SNI 04-6292.2-41-2003
Safety ansimilar electric pumps 61. SNI 01-6944-2003
Hybrid corn (zea mays) seeds 62. SNI 01-5007.1-2003
Teakwood logs - Part 1
M A L A Y S I A
(June 2003 – January 2004)
APPROVED ON 30 JUNE 2003
New Malaysian Standards 1. MS 1587:2003
Microbiological examination of beverage and beverage products – The enumeration of micro-organisms (Colony count technique at 30°C)
2. MS 1588:2003
Microbiological examination of beverage and beverage products – The enumeration of coliforms (Most probable number technique)
3. MS 1589:2003
Microbiological examination of beverage and beverage products – The enumeration of yeast and moulds (Colony count technique at 25 °C)
4. MS 133: Part F10:2003
Methods of test for paints and varnishes: Part F10: Determination of resistance to cathodic disbonding of coatings for use in marine environments
5. MS 133: Part F11:2003
Methods of test for paints and varnishes: Part F11: Determination of resistance to cathodic disbonding of coatings for use in land-based buried structures
6. MS 133: Part F12:2003
Methods of test for paints and varnishes: Part F12: Determination of resistance to neutral salt spray (fog)
7. MS 133: Part F13:2003
Methods of test for paints and varnishes: Part F13: Determination of resistance to filiform corrosion on steel substrates
8. MS 133: Part F14:2003
Methods of test for paints and varnishes: Part F14: Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation
9. MS 133: Part F15:2003
ASEAN STANDARDS AND QUALITY BULLETIN -43-
standards update
Methods of test for paints and varnishes: Part F15: Determination of resistance to humidity (intermittent condensation)
10. MS 133: Part F16:2003
Methods of test for paints and varnishes: Part F16: Exposure of coatings to artificial weathering - Exposure to fluorescent UV and water
11. MS 133: Part F17:2003
Methods of test for paints and varnishes: Part F17: Determination of wet-scrub resistance and cleanability of coatings
12. MS 133: Part F18:2003
Methods of test for paints and varnishes: Part F18: Determination of resistance to corrosion under a wet (salt fog)/dry/humidity cycle
13. MS 1590:2003
Carbon dioxide extinguishing systems – Design and installation
14. MS ISO 1502:2003
ISO general purpose metric screw threads – Gauges and gauging
15. MS ISO 965-5:2003 ISO general purpose metric screw threads – Tolerances – Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position H before galvanizing
16. MS ISO 965-4:2003
ISO general purpose metric screw threads – Tolerances – Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
17. MS ISO 965-3:2003
ISO general purpose metric screw threads – Tolerances – Part 3: Deviations for constructional screw threads
18. MS ISO 14567:2003
Personal protective equipment for protection against falls from
a height - Single point anchor devices
19. MS ISO 10333-1:2003
Personal fall-arrest systems Part 1: Full-body harnesses
20. MS ISO 10333-2:2003 Personal fall-arrest systems Part 2: Lanyards and energy absorbers
21. MS ISO 10333-3:2003
Personal fall-arrest systems - Part 3: Self-retracting lifelines
22. MS ISO 4007:2003
Personal eye-protectors - Vocabulary
23. MS ISO 4849:2003
Personal eye-protectors – Specifications
24. MS ISO 4850:2003
Personal eye-protectors for welding and related techniques - Filters - Utilisation and transmittance requirements
25. MS ISO 4851:2003
Personal eye-protectors - Ultra-violet filters – Utilisation and transmittance requirements
26. MS ISO 4852:2003
Personal eye-protectors – Infra-red filters – Utilisation and transmittance requirements
27. MS ISO 4854:2003
Personal eye-protectors – Optical test methods
28. MS ISO 4855:2003
Personal eye–protectors – Non-optical test methods
29. MS ISO 4856:2003
Personal eye-protectors - Synoptic tables of requirements for oculars and eye-protectors
30. MS ISO 6161:2003
Personal eye–protectors – Filters and eye-protectors against laser radiation
31. MS 1398: Part 4:2003 Specification for mosquito electric vapourising liquid: Part 4: Method for the evaluation of biological efficacy – Peet grady chamber method
32. MS 1595: Part 1:2003
Maximum road speed limiter for land based motor vehicles: Part 1: Specification for perfo-rmance, installation and marking requirements
33. MS 1595: Part 2:2003 Maximum road speed limiter for land based motor vehicles: Part 2: Specification for system and component requirements
34. MS 1596:2003
Determination of concentration and mass flow of particulate matter in flue gas for stationary source emissions
35. MS ISO 186:2003
Paper and board – Sampling to determine average quality (Supersedes MS 9:1989)
36. MS ISO 2596:2003 Iron ores – Determination of hygroscopic moisture in analytical samples – Gravimetric and Karl Fischer methods
37. MS ISO 5446:2003
Ferromanganese – Specification and conditions of delivery (Supersedes MS 842:1983)
38. MS ISO 3713:2003
Ferroalloys – Sampling and preparation of samples – General rules (Supersedes MS 843:1983)
39. MS ISO 4552-1:2003
Ferroalloys - Sampling and sample preparation for chemical analysis – Part 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese (Supersedes MS 843:1983)
40. MS ISO 4159:2003 Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method
41. MS ISO 4158:2003
Ferrosilicon, ferrosilicomanganese and ferrosilicochromium – Determination of silicon content – Gravimetric method
42. MS ISO 740:2003
ASEAN STANDARDS AND QUALITY BULLETIN -44-
standards update
Sodium carbonate for industrial use – Determination of total soluble alkalinity – Titrimetric method
43. MS ISO 1552:2003 Liquid chlorine for industrial use – Method of sampling (for determining only the volumetric chlorine content)
44. MS ISO 2120:2003
Liquid chlorine for industrial use – Determination of the content of chlorine by volume in the vaporized product
45. MS ISO 2121:2003
Liquid chlorine for industrial use – Determination of water content – Gravimetric method
46. MS ISO 2831:2003
Sodium fluoride for industrial use – Determination of water-insoluble matter
47. MS ISO 2832:2003 Sodium fluoride for industrial use – Determination of moisture content
48. MS ISO 2833:2003
Sodium fluoride for industrial use – Determination of fluorine content – Modified Willard-Winter method
49. MS ISO 5993:2003
Sodium hydroxide for industrial use – Determination of mercury content – Flameless atomic absorption spectrometric method
50. MS ISO 11609:2003
Dentistry – Toothpastes – Requirements, test methods and marking
(Supersedes MS 527:1986) 51. MS ISO 11784:2003
Radio-frequency identification of animals – Code structure
52. MS ISO 11785:2003
Radio-frequency identification of animals – Technical concept
Revised Malaysian Standard 1. MS 1000:2003
Specification for soya bean milk and drink (First revision)
2. MS 1398: Part 1:2003
Specification for mosquito electric vapourising liquid: Part 1: Physical and chemical requirements (First revision)
3. MS 1398: Part 2:2003
Specification for mosquito electric vapourising liquid: Part 2: Method for the evaluation of biological efficacy – Glass chamber method (First revision)
4. MS 1398: Part 3:2003
Specification for mosquito electric vapourising liquid: Part 3: Method of the evaluation of biological efficacy – Glass cylinder method (First revision)
5. MS 23: Part 2:2003
Specification for mosquito coil: Part 2: Method for the evaluation of biological efficacy – Glass chamber method (Second revision)
6. MS 828:2003
Specification for rear marking plates for vehicles (First revision)
7. MS 1175:2003
Specification for seat belts for motor vehicles (Second revision)
8. MS 474: Part 1:2003
Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 1: Specific gravity (First revision)
(Supersedes MS 474:1976) 9. MS 474: Part 2:2003
Method of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 2: Rockwell hardness test (First revision)
(Supersedes MS 474:1976) 10. MS 595: Part 2:2003
Specification for safety-glass pane for motor vehicles: Part 2: Methods of test (Second revision)
Reconfirmed Malaysian Standard
1. MS 1403:1996
Specification for electricity generating sets – Portable (up to 5 kW)
2. MS 485: Part 4:1976
Glossary of packaging terms: Part 4: Paper and board packaging
3. MS 286:1975
Specification for kraft paper, wrapping (unbleached and untreated)
4. MS 1080:1987
Method of test for determination of total non-ionic detergent by Batch Technique.
Withdrawal of Malaysian Standard
1. MS 1000:1986
Specification for soya bean milk and drink
2. MS 9:1989
Method of sampling to determine average quality of paper and board (First revision)
3. MS 842:1983
Specification for ferromanganese
4. MS 843:1983
Method of sampling ferrosilicon and ferromanganese for determination of ferrosilicon and ferromanganese for determination of chemical composition
5. MS 527:1986 Specification for toothpaste 6. MS 474:1976
Methods of test for brake lining materials
APPROVED ON 28 JULY 2003
New Malaysian Standards 1. MS ISO 8302:2003
Thermal insulation – Determination of steady-state thermal resistance and related properties – Guarded hot plate apparatus
2. MS IEC 60115-1:2003
ASEAN STANDARDS AND QUALITY BULLETIN -45-
standards update
Fixed resistors for use in electronic equipment – Part 1: Generic specification
3. MS IEC 60062:2003
Marking codes for resistors and capacitors
4. MS 1291:2003
Single-use sterile rubber surgical gloves – Specification
5. MS 1155:2003
Single-use medical examination gloves – Specification
Revised Malaysian Standard 1. MS 522: Part 1:2003
Portland cement (Ordinary and rapid-hardening): Part 1: Specification (Second revision)
2. MS 113:2003
Natural latex rubber condoms – Requirements and test methods (Second revision) (ISO 4074:2002, MOD)
Confirmation of Malaysian Standard
1. MS ISO 10202: Part 1:1995
Financial transaction cards – Security architecture of financial transaction systems using integrated circuit cards: Part 1: Card life cycle
2. MS ISO 1208:1996
Information and documentation – Electronic manuscript preparation and mark up
3. MS ISO/IEC 2382-23:1996
IT – Vocabulary: Part 23: Text processing
4. MS ISO/IEC 8802-6:1996
IT – Telecommunication and information exchange between systems – Local and metropolitan area networks: Part 6: Distributed Queue Dual Bus (DQDB) access method and physical layer specifications
5. MS ISO/IEC 9637-1:1996
IT – Computer graphics – Interfacing techniques for dialogues with graphical devices (CGI) – Data stream
binding: Part 2: Character encoding
6. MS ISO/IEC 9637-2:1996
IT - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Data stream binding: Part 2: Binary encoding
7. MS ISO/IEC 9646-1:1996
IT – OSI - Conformance testing methodology and framework: Part 1: General concepts
8. MS ISO/IEC 9646-2:1996
IT - OSI - Conformance testing methodology and framework: Part 2: Abstract test suite specification
9. MS ISO/IEC 9646-4:1996
IT – OSI - Conformance testing methodology and framework: Part 4: Test realization
10. MS ISO/IEC 9646-5:1996
IT - OSI - Conformance testing methodology and framework: Part 5:Requirements on test laboratories and clients for the conformance assessment process
11. MS ISO/IEC 9646-6:1996
IT – OSI - Conformance testing methodology and framework: Part 6: Protocol profile test specification
12. MS ISO/IEC 9834-1:1996
IT – OSI - Procedures for the operation of OSI registration authorities: Part 1: General procedures
13. MS ISO/IEC 9834-2:1996
IT – OSI - Procedures for the operation of OSI registration authorities: Part 2: Registration procedures for OSI document types
14. MS ISO/IEC 9834-4:1996
IT – OSI - Procedures for the operation of OSI registration authorities: Part 4: Register of VTE profiles
15. MS ISO/IEC 9834-5:1996
IT – OSI - Procedures for the operation of OSI registration authorities: Part 5: Register of VT control object definitions
16. MS ISO/IEC 9834-6:1996
IT – OSI - Procedures for the operation of OSI registration authorities: Part 6: Application processes and application entities
17. MS ISO/IEC 10165-4:1996
Information technology - Open systems interconnection - Management information services - Structure of information management: Part 4: Guidelines for the definition of managed objects
18. MS ISO/IEC 10165-5:1996
Information technology - Open systems interconnection - Management information services - Structure of information management: Part 5: Generic management information
19. MS ISO/IEC 10177:1996
Information technology - Telecommunications and information exchange between systems; provision of the connection -mode network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 packet layer protocol
20. MS ISO/IEC 10183-1:1996
Information technology - Text and office systems - Office document architecture (ODA) and interchange format - Technical report on ISO 8613 implementation testing: Part 1: Testing methodology
21. MS ISO/IEC 10183-2:1996 Information technology - Text and office systems - Office document architecture (ODA) and interchange format - Technical report on ISO 8613 implementation testing: Part 2: Framework for abstract test cases
22. MS ISO 10202-6:1996
Financial transaction cares - Security architecture of financial transaction systems using integrated circuit cards: Part 6: Cardholder verification
23. MS ISO/IEC 10206:1993
Information technology - Programming languages - Extended Pascal
24. MS ISO/IEC ISP 10609-1:1996
ASEAN STANDARDS AND QUALITY BULLETIN -46-
standards update
Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 1: Sub-network-type independent requirements for group TB
25. MS ISO/IEC ISP 10609-2:1996
Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 2: Sub-network-type independent requirements for group TC
26. MS ISO/IEC ISP 10609-3:1996
Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 3: Sub-network-type independent requirements for group TD
27. MS ISO/IEC ISP 10609-4:1996
Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 4: Sub-network-type independent requirements for group TD
28. MS ISO/IEC ISP 10609-5:1996
Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 5: Definition of profiles TB1111/’TB1121
29. MS ISO/IEC ISP 10609-6:1996
Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 6: Definition of profiles TC1111/TC1121
30. MS ISO/IEC ISP 10609-7:1996
Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 7: Definition of profiles TD1111/TD1121
31. MS ISO/IEC ISP 10609-8:1996
Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode
network service: Part 8: Definition of profiles TE1111/TE1121
32. MS ISO/IEC ISP 10609-9:1996
Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 9: Sub-network-type dependent requirements for network layer, data link layer and physical layer concerning permanent access to a packet switched data networking using virtual calls
33. MS ISO/IEC ISP 10609-10:1996
Information technology – ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 10: LAN sub-network- dependent, media-independent requirements
34. MS ISO/IEC ISP 10609-11:1996
Information technology – ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 11: CSMA/CD sub-network- dependent, media-dependent requirements
35. MS ISO/IEC ISP 10609-12:1996
Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 12: Definition of profile TC51, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a CSMA/CD LAN
36. MS ISO/IEC ISP 10609-14:1996
Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 14: Definition of profile TC53, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a token ring LAN
37. MS ISO/IEC ISP 10613-1:1996
Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 1: Sub-network independent requirements
38. MS ISO/IEC ISP 10613-2:1996
Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 2: LAN sub-network-independent, media- independent requirements
39. MS ISO/IEC ISP 10613-3:1996
Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 3: CSMA/CD LAN sub-network-independent, media-dependent requirements
40. MS ISO/IEC ISP 10613-5:1996
Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 5: Definition of profile RA51.51, relaying the connectionless-mode network service between CSMA/CD LAN sub-networks
41. MS ISO/IEC ISP 10613-7:1996
Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 7: PSDN sub-network-dependent, media-dependent requirements for virtual calls over a permanent access
42. MS ISO/IEC ISP 10613-8:1996
Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 8: Definition of profile RA51.1111, relaying the connectionless-mode network service between CSMA/CD LAN sub-networks and PSDNs using virtual calls over a PSTN leased line permanent access
43. MS ISO/IEC ISP 10613-9:1996
Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 9: Definition of profile RA51.1121, relaying the
ASEAN STANDARDS AND QUALITY BULLETIN -47-
standards update
connectionless-mode network service between CSMA/CD LAN sub-networks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access
44. MS ISO/IEC 10739-1:1996 Information technology - OSI - Conformance test suite for ISO 9041-1, Virtual terminal basic class protocol: Part 1: Test suite structure and test purpose
45. MS ISO/IEC 10742:1996
Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI data link layer standards
46. MS ISO/IEC 11579-1:1996
Information technology - Telecommunication and information exchange between systems - Private integrated service network: Part 1: Reference configuration for PISN exchanges (PINX) specifications
47. MS ISO/IEC 12075:1996
Information technology - Customer premises cabling - Planning and installation guide to support ISO/IEC 8802-5 token ring stations
48. MS ISO/IEC 13213:1996
Information technology - Microprocessor systems - Control and status register (CSR) architecture for microcomputer buses
49. MS ISO/IEC 15802-4:1996
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Common specifications: Part 4: System local protocol
Withdrawal of Malaysian Standard
1. MS 826: Part 15: 1989
Specification for information processing – Vocabulary: Part 15: Programming languages
2. MS 1298:1992
Information processing systems computer graphics Graphical kernel systems (GKS) functional description
3. MS ANSI/IEEE STD 960:1995
Fast bus modular high-speed data acquisition and control system
4. MS ISO/IEC 9282: Part 2:1995
Information processing – Coded representation of pictures incremental encoding of point lists in a 7-bit or 8-bit environment
5. MS ISO 2382: Part 11:1995
Information processing systems – Vocabulary: Part 11: Processing units
APPROVED ON 10 SEPTEMBER 2003 New Malaysian Standards 1. MS ISO/IEC Guide 50:2003
Child safety and standards – General guidelines
2. MS ISO 11540:2003
Caps for writing and marking instruments intended for use by children up to 14 years of age – Safety requirements
3. MS ISO 8317:2003
Child-resistant packaging – Requirements and testing procedures for reclosable packages
4. MS ISO 8098:2003
Cycles – Safety requirements for bicycles for young children
5. MS ISO 9177-1:2003
Mechanical pencils – Part 1: Classification, dimensions, performance requirements and testing
6. MS ISO 9177-2:
Mechanical pencils – Part 2: Black leads – Classification and dimensions
7. MS ISO 9177-3:
Mechanical pencils – Part 3: Black leads – Bending strength of HB leads
8. MS ISO 9175-1:
Tubular tips for hand-held technical pens using India ink on tracing paper – Part 1: Definitions, dimensions, designations and marking
9. MS ISO 9180:
Black leads for wood-cased pencils – Classification and diameters
10. MS ISO 14145:
Roller ball pens and refills – Part 1: General use
11. MS 1564:Part 1:2003
Mobile waste containers: Part 1: Containers with two wheels, with a capacity from 80 L to 390 L for comb lifting devices – Dimensions and design
12. MS 1564: Part 2:2003
Mobile waste containers: Part 2: Containers with four wheels, with a capacity from 500 L to 1 200 L with flat lid(s), for trunnion and/or comb lifting devices – Dimensions and design
13. MS 1704: Part 1:2003
High-yield strength flat steel products: Part 1: General requirements
14. MS 1705:2003
Hot-rolled carbon steel strip and sheet of commercial and drawing qualities
15. MS 1704: Part 2:2003
High-yield strength flat steel products: Part 2: Products supplied in the normalized or thermal mechanical controlled rolling
16. MS ISO 7858-1:2003
Measurement of water flow in closed conduits – Combination meters for cold potable water – Part 1: Specification
17. MS ISO 7858-2:2003
Measurement of water flow in closed conduits – Combination meters for cold potable water – Part 2: Installation
18. MS ISO 7858-3:2003
Measurement of water flow in closed conduits – Combination meters for cold potable water – Part 3: Test methods
ASEAN STANDARDS AND QUALITY BULLETIN -48-
standards update
Revised Malaysian Standard 3. MS 555: Part 1:2003
Fire dampers: Part 1: Specification (Second revision) (Replaces MS 555:1985)
4. MS 555: Part 2:2003
Fire dampers: Part 1: Installation (Second revision) (Replaces MS 555:1985)
Withdrawal of Malaysian Standard
1. MS 400: Part 1: Group 01:1989
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunication and electronics: Group 01: Fundamental terminology (First revision)
2. MS 400: Part 1: Group 02:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 02: General technological terminology
3. MS 400: Part 1: Group 03:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 03: Relay terminology
4. MS 400: Part 1: Group 04:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 04: Measurement terminology
5. MS 400: Part 1: Group 05:
Section 1:1977 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 05: Semiconductor terminology: Section 1: Semiconductor material (First revision)
6. MS 400: Part 1: Group 05: Section 2:1977 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 05: Semiconductor terminology: Section 2: Semiconductor devices
7. MS 400: Part 1: Group 06:
Section 1:1976 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 06: Electronic tube terminology: Section 1: General
8. MS 400: Part 1: Group 06:
Section 2 & 3:1976 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 06: Electronic tube terminology: Section 2: Construction: Section 3: Types of tube
9. MS 400: Part 1: Group 06: Section 4:1978 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 06: Electronic tube terminology: Section 4: Properties and quantities
10. MS 400: Part 1: Group 08:1982
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunication and electronics: Group 08: Piezo-electric device terminology
11. MS 400: Part 2: Group 01:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 01: General power terminology
12. MS 400: Part 2: Group 02:
Section 1,2,3,4:1979
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group: Static convertor terminology: Section 1: General terms; Section 2: Terms applicable to various parts of asymmetrically conducting devices; Section 3: Terms applicable to components of static convertor circuit: Section 4: Terms applicable to the arrangement of static convertor circuits
13. MS 400: Part 2: Group 02:
Section 5,6, & 7:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 02: Static convertor terminology: Section 5: Terms applicable to the electrical operation of static convertors: Section 6: Terms applicable to cooling methods: Section 7: Terms applicable to rating system
14. MS 400: Part 2: Group 03:
Section 2:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 03: Rotating machinery terminology: Section 2: Winding, magnetic and electrical parts
15. MS 400: Part 2: Group 03:
Section 1:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 03: Rotating machinery terminology: Section 1: Machines
16. MS 400: Part 2: Group 03:
Section 3:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 03: Rotating machinery terminology: Section 3: Mechanical parts
17. MS 400: Part 2: Group 04:1976
ASEAN STANDARDS AND QUALITY BULLETIN -49-
standards update
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2:Terms particular to power engineering: Group 04: Transformer terminology: Section 3: Mechanical parts
18. MS 400: Part 2: Group 05:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 05: Voltage fluctuation terminology
19. MS 400: Part 2: Group 06:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 06: Switchgear and controlgear terminology (including fuse terminology)
20. MS 400: Part 2: Group 07:1979
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 07: Tariffs terminology
21. MS 400: Part 2: Group 08:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 08: Power cable terminology
22. MS 400: Part 3: Group 01:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 01: General telecommunications and electronics terminology
23. MS 400: Part 3: Group 02:
Section 1 & 2:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 02: Telephony terminology: Section 1: Subscribers' stations and equipment: Section 2: Exchanges and positions
24. MS 400: Part 3: Group 02:
Section 3 & 4:1979
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 02: Telephony terminology: Section 3: Exchanges equipment: Section 4: Repeater stations
25. MS 400: Part 3: Group 02:
Section 5:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 02: Telephony terminology: Section 5: Systems and circuits
26. MS 400: Part 3: Group 03: 1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 03: Telegraphy, including facsimile terminology
27. MS 400: Part 3: Group 04:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 04: Broadcasting, radio and television terminology
28. MS 400:Part 3: Group 05:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 05: Propagation and media terminology
29. MS 400:Part 3: Group 06:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunication and electronics: Group 06: Radio location and navigation terminology
30. MS 400:Part 3: Group 07:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular
to telecommunication and electronics; Group 07: Radio communication terminology
31. MS 400: Part 4: Group 01:1976
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 4: Terms particular to lighting and colour: Group 01: Radiation and photometry
32. MS 400: Part 4: Group 02:1977
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 4: Terms particular to lighting and colour: Group 02: Vision and colour terminology
33. MS 400: Part 4: Group 03:1977
Glossary of electrotechnical, power telecommunication, electronics, lighting and colour terms: Part 4: Terms particular to lighting and colour: Group 03: Lighting technology terminology
34. MS 400: Part 3: Group 09:1986
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 09: Waveguide terminology
35. MS 400: Part 3: Group 10:1986
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunication and electronics: Group 10: Recording and reproduction of sound and video terminology
36. MS 433:1976 Specification for separators for
lead acid batteries 37. MS 438:1976 Specification for stationary
batteries 38. MS 649: Part 1:1982 Glossary of terms used in the
petroleum industry: Part 1 39. MS 649: Part 2:1980 Glossary of terms used in the
petroleum industry: Part 2
ASEAN STANDARDS AND QUALITY BULLETIN -50-
standards update
APPROVED ON 07 OCTOBER 2003
New Malaysian Standards
1. MS 1706:2003 Test method for ash content of
engine coolants and antirusts 2. MS 1707:2003
Test method for relative density of engine coolant concentrates and engine coolants by the hydrometer
3. MS 1708:2003 Test method for corrosion test
for engine coolants 4. MS 1709:2003 Terminology for engine coolants 5. MS 1710:2003 Test method for trace chloride
ion in engine coolants 6. MS 1711: Part 1:2003 Furniture – Office chair
(adjustable): Part 1: Dimensions – Determination of dimensions
7. MS 1711: Part 2:2003 Furniture – Office chair
(adjustable) – Part 2: Safety requirements
8. MS 1711: Part 3:2003 Furniture – Office chair
(adjustable) – Part 3: Safety test methods
9. MS 1712:2003
Electrical apparatus for explosive gas atmospheres – Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
10. MS 1713:2003
Electrical apparatus for explosive gas atmospheres – Construction and use of rooms or buildings protected by pressurisation
11. MS 1597: Part 2-75:2003
Household and similar electrical appliances: Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
12. MS 1597: Part 2-73:2003
Household and similar electrical appliances – Safety – Part 2-73: Particular requirements for fixed immersion heaters
13. MS 1597: Part 2-6:2003
Household and similar electrical appliances – Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances (First revision)
14. MS 1597: Part 2-43:2003
Household and similar electrical appliances – Safety - Part 2-43: Particular requirements for clothes dryers and towel rails
15. MS 1597: Part 2-54:2003
Household and similar electrical appliances – Safety – Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
16. MS 1597: Part 2-84:2003
Household and similar electrical appliances – Safety - Part 2-84: Particular requirements for toilets
17. MS ISO 2871-1:2003
Surface active agents – Detergents – Determination of cationic-active matter content – Part 1: High-molecular-mass cationic-active matter
18. MS ISO 2871-2:2003
Surface active agents – Detergents – Determination of cationic-active matter content – Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
19. MS ISO 2271:2003
Surface active agents – Detergents – Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
20. MS ISO 7345:2003 Thermal insulation – Physical
quantities and definitions 21. MS ISO 9251:2003 Thermal insulation – Heat
transfer conditions and
properties of materials - Vocabulary
22. MS ISO 9288:2003
Thermal insulation – Heat transfer by radiation – Physical quantities and definitions
23. MS IEC 60335-2-101:2003
Household and similar electrical appliances – Safety – Part 2-101: Particular requirements for vaporizers
24. MS IEC 60269-2-1:2003
Low-voltage fuses – Part 2-1: Supplementary requirements for fuses for use by authorized persons (Fuses mainly for industrial application) – Section I to VI: Examples of types of standardized fuses
25. MS IEC 61009-1:2003
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCB0s) – Part 1: General rules
26. MS IEC 61009-2-1:2003
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) – Part 2-1: Applicability of the general rules to RCBO’s functionally independent of line voltage
27. MS IEC 61009-2-2:2003
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCBOs) – Part 2-2: Applicability of the general rules to RCBO’s functionally dependent on line voltage
28. MS IEC 61000-4-15:2003
Electromagnetic compatibility (EMC) – Part 4: Testing and measurement techniques – Section 15: Flickermeter – Functional and design requirements
29. MS IEC 60335-2-42:2003
Safety of household and similar electrical appliances: Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection oven
ASEAN STANDARDS AND QUALITY BULLETIN -51-
standards update
30. MS IEC 60439-1:2003 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
31. MS IEC 60439-3:2003
Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards
32. MS IEC 60079-4:2003
Electrical apparatus for explosive gas atmospheres – Part 4: Method of test forignition temperature
33. MS IEC 61000-4-7:2003
Electromagnetic compatibility (EMC) – Part 4-7: Testing and measurement techniques – General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
34. MS IEC 61000-2-12:2003
Electromagnetic compatibility (EMC) – Part 2-12: Environment – Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
35. MS IEC 60335-2-98:2003
Household and similar electrical appliances – Safety - Part 2-98: Particular requirements for humidifier
36. MS IEC 60335-2-97:2003
Household and similar electrical appliances – Safety – Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
37. MS IEC 60335-2-95:2003
Household and similar electrical appliances – Safety – Part 2-95: Particular requirements for vertically moving garage doors for residential use
38. MS IEC 60335-2-85:2003
Household and similar electrical appliances – Safety - Part 2-85: Particular requirements for fabric steamer
39. MS IEC 60335-2-78:2003
Household and similar electrical appliances – Safety - Part 2-78: Particular requirements for outdoor barbecues
40. MS IEC 60335-2-55:2003
Household and similar electrical appliances – Safety – Part 2-55: Particular requirements for electric appliances for use with aquariums and garden ponds
41. MS IEC 60335-2-53:2003
Household and similar electrical appliances – Safety - Part 2-53: Particular requirements for sauna heating appliances
42. MS IEC 60335-2-45:2003
Household and similar electrical appliances – Safety – Part 2-45: Particular requirements for portable heating tools and similar appliances (First revision)
43. MS IEC 60335-2-41:2003
Household and similar electrical appliances – Safety – Part 2-41: Particular requirements for electric pumps
44. MS IEC 60335-2-31:2003
Household and similar electrical appliances – Safety – Part 2-31: Particular requirements for range hood
45. MS IEC 60335-2-23:2003
Household and similar electrical appliances – Safety – Part 2-23: Particular requirements for appliances for skin or hair care (First revision)
46. MS IEC 60335-2-12:2003
Household and similar electrical appliances – Safety – Part 2-12: Particular requirements for warming plates and similar appliances
47. MS IEC 60335-2-11:2003
Household and similar electrical appliances – Safety – Part 2-11: Particular requirements for tumble dryers (First revision)
48. MS IEC 60335-2-14:2003 Household and similar electrical appliances – Safety – Part 2-14: Particular requirements for kitchen machines (First revision)
49. MS IEC 60335-2-26:2003
Household and similar electrical appliances – Safety – Part 2-26: Particular requirements for clocks (First revision)
50. MS IEC 60335-2-28:2003
Household and similar electrical appliances – Safety – Part 2-28: Particular requirements for sewing machines (First revision)
51. MS IEC 60335-2-74:2003
Household and similar electrical appliances – Safety - Part 2-74: Particular requirements for portable immersion heaters (First revision)
52. MS IEC 60898-2:2003
Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 2: Circuit-breakers for a.c. and d.c. operation (First revision)
53. MS IEC 60898-1:2003
Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 1: Circuit-breakers for a.c. operation (First revision)
54. MS IEC 60264-4:2003
Low-voltage fuses – Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
55. MS IEC 61347-2-5:2003
Lamp controlgear - Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting
56. MS IEC 61347-2-6:2003
Lamp controlgear - Part 2-6: Particular requirements for d.c. supplied electronic ballasts for aircraft lighting
57. MS IEC 61347-2-7:2003
Lamp controlgear - Part 2-7: Particular requirements for d.c.
ASEAN STANDARDS AND QUALITY BULLETIN -52-
standards update
supplied electronic ballasts for emergency lighting
58. MS IEC 61347-2-8:2003 Lamp controlgear - Part 2-8:
Particular requirements for ballasts for fluorescent lamps
59. MS IEC 61347-2-9:2003
Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
60. MS IEC 61347-2-10:2003
Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
61. MS 60081:2003 Double-capped fluorescent
lamps - Performance specifications
62. MS IEC 60925:2003
DC supplied electronic ballasts for tubular fluorescent lamps – Performance requirements
63. MS IEC 61347-1:2003 Lamp controlgear - Part 1:
General and safety requirements
64. MS IEC 61347-2-1:2003
Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)
65. MS IEC 61347-2-2:2003
Lamp controlgear - Part 2-2: Particular requirements for d.c. and a.c. supplied electronic step-down convertors for filament lamps
66. MS IEC 61347-2-3:2003
Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
67. MS IEC 61347-2-4:2003
Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting
68. MS IEC 60335-2-32:2003
Household and similar electrical appliances – Safety - Part 2-32: Particular requirements for massage appliances (First revision)
69. MS IEC 60335-2-51:2003 Household and similar electrical appliances – Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
70. MS IEC 60335-2-82:2003
Household and similar electrical appliances – Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
71. MS IEC 60335-2-29:2003
Household and similar electrical appliances – Safety – Part 2-29: Particular requirements for battery chargers (First revision)
72. MS ISO 898-1:2003
Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs
73. MS ISO 898-2:2003
Mechanical properties of fasteners – Part 2: Nuts with specified proof load values – Coarse thread
74. MS ISO 898-5:2003
Mechanical properties of fasteners made of carbonsteel and alloy steel – Part 5: Set screws and similar threaded fasteners not under tensile stresses
75. MS ISO 898-6:2003
Mechanical properties of fasteners – Part 6: Nuts with specified proof load values – Fine pitch thread
76. MS ISO 898-7:2003
Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
77. MS ISO 3183-1:2003
Petroleum and natural gas industries – Steel pipe for pipelines – Technical delivery conditions – Part 1: Pipes of requirement class A
78. MS ISO 3183-2:2003
Petroleum and natural gas industries – Steel pipe for pipelines – Technical delivery
conditions – Part 2: Pipes of requirement class B
79. MS ISO 3183-3:2003
Petroleum and natural gas industries – Steel pipe for pipelines – Technical delivery conditions – Part 3: Pipes of requirement class C
80. MS ISO 14532:2003 Natural gas - Vocabulary
Revised Malaysian Standard
1. MS 830:2003
Code of practice for the storage, handling and transportation of liquefied petroleum gases (Second revision)
Confirmation of Malaysian Standard
1. MS 284:1975 Specification for carbon paper,
handwriting 2. MS 285:1975 Specification for paper
(duplicating, copy, liquid process)
3. MS 333:1976 Specification for stencil paper
(duplicating machine, dry process)
4. MS 398:1976 Specification for corrugated
fibreboard boxes 5. MS 430:1976 Specification for ink paste, black
(stencil, duplicating – machine) 6. MS ISO 11210:1997
Determination of platinum in platinum jewellery alloys – Gravimetric method after precipitation of diammonium hexachloroplatinate
Withdrawal of Malaysian Standard
1. MS 764: Part 1:1982 Specification for fixed resistors:
Part 1: Terms and methods of test
2. MS 764: Part 3: Type 1:1982
ASEAN STANDARDS AND QUALITY BULLETIN -53-
standards update
Standard for fixed resistors: Part 3: Wirewound resistors: Type 1: Selection of methods of test and general requirements
3. MS 767:1982
Standard for marking codes for resistors and capacitors
4. MS IEC 60898:1998
Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations (MCB’s)
5. MS 472: Part 2: Sec 2.11:1987
Specification for testing and approval of household and similar appliances: Part 2: Section 2.11: Floor treatment and wet scrubbing machines for household and similar purposes
6. MS IEC 60364-2-21:1996
Electrical installations of buildings: Part 2: Definitions: Chapter 21: Guide to general terms
7. MS IEC 60364-3: 1996 Electrical installations of
buildings: Part 3: Assessment of general characteristic
8. MS IEC 60364-4-41:1996
Electrical installations of buildings: Part 4-41: Protection for safety: Protection against electric shock
9. MS IEC 60364-4-42:1996
Electrical installations of buildings: Part 4-42: Protection for safety: Protection against thermal effects
10. MS IEC 60364-4-442:1996
Electrical installations of buildings: Part 4-442: Protection against overvoltages – Section 442: Protection of low-voltage installations against faults between high-voltage systems and earth
11. MS IEC 60364-4-443:1996
Electrical installations of buildings: Part 4-443: Protection against overvoltages – Section 443: Protection against overvoltages of atmospheric origin or due to switching
12. MS IEC 60364-4-45:1996
Electrical installations of buildings: Part 4: Chapter 45: Protection against undervoltage
13. MS IEC 60364-4-46:1996
Electrical installations of buildings: Part 4: Protection for safety: Chapter 46: Isolation and switching
14. MS IEC 60364-4-47:1996
Electrical installations of buildings: Part 4: Protection for safety: Chapter 47: Application of protective measures for safety: Section 470: General: Section 471: Measures of protection against electric shock
15. MS IEC 60364-4-473:1996 Electrical installations of buildings: Part 4: Protection for safety: Section 473: Measures of protection against overcurrent
16. MS IEC 60364-4-481:1996
Electrical installations of buildings: Part 4: Protection for safety: Chapter 48: Choice of protective measures as a function of external influences: Section 481: Selection of measures for protection against electric shock in relation to external influences
17. MS IEC 60364-4-482:1996
Electrical installations of buildings: Part 4: Protection for safety: Section 48: Choice of protective measures as a function of external influences: Section 482: Protection against fire
18. MS IEC 60364-5-51:1996
Electrical installations of buildings: Part 5-51: Selection and erection of electrical equipment - Common rules
19. MS IEC 60364-5-53:1996
Electrical installations of buildings: Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
20. MS IEC 60364-5-56:1996 Electrical installations of
buildings: Part 5-56: Safety services
21. MS IEC 60364-6-61:1996
Electrical installations of buildings: Part 6: Verification: Chapter 61: Initial verification
22. MS IEC 60364-5-523:1996
Electrical installations of buildings: Part 5: Selection and erection of electrical equipment: Section 52: Wiring systems: Section 523: Current-carrying capacities
23. MS IEC 60364-5-537:1996
Electrical installations of buildings: Part 5: Selection and erection of electrical equipment: Chapter 53: Switchgear and controlgear: Section 537: Devices for isolation and switching
24. MS IEC 60364-7-702:1996
Electrical installations of buildings: Part 7: Requirements for special installations or locations: Section 702: Swimming pools and other basins
25. MS IEC 60364-7-704:1996
Electrical installations of buildings: Part 7-704: Requirements for special installations: Construction and demolition site installation
APPROVED ON 07 NOVEMBER 2003
New Malaysian Standards
1. MS 471: Part 2:2003
Glossary of terms related to timber and wood-based panel products: Part 2: Wood-based panel products
2. MS 471: Part 3:2003
Glossary of terms related to timber and wood-based panel products: Part 3: Carpentry, joinery and furniture
3. MS 1714:2003 Specification for visual strength
grading of tropical hardwood timber
Revised Malaysian Standard 1. MS 956:2003
Spesifikasi bagi timun (Ulangkaji kedua)
2. MS 951:2003
ASEAN STANDARDS AND QUALITY BULLETIN -54-
standards update
Spesifikasi bagi kacang panjang (Ulangkaji kedua)
3. MS 893:2003 Spesifikasi bagi tomato
(Ulangkaji kedua)
APPROVED ON 10 DECEMBER 2003
New Malaysian Standards 1. MS 1282: Part 9:2003
Food additives: Part 9: Emulsifiers
2. MS 1715:2003
Specification for chocolate and chocolate products
3. MS 1714:2003 Specification for visual strength
grading of tropical hardwood timber
4. MS 1717: Part 1:2003 Specification for diuron: Part 1:
Diuron technical 5. MS 1717: Part 2:2003 Specification for diuron: Part 2:
Diuron wettable powder 6. MS 1717: Part 3:2003 Specification for diuron: Part 3:
Diuron water-dispersible granules
7. MS 1717: Part 4: 2003 Specification for diuron: Part 4:
Suspension concentrate 8. MS 1718:2003 Sodium hypochlorite for use in
potable water supply – Specification
9. MS 1719:2003 Specification for raised
pavement markers (RPM) 10. MS 544: Part 10:2003
Code of practice for structural use of timber: Part 10: Preservative treatment of structural timber
11. MS 1720:2003 Welded carbon steel gas
cylinders – Periodic inspection and testing
12. MS 1721:2003 Structural steels – Plates, wide
flats and wide strips
13. MS 1722:2003 Occupational safety and health
management system - Guidelines
14. MS 1723: 2003
Performance evaluation of air pollution control and treatment systems: Mechanical dust collectors
15. MS ISO 5809:2003 Starches and derived products:
Determination of sulphated ash 16. MS ISO 1666:2003
Starches and derived products – Determination of moisture content – Oven-drying method
17. MS ISO 5381:2003
Starches and derived products - Determination of water content - Modified Karl Fischer method
18. MS ISO 11212-4:2003
Starches and derived products - Determination of cadmium content by atomic absorption spectrometry with electro-thermal atomization
19. MS ISO 10520:2003
Starches and derived products - Determination of starch content - Ewers polarimetric method
20. MS ISO 10504:2003
Starches and derived products - Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups - Method using high-performance liquid chromatography
21. MS ISO 11212-3:2003
Starches and derived products - Determination of lead content by atomic absorption spectrometry with electrothermal atomization
22. MS ISO 11212-2:2003
Starches and derived products - Determination of mercury content by atomic absorption spectrometry
23. MS ISO 11212-1:2003
Starches and derived products - Determination of arsenic
content by atomic absorption spectrometry
24. MS ISO 2837:2003 Graphic technology - Prints and
printing inks - Assessment of resistance to solvents
25. MS ISO 6486-1:2003
Ceramic ware, glass ceramic ware and glass dinnerware in contact with food – Release of lead and cadmium – Part 1: Test method
26. MS ISO 6486-2:2003
Ceramic ware, glass ceramic ware and glass dinnerware in contact with food – Release of lead and cadmium – Part 2: Permissible limits
27. MS ISO 4064-2:2003
Measurement of water flow in closed conduits – Meters for cold potable water – Part 2: Installation requirements and selection
28. MS ISO 4064-3:2003
Measurement of water flow in closed conduits – Meters for cold potable water – Part 3: Test methods and equipment
29. MS ISO 10385-1:2003
Measurement of water flow in closed conduits – Meters for hot water – Part 1: Specifications
30. MS ISO 4301-3:2003 Cranes – Classification – Part 3:
Tower Cranes 31. MS ISO 3155:2003 Stranded wire ropes for mine
hoisting – Fibre components – Characteristics and tests
32. MS ISO 4301-1:2003 Cranes and lifting appliances –
Classification – Part 1: General 33. MS ISO 3154:2003 Stranded wire ropes for mine
hoisting – Technical delivery requirements
34. MS ISO/IEC 14443-1:2003
Identification cards - Contactless integrated circuit(s) cards – Proximity cards - Part 1: Physical characteristics
35. MS ISO/IEC 14443-2:2003
ASEAN STANDARDS AND QUALITY BULLETIN -55-
standards update
Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 2: Radio frequency power and signal interface
36. MS ISO/IEC 14443-3:2003
Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 3: Initialization and anticollision
37. MS ISO/IEC 14443-4:2003
Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 4: Transmission protocol
38. MS ISO/IEC 12119:2003
Information technology - Software packages - Quality requirements and testing
39. MS ISO 19101:2003 Geographic information -
Reference model 40. MS ISO 19108:2003 Geographic information -
Temporal schema 41. MS ISO 19111:2003 Geographic information - Spatial
referencing by coordinates 42. MS ISO 19113:2003 Geographic information - Quality principles 43. MS ISO 19107:2003 Geographic information - Spatial schema 44. MS ISO 19115:2003 Geographic information -
Metadata referencing by coordinates
45. MS ISO/IEC 8802-2:2003
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 2: Logical link control
46. MS ISO/IEC 8802-3:2003
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method
and physical layer specifications
47. MS ISO/IEC 8802-11:2003
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
48. MS ISO/IEC 15802-2:2003
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Common specifications - Part 2: LAN/MAN management
49. MS ISO/IEC 15802-3:2003
Information technology-Telecommunications and information exchange between systems - Local and metropolitan area networks - Common specifications - Part 3: Media access control (MAC) bridges
50. MS ISO/IEC 9594-4:2003 Information technology - Open systems interconnection - The directory: Procedures for distributed operation
51. MS ISO/IEC 8802 - 5:2003
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 5: Token ring access method and physical layer specifications
52. MS ISO/IEC 10165-6:2003
Information technology - Open systems interconnection - Structure of management information: Requirements and guidelines for implementation conformance statement proformas associated with OSI management
53. MS ISO/IEC 11571:2003
Information technology - Telecommunications and information exchange between systems - Private integrated services networks – Addressing
54. MS ISO/IEC 11572:2003
Information technology - Telecommunications and information exchange between systems - Private integrated services network - circuit mode bearer services - Inter-exchange signalling procedures and protocol
55. MS ISO/IEC 11574:2003
Information technology -Telecommunications and information exchange between systems - Private integrated services network - Circuit-mode 64 kbit/s bearer services - Service description, functional capabilities and information flows
56. MS ISO/IEC 10611-4:2003
Information technology - International standardised profiles AMH1n - Message handling systems - Common messaging-Part 4:AMH12 and AMH14 - MTS access (P3) and MTS 94 access (P3)
57. MS ISO/IEC 10611-5:2003
Information technology - International standardised profiles AMH1n - Message handling systems - Common messaging - Part 5: AMH13 - MS access (P7)
58. MS ISO 10160:2003
Information and documentation - Open systems interconnection - Interlibrary - Loan application service definition
59. MS ISO/IEC 8632-3:2003
Information technology - Computer graphics - Metafile for the storage and transfer of picture description information - Part 3: Binary encoding (First revision)
60. MS ISO/IEC 8632-4:2003
Information technology - Computer graphics - Metafile for the storage and transfer of picture description information - Part 4: Clear text encoding (First revision)
61. MS ISO 13850:2003 Safety of machinery -
Emergency stop - Principles for design
62. MS ISO 13852:2003
Safety of machinery - safety distances to prevent danger
ASEAN STANDARDS AND QUALITY BULLETIN -56-
standards update
zones being reached by the upper limbs
63. MS ISO 13853:2003
Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs
64. MS ISO 13854:2003 Safety of machinery - Minimum
gaps to avoid crushing of parts of the human body
65. MS ISO 13856-1:2003
Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
66. MS ISO 14122-2:2003
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways
67. MS ISO 14122-3:2003
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails
68. MS ISO 14123-2:2003 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
69. MS ISO 13849-1:2003
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
70. MS ISO 7250:2003 Basic human body
measurements for technological design
71. MS ISO 9355-1:2003
Ergonomic requirements for the design of displays and control actuators - Part 1: Human interactions with displays and control actuators
72. MS ISO 9355-2:2003
Ergonomic requirements for the design of displays and control actuators - Part 2: Displays
73. MS ISO 11064-1:2003
Ergonomic design of control centres - Part 1: Principles for the design of control centres
74. MS ISO 11064-2:2003
Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites
75. MS ISO 11064-3:2003 Ergonomic design of control
centres - Part 3: Control room layout
76. MS ISO 11226:2003 Ergonomics - Evaluation of
static working postures 77. MS ISO 15534-1:2003
Ergonomic design for the safety of machinery - Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
78. MS ISO 15534-2:2003
Ergonomic design for the safety of machinery - Part 2: Principles for determining the dimensions required for access openings
79. MS ISO 17024:2003
Conformity assessment – General requirements for bodies operating certification of persons
80. MS ISO 10012:2003
Measurement management systems – Requirements for measurement processes and measuring equipment
Revised Malaysian Standard 1. MS 302:2003
Specification for canned pineapple (First revision)
2. MS 743:2003 Specification for cattle feed
(First revision) 3. MS 1102:2003
Specification for black and white pepper, ground (First revision)
4. MS 85:2003 Specification for edible wheat
flour (Second revision) 5. MS 1145:2003
Specification for fresh Eksotika papaya (First revision)
6. MS 1125:2003 Meat frankfurters – Specification
(First revision) 7. MS 1126:2003 Meat burgers – Specification
(First revision) 8. MS 1331:2003 Code of practice for access of
disable persons outside buildings (First revision)
Withdrawn Malaysian Standard 1. MS 85:2003 Specification for wheat flour
(First revision)
ASEAN STANDARDS AND QUALITY BULLETIN -57-
standards update
T H A I L A N D
January - December 2003
STANDARDS APPROVED 1. TIS 32-2546 (2003)
Test method for the release of lead and cadmium from ceramic ware, glass-ceramic ware and glassware in contact with food
2. TIS 77-2545(2002) Building bricks
3. TIS 501-2546(2003) Test methods for chemical resistance of pharmaceutical glass containers
4. TIS 508-2545(2002) Aluminium hydroxide compressed gel for pharmaceutical industry
5. TIS 564-2546(2003) Ceramic ware in contact with food : porcelain
6. TIS 601-2546(2003) Ceramic ware in contact with food: earthenware
7. TIS 602-2546(2003) Ceramic ware in contact with food: stoneware
8. TIS 603-2546(2003) Glassware in contact with food
9. TIS 791-2544(2001) Vitreous china sanitary appliances: wash basins
10. TIS 800-2545(2002) Door weather strips for automobiles
11. TIS 847-2545(2002) Magnesium hydroxide paste for pharmaceutical industry
12. TIS 913-2545(2002) Hard gelatin capsules
13. TIS 1179 Part 5-2543(2000) Code of practice for manufacture of prestressed concrete Part 5 Workmanship
14. TIS 1179 Part 6-2544(2001) Code of practice for manufacture of prestressed concrete Part 6 Inspection and testing
15. TIS 1508-2541(1998) Submersible motor-pumps for deep well
16. TIS 1859-2542(1999) Cellular plastics - specification for rigid cellular materials used in the thermal insulation of buildings
17. TIS 1860-2542(1999) Polymeric materials cellular flexible-polyurethane foam for load-bearing applications excluding carpet underlay specification
18. TIS 1861-2542(1999) Polymeric materials cellular flexible-polyvinychloride foam sheeting-specification
19. TIS 1879-2542(1999) Sodium chloride for pharmaceutical industry
20. TIS 1895-2542(1999) Flexible cellular polymeric materials-sponge and expanded cellular rubber products-specification - Part 1 : sheeting
21. TIS 1898-2542(1999) Plastics traps for discharge pipe ork systems inside building
22. TIS 1899-2542(1999) Thermoplastics pipes and fittings for hot and cold water systems
23. TIS 1912-2542(1999) Aggregates for asphalt pavement
24. TIS 2068-2544(2001) Industrial hexane
25. TIS 2069-2544(2001) Robber solvent
26. TIS 2076-2544(2001) Sound and television broadcast receivers and associated equipment -
immunity characteristics - limits and methods of measurement
27. TIS 2077-2544(2001) Information technology equipment - immunity characteristics - limits and methods of measurement
28. TIS 2109-2545(2002) Low voltage fuses Part 1 : general requirements
29. TIS 2110-2545(2002) Low voltage fuses Part 2 : Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
30. TIS 2111-2545(2002) Low voltage fuses Part 2-1 : Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
31. TIS 2112-2545(2002) Low voltage fuses Part 3 : Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
32. TIS 2113-2545(2002) Low voltage fuses Part 3-1 : Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
33. TIS 2114-2545(2002) Low voltage fuses Part 4 : Supplementary requirements for fuses - links for the protection of semiconductor devices
34. TIS 2119-2545(2002) Water for pharmaceutical use
35. TIS 2120-2545(2002) Guideline on the application on farm management for swine
36. TIS 2131-2545(2002) Prepainted hot-dip zinc-coated steel : coils and sheets
37. TIS 2132-2545(2002) Prepainted hot-dip zinc-coated
ASEAN STANDARDS AND QUALITY BULLETIN -58-
standards update
steel : corrugated
38. TIS 2133-2545(2002) Zinc coated flexible steel conduits for electrical wiring
39. TIS 2134-2545(2002) Room air conditioners environment requirements energy efficiency
40. TIS 2135-2545(2002) Coal fly ash for use as an admixture in concrete
41. TIS 2136-2545(2002) Coal fly ash for use as an admixture in concrete
42. TIS 2140-2546(2003) Cold rolled steel coil strip and sheet for automobiles uses
43. TIS 2143-2546(2003) Power cables with extruded insulation and their accessories for rated voltage from 1 kV (Um = 1.2 kV) up to 30 kV (Um = 36 kV)
44. TIS 2144-2546(2003) Power cables with extruded insulation and their accessories for rated voltage above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV)
45. TIS 19011-2546(2003) Guidelines for quality and/or environmental management systems auditing
STANDARDS REVISED 1.
TIS 569-2545(2002) Sodium tripolyphosphate for industrial use
STANDARDS WITHDRAWN
1. TIS 32-2528(1985) Test method for the release of lead and cadmium from ceramic ware, glass-ceramic ware and glassware in contact with food
2. (replaced by TIS 32-2546(2003)) Test method for the release of lead and cadmium from ceramic ware, glass-ceramic ware and glassware in contact with food
3. TIS 77-2531(1988) Building bricks
4. (replaced by TIS 77-2545(2002)) Building bricks
5. TIS 501-2527(1984) Test methods for chemical resistance of pharmaceutical glass containers
6. (replaced by TIS 501-2546(2003)) Test methods for chemical resistance of pharmaceutical glass containers
7. TIS 508-2527(1984) Aluminium hydroxide compressed gel for pharmaceutical industry
8. (replaced by TIS 508-2545(2002)) Aluminium hydroxide compressed gel for pharmaceutical industry
9. TIS 564-2529(1986) Ceramic ware in contact with food : porcelain
10. (replaced by TIS 564-2546(2003)) Ceramic ware in contact with food : porcelain
11. TIS 601-2529(1986) Ceramic ware in contact with food: earthenware
12. (replaced by TIS 601-2546(2003)) Ceramic ware in contact with food: earthenware
13. TIS 602-2529(1986) Ceramic ware in contact with food: stoneware
14. (replaced by TIS 602-2546(2003)) Ceramic ware in contact with food: stoneware
15. TIS 603-2529(1986) Glassware in contact with food
16. (replaced by TIS 603-2546(2003)) Glassware in contact with food
17. TIS 791-2531(1988) Vitreous china sanitary appliances: wash basins
18. (replaced by TIS 791-2544(2001)) Vitreous china sanitary appliances: wash basins
19. TIS 800-2531(1988) Door weather strips for automobiles
20. (replaced by TIS 800-2545(2002)) Door weather strips for automobiles
21. TIS 847-2532(1989) Magnesium hydroxide paste for pharmaceutical industry
22. (replaced by TIS 847-2545(2002)) Magnesium hydroxide paste for pharmaceutical industry
23. TIS 913-2532(1989) Hard gelatin capsules
24. (replaced by TIS 913-2545(2002)) Hard gelatin capsules
ASEAN STANDARDS AND QUALITY BULLETIN -59-
Top Related