I N D O N E S I A - asean.org - Bulletin 18/accsq17/12... · SNI 04-6950-2003 H igh voltag es...

standards update

I N D O N E S I A

STANDARDS APPROVED 1. SNI 01-6948.2-2003

Single action green tea roller - Part : Performance

2. SNI 01-5007.18-2003

Logs - Part 18: Industrial zed supplement teakwood logs

3. SNI 02-6949.1-2003

Green tea rotary drier - Part 1: Testing methods and procedure

4. SNI 01-5010.6-2003

Supporting in the forest and forestes field - Part 6: Blue strain on sawn timber and logs

5. SNI 01-5007.19-2003

Logs - Part 19: Hardwood logs 6. SNI 01-5006.13-2003

Forest plants - Part 13: Treatment of forest plan seeds through generative cultivation

7. SNI 04-6951.1-2003

Electrical test methodsfor electric cables - Part 1: Electrical tests for cables cords and wires for voltage up to and including 450/750 V

8. SNI 19-6964.2-2003

Seawater quality - Part 2: Mercury (Hg) testing methods with atomic absorbed spectrophotometry or mercury analyzer

9. SNI 19-6964.3-2003

Seawater quality - Part 3: Ammonia (NH3-N) testing methods with indophenol blue by way of spectrophotometry

10. SNI 19-6964.4-2003

Seawater quality - Part 1: Sulphides (S=) testing methods with methylen by way of spectrophotometry

11. SNI 04-6960-2003

Overhead lines - Requirements and test for spacers

12. SNI 04-6292.2.80-2003

Safety of householdand similar electrical appliances - Part 2-80: Particular requirements for fans

13. SNI 04-6292.2.8-2003 Safety of household and similar electrical appliances Part 2-8: Particular requirements for shavers, hair clippers and similar appliances

14. SNI 04-6186.25-2003

Electrical relays - Part 25: Electromagnetic emission on protection apparatus on realys measurement

15. SNI 04-6292.2.2-2003

Household and similar appliances - safety - Part 2-2: Particular requirements for vacuum cleaners and water - suction cleaning appliances

16. SNI 04-6292.2.69-2003

Safety of electrical and similar electrical appliances - Part 2-69: particular requirements for wet and dry vacuum cleaning including power brus, for industrial and commercial use

17. SNI 19-6963-2003

Documentation - Spires titles on books and other publications

18. SNI 04-6957-2003

Circuit breakers for equipment 19. SNI 04-6959.1-2003

Lamp controlgear - Part 1: General and safety requierments

20. SNI 04-6951.3-2003

Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurement on lengths exruded power cable

21. SNI 04-6952.2-2003

Connecting devices - Safety requirements for screw-type and screw less-type calmping unit for electric copper conductors - Part 2: Particular requirements for conductors from 35 mm2 up to 300 mm2

22. SNI 04-6959.2.3-2003

Lamp controlgear - Part 2-3: Particular requirements fpr a.c. suplied electronic ballasts for flourescent lamps

23. SNI 02-1213-2003

Completeness criteria and test method of tractor-plough for agriculture

24. SNI 19-6964.1-2003 Seawater quality - Part 1: Nitrites testing methods with sulfanilamides by way of spectrofotometry

25. SNI 04-6951.2-2003

Electrical test methods for electrical cables - Part 2: Partial discharge tests

26. SNI 04-6950-2003

High voltages overhead lines and extra higher voltages overhead lines - Limititaion value for electrical electromagnetic fields

27. SNI 04-6956.1-2003

Residual current operated circuit - breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 1: General rules

28. SNI 04-6292.2.25-2003

Safety of household and similar electrical appliances - Part 2-25: Particular requiremetns for microwave ovens

29. SNI 02-6949.2-2003

Green tea rotary drier - Part 2: Performance

30. SNI 04-6292.2.60-2003

Safety of household and similar electrical appliances - Part 2.60: Particular requirements for whirpool bath

31. SNI 04-6954.1-2003

Power transformers - Part 1: General

32. SNI 04-6292.2.7-2003

Safety of household and similar electrical appliances - Part 2-7: Particular requirements for washing machines

33. SNI 04-6953-2003

Small scall hydraulic electric power generation

34. SNI 04-6955.1-2003

Insulation coordination for equipment within low voltage system - Part 1: Principles, requirements and tests

35. SNI 04-6958-2003

Electrical power usage for household appliances and similar - Energy save marking labels

ASEAN STANDARDS AND QUALITY BULLETIN -42-

standards update

36. SNI 01-6948.1-2003 Single action green tea roller - Part 1: Testing methods and procedure

37. SNI 04-6961-2003

Protection against electric shock - Common asphalts for installation and equipments

38. SNI 16-2723-2003

Latex condoms 39. SNI 01-6947-2003

Fresh passion fruits 40. SNI 04-0227-2003

Standard voltages 41. SNI 01-5008.14-2003

Processed woods products - Part 14: Mahony sawn timber for the use of general purposes

42. SNI 01-6232.1-2003

Breeds seeds of open polinated corn

43. SNI 01-6232.2-2003

Foundation seeds of open polinated corn (Zea mays)

44. SNI 01-6232.3-2003

Stock seeds of open polinated corn (zea mays)

45. SNI 01-6232.4-2003

Extension seeds of open polinated corn (zea mays)

46. SNI 01-6233.1-2003

Breeder seeds of rice seeds 47. SNI 01-6233.2-2003

Foundation seeds of rice seeds (oryza sativa)

48. SNI 01-6233.3-2003

Stock seeds of rice seeds (oryza sativa)

49. SNI 01-6945-2003

Fresh mushrooms 50. SNI 01-6946-2003

Fresh cavendish bananas 51. SNI 19-6962.1-2003

Information and Documentation - Record management - Part 1: General

52. SNI 19-6964.5-2003

Seawater quality - Part 5: Sulphates (SO4=) testing methods with gravimetric analysis

53. SNI 19-6964.6-2003 Seawater quality Part 6: Cyanides (CN-) testing methods with 4- phyridine acid carboxylic-pyrazolones by way of spectrophotometry

54. SNI 19-6964.7-2003

Seawater quality - Part 7: Nitrates (NO3-N) with cadmiun reduction by way of spectrophotometry

55. SNI 01-6233.4-2003

Extension seeds of rice seeds 56. SNI 01-6234.1-2003

Breeder seeds of soya (glicinemax)

57. SNI 01-6234.2-2003

Foundation seeds of soya (glicine max)

58. SNI 01-6234.3-2003

Stock seeds of soya (glicine max)

59. SNI 01-6234.4-2003

Extension seeds of soya (glycine max)

60. SNI 04-6292.2-41-2003

Safety ansimilar electric pumps 61. SNI 01-6944-2003

Hybrid corn (zea mays) seeds 62. SNI 01-5007.1-2003

Teakwood logs - Part 1

M A L A Y S I A

(June 2003 – January 2004)

APPROVED ON 30 JUNE 2003

New Malaysian Standards 1. MS 1587:2003

Microbiological examination of beverage and beverage products – The enumeration of micro-organisms (Colony count technique at 30°C)

2. MS 1588:2003

Microbiological examination of beverage and beverage products – The enumeration of coliforms (Most probable number technique)

3. MS 1589:2003

Microbiological examination of beverage and beverage products – The enumeration of yeast and moulds (Colony count technique at 25 °C)

4. MS 133: Part F10:2003

Methods of test for paints and varnishes: Part F10: Determination of resistance to cathodic disbonding of coatings for use in marine environments

5. MS 133: Part F11:2003

Methods of test for paints and varnishes: Part F11: Determination of resistance to cathodic disbonding of coatings for use in land-based buried structures

6. MS 133: Part F12:2003

Methods of test for paints and varnishes: Part F12: Determination of resistance to neutral salt spray (fog)

7. MS 133: Part F13:2003

Methods of test for paints and varnishes: Part F13: Determination of resistance to filiform corrosion on steel substrates

8. MS 133: Part F14:2003

Methods of test for paints and varnishes: Part F14: Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation

9. MS 133: Part F15:2003


standards update

Methods of test for paints and varnishes: Part F15: Determination of resistance to humidity (intermittent condensation)

10. MS 133: Part F16:2003

Methods of test for paints and varnishes: Part F16: Exposure of coatings to artificial weathering - Exposure to fluorescent UV and water

11. MS 133: Part F17:2003

Methods of test for paints and varnishes: Part F17: Determination of wet-scrub resistance and cleanability of coatings

12. MS 133: Part F18:2003

Methods of test for paints and varnishes: Part F18: Determination of resistance to corrosion under a wet (salt fog)/dry/humidity cycle

13. MS 1590:2003

Carbon dioxide extinguishing systems – Design and installation

14. MS ISO 1502:2003

ISO general purpose metric screw threads – Gauges and gauging

15. MS ISO 965-5:2003 ISO general purpose metric screw threads – Tolerances – Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position H before galvanizing

16. MS ISO 965-4:2003

ISO general purpose metric screw threads – Tolerances – Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

17. MS ISO 965-3:2003

ISO general purpose metric screw threads – Tolerances – Part 3: Deviations for constructional screw threads

18. MS ISO 14567:2003

Personal protective equipment for protection against falls from

a height - Single point anchor devices

19. MS ISO 10333-1:2003

Personal fall-arrest systems Part 1: Full-body harnesses

20. MS ISO 10333-2:2003 Personal fall-arrest systems Part 2: Lanyards and energy absorbers

21. MS ISO 10333-3:2003

Personal fall-arrest systems - Part 3: Self-retracting lifelines

22. MS ISO 4007:2003

Personal eye-protectors - Vocabulary

23. MS ISO 4849:2003

Personal eye-protectors – Specifications

24. MS ISO 4850:2003

Personal eye-protectors for welding and related techniques - Filters - Utilisation and transmittance requirements

25. MS ISO 4851:2003

Personal eye-protectors - Ultra-violet filters – Utilisation and transmittance requirements

26. MS ISO 4852:2003

Personal eye-protectors – Infra-red filters – Utilisation and transmittance requirements

27. MS ISO 4854:2003

Personal eye-protectors – Optical test methods

28. MS ISO 4855:2003

Personal eye–protectors – Non-optical test methods

29. MS ISO 4856:2003

Personal eye-protectors - Synoptic tables of requirements for oculars and eye-protectors

30. MS ISO 6161:2003

Personal eye–protectors – Filters and eye-protectors against laser radiation

31. MS 1398: Part 4:2003 Specification for mosquito electric vapourising liquid: Part 4: Method for the evaluation of biological efficacy – Peet grady chamber method

32. MS 1595: Part 1:2003

Maximum road speed limiter for land based motor vehicles: Part 1: Specification for perfo-rmance, installation and marking requirements

33. MS 1595: Part 2:2003 Maximum road speed limiter for land based motor vehicles: Part 2: Specification for system and component requirements

34. MS 1596:2003

Determination of concentration and mass flow of particulate matter in flue gas for stationary source emissions

35. MS ISO 186:2003

Paper and board – Sampling to determine average quality (Supersedes MS 9:1989)

36. MS ISO 2596:2003 Iron ores – Determination of hygroscopic moisture in analytical samples – Gravimetric and Karl Fischer methods

37. MS ISO 5446:2003

Ferromanganese – Specification and conditions of delivery (Supersedes MS 842:1983)

38. MS ISO 3713:2003

Ferroalloys – Sampling and preparation of samples – General rules (Supersedes MS 843:1983)

39. MS ISO 4552-1:2003

Ferroalloys - Sampling and sample preparation for chemical analysis – Part 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese (Supersedes MS 843:1983)

40. MS ISO 4159:2003 Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method

41. MS ISO 4158:2003

Ferrosilicon, ferrosilicomanganese and ferrosilicochromium – Determination of silicon content – Gravimetric method

42. MS ISO 740:2003


standards update

Sodium carbonate for industrial use – Determination of total soluble alkalinity – Titrimetric method

43. MS ISO 1552:2003 Liquid chlorine for industrial use – Method of sampling (for determining only the volumetric chlorine content)

44. MS ISO 2120:2003

Liquid chlorine for industrial use – Determination of the content of chlorine by volume in the vaporized product

45. MS ISO 2121:2003

Liquid chlorine for industrial use – Determination of water content – Gravimetric method

46. MS ISO 2831:2003

Sodium fluoride for industrial use – Determination of water-insoluble matter

47. MS ISO 2832:2003 Sodium fluoride for industrial use – Determination of moisture content

48. MS ISO 2833:2003

Sodium fluoride for industrial use – Determination of fluorine content – Modified Willard-Winter method

49. MS ISO 5993:2003

Sodium hydroxide for industrial use – Determination of mercury content – Flameless atomic absorption spectrometric method

50. MS ISO 11609:2003

Dentistry – Toothpastes – Requirements, test methods and marking

(Supersedes MS 527:1986) 51. MS ISO 11784:2003

Radio-frequency identification of animals – Code structure

52. MS ISO 11785:2003

Radio-frequency identification of animals – Technical concept

Revised Malaysian Standard 1. MS 1000:2003

Specification for soya bean milk and drink (First revision)

2. MS 1398: Part 1:2003

Specification for mosquito electric vapourising liquid: Part 1: Physical and chemical requirements (First revision)

3. MS 1398: Part 2:2003

Specification for mosquito electric vapourising liquid: Part 2: Method for the evaluation of biological efficacy – Glass chamber method (First revision)

4. MS 1398: Part 3:2003

Specification for mosquito electric vapourising liquid: Part 3: Method of the evaluation of biological efficacy – Glass cylinder method (First revision)

5. MS 23: Part 2:2003

Specification for mosquito coil: Part 2: Method for the evaluation of biological efficacy – Glass chamber method (Second revision)

6. MS 828:2003

Specification for rear marking plates for vehicles (First revision)

7. MS 1175:2003

Specification for seat belts for motor vehicles (Second revision)

8. MS 474: Part 1:2003

Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 1: Specific gravity (First revision)

(Supersedes MS 474:1976) 9. MS 474: Part 2:2003

Method of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 2: Rockwell hardness test (First revision)

(Supersedes MS 474:1976) 10. MS 595: Part 2:2003

Specification for safety-glass pane for motor vehicles: Part 2: Methods of test (Second revision)

Reconfirmed Malaysian Standard

1. MS 1403:1996

Specification for electricity generating sets – Portable (up to 5 kW)

2. MS 485: Part 4:1976

Glossary of packaging terms: Part 4: Paper and board packaging

3. MS 286:1975

Specification for kraft paper, wrapping (unbleached and untreated)

4. MS 1080:1987

Method of test for determination of total non-ionic detergent by Batch Technique.

Withdrawal of Malaysian Standard

1. MS 1000:1986

Specification for soya bean milk and drink

2. MS 9:1989

Method of sampling to determine average quality of paper and board (First revision)

3. MS 842:1983

Specification for ferromanganese

4. MS 843:1983

Method of sampling ferrosilicon and ferromanganese for determination of ferrosilicon and ferromanganese for determination of chemical composition

5. MS 527:1986 Specification for toothpaste 6. MS 474:1976

Methods of test for brake lining materials

APPROVED ON 28 JULY 2003

New Malaysian Standards 1. MS ISO 8302:2003

Thermal insulation – Determination of steady-state thermal resistance and related properties – Guarded hot plate apparatus

2. MS IEC 60115-1:2003


standards update

Fixed resistors for use in electronic equipment – Part 1: Generic specification

3. MS IEC 60062:2003

Marking codes for resistors and capacitors

4. MS 1291:2003

Single-use sterile rubber surgical gloves – Specification

5. MS 1155:2003

Single-use medical examination gloves – Specification

Revised Malaysian Standard 1. MS 522: Part 1:2003

Portland cement (Ordinary and rapid-hardening): Part 1: Specification (Second revision)

2. MS 113:2003

Natural latex rubber condoms – Requirements and test methods (Second revision) (ISO 4074:2002, MOD)

Confirmation of Malaysian Standard

1. MS ISO 10202: Part 1:1995

Financial transaction cards – Security architecture of financial transaction systems using integrated circuit cards: Part 1: Card life cycle

2. MS ISO 1208:1996

Information and documentation – Electronic manuscript preparation and mark up

3. MS ISO/IEC 2382-23:1996

IT – Vocabulary: Part 23: Text processing

4. MS ISO/IEC 8802-6:1996

IT – Telecommunication and information exchange between systems – Local and metropolitan area networks: Part 6: Distributed Queue Dual Bus (DQDB) access method and physical layer specifications

5. MS ISO/IEC 9637-1:1996

IT – Computer graphics – Interfacing techniques for dialogues with graphical devices (CGI) – Data stream

binding: Part 2: Character encoding

6. MS ISO/IEC 9637-2:1996

IT - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Data stream binding: Part 2: Binary encoding

7. MS ISO/IEC 9646-1:1996

IT – OSI - Conformance testing methodology and framework: Part 1: General concepts

8. MS ISO/IEC 9646-2:1996

IT - OSI - Conformance testing methodology and framework: Part 2: Abstract test suite specification

9. MS ISO/IEC 9646-4:1996

IT – OSI - Conformance testing methodology and framework: Part 4: Test realization

10. MS ISO/IEC 9646-5:1996

IT - OSI - Conformance testing methodology and framework: Part 5:Requirements on test laboratories and clients for the conformance assessment process

11. MS ISO/IEC 9646-6:1996

IT – OSI - Conformance testing methodology and framework: Part 6: Protocol profile test specification

12. MS ISO/IEC 9834-1:1996

IT – OSI - Procedures for the operation of OSI registration authorities: Part 1: General procedures

13. MS ISO/IEC 9834-2:1996

IT – OSI - Procedures for the operation of OSI registration authorities: Part 2: Registration procedures for OSI document types

14. MS ISO/IEC 9834-4:1996

IT – OSI - Procedures for the operation of OSI registration authorities: Part 4: Register of VTE profiles

15. MS ISO/IEC 9834-5:1996

IT – OSI - Procedures for the operation of OSI registration authorities: Part 5: Register of VT control object definitions

16. MS ISO/IEC 9834-6:1996

IT – OSI - Procedures for the operation of OSI registration authorities: Part 6: Application processes and application entities

17. MS ISO/IEC 10165-4:1996

Information technology - Open systems interconnection - Management information services - Structure of information management: Part 4: Guidelines for the definition of managed objects

18. MS ISO/IEC 10165-5:1996

Information technology - Open systems interconnection - Management information services - Structure of information management: Part 5: Generic management information

19. MS ISO/IEC 10177:1996

Information technology - Telecommunications and information exchange between systems; provision of the connection -mode network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 packet layer protocol

20. MS ISO/IEC 10183-1:1996

Information technology - Text and office systems - Office document architecture (ODA) and interchange format - Technical report on ISO 8613 implementation testing: Part 1: Testing methodology

21. MS ISO/IEC 10183-2:1996 Information technology - Text and office systems - Office document architecture (ODA) and interchange format - Technical report on ISO 8613 implementation testing: Part 2: Framework for abstract test cases

22. MS ISO 10202-6:1996

Financial transaction cares - Security architecture of financial transaction systems using integrated circuit cards: Part 6: Cardholder verification

23. MS ISO/IEC 10206:1993

Information technology - Programming languages - Extended Pascal

24. MS ISO/IEC ISP 10609-1:1996


standards update

Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 1: Sub-network-type independent requirements for group TB

25. MS ISO/IEC ISP 10609-2:1996

Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 2: Sub-network-type independent requirements for group TC

26. MS ISO/IEC ISP 10609-3:1996

Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 3: Sub-network-type independent requirements for group TD

27. MS ISO/IEC ISP 10609-4:1996

Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 4: Sub-network-type independent requirements for group TD

28. MS ISO/IEC ISP 10609-5:1996

Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 5: Definition of profiles TB1111/’TB1121

29. MS ISO/IEC ISP 10609-6:1996

Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 6: Definition of profiles TC1111/TC1121

30. MS ISO/IEC ISP 10609-7:1996

Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 7: Definition of profiles TD1111/TD1121

31. MS ISO/IEC ISP 10609-8:1996

Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode

network service: Part 8: Definition of profiles TE1111/TE1121

32. MS ISO/IEC ISP 10609-9:1996

Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 9: Sub-network-type dependent requirements for network layer, data link layer and physical layer concerning permanent access to a packet switched data networking using virtual calls

33. MS ISO/IEC ISP 10609-10:1996

Information technology – ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 10: LAN sub-network- dependent, media-independent requirements

34. MS ISO/IEC ISP 10609-11:1996

Information technology – ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 11: CSMA/CD sub-network- dependent, media-dependent requirements

35. MS ISO/IEC ISP 10609-12:1996

Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 12: Definition of profile TC51, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a CSMA/CD LAN

36. MS ISO/IEC ISP 10609-14:1996

Information technology - ISP TB, TC, TD and TE - Connection-mode transport service over connection-mode network service: Part 14: Definition of profile TC53, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a token ring LAN

37. MS ISO/IEC ISP 10613-1:1996

Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 1: Sub-network independent requirements

38. MS ISO/IEC ISP 10613-2:1996

Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 2: LAN sub-network-independent, media- independent requirements

39. MS ISO/IEC ISP 10613-3:1996

Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 3: CSMA/CD LAN sub-network-independent, media-dependent requirements

40. MS ISO/IEC ISP 10613-5:1996

Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 5: Definition of profile RA51.51, relaying the connectionless-mode network service between CSMA/CD LAN sub-networks

41. MS ISO/IEC ISP 10613-7:1996

Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 7: PSDN sub-network-dependent, media-dependent requirements for virtual calls over a permanent access

42. MS ISO/IEC ISP 10613-8:1996

Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 8: Definition of profile RA51.1111, relaying the connectionless-mode network service between CSMA/CD LAN sub-networks and PSDNs using virtual calls over a PSTN leased line permanent access

43. MS ISO/IEC ISP 10613-9:1996

Information technology - International standardised profile RA - Relaying the connectionless-mode network service: Part 9: Definition of profile RA51.1121, relaying the


standards update

connectionless-mode network service between CSMA/CD LAN sub-networks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access

44. MS ISO/IEC 10739-1:1996 Information technology - OSI - Conformance test suite for ISO 9041-1, Virtual terminal basic class protocol: Part 1: Test suite structure and test purpose

45. MS ISO/IEC 10742:1996

Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI data link layer standards

46. MS ISO/IEC 11579-1:1996

Information technology - Telecommunication and information exchange between systems - Private integrated service network: Part 1: Reference configuration for PISN exchanges (PINX) specifications

47. MS ISO/IEC 12075:1996

Information technology - Customer premises cabling - Planning and installation guide to support ISO/IEC 8802-5 token ring stations

48. MS ISO/IEC 13213:1996

Information technology - Microprocessor systems - Control and status register (CSR) architecture for microcomputer buses

49. MS ISO/IEC 15802-4:1996

Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Common specifications: Part 4: System local protocol


1. MS 826: Part 15: 1989

Specification for information processing – Vocabulary: Part 15: Programming languages

2. MS 1298:1992

Information processing systems computer graphics Graphical kernel systems (GKS) functional description

3. MS ANSI/IEEE STD 960:1995

Fast bus modular high-speed data acquisition and control system

4. MS ISO/IEC 9282: Part 2:1995

Information processing – Coded representation of pictures incremental encoding of point lists in a 7-bit or 8-bit environment

5. MS ISO 2382: Part 11:1995

Information processing systems – Vocabulary: Part 11: Processing units

APPROVED ON 10 SEPTEMBER 2003 New Malaysian Standards 1. MS ISO/IEC Guide 50:2003

Child safety and standards – General guidelines

2. MS ISO 11540:2003

Caps for writing and marking instruments intended for use by children up to 14 years of age – Safety requirements

3. MS ISO 8317:2003

Child-resistant packaging – Requirements and testing procedures for reclosable packages

4. MS ISO 8098:2003

Cycles – Safety requirements for bicycles for young children

5. MS ISO 9177-1:2003

Mechanical pencils – Part 1: Classification, dimensions, performance requirements and testing

6. MS ISO 9177-2:

Mechanical pencils – Part 2: Black leads – Classification and dimensions

7. MS ISO 9177-3:

Mechanical pencils – Part 3: Black leads – Bending strength of HB leads

8. MS ISO 9175-1:

Tubular tips for hand-held technical pens using India ink on tracing paper – Part 1: Definitions, dimensions, designations and marking

9. MS ISO 9180:

Black leads for wood-cased pencils – Classification and diameters

10. MS ISO 14145:

Roller ball pens and refills – Part 1: General use

11. MS 1564:Part 1:2003

Mobile waste containers: Part 1: Containers with two wheels, with a capacity from 80 L to 390 L for comb lifting devices – Dimensions and design

12. MS 1564: Part 2:2003

Mobile waste containers: Part 2: Containers with four wheels, with a capacity from 500 L to 1 200 L with flat lid(s), for trunnion and/or comb lifting devices – Dimensions and design

13. MS 1704: Part 1:2003

High-yield strength flat steel products: Part 1: General requirements

14. MS 1705:2003

Hot-rolled carbon steel strip and sheet of commercial and drawing qualities

15. MS 1704: Part 2:2003

High-yield strength flat steel products: Part 2: Products supplied in the normalized or thermal mechanical controlled rolling

16. MS ISO 7858-1:2003

Measurement of water flow in closed conduits – Combination meters for cold potable water – Part 1: Specification

17. MS ISO 7858-2:2003

Measurement of water flow in closed conduits – Combination meters for cold potable water – Part 2: Installation

18. MS ISO 7858-3:2003

Measurement of water flow in closed conduits – Combination meters for cold potable water – Part 3: Test methods


standards update

Revised Malaysian Standard 3. MS 555: Part 1:2003

Fire dampers: Part 1: Specification (Second revision) (Replaces MS 555:1985)

4. MS 555: Part 2:2003

Fire dampers: Part 1: Installation (Second revision) (Replaces MS 555:1985)


1. MS 400: Part 1: Group 01:1989

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunication and electronics: Group 01: Fundamental terminology (First revision)

2. MS 400: Part 1: Group 02:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 02: General technological terminology

3. MS 400: Part 1: Group 03:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 03: Relay terminology

4. MS 400: Part 1: Group 04:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 04: Measurement terminology

5. MS 400: Part 1: Group 05:

Section 1:1977 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 05: Semiconductor terminology: Section 1: Semiconductor material (First revision)

6. MS 400: Part 1: Group 05: Section 2:1977 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 05: Semiconductor terminology: Section 2: Semiconductor devices

7. MS 400: Part 1: Group 06:

Section 1:1976 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 06: Electronic tube terminology: Section 1: General

8. MS 400: Part 1: Group 06:

Section 2 & 3:1976 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 06: Electronic tube terminology: Section 2: Construction: Section 3: Types of tube

9. MS 400: Part 1: Group 06: Section 4:1978 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunications and electronics: Group 06: Electronic tube terminology: Section 4: Properties and quantities

10. MS 400: Part 1: Group 08:1982

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 1: Terms common to power, telecommunication and electronics: Group 08: Piezo-electric device terminology

11. MS 400: Part 2: Group 01:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 01: General power terminology

12. MS 400: Part 2: Group 02:

Section 1,2,3,4:1979

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group: Static convertor terminology: Section 1: General terms; Section 2: Terms applicable to various parts of asymmetrically conducting devices; Section 3: Terms applicable to components of static convertor circuit: Section 4: Terms applicable to the arrangement of static convertor circuits

13. MS 400: Part 2: Group 02:

Section 5,6, & 7:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 02: Static convertor terminology: Section 5: Terms applicable to the electrical operation of static convertors: Section 6: Terms applicable to cooling methods: Section 7: Terms applicable to rating system

14. MS 400: Part 2: Group 03:

Section 2:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 03: Rotating machinery terminology: Section 2: Winding, magnetic and electrical parts

15. MS 400: Part 2: Group 03:

Section 1:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 03: Rotating machinery terminology: Section 1: Machines

16. MS 400: Part 2: Group 03:

Section 3:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 03: Rotating machinery terminology: Section 3: Mechanical parts

17. MS 400: Part 2: Group 04:1976


standards update

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2:Terms particular to power engineering: Group 04: Transformer terminology: Section 3: Mechanical parts

18. MS 400: Part 2: Group 05:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 05: Voltage fluctuation terminology

19. MS 400: Part 2: Group 06:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 06: Switchgear and controlgear terminology (including fuse terminology)

20. MS 400: Part 2: Group 07:1979

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 07: Tariffs terminology

21. MS 400: Part 2: Group 08:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 2: Terms particular to power engineering: Group 08: Power cable terminology

22. MS 400: Part 3: Group 01:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 01: General telecommunications and electronics terminology

23. MS 400: Part 3: Group 02:

Section 1 & 2:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 02: Telephony terminology: Section 1: Subscribers' stations and equipment: Section 2: Exchanges and positions

24. MS 400: Part 3: Group 02:

Section 3 & 4:1979

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 02: Telephony terminology: Section 3: Exchanges equipment: Section 4: Repeater stations

25. MS 400: Part 3: Group 02:

Section 5:1979 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 02: Telephony terminology: Section 5: Systems and circuits

26. MS 400: Part 3: Group 03: 1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 03: Telegraphy, including facsimile terminology

27. MS 400: Part 3: Group 04:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 04: Broadcasting, radio and television terminology

28. MS 400:Part 3: Group 05:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 05: Propagation and media terminology

29. MS 400:Part 3: Group 06:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunication and electronics: Group 06: Radio location and navigation terminology

30. MS 400:Part 3: Group 07:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular

to telecommunication and electronics; Group 07: Radio communication terminology

31. MS 400: Part 4: Group 01:1976

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 4: Terms particular to lighting and colour: Group 01: Radiation and photometry

32. MS 400: Part 4: Group 02:1977

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 4: Terms particular to lighting and colour: Group 02: Vision and colour terminology

33. MS 400: Part 4: Group 03:1977

Glossary of electrotechnical, power telecommunication, electronics, lighting and colour terms: Part 4: Terms particular to lighting and colour: Group 03: Lighting technology terminology

34. MS 400: Part 3: Group 09:1986

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunications and electronics: Group 09: Waveguide terminology

35. MS 400: Part 3: Group 10:1986

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms: Part 3: Terms particular to telecommunication and electronics: Group 10: Recording and reproduction of sound and video terminology

36. MS 433:1976 Specification for separators for

lead acid batteries 37. MS 438:1976 Specification for stationary

batteries 38. MS 649: Part 1:1982 Glossary of terms used in the

petroleum industry: Part 1 39. MS 649: Part 2:1980 Glossary of terms used in the

petroleum industry: Part 2


standards update

APPROVED ON 07 OCTOBER 2003

New Malaysian Standards

1. MS 1706:2003 Test method for ash content of

engine coolants and antirusts 2. MS 1707:2003

Test method for relative density of engine coolant concentrates and engine coolants by the hydrometer

3. MS 1708:2003 Test method for corrosion test

for engine coolants 4. MS 1709:2003 Terminology for engine coolants 5. MS 1710:2003 Test method for trace chloride

ion in engine coolants 6. MS 1711: Part 1:2003 Furniture – Office chair

(adjustable): Part 1: Dimensions – Determination of dimensions

7. MS 1711: Part 2:2003 Furniture – Office chair

(adjustable) – Part 2: Safety requirements

8. MS 1711: Part 3:2003 Furniture – Office chair

(adjustable) – Part 3: Safety test methods

9. MS 1712:2003

Electrical apparatus for explosive gas atmospheres – Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents

10. MS 1713:2003

Electrical apparatus for explosive gas atmospheres – Construction and use of rooms or buildings protected by pressurisation

11. MS 1597: Part 2-75:2003

Household and similar electrical appliances: Part 2-75: Particular requirements for commercial dispensing appliances and vending machines

12. MS 1597: Part 2-73:2003

Household and similar electrical appliances – Safety – Part 2-73: Particular requirements for fixed immersion heaters

13. MS 1597: Part 2-6:2003

Household and similar electrical appliances – Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances (First revision)

14. MS 1597: Part 2-43:2003

Household and similar electrical appliances – Safety - Part 2-43: Particular requirements for clothes dryers and towel rails

15. MS 1597: Part 2-54:2003

Household and similar electrical appliances – Safety – Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam

16. MS 1597: Part 2-84:2003

Household and similar electrical appliances – Safety - Part 2-84: Particular requirements for toilets

17. MS ISO 2871-1:2003

Surface active agents – Detergents – Determination of cationic-active matter content – Part 1: High-molecular-mass cationic-active matter

18. MS ISO 2871-2:2003

Surface active agents – Detergents – Determination of cationic-active matter content – Part 2: Cationic-active matter of low molecular mass (between 200 and 500)

19. MS ISO 2271:2003

Surface active agents – Detergents – Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure

20. MS ISO 7345:2003 Thermal insulation – Physical

quantities and definitions 21. MS ISO 9251:2003 Thermal insulation – Heat

transfer conditions and

properties of materials - Vocabulary

22. MS ISO 9288:2003

Thermal insulation – Heat transfer by radiation – Physical quantities and definitions

23. MS IEC 60335-2-101:2003

Household and similar electrical appliances – Safety – Part 2-101: Particular requirements for vaporizers

24. MS IEC 60269-2-1:2003

Low-voltage fuses – Part 2-1: Supplementary requirements for fuses for use by authorized persons (Fuses mainly for industrial application) – Section I to VI: Examples of types of standardized fuses

25. MS IEC 61009-1:2003

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCB0s) – Part 1: General rules

26. MS IEC 61009-2-1:2003

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) – Part 2-1: Applicability of the general rules to RCBO’s functionally independent of line voltage

27. MS IEC 61009-2-2:2003

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCBOs) – Part 2-2: Applicability of the general rules to RCBO’s functionally dependent on line voltage

28. MS IEC 61000-4-15:2003

Electromagnetic compatibility (EMC) – Part 4: Testing and measurement techniques – Section 15: Flickermeter – Functional and design requirements

29. MS IEC 60335-2-42:2003

Safety of household and similar electrical appliances: Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection oven


standards update

30. MS IEC 60439-1:2003 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies

31. MS IEC 60439-3:2003

Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards

32. MS IEC 60079-4:2003

Electrical apparatus for explosive gas atmospheres – Part 4: Method of test forignition temperature

33. MS IEC 61000-4-7:2003

Electromagnetic compatibility (EMC) – Part 4-7: Testing and measurement techniques – General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

34. MS IEC 61000-2-12:2003

Electromagnetic compatibility (EMC) – Part 2-12: Environment – Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems

35. MS IEC 60335-2-98:2003

Household and similar electrical appliances – Safety - Part 2-98: Particular requirements for humidifier

36. MS IEC 60335-2-97:2003

Household and similar electrical appliances – Safety – Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment

37. MS IEC 60335-2-95:2003

Household and similar electrical appliances – Safety – Part 2-95: Particular requirements for vertically moving garage doors for residential use

38. MS IEC 60335-2-85:2003

Household and similar electrical appliances – Safety - Part 2-85: Particular requirements for fabric steamer

39. MS IEC 60335-2-78:2003

Household and similar electrical appliances – Safety - Part 2-78: Particular requirements for outdoor barbecues

40. MS IEC 60335-2-55:2003

Household and similar electrical appliances – Safety – Part 2-55: Particular requirements for electric appliances for use with aquariums and garden ponds

41. MS IEC 60335-2-53:2003

Household and similar electrical appliances – Safety - Part 2-53: Particular requirements for sauna heating appliances

42. MS IEC 60335-2-45:2003

Household and similar electrical appliances – Safety – Part 2-45: Particular requirements for portable heating tools and similar appliances (First revision)

43. MS IEC 60335-2-41:2003

Household and similar electrical appliances – Safety – Part 2-41: Particular requirements for electric pumps

44. MS IEC 60335-2-31:2003

Household and similar electrical appliances – Safety – Part 2-31: Particular requirements for range hood

45. MS IEC 60335-2-23:2003

Household and similar electrical appliances – Safety – Part 2-23: Particular requirements for appliances for skin or hair care (First revision)

46. MS IEC 60335-2-12:2003

Household and similar electrical appliances – Safety – Part 2-12: Particular requirements for warming plates and similar appliances

47. MS IEC 60335-2-11:2003

Household and similar electrical appliances – Safety – Part 2-11: Particular requirements for tumble dryers (First revision)

48. MS IEC 60335-2-14:2003 Household and similar electrical appliances – Safety – Part 2-14: Particular requirements for kitchen machines (First revision)

49. MS IEC 60335-2-26:2003

Household and similar electrical appliances – Safety – Part 2-26: Particular requirements for clocks (First revision)

50. MS IEC 60335-2-28:2003

Household and similar electrical appliances – Safety – Part 2-28: Particular requirements for sewing machines (First revision)

51. MS IEC 60335-2-74:2003

Household and similar electrical appliances – Safety - Part 2-74: Particular requirements for portable immersion heaters (First revision)

52. MS IEC 60898-2:2003

Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 2: Circuit-breakers for a.c. and d.c. operation (First revision)

53. MS IEC 60898-1:2003

Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 1: Circuit-breakers for a.c. operation (First revision)

54. MS IEC 60264-4:2003

Low-voltage fuses – Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices

55. MS IEC 61347-2-5:2003

Lamp controlgear - Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting

56. MS IEC 61347-2-6:2003

Lamp controlgear - Part 2-6: Particular requirements for d.c. supplied electronic ballasts for aircraft lighting

57. MS IEC 61347-2-7:2003

Lamp controlgear - Part 2-7: Particular requirements for d.c.


standards update

supplied electronic ballasts for emergency lighting

58. MS IEC 61347-2-8:2003 Lamp controlgear - Part 2-8:

Particular requirements for ballasts for fluorescent lamps

59. MS IEC 61347-2-9:2003

Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)

60. MS IEC 61347-2-10:2003

Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)

61. MS 60081:2003 Double-capped fluorescent

lamps - Performance specifications

62. MS IEC 60925:2003

DC supplied electronic ballasts for tubular fluorescent lamps – Performance requirements

63. MS IEC 61347-1:2003 Lamp controlgear - Part 1:

General and safety requirements

64. MS IEC 61347-2-1:2003

Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)

65. MS IEC 61347-2-2:2003

Lamp controlgear - Part 2-2: Particular requirements for d.c. and a.c. supplied electronic step-down convertors for filament lamps

66. MS IEC 61347-2-3:2003

Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps

67. MS IEC 61347-2-4:2003

Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting

68. MS IEC 60335-2-32:2003

Household and similar electrical appliances – Safety - Part 2-32: Particular requirements for massage appliances (First revision)

69. MS IEC 60335-2-51:2003 Household and similar electrical appliances – Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations

70. MS IEC 60335-2-82:2003

Household and similar electrical appliances – Safety - Part 2-82: Particular requirements for amusement machines and personal service machines

71. MS IEC 60335-2-29:2003

Household and similar electrical appliances – Safety – Part 2-29: Particular requirements for battery chargers (First revision)

72. MS ISO 898-1:2003

Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs

73. MS ISO 898-2:2003

Mechanical properties of fasteners – Part 2: Nuts with specified proof load values – Coarse thread

74. MS ISO 898-5:2003

Mechanical properties of fasteners made of carbonsteel and alloy steel – Part 5: Set screws and similar threaded fasteners not under tensile stresses

75. MS ISO 898-6:2003

Mechanical properties of fasteners – Part 6: Nuts with specified proof load values – Fine pitch thread

76. MS ISO 898-7:2003

Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

77. MS ISO 3183-1:2003

Petroleum and natural gas industries – Steel pipe for pipelines – Technical delivery conditions – Part 1: Pipes of requirement class A

78. MS ISO 3183-2:2003

Petroleum and natural gas industries – Steel pipe for pipelines – Technical delivery

conditions – Part 2: Pipes of requirement class B

79. MS ISO 3183-3:2003

Petroleum and natural gas industries – Steel pipe for pipelines – Technical delivery conditions – Part 3: Pipes of requirement class C

80. MS ISO 14532:2003 Natural gas - Vocabulary

Revised Malaysian Standard

1. MS 830:2003

Code of practice for the storage, handling and transportation of liquefied petroleum gases (Second revision)

Confirmation of Malaysian Standard

1. MS 284:1975 Specification for carbon paper,

handwriting 2. MS 285:1975 Specification for paper

(duplicating, copy, liquid process)

3. MS 333:1976 Specification for stencil paper

(duplicating machine, dry process)

4. MS 398:1976 Specification for corrugated

fibreboard boxes 5. MS 430:1976 Specification for ink paste, black

(stencil, duplicating – machine) 6. MS ISO 11210:1997

Determination of platinum in platinum jewellery alloys – Gravimetric method after precipitation of diammonium hexachloroplatinate


1. MS 764: Part 1:1982 Specification for fixed resistors:

Part 1: Terms and methods of test

2. MS 764: Part 3: Type 1:1982


standards update

Standard for fixed resistors: Part 3: Wirewound resistors: Type 1: Selection of methods of test and general requirements

3. MS 767:1982

Standard for marking codes for resistors and capacitors

4. MS IEC 60898:1998

Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations (MCB’s)

5. MS 472: Part 2: Sec 2.11:1987

Specification for testing and approval of household and similar appliances: Part 2: Section 2.11: Floor treatment and wet scrubbing machines for household and similar purposes

6. MS IEC 60364-2-21:1996

Electrical installations of buildings: Part 2: Definitions: Chapter 21: Guide to general terms

7. MS IEC 60364-3: 1996 Electrical installations of

buildings: Part 3: Assessment of general characteristic

8. MS IEC 60364-4-41:1996

Electrical installations of buildings: Part 4-41: Protection for safety: Protection against electric shock

9. MS IEC 60364-4-42:1996

Electrical installations of buildings: Part 4-42: Protection for safety: Protection against thermal effects

10. MS IEC 60364-4-442:1996

Electrical installations of buildings: Part 4-442: Protection against overvoltages – Section 442: Protection of low-voltage installations against faults between high-voltage systems and earth

11. MS IEC 60364-4-443:1996

Electrical installations of buildings: Part 4-443: Protection against overvoltages – Section 443: Protection against overvoltages of atmospheric origin or due to switching

12. MS IEC 60364-4-45:1996

Electrical installations of buildings: Part 4: Chapter 45: Protection against undervoltage

13. MS IEC 60364-4-46:1996

Electrical installations of buildings: Part 4: Protection for safety: Chapter 46: Isolation and switching

14. MS IEC 60364-4-47:1996

Electrical installations of buildings: Part 4: Protection for safety: Chapter 47: Application of protective measures for safety: Section 470: General: Section 471: Measures of protection against electric shock

15. MS IEC 60364-4-473:1996 Electrical installations of buildings: Part 4: Protection for safety: Section 473: Measures of protection against overcurrent

16. MS IEC 60364-4-481:1996

Electrical installations of buildings: Part 4: Protection for safety: Chapter 48: Choice of protective measures as a function of external influences: Section 481: Selection of measures for protection against electric shock in relation to external influences

17. MS IEC 60364-4-482:1996

Electrical installations of buildings: Part 4: Protection for safety: Section 48: Choice of protective measures as a function of external influences: Section 482: Protection against fire

18. MS IEC 60364-5-51:1996

Electrical installations of buildings: Part 5-51: Selection and erection of electrical equipment - Common rules

19. MS IEC 60364-5-53:1996

Electrical installations of buildings: Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control

20. MS IEC 60364-5-56:1996 Electrical installations of

buildings: Part 5-56: Safety services

21. MS IEC 60364-6-61:1996

Electrical installations of buildings: Part 6: Verification: Chapter 61: Initial verification

22. MS IEC 60364-5-523:1996

Electrical installations of buildings: Part 5: Selection and erection of electrical equipment: Section 52: Wiring systems: Section 523: Current-carrying capacities

23. MS IEC 60364-5-537:1996

Electrical installations of buildings: Part 5: Selection and erection of electrical equipment: Chapter 53: Switchgear and controlgear: Section 537: Devices for isolation and switching

24. MS IEC 60364-7-702:1996

Electrical installations of buildings: Part 7: Requirements for special installations or locations: Section 702: Swimming pools and other basins

25. MS IEC 60364-7-704:1996

Electrical installations of buildings: Part 7-704: Requirements for special installations: Construction and demolition site installation

APPROVED ON 07 NOVEMBER 2003

New Malaysian Standards

1. MS 471: Part 2:2003

Glossary of terms related to timber and wood-based panel products: Part 2: Wood-based panel products

2. MS 471: Part 3:2003

Glossary of terms related to timber and wood-based panel products: Part 3: Carpentry, joinery and furniture

3. MS 1714:2003 Specification for visual strength

grading of tropical hardwood timber


Spesifikasi bagi timun (Ulangkaji kedua)

2. MS 951:2003


standards update

Spesifikasi bagi kacang panjang (Ulangkaji kedua)

3. MS 893:2003 Spesifikasi bagi tomato

(Ulangkaji kedua)

APPROVED ON 10 DECEMBER 2003

New Malaysian Standards 1. MS 1282: Part 9:2003

Food additives: Part 9: Emulsifiers

2. MS 1715:2003

Specification for chocolate and chocolate products

3. MS 1714:2003 Specification for visual strength

grading of tropical hardwood timber

4. MS 1717: Part 1:2003 Specification for diuron: Part 1:

Diuron technical 5. MS 1717: Part 2:2003 Specification for diuron: Part 2:

Diuron wettable powder 6. MS 1717: Part 3:2003 Specification for diuron: Part 3:

Diuron water-dispersible granules

7. MS 1717: Part 4: 2003 Specification for diuron: Part 4:

Suspension concentrate 8. MS 1718:2003 Sodium hypochlorite for use in

potable water supply – Specification

9. MS 1719:2003 Specification for raised

pavement markers (RPM) 10. MS 544: Part 10:2003

Code of practice for structural use of timber: Part 10: Preservative treatment of structural timber

11. MS 1720:2003 Welded carbon steel gas

cylinders – Periodic inspection and testing

12. MS 1721:2003 Structural steels – Plates, wide

flats and wide strips

13. MS 1722:2003 Occupational safety and health

management system - Guidelines

14. MS 1723: 2003

Performance evaluation of air pollution control and treatment systems: Mechanical dust collectors

15. MS ISO 5809:2003 Starches and derived products:

Determination of sulphated ash 16. MS ISO 1666:2003

Starches and derived products – Determination of moisture content – Oven-drying method

17. MS ISO 5381:2003

Starches and derived products - Determination of water content - Modified Karl Fischer method

18. MS ISO 11212-4:2003

Starches and derived products - Determination of cadmium content by atomic absorption spectrometry with electro-thermal atomization

19. MS ISO 10520:2003

Starches and derived products - Determination of starch content - Ewers polarimetric method

20. MS ISO 10504:2003

Starches and derived products - Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups - Method using high-performance liquid chromatography

21. MS ISO 11212-3:2003

Starches and derived products - Determination of lead content by atomic absorption spectrometry with electrothermal atomization

22. MS ISO 11212-2:2003

Starches and derived products - Determination of mercury content by atomic absorption spectrometry

23. MS ISO 11212-1:2003

Starches and derived products - Determination of arsenic

content by atomic absorption spectrometry

24. MS ISO 2837:2003 Graphic technology - Prints and

printing inks - Assessment of resistance to solvents

25. MS ISO 6486-1:2003

Ceramic ware, glass ceramic ware and glass dinnerware in contact with food – Release of lead and cadmium – Part 1: Test method

26. MS ISO 6486-2:2003

Ceramic ware, glass ceramic ware and glass dinnerware in contact with food – Release of lead and cadmium – Part 2: Permissible limits

27. MS ISO 4064-2:2003

Measurement of water flow in closed conduits – Meters for cold potable water – Part 2: Installation requirements and selection

28. MS ISO 4064-3:2003

Measurement of water flow in closed conduits – Meters for cold potable water – Part 3: Test methods and equipment

29. MS ISO 10385-1:2003

Measurement of water flow in closed conduits – Meters for hot water – Part 1: Specifications

30. MS ISO 4301-3:2003 Cranes – Classification – Part 3:

Tower Cranes 31. MS ISO 3155:2003 Stranded wire ropes for mine

hoisting – Fibre components – Characteristics and tests

32. MS ISO 4301-1:2003 Cranes and lifting appliances –

Classification – Part 1: General 33. MS ISO 3154:2003 Stranded wire ropes for mine

hoisting – Technical delivery requirements

34. MS ISO/IEC 14443-1:2003

Identification cards - Contactless integrated circuit(s) cards – Proximity cards - Part 1: Physical characteristics

35. MS ISO/IEC 14443-2:2003


standards update

Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 2: Radio frequency power and signal interface

36. MS ISO/IEC 14443-3:2003

Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 3: Initialization and anticollision

37. MS ISO/IEC 14443-4:2003

Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 4: Transmission protocol

38. MS ISO/IEC 12119:2003

Information technology - Software packages - Quality requirements and testing

39. MS ISO 19101:2003 Geographic information -

Reference model 40. MS ISO 19108:2003 Geographic information -

Temporal schema 41. MS ISO 19111:2003 Geographic information - Spatial

referencing by coordinates 42. MS ISO 19113:2003 Geographic information - Quality principles 43. MS ISO 19107:2003 Geographic information - Spatial schema 44. MS ISO 19115:2003 Geographic information -

Metadata referencing by coordinates

45. MS ISO/IEC 8802-2:2003

Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 2: Logical link control

46. MS ISO/IEC 8802-3:2003

Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method

and physical layer specifications

47. MS ISO/IEC 8802-11:2003

Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications

48. MS ISO/IEC 15802-2:2003

Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Common specifications - Part 2: LAN/MAN management

49. MS ISO/IEC 15802-3:2003

Information technology-Telecommunications and information exchange between systems - Local and metropolitan area networks - Common specifications - Part 3: Media access control (MAC) bridges

50. MS ISO/IEC 9594-4:2003 Information technology - Open systems interconnection - The directory: Procedures for distributed operation

51. MS ISO/IEC 8802 - 5:2003

Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 5: Token ring access method and physical layer specifications

52. MS ISO/IEC 10165-6:2003

Information technology - Open systems interconnection - Structure of management information: Requirements and guidelines for implementation conformance statement proformas associated with OSI management

53. MS ISO/IEC 11571:2003

Information technology - Telecommunications and information exchange between systems - Private integrated services networks – Addressing

54. MS ISO/IEC 11572:2003

Information technology - Telecommunications and information exchange between systems - Private integrated services network - circuit mode bearer services - Inter-exchange signalling procedures and protocol

55. MS ISO/IEC 11574:2003

Information technology -Telecommunications and information exchange between systems - Private integrated services network - Circuit-mode 64 kbit/s bearer services - Service description, functional capabilities and information flows

56. MS ISO/IEC 10611-4:2003

Information technology - International standardised profiles AMH1n - Message handling systems - Common messaging-Part 4:AMH12 and AMH14 - MTS access (P3) and MTS 94 access (P3)

57. MS ISO/IEC 10611-5:2003

Information technology - International standardised profiles AMH1n - Message handling systems - Common messaging - Part 5: AMH13 - MS access (P7)

58. MS ISO 10160:2003

Information and documentation - Open systems interconnection - Interlibrary - Loan application service definition

59. MS ISO/IEC 8632-3:2003

Information technology - Computer graphics - Metafile for the storage and transfer of picture description information - Part 3: Binary encoding (First revision)

60. MS ISO/IEC 8632-4:2003

Information technology - Computer graphics - Metafile for the storage and transfer of picture description information - Part 4: Clear text encoding (First revision)

61. MS ISO 13850:2003 Safety of machinery -

Emergency stop - Principles for design

62. MS ISO 13852:2003

Safety of machinery - safety distances to prevent danger


standards update

zones being reached by the upper limbs

63. MS ISO 13853:2003

Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs

64. MS ISO 13854:2003 Safety of machinery - Minimum

gaps to avoid crushing of parts of the human body

65. MS ISO 13856-1:2003

Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors

66. MS ISO 14122-2:2003

Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways

67. MS ISO 14122-3:2003

Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails

68. MS ISO 14123-2:2003 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures

69. MS ISO 13849-1:2003

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design

70. MS ISO 7250:2003 Basic human body

measurements for technological design

71. MS ISO 9355-1:2003

Ergonomic requirements for the design of displays and control actuators - Part 1: Human interactions with displays and control actuators

72. MS ISO 9355-2:2003

Ergonomic requirements for the design of displays and control actuators - Part 2: Displays

73. MS ISO 11064-1:2003

Ergonomic design of control centres - Part 1: Principles for the design of control centres

74. MS ISO 11064-2:2003

Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites

75. MS ISO 11064-3:2003 Ergonomic design of control

centres - Part 3: Control room layout

76. MS ISO 11226:2003 Ergonomics - Evaluation of

static working postures 77. MS ISO 15534-1:2003

Ergonomic design for the safety of machinery - Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery

78. MS ISO 15534-2:2003

Ergonomic design for the safety of machinery - Part 2: Principles for determining the dimensions required for access openings

79. MS ISO 17024:2003

Conformity assessment – General requirements for bodies operating certification of persons

80. MS ISO 10012:2003

Measurement management systems – Requirements for measurement processes and measuring equipment


Specification for canned pineapple (First revision)

2. MS 743:2003 Specification for cattle feed

(First revision) 3. MS 1102:2003

Specification for black and white pepper, ground (First revision)

4. MS 85:2003 Specification for edible wheat

flour (Second revision) 5. MS 1145:2003

Specification for fresh Eksotika papaya (First revision)

6. MS 1125:2003 Meat frankfurters – Specification

(First revision) 7. MS 1126:2003 Meat burgers – Specification

(First revision) 8. MS 1331:2003 Code of practice for access of

disable persons outside buildings (First revision)

Withdrawn Malaysian Standard 1. MS 85:2003 Specification for wheat flour

(First revision)


standards update

T H A I L A N D

January - December 2003

STANDARDS APPROVED 1. TIS 32-2546 (2003)

Test method for the release of lead and cadmium from ceramic ware, glass-ceramic ware and glassware in contact with food

2. TIS 77-2545(2002) Building bricks

3. TIS 501-2546(2003) Test methods for chemical resistance of pharmaceutical glass containers

4. TIS 508-2545(2002) Aluminium hydroxide compressed gel for pharmaceutical industry

5. TIS 564-2546(2003) Ceramic ware in contact with food : porcelain

6. TIS 601-2546(2003) Ceramic ware in contact with food: earthenware

7. TIS 602-2546(2003) Ceramic ware in contact with food: stoneware

8. TIS 603-2546(2003) Glassware in contact with food

9. TIS 791-2544(2001) Vitreous china sanitary appliances: wash basins

10. TIS 800-2545(2002) Door weather strips for automobiles

11. TIS 847-2545(2002) Magnesium hydroxide paste for pharmaceutical industry

12. TIS 913-2545(2002) Hard gelatin capsules

13. TIS 1179 Part 5-2543(2000) Code of practice for manufacture of prestressed concrete Part 5 Workmanship

14. TIS 1179 Part 6-2544(2001) Code of practice for manufacture of prestressed concrete Part 6 Inspection and testing

15. TIS 1508-2541(1998) Submersible motor-pumps for deep well

16. TIS 1859-2542(1999) Cellular plastics - specification for rigid cellular materials used in the thermal insulation of buildings

17. TIS 1860-2542(1999) Polymeric materials cellular flexible-polyurethane foam for load-bearing applications excluding carpet underlay specification

18. TIS 1861-2542(1999) Polymeric materials cellular flexible-polyvinychloride foam sheeting-specification

19. TIS 1879-2542(1999) Sodium chloride for pharmaceutical industry

20. TIS 1895-2542(1999) Flexible cellular polymeric materials-sponge and expanded cellular rubber products-specification - Part 1 : sheeting

21. TIS 1898-2542(1999) Plastics traps for discharge pipe ork systems inside building

22. TIS 1899-2542(1999) Thermoplastics pipes and fittings for hot and cold water systems

23. TIS 1912-2542(1999) Aggregates for asphalt pavement

24. TIS 2068-2544(2001) Industrial hexane

25. TIS 2069-2544(2001) Robber solvent

26. TIS 2076-2544(2001) Sound and television broadcast receivers and associated equipment -

immunity characteristics - limits and methods of measurement

27. TIS 2077-2544(2001) Information technology equipment - immunity characteristics - limits and methods of measurement

28. TIS 2109-2545(2002) Low voltage fuses Part 1 : general requirements

29. TIS 2110-2545(2002) Low voltage fuses Part 2 : Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)

30. TIS 2111-2545(2002) Low voltage fuses Part 2-1 : Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)

31. TIS 2112-2545(2002) Low voltage fuses Part 3 : Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)

32. TIS 2113-2545(2002) Low voltage fuses Part 3-1 : Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)

33. TIS 2114-2545(2002) Low voltage fuses Part 4 : Supplementary requirements for fuses - links for the protection of semiconductor devices

34. TIS 2119-2545(2002) Water for pharmaceutical use

35. TIS 2120-2545(2002) Guideline on the application on farm management for swine

36. TIS 2131-2545(2002) Prepainted hot-dip zinc-coated steel : coils and sheets

37. TIS 2132-2545(2002) Prepainted hot-dip zinc-coated


standards update

steel : corrugated

38. TIS 2133-2545(2002) Zinc coated flexible steel conduits for electrical wiring

39. TIS 2134-2545(2002) Room air conditioners environment requirements energy efficiency

40. TIS 2135-2545(2002) Coal fly ash for use as an admixture in concrete

41. TIS 2136-2545(2002) Coal fly ash for use as an admixture in concrete

42. TIS 2140-2546(2003) Cold rolled steel coil strip and sheet for automobiles uses

43. TIS 2143-2546(2003) Power cables with extruded insulation and their accessories for rated voltage from 1 kV (Um = 1.2 kV) up to 30 kV (Um = 36 kV)

44. TIS 2144-2546(2003) Power cables with extruded insulation and their accessories for rated voltage above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV)

45. TIS 19011-2546(2003) Guidelines for quality and/or environmental management systems auditing

STANDARDS REVISED 1.

TIS 569-2545(2002) Sodium tripolyphosphate for industrial use

STANDARDS WITHDRAWN

1. TIS 32-2528(1985) Test method for the release of lead and cadmium from ceramic ware, glass-ceramic ware and glassware in contact with food

2. (replaced by TIS 32-2546(2003)) Test method for the release of lead and cadmium from ceramic ware, glass-ceramic ware and glassware in contact with food

3. TIS 77-2531(1988) Building bricks

4. (replaced by TIS 77-2545(2002)) Building bricks

5. TIS 501-2527(1984) Test methods for chemical resistance of pharmaceutical glass containers

6. (replaced by TIS 501-2546(2003)) Test methods for chemical resistance of pharmaceutical glass containers

7. TIS 508-2527(1984) Aluminium hydroxide compressed gel for pharmaceutical industry

8. (replaced by TIS 508-2545(2002)) Aluminium hydroxide compressed gel for pharmaceutical industry

9. TIS 564-2529(1986) Ceramic ware in contact with food : porcelain

10. (replaced by TIS 564-2546(2003)) Ceramic ware in contact with food : porcelain

11. TIS 601-2529(1986) Ceramic ware in contact with food: earthenware

12. (replaced by TIS 601-2546(2003)) Ceramic ware in contact with food: earthenware

13. TIS 602-2529(1986) Ceramic ware in contact with food: stoneware

14. (replaced by TIS 602-2546(2003)) Ceramic ware in contact with food: stoneware

15. TIS 603-2529(1986) Glassware in contact with food

16. (replaced by TIS 603-2546(2003)) Glassware in contact with food

17. TIS 791-2531(1988) Vitreous china sanitary appliances: wash basins

18. (replaced by TIS 791-2544(2001)) Vitreous china sanitary appliances: wash basins

19. TIS 800-2531(1988) Door weather strips for automobiles

20. (replaced by TIS 800-2545(2002)) Door weather strips for automobiles

21. TIS 847-2532(1989) Magnesium hydroxide paste for pharmaceutical industry

22. (replaced by TIS 847-2545(2002)) Magnesium hydroxide paste for pharmaceutical industry

23. TIS 913-2532(1989) Hard gelatin capsules

24. (replaced by TIS 913-2545(2002)) Hard gelatin capsules


I N D O N E S I A - asean.org - Bulletin 18/accsq17/12... · SNI 04-6950-2003 H igh voltag es...

Documents

Transcript of I N D O N E S I A - asean.org - Bulletin 18/accsq17/12... · SNI 04-6950-2003 H igh voltag es...