HP eStation Zeen Ground Wire ReplacementThis guide is used to replace the Ground wire of the HP eStation Zeen MotherBoard.
Written By: dalton hale
HP eStation Zeen Ground Wire Replacement Draft: 2018-10-01Guide ID: 71793 -
This document was generated on 2019-10-04 09:37:16 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5
INTRODUCTION
If the troubleshooting procedures and all of the previous steps do not work it may be time to changethe motherboard ground wire.
TOOLS:Phillips #0 Screwdriver (1)Metal Spudger (1)Soldering Iron (1)Tweezers (1)iFixit Opening Tools (1)
HP eStation Zeen Ground Wire Replacement Draft: 2018-10-01Guide ID: 71793 -
This document was generated on 2019-10-04 09:37:16 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5
Step 1 — Motherboard Ground Wire
Remove the screw caps using a metal spudger.
Remove the four 6 mm screws using a Phillips #0 screwdriver.
Step 2
Insert a plastic opening tool into the case seam and slide it along the edges.
Lift and remove the back panel from the device.
HP eStation Zeen Ground Wire Replacement Draft: 2018-10-01Guide ID: 71793 -
This document was generated on 2019-10-04 09:37:16 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5
Step 3
Carefully disconnect the battery clipusing small plastic spudger.
The clip is extremely fragile.
Step 4
Use tweezers to disconnect theground wire from motherboardterminal.
HP eStation Zeen Ground Wire Replacement Draft: 2018-10-01Guide ID: 71793 -
This document was generated on 2019-10-04 09:37:16 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5
To reassemble your device, follow these instructions in reverse order.
Step 5
Use a soldering iron to remove theground wire.
Avoid touching or heating themotherboard.
HP eStation Zeen Ground Wire Replacement Draft: 2018-10-01Guide ID: 71793 -
This document was generated on 2019-10-04 09:37:16 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5
Top Related