30
45
60
15
Optional
1 Everything needed to install your blind
Center SupportBracket Requirements
Widths to 48" 0 bracketsWidths 481⁄16" to 72" 1 bracketsWidths 721⁄16" to 96" 2 brackets Widths 961⁄16" to 120" 3 brackets
Tools Needed
1/16" or 3/32"
Inside- or Outside-mount 2" Wood Blinds
HOW TO InsTall
Mark location of blind (Outside Mount)2
Mark bracket location3
Or
Ceiling Mount
Back Mount
Or
Side Mount
Drill holes4
Position the center support(s) in line with the mounting brackets so they will not interfere with the ladder tapes. Space evenly and keep out of the way of other working parts.
3 Optional center support(s)/projection brackets
attach valance clip
Groove must either be centered or at top
Space clips evenly across width. Clips must not interfere with ladder tapes.
6
Or • O •
Ou
screw in brackets5
Mount blind in brackets7Headrail/Center Support Profile
8 Close door on brackets
SNAP!
Optional valance with returns and spliced valances8
Some returns are pre-assembled
Spliced valance
Valance returns
Optional hold-down brackets9
attach valance9
attach Tilt Wand
additional instructions
Wipe with a soft cloth or lightly vacuum with a soft brush attachment.
Or1 2 3
Remove tab only if visible below valance
110581 (04/11)
Top Related