MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the...

20
BLINDS AND SHADES & DRAPERY, PANELS, VALANCES AND CORNICES Measuring for

Transcript of MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the...

Page 1: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

BLINDS AND SHADES &

DRAPERY, PANELS, VALANCES AND CORNICES

Measuring for

Page 2: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

2smithandnoble.com 800.248.8888 05/21/19

Squareness

OVERVIEW AND MOUNTING OPTIONSOur measuring guide will take you through the steps you need to measure your windows. Just a few simple measurements are all you’ll need – and if you’d like some help, or have questions, we are always here to help.

LATCH/LOCK

SILL

MOULDING/TRIM

MULLIONSILL

MOULDING/TRIM

WINDOW STAY

LOCKINGHANDLE

FRICTIONHINGE

JAMB

Metal Tape Measure Step Ladder Pen/Pencil Measure Sheet (included)TOOLS YOU WILL NEED:

• The type of window you have, and how it looks, will help you determine what style of window covering will work best.

• If your window opens inward and/or has parts protruding, such as a locking handle.

• If you have mullions, moulding/trim and/or window sills on each window. This information will help you make the correct decisions for your order.

CONSIDERATIONS

MOUNTING OPTIONSTo better understand your mounting options, start with two measurements. Round down to the nearest 1⁄8”.

1. MOUNT INSIDE WINDOW FRAME

Available when your window depth meets the minimum requirements for your desired product, and your window is square.

2. MOUNT OUTSIDE WINDOW FRAME

Use if your window is not square, or has obstacles such as handles or cranks. It’s a great option for room darkening and when inside mounting isn’t an option. Also works well when you want your window to appear larger.

Make sure you consider any obstacles such as cranks, handles, and window opening directi on.

WINDOW DEPTH

To check for squareness, measure diagonals as shown. If the measurements diff er by over 1⁄2”, your window is not square.

SQUARENESS

Window DepthBlinds & Shades

Page 3: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

3smithandnoble.com 800.248.8888 05/21/19

STACKING HEIGHT (IB)

STACKING HEIGHT (OB)STACKING HEIGHT

Window Depth

FRAME DEPTH

Flush Mount Blind

FLUSH

Projected Mount Blind

NON-FLUSH

PRODUCT DEPTH

MEASURING FOR INSIDE MOUNT BLINDS & SHADES

Measure every window, even if they appear identical. Use a metal tape measure to ensure accuracy Round to the nearest 1⁄8”. Write all measurements on the measurement sheets provided.

CONSIDERATIONS

MINIMUM DEPTH REQUIRED

Inside Mounted treatments require a minimum depth to be mounted. You will need this much unobstructed depth, including any handles, locks, etc., to Inside Mount a treatment. The charts on page 4 show you the minimum obstruction depth required for each treatment.

FLUSH MOUNT For the face of your treatment to be flush with the wall/trim, your frame depth must be the same or greater than the Flush Mount depth indicated on the chart on pg 4.

LIGHT GAPS A small deduction in the width and/or length will be taken by the factory to allow for correct operation. This will cause small light gaps on each side of the treatment. Give us your exact window dimensions to ensure your treatment operates properly. Do Not Adjust Your Measurements.

2-ON-1 HEADRAIL Combine two treatments on one headrail for maximum light control. They can be raised independently, yet convey a uniform, streamlined appearance. NOTE: For Wood Blinds ordered as 2 or more blinds with 1 valance, add the width of the moulding or mullion, if any, to the custom valance length, or the valance will be too narrow.

CORDED CONTROL You have the option to place the control (lift/tilt) on the right or left side. Pick the side that is easiest to reach.

STACKING When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See Product Stacking Charts on pgs 11-12) You cannot avoid this obstruction. If you want to retain all of your view, use outside mount and order your treatment to stack above the window opening.

STACKING HEIGHT (IB)

STACKING HEIGHT (OB)

INSIDE MOUNT WORKSHEETRoom Name: No. of Windows:

PRODUCTProduct ID/Name

Inside or Outside Mount

MEASUREMENTS MeasuredSize

OrderSize

Function Control on L or R

1. Space above the Window

2. Height 1st size3. Height 2nd size4. Height 3rd size5. Width 1st size6. Width 2nd size7. Width 3rd size8. Depth

9. Square? Yes/No

7/8"3/4"

7/8"3/4"

5/8"

5/8"1/2" 1/2"3/8"

3/8"

1/4"

1/4"

1/8"

1/8"

Window #1_________________ (location)

MeasuringFor Inside MountDepth of window casing:____________

Measure width of window in three places and circle the narrowest width below:Width #1:_________________________

Width #2:_________________________

Width #3:_________________________

Measure height of window in three places and circle the longest height below:

Height #1:_________________________

Height #2:_________________________

Height #3:_________________________

For Outside MountWidth: ___________________________

Height:___________________________

Ordering Mount Type: � Inside � Outside

Ordering Width:___________________

Ordering Height:__________________

Type of Blind or Shade:____________

Style Name:_______________________

Color Number:_____________________

Controls and Options to Consider:� Corded

� Cordless

� Bottom Up/Top Down

� Sun Up/Sun Down

� Combination Shades

� Continuous-Loop

� Motorization

� Cornice:________________________

� Valance:________________________

� Other:__________________________

7/8"3/4"

5/8"1/2"

3/8"1/4"

1/8"

1. MEASURE LEFT TO RIGHT (1, 2 & 3)Measure the window opening inside the frame from left to right, in three places as shown, to determine width. Round down to the nearest 1⁄8”.

• When ordering Roller/Solar Shades, Sheer Shadings or Verti cal Blinds, use the top measurement for width.

• When ordering all other products, use the smallest measurement of the three taken for the width. This will be your ordering width.

Measure the window opening from top to bottom in three places as shown to determine height.

• For the height, use the largest measurement of the three taken. Round up to the nearest 1⁄8”. This will be your ordering height.

3. WRITE these measurements on the measure sheet at the end of this guide.

2. MEASURE TOP TO BOTTOM (4, 5 & 6)

MEASURING FOR INSIDE MOUNTBLINDS & SHADES

Blinds & Shades

Page 4: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

4smithandnoble.com 800.248.8888 05/21/19

BLINDS & SHADES MinimumDepth

Flush Mount

2” Durawood Blind - Standard 11⁄8" 3"

2" Durawood Blinds - Motorized Tilt (blind, bracket, battery pack) 11⁄8” 4”

2 1⁄2" Durawood Blinds 11⁄8” 31⁄2”

2 1⁄2" Durawood Blinds - Motorized Tilt (blind, bracket, battery pack) 21⁄8” 4”

Fabric Shade - Standard 15⁄8” 13⁄4”

Fabric Shade - Cordless, Motorization 2” 23⁄4"

Fabric Shade with Loop Control 2” 4”

Fabric Shade with Slim Headrail 11⁄4” 11⁄4"

Fabric Shade - TD/BU 13⁄4” 23⁄4”

BLINDS & SHADES MinimumDepth

Flush Mount

Honeycomb Shade - Remote Motorization 3⁄4” 21⁄4”

Honeycomb Shade - Wand Motorization 3⁄4” 21⁄4”

Honeycomb Shade - Cordless, Loop Control, 2 on 1 Headrail, TD/BU, Day/Night

3⁄4” 21⁄8”

Honeycomb Shade -Standard Cord, 2 on 1 Headrail & TD/BU

3⁄4” 23⁄8”

Honeycomb Shade - Kid’s Easy Lift 11⁄4” 21⁄4”

Honeycomb Shade - Wendy B. Easy Lift 3⁄4” 21⁄2”

2” Metal Blinds 11⁄8" 3"

Natural Woven - All Styles with Cord Lift, Cordless Lift, Motorization, TD/BU 11⁄4” 21⁄4”

Natural Woven - Loop Control & Operable Lining 11⁄2” 31⁄2”

Natural Woven - Slim Headrail 3⁄4” 11⁄4”

Pleated Shade - 1” Standard Cord, Top Down/Bottom Up, and 2 on 1 Headrail

1⁄2” 2”

Pleated Shade - 1 7⁄8” Standard Cord, Top Down/Bottom Up, and 2 on 1 Headrail

1⁄2” 21⁄2"

Pleated Shade - All styles with Easy Lift Cordless 1⁄2” 21⁄2”

Pleated Shade - All styles with Loop Control 1” 2”

Pleated Shade Motorization - (battery pack visible) 1” 23⁄8"

Pleated Shade Motorization - (hidden battery pack) 13⁄4" 25⁄8”

Roller & Solar Shade - Cordless 11⁄4” 2”

Roller & Solar Shade - Loop Control, Dual Roller, Motorization 11⁄2” 3”

Roller & Solar Shade - With Cassette 1” 33⁄4”

Sheer Shadings - Horizontal - All Styles 1” 33⁄4”

Wood Blind - 1 3⁄8” and 2” Slats 15⁄8” 35⁄8”

Wood Blind - 2 3⁄4” Slats 15⁄8” 4”

MINIMUM DEPTHMinimum depth is the amount of unobstructed depth that you will need to Inside Mount a treatment.

FLUSH MOUNT DEPTHFor the face of your treatment to be flush with the wall, make sure your frame depth is the same or greater than the Flush Mount depth indicated on the charts.

PRODUCT DEPTHProjected Mount Blind

NON-FLUSH

Flush Mount Blind

FLUSH

PRODUCT DEPTH CHARTSBlinds & Shades

Page 5: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

5smithandnoble.com 800.248.8888 05/21/19

CONSIDERATIONS

CLEARANCE DEPTH When mounting over another window treatment, order clearance depth at least 1” greater than the depth of the existing treatment. (See chart on pg 4) Consider using either spacer blocks or extension brackets.

� SPACER BLOCKS - Adds 3⁄8”. For outside mount, beyond trim/moulding. By adding spacer blocks or extension brackets, the possibility of light leakage around the edges increases. Adding drapery panels will reduce this.

� EXTENSION BRACKETS - Will add additional clearance, varies by product. Go online or call for more information.

WINDOW SILL If you have a protruding window sill, consider having your shade/blind end on top of it.

2-ON-1 HEADRAIL Combine two treatments on one headrail for maximum light control. They can be raised independently, yet convey a uniform, streamlined appearance. If you have a mullion, consider placing the split where the mullion is located.

CORDED CONTROL You have the option to place the control (lift/tilt) on the right or left side. Pick the side that is easiest to reach.

SHADE STACKINGHEIGHT

When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See Product Stacking Charts on pgs 11-12) You cannot avoid this obstruction. If you want to retain all of your view, use outside mount and order your treatment to stack above the window opening.

RECOMMENDED OVERLAPPRODUCT OVERLAP WIDTH OVERLAP HEIGHT

Horizontal Blinds & Shades 3” (11⁄2” each side) 2” top, 11⁄2” bott om

Roller Shades 3” (11⁄2” each side) 2” top, 11⁄2” bott om

Horizontal Sheer Shadings 6” (3” each side) 3” top, 11⁄2” bott om

Roller Shades, Solar Shades and Sheer Shadings will be made to the exact size you specify. Fabrics willl be approx. 1” narrower than ordered width.

STACKING HEIGHTEXTENSION BRACKETSPACER BLOCKS

STACKING HEIGHT (IB)

STACKING HEIGHT (OB)

Measure every window, even if they appear identical. Use a metal tape measure to ensure accuracy. Round down to the nearest 1⁄8”. Write all measurements on the measurement sheets provided.

INSIDE MOUNT WORKSHEETRoom Name: No. of Windows:

PRODUCTProduct ID/Name

Inside or Outside Mount

MEASUREMENTS MeasuredSize

OrderSize

Function Control on L or R

1. Space above the Window

2. Height 1st size3. Height 2nd size4. Height 3rd size5. Width 1st size6. Width 2nd size7. Width 3rd size8. Depth

9. Square? Yes/No

7/8"3/4"

7/8"3/4"

5/8"

5/8"1/2" 1/2"3/8"

3/8"

1/4"

1/4"

1/8"

1/8"

Window #1_________________ (location)

MeasuringFor Inside MountDepth of window casing:____________

Measure width of window in three places and circle the narrowest width below:Width #1:_________________________

Width #2:_________________________

Width #3:_________________________

Measure height of window in three places and circle the longest height below:

Height #1:_________________________

Height #2:_________________________

Height #3:_________________________

For Outside MountWidth: ___________________________

Height:___________________________

Ordering Mount Type: � Inside � Outside

Ordering Width:___________________

Ordering Height:__________________

Type of Blind or Shade:____________

Style Name:_______________________

Color Number:_____________________

Controls and Options to Consider:� Corded

� Cordless

� Bottom Up/Top Down

� Sun Up/Sun Down

� Combination Shades

� Continuous-Loop

� Motorization

� Cornice:________________________

� Valance:________________________

� Other:__________________________

7/8"3/4"

5/8"1/2"

3/8"1/4"

1/8"

1. MEASURE WIDTH

Measure the outside width of the area you wish to cover.

This will be your ordering width.

Measure the height of the area you wish to cover.

This is your ordering height.

3. WRITE these measurements on the measure sheet at the end of this guide.

2. MEASURE HEIGHT

MEASURING FOR OUTSIDE MOUNTBLINDS & SHADES

Blinds & Shades

Page 6: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

6smithandnoble.com 800.248.8888 05/21/19

CONSIDERATIONS

MINIMUM DEPTH REQUIRE

You will need this much unobstructed depth, including any handles, locks, etc., to Inside Mount a treatment. (See chart on pg 8)

FLUSH MOUNT For the face of your treatment to be flush with the wall/trim, make sure your frame depth is the same or greater than the Flush Mount depth indicated on the chart on pg 4.

CORDED CONTROL You have an option to place the control on either the left or right side.

STACKING(see illustration above)

When your shade is fully open, the “stack” will be gathered at the side of your window or door, obscuring your view. What side do you open frequently? Place stacking on the opposite side.

To stack off your window or door, use Stacking Chart to determine how much to add to your ordering width. (See Product Stacking Charts on pg 8)

EXTENSION BRACKETS Consider adding Extension Brackets if you have thick moulding. Go online or call us for more information.

EXTENSION BRACKET

Window Depth

FRAME DEPTH

Flush Mount Blind

FLUSH

Projected Mount Blind

NON-FLUSH

PRODUCT DEPTH

STACKING HEIGHT (IB)

STACKING HEIGHT (OB)

LEFT STACK

Shade will gather or “stack” when drawn open.

Right Stack

STACKING HEIGHT (IB)

STACKING HEIGHT (OB)

RIGHT STACK

Shade will gather or “stack” when drawn open.

STACKING HEIGHT (IB)

STACKING HEIGHT (OB)

Split StackSPLIT STACK

Open from middle, panels will gather evenly on either end of the window.

CENTER STACK

STACKING HEIGHT (IB)

STACKING HEIGHT (OB)

(Honeycomb Only)

H

W

INSIDE MOUNT WORKSHEETRoom Name: No. of Windows:

PRODUCTProduct ID/Name

Inside or Outside Mount

MEASUREMENTS MeasuredSize

OrderSize

Function Control on L or R

1. Space above the Window

2. Height 1st size3. Height 2nd size4. Height 3rd size5. Width 1st size6. Width 2nd size7. Width 3rd size8. Depth

9. Square? Yes/No

7/8"3/4"

7/8"3/4"

5/8"

5/8"1/2" 1/2"3/8"

3/8"

1/4"

1/4"

1/8"

1/8"

Window #1_________________ (location)

MeasuringFor Inside MountDepth of window casing:____________

Measure width of window in three places and circle the narrowest width below:Width #1:_________________________

Width #2:_________________________

Width #3:_________________________

Measure height of window in three places and circle the longest height below:

Height #1:_________________________

Height #2:_________________________

Height #3:_________________________

For Outside MountWidth: ___________________________

Height:___________________________

Ordering Mount Type: � Inside � Outside

Ordering Width:___________________

Ordering Height:__________________

Type of Blind or Shade:____________

Style Name:_______________________

Color Number:_____________________

Controls and Options to Consider:� Corded

� Cordless

� Bottom Up/Top Down

� Sun Up/Sun Down

� Combination Shades

� Continuous-Loop

� Motorization

� Cornice:________________________

� Valance:________________________

� Other:__________________________

7/8"3/4"

5/8"1/2"

3/8"1/4"

1/8"

1. INSIDE MOUNT

• Measure the window opening inside the frame from left to right, as shown, to determine width. Round down to the nearest 1⁄8”.

• - Measure the window opening from top to bott om in three places as shown on the frame to left to determine height. Write these measurements on the measure sheet. Allow 1⁄4” for fl oor clearance.

• For the HEIGHT, use the largestmeasurement of the three taken.This will be your ordering height.

• Be sure to measure Minimum Depth, Flush Mount & Frame Depth.

� WIDTH - Measure the area you want to cover (W).

� HEIGHT - Measure the area you’d like to cover (H). You need a minimum of 2” fl at surface above the opening.

• WALL MOUNT - Allow 1⁄4” fl oor clearance.

• CEILING MOUNT - Allow 1⁄2” fl oor clearance.

2. OUTSIDE MOUNT

LARGE OPENINGS & SLIDING DOORS

MEASURING FOR SPECIAL APPLICATIONS

Blinds & Shades

Page 7: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

7smithandnoble.com 800.248.8888 05/21/19

OBSTRUCTIONS & STACKING

When your shade is fully open, the “stack” will be gathered at the side of your window or door, obscuring your view. What side do you open frequently? Place stacking on the opposite side.

To stack off your window or door, use Stacking Chart to determine how much to add to your ordering width. (See Product Stacking Charts on pg 11-12)

MEASURING WIDTH We recommend that you measure 1” past the glass/moulding on doors to account for any obstructi ons (such as handles). Certain products will fi t between the glass and handle, such as Roller/Solar and Honeycombs. Call us if you need more information.

MEASURING HEIGHT Add 2-3” above the glass/moulding.

HOLD DOWN BRACKETS

Hold down brackets are used to keep the shade/blind in place when lowered. We recommend these for doors that are opened and closed frequently.

METAL DOORS OR KICKPLATES

If your door is metal, or has a kickplate at the bottom, you will need to pre-drill and use metal screws when you install your product.

HEADRAIL/VALANCE/ CASSETTE SIZE

Depending on the treatment you choose, the headrail, cassette or valance may hit the wall when the door is opened. If this is a concern, consider products with narrow flush mount depth. (See Product Depth Charts on pg 4)

CORDED CONTROL You have an option to place the control on either the left or right side.

CONSIDERATIONS

When ordering blinds or shades for doors, order them as outside mount.

FRENCH DOORS

H

W

DOOR

H

W

INSIDE MOUNT WORKSHEETRoom Name: No. of Windows:

PRODUCTProduct ID/Name

Inside or Outside Mount

MEASUREMENTS MeasuredSize

OrderSize

Function Control on L or R

1. Space above the Window

2. Height 1st size3. Height 2nd size4. Height 3rd size5. Width 1st size6. Width 2nd size7. Width 3rd size8. Depth

9. Square? Yes/No

7/8"3/4"

7/8"3/4"

5/8"

5/8"1/2" 1/2"3/8"

3/8"

1/4"

1/4"

1/8"

1/8"

Window #1_________________ (location)

MeasuringFor Inside MountDepth of window casing:____________

Measure width of window in three places and circle the narrowest width below:Width #1:_________________________

Width #2:_________________________

Width #3:_________________________

Measure height of window in three places and circle the longest height below:

Height #1:_________________________

Height #2:_________________________

Height #3:_________________________

For Outside MountWidth: ___________________________

Height:___________________________

Ordering Mount Type: � Inside � Outside

Ordering Width:___________________

Ordering Height:__________________

Type of Blind or Shade:____________

Style Name:_______________________

Color Number:_____________________

Controls and Options to Consider:� Corded

� Cordless

� Bottom Up/Top Down

� Sun Up/Sun Down

� Combination Shades

� Continuous-Loop

� Motorization

� Cornice:________________________

� Valance:________________________

� Other:__________________________

7/8"3/4"

5/8"1/2"

3/8"1/4"

1/8"

MEASURE 2”-3” ABOVE GLASS

MEASURE 1” PAST GLASS/MOULDING

MEASURE 2”-3” BELOW GLASS

DOORS & FRENCH DOORS

MEASURING FOR SPECIAL APPLICATIONS

Blinds & Shades

Page 8: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

8smithandnoble.com 800.248.8888 05/21/19

ROLLER/SOLAR PANEL TRACKStacking Chart

20 - 28”

281⁄8 - 38”

381⁄8 - 50”

501⁄8 - 56”

561⁄8 - 63”

631⁄8 - 75”

751⁄8 - 85”

851⁄8 - 88”

881⁄8-100”

1001⁄8- 113”

1131⁄8-125”

1251⁄8- 138”

1381⁄8- 216”

One-way Draw

Number of Panels 2 2 2 3 3 3 4 4 4 5 5 5

CALL

OR

CLIC

K

Width of Panels (inches)

103⁄4 - 143⁄4”

147⁄8 - 193⁄4”

197⁄8 - 253⁄4”

173⁄4 - 195⁄8”

193⁄4 - 22”

22 - 26”

197⁄8 - 223⁄8”

223⁄8 - 231⁄8”

231⁄8 - 261⁄8”

211⁄4 - 233⁄4”

237⁄8 - 261⁄4”

261⁄4 - 283⁄4”

Split Draw

Number of Panels 4 4 4 4 4 4 4 4 6 6 6 6

Width of Panels (inches) 61⁄8 - 81⁄8”

81⁄8 - 105⁄8”

105⁄8 - 135⁄8”

135⁄8 - 151⁄8”

151⁄8 - 167⁄8”

167⁄8 - 197⁄8”

197⁄8 - 223⁄8”

223⁄8 - 231⁄8”

16 - 177⁄8”

18 - 201⁄8”

201⁄8-221⁄8”

221⁄8 - 241⁄4”

PANEL TRACKProduct Depth Chart

One-Way Draw

Split Draw

One-Way Draw

Split Draw

One-Way Draw

Split Draw

One-Way Draw

Split Draw

Number of Panels 2 4 3 N/A 4 6 5 8

Minimum Frame Depth Required 11⁄4” 17⁄16” 21⁄16” 21⁄4”

Minimum Flush Mount 19⁄16” 2” 211⁄16” 33⁄8”

Minimum Outside Mount 21⁄16” 21⁄16” 21⁄16” 21⁄16”

VERTICAL BLINDSStacking Chart

up to 25

251⁄8" - 37"

371⁄8" - 50"

501⁄8" - 56"

561⁄8" -62"

621⁄8" - 75"

751⁄8" - 81"

811⁄8"- 87"

871⁄8"- 100"

1001⁄8"- 112"

1121⁄8”-192”

One-way DrawNumber of Vanes 4 - 8 9 - 12 13 - 17 17 - 18 19 - 20 21 - 25 25 - 26 27 - 28 29 - 33 33 - 36

CALL

OR

CLIC

K

Width of Stack 5"- 65⁄8" 7"- 8" 83⁄8"-95⁄8" 95⁄8"-10" 103⁄8"-105⁄8" 11"-123⁄8" 123⁄8"-125⁄8" 13"-133⁄8" 135⁄8"-15" 15"-16"

Split DrawNumber of Vanes 4 -10 12 - 14 14 - 18 18 - 20 20 - 22 22 - 26 26 - 28 28 - 30 30 - 34 34 - 38

Width of Stack 7"- 93⁄8" 93⁄8"-115⁄8" 115⁄8"- 12" 12"-121⁄2" 121⁄2"-131⁄4" 131⁄4"-141⁄2" 141⁄2"-151⁄4" 151⁄4"-16" 16"-171⁄4" 171⁄4"-181⁄2"

Minimum frame depth required 2”

Minimum flush mount 41⁄4”

HONEYCOMB VERTICAL SHADESOne-way Draw Stacking 61⁄2”

Split Draw Stacking (each side) 61⁄2”

Minimum Frame Depth Required 1”

Minimum Flush Mount 35⁄8”

SPECIAL APPLICATIONS CHARTSBlinds & Shades

Page 9: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

9smithandnoble.com 800.248.8888 05/21/19

Squareness

WINDOWDEPTH

WINDOWWIDTH

WINDOWLENGTH

OBSTRUCTIONS SQUARENESS

• Use the smallest width and the longest length when ordering.

SKYLIGHT MINIMUM INSIDE MOUNT REQUIREMENTS

Motorizati on Minimum Flush 21⁄2”Opti onal extension pole available for easy open and close.

CONSIDERATIONS

OBSTRUCTIONS Make sure you consider any obstacles such as cranks, handles, and window opening directi on.

SQUARENESS To check for squareness, measure diagonals as shown. If the measurements diff er by over 1⁄2” your window is not square, and this product is not recommended.

SKYLIGHTS

INSIDE MOUNT WORKSHEETRoom Name: No. of Windows:

PRODUCTProduct ID/Name

Inside or Outside Mount

MEASUREMENTS MeasuredSize

OrderSize

Function Control on L or R

1. Space above the Window

2. Height 1st size3. Height 2nd size4. Height 3rd size5. Width 1st size6. Width 2nd size7. Width 3rd size8. Depth

9. Square? Yes/No

7/8"3/4"

7/8"3/4"

5/8"

5/8"1/2" 1/2"3/8"

3/8"

1/4"

1/4"

1/8"

1/8"

Window #1_________________ (location)

MeasuringFor Inside MountDepth of window casing:____________

Measure width of window in three places and circle the narrowest width below:Width #1:_________________________

Width #2:_________________________

Width #3:_________________________

Measure height of window in three places and circle the longest height below:

Height #1:_________________________

Height #2:_________________________

Height #3:_________________________

For Outside MountWidth: ___________________________

Height:___________________________

Ordering Mount Type: � Inside � Outside

Ordering Width:___________________

Ordering Height:__________________

Type of Blind or Shade:____________

Style Name:_______________________

Color Number:_____________________

Controls and Options to Consider:� Corded

� Cordless

� Bottom Up/Top Down

� Sun Up/Sun Down

� Combination Shades

� Continuous-Loop

� Motorization

� Cornice:________________________

� Valance:________________________

� Other:__________________________

7/8"3/4"

5/8"1/2"

3/8"1/4"

1/8"

MEASURING FOR SPECIAL APPLICATIONS

Blinds & Shades

Page 10: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

10smithandnoble.com 800.248.8888 05/21/19

• Length is exactly half of the base measurement, and can be ordered online.

• If you do not have a Perfect Arch, Call our Customer Service at 800.248.8888

LOOKING FOR SOLUTIONS FOR OTHER ARCHES? CALL US AT 800.248.8888

LOOKING FOR SOLUTIONS FOR BAY OR CORNER WINDOWS? CALL US AT 800.248.8888

WIDTH MEASUREMENT

TALL

EST

PO

INT

LEN

GTH

PERFECT ARCH

BAY WINDOW

FRONT FACING WALL

FRONT FACING WALL

Center

Angle 2Angle 1

LeftRight

PERFECT ARCH MINIMUM DEPTH REQUIREMENTS

Minimum Frame Depth 11⁄4”

Minimum Flush 21⁄4”Optional extension pole available for easy open and close

INSIDE MOUNT WORKSHEETRoom Name: No. of Windows:

PRODUCTProduct ID/Name

Inside or Outside Mount

MEASUREMENTS MeasuredSize

OrderSize

Function Control on L or R

1. Space above the Window

2. Height 1st size3. Height 2nd size4. Height 3rd size5. Width 1st size6. Width 2nd size7. Width 3rd size8. Depth

9. Square? Yes/No

7/8"3/4"

7/8"3/4"

5/8"

5/8"1/2" 1/2"3/8"

3/8"

1/4"

1/4"

1/8"

1/8"

Window #1_________________ (location)

MeasuringFor Inside MountDepth of window casing:____________

Measure width of window in three places and circle the narrowest width below:Width #1:_________________________

Width #2:_________________________

Width #3:_________________________

Measure height of window in three places and circle the longest height below:

Height #1:_________________________

Height #2:_________________________

Height #3:_________________________

For Outside MountWidth: ___________________________

Height:___________________________

Ordering Mount Type: � Inside � Outside

Ordering Width:___________________

Ordering Height:__________________

Type of Blind or Shade:____________

Style Name:_______________________

Color Number:_____________________

Controls and Options to Consider:� Corded

� Cordless

� Bottom Up/Top Down

� Sun Up/Sun Down

� Combination Shades

� Continuous-Loop

� Motorization

� Cornice:________________________

� Valance:________________________

� Other:__________________________

7/8"3/4"

5/8"1/2"

3/8"1/4"

1/8"

MEASURING FOR SPECIAL APPLICATIONS

Blinds & Shades

Page 11: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

HONEYCOMBProduct Height or Width When

Fully Drawn Open (in inches)

24" 48" 72" 96" 120"

Honeycomb DualView Shades - Peti te Cell Cordless & Loop Control - Light Filtering

3 3⁄8" 4" 4 1⁄2" 5 1⁄8" 5 3⁄4"

Honeycomb DualView Shades - Peti te Cell Cordless & Loop Control - Blackout 3" 3 1⁄4" 3 1⁄2" 3 3⁄4" 4"

Honeycomb Shades - Peti te Cell Std Cord, TD/BU, 2 on 1 Headrail - Light Filtering 1 7⁄8" 2 1⁄2" 3" 3 5⁄8" 4 1⁄4"

Honeycomb Shades - Peti te Cell Standard Cord, TD/BU, 2 on 1 Headrail - Blackout 1 1⁄2" 1 3⁄4" 2" 2 1⁄4" 2 1⁄2"

Honeycomb Shades - Grand Cell Std Cord, TD/BU, 2 on 1 Headrail - Light Filtering

2" 2 5⁄8" 3 1⁄4" 3 7⁄8" 4 1⁄2"

Honeycomb Shades - Grand Cell Standard Cord, TD/BU, 2 on 1 Headrail - Blackout 1 3⁄8" 1 1⁄2" 1 3⁄4" 2" 2 1⁄4"

Honeycomb Shades - Twin Cell Std Cord, TD/BU, 2 on 1 Headrail - Light Filtering

2 1⁄8" 2 3⁄4" 3 1⁄2" 4 1⁄8" 5"

Honeycomb Shades - Twin Cell Standard Cord, TD/BU, 2 on 1 Headrail - Blackout 1 1⁄2" 1 3⁄4" 2" 2 1⁄4" 2 1⁄2"

Honeycomb Shades - Luxe Linen Std Cord & 2 on 1 Headrail -Lt Filtering & Room Darkening

1" 2" 2 3⁄8" 2 5⁄8" N/A

Honeycomb Shades - Luxe Linen Standard Cord & 2 on 1 Headrail - Semi Sheer

1 1⁄8" 2 1⁄4" 2 3⁄4" 3 3⁄8" N/A

Honeycomb Shades - Luxe Linen TD/BU - Light Filtering & Room Darkening 1 15⁄16" 2 5⁄8" 3" 3 3⁄8" N/A

Honeycomb Shades - Luxe Linen TD/BU - Semi Sheer 1 7⁄16" 2 7⁄8" 3 3⁄8" 3 7⁄8" N/A

Honeycomb Shades - Luxe Linen Loop Control & 2 on 1 Headrail - Light Filtering & Room Darkening

1 1⁄2" 3" 3 3⁄8" 3 7⁄8" N/A

Honeycomb Shades - Luxe Linen Loop Control & 2 on 1 Headrail - Semi Sheer

1 5⁄8" 3 1⁄4" 3 3⁄4" 4 3⁄8" N/A

Honeycomb Shades - Peti te Cell Loop Control TD/BU - Light Filtering 2 3⁄4" 3 3⁄8" 3 7⁄8" 4 1⁄2" 5 1⁄8"

Honeycomb Shades - Peti te Cell Loop Control TD/BU - Blackout 2 3⁄8" 2 5⁄8" 2 7⁄8" 3 1⁄8" 3 3⁄8"

Honeycomb Shades - Grand Cell Loop Control TD/BU - Light Filtering 2 7⁄8" 3 1⁄2" 4 1⁄8" 4 3⁄4" 5 3⁄8"

Honeycomb Shades - Grand Cell Loop Control TD/BU - Blackout 2 1⁄4" 2 3⁄8" 2 5⁄8" 2 7⁄8" 3 1⁄8"

Honeycomb Shades - Twin Cell Loop Control TD/BU - Light Filtering 3" 3 5⁄8" 4 3⁄8" 5" 5 7⁄8"

Honeycomb Shades - Twin Cell Loop Control TD/BU - Blackout 2 3⁄8" 2 5⁄8" 2 7⁄8" 3 1⁄8" 3 3⁄8"

Honeycomb Shades - Luxe Linen Loop Control TD/BU - Light Filtering - Lt Filtering & Room Darkening

1 3⁄4" 3 1⁄2" 3 7⁄8" 4 3⁄8" N/A

Honeycomb Shades - Luxe Linen Loop Control TD/BU - Light Filtering - Semi Sheer

17⁄8" 33⁄4" 41⁄4" 47⁄8" N/A

Honeycomb Shades - Peti te Cell Cordless & Loop Control & 2 on 1 Headrail- Light Filtering

23⁄4" 33⁄8" 37⁄8" 41⁄2" N/A

Honeycomb Shades - Peti te Cell Cordless & Loop Control & 2 on 1 Headrail - Blackout

23⁄8" 25⁄8" 27⁄8" 31⁄8" N/A

Honeycomb Shades - Grand Cell Cordless & Loop Control & 2 on 1 Headrail- Light Filtering

27⁄8" 31⁄2" 41⁄8" 43⁄4" N/A

Honeycomb Shades - Grand Cell Cordless & Loop Control & 2 on 1 Headrail - Blackout

21⁄4" 23⁄8" 25⁄8" 27⁄8" N/A

Honeycomb Shades - Twin Cell Cordless & Loop Control & 2 on 1 Headrail- Light Filtering

3" 35⁄8" 43⁄8" 5" N/A

Honeycomb Shades - Twin Cell Cordless & Loop Control & 2 on 1 Headrail - Blackout

23⁄8" 25⁄8" 27⁄8" 31⁄8" N/A

Honeycomb Shades - Luxe Linen Cordless Control & 2 on 1 Headrail- Light Filtering & Room Darkening

11⁄2" 3" 31⁄4" 35⁄8" N/A

Honeycomb Shades - Luxe Linen Cordless Control & 2 on 1 Headrail - Semi Sheer 15⁄8" 31⁄4" 31⁄2" 41⁄8" N/A

Honeycomb Shades - Peti te Cell Cordless TD/BU- Light Filtering 33⁄8" 4" 41⁄2" 51⁄8" N/A

Honeycomb Shades - Peti te Cell Cordless TD/BU - Blackout 3" 31⁄4" 31⁄2" 33⁄4" N/A

Honeycomb Shades - Grand Cell Cordless TD/BU- Light Filtering 31⁄2" 41⁄2" 43⁄4" 53⁄8" N/A

Honeycomb Shades - Grand Cell Cordless TD/BU - Blackout 27⁄8" 3" 31⁄4" 31⁄2" N/A

Honeycomb Shades - Twin Cell Cordless TD/BU- Light Filtering 35⁄8" 41⁄4" 5" 55⁄8" N/A

Honeycomb Shades - Twin Cell Cordless TD/BU - Blackout 3" 31⁄4" 31⁄2" 33⁄4" N/A

Honeycomb Shades - Luxe Linen Cordless TD/BU- Light Filtering & Room Darkening

113⁄16" 35⁄8" 37⁄8" 41⁄4" N/A

Honeycomb Shades - Luxe Linen Cordless TD/BU - Semi Sheer 115⁄16" 37⁄8" 4" 45⁄8" N/A

Honeycomb Shades - Luxe Linen Motorizati on Light Filtering & Room Darkening

11⁄2" 3" 33⁄8" 37⁄8" N/A

Honeycomb Shades - Luxe Linen Motorizati on Semi Sheer 15⁄8" 31⁄4" 33⁄4" 43⁄8" N/A

Honeycomb Shades - Verti cal - All Styles 61⁄2" 61⁄2" 61⁄2" 61⁄2" 61⁄2"

Honeycomb Shades - Easy Lift Cordless - Light Filtering & Room Darkening 23⁄4" 31⁄8" 33⁄8" 35⁄8" N/A

HONEYCOMBProduct Height or Width When

Fully Drawn Open (in inches)

24" 48" 72" 96" 120"

*Additi onal upgrades and opti ons may aff ect stacking, as well as your choice of materials. Please contact Customer Service for details.

**Stacking area will vary with fabric choice; above is based on medium-weight

fabrics. Heavier or bulky fabrics will require more stacking area.

STACKING HEIGHTSTACKING CHARTSBlinds & Shades

11smithandnoble.com 800.248.8888 05/21/19

Page 12: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

OTHER PRODUCTSProduct Height or Width When Fully Drawn Open (in inches)

24” 48” 72” 96” 120”

Fabric Shade** Standard Lift Flat Roman (Max Height is 108”) 6 1⁄4” 6 3⁄4” 7 3⁄4” 8 1⁄2” 8 7⁄8”

Fabric Shade** Standard Classic Roman (Max Height is 108”) 6 1⁄2” 7 1⁄4” 7 7⁄8” 9” 9 1⁄2”

Fabric Shade** Standard Reverse Classic Roman (Max Height is 108") 6 1⁄2” 7 1⁄4” 8 1⁄2” 9 7⁄8” 10 1⁄2”

Fabric Shade** Standard Soft Roman (Max Ht is 108") 8 1⁄2” 8 7⁄8” 9 1⁄4” 9 7⁄8” 10 1⁄2”

Fabric Shade** Standard Relaxed Roman (Max Ht is 108") 9 1⁄4” 11” 13 1⁄2” 15 3⁄4” 17”

Fabric Shade** Loop Control Flat Roman (Max Height is 108”) 8” 8 3⁄4” 9 3⁄4” 10 1⁄2” 10 7⁄8”

Fabric Shade** Loop Control Classic Roman (Max Ht is 108") 8 1⁄2” 9 1⁄4” 9 7⁄8” 11” 11 1⁄2”

Fabric Shade** Loop Control Reverse Classic Roman (Max Height is 108”) 9” 9 3⁄4” 10 1⁄2” 11 3⁄4” 11 1⁄4”

Fabric Shade** Loop Control Soft Roman (Max Ht is 108”) 9 1⁄2” 9 7⁄8” 9 1⁄4” 9 7⁄8” 10 1⁄2”

Fabric Shade** Loop Control Relaxed Roman (Max Ht is 108”) 11 3⁄4” 13 1⁄2” 16” 18 1⁄2” 19”

Fabric Shade** Cordless/Motorized Flat Roman 9” 9 1⁄2” 10 3⁄4” N/A N/A

Fabric Shade** Cordless/Motorized Classic Roman 9” 9 3⁄4” 10 7⁄8” N/A N/A

Fabric Shade** Cordless/Motorized Reverse Classic Roman 9” 10” 11” N/A N/A

Fabric Shade** Cordless/Motorized Soft Roman 10 1⁄2” 10 7⁄8” 11 1⁄2” N/A N/A

Fabric Shade** Cordless/Motorized Relaxed Roman 11 3⁄4” 13 1⁄2” 16” N/A N/A

Fabric Shade** Flat Roman Top Down/Bott om Up 6 1⁄4” 6 3⁄4” 7 3⁄4” N/A N/A

Fabric Shade** Classic Roman Top Down/Bott om Up 6 1⁄2” 7 1⁄4” 7 7⁄8” N/A N/A

Fabric Shade** Reverse Classic Roman Top Down/Bott om Up 6 1⁄2” 7 1⁄4” 8 1⁄2” N/A N/A

*Additi onal upgrades and opti ons may aff ect stacking, as well as your choice of materials. Please contact Customer Service for details. **Stacking area will vary with fabric choice; above is based on medium-weight fabrics.

Heavier or bulky fabrics will require more stacking area.

STACKING CHARTSBlinds & Shades

STACKING HEIGHT

12smithandnoble.com 800.248.8888 05/21/19

Page 13: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

OTHER PRODUCTSProduct Height or Width When Fully Drawn Open (in inches)

24" 48" 72" 96" 120"

Durawood Blinds - 2" with Standard Ladder 5 1⁄8" 7 1⁄8" 9 1⁄8" 11 1⁄8" 13 1⁄4"

Durawood Blinds - 2" with Ladder Tape 5 5⁄8" 8 1⁄8" 10 5⁄8" 13 1⁄4" 15 1⁄4"

Durawood Blinds - 2 1⁄2" with Standard Ladder 5" 6 3⁄4" 8 7⁄8" 11 1⁄2" 13 1⁄2"

Metal Blinds - All Styles 21⁄2" 31⁄2" 41⁄2" 51⁄2" 6"

Natural Woven - Flat Fold & Waterfall - All Styles 7 1⁄2" 7 1⁄2" 7 1⁄2" 8" 81⁄2"

Pleated Shades - Standard Cord & TD/BU 2" 2 1⁄2" 2 3⁄4" 3" N/A

Pleated Shades - Loop Control 3 1⁄4" 3 1⁄2" 3 3⁄4" 4" N/A

Pleated Shades - Easy Lift Cordless 3 1⁄2" 3 3⁄4" 4" N/A N/A

Pleated Shades - Motorizati on 2" 3 3⁄8" 3 5⁄8" 3 7⁄8” N/A

Roller & Solar - Cordless 3 1⁄4" 3 5⁄8" 3 7⁄8" 4 1⁄8" N/A

Roller & Solar - Loop Control, Motorizati on 3" 3 1⁄4" 3 1⁄2" 3 3⁄4" 4"

Roller & Solar - Cassett e 3 7⁄8" 3 7⁄8" 3 7⁄8" 3 7⁄8" 3 7⁄8"

Roller & Solar - Metal Valance 5" 5" 5" 5" 5"

Sheer Shading - Horizontal 3 1⁄4" 3 1⁄4" 3 1⁄4" 3 1⁄4" 3 1⁄4"

Wood Blind - Standard Ladder* - 13⁄8" 4 3⁄4" 7 3⁄8" 10" 12 3⁄4" 15 1⁄2"

Wood Blind - Standard Ladder* - 2" 4" 5 3⁄4" 7 1⁄2" 9 3⁄8" 11 1⁄4"

Wood Blind - Standard Ladder* - 2 3⁄4" 3 1⁄2" 4 5⁄8" 5 3⁄4" 7 1⁄8" 8 3⁄8"

Wood Blind - with Ladder Tape* - 13⁄8" 5 1⁄2" 8 1⁄2" 11 1⁄2" 14 3⁄4" 17 5⁄8"

Wood Blind - with Ladder Tape* - 2" 4 5⁄8" 6 1⁄2" 8 5⁄8" 10 3⁄4" 12 7⁄8"

Wood Blind - with Ladder Tape* - 2 3⁄4" 4 1⁄8" 6" 7 5⁄8" 9 1⁄4" 11"

*Additi onal upgrades and opti ons may aff ect stacking, as well as your choice of materials. Please contact Customer Service for details. **Stacking area will vary with fabric choice; above is based on medium-weight fabrics.

Heavier or bulky fabrics will require more stacking area.

STACKING HEIGHT

STACKING CHARTSBlinds & Shades

13smithandnoble.com 800.248.8888 05/21/19

Page 14: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

Measure width of window in 3 places. The smallest will be your order width.For Roller/Solar& Sheer Shadings or Vertical Blinds use measurement (top)

Width _____________________________

Width _____________________________

Width _____________________________

Measure height of window in 3 places. The largest will be your order width

Height ___________________________

Height ___________________________

Height ___________________________

MEASURING INSIDE MOUNT

Controls: L R or Same Side

Measure width of window in 3 places. The smallest will be your order width.For Roller/Solar& Sheer Shadings or Vertical Blinds use measurement (top)

Width _____________________________

Width _____________________________

Width _____________________________

Measure height of window in 3 places. The largest will be your order width

Height ___________________________

Height ___________________________

Height ___________________________

MEASURING INSIDE MOUNT

Controls: L R or Same Side

SAM

PLEWINDOW #0 ____________________

(room name)

Product ____________________________

Product ID/Name _________________

______________________________________

______________________________________

MEASURING OUTSIDE MOUNTMeasure width you wish to cover

Width (W) --------------------------------------------------

Measure height you wish to cover

Height (H)-------------------------------------------------

Controls and OptionsControls: L R or Same Side o Extension Brackets

o Spacer Blocks__________________________________________

__________________________________________

__________________________________________

__________________________________________

__________________________________________

__________________________________________

__________________________________________

__________________________________________

__________________________________________

__________________________________________

__________________________________________

__________________________________________

__________________________________________

__________________________________________

__________________________________________

INSIDE MOUNT WORKSHEETRoom Name: No. of Windows:

PRODUCTProduct ID/Name

Inside or Outside Mount

MEASUREMENTS MeasuredSize

OrderSize

Function Control on L or R

1. Space above the Window

2. Height 1st size3. Height 2nd size4. Height 3rd size5. Width 1st size6. Width 2nd size7. Width 3rd size8. Depth

9. Square? Yes/No

7/8"3/4"

7/8"3/4"

5/8"

5/8"1/2" 1/2"3/8"

3/8"

1/4"

1/4"

1/8"

1/8"

Window #1_________________ (location)

MeasuringFor Inside MountDepth of window casing:____________

Measure width of window in three places and circle the narrowest width below:Width #1:_________________________

Width #2:_________________________

Width #3:_________________________

Measure height of window in three places and circle the longest height below:

Height #1:_________________________

Height #2:_________________________

Height #3:_________________________

For Outside MountWidth: ___________________________

Height:___________________________

Ordering Mount Type: � Inside � Outside

Ordering Width:___________________

Ordering Height:__________________

Type of Blind or Shade:____________

Style Name:_______________________

Color Number:_____________________

Controls and Options to Consider:� Corded

� Cordless

� Bottom Up/Top Down

� Sun Up/Sun Down

� Combination Shades

� Continuous-Loop

� Motorization

� Cornice:________________________

� Valance:________________________

� Other:__________________________

7/8"3/4"

5/8"1/2"

3/8"1/4"

1/8"

WINDOW #1 ____________________ (room name)

Product ____________________________

Product ID/Name _________________

______________________________________

______________________________________

MEASURING OUTSIDE MOUNTMeasure height you wish to cover

Width (W) --------------------------------------------------

Measure height you wish to cover

Height (H)-------------------------------------------------

Controls and OptionsControls: L R or Same Side o Extension Brackets

o Spacer Blocks

WINDOW #2 ____________________ (room name)

Product ____________________________

Product ID/Name _________________

______________________________________

______________________________________

MEASURING OUTSIDE MOUNTMeasure height you wish to cover

Width (W) --------------------------------------------------

Measure height you wish to cover

Height (H)-------------------------------------------------

Controls and OptionsControls: L R or Same Side o Extension Brackets

o Spacer Blocks

Bath Honeycomb 15108Spice C

X

37 1⁄8”

85 1⁄4”

Measure width of window in 3 places. The smallest will be your order width.For Roller/Solar& Sheer Shadings or Vertical Blinds use measurement (top)

Width _____________________________

Width _____________________________

Width _____________________________

Measure height of window in 3 places. The largest will be your order width

Height ___________________________

Height ___________________________

Height ___________________________

MEASURING INSIDE MOUNT

64”64 1⁄4”64 1⁄8”

33 1⁄4”33 1⁄8”33 3⁄8”

Controls: L R or Same Side

Measure every window, even if they appear identical. Use a metal tape measure to ensure accuracy. Round down to the nearest 1⁄8”. If measuring more than one window in a room, work through the room from left to right.

RECORDING YOUR MEASUREMENTS

Blinds & Shades

14smithandnoble.com 800.248.8888 05/21/19

Page 15: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

Measure width of window in 3 places. The smallest will be your order width.For Roller/Solar& Sheer Shadings or Vertical Blinds use measurement (top)

Width _____________________________

Width _____________________________

Width _____________________________

Measure height of window in 3 places. The largest will be your order width

Height ___________________________

Height ___________________________

Height ___________________________

MEASURING INSIDE MOUNT

Controls: L R or Same Side

Measure width of window in 3 places. The smallest will be your order width.For Roller/Solar& Sheer Shadings or Vertical Blinds use measurement (top)

Width _____________________________

Width _____________________________

Width _____________________________

Measure height of window in 3 places. The largest will be your order width

Height ___________________________

Height ___________________________

Height ___________________________

MEASURING INSIDE MOUNT

Controls: L R or Same Side

Measure width of window in 3 places. The smallest will be your order width.For Roller/Solar& Sheer Shadings or Vertical Blinds use measurement (top)

Width _____________________________

Width _____________________________

Width _____________________________

Measure height of window in 3 places. The largest will be your order width

Height ___________________________

Height ___________________________

Height ___________________________

MEASURING INSIDE MOUNT

Controls: L R or Same Side

WINDOW #3 ____________________ (room name)

Product ____________________________

Product ID/Name _________________

______________________________________

______________________________________

MEASURING OUTSIDE MOUNTMeasure height you wish to cover

Width (W) ----------------------------------------------------------

Measure height you wish to cover

Height (H) -----------------------------------------------------

Controls and OptionsControls: L R or Same Side o Extension Brackets

o Spacer Blocks_____________________________________________

_____________________________________________

_____________________________________________

_____________________________________________

_____________________________________________

WINDOW #4 ____________________ (room name)

Product ____________________________

Product ID/Name _________________

______________________________________

______________________________________

MEASURING OUTSIDE MOUNTMeasure height you wish to cover

Width (W) ----------------------------------------------------------

Measure height you wish to cover

Height (H) -----------------------------------------------------

Controls and OptionsControls: L R or Same Side o Extension Brackets

o Spacer Blocks_____________________________________________

_____________________________________________

_____________________________________________

_____________________________________________

_____________________________________________

WINDOW #5 ____________________ (room name)

Product ____________________________

Product ID/Name _________________

______________________________________

______________________________________

MEASURING OUTSIDE MOUNTMeasure height you wish to cover

Width (W) ----------------------------------------------------------

Measure height you wish to cover

Height (H) -----------------------------------------------------

Controls and OptionsControls: L R or Same Side o Extension Brackets

o Spacer Blocks_____________________________________________

_____________________________________________

_____________________________________________

_____________________________________________

_____________________________________________

INSIDE MOUNT WORKSHEETRoom Name: No. of Windows:

PRODUCTProduct ID/Name

Inside or Outside Mount

MEASUREMENTS MeasuredSize

OrderSize

Function Control on L or R

1. Space above the Window

2. Height 1st size3. Height 2nd size4. Height 3rd size5. Width 1st size6. Width 2nd size7. Width 3rd size8. Depth

9. Square? Yes/No

7/8"3/4"

7/8"3/4"

5/8"

5/8"1/2" 1/2"3/8"

3/8"

1/4"

1/4"

1/8"

1/8"

Window #1_________________ (location)

MeasuringFor Inside MountDepth of window casing:____________

Measure width of window in three places and circle the narrowest width below:Width #1:_________________________

Width #2:_________________________

Width #3:_________________________

Measure height of window in three places and circle the longest height below:

Height #1:_________________________

Height #2:_________________________

Height #3:_________________________

For Outside MountWidth: ___________________________

Height:___________________________

Ordering Mount Type: � Inside � Outside

Ordering Width:___________________

Ordering Height:__________________

Type of Blind or Shade:____________

Style Name:_______________________

Color Number:_____________________

Controls and Options to Consider:� Corded

� Cordless

� Bottom Up/Top Down

� Sun Up/Sun Down

� Combination Shades

� Continuous-Loop

� Motorization

� Cornice:________________________

� Valance:________________________

� Other:__________________________

7/8"3/4"

5/8"1/2"

3/8"1/4"

1/8"

Measure every window, even if they appear identical. Use a metal tape measure to ensure accuracy. Round down to the nearest 1⁄8”. If measuring more than one window in a room, work through the room from left to right.

RECORDING YOUR MEASUREMENTS

Blinds & Shades

15smithandnoble.com 800.248.8888 05/21/19

Page 16: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

16smithandnoble.com 800.248.8888 05/21/19

MEASURING FOR INSIDE AND OUTSIDE MOUNT TREATMENTS

INSIDE MOUNT OUTSIDE MOUNT

Select Inside or Outside Mount

CONSIDERATIONS IN CHOOSING INSIDE MOUNT VS. OUTSIDE MOUNT

Inside mounted shades are contained within your window frame. Many people prefer an inside mount because it provides a finished, built-in look without covering the window molding; it is also suggested for the 1st layer of a layered window treatment.

Outside mounted blinds or shades are mounted on your wall or molding. They are often used to make a window appear larger or to hide a less-than-attractive window, when windows are not square, or when there is not sufficient frame depth for inside mounting.

FRAME DEPTHInside Mount requires adequate mounting depth within your frame. At least 2" is enough for most treatments. If your frame isn’t deep enough for the style you’ve chosen, you should use Outside Mount. See chart for Product Depth on Measuring Worksheet.

OBSTACLESCheck for any obstacles on your window, such as handles or cranks, that could interfere with your treatment’s operation with an Inside Mount. If there are such obstacles, you should consider Outside Mount.

SQUARENESSFor Inside Mount your window should be square, otherwise your treatment may not work properly or hang attractively. To check for squareness measure diagonally in both directions. If measurements differ by over 1⁄2", you should use Outside Mount.

Product depth includes allowing enough adequate window depth, unobstructed depth and flush or non-flush allowance for your window treatments.

SURFACE ABOVE WINDOWOutside Mount requires at least 2" of flat surface above yourwindow or on the window frame for mounting brackets. See chartfor Recommended Overlap below.

Using a metal tape, measure the area you want to cover, including any overlap on the surrounding wall. Remember you must have at least 2" of flat surface above the window opening to allow space for mounting brackets.

When you specify Outside Mount (except for Roller or Solar Shades, or Illusions Shadings) your treatment will be made to the exact size you specify (excluding trim). Roller, Solar and Illusions fabrics will be approximately. 1" narrower than ordered. You can also order the treatment wider to avoid light gaps.

Also specify any extension brackets needed to clear handles, cranks, etc. as one of your No Charge Options.

SQUARENESS

MEASURING CONSIDERATIONS FOR ANY WINDOW TREATMENT

If You Have Selected: If You Have Selected: INSIDE MOUNTSTEP 1: Measure the inside width at 3 locations, top, middle and bottom. Record the smallest of the 3 measurements. This is your ordering width. We make the necessary deductions (approximately 1⁄2").

STEP 2: Measure the height at 3 locations, left, middle and right side. Record the longest of the 3 measurements. This is your ordering height.

PLEASE NOTE: When measuring for an inside mount, do not add to the size of your product for a tighter fit. It will not fit properly in your window.

OUTSIDE MOUNTSTEP 1: Measure the outside width of the area you wish to cover. If space allows we recommend adding overlap to reduce light, see Recommended Overlap Chart below. This is your ordering width.

STEP 2: Measure the height of the area you wish to cover. This is your ordering height.

MINIMUM DEPTHYou’ll need this much unobstructed depth, including any handles, locks, etc., to Inside Mount that treatment.

FLUSH MOUNTFor the face of your treatment to be flush with the wall, make sure your frame depth is the same or greater than the Flush Mount depth indicated on the chart.

PRODUCT DEPTH

RECOMMENDED OVERLAP

Product Overlap Width,Outside Mount

Overlap Height,Outside Mount

Drapery & Panels 12" (6" ea. side) 4" top; 4" below sill, or 1⁄2" above floor

Valances & Cornices 2" (1" ea. side) 2" top

MEASURING & ORDER GUIDE

Need assistance? Call customer service: 800.248.8888 Monday through Friday 6am – 6pm; Saturday 7am – 4pm; Sunday 7am – 4pm; Pacific Time

Flush Mount Blind

FLUSH

Projected Mount Blind

NON-FLUSH

Window Depth

Drapery, Panels, Valances & Cornices

Page 17: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

17smithandnoble.com 800.248.8888 05/21/19

MEASURING FOR DRAPERY AND PANELSYOU MAY ORDER DRAPERY AS SINGLE PANELS OR IN PAIRS

CENTERLEFT

SINGLE PANEL • One individual panel• Choose Left, Right or Center panel

RIGHT

MEASURING FOR PANELS AND DRAPERYTOTAL WIDTHMeasure the width you wish to cover: all styles come with fullness built in, so order exact width needed. If space allows, we recommend adding 6" to 12" on each side, beyond window edges: this makes windows look larger and allows fabric to stack clear of windows when drapes are fully open.

TOTAL HEIGHTFinished height is measured from top to bottom, including tabs, or rod pockets (Tie Top measured from top of panel to bottom of panel). These styles are normally ordered to be installed 4" above the window or near the ceiling (be sure to add these extra inches to your final measurements to ensure the correct height). All Drapery styles can be ordered as Drapery Valances up to 20" in length. All rings & hardware are sold separately.

DOUBLE LAYER TREATMENTS To mount two panels over one window (e.g. a sheer behind an opaque fabric), indicate which will be the back (closer to the window) and which will be the front treatment. Use identical measurements (small deductions will be taken on back treatment) and specify double rod hardware.

PLEASE NOTE: Fabrics made with natural fibers may experience slight changes due to variables in the environment such as humidity, temperature and moisture. This is to be considered normal. If this is a concern, consider ordering a length that includes a small puddle.

DRAPERY & PANELS - 1 WAY STACK/DRAW Stacking Chart Order Width in inches Up to 24” 241⁄8 - 48” 481⁄8 - 72” 721⁄8 - 96” 961⁄8 - 120” 1201⁄8 - 144” 1441⁄8 - 168” 1681⁄8 - 192” over 210”

X Pleat/Modern Pleat, Pinch/Parisian Pleat 15 22 30 37 44 51 58 66

CALL

OR

CLIC

K

Single Pleat 11 16 20 25 30 35 40 44Soft Top, Hidden Tab, Rod Pocket 13 19 25 31 37 43 49 55

Tie Top 5 8 10 13 15 17 20 22Grommet 4 7 11 14 18 22 25 29

Single Panel Stack Width is provided. Stacking widths are approximate & will vary due to fullness, fabric weight & lining.

DRAPERY & PANELS - SPLIT STACK/DRAW Stacking Chart - per panelOrder Width in inches Up to 24” 241⁄8 - 48” 481⁄8 - 72” 721⁄8 - 96” 961⁄8 - 120” 1201⁄8 - 144” 1441⁄8 - 168” 1681⁄8 - 192” over 210”

X Pleat/Modern Pleat, Pinch/Parisian Pleat 8 11 15 18 22 26 29 33

CALL

OR

CLIC

K

Single Pleat 5 8 10 13 15 17 20 22Soft Top, Hidden Tab, Rod Pocket 7 10 13 16 19 22 25 28

Tie Top 3 4 5 6 8 9 10 11Grommet 2 4 5 7 9 11 13 14

Single Panel Stack Width is provided. Stacking widths are approximate & will vary due to fullness, fabric weight & lining.

WAVE DRAPERY - 1 WAY STACK/DRAW Stacking Chart Order Width in inches Up to 35” 351⁄8 - 49” 491⁄8 - 73” 731⁄8 - 97” 971⁄8 - 121” 1211⁄8 - 145” 1451⁄8 - 173” 1731⁄8 - 202” over 202”

Classic Wave 16 19 25 31 37 43 50 58 CALL OR CLICK

Single Panel Stack Width is provided. Stacking widths are approximate & will vary due to fullness, fabric weight & lining.

WAVE DRAPERY - SPLIT STACK/DRAW Stacking Chart - per panelOrder Width in inches Up to 35” 351⁄8 - 49” 491⁄8 - 73” 731⁄8 - 97” 971⁄8 - 121” 1211⁄8 - 145” 1451⁄8 - 173” 1731⁄8 - 202” over 202”

Classic Wave 8 10 13 16 19 22 25 29 CALL OR CLICK

Single Panel Stack Width is provided. Stacking widths are approximate & will vary due to fullness, fabric weight & lining.

PAIR OF DRAPERY• Two equal panels (1 right, 1 left)• When ordering a pair of drapery the width you specify will be divided into 2 equal panels totaling your overall width.

Example: Width ordered at 100" as a pair. You will receive two 50" panels.

PAIR

Drapery, Panels, Valances & Cornices

Page 18: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

SOFT TOP - 150% FullnessOrder Width in inches 12”-

29”291⁄8 -

47"471⁄8 -

65"651⁄8 -

83"831⁄8 - 101"

1011⁄8 - 119"

1191⁄8 - 137"

1371⁄8 - 155"

1551⁄8 - 173"

1731⁄8 - 191"

1911⁄8 - 209"

Ring Quantity for Single Panel Without Returns 10 15 20 25 29 34 38 43 47 52 56

Ring Quantity for Single Panel With Returns 15 20 25 29 34 38 43 47 52 56 N/A

Order Width in inches 24”- 39”

391⁄8 - 57"

571⁄8 - 75"

751⁄8 - 93"

931⁄8 - 111"

1111⁄8 - 129"

1291⁄8 - 147"

1471⁄8 - 165"

1651⁄8 - 183"

1831⁄8 - 201"

Ring Quantity for Pair of Panels Without Returns 16 20 25 29 34 38 43 47 52 56

Ring Quantity for Pair of Panels With Returns 20 25 29 34 38 43 47 52 56 N/A

RING CHARTS DRAPERY AND PANELS

PINCH PLEAT, X-PLEAT, PARISIAN PLEAT, MODERN PLEAT - 200% FullnessOrder Width in inches 12”-

20"201⁄8 -

34"341⁄8 -

46"461⁄8 -

61"611⁄8 -

72"721⁄8 -

88"881⁄8 -

99"991⁄8 - 115"

1151⁄8 - 125"

1251⁄8 - 142"

1421⁄8 - 152"

1521⁄8 - 169"

1691⁄8 - 178"

1781⁄8 - 196"

1961⁄8 - 209"

2091⁄8 - 223"

2231⁄8 - 234"

2341⁄8 - 250"

2501⁄8 - 261"

Ring Quantity for Single Panel Without Returns 7 10 12 15 17 20 22 25 27 30 32 35 37 40 42 45 47 50 52

Ring Quantity for Single Panel With Returns 10 12 15 17 20 22 25 27 30 32 35 37 40 42 45 47 50 52 N/A

Order Width in inches 24”- 27”

271⁄8 - 41"

411⁄8 - 54"

541⁄8 - 68"

681⁄8 - 81"

811⁄8 - 95"

951⁄8 - 108"

1081⁄8 - 122"

1221⁄8 - 135"

1351⁄8 - 149"

1491⁄8 - 162"

1621⁄8 - 176"

1761⁄8 - 189"

1891⁄8 - 203"

2031⁄8 - 216"

2161⁄8 - 230"

2301⁄8 - 243"

2431⁄8 - 257"

Ring Quantity for Pair of Panels Without Returns 12 14 18 20 22 24 28 30 32 34 38 40 42 44 48 50 52 54

Ring Quantity for Pair of Panels With Returns 14 18 20 22 24 28 30 32 34 38 40 42 44 48 50 52 54 N/A

SOFT TOP - 200% FullnessOrder Width in inches 12”-

21”211⁄8- 34"

341⁄8- 48"

481⁄8- 61"

611⁄8- 75"

751⁄8- 88"

881⁄8- 102"

1021⁄8- 115"

1151⁄8- 129"

1291⁄8- 142"

1421⁄8- 156"

Ring Quantity for Single Panel Without Returns 10 16 20 25 29 34 38 43 47 52 56

Ring Quantity for Single Panel With Returns 16 20 25 29 34 38 43 47 52 56 N/A

Order Width in inches 24”- 28”

281⁄8- 41"

411⁄8- 55"

551⁄8- 68"

681⁄8- 82"

821⁄8- 95"

951⁄8- 109"

1091⁄8- 122"

1221⁄8- 136"

1361⁄8- 149"

Ring Quantity for Pair of Panels Without Returns 16 20 25 29 34 38 43 47 52 56

Ring Quantity for Pair of Panels With Returns 20 25 29 34 38 43 47 52 56 N/A

Drapery & Panels

ORDERING TIP The number of rings needed will depend on your drapery style and size.

If you are ordering Smith & Noble drapery, use the charts here to determine the amount of rings you will need to order.

If you are using your own drapery, please count the number of pin hooks your drapery has and order that amount of rings.

PINCH PLEAT, X-PLEAT, PARISIAN PLEAT, MODERN PLEAT - 250% FullnessOrder Width in inches 12”-

15”151⁄8 -

26"261⁄8 -

36"361⁄8 -

48"481⁄8 -

57"571⁄8 -

69"691⁄8 -

78"781⁄8 -

91"911⁄8 -

99"991⁄8 - 112"

1121⁄8 - 120"

1201⁄8 - 134"

1341⁄8 - 141"

1411⁄8 - 156"

1561⁄8 - 163"

1631⁄8 - 177"

1771⁄8 - 186"

1861⁄8 - 199"

1991⁄8 - 208"

Ring Quantity for Single Panel Without Returns 7 10 12 15 17 20 22 25 27 30 32 35 37 40 42 45 47 50 52

Ring Quantity for Single Panel With Returns 10 12 15 17 20 22 25 27 30 32 35 37 40 42 45 47 50 52 N/A

Order Width in inches 24”- 31”

311⁄8 - 42"

421⁄8 - 52"

521⁄8 - 63"

631⁄8 - 74"

741⁄8 - 85"

851⁄8 - 96"

961⁄8 - 106"

1061⁄8 - 117"

1171⁄8 - 128"

1281⁄8 - 139"

1391⁄8 - 150"

1501⁄8 - 160"

1601⁄8 - 171"

1711⁄8 - 182"

1821⁄8 - 193"

1931⁄8 - 204"

Ring Quantity for Pair of Panels Without Returns 14 18 20 22 24 28 30 32 34 38 40 42 44 48 50 52 54

Ring Quantity for Pair of Panels With Returns 18 20 22 24 28 30 32 34 38 40 42 44 48 50 52 54 N/A

SINGLE PLEAT - 150% FullnessOrder Width in inches 12”-

28"281⁄8 -

46"461⁄8 -

63"631⁄8 -

82"821⁄8 -

98"981⁄8 - 118"

118 1⁄8 - 134"

1341⁄8 - 154"

1541⁄8 - 169"

1691⁄8 - 190"

1901⁄8 - 204"

2041⁄8 - 226"

2261⁄8 - 240"

2401⁄8 - 262"

2621⁄8- 275"

2751⁄8- 298"

2981⁄8- 313"

3131⁄8- 334"

3341⁄8- 349"

Ring Quantity for Single Panel Without Returns 9 12 16 19 23 26 30 33 37 42 44 47 51 54 58 61 65 68 72

Ring Quantity for Single Panel With Returns 12 16 19 23 26 30 33 37 42 44 47 51 54 58 61 65 68 72 N/A

Order Width in inches 24”- 39"

39 1⁄8- 57"

57 1⁄8- 75"

75 1⁄8- 93"

93 1⁄8- 111"

1111⁄8- 129"

129 1⁄8- 147"

147 1⁄8- 165"

165 1⁄8- 183"

183 1⁄8- 201"

201 1⁄8- 219"

219 1⁄8- 237"

237 1⁄8- 265"

265 1⁄8- 273"

273 1⁄8- 291"

291 1⁄8- 309"

309 1⁄8- 327"

327 1⁄8- 345"

Ring Quantity for Pair of Panels Without Returns 14 18 20 24 28 32 34 38 42 46 48 52 56 60 62 66 70 74

Ring Quantity for Pair of Panels With Returns 18 20 24 28 32 34 38 42 46 48 52 56 60 62 66 70 74 N/A

18smithandnoble.com 800.248.8888 05/21/19

Page 19: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

19smithandnoble.com 800.248.8888 05/21/19

MEASURING FOR HARDWARE

HEIGHT SUGGESTIONS FOR PANELS AND DRAPERIES

VALANCE – For panel styles that will be used as a top treatment or valance, we recommend approximately 10-20" for length.

SILL LENGTH – A great choice for a window in a recess or above furniture, or for one that is opened frequently.

APRON LENGTH – For ideal proportions, this look should fall about 4" below sill.

CAFÉ LENGTH – Panels usually measure 1⁄2" of the window length. These styles are especially useful for kitchens, allowing both natural light and privacy. Best hardware for these are Petite Rods (less than 1" in dia.) for smaller size windows or Medium Rods (1" in dia) for bigger windows.

FLOOR LENGTH – Treatments that will be opened and closed regularly should fall about 1⁄4" above the floor or carpeting so they skim that surface. We recommend using traversing hardware.

SLIGHT BREAK – Add 1-2" of length for a thoughtfully-finished, designer look.

PUDDLE LENGTH – Add another 2-4" of length, which is to be arranged in poufs on the fl oor (not recommended for windows in high traffi c areas).

The rod width you specify on your order does not include the width of the finials on each end. Finials add 1⁄2" to 91⁄2" on each end, depending upon the style. Hardware is usually ordered same size as drapery. For exact finial widths by style, call Customer Service.

MEASURING FOR HARDWARE

APRON LENGTH CAFÉ LENGTH FLOOR LENGTH SLIGHT BREAKVALANCE SILL LENGTHEXTRA  LONG 

PUDDLE  LENGTH

Need assistance? Call customer service: 800.248.8888 Monday through Friday 6am – 6pm; Saturday 7am – 4pm; Sunday 7am – 4pm; Pacific Time

Drapery, Panels, Valances & Cornices

Page 20: MOG drapery blinds shades combined 051519€¦ · When your blinds or shades are fully raised, the “stack” will be gathered at the top of your window, obscuring your view. (See

20smithandnoble.com 800.248.8888 05/21/19

RECORDING YOUR MEASUREMENTS

_______________ _______________ width x height

_____________________________________ frame depth

_____________________________________room

_____________________________________window treatment

1 2

_______________ _______________ width x height

_____________________________________ frame depth

_____________________________________room

_____________________________________window treatment

3

Notes: ________________________________________________________________________________________

__________________________________________________________________________________________________

__________________________________________________________________________________________________

Notes: ________________________________________________________________________________________

__________________________________________________________________________________________________

__________________________________________________________________________________________________

Notes: ________________________________________________________________________________________

__________________________________________________________________________________________________

__________________________________________________________________________________________________

Measuring Worksheet

PRODUCT MinimumDepth

Flush Mount

CORNICES - WOOD - ARUNDEL 2 1⁄4” N/A

CORNICES - WOOD - ARUNDEL CROWN N/A N/A

CORNICES - WOOD - SIMPLISTIQUE 2 1⁄2” N/A

CORNICES - WOOD - GEORGETOWN 2 1⁄2” N/A

CORNICES - BAMBOO - ALL STYLES 2 1⁄2” N/A

CORNICES - MANHATTAN & LOFT - ALL STYLES 2 1⁄2” N/A

FABRIC CORNICES - TAILORED, CAMERON & HAMILTON 1 1⁄2” 3”

FABRIC VALANCES - BOARD MOUNT (11⁄2" BOARD) RELAXED, SOFT, CASUAL 1 5⁄8" 1 3⁄4"

Use this space to record your window dimensions for easy reference when filling out your order form. To start, all you need is a steel measuring tape (cloth tapes are not accurate), and a pencil. Remember to round your measurements down to the nearest eighth of an inch (1/8").

TIP: One of the most common mistakes is to transpose the width and height measurements. If your situation is unique or unclear, please call for assistance at 1.800.248.8888. Our customer service representatives are available to help you in any way you may need.

Need assistance? Call customer service: 800.248.8888 Monday through Friday 6am – 6pm; Saturday 7am – 4pm; Sunday 7am – 4pm; Pacific Time

INSIDE MOUNT WORKSHEETRoom Name: No. of Windows:

PRODUCTProduct ID/Name

Inside or Outside Mount

MEASUREMENTS MeasuredSize

OrderSize

Function Control on L or R

1. Space above the Window

2. Height 1st size3. Height 2nd size4. Height 3rd size5. Width 1st size6. Width 2nd size7. Width 3rd size8. Depth

9. Square? Yes/No

7/8"3/4"

7/8"3/4"

5/8"

5/8"1/2" 1/2"3/8"

3/8"

1/4"

1/4"

1/8"

1/8"

Window #1_________________ (location)

MeasuringFor Inside MountDepth of window casing:____________

Measure width of window in three places and circle the narrowest width below:Width #1:_________________________

Width #2:_________________________

Width #3:_________________________

Measure height of window in three places and circle the longest height below:

Height #1:_________________________

Height #2:_________________________

Height #3:_________________________

For Outside MountWidth: ___________________________

Height:___________________________

Ordering Mount Type: � Inside � Outside

Ordering Width:___________________

Ordering Height:__________________

Type of Blind or Shade:____________

Style Name:_______________________

Color Number:_____________________

Controls and Options to Consider:� Corded

� Cordless

� Bottom Up/Top Down

� Sun Up/Sun Down

� Combination Shades

� Continuous-Loop

� Motorization

� Cornice:________________________

� Valance:________________________

� Other:__________________________

7/8"3/4"

5/8"1/2"

3/8"1/4"

1/8"

Drapery, Panels, Valances & Cornices