Languages
Pages
Legal
UnitsProperties
mmThickness
mmLength and Width (Maximum)
mm/mSquareness (Maximum)
%Linear Expansion
N/mm²Internal Bond (Minimum)
N/mm²Modulus of Rupture (Minimum)
N/mm²Modulus of Elasticity (Minimum)
–Thickness Swell (Maximum)
%Residual Moisture Content
NScrew Holding - Face
Thickness (mm)
SpecificationANSI A208.2-2016
BERNECK PRODUCTS(tipic values)
CQ.: 006 REV.: 001 MAY 10TH, 2017
≤ 9,5
The parameters indicated in this Certificate of Quality refer to values specified in ANSI A208.2-2016. The tests results performed by BERNECK, according to standard procedures and methodologies, are in compliance and exceed the specifications listed below.
0,54
28,9
NA
2,2mm 1,65mm
21,6
2160
11%
1,58
52,69
NA
1,17mm
0,70
35,0
3020
1,40 mm
0,60
≤ 0,33 ≤ 0,33 ≤ 0,33
≤ 3,0 ≤ 3,0 ≤ 3,0
± 2,0 ± 2,0 ± 2,0
± 0,125 ± 0,125 ± 0,125
34,0
3015
7,1%
NA
≤ 9,0
988
5,8
NA
5,5
1235
5,9
1150
ppmFormaldehyde Emissions
Note: Requirements not specified for a given thickness range are marked as not applicable (NA).
MDF > 8 mm MDF > 8 mm
≤ 0,11
MDF ≤ 8 mm
≤ 0,13 0,077
MDF ≤ 8 mm
0,082
NScrew Holding - Edge NA NA 787 NA NA 930
± 0,125
± 2,0
≤ 3,0
≤ 0,33
>9,5≤15 > 15 ≤ 9,5 >9,5≤15 > 15
Grade: 220 Grade: 130
Grade: 220 Grade: 130
Contact Information: Telephone number: (+55) 41 2109-1629 | e-mail: [email protected] by: Mario Fabiano Borin | Quality and Development ManagerPrepared by: Ivan Pallone | Quality and Development Manager
CERTIFICATE OF QUALITY
MDF BERNECK® CARB 2
HDF BERNECK® CARB 2
Medium Density Fiberboard
High Density Fiberboard
UnitsProperties
mmThickness
mmLength and Width (Maximum)
mm/mSquareness (Maximum)
%Average Density - Variation
N/mm²Internal Bond (Minimum)
N/mm²Modulus of Rupture - MOR (Minimum)
N/mm²Modulus of Elasticity - MOE (Minimum)
%24 Hour Thickness Swell (Maximum)
%Residual Moisture Content
mg/100gFormaldehyde Emissions – Class E1
Thickness (mm)
HDF MDF
1,8 to 2,5
CQ.: 007 REV.: 001 MAY 10TH, 2017
>2,5 to 4,0
± 0,2
The parameters indicated in this Certificateof Quality refer to values specified in EN 622-5:2006. The tests results performed by BERNECK, according to standard procedures and methodologies, are in compliance and exceed the specifications listed below.
0,65
23
NA
45
0,65
23
NA
35
0,65
23
2.700
30
0,65
23
2.700
17
0,60
22
2.500
15
0,55
20
2.200
12
0,55
18
2.100
10
± 0,3± 0,2
± 5,0
≤ 2,0
± 7
4 to 11
≤ 8
> 4,0 to 6,0
> 6,0 to 9,0
> 9,0 to 12,0
> 12,0 to 19,0
> 19,0 to 30,0
Contact Information: Telephone number: (+55) 41 2109-1629 | e-mail: [email protected] by: Mario Fabiano Borin | Quality and Development ManagerPrepared by: Ivan Pallone | Quality and Development Manager
CERTIFICATE OF QUALITY
MDF BERNECK® E1
HDF BERNECK® E1
Medium Density Fiberboard
High Density Fiberboard
UnitsProperties
mmThickness
mmLength and Width (Maximum)
mm/mSquareness (Maximum)
%Average Density - Variation
N/mm²Internal Bond (Minimum)
N/mm²Modulus of Rupture - MOR (Minimum)
N/mm²Modulus of Elasticity - MOE (Minimum)
%24 Hour Thickness Swell (Maximum)
%Residual Moisture Content
mg/100gFormaldehyde Emissions – Class E2
Thickness (mm)
HDF MDF
1,8 to 2,5
CQ.: 008 REV.: 001 MAY 10TH, 2017
> 2,5 to 4,0
± 0,2
The parameters indicated in this Certificateof Quality refer to values specified in NBR 15.316-2:2014. The tests results performed by BERNECK, according to standard procedures and methodologies, are in compliance and exceed the specifications listed below.
0,65
23
NA
45
0,65
23
NA
35
0,65
23
2.700
30
0,65
23
2.700
17
0,60
22
2.500
15
0,55
20
2.200
12
0,55
18
2.100
10
± 0,3± 0,2
± 5,0
≤ 2,0
± 7
4 a 11
> 8 ≤ 30
> 4,0 to 6,0
> 6,0 to 9,0
> 9,0 to 12,0
> 12,0 to 19,0
> 19,0 to 30,0
Contact Information: Telephone number: (+55) 41 2109-1629 | e-mail: [email protected] by: Mario Fabiano Borin | Quality and Development ManagerPrepared by: Soraia Mazur | Quality and Development Supervisor
CERTIFICATE OF QUALITY
MDF BERNECK®
HDF BERNECK®
Medium Density Fiberboard
High Density Fiberboard
Top Related