Contents
Taguan 130
ABS hand held enclosure for data acquisition and instrumentation Page 2 - 5
Taguan 180/230
ABS hand held enclosure for data acquisition and instrumentation Page 6 - 13
Beluga 380
Polyamide hand held enclosure for MCR- and automation engineering Page 20 - 23
Pilot 250
Polyamide hand held enclosure for MCR- and automation engineering Page 24 - 27
Pilot 110-150
Polyamide hand held enclosure for automation and control engineering Page 36 - 39
Beluga 180/220
Polyamide hand held enclosure for MCR- and automation engineering Page 14 - 19
Pilot 50
Polyamide/PVC hand held enclosure for MCR- and automation engineering Page 28 - 31
Pilot 10/20/30
Hand held enclosure for MCR- and automation engineering Page 32 - 35
Limanda
Polyamide hand held enclosure for data acquisition, MCR- and automation engineering Page 40 - 45
www.klinkmann.com
www.klinkmann.com
Hand-Held Enclosures
Taguan 130
• ABS hand held enclosure for data acquisition and instrumentation• With integrated battery compartment• Version with or without display opening• Prepared for acceptance of keypads• 2 depth variants• Optional EMC version with internal coating
Included in delivery5-piece enclosure with top and base, batterycompartment, battery compartment cover,head and shaft surround, fixing andenclosure screws. Open version incl. displayscreen and punched seal.
Technical data
Material:
ABS
Ingress protection:
IP 40, EN 60529
Disruptive strength:
24 KV/mm to DIN 53481
Surface resistance:
4 x 1014 Ohm to DIN 53482
Flammability:
HB nach UL 94
Temperature range:
-40°C to +80°C
Colour:
green-blue, similar to RAL 5020
2www.klinkmann.com
Compontents mounting optionsComponent options Type T130 FO Type T130 FG Type T130 TO Type T130 TG
Display max. view area 45 x 17,4 mm • •
max. mounting dimensions 65 x 29 mm
Chipcard reader in head section • • • •
Scanner • • • •
PCMCIA slot • • • •
D-Sub interface 9-pin • • • •
D-Sub interface 15-pin • • • •
9V battery • • • •
4 R3 micro-cells (AAA) • • • •
1. PCB (main board) • • • •
2. PCB (adapter board) • •
Membrane keypad • • • •
Taguan 130
Programme rangeEnclosure type Order No. Version Dimensions Weight
W x L x H (mm) (kg)
Taguan 130 FO 27.01 02 00 flat, open 80/70 x 125 x 36,7 0,08
Taguan 130 FG 27.01 02 01 flat, closed 80/70 x 125 x 36,7 0,085
Taguan 130 TO 27.01 02 10 deep, open 80/70 x 125 x 46,7 0,085
Taguan 130 TG 27.01 02 11 deep, closed 80/70 x 125 x 46,7 0,09
Electromechanical and electronic componentsUpon request we can supply enclosures readyequipped with electromechanical and electroniccomponents such as display, chipcard-acceptor,interface modules etc.
AccessoriesBattery holder 4 micro-cells (AAA) 27.01 02 80
Battery holder 9 V Monoblock 27.01 02 81
Clip 27.01 02 82
Keypad FT 130b, 12 matrix printed keys 82.10 00 01
Keypad FT 130e, 12 matrix keys with plug in unit 82.01 00 02
Surround in enclosure colour 27.01 02 85
Surround transparent 27.01 02 86
Surround for infrared 27.01 02 87
Spare display screen set 27.01 02 88
Spare screw set 27.01 00 90
Scratch resistant display screen on request
Push-button and switches see page 55 - 60 on request
3www.klinkmann.com
Taguan 130
Dimensions
Type Version Order No.
Taguan 130 FO flat, open 27.01 02 00
Taguan 130 FG flat, closed 27.01 02 01
Type Version Order No.
Taguan 130 TO deep, open 27.01 02 10
Taguan 130 TG deep, closed 27.01 02 11
(max. PCB size of displays ca. 65 x 29 mm)
(max. PCB size of displays ca. 65 x 29 mm)
Free dimension tolerance to DIN 16901-110* = Open version** = PCB mounting boss (screw 2.5 x 5)
Free dimension tolerance to DIN 16901-110* = Open version** = PCB mounting boss (screw 2.5 x 5)
4www.klinkmann.com
Membrane keypads12 keys, printed version or plain with insertion facility for custom inscription
ClipMetal clip to snap onto battery compartment lid
Order No. 27.01 02 82
Customized membrane keypads on request.
Coverfor use as head or shaft cover
Version Order No.
in enclosure colour 27.01 02 85
transparent clear 27.01 02 86
for infrared 27.01 02 87
Units per pack: 1 pc
Battery holderfor mounting in the bottom part, for 4 micro-cells R03 side by side or connection contact for9 V battery
Version Order No.
for R03 micro-cells 27.01 02 80
for 9 V battery 27.01 02 81
Type Version Order No.
FT T130b Matrix printed 82.10 00 01
FT T130e Matrix with insertion facility 82.10 00 02
Taguan 130
Accessories
Exte
rna
l side
cab
le o
utl
et f
rom
ed
ge
5 m
m
5www.klinkmann.com
Taguan 180/230
• ABS hand held enclosure for data acquisition and instrumentation• With integrated battery compartment• Version with or without display openings• Prepared for acceptance of keypads/silicone switch mats• Optional EMC version with internal coating
Included in deliveryEnclosure with top and base, keyboardsurround, head and shaft surround,fastening and enclosure screws. Openversion incl. display screen and punchedseal.Please order battery compartmentseparately.
Technical data
Material:
ABS
Ingress protection:
IP 40, EN 60529
Disruptive strength:
24 KV/mm to DIN 53481
Surface resistance:
4 x 1014 Ohm to DIN 53482
Flammability:
HB to UL 94
Temperature range:
-40°C to +80°C
Colour:
Upper/lower mould, battery compartment cover,
head/shaft surround:
green blue, similar to RAL 5020
keyboard surround, battery compartment/
battery pack:
black-grey, similar to RAL 7021
6www.klinkmann.com
Taguan 180/230
Programme rangeEnclosure type Order No. Version Dimensions Weight
W x L x H (mm) (kg)
Taguan 180 O 27.01 04 00 open 84/70 x 180 x 52.5/37.5 0.17
Taguan 180 G 27.01 04 01 closed 84/70 x 180 x 52.5/37.5 0.12
Taguan 230 O 27.01 06 00 open 97/70 x 229 x 52.5/37.5 0.15
Taguan 230 G 27.01 06 01 closed 97/70 x 229 x 52.5/37.5 0.16
AccessoriesBattery holder for 9 V monoblock
Surround in enclosure colour
Surround transparent
Surround for infrared
Battery compartment empty, 0.03 kg
Battery pack NiCd 4,8 V / 1000 mAh
Battery pack NiMH 4,8 V / 1650 mAh
Battery pack NiMH 4,8 V / 2100 mAh
Battery charging station 230 V
Battery charging station without connector charger
Connector charger with Euro primary adapter
UK primary adapter
USA/Japan primary adapter
Battery charging station for connector charger (85.00 00 07)
Docking station without connector charger
Docking station with connector charger
Angle brackets for PCBs for docking station
Spring contact, 2-pole
Wrist strap
27.01 04 80
27.01 06 80
27.01 00 95
27.01 04 81
27.01 06 81
27.01 04 84
27.01 06 84
27.01 04 88
27.01 06 88
27.01 00 90
27.01 00 85
27.01 00 87
27.01 00 89
27.01 00 91
27.01 00 92
27.01 00 93
on request
on request
27.01 00 94
27.01 02 85
27.01 02 86
27.01 02 87
27.01 00 80
27.01 00 81
85.80 00 11
85.80 00 15
27.01 00 86
27.01 00 88
85.80 00 07
85.80 00 16
85.80 00 08
85.80 00 10
27.01 00 96
27.01 00 97
27.01 00 98
27.01 00 82
27.01 00 83
Display fixing set (T 180)
Display fixing set (T 230)
Switch mat set 12 keys
Switch mat set 24 keys
Switch mat set 36 keys
Hand strap (T 180)
Hand strap (T 230)
Spare display screen set (T 180)
Spare display screen set (T 230)
Spare screws
Head cover, stepped, in enclosure colour
Head cover, stepped, for infrared
Head cover, stepped, transparent
Head cover, straight, in enclosure colour
Head cover, straight, transparent
Head cover, straight, for infrared
Scratch resistant display screen
Push-button and switches see page 55 - 60
Electromechanical and electronic componentsUpon request we can supply enclosures readyequipped with electromechanical and electroniccomponents such as display, chipcard-acceptor,interface modules etc.
Compontents mounting optionsComponent options Type Type Type Type
T180 O T180 G T230 O T230 G
Display (max. view area 56 x 33 mm; max. mounting dimensions 66 x 46 mm) •
Display (max. view area 66 x 43 mm; max. mounting dimensions 78 x 56 mm) •
Chipcard reader in head section • • • •
Chipcard reader in shaft section • • • •
Magnetic card reader • • • •
Scanner • • • •
PCMCIA slot • • • •
D-Sub interface 9-pin • • • •
D-Sub interface 15-pin • • • •
D-Sub interface 25-pin • • • •
Battery pack 1000 mAh / 1650 mAh / 2100 mAh • • • •
4 micro-cells R6 (AA) • • • •
9 V battery • • • •
1st board (main board) • • • •
2nd board (adapter board) • • • •
Membrane keypad • • • •
switching mat, 12 keys, in combination with keypad plate • • • •
Switching mat, 24 keys • •
Switching mat, 36 keys • •
7www.klinkmann.com
Taguan 180/230
Dimensions
Type Version Order No.
Taguan 180 O open 27.01 04 00
Taguan 180 G closed 27.01 04 01
Type Version Order No.
Taguan 230 O open 27.01 06 00
Taguan 230 G closed 27.01 06 01
(max. PCB size of displays ca. 78 x 56 mm)
(max. PCB size of displays ca. 66 x 46 mm)
Free dimension tolerance to DIN 16901-110* = Open version** = PCB mounting boss (screw 2.5 x 5)
Free dimension tolerance to DIN 16901-130* = Open version** = PCB mounting boss (screw 2.5 x 5)
8www.klinkmann.com
Taguan 180/230
Accessories
Battery compartment emptyconsisting of battery compartment and lid space for 4 micro-cells R6 (AA) side by side
Order No. 27.01 00 80
Battery packNi-Cd easy-change storage battery ready mounted
Battery holderfor mounting in the bottom part for 9 V battery.
Order No. 27.01 00 94
contact
contact
Version Nominal voltage (V) Capacity (mAh) Order No.
Battery pack NiCD 4,8 1000 27.01 00 81
Battery packNiMH 4,8 1650 85.80 00 11
Battery pack NiMH 4,8 2100 85.80 00 15
9www.klinkmann.com
Taguan 180/230
Battery charging stationQuick-charger for battery pack 27.01 00 81
Connection voltage Order No.
230 V with Euro connector 27.01 00 86
without connector charger 27.01 00 88
Battery chargerwith Euro primary adapter
Order No. 85.80 00 07
Accessories Order No.
UK-primary adapter 85.80 00 16
USA/Japan-primary adapter 85.80 00 08
Accessories
ca. 147 incl. battery pack
cable length 2 m
cable length 2 m
Euro UK USA/Japan
10www.klinkmann.com
Spring contact 2-pol.Counter-contacts for the battery pack (Company Bourns, type 70ADJ002ML1), for mounting inenclosure bottom part
Order No. 27.01 00 82
Taguan 180/230
Accessories
Battery charging stationfor connector charger (85.80 00 07)
Order No. 85.80 00 10
Docking stationWith parallel operation of both load pits additional battery charger is necessary
Version Order No.
without connector charger 27.01 00 96
with connector charger 27.01 00 97
ca. 147 battery pack
cap screw M4x8 (2x)
cap screw M4x8 (2x)
11www.klinkmann.com
Head cover
Version Order No.
stepped in enclosure colour 27.01 00 85
stepped transparent clear 27.01 00 89
stepped for infrared 27.01 00 87
even in enclosure colour 27.01 00 91
even transparent clear 27.01 00 92
even for infrared 27.01 00 93
even stepped
units per pack: 1 pc
Shaft cover
Version Order No.
in enclosure colour 27.01 02 85
transparent clear 27.01 02 86
for infrared 27.01 02 87
units per pack: 1 pc
Taguan 180/230
Accessories
external side external side
exte
rna
l side
12www.klinkmann.com
Hand strapwith Velcro fastener for adjustment, consistingof holding strap, adapter and screws
Wrist strapto prevent falling down, or as carrying aid
Order No. 27.01 00 83
Version for Order No.
Taguan 180 27.01 04 84
Taguan 230 27.01 06 84
Taguan 180/230
Display fixing setfor variable display mounting
Version for Order No.
Taguan 180 27.01 04 80
Taguan 230 27.01 06 80
Switching mat setconsisting of keypad plate, silicone switching mat and keypad circuit board with connecting cable
for type No. of keys Order No.
Taguan 180/230 12*/** 27.01 00 95
Taguan 180 24** 27.01 04 81
Taguan 230 36 27.01 06 81
* Please remember the modification of the toppart for the flat cable** Please not different heights by combination with closed cover
Accessories
13www.klinkmann.com
• Polyamide hand held enclosure for MCR- and automation engineering• Ergonomic enclosure shape• Version with or without display opening• Prepared for acceptance of keypads/silicone switch mats• Optional EMC version with internal coating and EMC seal
Included in deliveryDouble-skinned enclosure with top and baseunit, each with fixing domes, fastening andenclosure screws.Open version incl. display screen andpunshed seal.
Technical data
Material:
Polyamide
Ingress protection:
IP 65, EN 60529
Disruptive strength:
> 7 Joule to DIN 50014
Surface resistance:
1012 Ohm to DIN 53482
Flammability:
V2 to UL 94
Temperature range:
-40°C to +60°C
Colour:
black-grey, similar to RAL 7021
Beluga 180/220
14www.klinkmann.com
Beluga 180/220
Programme rangeEnclosure type Order No. Version Dimensions Weight
W x L x H (mm) (kg)
Beluga 180 O 27.02 02 00 open 106/75 x 187 x 50 0.16
Beluga 180 G 27.02 02 01 closed 106/75 x 187 x 50 0.17
Beluga 220 O 27.02 04 00 open 116/85 x 220 x 51 0.20
Beluga 220 G 27.02 04 01 closed 116/85 x 220 x 51 0.21
AccessoriesHook set without magnet
Hook set with magnet
Keypad FT 180b, 15 keys, Matrix printed (B 180)
Keypad FT 180ge, 12 keys, Matrix with plug-in unit (B 180)
Keypad FT 180e, 15 keys, Matrix with plug-in unit (B 180)
Keypad FT 220b, 18 keys, Matrix printed (B 220)
Keypad FT 220e, 18 keys, Matrix with plug-in unit (B 220)
Display fixing set (B 180)
Display fixing set (B 220)
Cable gland with bending protection M 16 x 1,5
Cable gland with bending protection M 20 x 1,5
Hand strap
Spare screws
Spare display screen set (B 180)
Spare display screen set (B 220)
Battery compartment
Battery holder for 4 round cells for battery compartment
Battery holder for 9 V battery for battery compartment
Wall fixing for hook set
Scratch resistant display screen
Push-botton and switches see page 55 - 60
27.02 00 80
27.02 00 81
82.10 00 03
82.10 00 07
82.10 00 04
82.10 00 05
82.10 00 06
27.01 06 80
27.02 04 82
08.10 01 16
08.10 01 20
27.02 00 83
27.02 00 82
27.01 06 88
27.02 04 83
27.02 00 85
27.02 00 86
27.02 00 87
27.02 00 84
on request
on request
Compontents mounting optionsComponent options Type B180 O Type B180 G Type B220 O Type B220 G
Display max. view area 42 x 65 mm •
max. mounting dimensions 56,4 x 74 mm or 54 x 80 mm
Display max. view area 49 x 78 mm •
max. mounting dimensions 71,5 x 84 mm or 70,5 x 86 mm
Emergency stop button • • • •
Confirm key • • • •
Hand wheel • •
Step switch • •
Joy stick • •
Cable outlet up to M 16 • • • •
Cable outlet up to M 20 • •
1st board (main board) • • • •
Other boards • • • •
Electromechanical componentsOn request, we offer the enclosures readyequipped with electromechanical componentssuch as emergency stop button, confirm keys,hand wheel, step switch, display.
15www.klinkmann.com
Beluga 180/220
Dimensions
Type Version Order No.
Beluga 180 O open 27.02 02 00
Beluga 180 G closed 27.00 02 01
Type Version Order No.
Beluga 220 O open 27.02 04 00
Beluga 220 G closed 27.02 04 01
(max. PCB size of displays ca. 84 x 71.5 mm or 86 x 70.5 mm)
(max. PCB size of displays ca. 74 x 56.4 mm or 80 x 54 mm)
Free dimension tolerance to DIN 16901-130* = Cutout dimension** = PCB mounting boss (screw 3 x 8)
Free dimension tolerance to DIN 16901-130* = Cutout dimension** = PCB mounting boss (screw 3 x 8)
16www.klinkmann.com
Membrane keypads for Beluga 180Standard membrane keypad with 15 keys as printed version or plain. Insertion facility for custominscription
Type Version Order No.
FT B180 - 15 b Matrix printed 82.10 00 03
FT B180 - 15 e Matrix with insertion facility 82.10 00 04
Membrane keypads for Beluga 220Standard membrane keypad with 18 keys as printed version or plain. Insertion facility for custominscription
Type Version Order No.
FT B220 - 18 b Matrix printed 82.10 00 05
FT B220 - 18 e Matrix with insertion facility 82.10 00 06
Beluga 180/230
Accessories
Dis
tan
ce 7
.5 m
m t
o e
dg
eD
ista
nce
7.5
mm
to
ed
ge
17www.klinkmann.com
Hook setconsisting of mounted hook and fixing screws
Display fixing setfor variable display mounting
Version Order No.
without magnet 27.02 00 80
with magnet 27.02 00 81
Version for Order No.
Beluga 180 27.01 06 80
Beluga 220 27.02 04 82
Beluga 180/220
Accessories
Membrane keypads for Beluga 180Standard membrane keypad with 12 keys as plain version. Insertion facility for custom inscription
Type Version Order No.
FT B180 - 12 ge common connection with insert vacility 82.10 00 07
Dis
tan
ce 7
.5 m
m t
o e
dg
e
Adhesion by version with magnet
plate thickness force
2 mm 20 N
5 mm 30 N
18www.klinkmann.com
• Polyamide hand held enclosure for MCR- and automation engineering• Ergonomic enclosure shape• Prepared for acceptance of keypads/silicone switch mats• Optional EMC version with internal coating and EMC seal
Included in deliveryDouble-skinned enclosure with top and baseunit, each with fixing domes, mounting /hook set, fastening and enclosure screws.
Technical data
Material:
Polyamide
Ingress protection:
IP 65, EN 60529
Disruptive strength:
> 7 Joule to DIN 50014
Surface resistance:
1012 Ohm to DIN 53482
Flammability:
V2 to UL 94
Temperature range:
-40°C to +60°C
Colour:
black-grey, similar to RAL 7021
Beluga 380
20www.klinkmann.com
Beluga 380
Wall fixing setstainless steel angle bracket set,+/- 45° inclination slope adjustable by means ofknurled screws.
Order No. 27.02 05 82
Electromechanical componentsOn request, we can supply equipment fitted withelectro-mechanical components such asemergency stop button, acknowledge keys, handwheel, switches, display
Component mounting optionsComponent options Type B380
Display (max. view area / max. mounting dimensions see drawing on page 55 - 60) •
Emergency stop button •
Confirm key •
Acknowledge key •
Hand wheel •
Step switch •
Joy stick •
Cable outlet up to M 20 •
1st board (main board) •
Other boards •
Programme rangeEnclosure type Order No. Version Dimension Weight
W x L x H (mm) (kg)
Beluga 380 27.02 05 01 closed 380 x 117 x 68 0.52
AccessoriesCable gland with bending protection M 16 x 1,5
Cable gland with bending protection M 20 x 1,5
Carrying strap
Hand strap
Wall holder
Spare screws
Push-button and switches see page 55 - 60
08.10 01 16
08.10 01 20
27.02 05 80
27.02 05 81
27.02 05 82
27.02 05 83
on request
21www.klinkmann.com
Beluga 380
Free dimension tolerance to DIN 16901 - 130* = PCB mounting boss (screw 3 x 8 )
Dimensions
Order No. 27.02 05 01
22www.klinkmann.com
Large displays mounted (1/4 VGA) Integrated hook set
Large mounting space for electronic devices Hook set, can be used as a stand
Beluga 380
23www.klinkmann.com
• Polyamide hand held enclosure for MCR- and automation engineering• Large fitting space• Version with closed or front frame cover• Rear battery compartment• Optional EMC version with internal coating and EMC seal
Included in deliveryDouble-skinned enclosure with top and baseunit, each with fixing domes, batterycompartment cover, fastening and enclosurescrews
Technical data
Material:
Polyamide
Ingress protection:
IP 65, EN 60529
Impact resistance:
> 7 Joule to DIN 50014
Temperature range:
-40°C to +60°C
Colour:
Base and lid:
black-grey, similar to RAL 7021
Rear cover:
sapphire-blue, similar to RAL 5003
Pilot 250
24www.klinkmann.com
Pilot 250
Electromechanical componentsOn request, we can supply equipment fitted withelectro-mechanical components such asemergency stop button, acknowledge keys, handwheel, switches, display
Programme rangeEnclosure type Order No. Version Dimensions Weight
Type upper liner W x L x H (mm) (kg)
Pilot 250/1 29.25 00 01 closed 140/120 x 280 x 86 0.7
Pilot 250/2 29.25 00 02 as frame for front panel mounting 140/120 x 280 x 86 0.46
AccessoriesFront panel, aluminium for Pilot 250/2
Magnet holder round
Battery holder for fixing in the enclosure base for 4 round cells
Battery holder for fixing in the enclosure base for 9V battery
Wall fixing (2 hooks, 2 bolts with screws)
Cable gland with bending protection M 16 x 1,5
Cable gland with bending protection M 20 x 1,5
Push button and switches see page 55 - 60
29.25 01 01
29.25 01 02
29.25 01 03
29.25 01 04
29.25 01 05
08.10 01 16
08.10 01 20
on request
Battery holderfor fixing in enclosure base for 4 micro-cells R6or 9 V monobloc battery
25www.klinkmann.com
Pilot 250
Dimensions
Type Version Order No.
Pilot 250/1 closed 29.25 00 01
Pilot 250/2 lid frame 29.25 00 02
Closed lid Lid frame
(total hight)
Lid
Free dimension tolerance to DIN 16901 - 130* = Concial form tapering downwards
26www.klinkmann.com
Pilot 250
Pilot with membrane keypad Rear cover
Wall fixing device
Large mounting space for electronic assemblies
Cable glandMagnetic holder
27www.klinkmann.com
• Polyamide / PVC hand held enclosure for MCR and automation engineering• Large fitting space• Variable length using profile technology• Optional EMC version with internal enclosure in aluminium
Included in deliveryEnclosure system consisting of Polyamideinternal enclosure with end covers, twoside PVC cover profiles, Alucobondcomposite front panel, rear panel, 2external end covers, with M 25 x 1,5threaded hole for cable gland
Technical data
Material:
Polyamide / PVC
Ingress protection:
IP 65, EN 60529
Impact resistance:
> 7 Joule to DIN 50014
Temperature range:
-20°C to +70°C
Colour:
End covers: yellow, similar to RAL 1021
PVC-section: black, similar to RAL 9005
Pilot 50
28www.klinkmann.com
Pilot 50
Programme rangeExt. encl. dimensions Standard EMC complete Standard Standard Standard Standard
W x L x H (mm) complete enclosure body rear panel front panel rear panel
with front panel seperate separate recessed
191 x 280 x 76 29.11 10 00* 29.14 10 00 29.11 00 00 29.11 00 01 29.11 00 02 -
191 x 330 x 76 29.12 10 00 29.15 10 00 29.12 00 00 29.12 00 01 29.12 00 02 -
191 x 440 x 76 29.13 10 00 29.16 10 00 29.13 00 00 29.13 00 01 29.19 00 02 29.13 00 03
Special length 29.19 10 00 29.17 10 00 29.19 00 00 29.19 00 01 29.19 00 02 -
AccessoriesCable gland with bending protection M 25 x 1,5
Cable gland reduction M 25 / M 12
Cable gland reduction M 25 / M 16
Cable gland reduction M 25 / M 20
Spring nuts M4 for internal fixing, set of 4 pcs
PCB fixings, set of 4 pcs incl. spring nuts
Wall holder (set single)
Magnetic wall fixing, 1 pc
Wall fixing
Push button and switches see page 55 - 60
08.10 01 25
08.01 25 12
08.01 25 16
08.01 25 20
29.00 00 50
29.00 00 60
29.00 00 70
29.00 00 80
29.00 10 00
on request
* Modification for fitting of Siemens OP7 on request (ingress protection IP 54)
Electromechanical componentsOn request, we can supply equipment fitted withelectro-mechanical components such asemergency stop button, acknowledge keys, handwheel, switches, display
29www.klinkmann.com
Pilot 50
Dimensions
Standard EMC Dimensions Weight (kg)
29.11 10 00 29.14 10 00 280 x 191 x 76 1,34
29.12 10 00 29.15 10 00 330 x 191 x 76 1,52
29.13 10 00 29.16 10 00 440 x 191 x 76 1,94
29.19 10 00 29.17 10 00 Special length
Type A B C D G
29.11 10 00 274 - 92 240 105/127
29.12 10 00 324 162 81 290 105/127
29.13 10 00 434 217 109 400 105/127
Custom size, A < 300 mm enclosure length - 6 - A/3 A - 34 105/127
Custom size, A > 300 mm enclosure length - 6 A/2 A/4 A - 34 105/127
Special versionrear panel, recessedfor type 29.13 00 00
Suspension unitfor wall fitting
Front panel Rear panel
Wal
l fi
ttin
g
Att
ach
men
t le
ng
th =
en
cl.
len
gth
- 4
0 m
m
Encl
osu
re l
eng
th =
var
iab
le
max. available space
Free dimension tolerance to DIN 16901 - 140
30www.klinkmann.com
Set of spring nutsSpring nuts for internal mounting; set = 4 pcs
Order No. 29.00 00 50
Circuit board fittingSet = 4 pcs with spring nuts
Order No. 29.00 00 60
Wall fitting
Order No. 29.00 00 70
Accessories
Pilot with small control device Inner T-slots offer mounting facilities on allsides
EMC version Variable fittings
Pilot 50
31www.klinkmann.com
Pilot 10/20/30
• Hand held enclosure for MCR and automation engineering• Robust design (Polyamide or Polyester)• Version with handle and integrated cable entry (Pilot 10, 20 standard)
Included in deliveryPilot 10/20: enclosure with handle,including cable gland M 20 x 1,5, frontpanel with fastening screw and wallholder
Pilot 30: two-part Polyester enclosurewith self-adhesive aluminium frontpanel, enclosure screws and wall holder
Technical data
Material:
Pilot 10 and Pilot 20: Polyamide
Pilot 30: Polyester
Ingress protection:
Pilot 10 and Pilot 20: IP 65 to EN 60529
Pilot 30: IP 66 to EN 60529
Impact resistance:
> 7 Joule to DIN 50014
Temperature range:
Pilot 10 and Pilot 20: -40°C to +60°C
Pilot 30: -25°C to +90°C
Colour:
yellow, similar to RAL 1021
32www.klinkmann.com
Pilot 10/20/30
Programme rangeEnclosure type Order No. Encl. dimensions incl. handle Front panel dimensions Mounting depth
W x L x H (mm) W x H (mm) (mm)
Pilot 10 29.40 02 00 70 x 93 x 190 61 x 59 67
Pilot 20 29.30 01 00 115 x 93 x 200 106 x 69 67
Pilot 30 29.50 01 00 164 x 116 x 295 70 x 280 71
AccessoriesMounting plate Pilot 20 29.31 00 00
Wall holder (2 pcs with screws) 29.60 01 00
Cable gland M 25 x 1,5 08.10 01 25
Push button and switches see page 55 - 60 on request
Electromechanical componentsOn request, we can supply equipment fitted withelectro-mechanical components such asemergency stop button, acknowledge keys, handwheel, switches, display
33www.klinkmann.com
M20M20
Pilot 10 Pilot 20
Free dimension tolerance to DIN 16901 - 140
Free dimension tolerance to DIN 16901 - 140
Pilot 10/20/30
Dimensions
Type Order No. Weight (kg)
Pilot 10 29.40 02 00 0,270
Pilot 20 29.30 01 00 0,320
Type Order No. Weight (kg)
Pilot 30 29.50 01 00 1,6
34www.klinkmann.com
Pilot 10/20/30
Accessories
Mounting plate Pilot 20
Order No. 29.31 00 00
Wall holderSet complete with 2 fittings and screws
Order No. 29. 60 01 00
One and two button enclosures Pilot 10 / Pilot 20 Integrated handles on Pilot 10 and Pilot 20 Multi button enclosure Pilot 30
35www.klinkmann.com
Technical data
Material:
Polyamide
Ingress protection:
IP 65 to EN 60529
Impact resistance:
> 7 Joule to DIN 50014
Temperature range:
-40°C to +60°C
Colour:
yellow, similar to RAL 1021
• Polyamide hand enclosure for automation and control technology• Version with handle and integrated cable exit• Large fitting space
Included in deliveryEnclosure with handle, including cablegland M 20 x 1.5, front panel, enclosureand front panel screws, and wall holder
Pilot 110 - 150
36www.klinkmann.com
Programme rangeEnclosure type Order No. Encl. dimensions incl. handle Front panel dimensions Mounting depth
W x L x H (mm) W x H (mm) (mm)
Pilot 110 29.21 10 00 85 x 85 x 191 77 x 77 63.5
Pilot 120 29.21 20 00 115 x 85 x 191 107 x 77 63.5
Pilot 130 29.21 30 00 85 x 85 x 221 77 x 107 63.5
Pilot 140 29.21 40 00 160 x 85 x 211 152 x 97 63.5
Pilot 150 29.21 50 00 105 x 85 x 266 97 x 152 63.5
AccessoriesMagnetic holder (for Pilot 120 - 150) 29.00 00 80
Push button and switches see page 55 -60 on request
Electromechanical componentsOn request, we can supply equipment fitted withelectro-mechanical components such asemergency stop button, acknowledge keys, handwheel, switches, display
Pilot 110 - 150
37www.klinkmann.com
M20
M20 M20
Pilot 110 - 150
Dimensions
Type Order No. Weight (kg)
Pilot 110 29.21 10 00 0,307
Type Order No. Weight (kg)
Pilot 120 29.21 20 00 0,341
Pilot 130 29.21 30 00 0,341
Pilot 120 Pilot 130
Free dimension tolerance to DIN 16901 - 140
Free dimension tolerance to DIN 16901 - 140
38www.klinkmann.com
M20M20
Pilot 110 - 150
Dimensions
Type Order No. Weight (kg)
Pilot 140 29.21 40 00 0,434
Pilot 150 29.21 50 00 0,434
Pilot 150Pilot 140
Magnetic holderfor Pilot 120 - 150, self-adhesive
Order No. 29. 00 00 80
Accessories
Free dimension tolerance to DIN 16901 - 140
39www.klinkmann.com
• Polyamide hand held enclosures for data acquisition,MCR and automation engineering
• 2 sizes - 270 x 248 x 64 mm to 311 x 281 x 72 mm• Large fitting area• For installations and command devices mobile and
stationary applicable• Variable mounting depths
Included in delivery:Double-skinned enclosure with upper andlower mould, each with fixing domesincl. seals and border profile,Limanda I: 3 cover flaps for interfacegarages, screws and fixing materials forfront panel mounting.
Technical data
Material:
Enclosure: Polyamide
Border profile: NBR, black
Colour:
RAL 7021 black-grey
Ingress protection:
IP 65 to EN 60529
EMC:
Optional
Temperature range:
-20°C to +60°C
Surface resistance:
1012 Ohm to DIN 53482
Impact resistance:
>7 Nm to EN 50014
Flammability:
V2 to UL 94
Limanda
40www.klinkmann.com
Limanda I for OP17 -Supplied ready for installation of the SiemensOP17 Operator Panel without additional fittingmaterials.
Limanda enclosure systems enable installation ofmany manual operation panels.
Limanda
Product rangeOrder No. Enclosure type Dimensions, W x L x H (mm) Weight (kg)
27.03 03 00 Limanda I 311 x 281 x 72 0.9
27.03 03 01 Limanda I EMC 311 x 281 x 72 1.0
27.03 03 17 Limanda I for OP17 311 x 281 x 97 1.4
27.03 02 00 Limanda II 270 x 248 x 64 0.7
AccessoriesOrder No.
Limanda I Aluminium front panel, natural anodised finish 27.03 03 80
Dimensions 269 x 199 x 3 mm, max. connector area 257 x 182 mm
Limanda I EMC front plate 27.03 03 90
Limanda II Aluminium front plate, natural anodised finish 27.03 02 80
Limanda I Intermediate frames 27.03 03 81
Limanda II mounting set for Siemens TP 170 / TP 070 27.03 02 82
Limanda I EMC intermediate frame 27.03 00 88
Limanda I handle set without push button 27.03 00 83
Limanda holder 27.03 00 84
Limanda I carrying strap 27.03 00 85
Limanda I quiver 27.03 00 86
Limanda II table stand (set = 2 pcs.) 27.03 00 87
Limanda II quiver 27.03 00 89
Limanda I handle set with 3-stage push button (right-hand version) 85.70 10 01
Limanda I handle set with 3-stage push button (left-hand version) 85.70 10 02
Cable connection with bending protection M 16 08.10 01 16
Cable connection with bending protection M 20 08.10 01 20
Cable connection with bending protection M 25 08.10 01 25
Inclination adapter for mounting directly on wall or machine 50.02 00 01
Inclination adapter for mounting directly onto GT 48/2 tube 50.02 00 02
Inclination adapter for mounting directly onto GTK electronic tube 50.02 00 03
Inclination adapter for mounting directly onto GT /2 or GTK electronic 50.02 00 04
Inclination adapter for Limanda bracket on GT 48/2 tube 50.02 00 05
Inclination adapter for Limanda bracket on GTK electronic tube 50.02 00 06
Inclination adapter for Limanda bracket on wall or machine 50.02 00 07
Push button and switches see page 55 - 60 on request
Limanda IIwith fitted command unit
41www.klinkmann.com
Limanda
With intermediate frame + 25 mm
Dimensions
Limanda I
Limanda II
Inner space reduced byinternal dome
Free dimension tolerance to DIN 16901 - 130
Free dimension tolerance to DIN 16901 - 130
42www.klinkmann.com
Limanda
Accessories
Limanda I handle setFor installation on all four rear corners of the enclosure. The handle incorporates a steppedengaging mechanism which allows it to be optimally adjusted for the operator duringinstallation.IP 65 once assembled.
Order No. 27.03 00 83
Limanda I handle set with 3-stage acknowledge key(2-channel) for use in service, set up and programming operations.Included in delivery: handle set with fixed acknowledge key
Order No. Type
85.70 10 01 Right-hand version (see figure)
85.70 10 02 Left-hand version
Limanda quiverWall holder - adjustable in width and length,can be adapted to inclining adapter.Material sheet steel. For version withoutintermediate frame
Order No. for version
27.03 00 86 Limanda I
27.03 00 89 Limanda II
Technical data see page 55 - 60
max. installation height
total height
Section A-A
Section B-B
43www.klinkmann.com
Carrying strapThe 30 mm wide woven strap can be adjustedfrom length 900 to 1600 mm.
Order No. 27.03 00 85
Cable connection with bending protection (no lock nut)
Order No. Type
08.10 01 16 M 16 cable connection with bending protection
08.10 01 20 M 20 cable connection with bending protection
08.10 01 25 M 25 cable connection with bending protection
Technical data
Material Polyamide
Moulded seal NBR
Enclosure rating IP 65
Temperature range -40°C to +100°C
Colour RAL 9005 black
Limanda
Accessories
Limanda I intermediate framesTo increase the mounting depth from 46 mmto 71 mm (with an intermediate frame) and/or to 96 mm (with two intermediate frames).
Order No. 27.03 03 81
Limanda holderEnables rapid removal of the Limanda fromthe inclination adapter (for Limanda I and II).There is a gap of 19.5 mm between theLimanda and the holder for assemblypurposes.
Order No. 27.03 00 84
Limanda
Inclination adapter
Order No. Type Weight (kg)
50.02 00 01 For mounting directly to wall or machine 1.3
50.02 00 02 For mounting directly to GT 48/2 tube 1.0
50.02 00 03 For mounting directly to GTK electronic tube 1.0
50.02 00 04 For installation to GT 48/2 or GTK electronic coupling 0.9
Technical data
Material 2.5 mm sheet steel
Bellow PVC (T-50M), RAL 9005 (black)
Surface black powder-coated
Temperature range -40°C to +60°C
Stepped engaging mechanism 22,5°-steps
44www.klinkmann.com
Limanda
Drilling map either side of the inclination adapterfor the Limanda holder
Dimensions (wall mounted version)
Accessories
Limanda I inclining adapter for holder
Order No. Type Weight (kg)
50.02 00 05 for mounting directly to GT 48/2 tube 0.8
50.02 00 06 for mounting directly to GTK electronic tube 0.8
50.02 00 07 for mounting directly to wall or machine 0.5
Technical data
Material 2.5 mm sheet steel (black powder-coated)
Knurled handles reinforced thermoplastic
Temperature range -40°C to +60°C
Variant 1 Variant 2 Variant 3 Variant 4
Specific Limanda drilling map required!
www.klinkmann.com
FinlandP.O. Box 38, FI-00371 HelsinkiPh. +358 9 540 4940Fax +358 9 5413 541 [email protected]
St.Peterburg ph. +7 812 327 3752 [email protected] ph. +7 095 461 3623 [email protected] ph. + 372 6 684 500 [email protected] ph. +371 738 1617 [email protected] ph. +370 5 215 1646 [email protected]Кiev ph. +38 044 239 1250 [email protected]
Top Related