Project Number:

Revisions:

Drawn By Checked ByIssue Date

Architecture / Project Managment:

Sheet Number:

Carmel, Indiana 46032

317.705.7980 (fax)

355 City Center Drive

317.705.7979 (phone)

Architect:

Sheet Title:

Project:

Developer:

By:

WE

ST

BR

IDG

E IN

VE

ST

ME

NT

S

Ca

rme

l C

ity C

ente

r -

Su

ite 6

8742 S

. R

angelin

e R

oad, C

arm

el IN

46032

COPYRIGHT & OWNERSHIP OF DOCUMENTS

State Release Set: 5.03.2013

N

19

R @

6 2

5/3

2"

= 1

0'-8

3/4

"

18

T @

11

29

/64

" =

17

'-2

3/6

4"

UP

SCALE: 1/128"= 1'-0"

KEY PLAN

SUITE 68

PEDCOR DESIGN GROUP

A1.2

CONSTRUCTION

PLAN

AJR MC5/03/2013

THIS DOCUMENT IS AN INSTRUMENT OF SERVICES AND IS THE SOLE

PROPERTY OF THE ARCHITECT AND PEDCOR DESIGN GROUP, LLC. ALL

INFORMATION CONTAINED HEREIN IS CONFIDENTIAL. ITS SUBMISSION

AND DISTRIBUTION TO OTHER PARTIES IS NOT TO BE CONSTRUED AS

PUBLICATION IN DEROGATION OF COMMON LAW COPYRIGHT,

INTELLECTUAL PROPERTY RIGHTS OR OTHER RESERVED RIGHTS. ALL

INFORMATION CONTAINED HEREIN CONSTITUTES THE ORIGINAL AND

UNPUBLISHED WORK OF THE ARCHITECT, JAMES R. STUTZMAN, AND

PEDCOR DESIGN GROUP, LLC. NO PART OR WHOLE OF THIS DESIGN,

THESE DRAWINGS, OR THE RESULTING BUILDING OR BUILDINGS, OR

PORTIONS OF THE RESULTING BUILDING OR BUILDINGS MAY BE

DUPLICATED, COPIED, EXHIBITED, PHOTOGRAPHED, PUBLISHED,

MODIFIED OR OTHERWISE DISTRIBUTED IN ANY WAY WITHOUT THE

SPECIFIC AND PRIOR WRITTEN CONSENT OF THE ARCHITECT, JAMES R.

STUTZMAN AND PEDCOR DESIGN GROUP, LLC. © COPYRIGHT 2013

JAMES R. STUTZMAN, AIA, Carmel, Indiana.

RADIUS ALL OUTSIDE CORNERS OF COUNTER TOPS. SIZE OF RADIUS TO BE VERIFIED WITH

ARCHITECT.

13.

APPLY SEALANT AT ALL PLUMBING FIXTURES, AT JUNCTURE WITH WALL AND AT ALL

COUNTERTOPS AND BACKSPLASH JUNCTURES.

14.

15.

FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES

AS SCHEDULED.

16.

ALL WALLS SCHEDULED TO REMAIN (I.E. CORE WALLS, AND DEMISING WALLS) SHALL BE

PATCHED, REPAIRED, AND SANDED SMOOTH IN PREPARATION FOR NEW FINISHES.

17.

REFRIGERATOR PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE WATER & POWER

SOURCE FOR REFRIGERATOR. VERIFY REQUIREMENTS WITH MANUFACTURER'S MANUAL.

PROVIDE 3/4"x4'x4' FIRE RETARDANT PLYWOOD PHONE BOARD MOUNTED AT 60" A.F.F. PHONE

BOARD TO BE PAINTED WITH FIRE RETARDANT PAINT, COLOR OF PAINT TO MATCH ADJACENT

WALL FINISH.

ALIGN FINISHED FACES.

FP12

FP11

FP10

FP9

FP8

CONSTRUCTION PLAN NOTES:

FP1

FP2

FP3

FP4

FP5

FP6

FP7

GENERAL CONSTRUCTION NOTES:

DIMENSIONS ARE FROM STUD TO STUD UNLESS NOTED OR SHOWN OTHERWISE. ANY

DIMENSION NOT SHOWN OR DEEMED QUESTIONABLE ARE TO BE VERIFIED BY ARCHITECT. DO

NOT SCALE DRAWINGS.

1.

ALL WALLS SHALL BE CHALKED OFF FOR ARCHITECT'S REVIEW OF NEW WALL CONSTRUCTION.3.

4.

5.

PROVIDE CONCEALED FIRE RATED WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL

SURFACE MOUNTED ITEMS.

6.

7.

NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS. WHERE MORE THAN

ONE DOOR OCCURS IN A ROOM, A SUFFIX HAS BEEN ADDED (ie. 100A).

8.

9.

ALL NEW DOORS SHALL ALLOW 12" CLEAR ON PUSH SIDE AND 18" CLEAR ON PULL SIDE OF

DOOR, UNLESS NOTED OTHERWISE, TO MEET CURRENT ADA CODE REGULATIONS.

10.

11.

12.

SEE CONSTRUCTION PLAN LEGEND FOR WALL CONSTRUCTION AND WALL TYPES. ALL WALLSARE TO BE W3 UNLESS NOTED OTHERWISE. WALLS AT COLUMN WRAPS TO BE W1 UNLESSNOTED OTHERWISE.

2.

ALL NEW DOORS TO BE INSTALLED WITH HINGE 6" AWAY FROM WALL UNLESS NOTEDOTHERWISE.

ALL NEW FIRE EXTINGUISHER CABINETS TO BE FINISHED TO MATCH ADJACENT WALL FINISH

AND INSTALLED ACCORDING TO CODE. LIFESAFETY CONTRACTOR TO VERIFY PLACEMENT AND

COUNT OF FIRE EXTINGUISHERS THROUGHOUT THE SPACE. IF ADDITIONAL FIRE

EXTINGUISHER LOCATIONS ARE NEEDED, A PLAN MUST BE SUBMITTED TO THE ARCHITECT

FOR REVIEW FOR AESTHETIC PURPOSES ONLY.

ALL PENETRATIONS IN RATED WALL PARTITIONS AND FLOOR SYSTEMS SHALL BE FIRE RATED

ASSEMBLIES. SUBMIT PRODUCT DATA AND ASSEMBLY DRAWINGS WITH TEST FILE NUMBERS

FOR REVIEW.

USE MOISTURE-MOLD RESISTANT GYPSUM WALLBOARD MEETING ASTM D3273 ON ALL WALLS

IN RESTROOMS.

INSULATION FOR INTERIOR WALL APPLICATIONS SHALL BE FORMALDEHYDE-FREE, UNFACED,

GLASS-FIBER BLANKET INSULATION IN BATT FORM CONFORMING TO ASTM C 665, TYPE I, WITH

THICKNESS TO BE EQUAL OR GREATER THAN THE STUD THICKNESS OF THE WALL INTO WHICH

IS IT INSTALLED.

NEW SEMI RECESSED FIRE EXTINGUISHER CABINET TO BE INSTALLED IN WALL AT THESE

LOCATIONS WITH TOP OF CABINET AT 54" AFF. PAINT TO MATCH ADJACENT WALL SURFACE.

CONFIRM QUANTITY OF EXTINGUISHERS WITH FIRE DEPARTMENT. IF EXTINGUISHERS NEED

TO BE ADDED VERIFY LOCATIONS WITH THE ARCHITECT.

FP13

PROVIDE & INSTALL FLOOR DRAIN WITH STRAINER. COORDINATE WITH MEP CONSULTANTS.

PROVIDE & INSTALL COMMERCIAL WATER HEATER FOR (2) RESTROOMS AND THE BAR SINK.

PROVIDE BUILT-IN STAINED WOOD RECEPTION DESK WITH FROSTED GLASS TRANSACTION

TOP ON STAND-OFFS, PLASTIC LAMINATE WORK SURFACE, AND TWO (2) PEDESTAL STORAGE

UNITS. SEE DETAILS 1/A4.3.

FP19

FP18

FP14

FP15

FP16

FP17

FP20

FP21

FP22

PROVIDE ONE LAYER OF DRYWALL AT EXISTING STOREFRONT LOCATIONS.

REPAIR AND PATCH ALL FIRE PROOFING ON THE BUILDING SHELL THAT WAS REMOVED DURING

CONSTRUCTION. REMOVE FIREPROOFING SPRAY FROM THE DECK AND OTHER ITEMS THAT DO

NOT REQUIRE FIRE PROOFING.

PROVIDE 42" UPPER CABINETS TO BE: SMART, SHEFFIELD, MAPLE COFFEE. PULLS TO BE

MOCKETT, DP55E-SSS. SEE ELEVATION 1/A4.1.

EXISTING WALLS TO BE LEFT UNFINISHED.

ALL NEW WORKSURFACES TO RECEIVE 3" GROMMETS. NEW GROMMET LOCATIONS TO BE

VERIFIED WITH TENANT IN THE FIELD AND WITH RESPECT TO NEW ELECTRICAL LAYOUT.

GROMMET COLOR TO BE BLACK.

ALIGN WALL WITH WINDOW MULLION AS PER BUILDING STANDARD DETAILS. SEE DETAIL 8/A4.1.

PROVIDE CHROME COAT ROD AND PAINTED WOOD SHELF. SEE DETAIL 7/A4.1.

PROVIDE WATER METER TO MONITOR WATER SUPPLY.

PROVIDE BLOCKING FOR INSTALLATION OF WOOD BASE.

PROVIDE BLOCKING FOR INSTALLATION OF CROWN MOULDING.

MICROWAVE PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE POWER SOURCE FOR

MICROWAVE. VERIFY ELECTRICAL REQUIREMENTS WITH MANUFACTURER'S MANUAL.

COFFEE MAKER PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE WATER & POWER

SOURCE FOR COFFEE MAKER. VERIFY REQUIREMENTS WITH MANUFACTURER'S MANUAL.

COPIER PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE POWER SOURCE FOR

COPIER. VERIFY ELECTRICAL REQUIREMENTS WITH MANUFACTURER'S MANUAL.

PROVIDE 36" UPPER CABINETS, MICROWAVE CABINET, AND BASE CABINETS TO BE: SMART,

SHEFFIELD, MAPLE COFFEE. PLASTIC LAMINATE COUNTER WITH 1-1/2" LIP AND 4" BACK

SPLASH. PULLS TO BE MOCKETT, DP55B-SSS. INCLUDE PLUMBING FOR BAR SINK TO BE:

STERLING, MIDDLETON 14631-3-NA W/ KOHLER, CORALAIS K-15160-CP. SEE ELEVATION 2/A4.1.

PROVIDE PLYWOOD BLOCKING FOR TENANT PROVIDED AND INSTALLED TV.

PROVIDE EXPANSION JOINT COVERS TO BE: C/S GROUP, FWF-200 AND FWFC-200 WALL

EXPANSION JOINT COVERS OR EQUAL. SEE SHEET A3.1 FOR DETAILS.

PROVIDE EXTERIOR SIGNAGE. SEE DETAILS ON SHEET A4.4.

FP23 WALL TO BE 1-HOUR FIRE RATED. PROVIDE FLUSH ACCESS PANEL AS REQUIRED FOR ICE MELT

SENSOR.

FP24 PROVIDE MANUAL ROLLER SHADES TO BE: SHEER WEAVE, STYLE 2000, Q10 BRONZE. VERIFY

MOUNTING CONDITION IN THE FIELD. CONTACT BILL SWHEAR, 317-335-3100.

FP25 NEW WALL TO COVER CHANGE IN EXISTING FOUNDATION HEIGHT.

FP26 RELOCATE SOLENOID CONTROL TO ACCESSIBLE AREA ABOVE CEILING.

FP27 RELOCATE CONDENSATE DRAIN PIPES TO RUN WITHIN ADJACENT COLUMN WRAP.

FP28 PROVIDE FLUSH ACCESS PANEL AS REQUIRED AT OPEN DRAIN.

FP29 RELOCATE PIPE HEATER CONTROLLER ABOVE ACCESSIBLE CEILING.

FP30 PROVIDE (1) LAYER OF PLYWOOD BEHIND DRYWALL FROM FLOOR TO CEILING FOR TENANT

PROVIDED FULL LENGTH TV SCREEN.

FP31 REMOVE HANDLES FROM EXTERIOR SIDE OF DOORS AND SAVE FOR REUSE. CAP AS NEEDED.

WALLS TO EXTEND TO 6" ABOVE FINISHED CEILING.

WITH 5/8" GYPSUM WALL BOARD ONE SIDE.W1 7/8" METAL FURRING

EXISTING PARTITION TO REMAIN

NEW WALL PARTITION

NEW LOW WALL PARTITION

WALL LEGEND:NOTES:

40

0 NEW DOOR AND FRAME. REFER TO DOOR SCHEDULE.

DENOTES NEW MILLWORK.

DENOTES AREA NOT IN CONTRACT.

3-5/8" 25 GAUGE METAL STUDS @16"O.C.

4-7/

8"4-

1/4"

4-7/

8"

WALLS TO EXTEND TO 6" ABOVE FINISHED CEILING.

W3

WITH 5/8" GYPSUM WALL BOARD ONE SIDE.W2 3-5/8" 20 GAUGE METAL STUDS @16" O.C.

PROVIDE 3-5/8" INSULATION INSIDE WALL.

WALLS TO EXTEND TO STRUCTURAL DECK ABOVE.

WITH 5/8" GYPSUM WALL BOARD EACH SIDE.

WALLS TO EXTEND TO 6" ABOVE FINISHED CEILING.

3-5/8" 20 GAUGE METAL STUDS @16"O.C.

WITH 5/8" GYPSUM WALL BOARD EACH SIDE.

W5

EXISTING DOOR AND FRAME. SEE BUILDING SHELL PLAN.

W4

1-1/

2" EXISTING WALL

3-5/8" 20 GAUGE METAL STUDS @16"O.C.

4-7/

8"

WALLS TO EXTEND TO STRUCTURAL DECK ABOVE.

WITH 5/8" GYPSUM WALL BOARD EACH SIDE.W6

2-1/

8"

WALLS TO EXTEND TO THE STRUCTURAL DECK.

WITH 5/8" GYPSUM WALL BOARD ONE SIDE.

1 1/2" 20 GAUGE METAL STUDS @16" O.C.

F

UPUP

1

A4.2

1

A4.3

1'-8" 8'-3 1/8" 16'-11 5/8" 10'-5 3/8" 10'-1 1/4" 3 5/8" 10'-1 1/4" 12'-1 1/4"

1'-1" 8'-1 1/4" 3 5/8" 7'-11 3/4"

6'-9/1

6"

6'-9 3

/4"

11'-3 1

5/1

6"

20'-10 1

1/1

6"

25'-5 1

/16"

2'-1 1

/4"

12'-4 1/4" 12'-4 3/16" 12'-4 3/16" 18'-4 5/8"

9'-4 1/4" 15'-5 3/4" 15'-5 3/4" 12'-1 1/2"

13'-5/8

"5'-2 3

/8"

12'-7 1

/4"

11'-10 9

/16"

14'-1 1

/4"

2'-4 3/4"

1'

2'-4 3/4"

2'-3/4

"8'-9 1

3/1

6"

1'

1'

3'-11"

9'-9 7

/16"

1

A4.1

2

A4.1

FP4

FP2 FP1

FP17

FP1

FP1

FP4

FP4

FP9

FP12 FP12

FP13

FP14

FP15

FP16

FP21

FP21

FP21

FP21 FP22

FP22

FP10

FP11

FP17 FP17

FP30

FP14

FP17

FP17

FP17

FP19

FP19 FP19 FP19 FP19 FP19

FP19

FP20

FP3

FP1

FP1

FP23

FP21

FP17

FP17

FP1

FP18

FP24

FP17

FP4

FP24

FP17

FP17

FP21

FP21

FP21

FP7

FP6 FP5

FP8

FP1

FP26

FP25 FP25

FP29

FP25

FP25

FP28

FP27

FP31

106

111

110

109

112

113

115

116

117

114

114A

113A

103

104

102

101

IT/

STORAGE

106

REST

ROOM

110

MECH

111

CASUAL MTG

105

REST

ROOM

109

RECEPTION

100

HALL

108

W1

W2

W2

W2

W2

W5

W2

W2

W2

W2 W2

W2

W2 W2

W6

W6

W2

W2

W2

W2

W5

W2

W2

W2

COPY

119LARGE

OFFICE 1

113

LARGE

OFFICE 2

112

CLO.

CONFERENCE

114

LARGE

OFFICE 5

117

LARGE

OFFICE 4

116

HALL

118

BREAK

AREA

120

LARGE

OFFICE 3

115

OFFICE 2

103

OFFICE 3

104

OFFICE 1

102

CLO.

101

W6

OPEN OFFICE

107

W4

W2

W2

W2

W2

W5

W5

W1

W1

W1

20

18

19

Q R R.5Q.5

HARDWARE

L =

LO

CK

SE

T

7'-0"

7'-0"

7'-0"

OFFICE

103

104

106

3'-0"

3'-0"

3'-0"

1 3/4"

1 3/4"

1 3/4"

WD/GL

WD/GL

WOOD

HM

HM

HM

7'-0"

SIZE

OFFICE

RO

OM

NA

ME

OP

EN

ING

NU

MB

ER

102

WID

TH

HE

IGH

T

ELE

VAT

ION

MAT

ER

IAL

1 3/4"

TH

ICK

DOOR

MAT

ER

IAL

ELE

VAT

ION

HM

FRAME

L,S

L,S

REMARKS

D O O R S C H E D U L E

PR,S,CLHMWOOD1 3/4"3'-0" 7'-0"

7'-0"3'-0" 1 3/4" WOOD HM PR,S,CL

7'-0"3'-0" 1 3/4" WOOD HM PS,S

7'-0"3'-0" 1 3/4" WD/GL HM L,S

7'-0"3'-0" 1 3/4" WD/GL HM PS,S

7'-0"3'-0" 1 3/4" WOOD HM PS,S

109

110

111

112

114

114A

OFFICE

IT/STORAGE

RESTROOM

RESTROOM

MECHANICAL

OFFICE

CONFERENCE

CONFERENCE

3'-0" WD/GL

D1

D2

D2

D1

D1

D1

D1

D2

D2

D2

D1

D2

D2

D1

D1

D1

D1

D2

D2

D2

S =

ST

OP

PS

= P

AS

SA

GE

SE

T

CL

= C

LOS

ER

L,S

L,S

PR

= P

RIV

AC

Y S

ET

HINGE STOP

7'-0"3'-0" 1 3/4" WOOD HM PS,S113A CLOSET D1 D1 FLOOR STOP

7'-0"CLOSET101 1 3/4" HM(2)2'-6" WOOD D3 D3 DM,RC,S

7'-0"3'-0" 1 3/4" WD/GL HM L,S113 OFFICE D2 D2

7'-0"3'-0" 1 3/4" WD/GL HM L,S

7'-0"3'-0" 1 3/4" WD/GL HM L,S

115

116

OFFICE

OFFICE D2

D2

D2

D2

7'-0"3'-0" 1 3/4" WD/GL HM L,S117 OFFICE D2 D2

HINGE STOPS

DM

= D

UM

MY

SE

TR

C =

RO

LLE

R C

ATC

H

1.

DOOR SCHEDULE NOTES:

2.

5.

ALL HOLLOW METAL DOOR FRAMES TO PAINTED P2.

CONTRACTOR TO VERIFY DOOR HEIGHT PRIOR TO CONSTRUCTION.

COORDINATE KEYING LOCKSETS WITH TENANT.

ALL DOORS TO BE PAINTED P2 UNLESS NOTED OTHERWISE.

4.

6.

7.

HARDWARE TO BE SCHLAGE, AL SERIES, JUPITER STYLE, 626 FINISH LEVER HARDWARE.

3. ALL EXISTING HOLLOW METAL DOORS AND DOOR FRAMES TO BE PAINTED TO MATCHADJACENT WALL FINISH UNLESS NOTED OTHERWISE.

CLOSERS TO HAVE HOLD OPEN OPTION.

7'-0"

2"

3'-0"2" 2"

7'-0"

2"

3'-0" 2"2" 2'-0"2"

7'-0"

2"

5'-0" 2"2"

D1 D2

HARDWARE TO BE SCHLAGE, AL SERIES, JUPITER STYLE, 626 FINISH LEVER HARDWARE.

D3

SCALE: 1/4" = 1'-0"

1 Construction PlanA1.2