GENERAL CONSTRUCTION NOTES: CONSTRUCTION PLAN …...fp21 fp22 provide one layer of drywall at...
1
Project Number: Revisions: Drawn By Checked By Issue Date Architecture / Project Managment: Sheet Number: Carmel, Indiana 46032 317.705.7980 (fax) 355 City Center Drive 317.705.7979 (phone) Architect: Sheet Title: Project: Developer: By: WESTBRIDGE INVESTMENTS Carmel City Center - Suite 68 742 S. Rangeline Road, Carmel IN 46032 COPYRIGHT & OWNERSHIP OF DOCUMENTS State Release Set: 5.03.2013 N 19 R @ 6 25/32" = 10'-8 3/4" 18 T @ 11 29/64" = 17'-2 3/64" UP SCALE: 1/128"= 1'-0" KEY PLAN SUITE 68 PEDCOR DESIGN GROUP A1.2 CONSTRUCTION PLAN AJR MC 5/03/2013 THIS DOCUMENT IS AN INSTRUMENT OF SERVICES AND IS THE SOLE PROPERTY OF THE ARCHITECT AND PEDCOR DESIGN GROUP, LLC. ALL INFORMATION CONTAINED HEREIN IS CONFIDENTIAL. ITS SUBMISSION AND DISTRIBUTION TO OTHER PARTIES IS NOT TO BE CONSTRUED AS PUBLICATION IN DEROGATION OF COMMON LAW COPYRIGHT, INTELLECTUAL PROPERTY RIGHTS OR OTHER RESERVED RIGHTS. ALL INFORMATION CONTAINED HEREIN CONSTITUTES THE ORIGINAL AND UNPUBLISHED WORK OF THE ARCHITECT, JAMES R. STUTZMAN, AND PEDCOR DESIGN GROUP, LLC. NO PART OR WHOLE OF THIS DESIGN, THESE DRAWINGS, OR THE RESULTING BUILDING OR BUILDINGS, OR PORTIONS OF THE RESULTING BUILDING OR BUILDINGS MAY BE DUPLICATED, COPIED, EXHIBITED, PHOTOGRAPHED, PUBLISHED, MODIFIED OR OTHERWISE DISTRIBUTED IN ANY WAY WITHOUT THE SPECIFIC AND PRIOR WRITTEN CONSENT OF THE ARCHITECT, JAMES R. STUTZMAN AND PEDCOR DESIGN GROUP, LLC. © COPYRIGHT 2013 JAMES R. STUTZMAN, AIA, Carmel, Indiana. RADIUS ALL OUTSIDE CORNERS OF COUNTER TOPS. SIZE OF RADIUS TO BE VERIFIED WITH ARCHITECT. 13. APPLY SEALANT AT ALL PLUMBING FIXTURES, AT JUNCTURE WITH WALL AND AT ALL COUNTERTOPS AND BACKSPLASH JUNCTURES. 14. 15. FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SCHEDULED. 16. ALL WALLS SCHEDULED TO REMAIN (I.E. CORE WALLS, AND DEMISING WALLS) SHALL BE PATCHED, REPAIRED, AND SANDED SMOOTH IN PREPARATION FOR NEW FINISHES. 17. REFRIGERATOR PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE WATER & POWER SOURCE FOR REFRIGERATOR. VERIFY REQUIREMENTS WITH MANUFACTURER'S MANUAL. PROVIDE 3/4"x4'x4' FIRE RETARDANT PLYWOOD PHONE BOARD MOUNTED AT 60" A.F.F. PHONE BOARD TO BE PAINTED WITH FIRE RETARDANT PAINT, COLOR OF PAINT TO MATCH ADJACENT WALL FINISH. ALIGN FINISHED FACES. FP12 FP11 FP10 FP9 FP8 CONSTRUCTION PLAN NOTES: FP1 FP2 FP3 FP4 FP5 FP6 FP7 GENERAL CONSTRUCTION NOTES: DIMENSIONS ARE FROM STUD TO STUD UNLESS NOTED OR SHOWN OTHERWISE. ANY DIMENSION NOT SHOWN OR DEEMED QUESTIONABLE ARE TO BE VERIFIED BY ARCHITECT. DO NOT SCALE DRAWINGS. 1. ALL WALLS SHALL BE CHALKED OFF FOR ARCHITECT'S REVIEW OF NEW WALL CONSTRUCTION. 3. 4. 5. PROVIDE CONCEALED FIRE RATED WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS. 6. 7. NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS. WHERE MORE THAN ONE DOOR OCCURS IN A ROOM, A SUFFIX HAS BEEN ADDED (ie. 100A). 8. 9. ALL NEW DOORS SHALL ALLOW 12" CLEAR ON PUSH SIDE AND 18" CLEAR ON PULL SIDE OF DOOR, UNLESS NOTED OTHERWISE, TO MEET CURRENT ADA CODE REGULATIONS. 10. 11. 12. SEE CONSTRUCTION PLAN LEGEND FOR WALL CONSTRUCTION AND WALL TYPES. ALL WALLS ARE TO BE W3 UNLESS NOTED OTHERWISE. WALLS AT COLUMN WRAPS TO BE W1 UNLESS NOTED OTHERWISE. 2. ALL NEW DOORS TO BE INSTALLED WITH HINGE 6" AWAY FROM WALL UNLESS NOTED OTHERWISE. ALL NEW FIRE EXTINGUISHER CABINETS TO BE FINISHED TO MATCH ADJACENT WALL FINISH AND INSTALLED ACCORDING TO CODE. LIFESAFETY CONTRACTOR TO VERIFY PLACEMENT AND COUNT OF FIRE EXTINGUISHERS THROUGHOUT THE SPACE. IF ADDITIONAL FIRE EXTINGUISHER LOCATIONS ARE NEEDED, A PLAN MUST BE SUBMITTED TO THE ARCHITECT FOR REVIEW FOR AESTHETIC PURPOSES ONLY. ALL PENETRATIONS IN RATED WALL PARTITIONS AND FLOOR SYSTEMS SHALL BE FIRE RATED ASSEMBLIES. SUBMIT PRODUCT DATA AND ASSEMBLY DRAWINGS WITH TEST FILE NUMBERS FOR REVIEW. USE MOISTURE-MOLD RESISTANT GYPSUM WALLBOARD MEETING ASTM D3273 ON ALL WALLS IN RESTROOMS. INSULATION FOR INTERIOR WALL APPLICATIONS SHALL BE FORMALDEHYDE-FREE, UNFACED, GLASS-FIBER BLANKET INSULATION IN BATT FORM CONFORMING TO ASTM C 665, TYPE I, WITH THICKNESS TO BE EQUAL OR GREATER THAN THE STUD THICKNESS OF THE WALL INTO WHICH IS IT INSTALLED. NEW SEMI RECESSED FIRE EXTINGUISHER CABINET TO BE INSTALLED IN WALL AT THESE LOCATIONS WITH TOP OF CABINET AT 54" AFF. PAINT TO MATCH ADJACENT WALL SURFACE. CONFIRM QUANTITY OF EXTINGUISHERS WITH FIRE DEPARTMENT. IF EXTINGUISHERS NEED TO BE ADDED VERIFY LOCATIONS WITH THE ARCHITECT. FP13 PROVIDE & INSTALL FLOOR DRAIN WITH STRAINER. COORDINATE WITH MEP CONSULTANTS. PROVIDE & INSTALL COMMERCIAL WATER HEATER FOR (2) RESTROOMS AND THE BAR SINK. PROVIDE BUILT-IN STAINED WOOD RECEPTION DESK WITH FROSTED GLASS TRANSACTION TOP ON STAND-OFFS, PLASTIC LAMINATE WORK SURFACE, AND TWO (2) PEDESTAL STORAGE UNITS. SEE DETAILS 1/A4.3. FP19 FP18 FP14 FP15 FP16 FP17 FP20 FP21 FP22 PROVIDE ONE LAYER OF DRYWALL AT EXISTING STOREFRONT LOCATIONS. REPAIR AND PATCH ALL FIRE PROOFING ON THE BUILDING SHELL THAT WAS REMOVED DURING CONSTRUCTION. REMOVE FIREPROOFING SPRAY FROM THE DECK AND OTHER ITEMS THAT DO NOT REQUIRE FIRE PROOFING. PROVIDE 42" UPPER CABINETS TO BE: SMART, SHEFFIELD, MAPLE COFFEE. PULLS TO BE MOCKETT, DP55E-SSS. SEE ELEVATION 1/A4.1. EXISTING WALLS TO BE LEFT UNFINISHED. ALL NEW WORKSURFACES TO RECEIVE 3" GROMMETS. NEW GROMMET LOCATIONS TO BE VERIFIED WITH TENANT IN THE FIELD AND WITH RESPECT TO NEW ELECTRICAL LAYOUT. GROMMET COLOR TO BE BLACK. ALIGN WALL WITH WINDOW MULLION AS PER BUILDING STANDARD DETAILS. SEE DETAIL 8/A4.1. PROVIDE CHROME COAT ROD AND PAINTED WOOD SHELF. SEE DETAIL 7/A4.1. PROVIDE WATER METER TO MONITOR WATER SUPPLY. PROVIDE BLOCKING FOR INSTALLATION OF WOOD BASE. PROVIDE BLOCKING FOR INSTALLATION OF CROWN MOULDING. MICROWAVE PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE POWER SOURCE FOR MICROWAVE. VERIFY ELECTRICAL REQUIREMENTS WITH MANUFACTURER'S MANUAL. COFFEE MAKER PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE WATER & POWER SOURCE FOR COFFEE MAKER. VERIFY REQUIREMENTS WITH MANUFACTURER'S MANUAL. COPIER PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE POWER SOURCE FOR COPIER. VERIFY ELECTRICAL REQUIREMENTS WITH MANUFACTURER'S MANUAL. PROVIDE 36" UPPER CABINETS, MICROWAVE CABINET, AND BASE CABINETS TO BE: SMART, SHEFFIELD, MAPLE COFFEE. PLASTIC LAMINATE COUNTER WITH 1-1/2" LIP AND 4" BACK SPLASH. PULLS TO BE MOCKETT, DP55B-SSS. INCLUDE PLUMBING FOR BAR SINK TO BE: STERLING, MIDDLETON 14631-3-NA W/ KOHLER, CORALAIS K-15160-CP. SEE ELEVATION 2/A4.1. PROVIDE PLYWOOD BLOCKING FOR TENANT PROVIDED AND INSTALLED TV. PROVIDE EXPANSION JOINT COVERS TO BE: C/S GROUP, FWF-200 AND FWFC-200 WALL EXPANSION JOINT COVERS OR EQUAL. SEE SHEET A3.1 FOR DETAILS. PROVIDE EXTERIOR SIGNAGE. SEE DETAILS ON SHEET A4.4. FP23 WALL TO BE 1-HOUR FIRE RATED. PROVIDE FLUSH ACCESS PANEL AS REQUIRED FOR ICE MELT SENSOR. FP24 PROVIDE MANUAL ROLLER SHADES TO BE: SHEER WEAVE, STYLE 2000, Q10 BRONZE. VERIFY MOUNTING CONDITION IN THE FIELD. CONTACT BILL SWHEAR, 317-335-3100. FP25 NEW WALL TO COVER CHANGE IN EXISTING FOUNDATION HEIGHT. FP26 RELOCATE SOLENOID CONTROL TO ACCESSIBLE AREA ABOVE CEILING. FP27 RELOCATE CONDENSATE DRAIN PIPES TO RUN WITHIN ADJACENT COLUMN WRAP. FP28 PROVIDE FLUSH ACCESS PANEL AS REQUIRED AT OPEN DRAIN. FP29 RELOCATE PIPE HEATER CONTROLLER ABOVE ACCESSIBLE CEILING. FP30 PROVIDE (1) LAYER OF PLYWOOD BEHIND DRYWALL FROM FLOOR TO CEILING FOR TENANT PROVIDED FULL LENGTH TV SCREEN. FP31 REMOVE HANDLES FROM EXTERIOR SIDE OF DOORS AND SAVE FOR REUSE. CAP AS NEEDED. WALLS TO EXTEND TO 6" ABOVE FINISHED CEILING. WITH 5/8" GYPSUM WALL BOARD ONE SIDE. W1 7/8" METAL FURRING EXISTING PARTITION TO REMAIN NEW WALL PARTITION NEW LOW WALL PARTITION WALL LEGEND: NOTES: 400 NEW DOOR AND FRAME. REFER TO DOOR SCHEDULE. DENOTES NEW MILLWORK. DENOTES AREA NOT IN CONTRACT. 3-5/8" 25 GAUGE METAL STUDS @16"O.C. 4-7/8" 4-1/4" 4-7/8" WALLS TO EXTEND TO 6" ABOVE FINISHED CEILING. W3 WITH 5/8" GYPSUM WALL BOARD ONE SIDE. W2 3-5/8" 20 GAUGE METAL STUDS @16" O.C. PROVIDE 3-5/8" INSULATION INSIDE WALL. WALLS TO EXTEND TO STRUCTURAL DECK ABOVE. WITH 5/8" GYPSUM WALL BOARD EACH SIDE. WALLS TO EXTEND TO 6" ABOVE FINISHED CEILING. 3-5/8" 20 GAUGE METAL STUDS @16"O.C. WITH 5/8" GYPSUM WALL BOARD EACH SIDE. W5 EXISTING DOOR AND FRAME. SEE BUILDING SHELL PLAN. W4 1-1/2" EXISTING WALL 3-5/8" 20 GAUGE METAL STUDS @16"O.C. 4-7/8" WALLS TO EXTEND TO STRUCTURAL DECK ABOVE. WITH 5/8" GYPSUM WALL BOARD EACH SIDE. W6 2-1/8" WALLS TO EXTEND TO THE STRUCTURAL DECK. WITH 5/8" GYPSUM WALL BOARD ONE SIDE. 1 1/2" 20 GAUGE METAL STUDS @16" O.C. F UP UP 1 A4.2 1 A4.3 1'-8" 8'-3 1/8" 16'-11 5/8" 10'-5 3/8" 10'-1 1/4" 3 5/8" 10'-1 1/4" 12'-1 1/4" 1'-1" 8'-1 1/4" 3 5/8" 7'-11 3/4" 6'-9/16" 6'-9 3/4" 11'-3 15/16" 20'-10 11/16" 25'-5 1/16" 2'-1 1/4" 12'-4 1/4" 12'-4 3/16" 12'-4 3/16" 18'-4 5/8" 9'-4 1/4" 15'-5 3/4" 15'-5 3/4" 12'-1 1/2" 13'-5/8" 5'-2 3/8" 12'-7 1/4" 11'-10 9/16" 14'-1 1/4" 2'-4 3/4" 1' 2'-4 3/4" 2'-3/4" 8'-9 13/16" 1' 1' 3'-11" 9'-9 7/16" 1 A4.1 2 A4.1 FP4 FP2 FP1 FP17 FP1 FP1 FP4 FP4 FP9 FP12 FP12 FP13 FP14 FP15 FP16 FP21 FP21 FP21 FP21 FP22 FP22 FP10 FP11 FP17 FP17 FP30 FP14 FP17 FP17 FP17 FP19 FP19 FP19 FP19 FP19 FP19 FP19 FP20 FP3 FP1 FP1 FP23 FP21 FP17 FP17 FP1 FP18 FP24 FP17 FP4 FP24 FP17 FP17 FP21 FP21 FP21 FP7 FP6 FP5 FP8 FP1 FP26 FP25 FP25 FP29 FP25 FP25 FP28 FP27 FP31 106 111 110 109 112 113 115 116 117 114 114A 113A 103 104 102 101 IT/ STORAGE 106 REST ROOM 110 MECH 111 CASUAL MTG 105 REST ROOM 109 RECEPTION 100 HALL 108 W1 W2 W2 W2 W2 W5 W2 W2 W2 W2 W2 W2 W2 W2 W6 W6 W2 W2 W2 W2 W5 W2 W2 W2 COPY 119 LARGE OFFICE 1 113 LARGE OFFICE 2 112 CLO. CONFERENCE 114 LARGE OFFICE 5 117 LARGE OFFICE 4 116 HALL 118 BREAK AREA 120 LARGE OFFICE 3 115 OFFICE 2 103 OFFICE 3 104 OFFICE 1 102 CLO. 101 W6 OPEN OFFICE 107 W4 W2 W2 W2 W2 W5 W5 W1 W1 W1 20 18 19 Q R R.5 Q.5 HARDWARE L = LOCKSET 7'-0" 7'-0" 7'-0" OFFICE 103 104 106 3'-0" 3'-0" 3'-0" 1 3/4" 1 3/4" 1 3/4" WD/GL WD/GL WOOD HM HM HM 7'-0" SIZE OFFICE ROOM NAME OPENING NUMBER 102 WIDTH HEIGHT ELEVATION MATERIAL 1 3/4" THICK DOOR MATERIAL ELEVATION HM FRAME L,S L,S REMARKS D O O R S C H E D U L E PR,S,CL HM WOOD 1 3/4" 3'-0" 7'-0" 7'-0" 3'-0" 1 3/4" WOOD HM PR,S,CL 7'-0" 3'-0" 1 3/4" WOOD HM PS,S 7'-0" 3'-0" 1 3/4" WD/GL HM L,S 7'-0" 3'-0" 1 3/4" WD/GL HM PS,S 7'-0" 3'-0" 1 3/4" WOOD HM PS,S 109 110 111 112 114 114A OFFICE IT/STORAGE RESTROOM RESTROOM MECHANICAL OFFICE CONFERENCE CONFERENCE 3'-0" WD/GL D1 D2 D2 D1 D1 D1 D1 D2 D2 D2 D1 D2 D2 D1 D1 D1 D1 D2 D2 D2 S = STOP PS = PASSAGE SET CL = CLOSER L,S L,S PR = PRIVACY SET HINGE STOP 7'-0" 3'-0" 1 3/4" WOOD HM PS,S 113A CLOSET D1 D1 FLOOR STOP 7'-0" CLOSET 101 1 3/4" HM (2)2'-6" WOOD D3 D3 DM,RC,S 7'-0" 3'-0" 1 3/4" WD/GL HM L,S 113 OFFICE D2 D2 7'-0" 3'-0" 1 3/4" WD/GL HM L,S 7'-0" 3'-0" 1 3/4" WD/GL HM L,S 115 116 OFFICE OFFICE D2 D2 D2 D2 7'-0" 3'-0" 1 3/4" WD/GL HM L,S 117 OFFICE D2 D2 HINGE STOPS DM = DUMMY SET RC = ROLLER CATCH 1. DOOR SCHEDULE NOTES: 2. 5. ALL HOLLOW METAL DOOR FRAMES TO PAINTED P2. CONTRACTOR TO VERIFY DOOR HEIGHT PRIOR TO CONSTRUCTION. COORDINATE KEYING LOCKSETS WITH TENANT. ALL DOORS TO BE PAINTED P2 UNLESS NOTED OTHERWISE. 4. 6. 7. HARDWARE TO BE SCHLAGE, AL SERIES, JUPITER STYLE, 626 FINISH LEVER HARDWARE. 3. ALL EXISTING HOLLOW METAL DOORS AND DOOR FRAMES TO BE PAINTED TO MATCH ADJACENT WALL FINISH UNLESS NOTED OTHERWISE. CLOSERS TO HAVE HOLD OPEN OPTION. 7'-0" 2" 3'-0" 2" 2" 7'-0" 2" 3'-0" 2" 2" 2'-0" 2" 7'-0" 2" 5'-0" 2" 2" D1 D2 D3 SCALE: 1/4" = 1'-0" 1 Construction Plan A1.2
Transcript of GENERAL CONSTRUCTION NOTES: CONSTRUCTION PLAN …...fp21 fp22 provide one layer of drywall at...
Project Number:
Revisions:
Drawn By Checked ByIssue Date
Architecture / Project Managment:
Sheet Number:
Carmel, Indiana 46032
317.705.7980 (fax)
355 City Center Drive
317.705.7979 (phone)
Architect:
Sheet Title:
Project:
Developer:
By:
WE
ST
BR
IDG
E IN
VE
ST
ME
NT
S
Ca
rme
l C
ity C
ente
r -
Su
ite 6
8742 S
. R
angelin
e R
oad, C
arm
el IN
46032
COPYRIGHT & OWNERSHIP OF DOCUMENTS
State Release Set: 5.03.2013
N
19
R @
6 2
5/3
2"
= 1
0'-8
3/4
"
18
T @
11
29
/64
" =
17
'-2
3/6
4"
UP
SCALE: 1/128"= 1'-0"
KEY PLAN
SUITE 68
PEDCOR DESIGN GROUP
A1.2
CONSTRUCTION
PLAN
AJR MC5/03/2013
THIS DOCUMENT IS AN INSTRUMENT OF SERVICES AND IS THE SOLE
PROPERTY OF THE ARCHITECT AND PEDCOR DESIGN GROUP, LLC. ALL
INFORMATION CONTAINED HEREIN IS CONFIDENTIAL. ITS SUBMISSION
AND DISTRIBUTION TO OTHER PARTIES IS NOT TO BE CONSTRUED AS
PUBLICATION IN DEROGATION OF COMMON LAW COPYRIGHT,
INTELLECTUAL PROPERTY RIGHTS OR OTHER RESERVED RIGHTS. ALL
INFORMATION CONTAINED HEREIN CONSTITUTES THE ORIGINAL AND
UNPUBLISHED WORK OF THE ARCHITECT, JAMES R. STUTZMAN, AND
PEDCOR DESIGN GROUP, LLC. NO PART OR WHOLE OF THIS DESIGN,
THESE DRAWINGS, OR THE RESULTING BUILDING OR BUILDINGS, OR
PORTIONS OF THE RESULTING BUILDING OR BUILDINGS MAY BE
DUPLICATED, COPIED, EXHIBITED, PHOTOGRAPHED, PUBLISHED,
MODIFIED OR OTHERWISE DISTRIBUTED IN ANY WAY WITHOUT THE
SPECIFIC AND PRIOR WRITTEN CONSENT OF THE ARCHITECT, JAMES R.
STUTZMAN AND PEDCOR DESIGN GROUP, LLC. © COPYRIGHT 2013
JAMES R. STUTZMAN, AIA, Carmel, Indiana.
RADIUS ALL OUTSIDE CORNERS OF COUNTER TOPS. SIZE OF RADIUS TO BE VERIFIED WITH
ARCHITECT.
13.
APPLY SEALANT AT ALL PLUMBING FIXTURES, AT JUNCTURE WITH WALL AND AT ALL
COUNTERTOPS AND BACKSPLASH JUNCTURES.
14.
15.
FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES
AS SCHEDULED.
16.
ALL WALLS SCHEDULED TO REMAIN (I.E. CORE WALLS, AND DEMISING WALLS) SHALL BE
PATCHED, REPAIRED, AND SANDED SMOOTH IN PREPARATION FOR NEW FINISHES.
17.
REFRIGERATOR PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE WATER & POWER
SOURCE FOR REFRIGERATOR. VERIFY REQUIREMENTS WITH MANUFACTURER'S MANUAL.
PROVIDE 3/4"x4'x4' FIRE RETARDANT PLYWOOD PHONE BOARD MOUNTED AT 60" A.F.F. PHONE
BOARD TO BE PAINTED WITH FIRE RETARDANT PAINT, COLOR OF PAINT TO MATCH ADJACENT
WALL FINISH.
ALIGN FINISHED FACES.
FP12
FP11
FP10
FP9
FP8
CONSTRUCTION PLAN NOTES:
FP1
FP2
FP3
FP4
FP5
FP6
FP7
GENERAL CONSTRUCTION NOTES:
DIMENSIONS ARE FROM STUD TO STUD UNLESS NOTED OR SHOWN OTHERWISE. ANY
DIMENSION NOT SHOWN OR DEEMED QUESTIONABLE ARE TO BE VERIFIED BY ARCHITECT. DO
NOT SCALE DRAWINGS.
1.
ALL WALLS SHALL BE CHALKED OFF FOR ARCHITECT'S REVIEW OF NEW WALL CONSTRUCTION.3.
4.
5.
PROVIDE CONCEALED FIRE RATED WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL
SURFACE MOUNTED ITEMS.
6.
7.
NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS. WHERE MORE THAN
ONE DOOR OCCURS IN A ROOM, A SUFFIX HAS BEEN ADDED (ie. 100A).
8.
9.
ALL NEW DOORS SHALL ALLOW 12" CLEAR ON PUSH SIDE AND 18" CLEAR ON PULL SIDE OF
DOOR, UNLESS NOTED OTHERWISE, TO MEET CURRENT ADA CODE REGULATIONS.
10.
11.
12.
SEE CONSTRUCTION PLAN LEGEND FOR WALL CONSTRUCTION AND WALL TYPES. ALL WALLSARE TO BE W3 UNLESS NOTED OTHERWISE. WALLS AT COLUMN WRAPS TO BE W1 UNLESSNOTED OTHERWISE.
2.
ALL NEW DOORS TO BE INSTALLED WITH HINGE 6" AWAY FROM WALL UNLESS NOTEDOTHERWISE.
ALL NEW FIRE EXTINGUISHER CABINETS TO BE FINISHED TO MATCH ADJACENT WALL FINISH
AND INSTALLED ACCORDING TO CODE. LIFESAFETY CONTRACTOR TO VERIFY PLACEMENT AND
COUNT OF FIRE EXTINGUISHERS THROUGHOUT THE SPACE. IF ADDITIONAL FIRE
EXTINGUISHER LOCATIONS ARE NEEDED, A PLAN MUST BE SUBMITTED TO THE ARCHITECT
FOR REVIEW FOR AESTHETIC PURPOSES ONLY.
ALL PENETRATIONS IN RATED WALL PARTITIONS AND FLOOR SYSTEMS SHALL BE FIRE RATED
ASSEMBLIES. SUBMIT PRODUCT DATA AND ASSEMBLY DRAWINGS WITH TEST FILE NUMBERS
FOR REVIEW.
USE MOISTURE-MOLD RESISTANT GYPSUM WALLBOARD MEETING ASTM D3273 ON ALL WALLS
IN RESTROOMS.
INSULATION FOR INTERIOR WALL APPLICATIONS SHALL BE FORMALDEHYDE-FREE, UNFACED,
GLASS-FIBER BLANKET INSULATION IN BATT FORM CONFORMING TO ASTM C 665, TYPE I, WITH
THICKNESS TO BE EQUAL OR GREATER THAN THE STUD THICKNESS OF THE WALL INTO WHICH
IS IT INSTALLED.
NEW SEMI RECESSED FIRE EXTINGUISHER CABINET TO BE INSTALLED IN WALL AT THESE
LOCATIONS WITH TOP OF CABINET AT 54" AFF. PAINT TO MATCH ADJACENT WALL SURFACE.
CONFIRM QUANTITY OF EXTINGUISHERS WITH FIRE DEPARTMENT. IF EXTINGUISHERS NEED
TO BE ADDED VERIFY LOCATIONS WITH THE ARCHITECT.
FP13
PROVIDE & INSTALL FLOOR DRAIN WITH STRAINER. COORDINATE WITH MEP CONSULTANTS.
PROVIDE & INSTALL COMMERCIAL WATER HEATER FOR (2) RESTROOMS AND THE BAR SINK.
PROVIDE BUILT-IN STAINED WOOD RECEPTION DESK WITH FROSTED GLASS TRANSACTION
TOP ON STAND-OFFS, PLASTIC LAMINATE WORK SURFACE, AND TWO (2) PEDESTAL STORAGE
UNITS. SEE DETAILS 1/A4.3.
FP19
FP18
FP14
FP15
FP16
FP17
FP20
FP21
FP22
PROVIDE ONE LAYER OF DRYWALL AT EXISTING STOREFRONT LOCATIONS.
REPAIR AND PATCH ALL FIRE PROOFING ON THE BUILDING SHELL THAT WAS REMOVED DURING
CONSTRUCTION. REMOVE FIREPROOFING SPRAY FROM THE DECK AND OTHER ITEMS THAT DO
NOT REQUIRE FIRE PROOFING.
PROVIDE 42" UPPER CABINETS TO BE: SMART, SHEFFIELD, MAPLE COFFEE. PULLS TO BE
MOCKETT, DP55E-SSS. SEE ELEVATION 1/A4.1.
EXISTING WALLS TO BE LEFT UNFINISHED.
ALL NEW WORKSURFACES TO RECEIVE 3" GROMMETS. NEW GROMMET LOCATIONS TO BE
VERIFIED WITH TENANT IN THE FIELD AND WITH RESPECT TO NEW ELECTRICAL LAYOUT.
GROMMET COLOR TO BE BLACK.
ALIGN WALL WITH WINDOW MULLION AS PER BUILDING STANDARD DETAILS. SEE DETAIL 8/A4.1.
PROVIDE CHROME COAT ROD AND PAINTED WOOD SHELF. SEE DETAIL 7/A4.1.
PROVIDE WATER METER TO MONITOR WATER SUPPLY.
PROVIDE BLOCKING FOR INSTALLATION OF WOOD BASE.
PROVIDE BLOCKING FOR INSTALLATION OF CROWN MOULDING.
MICROWAVE PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE POWER SOURCE FOR
MICROWAVE. VERIFY ELECTRICAL REQUIREMENTS WITH MANUFACTURER'S MANUAL.
COFFEE MAKER PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE WATER & POWER
SOURCE FOR COFFEE MAKER. VERIFY REQUIREMENTS WITH MANUFACTURER'S MANUAL.
COPIER PROVIDED AND INSTALLED BY TENANT. G.C. TO PROVIDE POWER SOURCE FOR
COPIER. VERIFY ELECTRICAL REQUIREMENTS WITH MANUFACTURER'S MANUAL.
PROVIDE 36" UPPER CABINETS, MICROWAVE CABINET, AND BASE CABINETS TO BE: SMART,
SHEFFIELD, MAPLE COFFEE. PLASTIC LAMINATE COUNTER WITH 1-1/2" LIP AND 4" BACK
SPLASH. PULLS TO BE MOCKETT, DP55B-SSS. INCLUDE PLUMBING FOR BAR SINK TO BE:
STERLING, MIDDLETON 14631-3-NA W/ KOHLER, CORALAIS K-15160-CP. SEE ELEVATION 2/A4.1.
PROVIDE PLYWOOD BLOCKING FOR TENANT PROVIDED AND INSTALLED TV.
PROVIDE EXPANSION JOINT COVERS TO BE: C/S GROUP, FWF-200 AND FWFC-200 WALL
EXPANSION JOINT COVERS OR EQUAL. SEE SHEET A3.1 FOR DETAILS.
PROVIDE EXTERIOR SIGNAGE. SEE DETAILS ON SHEET A4.4.
FP23 WALL TO BE 1-HOUR FIRE RATED. PROVIDE FLUSH ACCESS PANEL AS REQUIRED FOR ICE MELT
SENSOR.
FP24 PROVIDE MANUAL ROLLER SHADES TO BE: SHEER WEAVE, STYLE 2000, Q10 BRONZE. VERIFY
MOUNTING CONDITION IN THE FIELD. CONTACT BILL SWHEAR, 317-335-3100.
FP25 NEW WALL TO COVER CHANGE IN EXISTING FOUNDATION HEIGHT.
FP26 RELOCATE SOLENOID CONTROL TO ACCESSIBLE AREA ABOVE CEILING.
FP27 RELOCATE CONDENSATE DRAIN PIPES TO RUN WITHIN ADJACENT COLUMN WRAP.
FP28 PROVIDE FLUSH ACCESS PANEL AS REQUIRED AT OPEN DRAIN.
FP29 RELOCATE PIPE HEATER CONTROLLER ABOVE ACCESSIBLE CEILING.
FP30 PROVIDE (1) LAYER OF PLYWOOD BEHIND DRYWALL FROM FLOOR TO CEILING FOR TENANT
PROVIDED FULL LENGTH TV SCREEN.
FP31 REMOVE HANDLES FROM EXTERIOR SIDE OF DOORS AND SAVE FOR REUSE. CAP AS NEEDED.
WALLS TO EXTEND TO 6" ABOVE FINISHED CEILING.
WITH 5/8" GYPSUM WALL BOARD ONE SIDE.W1 7/8" METAL FURRING
EXISTING PARTITION TO REMAIN
NEW WALL PARTITION
NEW LOW WALL PARTITION
WALL LEGEND:NOTES:
40
0 NEW DOOR AND FRAME. REFER TO DOOR SCHEDULE.
DENOTES NEW MILLWORK.
DENOTES AREA NOT IN CONTRACT.
3-5/8" 25 GAUGE METAL STUDS @16"O.C.
4-7/
8"4-
1/4"
4-7/
8"
WALLS TO EXTEND TO 6" ABOVE FINISHED CEILING.
W3
WITH 5/8" GYPSUM WALL BOARD ONE SIDE.W2 3-5/8" 20 GAUGE METAL STUDS @16" O.C.
PROVIDE 3-5/8" INSULATION INSIDE WALL.
WALLS TO EXTEND TO STRUCTURAL DECK ABOVE.
WITH 5/8" GYPSUM WALL BOARD EACH SIDE.
WALLS TO EXTEND TO 6" ABOVE FINISHED CEILING.
3-5/8" 20 GAUGE METAL STUDS @16"O.C.
WITH 5/8" GYPSUM WALL BOARD EACH SIDE.
W5
EXISTING DOOR AND FRAME. SEE BUILDING SHELL PLAN.
W4
1-1/
2" EXISTING WALL
3-5/8" 20 GAUGE METAL STUDS @16"O.C.
4-7/
8"
WALLS TO EXTEND TO STRUCTURAL DECK ABOVE.
WITH 5/8" GYPSUM WALL BOARD EACH SIDE.W6
2-1/
8"
WALLS TO EXTEND TO THE STRUCTURAL DECK.
WITH 5/8" GYPSUM WALL BOARD ONE SIDE.
1 1/2" 20 GAUGE METAL STUDS @16" O.C.
F
UPUP
1
A4.2
1
A4.3
1'-8" 8'-3 1/8" 16'-11 5/8" 10'-5 3/8" 10'-1 1/4" 3 5/8" 10'-1 1/4" 12'-1 1/4"
1'-1" 8'-1 1/4" 3 5/8" 7'-11 3/4"
6'-9/1
6"
6'-9 3
/4"
11'-3 1
5/1
6"
20'-10 1
1/1
6"
25'-5 1
/16"
2'-1 1
/4"
12'-4 1/4" 12'-4 3/16" 12'-4 3/16" 18'-4 5/8"
9'-4 1/4" 15'-5 3/4" 15'-5 3/4" 12'-1 1/2"
13'-5/8
"5'-2 3
/8"
12'-7 1
/4"
11'-10 9
/16"
14'-1 1
/4"
2'-4 3/4"
1'
2'-4 3/4"
2'-3/4
"8'-9 1
3/1
6"
1'
1'
3'-11"
9'-9 7
/16"
1
A4.1
2
A4.1
FP4
FP2 FP1
FP17
FP1
FP1
FP4
FP4
FP9
FP12 FP12
FP13
FP14
FP15
FP16
FP21
FP21
FP21
FP21 FP22
FP22
FP10
FP11
FP17 FP17
FP30
FP14
FP17
FP17
FP17
FP19
FP19 FP19 FP19 FP19 FP19
FP19
FP20
FP3
FP1
FP1
FP23
FP21
FP17
FP17
FP1
FP18
FP24
FP17
FP4
FP24
FP17
FP17
FP21
FP21
FP21
FP7
FP6 FP5
FP8
FP1
FP26
FP25 FP25
FP29
FP25
FP25
FP28
FP27
FP31
106
111
110
109
112
113
115
116
117
114
114A
113A
103
104
102
101
IT/
STORAGE
106
REST
ROOM
110
MECH
111
CASUAL MTG
105
REST
ROOM
109
RECEPTION
100
HALL
108
W1
W2
W2
W2
W2
W5
W2
W2
W2
W2 W2
W2
W2 W2
W6
W6
W2
W2
W2
W2
W5
W2
W2
W2
COPY
119LARGE
OFFICE 1
113
LARGE
OFFICE 2
112
CLO.
CONFERENCE
114
LARGE
OFFICE 5
117
LARGE
OFFICE 4
116
HALL
118
BREAK
AREA
120
LARGE
OFFICE 3
115
OFFICE 2
103
OFFICE 3
104
OFFICE 1
102
CLO.
101
W6
OPEN OFFICE
107
W4
W2
W2
W2
W2
W5
W5
W1
W1
W1
20
18
19
Q R R.5Q.5
HARDWARE
L =
LO
CK
SE
T
7'-0"
7'-0"
7'-0"
OFFICE
103
104
106
3'-0"
3'-0"
3'-0"
1 3/4"
1 3/4"
1 3/4"
WD/GL
WD/GL
WOOD
HM
HM
HM
7'-0"
SIZE
OFFICE
RO
OM
NA
ME
OP
EN
ING
NU
MB
ER
102
WID
TH
HE
IGH
T
ELE
VAT
ION
MAT
ER
IAL
1 3/4"
TH
ICK
DOOR
MAT
ER
IAL
ELE
VAT
ION
HM
FRAME
L,S
L,S
REMARKS
D O O R S C H E D U L E
PR,S,CLHMWOOD1 3/4"3'-0" 7'-0"
7'-0"3'-0" 1 3/4" WOOD HM PR,S,CL
7'-0"3'-0" 1 3/4" WOOD HM PS,S
7'-0"3'-0" 1 3/4" WD/GL HM L,S
7'-0"3'-0" 1 3/4" WD/GL HM PS,S
7'-0"3'-0" 1 3/4" WOOD HM PS,S
109
110
111
112
114
114A
OFFICE
IT/STORAGE
RESTROOM
RESTROOM
MECHANICAL
OFFICE
CONFERENCE
CONFERENCE
3'-0" WD/GL
D1
D2
D2
D1
D1
D1
D1
D2
D2
D2
D1
D2
D2
D1
D1
D1
D1
D2
D2
D2
S =
ST
OP
PS
= P
AS
SA
GE
SE
T
CL
= C
LOS
ER
L,S
L,S
PR
= P
RIV
AC
Y S
ET
HINGE STOP
7'-0"3'-0" 1 3/4" WOOD HM PS,S113A CLOSET D1 D1 FLOOR STOP
7'-0"CLOSET101 1 3/4" HM(2)2'-6" WOOD D3 D3 DM,RC,S
7'-0"3'-0" 1 3/4" WD/GL HM L,S113 OFFICE D2 D2
7'-0"3'-0" 1 3/4" WD/GL HM L,S
7'-0"3'-0" 1 3/4" WD/GL HM L,S
115
116
OFFICE
OFFICE D2
D2
D2
D2
7'-0"3'-0" 1 3/4" WD/GL HM L,S117 OFFICE D2 D2
HINGE STOPS
DM
= D
UM
MY
SE
TR
C =
RO
LLE
R C
ATC
H
1.
DOOR SCHEDULE NOTES:
2.
5.
ALL HOLLOW METAL DOOR FRAMES TO PAINTED P2.
CONTRACTOR TO VERIFY DOOR HEIGHT PRIOR TO CONSTRUCTION.
COORDINATE KEYING LOCKSETS WITH TENANT.
ALL DOORS TO BE PAINTED P2 UNLESS NOTED OTHERWISE.
4.
6.
7.
HARDWARE TO BE SCHLAGE, AL SERIES, JUPITER STYLE, 626 FINISH LEVER HARDWARE.
3. ALL EXISTING HOLLOW METAL DOORS AND DOOR FRAMES TO BE PAINTED TO MATCHADJACENT WALL FINISH UNLESS NOTED OTHERWISE.
CLOSERS TO HAVE HOLD OPEN OPTION.
7'-0"
2"
3'-0"2" 2"
7'-0"
2"
3'-0" 2"2" 2'-0"2"
7'-0"
2"
5'-0" 2"2"
D1 D2
HARDWARE TO BE SCHLAGE, AL SERIES, JUPITER STYLE, 626 FINISH LEVER HARDWARE.
D3
SCALE: 1/4" = 1'-0"
1 Construction PlanA1.2
![Untitled-1 [] Company... · 2018. 1. 16. · Smad Construction Smad Sm Smad Construction mad Construction nstruction MAD Smad Construction MAD' Smad Construction MAD Smad Construction](https://static.fdocuments.in/doc/165x107/60b16e4aa21c90011033e8c0/untitled-1-company-2018-1-16-smad-construction-smad-sm-smad-construction.jpg)
