ERouting EIGRP PT Practice SBA
A few things to keep in mind while completing this activity:
1. Do not use the browser Back button or close or reload any Exam windows during the exam.
2. Do not close Packet Tracer when you are done. It will close automatically.
3. Click the Submit Assessment button to submit your work.
IntroductionIn this Packet Tracer Practice Skills-based Assessment, you will:
complete the configuration of a partially configured network
establish connectivity to the West Region and the Internet through the use of static and dynamic routing
verify connectivity
Addressing Table
Device Interface Address Subnet Mask Default Gateway
EastHQ
S0/0/0 192.168.1.249 255.255.255.252 N/A
S0/0/1 192.168.1.253 255.255.255.252 N/A
S0/1/0 209.165.201.6 255.255.255.252 N/A
S0/1/1 192.0.2.2 266.255.255.252 N/A
E-Branch1
Fa0/0 192.168.0.1 255.255.255.128 N/A
Fa0/1 192.168.0.129 255.255.255.128 N/A
S0/0/0 192.168.1.250 255.255.255.252 N/A
S0/0/1 192.168.1.245 255.255.255.252 N/A
E-Branch2
Fa0/0 192.168.1.1 255.255.255.192 N/A
Fa0/1 192.168.1.65 255.255.255.192 N/A
S0/0/0 192.168.1.254 255.255.255.252 N/A
S0/0/1 192.168.1.246 255.255.255.252 N/A
EPC1 NIC 192.168.0.2 255.255.255.128 192.168.0.1
EPC2 NIC 192.168.0.254 255.255.255.128 192.168.0.129
EPC3 NIC 192.168.1.2 255.255.255.192 192.168.1.1
EPC4 NIC 192.168.1.126 255.255.255.192 192.168.1.65
NetAdmin NIC 192.168.1.66 255.255.255.192 192.168.1.65
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.
Step 1: Configure the Device Basics.
Note: Initially, you can only access router E-Branch2 through the console connection on NetAdmin.
a. Configure the following on E-Branch2:
The router name is EB2.
The privileged EXEC mode uses the following encrypted password: class.
Enable Telnet and console line logins and use the following password: cisco.
Configure the banner message-of-the-day as Authorized access only!
b. Using the Addressing Table, configure and activate all the necessary interfaces on E-Branch2.
c. Configure correct host IP addressing.
Configure EPC2 with the last IP address in the subnet.
Configure EPC4 with the last IP address in the subnet.
Router(config)# hostname EB2
EB2(config)#enable secret class
EB2(config)#line vty 0 4
EB2(config)#password class
EB2(config)#login
EB2(config)#line console 0
EB2(config)#password class
EB2(config)#banner motd %Authorized access only!%
EC2 192.168.0.254 255.255.255.128 Default gateway 192.168.0.129
EC4 192.168.1.126 255.255.255.192 Default gateway 192.168.0.65
EB2(config )#interface Fa0/0
EB2(config-if)#ip address 192.168.1.1 255.255.255.192
EB2(config-if)#no shutdown
EB2(config )#interface Fa0/1
EB2(config-if)#ip address 192.168.1.65 255.255.255.192
EB2(config-if)#no shutdown
EB2(config )#interface s0/0/0
EB2(config-if)#ip address 192.168.1.254 255.255.255.252
EB2(config-if)#no shutdown
EB2(config )#interface s0/0/1
EB2(config-if)#ip address 192.168.1.246 255.255.255.252
EB2(config-if)#no shutdown
Step 2: Discover the Network.
a. Explore the network to determine the IP address of the serial interface that EastHQ uses to connect to E-Branch2.
b. Remotely access EastHQ.
Step 3: Configure Static and Default Routing.
a. Configure connectivity to the West Region.
Configure a static route on EastHQ to the entire West Region. The West Region uses the 172.16.100.0/24 address space. Use the next-hop address argument.
Configure a default route on EastHQ to send to the Internet all other traffic for destinations that are not found in the EastHQ routing table. Use the exit interface argument.
b. Verify static and default routing.
EastHQ(config)#ip route 172.16.100.0 255.255.255.0 192.0.2.1
EastHQ(config)#ip route 0.0.0.0 0.0.0.0 serial0/1/0
Step 4: Configure EIGRP Routing.
Configure EIGRP on EastHQ, E-Branch1, and E-Branch2.
a. Use AS number 100.
b. Do not advertise the network between EastHQ and the Internet.
c. Do not advertise the network between EastHQ and the West Region.
d. Advertise all other attached networks.
e. Disable automatic summarization.
f. Disable EIGRP updates out interfaces where there are no EIGRP neighbors available.
g. On EastHQ, enter the one command in the EIGRP routing process that will propagate the default and static routes to E-Branch1 and E-Branch2.
EastHQ(config)#router eigrp 100
EastHQ(config-router)#network 192.168.1.249 255.255.255.252
EastHQ(config-router)#network 192.168.1.253 255.255.255.252
EastHQ(config-router)#no auto-summary
EastHQ(config-router)#passive-interface s0/1/0
EastHQ(config-router)#passive-interface s0/1/1
EastHQ(config-router)#redistribute static
EB1(config)#router eigrp 100
EB1(config-router)#network 192.168.0.1 255.255.255.128
EB1(config-router)#network 192.168.0.129 255.255.255.128
EB1(config-router)#network 192.168.1.250 255.255.255.252
EB1(config-router)#network 192.168.1.245 255.255.255.252
EB1(config-router)#passive-interface fa0/0
EB1(config-router)#passive-interface fa0/1
EB2(config)#router eigrp 100
EB2(config-router)#network 192.168.1.1 255.255.255.192
EB2(config-router)#network 192.168.1.65 255.255.255.192
EB2(config-router)#network 192.168.1.254 255.255.255.252
EB2(config-router)#network 192.168.1.246 255.255.255.252
EB2(config-router)#passive-interface fa0/0
EB2(config-router)#passive-interface fa0/1
Step 5: Modify the default EIGRP operation.
a. Configure the link between EastHQ and E-Branch2 so that the correct bandwidth of 384 k/s is used in EIGRP calculations.
b. Configure E-Branch1 to advertise a summary route for the subnets 192.168.0.0/25 and 192.168.0.128/25 to EastHQ and E-Branch2.
c. Configure E-Branch2 to advertise a summary route for the subnets 192.168.1.0/26 and 192.168.1.64/26 to EastHQ and E-Branch1.
EastHQ(config)#interface s0/0/1
EastHQ(config-if)#bandwidth 384
EB2(config)#interface s0/0/0
EB2(config-if)#bandwidth 384
E-Branch1
EB1(config)#interface s0/0/0
EB1(config-if)#ip summary-address eigrp 100 192.168.0.0 255.255.255.0
EB1(config)#interface s0/0/1
EB1(config-if)#ip summary-address eigrp 100 192.168.0.0 255.255.255.0
E-Branch2
EB2(config)#interface s0/0/0
EB2(config-if)#ip summary-address eigrp 100 192.168.1.0 255.255.255.128
EB2(config)#interface s0/0/1
EB2(config-if)# ip summary-address eigrp 100 192.168.1.0 255.255.255.128
Step 6: Verify Full Connectivity.
Although these are not scored, the following connectivity tests should be successful.
Test connectivity to the West Region.
Test connectivity to the Internet.
Top Related