ERouting EIGRP PT Practice SBA

ERouting EIGRP PT Practice SBA

A few things to keep in mind while completing this activity:

1. Do not use the browser Back button or close or reload any Exam windows during the exam.

2. Do not close Packet Tracer when you are done. It will close automatically.

3. Click the Submit Assessment button to submit your work.

IntroductionIn this Packet Tracer Practice Skills-based Assessment, you will:

complete the configuration of a partially configured network

establish connectivity to the West Region and the Internet through the use of static and dynamic routing

verify connectivity

Addressing Table

Device Interface Address Subnet Mask Default Gateway

EastHQ

S0/0/0 192.168.1.249 255.255.255.252 N/A

S0/0/1 192.168.1.253 255.255.255.252 N/A

S0/1/0 209.165.201.6 255.255.255.252 N/A

S0/1/1 192.0.2.2 266.255.255.252 N/A

E-Branch1

Fa0/0 192.168.0.1 255.255.255.128 N/A

Fa0/1 192.168.0.129 255.255.255.128 N/A

S0/0/0 192.168.1.250 255.255.255.252 N/A

S0/0/1 192.168.1.245 255.255.255.252 N/A

E-Branch2

Fa0/0 192.168.1.1 255.255.255.192 N/A

Fa0/1 192.168.1.65 255.255.255.192 N/A

S0/0/0 192.168.1.254 255.255.255.252 N/A

S0/0/1 192.168.1.246 255.255.255.252 N/A

EPC1 NIC 192.168.0.2 255.255.255.128 192.168.0.1

EPC2 NIC 192.168.0.254 255.255.255.128 192.168.0.129

EPC3 NIC 192.168.1.2 255.255.255.192 192.168.1.1

EPC4 NIC 192.168.1.126 255.255.255.192 192.168.1.65

NetAdmin NIC 192.168.1.66 255.255.255.192 192.168.1.65

Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.

Step 1: Configure the Device Basics.

Note: Initially, you can only access router E-Branch2 through the console connection on NetAdmin.

a. Configure the following on E-Branch2:

The router name is EB2.

The privileged EXEC mode uses the following encrypted password: class.

Enable Telnet and console line logins and use the following password: cisco.

Configure the banner message-of-the-day as Authorized access only!

b. Using the Addressing Table, configure and activate all the necessary interfaces on E-Branch2.

c. Configure correct host IP addressing.

Configure EPC2 with the last IP address in the subnet.

Configure EPC4 with the last IP address in the subnet.

Router(config)# hostname EB2

EB2(config)#enable secret class

EB2(config)#line vty 0 4

EB2(config)#password class

EB2(config)#login

EB2(config)#line console 0

EB2(config)#password class

EB2(config)#banner motd %Authorized access only!%

EC2 192.168.0.254 255.255.255.128 Default gateway 192.168.0.129

EC4 192.168.1.126 255.255.255.192 Default gateway 192.168.0.65

EB2(config )#interface Fa0/0

EB2(config-if)#ip address 192.168.1.1 255.255.255.192

EB2(config-if)#no shutdown

EB2(config )#interface Fa0/1



EB2(config )#interface s0/0/0



EB2(config )#interface s0/0/1



Step 2: Discover the Network.

a. Explore the network to determine the IP address of the serial interface that EastHQ uses to connect to E-Branch2.

b. Remotely access EastHQ.

Step 3: Configure Static and Default Routing.

a. Configure connectivity to the West Region.

Configure a static route on EastHQ to the entire West Region. The West Region uses the 172.16.100.0/24 address space. Use the next-hop address argument.

Configure a default route on EastHQ to send to the Internet all other traffic for destinations that are not found in the EastHQ routing table. Use the exit interface argument.

b. Verify static and default routing.

EastHQ(config)#ip route 172.16.100.0 255.255.255.0 192.0.2.1

EastHQ(config)#ip route 0.0.0.0 0.0.0.0 serial0/1/0

Step 4: Configure EIGRP Routing.

Configure EIGRP on EastHQ, E-Branch1, and E-Branch2.

a. Use AS number 100.

b. Do not advertise the network between EastHQ and the Internet.

c. Do not advertise the network between EastHQ and the West Region.

d. Advertise all other attached networks.

e. Disable automatic summarization.

f. Disable EIGRP updates out interfaces where there are no EIGRP neighbors available.

g. On EastHQ, enter the one command in the EIGRP routing process that will propagate the default and static routes to E-Branch1 and E-Branch2.

EastHQ(config)#router eigrp 100

EastHQ(config-router)#network 192.168.1.249 255.255.255.252

EastHQ(config-router)#network 192.168.1.253 255.255.255.252

EastHQ(config-router)#no auto-summary

EastHQ(config-router)#passive-interface s0/1/0

EastHQ(config-router)#passive-interface s0/1/1

EastHQ(config-router)#redistribute static

EB1(config)#router eigrp 100

EB1(config-router)#network 192.168.0.1 255.255.255.128




EB1(config-router)#passive-interface fa0/0


EB2(config)#router eigrp 100







Step 5: Modify the default EIGRP operation.

a. Configure the link between EastHQ and E-Branch2 so that the correct bandwidth of 384 k/s is used in EIGRP calculations.

b. Configure E-Branch1 to advertise a summary route for the subnets 192.168.0.0/25 and 192.168.0.128/25 to EastHQ and E-Branch2.

c. Configure E-Branch2 to advertise a summary route for the subnets 192.168.1.0/26 and 192.168.1.64/26 to EastHQ and E-Branch1.

EastHQ(config)#interface s0/0/1

EastHQ(config-if)#bandwidth 384

EB2(config)#interface s0/0/0

EB2(config-if)#bandwidth 384

E-Branch1


EB1(config-if)#ip summary-address eigrp 100 192.168.0.0 255.255.255.0



E-Branch2




EB2(config-if)# ip summary-address eigrp 100 192.168.1.0 255.255.255.128

Step 6: Verify Full Connectivity.

Although these are not scored, the following connectivity tests should be successful.

Test connectivity to the West Region.

Test connectivity to the Internet.

ERouting EIGRP PT Practice SBA

Documents

Transcript of ERouting EIGRP PT Practice SBA