ENHANCED BATTLE RIFLE
CHASSIS SYSTEM
ALL VARIANTS
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M
1A
-M
14
, M
1 G
AR
AN
D, M
IN
I-1
4®
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD MODEL
MODEL M14ALCS
OVERALL LENGTH COLLAPSED
27.5” (69.85 CM)
OVERALL LENGTH EXTENDED
33.5” (85.10 CM)
WEIGHT 5.1 LBS (2.3 KG)
LENGTH OF PULL COLLAPSED
9” (22.85 CM)
LENGTH OF PULL EXTENDED
15” (38.10 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M
1/M
14
E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M14ALCS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS is a drop-in chassis and features a six position telescoping stock and an adjustable polymer cheek rest with two inches of vertical adjustment. Additionally the chassis includes five Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell, and a soft one inch recoil pad. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.
PRODUCT SPECIFICATIONS
MODEL M14ALCS/CV
OVERALL LENGTH COLLAPSED
N/A - NO BUTT STOCK INCLUDED
OVERALL LENGTH 28” (71.12 CM)
WEIGHT 3.5 LBS (1.6 KG)
LENGTH OF PULL COLLAPSED
N/A - NO BUTT STOCK INCLUDED
LENGTH OF PULL EXTENDED
N/A - NO BUTT STOCK INCLUDED
FINISH MIL-SPEC HARD ANODIZE
GRIP TANGODOWN® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M
1/M
14
E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M14ALCS/CV Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS/CV is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a TangoDown® BATTLEGRIP®. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.
PRODUCT SPECIFICATIONS
MODEL M14ALCS/CVFS
OVERALL LENGTH COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
OVERALL LENGTH 33.5” (85.10 CM)
WEIGHT 5.1 LBS (2.3 KG)
LENGTH OF PULL COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
LENGTH OF PULL EXTENDED
15” (38.10 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP INTEGRAL SYNTHETIC GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M1
/M
14
E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M14ALCS/CVFS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS/CVFS is a drop-in chassis and features an all-weather fiberglass reinforced synthetic monte-carlo butt stock with an integral grip and rubber recoil pad. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD MODEL
MODEL M14ALCS/CV16FS
OVERALL LENGTH COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
OVERALL LENGTH 33.5” (85.10 CM)
WEIGHT 5.1 LBS (2.3 KG)
LENGTH OF PULL COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
LENGTH OF PULL EXTENDED
15” (38.10 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M
1/M
14
E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M14ALCS/CV16FS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS/CV16FS is a drop-in chassis and features an all-weather, non-adjustable, synthetic M16 butt stock. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD MODEL
MODEL M14ALCS/PMRI
OVERALL LENGTH COLLAPSED
32.75” (83.19 CM)
OVERALL LENGTH EXTENDED
34.25” (87.00 CM)
WEIGHT 5.5 LBS (2.50 KG)
LENGTH OF PULL COLLAPSED
13” (33.00 CM)
LENGTH OF PULL EXTENDED
14.5” (36.83 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M
1/M
14
E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M14ALCS/PMRI Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS/PMRI is a drop-in chassis and features an adjustable MAGPUL® PRS2® butt stock. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD HEAVY WEIGHT MODEL
MODEL M14ALCS-HB
OVERALL LENGTH COLLAPSED
27.5” (69.85 CM)
OVERALL LENGTH EXTENDED
33.5” (85.10 CM)
WEIGHT 5.1 LBS (2.3 KG)
LENGTH OF PULL COLLAPSED
9” (22.85 CM)
LENGTH OF PULL EXTENDED
15” (38.10 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M1
/M
14
E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M14ALCS-HB Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with heavy weight barrels only. The M14ALCS-HB is a drop-in chassis and features a six position telescoping stock and an adjustable polymer cheek rest with two inches of vertical adjustment. Additionally the chassis includes five Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell, and a soft one inch recoil pad. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD HEAVY WEIGHT MODEL
MODEL M14ALCS/CV-HB
OVERALL LENGTH COLLAPSED
N/A - NO BUTT STOCK INCLUDED
OVERALL LENGTH EXTENDED
28” (71.12 CM)
WEIGHT 3.5 LBS (1.6 KG)
LENGTH OF PULL COLLAPSED
N/A - NO BUTT STOCK INCLUDED
LENGTH OF PULL EXTENDED
N/A - NO BUTT STOCK INCLUDED
FINISH MIL-SPEC HARD ANODIZE
GRIP TANGODOWN® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M
1/M
14
E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M14ALCS/CV-HB Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with heavy weight barrels only. The M14ALCS/CV-HB is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a TangoDown® BATTLEGRIP®. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD HEAVY WEIGHT MODEL
MODEL M14ALCS/CVFS-HB
OVERALL LENGTH COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
OVERALL LENGTH EXTENDED
33.5” (85.10 CM)
WEIGHT 5.1 LBS (2.3 KG)
LENGTH OF PULL COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
LENGTH OF PULL EXTENDED
15” (38.10 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP INTEGRAL SYNTHETIC GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M
1/M
14
E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M14ALCS/CVFS-HB Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with heavy weight barrels only. The M14ALCS/CVFS-HB is a drop-in chassis and features an all-weather fiberglass reinforced synthetic monte-carlo butt stock with an integral grip and rubber recoil pad. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD HEAVY BARREL MODEL
MODEL M14ALCS/PMRI-HB
OVERALL LENGTH COLLAPSED
32.75” (83.19 CM)
OVERALL LENGTH EXTENDED
34.25” (87.00 CM)
WEIGHT 5.5 LBS (2.5 KG)
LENGTH OF PULL COLLAPSED
13” (33.00 CM)
LENGTH OF PULL EXTENDED
14.5” (36.83 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M1
/M
14
E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M14ALCS/PMRI-HB Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with heavy weight barrels only. The M14ALCS/PMRI-HB is a drop-in chassis and features an adjustable MAGPUL® PRS2® butt stock. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD MODEL
MODEL M1GALCS
OVERALL LENGTH COLLAPSED
33.25” (84.45 CM)
OVERALL LENGTH EXTENDED
39.50 (100.33 CM)
WEIGHT 5.5 LBS (2.50 KG)
LENGTH OF PULL COLLAPSED
9” (22.85 CM)
LENGTH OF PULL EXTENDED
15” (38.10 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M1
G
AR
AN
D E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M1GALCS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Garand rifles with standard length barrels. The M1GALCS is a drop-in chassis and features a six position telescoping stock and an adjustable polymer cheek rest with two inches of vertical adjustment. Additionally the chassis includes five Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell, and a soft one inch recoil pad. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing.
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD MODEL
MODEL M1GALCS/CV
OVERALL LENGTH COLLAPSED
N/A - NO BUTT STOCK INCLUDED
OVERALL LENGTH EXTENDED
34.25” (87.00 CM)
WEIGHT 4.0 LBS (1.81 KG)
LENGTH OF PULL COLLAPSED
N/A - NO BUTT STOCK INCLUDED
LENGTH OF PULL EXTENDED
N/A - NO BUTT STOCK INCLUDED
FINISH MIL-SPEC HARD ANODIZE
GRIP TANGODOWN® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M1
G
AR
AN
D E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M1GALCS/CV Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Garand rifles with standard length barrels. The M1GALCS/CV is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a TangoDown® BATTLEGRIP®. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing.
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD MODEL
MODEL M1GALCS/CVFS
OVERALL LENGTH COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
OVERALL LENGTH 39.50 (100.33 CM)
WEIGHT 5.5 LBS (2.50 KG)
LENGTH OF PULL COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
LENGTH OF PULL EXTENDED
15” (38.10 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP INTEGRAL SYNTHETIC GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M
1 G
AR
AN
D E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M1GALCS/CVFS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Garand rifles with standard length barrels. The M1GALCS/CVFS is a drop-in chassis and features an all-weather fiberglass reinforced synthetic monte-carlo butt stock with an integral grip and rubber recoil pad. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in a black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing.
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD MODEL
MODEL M1GALCS/CV16FS
OVERALL LENGTH COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
OVERALL LENGTH EXTENDED
39.50 (100.33 CM)
WEIGHT 5.5 LBS (2.50 KG)
LENGTH OF PULL COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
LENGTH OF PULL EXTENDED
15” (38.10 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M1
G
AR
AN
D E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M1GALCS/CV16FS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Garand rifles with standard length barrels. The M1GALCS/CV16FS is a drop-in chassis and features an all-weather, non-adjustable, synthetic M16 butt stock. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing.
PRODUCT SPECIFICATIONS
*SHOWN AS STANDARD MODEL
MODEL M1GALCS/PMRI
OVERALL LENGTH COLLAPSED
36.75” (93.35 CM)
OVERALL LENGTH EXTENDED
38.25” (97.16 CM)
WEIGHT 5.6 LBS (2.54 KG)
LENGTH OF PULL COLLAPSED
13” (33.00 CM)
LENGTH OF PULL EXTENDED
14.5” (36.83 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M1
G
AR
AN
D E
NH
AN
CE
D B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M1GALCS/PMRI Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Garand rifles with standard length barrels. The M1GALCS/PMRI is a drop-in chassis and features an adjustable MAGPUL® PRS2® butt stock. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in a black factory direct and in other colors only through licensed SAGE resellers.
* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing.
PRODUCT SPECIFICATIONS
MODEL MINIALCS/CV
OVERALL LENGTH COLLAPSED
N/A - NO BUTT STOCK INCLUDED
OVERALL LENGTH 25.5” (64.8 CM)
WEIGHT 3.1 LBS (1.40 KG)
LENGTH OF PULL COLLAPSED
N/A - NO BUTT STOCK INCLUDED
LENGTH OF PULL EXTENDED
N/A - NO BUTT STOCK INCLUDED
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
M
IN
I-1
4®
C
HA
SS
IS
S
TO
CK
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The MINIALCS/CV Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Ruger Mini-14® Autoloading Rifles. The MINIALCS/CV is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a soft ERGO® Grip. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors/variations only through licensed SAGE resellers.
* Not compatible with the Mini-30®, or the 180 series of the Mini-14®. Mini-14® is a registered trademark of Sturm, Ruger & Co.
PRODUCT SPECIFICATIONS
MODEL MINIALCS/CVFS
OVERALL LENGTH COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
OVERALL LENGTH EXTENDED
30.5” (77.5 CM)
WEIGHT 3.4 LBS (1.54 KG)
LENGTH OF PULL COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
LENGTH OF PULL EXTENDED
15” (38.10 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
MIN
I-1
4®
C
HA
SS
IS
S
TO
CK
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The MINIALCS/CVFS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Ruger Mini-14® Autoloading Rifles. The MINIALCS/CVFS is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a soft ERGO® Grip. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors/variations only through licensed SAGE resellers.
* Not compatible with the Mini-30®, or the 180 series of the Mini-14®. Mini-14® is a registered trademark of Sturm, Ruger & Co.
PRODUCT SPECIFICATIONS
MODEL MINIALCS/CV16FS
OVERALL LENGTH COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
OVERALL LENGTH EXTENDED
30.5” (77.5 CM)
WEIGHT 3.4 LBS (1.54 KG)
LENGTH OF PULL COLLAPSED
N/A – BUTT STOCK DOES NOT COLLAPSE
LENGTH OF PULL EXTENDED
15” (38.10 CM)
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
B
AT
TL
E R
IF
LE
C
HA
SS
IS
S
YS
TE
MS
MIN
I-1
4®
C
HA
SS
IS
S
TO
CK
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The MINIALCS/CV16FS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Ruger Mini-14® Autoloading Rifles. The MINIALCS/CV16FS is a drop-in chassis and features an all-weather, non-adjustable, synthetic M16 butt stock and a soft ERGO® Grip. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors/variations only through licensed SAGE resellers.
* Not compatible with the Mini-30®, or the 180 series of the Mini-14®. Mini-14® is a registered trademark of Sturm, Ruger & Co.
PRODUCT SPECIFICATIONS
* SHOWN WITH OPTIONAL EXTRAS, RIFLE NOT INCLUDED
MODEL M1CALCS/CV
OVERALL LENGTH COLLAPSED
N/A – NO BUTT STOCK INCLUDED
OVERALL LENGTH 26” (66.04 CM)
WEIGHT 2.4 LBS (1.08 KG)
LENGTH OF PULL COLLAPSED
N/A – NO BUTT STOCK INCLUDED
LENGTH OF PULL EXTENDED
N/A – NO BUTT STOCK INCLUDED
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
T
AC
TIC
AL
C
AR
BIN
E C
HA
SS
IS
M
1 C
AR
BIN
E C
HA
SS
IS
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The M1CALCS/CV Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Carbine Autoloading Rifles. The M1CALCS/CV is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a soft ERGO® Grip. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, dual push button rear sling studs, and 360° ventilation cuts to help dissipate heat. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors/variations only through licensed SAGE resellers.
PRODUCT SPECIFICATIONS
* SHOWN WITH OPTIONAL EXTRAS, RIFLE NOT INCLUDED
MODEL SKSCS/CV
OVERALL LENGTH COLLAPSED
N/A – NO BUTT STOCK INCLUDED
OVERALL LENGTH 30.50” (77.5 CM)
WEIGHT 2.3 LBS (1.0 KG)
LENGTH OF PULL COLLAPSED
N/A – NO BUTT STOCK INCLUDED
LENGTH OF PULL EXTENDED
N/A – NO BUTT STOCK INCLUDED
FINISH MIL-SPEC HARD ANODIZE
GRIP ERGO® GRIP
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
S
KS
C
HA
SS
IS
S
KS
C
HA
SS
IS
S
TO
CK
S
YS
TE
M
989.739.7000 www.sageinternationalltd.com
DETAILS The SKSCS/CV Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits all factory original SKS rifles. The SKSCS/CV is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a soft ERGO® Grip. Ventilation cuts in the chassis and hand-guard help to quickly dissipate heat. Option tri-rail kit is available for quickly mounting accessories. Rigidity of the chassis increases accuracy and reliability. Eliminates the need for additional bedding. Available in black factory direct and in other colors/variations only through licensed SAGE resellers.
EBR ACCESSORIES
& EQUIPMENT
ALL VARIANTS
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
PRODUCT SPECIFICATIONS
*SHOWN WITH OPTIONAL EXTRAS – RIFLE & CHASSIS NOT INCLUDED
MODEL M14SCSB
RAIL LENGTH 1.00” (2.54 CM)
OVERALL LENGTH 1.25” (3.18 CM)
OVERALL HEIGHT .45” (1.13 CM)
WEIGHT .1 LBS (.05 KG)
FINISH BLACK NITRIDE
ACCESSORIES NOT APPLICABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
S
TR
IP
PE
R C
LIP
SIG
HT
B
AS
E
989.739.7000 www.sageinternationalltd.com
DETAILS The M14SCSB (Stripper Clip Sight Base) is a 1913 Picatinny Rail insert specifically designed for use on Mil-Spec M1/M14 rifles that are installed in a SAGE M14 EBR Chassis Stock Systems. The M14SCSB is precision machined from ordnance grade steel and replaces the existing factory stripper clip guide. The base permits in-line mounting of scoped optics and accessories. The M14SCSB shape also allows clear through access to the ejection port. Includes a stainless steel set screw and installation does not require any permanent modifications to the rifle or sight base. The SAGE M14SCSB is NOT designed to align with other NON-SAGE chassis stock systems. Fitting SAGE M14SCSB to non Mil-Spec/Commercial rifles may require
additional gunsmithing.
PRODUCT SPECIFICATIONS
MODEL M14DCSB
RAIL LENGTH 6.75” (17.15 CM)
OVERALL LENGTH 9.75” (24.76 CM)
OVERALL HEIGHT .85” (2.16 CM)
WEIGHT .5 LBS (.22 KG)
FINISH MIL-SPEC HARD ANODIZE
ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
D
ET
AC
HA
BL
E C
AN
TIL
EV
ER
ED
S
IG
HT
B
AS
E
989.739.7000 www.sageinternationalltd.com
DETAILS The M14DCSB (Detachable Cantilevered Sight Base) is a precision CNC machined, aluminum removable 1913 Picatinny Rail sight base. Fits all SAGE M14 EBR Chassis Stock Systems. The M14DCSB completely bridges the M14 action back to the rear sight and is fully adjustable for oversized or undersized rails. It features a positive cam locking mechanism that allows rail surfaces to be engaged by flat non-scuffing pads. Additionally the sight base is fully supported on both ends, providing superior rigidity and reliable re-zeroing of optics. Includes an all steel construction stripper clip insert with a stainless steel set screw and a stainless steel base adjustment screw to stop vertical and lateral shifting. M14DCSB installation requires no modifications to the rifle or sight base. Available in black factory direct and in other colors only through licensed SAGE resellers.
PRODUCT SPECIFICATIONS
MODEL M14VFG
MATERIAL HARD PLASTIC
OVERALL WIDTH 1.25” (3.18 CM) AT WIDEST POINT
OVERALL HEIGHT 4.5” (11.43 CM)
WEIGHT .4 LBS (.18 KG)
COLOR BLACK
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
V
ER
TIC
AL
F
OR
E-G
RIP
989.739.7000 www.sageinternationalltd.com
DETAILS The M14VFG (Vertical Fore-Grip) is specifically designed for use on M1/M14, M1 GARAND, & MINI-14/30® SAGE EBR Chassis Stock Systems. The M14VFG attaches to the underside of an EBR Stock via a knurled thumb-type screw and is secured by an integral guide pin. Constructed using the highest quality materials, the M14VFG is lightweight and extremely durable. The M14VFG provides additional control during rapid fire and can be removed easily and quickly by adjusting the threaded core. Not designed to be used with other manufacturers chassis systems or
stocks.
PRODUCT SPECIFICATIONS
*DOES NOT INCLUDE RIFLE OR CHASSIS
MODEL M14APRS
MATERIAL ALUMINUM
OVERALL LENGTH 2” (5.08 CM)
OVERALL HEIGHT .40” (1.02 CM)
WEIGHT .8 OZ (.02 KG)
FINISH HARD ANODIZE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
A
DA
PT
ER
P
IC
AT
IN
NY
R
AIL
S
EC
TIO
N
989.739.7000 www.sageinternationalltd.com
DETAILS The M14APRS (Adapter Picatinny Rail Section) is specifically designed for use on M1/M14, M1 GARAND, & MINI-14/30® SAGE EBR Chassis Stock Systems. The M14APRS attaches to the underside of an EBR Stock via two screws and facilitates the mounting of aftermarket vertical fore-grips without removing the protective Kydex forearm.
Precision machined from aircraft grade aluminum and finished with Mil-Spec hard anodizing. The M14APRS is also movable forward and aft four (4) positions to allow for further range of fore-grip placement. Fits same hole pattern as the SAGE M14VFG. Includes two (2) mounting screws.
PRODUCT SPECIFICATIONS
MODEL M14ERGO
MATERIAL TEXTURED RUBBER AND PLASTIC
OVERALL WIDTH 1.25” (3.18 CM) AT WIDEST POINT
OVERALL HEIGHT 4.5” (11.43 CM)
WEIGHT .2 LBS (.09 KG)
COLOR BLACK OR TAN (PLEASE SPECIFY)
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
E
RG
O G
RIP
989.739.7000 www.sageinternationalltd.com
DETAILS The M14ERGO is a soft textured pistol
grip specifically designed for use on
MOD-0 style M1/M14 & M1 GARAND
SAGE EBR Chassis Stock Systems.
Manufactured to SAGE EBR
specifications for the proper function
of the MOD-0 telescoping stock, the
M14ERGO will not function with other
manufacturers chassis systems or
stocks.
The M14ERGO replaces the old style
EBR hard plastic grip. Features
ergonomically correct finger grooves
and is virtually impervious to
oils/solvents.
Textured finish offer operators better control and features a bottom storage with tethered rubber plug. Ambidextrous design. Not designed for use with other manufacturers chassis systems or stocks. Only available from SAGE or authorized
SAGE resellers/distributors.
PRODUCT SPECIFICATIONS
MODEL M14FACC
MATERIAL ALUMINUM
OVERALL LENGTH 1.85” (4.70 CM)
OVERALL HEIGHT .65” (1.65 CM) AT TALLEST POINT
WEIGHT .2 OZ (.005 KG)
COLOR BLACK
FINISH HARD ANODIZE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
F
UL
L A
UT
O C
UT
-O
UT
C
OV
ER
989.739.7000 www.sageinternationalltd.com
DETAILS
The M14FACC (Full Auto Cut-Out
Cover) is specifically designed to
fill the full auto selector clearance
cut on M1/M14 SAGE EBR Chassis
Stock Systems.
The M14FACC is precision CNC
machined from billet aircraft grade
aluminum and is finished in a hard
anodize.
Prevents dirt & debris from
entering action and features two
upper guide pins to prevent
shifting while installed in the
chassis system.
Manufactured to SAGE EBR
specifications and is not
compatible with other M1/M14
stock systems.
Only available from SAGE or
authorized SAGE
resellers/distributors.
PRODUCT SPECIFICATIONS
MODEL M14BEK
MATERIAL ALUMINUM
OVERALL WIDTH 1” (2.54 CM)
OVERALL HEIGHT 4.12” (10.46 CM)
WEIGHT .2 LBS (.09 KG)
COLOR BLACK
FINISH HARD ANODIZE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
B
UT
TS
TO
CK
E
XT
EN
SIO
N K
IT
989.739.7000 www.sageinternationalltd.com
DETAILS
The M14BEK (Buttstock Extension
Kit) is a one inch (1") buttstock
extension kit that is specifically
designed for use on MOD-0 style
M1/M14 & M1 GARAND SAGE EBR
Chassis Stock Systems.
The M14BEK is precision CNC
machined from billet aircraft grade
aluminum and is finished in a hard
anodize.
Replaces the factory buttplate
intermediate spacer (Part #90911)
and increases the length of pull by
one inch (1”). Does not interfere
with adjustable cheek rest
function.
Only available from SAGE or
authorized SAGE
resellers/distributors.
Includes mounting hardware.
PRODUCT SPECIFICATIONS
MODEL M14VABEK/ALCS
MATERIAL ALUMINUM
OVERALL WIDTH 1.25” (3.18 CM) AT WIDEST POINT
OVERALL HEIGHT 5.25” (13.33 CM)
WEIGHT .4 LBS (.18 KG)
COLOR BLACK
FINISH HARD ANODIZE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
V
ER
TIC
AL
A
DJ
US
TA
BL
E B
UT
TS
TO
CK
E
XT
EN
SIO
N K
IT
989.739.7000 www.sageinternationalltd.com
DETAILS The M14VABEK/ALCS (Vertical Adjustable Buttstock Extension Kit) is a 1.5" buttstock extension kit that is specifically designed for use on MOD-0 style M1/M14 & M1 GARAND SAGE EBR Chassis Stock Systems. The M14VABEK/ALCS is precision CNC machined from billet aircraft grade aluminum and is finished in a hard anodize. Replaces the factory buttplate intermediate spacer (Part #90911) and increases the length of pull by 1.5”. Does not interfere with adjustable cheek rest function. Also allows for 1.5” of vertical buttplate adjustment. Only available from SAGE or authorized SAGE resellers/distributors.
Includes mounting hardware.
PRODUCT SPECIFICATIONS
*RIFLE AND CHASSIS NOT INCLUDED
MODEL M14VABEK/PMRI
MATERIAL ALUMINUM
OVERALL LENGTH 1.5” (3.8 CM)
OVERALL HEIGHT 4.75” (12.06 CM)
WEIGHT .4 LBS (.18 KG)
COLOR BLACK
FINISH HARD ANODIZE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
V
ER
TIC
AL
A
DJ
US
TA
BL
E B
UT
TS
TO
CK
E
XT
EN
SIO
N K
IT
989.739.7000 www.sageinternationalltd.com
DETAILS
The M14VABEK/PMRI (Vertical Adjustable Buttstock Extension Kit) is a 1.5" buttstock extension kit that is specifically designed for use on PMRI style M1/M14 & M1 GARAND SAGE EBR Chassis Stock Systems. The M14VABEK/PMRI is precision CNC machined from billet aircraft grade aluminum and is finished in a hard anodize. Replaces the factory buttplate intermediate spacer (Part #90911) and increases the length of pull by 1.5”. Does not interfere with adjustable cheek rest function. Also allows for 1.5” of vertical buttplate adjustment. Only available from SAGE or authorized SAGE resellers/distributors.
Includes mounting hardware.
PRODUCT SPECIFICATIONS
MODEL M14ALCS-BS
MATERIAL ALUMINUM & STEEL
LENGTH OF PULL EXTENDED
15” (38.1 CM)
LENGTH OF PULL COLLAPSED
9” (22.86 CM)
WEIGHT 2.4 LBS (1.08 KG)
COLOR BLACK (ADDITIONAL COLORS VARY)
FINISH HARD ANODIZE & BLACK NITRIDE
GRIP ERGO® GRIP
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
T
EL
ES
CO
PIN
G B
UT
TS
TO
CK
(M
OD
-O
)
989.739.7000 www.sageinternationalltd.com
DETAILS
The M14ALCS-BS is a complete telescoping buttstock conversion kit that is specifically designed for use on M1/M14 & M1 GARAND SAGE EBR Chassis Stock Systems. Converts EBR stocks to ALCS (MOD-0) style. Telescoping design provides six (6) length positions. Adjustable cheek rest has two inches (2") of travel in one quarter inch (.25") increments. Features a self stowing tensioning wrench to securely lock cheek rest into position. Aluminum parts are Mil-Spec hard anodize & all steel components are black nitride finished. Only available from SAGE or authorized SAGE resellers/distributors. Includes mounting hardware and
sling plate.
PRODUCT SPECIFICATIONS
MODEL M14ALCS/CVFS-BS
MATERIAL SYNTHETIC PLASTIC
OVERALL LENGTH 13.75” (34.92 CM)
OVERALL HEIGHT 5” (12.7 CM) AT TALLEST POINT
WEIGHT 1.4 LBS (.63 KG)
COLOR BLACK
GRIP INTEGRAL SEMI-PISTOL GRIP
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
F
IX
ED
S
YN
TH
ET
IC
B
UT
TS
TO
CK
989.739.7000 www.sageinternationalltd.com
DETAILS
The M14ALCS/CVFS-BS is a
synthetic fixed buttstock
conversion kit that is specifically
designed for use on M1/M14 & M1
GARAND SAGE EBR Chassis
Stock Systems.
Converts EBR stocks to
ALCS/CVFS (fixed stock) style. All
weather fiberglass reinforced
synthetic stock features scratch-
resistant finish that resists wear.
Features a Monte-Carlo style cheek
rest and checkered integral semi-
pistol grip. Includes 1" rubber
recoil pad & double front sling
loop plate.
Only available from SAGE or an
authorized SAGE
resellers/distributors.
Includes mounting hardware and
sling plate.
PRODUCT SPECIFICATIONS
MODEL M14ALCS/PMRI-BS
MATERIAL ALUMINUM
OVERALL LENGTH 13” (33.02 CM) COLLAPSED
14.5” (36.83 CM) EXTENDED
OVERALL HEIGHT 6.25” (15.87 CM) DOWN 8” (20.32 CM) UP
WEIGHT 2.7 LBS (1.22 KG)
COLOR BLACK
GRIP INTEGRAL SEMI-PISTOL GRIP
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
P
MR
I B
UT
TS
TO
CK
989.739.7000 www.sageinternationalltd.com
DETAILS The M14ALCS/PMRI-BS is MAGPUL® PRS2™ butt stock conversion kit that is specifically designed for use on M1/M14 & M1 GARAND SAGE EBR Chassis Stock Systems. Assembly consists of sling plate attachment, MAGPUL® PRS2™ butt stock, ERGO grip, and mounting hardware. Converts EBR stocks to ALCS/PMRI (MOD-2) style. Features an adjustable machined butt-plate, steel adjustment shafts, and machined adjustment knobs with positive-locking detents. Stock also includes an adjustable cheek rest and rubber recoil pad. Only available from SAGE or an authorized SAGE resellers/distributors. Includes mounting hardware and
sling plate.
PRODUCT SPECIFICATIONS
*SHOWN WITH OPTIONAL EXTRAS
MODEL PMRI-MR
MATERIAL ALUMINUM
OVERALL LENGTH 4” (10.16 CM)
WEIGHT .1 LBS (.05 KG)
COLOR BLACK
FINISH HARD ANODIZE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
P
MR
I P
IC
AT
IN
NY
R
AIL
989.739.7000 www.sageinternationalltd.com
DETAILS
The PMRI-MR is Picatinny rail
specifically designed for monopod
or sling mounting on MAGPUL®
PRS2™ stock systems.
The PMRI-MR is precision CNC
machined from billet aircraft grade
aluminum and is finished in a hard
anodize.
Only available from SAGE or
authorized SAGE
resellers/distributors.
Includes mounting hardware.
PRODUCT SPECIFICATIONS
*SHOWN WITH OPTIONAL EXTRAS
MODEL PMRI-FR
MATERIAL ALUMINUM
OVERALL LENGTH 4” (10.16 CM)
WEIGHT .1 LBS (.05 KG)
COLOR BLACK
FINISH HARD ANODIZE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EB
R A
CC
ES
SO
RIE
S &
E
QU
IP
ME
NT
M
1/M
14
P
MR
I P
IC
AT
IN
NY
R
AIL
989.739.7000 www.sageinternationalltd.com
DETAILS
The PMRI-FR is Picatinny rail
specifically designed for sling and
accessory mounting on MAGPUL®
PRS2™ stock systems.
The PMRI-FR is precision CNC
machined from billet aircraft grade
aluminum and is finished in a hard
anodize.
Only available from SAGE or
authorized SAGE
resellers/distributors.
Includes mounting hardware.
SHOTGUN STOCKS
ALL VARIANTS
SH
OT
GU
N S
TO
CK
S
AL
L V
AR
IA
NT
S
PRODUCT SPECIFICATIONS
MODEL TS870R
LENGTH OF PULL EXTENDED
14.25” (36.19 CM)
LENGTH OF PULL COLLAPSED
8.25” (20.95 CM)
WEIGHT 2.6 LBS (1.17 KG)
FINISH BLACK NITRIDE
GRIP ERGO® GRIP
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SH
OT
GU
N S
TO
CK
S
8
70
T
EL
ES
CO
PIN
G S
HO
TG
UN
S
TO
CK
989.739.7000 www.sageinternationalltd.com
DETAILS
The TS870R is a telescoping
shotgun stock made for standard
12 gauge Remington® 870
shotguns.
The stock is all steel construction
and features a soft textured
ERGO® grip and 1” soft rubber
recoil pad.
Quickly installs via a replacement
receiver extension and stock bolt.
Only available from SAGE or
authorized SAGE
resellers/distributors.
Includes mounting hardware.
PRODUCT SPECIFICATIONS
MODEL TS880RLW
LENGTH OF PULL EXTENDED
15” (38.1 CM)
LENGTH OF PULL COLLAPSED
9” (22.86 CM)
WEIGHT 1.8 LBS (.82 KG)
FINISH HARD ANODIZE
GRIP ERGO® GRIP
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SH
OT
GU
N S
TO
CK
S
8
70
T
EL
ES
CO
PIN
G S
HO
TG
UN
S
TO
CK
989.739.7000 www.sageinternationalltd.com
DETAILS
The TS880RLW is a lightweight
telescoping shotgun stock made
for standard 12 gauge Remington®
870 shotguns.
The stock is aluminum
construction and features a soft
textured ERGO® grip and 1” soft
rubber recoil pad.
Quickly installs via a replacement
receiver extension and stock bolt.
Only available from SAGE or
authorized SAGE
resellers/distributors.
Includes mounting hardware.
PRODUCT SPECIFICATIONS
*TSAR-1 NOT SHOWN
MODEL TSAR-1 TSAR-2
LENGTH OF PULL EXTENDED 10.75” (27.30 CM)
NO STOCK
14.25” (36.20 CM) MOE® STOCK
LENGTH OF PULL COLLAPSED
11” (27.94 CM)
WEIGHT 1.0 LBS (.45 KG) 1.4 LBS (.64 KG)
FINISH HARD ANODIZE
GRIP ERGO® GRIP
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SH
OT
GU
N S
TO
CK
S
8
70
S
HO
TG
UN
S
TO
CK
989.739.7000 www.sageinternationalltd.com
DETAILS
The TSAR is a collapsible shotgun
stock made for standard 12 gauge
Remington® 870 shotguns.
The stock is aluminum
construction and features a soft
textured ERGO® grip and 1” soft
rubber recoil pad.
Quickly installs via a replacement
receiver extension and stock bolt.
The TSAR-2 features a MAGPUL®
MOE® stock. The TSAR-1 features
a Mil-Spec M4 tube to allow
operators to mount their own butt
stock.
Only available from SAGE or
authorized SAGE
resellers/distributors.
Includes mounting hardware.
PRODUCT SPECIFICATIONS
*TSAM-1 NOT SHOWN
MODEL TSAM-1 TSAM-2
LENGTH OF PULL EXTENDED 11.5” (29.21 CM)
NO STOCK
15” (38.10 CM)
LENGTH OF PULL COLLAPSED
11.5” (29.21 CM)
WEIGHT 1.0 LBS (.45 KG) 1.4 LBS (.64 KG)
FINISH HARD ANODIZE
GRIP ERGO® GRIP
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SH
OT
GU
N S
TO
CK
S
5
00
S
HO
TG
UN
S
TO
CK
989.739.7000 www.sageinternationalltd.com
DETAILS
The TSAM is a collapsible shotgun
stock made for standard 12 gauge
Mossberg® 500 shotguns.
The stock is aluminum
construction and features a soft
textured ERGO® grip and 1” soft
rubber recoil pad.
Quickly installs via a replacement
receiver extension and stock bolt.
The TSAM-2 features a MAGPUL®
MOE® stock. The TSAM-1 features
a Mil-Spec M4 tube to allow
operators to mount their own butt
stock.
Only available from SAGE or
authorized SAGE
resellers/distributors.
Includes mounting hardware.
SHOTGUN ACCESSORIES
ALL VARIANTS
SH
OT
GU
N A
CC
ES
SO
RIE
S
AL
L V
AR
IA
NT
S
PRODUCT SPECIFICATIONS
MODEL MET6/870 MET7/870 MET8/870
CAPACITY 6 ROUNDS 7 ROUNDS 8 ROUNDS
BARREL LENGTH 14.5” 18” 20”
FINISH BLACK NITRIDE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SH
OT
GU
N A
CC
ES
SO
RIE
S
8
70
M
AG
AZ
IN
E E
XT
EN
SIO
N T
UB
E K
IT
S
989.739.7000 www.sageinternationalltd.com
DETAILS
SAGE MET (Magazine Extension Tube) Kits are manufactured for standard frame 12 gauge Remington® 870 shotguns. They are available in three (3) sizes:
Six Shot Capacity
Seven Shot Capacity
Eight Shot Capacity (Includes one round in chamber).
Each kit contains a coupler, spring, magazine tube extension and barrel/magazine tube clamp. Only available from SAGE or authorized SAGE resellers/distributors. Includes mounting hardware.
PRODUCT SPECIFICATIONS
MODEL DESCRIPTION
STBC BATTLECLAMP – BARREL CLAMP
MATERIAL ALUMINUM
WEIGHT 3.3 OZ (0.09 KG)
FINISH HARD ANODIZE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
EN
HA
NC
ED
T
AC
TIC
AL
C
AR
BIN
E C
HA
SS
IS
B
AT
TL
EC
LA
MP
– B
AR
RE
L C
LA
MP
989.739.7000 www.sageinternationalltd.com
DETAILS The Sage BATTLECLAMP Barrel Clamp secures magazine extension tube kits and allows numerous accessories to be mounted easily and quickly. Accepts most 1” diameter weapon lights. The STBC is reversible and features a single point button sling cup and a 1.5" MIL-STD 1913 Picatinny rail for mounting additional accessories. Blackened stainless steel Allen head screws bring the clamp halves together. Fits Remington 870, 1100, 11-87 and Benelli M1, M2, M4, M1014, 12 gauge
shotguns.
PRODUCT SPECIFICATIONS
*SHOWN WITH OPTIONAL EXTRAS
MODEL DESCRIPTION
PSMHG PLAIN STEEL MUZZLE HAND GUARD
SSMHG STAINLESS STEEL MUZZLE HAND GUARD
MHGISL PLAIN STEEL MUZZLE HAND GUARD – LEFT HAND
MHGISR PLAIN STEEL MUZZLE HAND GUARD – RIGHT HAND
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SH
OT
GU
N A
CC
ES
SO
RIE
S
S
HO
TG
UN
M
UZ
ZL
E H
AN
D G
UA
RD
S
989.739.7000 www.sageinternationalltd.com
DETAILS The SAGE MHGISL is a combination Hand Guard and Side Sling for left handed shooters. The SAGE MHGISR is a combination Hand Guard and Side Sling for right handed shooters. The MHGISL and the MHGISR muzzle hand guards are made of plain steel and feature a black nitride finish. Fits 12 gauge Remington® 870, 1100 & 11-87 shotguns. The SAGE PSMHG is a plain steel Muzzle Hand-Guard with a bottom sling loop and a black nitride finish. The SAGE SSMHG is a stainless steel Muzzle Hand-Guard with a bottom sling loop. Fits 12 gauge Remington® 870, 1100 & 11-87 shotguns.
Only available from SAGE or authorized SAGE resellers/distributors.
MHGISR / MSGISL
PSMHG / SSMHG
PRODUCT SPECIFICATIONS
*SHOWN WITH OPTIONAL EXTRAS
MODEL DESCRIPTION
SSR870R FRONT OFFSET SLING ATTACHMENT – RIGHT HAND
SSR870L FRONT OFFSET SLING ATTACHMENT – LEFT HAND
SSM590R FRONT OFFSET SLING ATTACHMENT – RIGHT HAND
SSM590L FRONT OFFSET SLING ATTACHMENT – LEFT HAND
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SH
OT
GU
N A
CC
ES
SO
RIE
S
S
HO
TG
UN
S
LIN
G F
IT
TIN
GS
989.739.7000 www.sageinternationalltd.com
DETAILS
The SSR870R and SSR870L are offset shotgun sling fittings. Fits 12 gauge Remington® 870 shotguns and can be used with a variety of SureFire® forend lights.
The SSM590R and SSM590L are offset shotgun sling fittings. Fits 12 gauge Mossberg® 590 shotguns and can be used with a variety of SureFire® forend lights.
Each model features a 1.25” sling loop. All steel construction and finished in a black nitride. Easy to install and does not require any modifications to the shotgun.
Only available from SAGE or authorized SAGE resellers/distributors.
PRODUCT SPECIFICATIONS
MODEL DESCRIPTION
VFG8P VERTICAL FORE-GRIP - PLAIN
VFG8W VERTICAL FORE-GRIP – W/ TWO (2) PICATINNY RAILS
LENGTH 5.75” (14.60 CM)
WEIGHT .6 LBS (.27 KG)
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SH
OT
GU
N A
CC
ES
SO
RIE
S
S
HO
TG
UN
V
ER
TIC
AL
F
OR
E-G
RIP
S
989.739.7000 www.sageinternationalltd.com
DETAILS
The VFG8P is a plain steel vertical
fore-grip featuring a hollow plastic
grip.
The VFG8W is a steel vertical fore-
grip with dual side Picatinny rails
and a hollow plastic grip. Both
models are designed to fit 12 gauge
Remington® 870 shotguns.
SAGE shotgun vertical fore-grips help increase weapon control and retention. Additionally the SAGE VFG8W allows accessories to be easily mounted via the dual Picatinny rails. No permanent modification to the shotgun is necessary with either model. Easy to install and remove. Only available from SAGE or authorized SAGE resellers/distributors.
VFG8P VFG8W
PRODUCT SPECIFICATIONS
NON-SHROUDED GHOST RING SIGHT KITS
MODEL DESCRIPTION
SGRSK/812NS FITS .817" - .827" BARRELS
SGRSK/828NS FITS .833" - .843" BARRELS
SGRSK/843NS FITS .848" - .858" BARRELS
SGRSK/843MNS FITS .848" - .858" BARRELS (NOTCHED FOR MOSS 590)
SGRSK/860NS FITS .865" - .875" BARRELS
SGRSK/875NS FITS .880" - .890" BARRELS
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SHROUDED GHOST RING SIGHT KITS
MODEL DESCRIPTION
SGRSK/812 FITS .817" - .827" BARRELS
SGRSK/828 FITS .833" - .843" BARRELS
SGRSK/843 FITS .848" - .858" BARRELS
SGRSK/843M FITS .848" - .858" BARRELS (NOTCHED FOR MOSS 590)
SGRSK/860 FITS .865" - .875" BARRELS
SGRSK/875 FITS .880" - .890" BARRELS
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SH
OT
GU
N A
CC
ES
SO
RIE
S
S
HO
TG
UN
G
HO
ST
R
IN
G S
IG
HT
K
IT
S
989.739.7000 www.sageinternationalltd.com
DETAILS SAGE Shrouded and Non-Shrouded Ghost Ring Sight Kits are available in a variety of sizes to accommodate most shotgun barrels. Mounting consists of drilling and tapping three holes, no other modifications are necessary.
All steel construction and features a black nitride finish. Fits barrels with muzzle OD in the .817" to .890" range. Shrouded model protects sight & help with visual alignment No bead is included. Red fiber-optic, green fiber-optic and self powered Tritium is available as an additional item.
Easy to install and remove. Only available from SAGE or authorized SAGE resellers/distributors.
NON-SHROUDED SHROUDED
PRODUCT SPECIFICATIONS
*SHOTGUN & FLASHLIGHT NOT INCLUDED
MODEL DESCRIPTION
FRS1187 FORCE-RS LIGHT MOUNT - ACCEPTS 1” DIAMETER LIGHTS
MATERIAL STEEL
WEIGHT .3 LBS (.14 LBS)
FINISH BLACK NITRIDE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SH
OT
GU
N A
CC
ES
SO
RIE
S
S
HO
TG
UN
L
IG
HT
M
OU
NT
989.739.7000 www.sageinternationalltd.com
DETAILS
The SAGE FRS1187 is a FORCE-RS Light Mount designed to fit 12 gauge Remington® 1100 & 11-87 shotguns. Accepts all 1" diameter flashlights or lasers. Light or laser attaches via heavy duty compression collar clamping system. Machined from steel and finished in durable black nitride. Easy to install and remove. No modifications to the shotgun are required. Only available from SAGE or authorized SAGE resellers/distributors.
M4 & M16 VARIANT
ACCESSORIES
ALL VARIANTS
M4
&
M
16
V
AR
IA
NT
A
CC
ES
SO
RIE
S
AL
L V
AR
IA
NT
S
PRODUCT SPECIFICATIONS
MODEL DESCRIPTION
IPS/MM12 M16 INTERBAR SYSTEM – DIRECT MOUNT FOR 12 GAUGE SHOTGUN. FITS COLT 723, M4, AND 9MM SMG.
IPS/MM12RG M16 INTERBAR SYSTEM – INCLUDES RAIL GRABBER DEVICE. FITS COLT 723, M4, AND 9MM SMG.
MATERIAL ALUMINUM
LENGTH 10.75” (27.30 CM)
WEIGHT IPS/MM12 .8 LBS (.36 KG)
IPS/MM12RG 1.2 LBS (.54 KG)
FINISH HARD ANODIZE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
M4
&
M
16
V
AR
IA
NT
A
CC
ES
SO
RIE
S
M
16
IN
TE
RB
AR
S
YS
TE
MS
989.739.7000 www.sageinternationalltd.com
DETAILS
The IPS/MM12 is an INTERBAR system designed for Colt 723, M4, and 9mm SMG. The IPS bar is drilled to direct mount a 12 gauge shotgun via four mounting screws. Positive lock up on rifle bayonet lug and rifle front hinge pin. Includes INTERBAR, special bottom receiver hinge pin and mounting hardware. The IPS/MM12 is an INTERBAR system designed for Colt 723, M4, and 9mm SMG. The IPS bar mounts a quick opening rail grabber for ease of mounting or releasing the shotgun without removing the IPS Rail. Positive lock up on rifle bayonet lug and rifle front hinge pin. Only available from SAGE or authorized SAGE resellers/distributors.
IPS/MM12 IPS/MM12RG
PRODUCT SPECIFICATIONS
MODEL DESCRIPTION
QDM4PS M4 QUICK DETACHABLE INTEGRATED PLATFORM
MATERIAL ALUMINUM
WEIGHT 1.2 LBS (.54 KG)
LENGTH 10.75” (27.30 KG)
FINISH HARD ANODIZE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
M4
&
M
16
V
AR
IA
NT
A
CC
ES
SO
RIE
S
M
4 Q
UIC
K D
ET
AC
H P
LA
TF
OR
M
989.739.7000 www.sageinternationalltd.com
DETAILS
The QDM4PS is an INTERBAR system designed for Colt 723, M4, and 9mm SMG. The IPS bar mounts a quick opening rail grabber for ease of mounting or releasing the shotgun without removing the IPS Rail. Positive lock up on rifle bayonet lug and rifle front hinge pin. Accommodates breaching shotguns and under-mount grenade launchers. Machined from aluminum and finished with hard anodizing. Includes QD platform system and mounting instructions. Only available from SAGE or authorized SAGE resellers/distributors.
PRODUCT SPECIFICATIONS
*RIFLE NOT INCLUDED
MODEL DESCRIPTION
MHG16 M4 / M16 MUZZLE HAND GUARD
MATERIAL STEEL
WEIGHT .3 LBS (.14 KG)
FINISH BLACK NITRIDE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
M4
&
M
16
V
AR
IA
NT
A
CC
ES
SO
RIE
S
M
4 / M
16
M
UZ
ZL
E H
AN
D G
UA
RD
989.739.7000 www.sageinternationalltd.com
DETAILS
The MHG16 an M4/M16 SMG muzzle hand guard. It is designed to fit the Colt 9MM SMG. It is machined from plain steel and is finished in black nitride. Tested and proven design that requires no necessary rifle modifications for installation. Easily removable and installs in seconds via the rifle bayonet lug. Only available from SAGE or authorized SAGE resellers/distributors.
PRODUCT SPECIFICATIONS
*RIFLE & FLASHLIGHT NOT INCLUDED
MODEL DESCRIPTION
FRSM16S LIGHT MOUNT – FITS COLT M16/M16A2, RUGER MINI-14®
FRSM16G LIGHT MOUNT – FITS COLT M16A2, SMG 9MM
MATERIAL STEEL
FINISH BLACK NITRIDE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
M4
&
M
16
V
AR
IA
NT
A
CC
ES
SO
RIE
S
M
4 / M
16
L
IG
HT
M
OU
NT
989.739.7000 www.sageinternationalltd.com
DETAILS
The FRSM16S and FRSM16G are tactical light mounts designed for a variety of rifle platforms. The FRSM16S fits the Colt M16, M16A2, M4 & Ruger Mini-14®. The FRSM16G fits the Colt M16A2 & 9mm SMG. Designed for easy removal and installation via the rifle bayonet lug. Accepts 1" diameter flashlight or laser. Light or laser attaches via heavy duty compression collar clamping system. Machined from steel and finished in durable black nitride. Only available from SAGE or authorized SAGE resellers/distributors.
SPECIALIZED WEAPON
MOUNTING SYSTEMS
ALL VARIANTS
SP
EC
IA
LIZ
ED
W
EA
PO
N M
OU
NT
IN
G S
YS
TE
MS
AL
L V
AR
IA
NT
S
PRODUCT SPECIFICATIONS
MODEL DESCRIPTION
762NCSM 7.62 NATO CAPABLE SOFT MOUNT
MATERIAL STEEL
WEIGHT 6.2 LBS (2.81 KG)
FINISH BLACK NITRIDE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SP
EC
IA
LIZ
ED
W
EA
PO
N M
OU
NT
IN
G S
YS
TE
MS
7
.6
2M
M N
AT
O C
AP
AB
LE
S
OF
T M
OU
NT
989.739.7000 www.sageinternationalltd.com
DETAILS
The SAGE 762NCSM is a 7.62 NATO capable soft mount that accepts the M240 and M249 machine guns. Machined from steel and finished in durable black nitride. Includes soft mount, pintle and pintle mounting bolt. Only available from SAGE or authorized SAGE resellers/distributors.
PRODUCT SPECIFICATIONS
*762NCSM NOT INCLUDED
MODEL DESCRIPTION
SMABARG ADAPTER BAR – FITS 762NCSM AND ALLOWS MACHINE GUN MOUNTING
MATERIAL ALUMINUM W/ STAINLESS STEEL COMPONENTS
WEIGHT 2.0 LBS (.90 KG)
FINISH HARD ANODIZE & BLACK NITRIDE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SP
EC
IA
LIZ
ED
W
EA
PO
N M
OU
NT
IN
G S
YS
TE
MS
S
PE
CIA
LIZ
ED
A
DA
PT
ER
B
AR
989.739.7000 www.sageinternationalltd.com
DETAILS
The SAGE SMABARG is an adaptor bar that fits all M240 and M249 soft-mounts (762NCSM). Designed for MK14 Mod-O & Mod-1 Rifle, MK 46 & MK 48 Machine Gun. Special gripper allows existing soft-mounts to provide a stable platform for the noted rifle and machine guns. Grips the rifle by its integral Picatinny Rail. No modifications to the rifle are required. Design allows for quick rifle mounting and removal. All springs, pins, and components are stainless steel for added corrosion protection and durability. Only available from SAGE or authorized SAGE resellers/distributors.
PRODUCT SPECIFICATIONS
*762NCSM NOT INCLUDED
MODEL DESCRIPTION
HMABARG EQUILIBRATED ADAPTER BAR
MATERIAL ALUMINUM W/ STAINLESS STEEL COMPONENTS
WEIGHT 1.8 LBS (.81 KG)
FINISH HARD ANODIZE & BLACK NITRIDE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SP
EC
IA
LIZ
ED
W
EA
PO
N M
OU
NT
IN
G S
YS
TE
MS
E
QU
IL
IB
RA
TE
D A
DA
PT
ER
B
AR
989.739.7000 www.sageinternationalltd.com
DETAILS
The SAGE HMABARG is an equilibrated adaptor bar that fits all conventional M240 and M249 machine gun mounts. Designed for MK14 Mod-O & Mod-1 Rifle, MK 46 & MK 48 Machine Gun. Special gripper is spring equilibrated allowing a conventional hard machine gun mount to provide a more stable platform for the noted rifle and machine guns. No modifications to the rifle are required. Design allows for quick rifle mounting and removal. All springs, pins, and components are stainless steel for added corrosion protection and durability. Only available from SAGE or authorized SAGE resellers/distributors.
PRODUCT SPECIFICATIONS
MODEL DESCRIPTION
762RG RAIL GRABBER – LARGE DEVICES
MATERIAL ALUMINUM W/ STAINLESS STEEL COMPONENTS
WEIGHT .5 LBS (.23 KG)
LENGTH 4.87” (12.36 CM)
FINISH HARD ANODIZE & BLACK NITRIDE
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SP
EC
IA
LIZ
ED
W
EA
PO
N M
OU
NT
IN
G S
YS
TE
MS
R
AIL
G
RA
BB
ER
– L
AR
GE
D
EV
IC
ES
989.739.7000 www.sageinternationalltd.com
DETAILS
The SAGE 762RG is a special Picatinny rail grabber that allows versatile mounting solutions with the strength to handle 7.62 NATO recoil. An adjustable gripping surface allows for positive, no slip, Picatinny rail engagement even with oversized or undersized rails. No modifications to the rifle are required. Design allows for quick rifle mounting and removal. All springs, pins, and components are stainless steel for added corrosion protection and durability. Only available from SAGE or authorized SAGE resellers/distributors.
TOP VIEW BOTTOM VIEW
SECURITY PRODUCTS
ALL VARIANTS
SE
CU
RIT
Y P
RO
DU
CT
S
AL
L V
AR
IA
NT
S
PRODUCT SPECIFICATIONS
MODEL DESCRIPTION
VTM028 VEHICLE TIRE MARKER
RCVTM REPLACEMENT CHALK – YELLOW (144 PIECES)
LENGTH 28” (71 CM)
MATERIAL TUBULAR STEEL & PLASTIC
WEIGHT .8 LBS (.36 KG)
FINISH BLACK POWDER COAT
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SE
CU
RIT
Y P
RO
DU
CT
S
V
EH
IC
LE
T
IR
E M
AR
KE
R
989.739.7000 www.sageinternationalltd.com
DETAILS
The SAGE VTM028 is a 28” vehicle tire marker. Used for regulating parking areas by marking vehicle tires. Tubular steel design and includes an ergonomical hand grip. Features a black powder coat finish. Flexible tubular chalk holder for large diameter chalk. Chalk sold as a separate item-144 pieces per box. Only available from SAGE or authorized SAGE resellers/distributors.
PRODUCT SPECIFICATIONS
*NOT ALL MODELS SHOWN
MODEL DESCRIPTION
PIM1300C ADJUSTABLE 26”-43”, 5” CONVEX GLASS
PIM1400C ADJUSTABLE 34”-52”, 8” CONVEX GLASS
PIM1500C ADJUSTABLE 47”-77”, 8” CONVEX GLASS
PIM1600C ADJUSTABLE 47”-77”, ARMREST, 8” CONVEX GLASS
PIM1300AF ADJUSTABLE 26”-43”, 5” FLAT ACRYLIC
PIM1400AF ADJUSTABLE 34”-52”, 8” FLAT ACRYLIC
PIM1500AF ADJUSTABLE 47”-77”, 8” FLAT ACRYLIC
PIM1600AF ADJUSTABLE 47”-77”, ARMREST, 8” FLAT ACRYLIC
PIM1700C ADJUSTABLE 47”-77”, LED LIGHTS, 12” CONVEX
FINISH BLACK POWDER COAT
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SE
CU
RIT
Y P
RO
DU
CT
S
P
RE
MIE
R IN
SP
EC
TIO
N M
IR
RO
RS
989.739.7000 www.sageinternationalltd.com
DETAILS
SAGE manufactures a variety of Premier Inspection Mirrors to accommodate most security and inspection needs. Most PIM models feature Convex Glass or Flat Acrylic mirrors and are able to fold for compact storage and transport. Lengths vary from 26” to 77” and all models will fully telescope via the included adjustable twist lock. All models feature a non-slip rubber grip handle. Only available from SAGE or authorized SAGE resellers/distributors.
PRODUCT SPECIFICATIONS
MODEL PIM1700
DIAMETER 12” (30.48cm) CONVEX
LENGTH COLLAPSED 47” (119.38cm)
LENGTH EXTENDED 80” (203.20cm)
MIRROR OVER GROUND HEIGHT
CASTERS ONLY 3.33” (84.6mm)
WITH ¼” RISER KIT 3.58” (90.9mm)
WITH ½” RISER KIT 3.83” (97.3mm)
WITH ¾” RISER KIT 4.08” (103.6mm)
CHASSIS GROUND CLEARANCE HEIGHT
CASTERS ONLY .160” (4.1mm)
WITH ¼” RISER KIT .410” (10.4mm)
WITH ½” RISER KIT .660” (16.8mm)
WITH ¾” RISER KIT .910” (23.1mm)
BATTERIES NOT INCLUDED (TWO 9-VOLT REQUIRED)
LIGHTS TWO (2) LED LIGHTBARS
FINISH BLACK POWDER COAT
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SE
CU
RIT
Y P
RO
DU
CT
S
P
IM
17
00
P
RE
MIE
R IN
SP
EC
TIO
N M
IR
RO
R
989.739.7000 www.sageinternationalltd.com
DETAILS The Sage PIM1700 Premier Inspection Mirror is a 12” convex acrylic security mirror that features an adjustable telescoping handle from 47” to 80” to accommodate most security and inspection needs. The PIM1700 features three (3) smooth casters and multiple riser kit combinations so that chassis ground clearance height can be easily adjusted to accommodate varying surface conditions. The dual LED light bars are illuminated by a waterproof switch located on the underside of the grip. The dual LED lights are angled specifically to give the operator a clear and bright presentation during the inspection process. Features a non-slip rubber grip handle and durable black powder coat finish. Only available from Sage or authorized Sage distributors.
PRODUCT SPECIFICATIONS
*NOT ALL MODELS SHOWN
MODEL DESCRIPTION
IMFL/12 FIXED LENGTH, 12”, 5” CONVEX GLASS MIRROR
IMFL/30 FIXED LENGTH 30”, 5” CONVEX GLASS MIRROR
IMFL/40 FIXED LENGTH 40”, 5” CONVEX GLASS MIRROR
IMTAL/8 TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 8” CONVEX GLASS MIRROR, WITH WHEEL KIT & WITH FLASHLIGHT HOLDER
IMTAL/5 TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 5” CONVEX GLASS MIRROR, WITHOUT WHEEL KIT & WITH FLASHLIGHT HOLDER
IMHHPM HAND HELD PERSONAL MIRROR 3” X 5”
IMFL/12(AF) FIXED LENGTH, 12”, 5” FLAT ACRYLIC MIRROR
IMFL/30(AF) FIXED LENGTH, 30”, 5” FLAT ACRYLIC MIRROR
IMFL/40(AF) FIXED LENGTH, 40”, 5” FLAT ACRYLIC MIRROR
IMTAL/8(AF) TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 8” FLAT ACRYLIC MIRROR, WITH WHEEL KIT & WITH FLASHLIGHT HOLDER
IMTAL/5(AF) TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 5” FLAT ACRYLIC MIRROR WITHOUT WHEEL KIT & WITH FLASHLIGHT HOLDER
FINISH BLACK POWDER COAT
WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP
All Specifications are Averages and Subject to Change
SE
CU
RIT
Y P
RO
DU
CT
S
S
TA
ND
AR
D IN
SP
EC
TIO
N M
IR
RO
RS
989.739.7000 www.sageinternationalltd.com
DETAILS
SAGE manufactures a variety of Standard Inspection Mirrors to accommodate most security and inspection needs. Most SIM models feature Convex Glass or Flat Acrylic mirrors and many are offered with integral flashlight holders. Lengths vary from 12” to 60”. Certain models are offered with telescoping capabilities. Only available from SAGE or authorized SAGE resellers/distributors.
EBR REPLACEMENT PARTS
ALL VARIANTS
EB
R R
EP
LA
CE
ME
NT
P
AR
TS
AL
L V
AR
IA
NT
S
PRODUCT SPECIFICATIONS
SCHM PART # DESCRIPTION
1 90900 STOCK CHASSIS
2 90901 TOP COVER, STANDARD BARREL
87 90987 TOP COVER, MEDIUM BARREL
88 90988 TOP COVER, MEDIUM BARREL, ACCOMMODATING SEI MOUNT
90 90990 TOP COVER, STANDARD BARREL, ACCOMMODATING SEI MOUNT
3 90903 BUTT STOCK STRUTT ASSEMBLY
4 90904 BUTT STOCK MAIN BODY ASSEMBLY*
5 M14ERGO ERGO GRIP
7 90907 FORE-GRIP (KYDEX), SINGLE UNIT, BLACK OR TAN OR 2-PIECE UNIT
8 90908 CHEEK REST
9 90909 ELEVATOR-CHEEK REST SUPPORT
10 90910 RECOIL PAD (PACHMAYR)
11 90911 BUTT PLATE INTERMEDIATE SPACER
12 90912 ELEVATOR CHEEK REST LOCK WRENCH
13 90913 CHASSIS SLING ATTACHMENT PLATE
14 90914 CHASSIS OPERATING ROD GUIDE
15 90915 BOTTOM RAIL
16 90916 LEFT SIDE RAIL
17 90917 RIGHT SIDE RAIL
18 90918 STOCK LOCK BAR RETURN SPRING
19 90919 PISTOL GRIP MOUNTING SCREW
20 90920 PISTOL GRIP MOUNTING SCREW LOCK WASHER
21 90921 PISTOL GRIP MOUNTING SCREW FLAT WASHER
22 90922 CHEEK REST MOUNTING SCREW (2 EACH)
23 90923 RECOIL PAD MOUNTING SCREW
24 90924 ELEVATOR LOCK SCREW
25 90925 ELEVATOR LOCK NUT
27 90927 BUTT STOCK MAIN BODY SECONDARY MOUNTING SCREW
28 90928 BUTT STOCK MAIN BODY SECONDARY MOUNTING SCREW FLAT WASHER
29 90929 BUTT STOCK MAIN BODY PRIMARY MOUNTING SCREW
30 90930 BUTT STOCK MAIN BODY PRIMARY MOUNTING SCREW FLAT WASHER
31 90931 OPERATING ROD GUIDE SCREW (3 EA)
32 90932 TOP COVER ATTACHMENT SCREWS
33 90933 BOTTOM RAIL ATTACHMENT SCREW (4 EA)
SCHM PART # DESCRIPTION
34 90934 SIDE RAIL ATTACHMENT SCREW (2 EA)
35 90935 FRONT SLING ATTACHMENT
36 90936 FRONT SLING ATTACHMENT BACK PLATE
37 90937 FRONT SLING ATTACHMENT SCREW (2 EA)
38 90938 BARREL TENSION SCREW
39 90939 BARREL TENSION LOCK SCREW
40 90940 FORE-GRIP (KYDEX) ATTACHMENT SCREW
26 90926 FORE-GRIP (KYDEX) ATTACHMENT SCREW FOR 2- PIECE UNIT
41 90941 BUTT STOCK BUTT PLATE WELDMENT ASSEMBLY
42 90942 BUTT STOCK STRUTT ROD (2 EA)
43 90943 BUTT STOCK STRUTT MOUNTING, BUTT STOCK STRUTT STOP SCREW (6 EA)
44 90944 BUTT STOCK SLING ATTACHMENT WIRE
45 90945 COLLAPSIBLE BUTT STOCK MAIN BODY WELDMENT
46 90946 LOCK BAR
47 90947 LOCK BAR ACTUATING BOLT
48 90948 LOCK BAR THUMB RELEASE LEVER
49 90949 LOCK BAR RETURN SPRING RETAINING CUP
50 90950 LOCK BAR THUMB RELEASE LEVER TENSION SPRING
54 90954 ELEVATOR CHEEK REST SUPPORT
55 90955 ELEVATOR CHEEK REST PLUNGER STOP SCREW
56 90958 CRUSH WASHER, SPACER FRONT BAND
EB
R R
EP
LA
CE
ME
NT
P
AR
TS
M
14
AL
CS
E
NH
AN
CE
D B
AT
TL
E R
IF
LE
989.739.7000 www.sageinternationalltd.com
Current production replacement parts for the M14ALCS
EBR are available. Please use the schematic above to
locate replacement part number.
Please Note: Not all SAGE International, Ltd. products
are available in all areas of the United States and
Canada.
Top Related