ENHANCED BATTLE RIFLE - Sage International, Ltd · other colors only through licensed T S M...

ENHANCED BATTLE RIFLE

CHASSIS SYSTEM

ALL VARIANTS

EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M

1A

-M

14

, M

1 G

AR

AN

D, M

IN

I-1

4®

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD MODEL

MODEL M14ALCS

OVERALL LENGTH COLLAPSED

27.5” (69.85 CM)

OVERALL LENGTH EXTENDED

33.5” (85.10 CM)

WEIGHT 5.1 LBS (2.3 KG)

LENGTH OF PULL COLLAPSED

9” (22.85 CM)

LENGTH OF PULL EXTENDED

15” (38.10 CM)

FINISH MIL-SPEC HARD ANODIZE

GRIP ERGO® GRIP

ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP

All Specifications are Averages and Subject to Change

EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M

1/M

14

E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M

989.739.7000 www.sageinternationalltd.com

[email protected]

DETAILS The M14ALCS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS is a drop-in chassis and features a six position telescoping stock and an adjustable polymer cheek rest with two inches of vertical adjustment. Additionally the chassis includes five Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell, and a soft one inch recoil pad. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.

* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.

mailto:[email protected]?subject=Sage%20Less%20Lethal


MODEL M14ALCS/CV


N/A - NO BUTT STOCK INCLUDED

OVERALL LENGTH 28” (71.12 CM)







GRIP TANGODOWN® GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M

1/M

14

E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M14ALCS/CV Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS/CV is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a TangoDown® BATTLEGRIP®. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.




MODEL M14ALCS/CVFS


N/A – BUTT STOCK DOES NOT COLLAPSE

OVERALL LENGTH 33.5” (85.10 CM)





15” (38.10 CM)


GRIP INTEGRAL SYNTHETIC GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M1

/M

14

E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M14ALCS/CVFS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS/CVFS is a drop-in chassis and features an all-weather fiberglass reinforced synthetic monte-carlo butt stock with an integral grip and rubber recoil pad. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.





MODEL M14ALCS/CV16FS








15” (38.10 CM)


GRIP ERGO® GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M

1/M

14

E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M14ALCS/CV16FS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS/CV16FS is a drop-in chassis and features an all-weather, non-adjustable, synthetic M16 butt stock. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.





MODEL M14ALCS/PMRI


32.75” (83.19 CM)


34.25” (87.00 CM)



13” (33.00 CM)


14.5” (36.83 CM)


GRIP ERGO® GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M

1/M

14

E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M14ALCS/PMRI Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS/PMRI is a drop-in chassis and features an adjustable MAGPUL® PRS2® butt stock. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.




*SHOWN AS STANDARD HEAVY WEIGHT MODEL

MODEL M14ALCS-HB


27.5” (69.85 CM)


33.5” (85.10 CM)



9” (22.85 CM)


15” (38.10 CM)


GRIP ERGO® GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M1

/M

14

E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M14ALCS-HB Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with heavy weight barrels only. The M14ALCS-HB is a drop-in chassis and features a six position telescoping stock and an adjustable polymer cheek rest with two inches of vertical adjustment. Additionally the chassis includes five Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell, and a soft one inch recoil pad. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.





MODEL M14ALCS/CV-HB




28” (71.12 CM)











EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M

1/M

14

E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M14ALCS/CV-HB Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with heavy weight barrels only. The M14ALCS/CV-HB is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a TangoDown® BATTLEGRIP®. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.





MODEL M14ALCS/CVFS-HB




33.5” (85.10 CM)





15” (38.10 CM)






EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M

1/M

14

E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M14ALCS/CVFS-HB Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with heavy weight barrels only. The M14ALCS/CVFS-HB is a drop-in chassis and features an all-weather fiberglass reinforced synthetic monte-carlo butt stock with an integral grip and rubber recoil pad. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.




*SHOWN AS STANDARD HEAVY BARREL MODEL

MODEL M14ALCS/PMRI-HB


32.75” (83.19 CM)


34.25” (87.00 CM)



13” (33.00 CM)


14.5” (36.83 CM)


GRIP ERGO® GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M1

/M

14

E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M14ALCS/PMRI-HB Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with heavy weight barrels only. The M14ALCS/PMRI-HB is a drop-in chassis and features an adjustable MAGPUL® PRS2® butt stock. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.





MODEL M1GALCS


33.25” (84.45 CM)


39.50 (100.33 CM)



9” (22.85 CM)


15” (38.10 CM)


GRIP ERGO® GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M1

G

AR

AN

D E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M1GALCS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Garand rifles with standard length barrels. The M1GALCS is a drop-in chassis and features a six position telescoping stock and an adjustable polymer cheek rest with two inches of vertical adjustment. Additionally the chassis includes five Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell, and a soft one inch recoil pad. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.

* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing.




MODEL M1GALCS/CV




34.25” (87.00 CM)











EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M1

G

AR

AN

D E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M1GALCS/CV Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Garand rifles with standard length barrels. The M1GALCS/CV is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a TangoDown® BATTLEGRIP®. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.





MODEL M1GALCS/CVFS



OVERALL LENGTH 39.50 (100.33 CM)





15” (38.10 CM)






EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M

1 G

AR

AN

D E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M1GALCS/CVFS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Garand rifles with standard length barrels. The M1GALCS/CVFS is a drop-in chassis and features an all-weather fiberglass reinforced synthetic monte-carlo butt stock with an integral grip and rubber recoil pad. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in a black factory direct and in other colors only through licensed SAGE resellers.





MODEL M1GALCS/CV16FS




39.50 (100.33 CM)





15” (38.10 CM)


GRIP ERGO® GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M1

G

AR

AN

D E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M1GALCS/CV16FS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Garand rifles with standard length barrels. The M1GALCS/CV16FS is a drop-in chassis and features an all-weather, non-adjustable, synthetic M16 butt stock. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors only through licensed SAGE resellers.





MODEL M1GALCS/PMRI


36.75” (93.35 CM)


38.25” (97.16 CM)



13” (33.00 CM)


14.5” (36.83 CM)


GRIP ERGO® GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M1

G

AR

AN

D E

NH

AN

CE

D B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M1GALCS/PMRI Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Garand rifles with standard length barrels. The M1GALCS/PMRI is a drop-in chassis and features an adjustable MAGPUL® PRS2® butt stock. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in a black factory direct and in other colors only through licensed SAGE resellers.




MODEL MINIALCS/CV










GRIP ERGO® GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

M

IN

I-1

4®

C

HA

SS

IS

S

TO

CK

S

YS

TE

M


[email protected]

DETAILS The MINIALCS/CV Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Ruger Mini-14® Autoloading Rifles. The MINIALCS/CV is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a soft ERGO® Grip. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors/variations only through licensed SAGE resellers.

* Not compatible with the Mini-30®, or the 180 series of the Mini-14®. Mini-14® is a registered trademark of Sturm, Ruger & Co.



MODEL MINIALCS/CVFS




30.5” (77.5 CM)





15” (38.10 CM)


GRIP ERGO® GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

MIN

I-1

4®

C

HA

SS

IS

S

TO

CK

S

YS

TE

M


[email protected]

DETAILS The MINIALCS/CVFS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Ruger Mini-14® Autoloading Rifles. The MINIALCS/CVFS is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a soft ERGO® Grip. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors/variations only through licensed SAGE resellers.




MODEL MINIALCS/CV16FS




30.5” (77.5 CM)





15” (38.10 CM)


GRIP ERGO® GRIP




EN

HA

NC

ED

B

AT

TL

E R

IF

LE

C

HA

SS

IS

S

YS

TE

MS

MIN

I-1

4®

C

HA

SS

IS

S

TO

CK

S

YS

TE

M


[email protected]

DETAILS The MINIALCS/CV16FS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Ruger Mini-14® Autoloading Rifles. The MINIALCS/CV16FS is a drop-in chassis and features an all-weather, non-adjustable, synthetic M16 butt stock and a soft ERGO® Grip. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors/variations only through licensed SAGE resellers.




* SHOWN WITH OPTIONAL EXTRAS, RIFLE NOT INCLUDED

MODEL M1CALCS/CV


N/A – NO BUTT STOCK INCLUDED








GRIP ERGO® GRIP




EN

HA

NC

ED

T

AC

TIC

AL

C

AR

BIN

E C

HA

SS

IS

M

1 C

AR

BIN

E C

HA

SS

IS

S

YS

TE

M


[email protected]

DETAILS The M1CALCS/CV Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1 Carbine Autoloading Rifles. The M1CALCS/CV is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a soft ERGO® Grip. Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, dual push button rear sling studs, and 360° ventilation cuts to help dissipate heat. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also eliminate the need for additional bedding. Available in black factory direct and in other colors/variations only through licensed SAGE resellers.



* SHOWN WITH OPTIONAL EXTRAS, RIFLE NOT INCLUDED

MODEL SKSCS/CV










GRIP ERGO® GRIP




EN

HA

NC

ED

S

KS

C

HA

SS

IS

S

KS

C

HA

SS

IS

S

TO

CK

S

YS

TE

M


[email protected]

DETAILS The SKSCS/CV Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits all factory original SKS rifles. The SKSCS/CV is a drop-in chassis and features a Mil-Spec five position M4 receiver extension tube and a soft ERGO® Grip. Ventilation cuts in the chassis and hand-guard help to quickly dissipate heat. Option tri-rail kit is available for quickly mounting accessories. Rigidity of the chassis increases accuracy and reliability. Eliminates the need for additional bedding. Available in black factory direct and in other colors/variations only through licensed SAGE resellers.


EBR ACCESSORIES

& EQUIPMENT

ALL VARIANTS

EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT


*SHOWN WITH OPTIONAL EXTRAS – RIFLE & CHASSIS NOT INCLUDED

MODEL M14SCSB

RAIL LENGTH 1.00” (2.54 CM)


OVERALL HEIGHT .45” (1.13 CM)

WEIGHT .1 LBS (.05 KG)

FINISH BLACK NITRIDE

ACCESSORIES NOT APPLICABLE



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

S

TR

IP

PE

R C

LIP

SIG

HT

B

AS

E


[email protected]

DETAILS The M14SCSB (Stripper Clip Sight Base) is a 1913 Picatinny Rail insert specifically designed for use on Mil-Spec M1/M14 rifles that are installed in a SAGE M14 EBR Chassis Stock Systems. The M14SCSB is precision machined from ordnance grade steel and replaces the existing factory stripper clip guide. The base permits in-line mounting of scoped optics and accessories. The M14SCSB shape also allows clear through access to the ejection port. Includes a stainless steel set screw and installation does not require any permanent modifications to the rifle or sight base. The SAGE M14SCSB is NOT designed to align with other NON-SAGE chassis stock systems. Fitting SAGE M14SCSB to non Mil-Spec/Commercial rifles may require

additional gunsmithing.



MODEL M14DCSB

RAIL LENGTH 6.75” (17.15 CM)








EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

D

ET

AC

HA

BL

E C

AN

TIL

EV

ER

ED

S

IG

HT

B

AS

E


[email protected]

DETAILS The M14DCSB (Detachable Cantilevered Sight Base) is a precision CNC machined, aluminum removable 1913 Picatinny Rail sight base. Fits all SAGE M14 EBR Chassis Stock Systems. The M14DCSB completely bridges the M14 action back to the rear sight and is fully adjustable for oversized or undersized rails. It features a positive cam locking mechanism that allows rail surfaces to be engaged by flat non-scuffing pads. Additionally the sight base is fully supported on both ends, providing superior rigidity and reliable re-zeroing of optics. Includes an all steel construction stripper clip insert with a stainless steel set screw and a stainless steel base adjustment screw to stop vertical and lateral shifting. M14DCSB installation requires no modifications to the rifle or sight base. Available in black factory direct and in other colors only through licensed SAGE resellers.



MODEL M14VFG

MATERIAL HARD PLASTIC

OVERALL WIDTH 1.25” (3.18 CM) AT WIDEST POINT

OVERALL HEIGHT 4.5” (11.43 CM)


COLOR BLACK



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

V

ER

TIC

AL

F

OR

E-G

RIP


[email protected]

DETAILS The M14VFG (Vertical Fore-Grip) is specifically designed for use on M1/M14, M1 GARAND, & MINI-14/30® SAGE EBR Chassis Stock Systems. The M14VFG attaches to the underside of an EBR Stock via a knurled thumb-type screw and is secured by an integral guide pin. Constructed using the highest quality materials, the M14VFG is lightweight and extremely durable. The M14VFG provides additional control during rapid fire and can be removed easily and quickly by adjusting the threaded core. Not designed to be used with other manufacturers chassis systems or

stocks.



*DOES NOT INCLUDE RIFLE OR CHASSIS

MODEL M14APRS

MATERIAL ALUMINUM



WEIGHT .8 OZ (.02 KG)

FINISH HARD ANODIZE



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

A

DA

PT

ER

P

IC

AT

IN

NY

R

AIL

S

EC

TIO

N


[email protected]

DETAILS The M14APRS (Adapter Picatinny Rail Section) is specifically designed for use on M1/M14, M1 GARAND, & MINI-14/30® SAGE EBR Chassis Stock Systems. The M14APRS attaches to the underside of an EBR Stock via two screws and facilitates the mounting of aftermarket vertical fore-grips without removing the protective Kydex forearm.

Precision machined from aircraft grade aluminum and finished with Mil-Spec hard anodizing. The M14APRS is also movable forward and aft four (4) positions to allow for further range of fore-grip placement. Fits same hole pattern as the SAGE M14VFG. Includes two (2) mounting screws.



MODEL M14ERGO

MATERIAL TEXTURED RUBBER AND PLASTIC




COLOR BLACK OR TAN (PLEASE SPECIFY)



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

E

RG

O G

RIP


[email protected]

DETAILS The M14ERGO is a soft textured pistol

grip specifically designed for use on

MOD-0 style M1/M14 & M1 GARAND

SAGE EBR Chassis Stock Systems.

Manufactured to SAGE EBR

specifications for the proper function

of the MOD-0 telescoping stock, the

M14ERGO will not function with other

manufacturers chassis systems or

stocks.

The M14ERGO replaces the old style

EBR hard plastic grip. Features

ergonomically correct finger grooves

and is virtually impervious to

oils/solvents.

Textured finish offer operators better control and features a bottom storage with tethered rubber plug. Ambidextrous design. Not designed for use with other manufacturers chassis systems or stocks. Only available from SAGE or authorized

SAGE resellers/distributors.



MODEL M14FACC

MATERIAL ALUMINUM


OVERALL HEIGHT .65” (1.65 CM) AT TALLEST POINT

WEIGHT .2 OZ (.005 KG)

COLOR BLACK

FINISH HARD ANODIZE



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

F

UL

L A

UT

O C

UT

-O

UT

C

OV

ER


[email protected]

DETAILS

The M14FACC (Full Auto Cut-Out

Cover) is specifically designed to

fill the full auto selector clearance

cut on M1/M14 SAGE EBR Chassis

Stock Systems.

The M14FACC is precision CNC

machined from billet aircraft grade

aluminum and is finished in a hard

anodize.

Prevents dirt & debris from

entering action and features two

upper guide pins to prevent

shifting while installed in the

chassis system.

Manufactured to SAGE EBR

specifications and is not

compatible with other M1/M14

stock systems.

Only available from SAGE or

authorized SAGE

resellers/distributors.



MODEL M14BEK

MATERIAL ALUMINUM

OVERALL WIDTH 1” (2.54 CM)



COLOR BLACK

FINISH HARD ANODIZE



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

B

UT

TS

TO

CK

E

XT

EN

SIO

N K

IT


[email protected]

DETAILS

The M14BEK (Buttstock Extension

Kit) is a one inch (1") buttstock

extension kit that is specifically

designed for use on MOD-0 style

M1/M14 & M1 GARAND SAGE EBR

Chassis Stock Systems.

The M14BEK is precision CNC



anodize.

Replaces the factory buttplate

intermediate spacer (Part #90911)

and increases the length of pull by

one inch (1”). Does not interfere

with adjustable cheek rest

function.


authorized SAGE


Includes mounting hardware.



MODEL M14VABEK/ALCS

MATERIAL ALUMINUM




COLOR BLACK

FINISH HARD ANODIZE



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

V

ER

TIC

AL

A

DJ

US

TA

BL

E B

UT

TS

TO

CK

E

XT

EN

SIO

N K

IT


[email protected]

DETAILS The M14VABEK/ALCS (Vertical Adjustable Buttstock Extension Kit) is a 1.5" buttstock extension kit that is specifically designed for use on MOD-0 style M1/M14 & M1 GARAND SAGE EBR Chassis Stock Systems. The M14VABEK/ALCS is precision CNC machined from billet aircraft grade aluminum and is finished in a hard anodize. Replaces the factory buttplate intermediate spacer (Part #90911) and increases the length of pull by 1.5”. Does not interfere with adjustable cheek rest function. Also allows for 1.5” of vertical buttplate adjustment. Only available from SAGE or authorized SAGE resellers/distributors.




*RIFLE AND CHASSIS NOT INCLUDED

MODEL M14VABEK/PMRI

MATERIAL ALUMINUM




COLOR BLACK

FINISH HARD ANODIZE



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

V

ER

TIC

AL

A

DJ

US

TA

BL

E B

UT

TS

TO

CK

E

XT

EN

SIO

N K

IT


[email protected]

DETAILS

The M14VABEK/PMRI (Vertical Adjustable Buttstock Extension Kit) is a 1.5" buttstock extension kit that is specifically designed for use on PMRI style M1/M14 & M1 GARAND SAGE EBR Chassis Stock Systems. The M14VABEK/PMRI is precision CNC machined from billet aircraft grade aluminum and is finished in a hard anodize. Replaces the factory buttplate intermediate spacer (Part #90911) and increases the length of pull by 1.5”. Does not interfere with adjustable cheek rest function. Also allows for 1.5” of vertical buttplate adjustment. Only available from SAGE or authorized SAGE resellers/distributors.




MODEL M14ALCS-BS

MATERIAL ALUMINUM & STEEL


15” (38.1 CM)


9” (22.86 CM)


COLOR BLACK (ADDITIONAL COLORS VARY)

FINISH HARD ANODIZE & BLACK NITRIDE

GRIP ERGO® GRIP



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

T

EL

ES

CO

PIN

G B

UT

TS

TO

CK

(M

OD

-O

)


[email protected]

DETAILS

The M14ALCS-BS is a complete telescoping buttstock conversion kit that is specifically designed for use on M1/M14 & M1 GARAND SAGE EBR Chassis Stock Systems. Converts EBR stocks to ALCS (MOD-0) style. Telescoping design provides six (6) length positions. Adjustable cheek rest has two inches (2") of travel in one quarter inch (.25") increments. Features a self stowing tensioning wrench to securely lock cheek rest into position. Aluminum parts are Mil-Spec hard anodize & all steel components are black nitride finished. Only available from SAGE or authorized SAGE resellers/distributors. Includes mounting hardware and

sling plate.



MODEL M14ALCS/CVFS-BS

MATERIAL SYNTHETIC PLASTIC


OVERALL HEIGHT 5” (12.7 CM) AT TALLEST POINT

WEIGHT 1.4 LBS (.63 KG)

COLOR BLACK

GRIP INTEGRAL SEMI-PISTOL GRIP



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

F

IX

ED

S

YN

TH

ET

IC

B

UT

TS

TO

CK


[email protected]

DETAILS

The M14ALCS/CVFS-BS is a

synthetic fixed buttstock

conversion kit that is specifically

designed for use on M1/M14 & M1

GARAND SAGE EBR Chassis

Stock Systems.

Converts EBR stocks to

ALCS/CVFS (fixed stock) style. All

weather fiberglass reinforced

synthetic stock features scratch-

resistant finish that resists wear.

Features a Monte-Carlo style cheek

rest and checkered integral semi-

pistol grip. Includes 1" rubber

recoil pad & double front sling

loop plate.

Only available from SAGE or an

authorized SAGE


Includes mounting hardware and

sling plate.



MODEL M14ALCS/PMRI-BS

MATERIAL ALUMINUM

OVERALL LENGTH 13” (33.02 CM) COLLAPSED

14.5” (36.83 CM) EXTENDED

OVERALL HEIGHT 6.25” (15.87 CM) DOWN 8” (20.32 CM) UP


COLOR BLACK

GRIP INTEGRAL SEMI-PISTOL GRIP



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

P

MR

I B

UT

TS

TO

CK


[email protected]

DETAILS The M14ALCS/PMRI-BS is MAGPUL® PRS2™ butt stock conversion kit that is specifically designed for use on M1/M14 & M1 GARAND SAGE EBR Chassis Stock Systems. Assembly consists of sling plate attachment, MAGPUL® PRS2™ butt stock, ERGO grip, and mounting hardware. Converts EBR stocks to ALCS/PMRI (MOD-2) style. Features an adjustable machined butt-plate, steel adjustment shafts, and machined adjustment knobs with positive-locking detents. Stock also includes an adjustable cheek rest and rubber recoil pad. Only available from SAGE or an authorized SAGE resellers/distributors. Includes mounting hardware and

sling plate.



*SHOWN WITH OPTIONAL EXTRAS

MODEL PMRI-MR

MATERIAL ALUMINUM



COLOR BLACK

FINISH HARD ANODIZE



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

P

MR

I P

IC

AT

IN

NY

R

AIL


[email protected]

DETAILS

The PMRI-MR is Picatinny rail

specifically designed for monopod

or sling mounting on MAGPUL®

PRS2™ stock systems.

The PMRI-MR is precision CNC



anodize.


authorized SAGE






MODEL PMRI-FR

MATERIAL ALUMINUM



COLOR BLACK

FINISH HARD ANODIZE



EB

R A

CC

ES

SO

RIE

S &

E

QU

IP

ME

NT

M

1/M

14

P

MR

I P

IC

AT

IN

NY

R

AIL


[email protected]

DETAILS

The PMRI-FR is Picatinny rail

specifically designed for sling and

accessory mounting on MAGPUL®

PRS2™ stock systems.

The PMRI-FR is precision CNC



anodize.


authorized SAGE




SHOTGUN STOCKS

ALL VARIANTS

SH

OT

GU

N S

TO

CK

S

AL

L V

AR

IA

NT

S


MODEL TS870R


14.25” (36.19 CM)


8.25” (20.95 CM)



GRIP ERGO® GRIP



SH

OT

GU

N S

TO

CK

S

8

70

T

EL

ES

CO

PIN

G S

HO

TG

UN

S

TO

CK


[email protected]

DETAILS

The TS870R is a telescoping

shotgun stock made for standard

12 gauge Remington® 870

shotguns.

The stock is all steel construction

and features a soft textured

ERGO® grip and 1” soft rubber

recoil pad.

Quickly installs via a replacement

receiver extension and stock bolt.


authorized SAGE





MODEL TS880RLW


15” (38.1 CM)


9” (22.86 CM)


FINISH HARD ANODIZE

GRIP ERGO® GRIP



SH

OT

GU

N S

TO

CK

S

8

70

T

EL

ES

CO

PIN

G S

HO

TG

UN

S

TO

CK


[email protected]

DETAILS

The TS880RLW is a lightweight

telescoping shotgun stock made

for standard 12 gauge Remington®

870 shotguns.

The stock is aluminum

construction and features a soft

textured ERGO® grip and 1” soft

rubber recoil pad.




authorized SAGE





*TSAR-1 NOT SHOWN

MODEL TSAR-1 TSAR-2

LENGTH OF PULL EXTENDED 10.75” (27.30 CM)

NO STOCK

14.25” (36.20 CM) MOE® STOCK


11” (27.94 CM)

WEIGHT 1.0 LBS (.45 KG) 1.4 LBS (.64 KG)

FINISH HARD ANODIZE

GRIP ERGO® GRIP



SH

OT

GU

N S

TO

CK

S

8

70

S

HO

TG

UN

S

TO

CK


[email protected]

DETAILS

The TSAR is a collapsible shotgun

stock made for standard 12 gauge

Remington® 870 shotguns.




rubber recoil pad.



The TSAR-2 features a MAGPUL®

MOE® stock. The TSAR-1 features

a Mil-Spec M4 tube to allow

operators to mount their own butt

stock.


authorized SAGE





*TSAM-1 NOT SHOWN

MODEL TSAM-1 TSAM-2

LENGTH OF PULL EXTENDED 11.5” (29.21 CM)

NO STOCK

15” (38.10 CM)


11.5” (29.21 CM)

WEIGHT 1.0 LBS (.45 KG) 1.4 LBS (.64 KG)

FINISH HARD ANODIZE

GRIP ERGO® GRIP



SH

OT

GU

N S

TO

CK

S

5

00

S

HO

TG

UN

S

TO

CK


[email protected]

DETAILS

The TSAM is a collapsible shotgun

stock made for standard 12 gauge

Mossberg® 500 shotguns.




rubber recoil pad.



The TSAM-2 features a MAGPUL®

MOE® stock. The TSAM-1 features

a Mil-Spec M4 tube to allow

operators to mount their own butt

stock.


authorized SAGE




SHOTGUN ACCESSORIES

ALL VARIANTS

SH

OT

GU

N A

CC

ES

SO

RIE

S

AL

L V

AR

IA

NT

S


MODEL MET6/870 MET7/870 MET8/870

CAPACITY 6 ROUNDS 7 ROUNDS 8 ROUNDS

BARREL LENGTH 14.5” 18” 20”




SH

OT

GU

N A

CC

ES

SO

RIE

S

8

70

M

AG

AZ

IN

E E

XT

EN

SIO

N T

UB

E K

IT

S


[email protected]

DETAILS

SAGE MET (Magazine Extension Tube) Kits are manufactured for standard frame 12 gauge Remington® 870 shotguns. They are available in three (3) sizes:

Six Shot Capacity

Seven Shot Capacity

Eight Shot Capacity (Includes one round in chamber).

Each kit contains a coupler, spring, magazine tube extension and barrel/magazine tube clamp. Only available from SAGE or authorized SAGE resellers/distributors. Includes mounting hardware.



MODEL DESCRIPTION

STBC BATTLECLAMP – BARREL CLAMP

MATERIAL ALUMINUM

WEIGHT 3.3 OZ (0.09 KG)

FINISH HARD ANODIZE



EN

HA

NC

ED

T

AC

TIC

AL

C

AR

BIN

E C

HA

SS

IS

B

AT

TL

EC

LA

MP

– B

AR

RE

L C

LA

MP


[email protected]

DETAILS The Sage BATTLECLAMP Barrel Clamp secures magazine extension tube kits and allows numerous accessories to be mounted easily and quickly. Accepts most 1” diameter weapon lights. The STBC is reversible and features a single point button sling cup and a 1.5" MIL-STD 1913 Picatinny rail for mounting additional accessories. Blackened stainless steel Allen head screws bring the clamp halves together. Fits Remington 870, 1100, 11-87 and Benelli M1, M2, M4, M1014, 12 gauge

shotguns.




MODEL DESCRIPTION

PSMHG PLAIN STEEL MUZZLE HAND GUARD

SSMHG STAINLESS STEEL MUZZLE HAND GUARD

MHGISL PLAIN STEEL MUZZLE HAND GUARD – LEFT HAND

MHGISR PLAIN STEEL MUZZLE HAND GUARD – RIGHT HAND



SH

OT

GU

N A

CC

ES

SO

RIE

S

S

HO

TG

UN

M

UZ

ZL

E H

AN

D G

UA

RD

S


[email protected]

DETAILS The SAGE MHGISL is a combination Hand Guard and Side Sling for left handed shooters. The SAGE MHGISR is a combination Hand Guard and Side Sling for right handed shooters. The MHGISL and the MHGISR muzzle hand guards are made of plain steel and feature a black nitride finish. Fits 12 gauge Remington® 870, 1100 & 11-87 shotguns. The SAGE PSMHG is a plain steel Muzzle Hand-Guard with a bottom sling loop and a black nitride finish. The SAGE SSMHG is a stainless steel Muzzle Hand-Guard with a bottom sling loop. Fits 12 gauge Remington® 870, 1100 & 11-87 shotguns.

Only available from SAGE or authorized SAGE resellers/distributors.

MHGISR / MSGISL

PSMHG / SSMHG




MODEL DESCRIPTION

SSR870R FRONT OFFSET SLING ATTACHMENT – RIGHT HAND

SSR870L FRONT OFFSET SLING ATTACHMENT – LEFT HAND

SSM590R FRONT OFFSET SLING ATTACHMENT – RIGHT HAND

SSM590L FRONT OFFSET SLING ATTACHMENT – LEFT HAND



SH

OT

GU

N A

CC

ES

SO

RIE

S

S

HO

TG

UN

S

LIN

G F

IT

TIN

GS


[email protected]

DETAILS

The SSR870R and SSR870L are offset shotgun sling fittings. Fits 12 gauge Remington® 870 shotguns and can be used with a variety of SureFire® forend lights.

The SSM590R and SSM590L are offset shotgun sling fittings. Fits 12 gauge Mossberg® 590 shotguns and can be used with a variety of SureFire® forend lights.

Each model features a 1.25” sling loop. All steel construction and finished in a black nitride. Easy to install and does not require any modifications to the shotgun.

Only available from SAGE or authorized SAGE resellers/distributors.



MODEL DESCRIPTION

VFG8P VERTICAL FORE-GRIP - PLAIN

VFG8W VERTICAL FORE-GRIP – W/ TWO (2) PICATINNY RAILS

LENGTH 5.75” (14.60 CM)




SH

OT

GU

N A

CC

ES

SO

RIE

S

S

HO

TG

UN

V

ER

TIC

AL

F

OR

E-G

RIP

S


[email protected]

DETAILS

The VFG8P is a plain steel vertical

fore-grip featuring a hollow plastic

grip.

The VFG8W is a steel vertical fore-

grip with dual side Picatinny rails

and a hollow plastic grip. Both

models are designed to fit 12 gauge

Remington® 870 shotguns.

SAGE shotgun vertical fore-grips help increase weapon control and retention. Additionally the SAGE VFG8W allows accessories to be easily mounted via the dual Picatinny rails. No permanent modification to the shotgun is necessary with either model. Easy to install and remove. Only available from SAGE or authorized SAGE resellers/distributors.

VFG8P VFG8W



NON-SHROUDED GHOST RING SIGHT KITS

MODEL DESCRIPTION

SGRSK/812NS FITS .817" - .827" BARRELS



SGRSK/843MNS FITS .848" - .858" BARRELS (NOTCHED FOR MOSS 590)





SHROUDED GHOST RING SIGHT KITS

MODEL DESCRIPTION

SGRSK/812 FITS .817" - .827" BARRELS



SGRSK/843M FITS .848" - .858" BARRELS (NOTCHED FOR MOSS 590)





SH

OT

GU

N A

CC

ES

SO

RIE

S

S

HO

TG

UN

G

HO

ST

R

IN

G S

IG

HT

K

IT

S


[email protected]

DETAILS SAGE Shrouded and Non-Shrouded Ghost Ring Sight Kits are available in a variety of sizes to accommodate most shotgun barrels. Mounting consists of drilling and tapping three holes, no other modifications are necessary.

All steel construction and features a black nitride finish. Fits barrels with muzzle OD in the .817" to .890" range. Shrouded model protects sight & help with visual alignment No bead is included. Red fiber-optic, green fiber-optic and self powered Tritium is available as an additional item.

Easy to install and remove. Only available from SAGE or authorized SAGE resellers/distributors.

NON-SHROUDED SHROUDED



*SHOTGUN & FLASHLIGHT NOT INCLUDED

MODEL DESCRIPTION

FRS1187 FORCE-RS LIGHT MOUNT - ACCEPTS 1” DIAMETER LIGHTS

MATERIAL STEEL

WEIGHT .3 LBS (.14 LBS)




SH

OT

GU

N A

CC

ES

SO

RIE

S

S

HO

TG

UN

L

IG

HT

M

OU

NT


[email protected]

DETAILS

The SAGE FRS1187 is a FORCE-RS Light Mount designed to fit 12 gauge Remington® 1100 & 11-87 shotguns. Accepts all 1" diameter flashlights or lasers. Light or laser attaches via heavy duty compression collar clamping system. Machined from steel and finished in durable black nitride. Easy to install and remove. No modifications to the shotgun are required. Only available from SAGE or authorized SAGE resellers/distributors.


M4 & M16 VARIANT

ACCESSORIES

ALL VARIANTS

M4

&

M

16

V

AR

IA

NT

A

CC

ES

SO

RIE

S

AL

L V

AR

IA

NT

S


MODEL DESCRIPTION

IPS/MM12 M16 INTERBAR SYSTEM – DIRECT MOUNT FOR 12 GAUGE SHOTGUN. FITS COLT 723, M4, AND 9MM SMG.

IPS/MM12RG M16 INTERBAR SYSTEM – INCLUDES RAIL GRABBER DEVICE. FITS COLT 723, M4, AND 9MM SMG.

MATERIAL ALUMINUM

LENGTH 10.75” (27.30 CM)

WEIGHT IPS/MM12 .8 LBS (.36 KG)

IPS/MM12RG 1.2 LBS (.54 KG)

FINISH HARD ANODIZE



M4

&

M

16

V

AR

IA

NT

A

CC

ES

SO

RIE

S

M

16

IN

TE

RB

AR

S

YS

TE

MS


[email protected]

DETAILS

The IPS/MM12 is an INTERBAR system designed for Colt 723, M4, and 9mm SMG. The IPS bar is drilled to direct mount a 12 gauge shotgun via four mounting screws. Positive lock up on rifle bayonet lug and rifle front hinge pin. Includes INTERBAR, special bottom receiver hinge pin and mounting hardware. The IPS/MM12 is an INTERBAR system designed for Colt 723, M4, and 9mm SMG. The IPS bar mounts a quick opening rail grabber for ease of mounting or releasing the shotgun without removing the IPS Rail. Positive lock up on rifle bayonet lug and rifle front hinge pin. Only available from SAGE or authorized SAGE resellers/distributors.

IPS/MM12 IPS/MM12RG



MODEL DESCRIPTION

QDM4PS M4 QUICK DETACHABLE INTEGRATED PLATFORM

MATERIAL ALUMINUM


LENGTH 10.75” (27.30 KG)

FINISH HARD ANODIZE



M4

&

M

16

V

AR

IA

NT

A

CC

ES

SO

RIE

S

M

4 Q

UIC

K D

ET

AC

H P

LA

TF

OR

M


[email protected]

DETAILS

The QDM4PS is an INTERBAR system designed for Colt 723, M4, and 9mm SMG. The IPS bar mounts a quick opening rail grabber for ease of mounting or releasing the shotgun without removing the IPS Rail. Positive lock up on rifle bayonet lug and rifle front hinge pin. Accommodates breaching shotguns and under-mount grenade launchers. Machined from aluminum and finished with hard anodizing. Includes QD platform system and mounting instructions. Only available from SAGE or authorized SAGE resellers/distributors.



*RIFLE NOT INCLUDED

MODEL DESCRIPTION

MHG16 M4 / M16 MUZZLE HAND GUARD

MATERIAL STEEL





M4

&

M

16

V

AR

IA

NT

A

CC

ES

SO

RIE

S

M

4 / M

16

M

UZ

ZL

E H

AN

D G

UA

RD


[email protected]

DETAILS

The MHG16 an M4/M16 SMG muzzle hand guard. It is designed to fit the Colt 9MM SMG. It is machined from plain steel and is finished in black nitride. Tested and proven design that requires no necessary rifle modifications for installation. Easily removable and installs in seconds via the rifle bayonet lug. Only available from SAGE or authorized SAGE resellers/distributors.



*RIFLE & FLASHLIGHT NOT INCLUDED

MODEL DESCRIPTION

FRSM16S LIGHT MOUNT – FITS COLT M16/M16A2, RUGER MINI-14®

FRSM16G LIGHT MOUNT – FITS COLT M16A2, SMG 9MM

MATERIAL STEEL




M4

&

M

16

V

AR

IA

NT

A

CC

ES

SO

RIE

S

M

4 / M

16

L

IG

HT

M

OU

NT


[email protected]

DETAILS

The FRSM16S and FRSM16G are tactical light mounts designed for a variety of rifle platforms. The FRSM16S fits the Colt M16, M16A2, M4 & Ruger Mini-14®. The FRSM16G fits the Colt M16A2 & 9mm SMG. Designed for easy removal and installation via the rifle bayonet lug. Accepts 1" diameter flashlight or laser. Light or laser attaches via heavy duty compression collar clamping system. Machined from steel and finished in durable black nitride. Only available from SAGE or authorized SAGE resellers/distributors.


SPECIALIZED WEAPON

MOUNTING SYSTEMS

ALL VARIANTS

SP

EC

IA

LIZ

ED

W

EA

PO

N M

OU

NT

IN

G S

YS

TE

MS

AL

L V

AR

IA

NT

S


MODEL DESCRIPTION

762NCSM 7.62 NATO CAPABLE SOFT MOUNT

MATERIAL STEEL





SP

EC

IA

LIZ

ED

W

EA

PO

N M

OU

NT

IN

G S

YS

TE

MS

7

.6

2M

M N

AT

O C

AP

AB

LE

S

OF

T M

OU

NT


[email protected]

DETAILS

The SAGE 762NCSM is a 7.62 NATO capable soft mount that accepts the M240 and M249 machine guns. Machined from steel and finished in durable black nitride. Includes soft mount, pintle and pintle mounting bolt. Only available from SAGE or authorized SAGE resellers/distributors.



*762NCSM NOT INCLUDED

MODEL DESCRIPTION

SMABARG ADAPTER BAR – FITS 762NCSM AND ALLOWS MACHINE GUN MOUNTING

MATERIAL ALUMINUM W/ STAINLESS STEEL COMPONENTS





SP

EC

IA

LIZ

ED

W

EA

PO

N M

OU

NT

IN

G S

YS

TE

MS

S

PE

CIA

LIZ

ED

A

DA

PT

ER

B

AR


[email protected]

DETAILS

The SAGE SMABARG is an adaptor bar that fits all M240 and M249 soft-mounts (762NCSM). Designed for MK14 Mod-O & Mod-1 Rifle, MK 46 & MK 48 Machine Gun. Special gripper allows existing soft-mounts to provide a stable platform for the noted rifle and machine guns. Grips the rifle by its integral Picatinny Rail. No modifications to the rifle are required. Design allows for quick rifle mounting and removal. All springs, pins, and components are stainless steel for added corrosion protection and durability. Only available from SAGE or authorized SAGE resellers/distributors.



*762NCSM NOT INCLUDED

MODEL DESCRIPTION

HMABARG EQUILIBRATED ADAPTER BAR






SP

EC

IA

LIZ

ED

W

EA

PO

N M

OU

NT

IN

G S

YS

TE

MS

E

QU

IL

IB

RA

TE

D A

DA

PT

ER

B

AR


[email protected]

DETAILS

The SAGE HMABARG is an equilibrated adaptor bar that fits all conventional M240 and M249 machine gun mounts. Designed for MK14 Mod-O & Mod-1 Rifle, MK 46 & MK 48 Machine Gun. Special gripper is spring equilibrated allowing a conventional hard machine gun mount to provide a more stable platform for the noted rifle and machine guns. No modifications to the rifle are required. Design allows for quick rifle mounting and removal. All springs, pins, and components are stainless steel for added corrosion protection and durability. Only available from SAGE or authorized SAGE resellers/distributors.



MODEL DESCRIPTION

762RG RAIL GRABBER – LARGE DEVICES



LENGTH 4.87” (12.36 CM)




SP

EC

IA

LIZ

ED

W

EA

PO

N M

OU

NT

IN

G S

YS

TE

MS

R

AIL

G

RA

BB

ER

– L

AR

GE

D

EV

IC

ES


[email protected]

DETAILS

The SAGE 762RG is a special Picatinny rail grabber that allows versatile mounting solutions with the strength to handle 7.62 NATO recoil. An adjustable gripping surface allows for positive, no slip, Picatinny rail engagement even with oversized or undersized rails. No modifications to the rifle are required. Design allows for quick rifle mounting and removal. All springs, pins, and components are stainless steel for added corrosion protection and durability. Only available from SAGE or authorized SAGE resellers/distributors.

TOP VIEW BOTTOM VIEW


SECURITY PRODUCTS

ALL VARIANTS

SE

CU

RIT

Y P

RO

DU

CT

S

AL

L V

AR

IA

NT

S


MODEL DESCRIPTION

VTM028 VEHICLE TIRE MARKER

RCVTM REPLACEMENT CHALK – YELLOW (144 PIECES)

LENGTH 28” (71 CM)

MATERIAL TUBULAR STEEL & PLASTIC


FINISH BLACK POWDER COAT



SE

CU

RIT

Y P

RO

DU

CT

S

V

EH

IC

LE

T

IR

E M

AR

KE

R


[email protected]

DETAILS

The SAGE VTM028 is a 28” vehicle tire marker. Used for regulating parking areas by marking vehicle tires. Tubular steel design and includes an ergonomical hand grip. Features a black powder coat finish. Flexible tubular chalk holder for large diameter chalk. Chalk sold as a separate item-144 pieces per box. Only available from SAGE or authorized SAGE resellers/distributors.



*NOT ALL MODELS SHOWN

MODEL DESCRIPTION

PIM1300C ADJUSTABLE 26”-43”, 5” CONVEX GLASS



PIM1600C ADJUSTABLE 47”-77”, ARMREST, 8” CONVEX GLASS

PIM1300AF ADJUSTABLE 26”-43”, 5” FLAT ACRYLIC



PIM1600AF ADJUSTABLE 47”-77”, ARMREST, 8” FLAT ACRYLIC

PIM1700C ADJUSTABLE 47”-77”, LED LIGHTS, 12” CONVEX




SE

CU

RIT

Y P

RO

DU

CT

S

P

RE

MIE

R IN

SP

EC

TIO

N M

IR

RO

RS


[email protected]

DETAILS

SAGE manufactures a variety of Premier Inspection Mirrors to accommodate most security and inspection needs. Most PIM models feature Convex Glass or Flat Acrylic mirrors and are able to fold for compact storage and transport. Lengths vary from 26” to 77” and all models will fully telescope via the included adjustable twist lock. All models feature a non-slip rubber grip handle. Only available from SAGE or authorized SAGE resellers/distributors.



MODEL PIM1700

DIAMETER 12” (30.48cm) CONVEX

LENGTH COLLAPSED 47” (119.38cm)

LENGTH EXTENDED 80” (203.20cm)

MIRROR OVER GROUND HEIGHT

CASTERS ONLY 3.33” (84.6mm)

WITH ¼” RISER KIT 3.58” (90.9mm)

WITH ½” RISER KIT 3.83” (97.3mm)

WITH ¾” RISER KIT 4.08” (103.6mm)

CHASSIS GROUND CLEARANCE HEIGHT

CASTERS ONLY .160” (4.1mm)

WITH ¼” RISER KIT .410” (10.4mm)

WITH ½” RISER KIT .660” (16.8mm)

WITH ¾” RISER KIT .910” (23.1mm)

BATTERIES NOT INCLUDED (TWO 9-VOLT REQUIRED)

LIGHTS TWO (2) LED LIGHTBARS




SE

CU

RIT

Y P

RO

DU

CT

S

P

IM

17

00

P

RE

MIE

R IN

SP

EC

TIO

N M

IR

RO

R


[email protected]

DETAILS The Sage PIM1700 Premier Inspection Mirror is a 12” convex acrylic security mirror that features an adjustable telescoping handle from 47” to 80” to accommodate most security and inspection needs. The PIM1700 features three (3) smooth casters and multiple riser kit combinations so that chassis ground clearance height can be easily adjusted to accommodate varying surface conditions. The dual LED light bars are illuminated by a waterproof switch located on the underside of the grip. The dual LED lights are angled specifically to give the operator a clear and bright presentation during the inspection process. Features a non-slip rubber grip handle and durable black powder coat finish. Only available from Sage or authorized Sage distributors.


*NOT ALL MODELS SHOWN

MODEL DESCRIPTION

IMFL/12 FIXED LENGTH, 12”, 5” CONVEX GLASS MIRROR

IMFL/30 FIXED LENGTH 30”, 5” CONVEX GLASS MIRROR

IMFL/40 FIXED LENGTH 40”, 5” CONVEX GLASS MIRROR

IMTAL/8 TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 8” CONVEX GLASS MIRROR, WITH WHEEL KIT & WITH FLASHLIGHT HOLDER

IMTAL/5 TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 5” CONVEX GLASS MIRROR, WITHOUT WHEEL KIT & WITH FLASHLIGHT HOLDER

IMHHPM HAND HELD PERSONAL MIRROR 3” X 5”

IMFL/12(AF) FIXED LENGTH, 12”, 5” FLAT ACRYLIC MIRROR



IMTAL/8(AF) TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 8” FLAT ACRYLIC MIRROR, WITH WHEEL KIT & WITH FLASHLIGHT HOLDER

IMTAL/5(AF) TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 5” FLAT ACRYLIC MIRROR WITHOUT WHEEL KIT & WITH FLASHLIGHT HOLDER




SE

CU

RIT

Y P

RO

DU

CT

S

S

TA

ND

AR

D IN

SP

EC

TIO

N M

IR

RO

RS


[email protected]

DETAILS

SAGE manufactures a variety of Standard Inspection Mirrors to accommodate most security and inspection needs. Most SIM models feature Convex Glass or Flat Acrylic mirrors and many are offered with integral flashlight holders. Lengths vary from 12” to 60”. Certain models are offered with telescoping capabilities. Only available from SAGE or authorized SAGE resellers/distributors.


EBR REPLACEMENT PARTS

ALL VARIANTS

EB

R R

EP

LA

CE

ME

NT

P

AR

TS

AL

L V

AR

IA

NT

S


SCHM PART # DESCRIPTION

1 90900 STOCK CHASSIS

2 90901 TOP COVER, STANDARD BARREL

87 90987 TOP COVER, MEDIUM BARREL

88 90988 TOP COVER, MEDIUM BARREL, ACCOMMODATING SEI MOUNT

90 90990 TOP COVER, STANDARD BARREL, ACCOMMODATING SEI MOUNT

3 90903 BUTT STOCK STRUTT ASSEMBLY

4 90904 BUTT STOCK MAIN BODY ASSEMBLY*

5 M14ERGO ERGO GRIP

7 90907 FORE-GRIP (KYDEX), SINGLE UNIT, BLACK OR TAN OR 2-PIECE UNIT

8 90908 CHEEK REST

9 90909 ELEVATOR-CHEEK REST SUPPORT

10 90910 RECOIL PAD (PACHMAYR)

11 90911 BUTT PLATE INTERMEDIATE SPACER

12 90912 ELEVATOR CHEEK REST LOCK WRENCH

13 90913 CHASSIS SLING ATTACHMENT PLATE

14 90914 CHASSIS OPERATING ROD GUIDE

15 90915 BOTTOM RAIL

16 90916 LEFT SIDE RAIL

17 90917 RIGHT SIDE RAIL

18 90918 STOCK LOCK BAR RETURN SPRING

19 90919 PISTOL GRIP MOUNTING SCREW

20 90920 PISTOL GRIP MOUNTING SCREW LOCK WASHER

21 90921 PISTOL GRIP MOUNTING SCREW FLAT WASHER

22 90922 CHEEK REST MOUNTING SCREW (2 EACH)

23 90923 RECOIL PAD MOUNTING SCREW

24 90924 ELEVATOR LOCK SCREW

25 90925 ELEVATOR LOCK NUT

27 90927 BUTT STOCK MAIN BODY SECONDARY MOUNTING SCREW

28 90928 BUTT STOCK MAIN BODY SECONDARY MOUNTING SCREW FLAT WASHER

29 90929 BUTT STOCK MAIN BODY PRIMARY MOUNTING SCREW

30 90930 BUTT STOCK MAIN BODY PRIMARY MOUNTING SCREW FLAT WASHER

31 90931 OPERATING ROD GUIDE SCREW (3 EA)

32 90932 TOP COVER ATTACHMENT SCREWS

33 90933 BOTTOM RAIL ATTACHMENT SCREW (4 EA)

SCHM PART # DESCRIPTION

34 90934 SIDE RAIL ATTACHMENT SCREW (2 EA)

35 90935 FRONT SLING ATTACHMENT

36 90936 FRONT SLING ATTACHMENT BACK PLATE

37 90937 FRONT SLING ATTACHMENT SCREW (2 EA)

38 90938 BARREL TENSION SCREW

39 90939 BARREL TENSION LOCK SCREW

40 90940 FORE-GRIP (KYDEX) ATTACHMENT SCREW

26 90926 FORE-GRIP (KYDEX) ATTACHMENT SCREW FOR 2- PIECE UNIT

41 90941 BUTT STOCK BUTT PLATE WELDMENT ASSEMBLY

42 90942 BUTT STOCK STRUTT ROD (2 EA)

43 90943 BUTT STOCK STRUTT MOUNTING, BUTT STOCK STRUTT STOP SCREW (6 EA)

44 90944 BUTT STOCK SLING ATTACHMENT WIRE

45 90945 COLLAPSIBLE BUTT STOCK MAIN BODY WELDMENT

46 90946 LOCK BAR

47 90947 LOCK BAR ACTUATING BOLT

48 90948 LOCK BAR THUMB RELEASE LEVER

49 90949 LOCK BAR RETURN SPRING RETAINING CUP

50 90950 LOCK BAR THUMB RELEASE LEVER TENSION SPRING

54 90954 ELEVATOR CHEEK REST SUPPORT

55 90955 ELEVATOR CHEEK REST PLUNGER STOP SCREW

56 90958 CRUSH WASHER, SPACER FRONT BAND

EB

R R

EP

LA

CE

ME

NT

P

AR

TS

M

14

AL

CS

E

NH

AN

CE

D B

AT

TL

E R

IF

LE


[email protected]

Current production replacement parts for the M14ALCS

EBR are available. Please use the schematic above to

locate replacement part number.

Please Note: Not all SAGE International, Ltd. products

are available in all areas of the United States and

Canada.


ENHANCED BATTLE RIFLE - Sage International, Ltd · other colors only through licensed T S M...

Documents

Transcript of ENHANCED BATTLE RIFLE - Sage International, Ltd · other colors only through licensed T S M...