ELECTRONIC VIEWFINDER
BVF-20WBVF-20WCE
MAINTENANCE MANUAL1st EditionSerial No. 10001 and Higher (BVF-20W)Serial No. 40001 and Higher (BVF-20WCE)
X-RAY RADIATION WARNINGBe sure that parts replacement in the high voltage blockand adjustments made to the high voltage circuits arecarried out precisely in accordance with the proceduresgiven in this manual.
! WARNINGThis manual is intended for qualified service personnel only.To reduce the risk of electric shock, fire or injury, do not perform any servicing other than thatcontained in the operating instructions unless you are qualified to do so. Refer all servicing toqualified service personnel.
! WARNUNGDie Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um dieGefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind beiWartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegebenWartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigungdazu besitzen.
! AVERTISSEMENTCe manual est destiné uniquement aux personnes compétentes en charge de l'entretien. Afin deréduire les risques de décharge électrique, d'incendie ou de blessure n'effectuer que lesréparations indiquées dans le mode d'emploi à moins d'être qualifié pour en effectuer d'autres.Pour toute réparation faire appel à une personne compétente uniquement.
BVF-20W/20WCE 1(E)
Table of Contents
Manual Structure
Purpose of this manual ........................................................................................ 3 (E)
Contents ............................................................................................................... 3 (E)
Relative manual ................................................................................................... 3 (E)
1. Service Overview
1-1. Location of Printed Circuit Boards .......................................................1-1 (E)
1-2. Periodic Replacement Parts...................................................................1-1 (E)
1-3. Connector Input/Output Signals ............................................................1-1 (E)
1-4. Cleaning ................................................................................................1-2 (E)1-4-1. Cleaning of Viewfinder ........................................................1-2 (E)1-4-2. Care After Using at Special Environment ............................1-2 (E)
1-5. Replacement of CRT .............................................................................1-3 (E)
1-6. Disconnecting/Connecting Flexible Card Wire ....................................1-4 (E)
1-7. Notes on Spare Parts .............................................................................1-4 (E)
2. Electrical Alignment
2-1. General Information for Electrical Adjustment ....................................2-1 (E)2-1-1. Notes on Adjustment ............................................................2-1 (E)2-1-2. Equipment/Fixtures ..............................................................2-1 (E)2-1-3. Connections ..........................................................................2-1 (E)2-1-4. Settings for adjustment .........................................................2-1 (E)2-1-5. Extending viewfinder ...........................................................2-2 (E)
2-2. Vertical Hold Adjustment .....................................................................2-2 (E)
2-3. Horizontal Hold Adjustment .................................................................2-3 (E)
2-4. Bright Set Adjustment ...........................................................................2-3 (E)
2-5. Focus Adjustment..................................................................................2-4 (E)
2-6. Heater Voltage Adjustment ...................................................................2-5 (E)
2-7. Picture Frame Adjustment....................................................................2-5 (E)
2(E) BVF-20W/20WCE
3. Spare Parts
3-1. Exploded Views .......................................................................................... 3-1
3-2. Electrical Parts List ..................................................................................... 3-3
3-3. Supplied Accessories .................................................................................. 3-6
4. Semiconductor Pin Assignments
5. Diagrams and Board Layouts
3(E)BVF-20W/20WCE
Purpose of this manualThis manual is the maintenance manual for Electronic Viewfinder BVF-20W/20WCE.This manual describes the information items necessary when the unit is supplied andinstalled, items that premise the service based on the components parts such asalignment, schematic diagrams, board layouts and spare parts lists, assuming use ofsystem and service engineers.
ContentsThis followings are summaries of the each section for understanding the manual.
Section 1 Service OverviewDescribes information about board locations, connector input/output signals,cleaning, replacement of CRT.
Section 2 Electrical AlignmentDescribes general information for electrical adjustments and the adjustmentsprocedures of this unit.
Section 3 Spare PartsDescribes parts list, exploded views, supplied accessories list used in the unit.
Section 4 Semiconductor Pin AssignmentsDescribes function diagrams and pin names of semiconductor used in the unit.
Section 5 Diagrams and Board LayoutsDescribes overall block diagram, frame wiring and board layouts for every circuitboard.
Relative manualBesides this maintenance manual the following manual is available for this unit.
• Operation Manual (Supplied with this unit)This manual is necessary for application and operation of this unit.
Manual Structure
http://getMANUAL.com
1-1(E)BVF-20W/20WCE
Section 1Service Overview
1-1. Location of Printed Circuit Boards
1-2. Periodic Replacement Parts
Parts listed below are periodic replacement parts. They aresubject to cracks with the lapse of time. Check sometimesby visual, and replace as necessary.
Name Sony Part No.
Wind screen 3-709-096-0X
MIC cushion, rubber 3-692-138-0X *1
Eye cup (S) 3-723-079-0X
*1 It is recommended that the MIC cushions are replacedin pairs. In this case, please order two pieces.
1-3. Connector Input/Output Signals
VF (20P MALE)
(External view)
Pin No. Signal I/O Specifications
1 VTR SAVE IND IN GND:Indicator lightsOPEN:Indicator goes out
2 ABNORMAL IND IN GND:Indicator lightsOPEN:Indicator goes out
3 16:9 MODE IN GND:16:9OPEN:4:3
4 REC (L) IND IN 9 V:Indicator lightsGND or OPEN:Indicator goes out
5 NC
6 CCIR/EIA IN 9.3 V:CCIRGND:EIA
7 DISPLAY OUT ON:OPENOFF:GND
8 G TALLY IN 5 V:Indicator lightsGND or OPEN:Indicator goes out
9 NC
10 NC
11 ZEBRA OUT ON:GNDOFF:5 V
12 VF VIDEO (X) IN 1.0 V p-pZi = 75 Ω
13 NC
14 NC
15 NC
16 BATT IND IN 5 V:Indicator lightsGND or OPEN:Indicator goes out
17 TALLY IND IN 9 V:Indicator lightsGND or OPEN:Indicator goes out
18 + 9.3 V(VF) IN REG + 9.3 V
19 GND GND
20 NC
This unit normally operates with the above input signals.Cameras described in this manual can output the signalssatisfying the specifications.
LP-101 board
VF-67 boardVR-266 board
Eye cup
Wind screen
Mic cushion, rubber
1-2(E) BVF-20W/20WCE
1-4. Cleaning
1-4-1. Cleaning of Viewfinder
By extracting VF tube sub assembly, lens and MC protec-tor can be easily cleaned. And also dust on the CRTsurface or mirror can be easily cleaned off.
1. Turn the hold ring to the left and extract the VF tubesub assembly.
2. Detach the eyecup.3. Remove the MC protector with a commercially
available camera lens cleaner. Blow off dust with ablower carefully so as not to flaw the mirror.
4. After the cleaning is completed, install by reversingthe preceding steps. Align red lines of the VF tube andVF tube sub assembly when inserting, and turn thehold ring to the right until it locks.
n• Do not use any type of solvent, such as alcohol, benzine
or thinner to remove stains.• Be sure to attach the eyecup to the VF, or the MC
protector may come off.• To protect the viewfinder lens from drops, put the MC
protector in the filter holder and attach the eyecupsecurely.
1-4-2. Care After Using at SpecialEnvironment
It is recommended to check the following items aftergathering the news at seaside, dust area or spa.
1. Clean off sand and other dust in the unit carefully.2. Do not allow salt in seawater or sulfur in spa to contact
a not-painted surface of the cabinet. They may cause tocorrode. Clean with alcohol immediately if contacted.
3. Clean the connection surface of connectors.4. Carry out the common operation check.
Align red lines
MC protector
Filter holder
Eyecup (S)
Eyecup cushion
Hold ring
VF tube sub assembly
1-3(E)BVF-20W/20WCE
1-5. Replacement of CRT
1. Loosen the screw of the MIC clamp and open the MICclamp.
2. Remove the two screws (K2.6 X 5).3. Remove the three hexagonal socket bolts (2.6 X 6) and
remove the upper chassis.4. Disconnect the flexible card wire of the VR-226 board.
(How to disconnect the flexible card wire, refer toSection 1-6.)
5. Disconnect the four connectors CN2, CN4, CN5 andanode cable of the VF-67 board.
6. Remove the three screws and remove the CRT fromthe VF tube assembly.
7. Remove the CRT tube from the CRT.
8. Remove the four screws (K2 X 5) and remove themask spacer.
9. Disconnect the connector CN21 on the LP-101 board.
10. Install a new CRT in the reverse procedures of remov-al.
nWhen installing the upper chassis, take care not toclamp the harness between upper and lower chassis.
VF-67 board
CN4
CN2
CN5
CRT
Anode cable
CRT tube
CRT
Lug
VF tube assembly
PTP2.6 X 8
PTP2.6 X 8P2 X 6
Upper chassis
Mic clamp
Flexible card wire
Bolt, hexagon socket 2.6 X 6
VR-266 board
K2.6 X 5
LP-101 board
Mask spacer
CRT
CN21
K2 X 5
K2 X 5
1-4(E) BVF-20W/20WCE
1-6. Disconnecting/Connecting FlexibleCard Wire
The flexible card wire is used between the VF-67 boardand VR-226 board. Take care not to break this flexiblecard wire. This shorten the wire life.
Disconnecting
1. Turn off the power.2. Slide portions A in the direction of the arrow to unlock
and pull out the flexible card wire.
Connecting
n• Be careful not to insert the flexible card wire obliquely.• Check that the conductive surface of the flexible card
wire is not soiled with dust.
1. Slide portions A in the direction of the arrow andinsert the flexible card wire as far as it will go with theconductive surface down.
2. Slide portions A in the reverse direction to lock.
A
Conductive surface
A
1-7. Notes on Spare Parts
1. Safety Related Components WarningComponents marked ! are critical to safe operation.Therefore, specified parts should be used in the case ofreplacement.
2. Standardization of PartsSome spare parts supplied by Sony differ from thoseused for the unit. These are because of parts common-ality and improvement.Parts list has the present standardized repair parts.
3. Stock of PartsParts marked with “o” at SP(Supply Code) column ofthe spare parts list may be not stocked. Therefore, thedelivery date will be delayed.
4. Units RepresentationThe following represented units are changed oromitted in writing.
Units Representation
Capacitance µF uF
Inductance µH uH
Resistance Ω Abbreviation
Temperature °C XXX-DEG-C
5. Destination RepresentationThe part indicated “For J/UC/EK” in the spare partslist is used in the unit written below.For UCJ : The part is used in a unit for U.S.A. ,
Canada and Japan.For CE : The part is used in a unit for regions except
the above countries.
2-1(E)BVF-20W/20WCE
Section 2Electrical Alignment
2-1. General Information for ElectricalAdjustment
2-1-1. Notes on Adjustment
1. When performing adjustment, read throughly thefollowing comments.
• The calibration of all measuring equipment should becompleted.
• Peripheral equipment (camera, and others) alignmentshould be completed.
• “2-1-4. Settings for adjustment” should be completed.• Turn off the power before extending the plug-in board
using the extension board.
wThere is a danger of an electric shock around the CRT dueto high voltage. Therefore, do not touch the CRT.Be very careful when service in a live.
2. Change the Picture Frame mode (4:3/16:9)• When the unit is put into the 16:9 mode, set as follows.
1) Extend the AT-95 board of BVP-550 with EX-464extension board.
2) Short between pins 76 and 100 on the EX-464board using a shorting clip.
• When the unit is put into the 4:3 mode, disconnect theshorting clip as above.
2-1-2. Equipment/Fixtures
• Color video cameraBVP-550/550P
• CCD unitOHB-450/550 series
• Camera adaptorCA-550/550P
• AC adaptorAC-550/550CE or equivalent
• OscilloscopeTektronix 2465B or equivalent
• Waveform monitorTektronix 1750/1751 or equivalent
• B/W monitor• Digital voltmeter• Frequency counter
Fixtures Sony P/N
Pattern box “PTB-500” J-6026-140-B
Resolution chart (4:3) J-6026-100-A
Resolution chart (16:9) J-6394-320-A
VF extension harness J-6395-050-A
Extension board “EX-464”(For BVP-550/550P) J-6395-040-A
2-1-3. Connections
2-1-4. Settings for adjustment
Set switches and each item through the setup menu asfollows before adjustment.
Setup menu :• Execute the Scene File Standard.
MENU : PaintPAGE : Scene File (Page 8)ITEM : Standard
Press the MENU SEL switch on the front panel toexecute the Scene File Standard.
(To be continued)
CCD UNITOHB
ENG/EFP LENS
VFBVF-20W
COLOR VIDEO CAMERABVP-550/550P
CAMERA ADAPTORCA-550/550P
A-ch
75Ω
PATTERNBOX
AC ADAPTORAC-550/550CE
TESTOUT
Waveform monitor
2-2(E) BVF-20W/20WCE
• Set each item through the setup menu as follows.(Refer to the Operation Manual to operate the setupmenu.)
MENU : OperationPAGE : Gain Sw (Page 3)ITEM : Low → 0 dBITEM : Middle → 9 dBITEM : High → 18 dB
Side Panel :VTR SAVE/STBY switch → STBYGAIN switch → L (0 dB)OUTPUT/DCC switch → CAM/OFFWHITE BAL switch → PRST
Front Panel :SHUTTER switch → OFF
2-1-5. Extending viewfinder
1. Turn off the power switch on the camera beforeperforming adjustment.
2. Remove the viewfinder from the camera, then removethe chassis (upper)
3. Connect the viewfinder to the camera using the VFextension harness (J-6395-050-A) .
4. Turn on the main power switch.
2-2. Vertical Hold Adjustment
Preparation
• Extend the IF-510 board of BVP-550/550P with EX-464extension board.
• Short between pins 45 and 92 on the EX-464 board usinga shorting clip.
Adjustment Procedure
1. Equipment : Frequency counterTest point : CP3/VF-67GND : E1/VF-67Adjustment point :1RV9 (V-HOLD) /VF-67Specification : 48.0 ±0.5 Hz (For NTSC)
38.0 ±0.5 Hz (For PAL)
Setting after adjustment
• Disconnect the shorting clip on the EX-464 board.• connect the IF-510 board to the camera.
Chassis (upper)
MIC clamp
VF-67 BOARD (A SIDE)
RV7
CP1RV2
CP3
RV8
RV4 RV3 RV5 RV13
RV9
RV10
RV11
CP5 E1CP4
2-3(E)BVF-20W/20WCE
2-4. Bright Set Adjustment
Preparation
• Set to the 4:3 mode.• OUTPUT/DCC switch (on the camera side panel)
→ BARS/OFF• BRIGHT control → Fully counterclockwise• CONTRAST control→ Fully clockwise
Adjustment Procedure
1. Adjustment point :1RV2 (SUB BRIGHT) /VF-67Specification : Refer to lower figure
2. Set to the 16:9 mode.
3. Adjustment point :1RV4 (SUB BRIGHT WIDE) /VF-67
Specification : Refer to lower figure
2-3. Horizontal Hold Adjustment
Preparation
• Extend the IF-510 board of BVP-550/550P with EX-464extension board.
• Short between pins 45 and 92 on the EX-464 board usinga shorting clip.
Adjustment Procedure
1. Equipment : Frequency counterTest point : CP1/VF-67GND : E1/VF-67Adjustment point :1RV7 (H-HOLD) /VF-67Specification : 15.73 ±0.05 kHz (For NTSC)
15.63 ±0.05 kHz (For PAL)
Setting after adjustment
• Disconnect the shorting clip on the EX-464 board.• connect the IF-510 board to the camera.
AB
A B C
For NTSC modelSpec. :Adjust 1RV2 (1RV4 ) so that portions A and
B on the viewfinder screen can be barelydiscriminated.
For PAL modelSpec. : Adjust1RV2 (1RV4 ) so that portions A
and B on the viewfinder screen can be barelydiscriminated, and portions B and C cannotbe discriminated.
VF-67 BOARD (A SIDE)
RV7
CP1RV2
CP3
RV8
RV4 RV3 RV5 RV13
RV9
RV10
RV11
CP5 E1CP4
2-4(E) BVF-20W/20WCE
2-5. Focus Adjustment
NoteThis adjustment, “2-6. Heater Voltage Adjustment” and“2-7. Picture Frame Adjustment” affect each other.Therefore, repeat these adjustments until these specifica-tions are satisfied.
Preparation
• Set to the 16:9 mode.• Shoot the resolution chart (16:9) so that the chart frame
is aligned with the underscanned monitor frame.• Adjust the iris of the lens so that the output level (peak-
to-peak) at TEST OUT connector/BVP-550.Spec. :70 ±2 IRE (for NTSC)
490 ±14 mV (for PAL)
• BRIGHT control → Mechanical center• CONTRAST control → Mechanical center
Adjustment Procedure
1. Adjustment point :1RV5 (FOCUS) /VF-67Specification : Turn 1RV5 fully counterclock
wise, and slowly turn it clockwiseto adjust the best focus position.
2. Confirm that the focus operation can be performedirrespective of its BRIGHT and CONTRAST controlssetting.
3. Set to the 4:3 mode.
4. Set camera and viewfinder as follows.• Shoot the resolution chart (4:3) so that the chart frame
is aligned with the underscanned monitor frame.• Adjust the iris of the lens so that the output level
(peak-to-peak) at TEST OUT connector/BVP-550.Spec. :70 ±2 IRE (for NTSC)
490 ±14 mV (for PAL)
• BRIGHT control → Mechanical center• CONTRAST control → Mechanical center• Confirm that the focus operation can be performed.
5. Equipment : Digital voltmeterTest point : TP2/VF-67Adjustment point : 1RV2 (OPAMP-ADJ) /VF-67Specification : 6.0 ±0.2 V dc
NoteAfter adjustment is completed, confirm that the focusoperation can be performed irrespective of its BRIGHTand CONTRAST controls setting.
(Viewfinder screen)
(Viewfinder screen)
VF-67 BOARD (A SIDE)
RV7
CP1RV2
CP3
RV8
RV4 RV3 RV5 RV13
RV9
RV10
RV11
CP5 E1CP4
2-5(E)BVF-20W/20WCE
2-7. Picture Frame Adjustment
NoteThis adjustment, “2-5. Focus Adjustment” and “2-6.Heater Voltage Adjustment” affect each other.Therefore, repeat these adjustments until these specifica-tions are satisfied.
Preparation
• Set to the 16:9 mode.• Shoot the resolution chart (16:9) so that the chart frame
is aligned with the underscanned monitor frame.• Adjust the iris of the lens so that the output level (peak-
to-peak) at TEST OUT connector/BVP-550.Spec. :70 ±2 IRE (for NTSC)
490 ±14 mV (for PAL)
• BRIGHT control → Mechanical center• CONTRAST control → Mechanical center
Adjustment Procedure
1.Adjustment point :1RV7 (H-HOLD) /VF-67Specification : If the upper left corner of the picture
is distorted, makes right angle.
2. Adjustment point :1RV11 (V-LIN) /VF-671RV13 (H-LIN) /VF-67
Specification : Minimize the distortion of the fourcircles at the corners of the resolution chart.
(To be continued)
2-6. Heater Voltage Adjustment
NoteThis adjustment, “2-5. Focus Adjustment” and “2-7.Picture Frame Adjustment” affect each other.Therefore, repeat these adjustments until these specifica-tions are satisfied.
Preparation
• Set to the 4:3 mode.• BRIGHT control → Mechanical center• CONTRAST control → Mechanical center• PEAKING control → Mechanical center• Iris of the lens:Close
Adjustment Procedure
1. Equipment : Digital voltmeterTest point : CP4 (H1)/VF-67
CP5 (H2)/VF-67Adjustment point :1RV8 (VH-ADJ) /VF-67Specification : 635 ±15 mV dc
2. Confirm that the specification is met and horizontalnoise irrespective of its BRIGHT, CONTRAST andPEAKING controls setting.
3. Set to the 16:9 mode.
4. Confirm that the specification is met and horizontalnoise irrespective of its BRIGHT, CONTRAST andPEAKING controls setting.
(Viewfinder screen)
(Viewfinder screen)
TP2
VF-67 BOARD (B SIDE)
http://getMANUAL.com
2-6(E) BVF-20W/20WCE
5. Set to the 4:3 mode.
6. Shoot the resolution chart (4:3) so that the chart frameis aligned with the underscanned monitor frame.
7. Adjust the iris of the lens so that the output level(peak-to-peak) at TEST OUT connector/BVP-550.
Spec. :70 ±2 IRE (for NTSC)490 ±14 mV (for PAL)
8. Adjustment point :1RV3 (H-SIZE) /VF-67Specification : Minimize the distortion of center
circle and the four circles at thecorners of the resolution chart.
3. Adjustment point :1RV4 (H-SIZE WIDE) /VF-671RV10 (V-SIZE) /VF-671Centering magnet
Specification : Adjust 1RV4 and 1RV10 so thatthe position of the resolution chartare as shown below.Turn the centering magnet onlywhen the left and lower cornerscannot be adjusted.
4. Place the VF tube to the lower chassis as shownbelow, and confirm that the picture is in the center ofthe viewfinder in the normal installing position.
NoteWhen the centering magnet is turned, paint-lock it again.
(Viewfinder screen)
Centering magnet
(Viewfinder screen)
VF-67 BOARD (A SIDE)
RV7
CP1RV2
CP3
RV8
RV4 RV3 RV5 RV13
RV9
RV10
RV11
CP5 E1CP4
Approx 2mm
Approx 2mm
Chart frameCRT Picture frame
3-1BVF-20W/20WCE
No. Part No. SP Description
1 A-8277-105-A o MOUNTED CIRCUIT BOARD, VF-67 2 A-8277-107-A o MOUNTED CIRCUIT BOARD, VR-226 3 X-3678-575-1 o CHASSIS B ASSY,BOTTOM(LOWER) 4 1-542-296-11 o MICROPONE 5 1-777-028-21 s CORD, CONNECTION (VF)
6 1-777-252-11 o CABLE, FLAT (14 CORE) 7 2-277-457-00 s KNOB, STOPPER 8 2-277-466-01 s SPRING, COMPRESSION 9 3-165-904-01 s WASHER, SCREW STOPPER 10 3-179-882-01 o SPACER, MICROPHONE
11 3-657-657-00 s SCREW (M5) 12 3-679-693-01 o BASE,SLIDE 13 3-679-694-01 o COVER,SLIDE 14 3-679-695-01 o COVER,TALLY 15 3-685-104-01 s NUT (M6), CONTROL
16 3-692-132-03 o COVER,TALLY 17 3-692-134-01 o MIC CLAMP 18 3-692-138-01 s MIC CUSHION,RUBBER 19 3-692-147-01 o GUARD BAR 20 3-692-154-02 s KNOB,VF
No. Part No. SP Description
21 3-697-152-01 o SPRING,LEAF(2) 22 3-697-153-01 o PLATE,GROUND(2) 23 3-697-155-01 o CHASSIS,UPPER 24 3-697-156-01 o CUSSHION,DRROP PROTECCTION(2) 25 3-697-157-01 o LABEL,VF(B)
26 3-697-160-01 o LABEL,VF(C) 27 3-697-161-01 o LID,COVER 28 3-709-096-01 s SCREEN, WINDOW 29 3-710-008-02 s HOUSING, STOPPER
7-621-772-18 s SCREW, +B 2X4 7-627-454-38 s SCREW, PRECISION +K 2.6X5 7-627-554-18 s SCREW,PRECISION +P 2X3.5 TYPE1 7-683-412-05 s BOLT,HEXAGON SOCKET 2.6X6
Precision P2 X 3.5
1
24
1412
13
22
6
216
21
21
18
11
9
17
5
26
1520
25
1927
3
23
29
8
7
4
28
10
B2 X 4
B2 X 4
Precision P2 X 3.5
K2.6 X 5
Precision P2 X 3.5
BOLT, HEXAGON SOCKET 2.6 X 6
BOLT, HEXAGON SOCKET 2.6 X 6
BOLT, HEXAGON SOCKET 2.6 X 6
Section 3Spare Parts
3-1. Exploded Views
VIEW FINDER
3-2 BVF-20W/20WCE
No. Part No. SP Description
101 A-8262-798-A s TUBE SUB ASSY, VF 102 A-8277-114-A s TUBE ASSY, VF 104 ! 1-251-439-11 s CRT/DY ASSY, 2" WIDE 105 1-661-629-11 o PRINTED CIRCUIT BOARD, LP-101
106 3-176-414-01 o RETAINER, RING 107 3-335-207-01 s SHAFT, MOTOR 108 3-573-150-00 o SPRING, COMPRESSION 109 3-603-499-01 o SPACER, MASK
111 3-692-136-01 o FIXED RING 112 3-692-139-01 o MIRROR(2) 113 3-697-151-01 o RING,VF 114 3-697-154-01 o HOLDER,MIRROR(3) 115 3-697-159-01 o PLATE A,DISPLAY
116 3-697-167-01 o VF TUBE(4) 117 3-722-485-01 o ROLLER, SLIDE 118 3-722-492-01 o HOLDER (B), LENS 119 3-723-069-02 o PROTECTOR, MC 120 3-723-073-01 o CUSHION, MIRROR
No. Part No. SP Description
121 3-723-079-02 s EYE CUP 122 3-725-220-02 o TUBE (A), CRT 123 3-726-904-01 o RING (MT), O 124 3-742-038-01 o NUT (2), PLATE 125 3-742-052-03 o HOLDER, EYE CUP
126 3-742-053-02 o RING 127 3-742-054-01 o TUBE 128 3-742-060-01 o HOLDER, RING 129 3-742-075-01 o HOLDER, FILTER
7-627-452-38 s SCREW,PRECISION +K 2X5 7-627-553-78 s SCREW,PRECISION +P 2X10 7-671-158-01 s BALL, STAINLESS (2.5 DIA) 7-685-104-19 s SCREW +P 2X6 TYPE2 NON-SLIT 7-685-134-19 s SCREW +P 2.6X8 TYPE2 NON-SLIT
106129
125108
126117
107
124128
124
127
117107
108
106
119121
120
114
112
101
113
116
111
115
109
105
104
122
P2 X 6
Precision P2 X 10
Precision P2 X 10
K2 X 5
K2 X 5P2.6 X 8
P2.6 X 8
102
118
123
P2 X 6
VIEW FINDER
3-3BVF-20W/20WCE
------------ ----------- LP-101 BOARD VF-67 BOARD ------------ ----------- Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description
1pc 1-661-629-11 o PRINTED CIRCUIT BOARD, LP-101 1pc A-8277-105-A o MOUNTED CIRCUIT BOARD, VF-67
CN21 1-565-651-11 o CONNECTOR 8P, MALE C1 1-163-037-11 s CERAMIC, CHIP 0.022uF 10% 25V C2 1-164-232-11 s CERAMIC, CHIP 0.01uF 10% 100V D1 8-719-026-39 s LED CL-150UR-CD, RED C3 1-164-232-11 s CERAMIC, CHIP 0.01uF 10% 100V D2 8-719-026-39 s LED CL-150UR-CD, RED C4 1-164-232-11 s CERAMIC, CHIP 0.01uF 10% 100V D3 8-719-987-43 s LED CL-150PG-CD, GRN C5 1-104-911-11 s TANTALUM 33uF 20% 10V D4 8-719-026-16 s LED CL-150D-CD, ORG D5 8-719-026-39 s LED CL-150UR-CD, RED C6 1-104-913-11 s TANTALUM 10uF 20% 16V C7 1-163-038-00 s CERAMIC 0.1uF 25V D6 8-719-026-16 s LED CL-150D-CD, ORG C8 1-163-121-00 s CERAMIC, CHIP 150PF 5% 50V C9 1-107-686-11 s TANTALUM 4.7uF 20% 16V C10 1-104-913-11 s TANTALUM 10uF 20% 16V
C11 1-164-232-11 s CERAMIC, CHIP 0.01uF 10% 100V C12 1-164-232-11 s CERAMIC, CHIP 0.01uF 10% 100V C13 1-115-581-11 s TANTALUM 100uF 20% 16V C14 1-163-038-00 s CERAMIC 0.1uF 25V C15 1-115-581-11 s TANTALUM 100uF 20% 16V
C18 1-164-232-11 s CERAMIC, CHIP 0.01uF 10% 100V C19 1-163-243-11 s CERAMIC, CHIP 47PF 5% 50V C20 1-163-038-00 s CERAMIC 0.1uF 25V C21 1-163-038-00 s CERAMIC 0.1uF 25V C22 1-163-038-00 s CERAMIC 0.1uF 25V
C23 1-163-038-00 s CERAMIC 0.1uF 25V C25 ! 1-137-150-11 s FILM 0.01uF 5% 100V C26 1-163-011-11 s CERAMIC 0.0015uF 10% 50V C27 1-107-686-11 s TANTALUM 4.7uF 20% 16V C28 1-107-425-11 s CERAMIC 470PF 10% 1KV
C29 1-115-339-11 s CERAMIC 0.1uF 10% 50V C30 1-128-405-11 s ELECT 22uF 20% 50V C31 1-104-823-11 s TANTALUM 47uF 20% 16V C32 ! 1-136-683-11 s FILM 0.0056uF 2% 100V C33 1-104-913-11 s TANTALUM 10uF 20% 16V
C35 1-135-091-00 s TANTALUN, CHIP 1uF 10% 16V C36 1-104-913-11 s TANTALUM 10uF 20% 16V C37 1-104-913-11 s TANTALUM 10uF 20% 16V C38 1-104-913-11 s TANTALUM 10uF 20% 16V C39 1-163-038-00 s CERAMIC 0.1uF 25V
C40 1-163-038-00 s CERAMIC 0.1uF 25V C41 1-104-913-11 s TANTALUM 10uF 20% 16V C42 1-104-913-11 s TANTALUM 10uF 20% 16V C43 1-135-091-00 s TANTALUN, CHIP 1uF 10% 16V C44 1-163-019-00 s CERAMIC, CHIP 0.0068uF 10% 50V
C45 1-104-913-11 s TANTALUM 10uF 20% 16V C46 1-104-547-11 s FILM 0.0047uF 5% 16V C47 1-163-037-11 s CERAMIC, CHIP 0.022uF 10% 25V C48 1-163-038-00 s CERAMIC 0.1uF 25V C49 1-163-038-00 s CERAMIC 0.1uF 25V
C50 1-135-091-00 s TANTALUN, CHIP 1uF 10% 16V C51 1-135-091-00 s TANTALUN, CHIP 1uF 10% 16V C52 1-163-251-11 s CERAMIC, CHIP 100PF 5% 50V C53 1-163-017-00 s CERAMIC, CHIP 0.0047uF 5% 50V C54 1-128-397-21 s ELECT 100uF 20% 16V
C55 1-163-125-00 s CERAMIC, CHIP 220PF 5% 50V C56 1-104-913-11 s TANTALUM 10uF 20% 16V C57 1-104-912-11 s TANTALUM 3.3uF 20% 16V C58 1-163-038-00 s CERAMIC 0.1uF 25V C60 1-128-394-11 s ELECT 220uF 20% 10V
CN1 1-580-538-11 o CONNECTOR, LY 18P, MALE CN2 1-764-080-21 s CONNECTOR (PC BOARD) 8P, FEMALE
3-2. Electrical Parts List
3-4 BVF-20W/20WCE
(VF-67 BOARD) (VF-67 BOARD)
Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description
CN3 1-569-529-21 o HOUSING, 14P R4 1-218-899-11 s METAL 150K 0.5% 1/16W CN4 1-564-004-11 o CONNECTOR 5P, MALE R5 1-218-692-11 s METAL 1K 0.5% 1/16W CN5 1-506-470-11 s CONNECTOR 5P, MALE R6 1-218-851-11 s METAL 1.5K 0.5% 1/16W R8 1-216-864-11 s METAL, CHIP 0 5% 1/16W D1 8-719-941-86 s DIODE DAN202U R9 ! 1-218-700-11 s METAL 2.2K 0.5% 1/16W D2 8-719-941-86 s DIODE DAN202U D3 8-719-029-68 s DIODE RD6.2UJN-T1 R10 1-218-732-11 s METAL 47K 0.5% 1/16W D4 8-719-820-41 s DIODE 1SS302 R11 ! 1-218-700-11 s METAL 2.2K 0.5% 1/16W D5 8-719-941-86 s DIODE DAN202U R12 ! 1-218-700-11 s METAL 2.2K 0.5% 1/16W R13 ! 1-218-700-11 s METAL 2.2K 0.5% 1/16W D6 8-719-054-32 s DIODE ERA15-06 R15 1-216-794-11 s METAL, CHIP 5.6 5% 1/16W D7 8-719-900-95 s DIODE V09G D8 8-719-941-86 s DIODE DAN202U R16 1-211-977-11 s METAL 22 0.5% 1/16W D9 8-719-901-19 s DIODE V11N R17 1-218-716-11 s METAL 10K 0.5% 1/16W D10 8-719-941-86 s DIODE DAN202U R18 1-218-724-11 s METAL 22K 0.5% 1/16W R19 1-218-714-11 s METAL 8.2K 0.5% 1/16W D11 8-719-941-86 s DIODE DAN202U R20 1-218-684-11 s METAL 470 0.5% 1/16W D12 8-719-820-41 s DIODE 1SS302 R21 1-216-864-11 s METAL, CHIP 0 5% 1/16W DL1 1-411-383-11 s DELAY LINE 80ns R22 1-218-708-11 s METAL, CHIP 4.7K 0.50% 1/16W R23 1-218-722-11 s METAL 18K 0.5% 1/16W FBT1 ! Pending s TRANSFORMER, FLYBACK R24 1-218-684-11 s METAL 470 0.5% 1/16W R25 1-218-676-11 s METAL 220 0.5% 1/16W HLC1 ! 1-409-934-11 o COIL, HORIZONTAL LINEARITY R26 1-218-676-11 s METAL 220 0.5% 1/16W IC2 8-759-209-54 s IC TC4S01F R27 1-218-851-11 s METAL 1.5K 0.5% 1/16W IC3 8-759-242-64 s IC TC4W53F R28 1-218-668-11 s METAL 100 0.5% 1/16W IC4 8-759-510-71 s IC BA10358F-E2 R29 1-218-704-11 s METAL, CHIP 3.3K 0.50% 1/16W IC5 8-759-209-57 s IC TC4S69F R30 1-218-716-11 s METAL 10K 0.5% 1/16W IC6 8-759-422-97 s IC LM334MX R31 1-218-829-11 s METAL 180 0.5% 1/16W IC7 8-759-394-26 s IC LM4041EIM3-1.2 R32 1-218-680-11 s METAL, CHIP 330 0.50% 1/16W IC8 ! 8-759-300-28 s IC HA11423MP R33 1-218-708-11 s METAL, CHIP 4.7K 0.50% 1/16W IC9 8-759-209-57 s IC TC4S69F R34 1-218-680-11 s METAL, CHIP 330 0.50% 1/16W R35 1-218-660-11 s METAL 47 0.5% 1/16W L1 1-410-380-31 s INDUCTOR, CHIP 8.2uH L2 ! Pending s COIL R36 1-218-710-11 s METAL 5.6K 0.5% 1/16W R37 1-218-698-11 s METAL, CHIP 1.8K 0.50% 1/16W LED1 8-719-989-53 s LED CL-200HR-C-TSL, RED R38 1-218-716-11 s METAL 10K 0.5% 1/16W R39 1-218-724-11 s METAL 22K 0.5% 1/16W Q1 8-729-028-91 s TRANSISTOR DTA144EUA-T106 R40 1-218-668-11 s METAL 100 0.5% 1/16W Q2 8-729-028-91 s TRANSISTOR DTA144EUA-T106 Q3 8-729-905-38 s TRANSISTOR 2SC4081T106R R41 1-216-671-11 s METAL, CHIP 6.8K 0.5% 1/10W Q4 8-729-905-23 s TRANSISTOR 2SA1576-R R42 1-208-806-11 s METAL 10K 0.5% 1/10W Q5 8-729-403-29 s TRANSISTOR XN6435 R43 1-216-863-11 s METAL, CHIP 3.3M 5% 1/16W R44 1-216-863-11 s METAL, CHIP 3.3M 5% 1/16W Q6 8-729-024-56 s TRANSISTOR 2SA1808-P R45 1-216-863-11 s METAL, CHIP 3.3M 5% 1/16W Q7 8-729-422-44 s TRANSISTOR 2SK663 Q8 8-729-403-32 s TRANSISTOR XN6534 R46 ! 1-218-700-11 s METAL 2.2K 0.5% 1/16W Q9 8-729-105-37 s TRANSISTOR 2SC3360 R47 1-218-889-11 s METAL 56K 0.5% 1/16W Q10 8-729-105-37 s TRANSISTOR 2SC3360 R48 1-218-732-11 s METAL 47K 0.5% 1/16W R49 ! 1-218-883-11 s METAL 33K 0.5% 1/16W Q11 8-729-905-38 s TRANSISTOR 2SC4081T106R R54 1-218-692-11 s METAL 1K 0.5% 1/16W Q12 8-729-905-23 s TRANSISTOR 2SA1576-R Q16 8-729-903-46 s TRANSISTOR 2SB1132-P R55 ! 1-218-883-11 s METAL 33K 0.5% 1/16W Q17 8-729-013-08 s TRANSISTOR 2SK1113 R56 1-218-708-11 s METAL, CHIP 4.7K 0.50% 1/16W Q18 8-729-013-08 s TRANSISTOR 2SK1113 R58 ! 1-218-883-11 s METAL 33K 0.5% 1/16W R59 1-218-722-11 s METAL 18K 0.5% 1/16W Q19 8-729-905-38 s TRANSISTOR 2SC4081T106R R60 1-218-724-11 s METAL 22K 0.5% 1/16W Q20 8-729-905-23 s TRANSISTOR 2SA1576-R Q21 8-729-905-38 s TRANSISTOR 2SC4081T106R R61 1-218-722-11 s METAL 18K 0.5% 1/16W Q22 8-729-905-38 s TRANSISTOR 2SC4081T106R R62 1-218-704-11 s METAL, CHIP 3.3K 0.50% 1/16W Q23 8-729-905-23 s TRANSISTOR 2SA1576-R R63 1-218-724-11 s METAL 22K 0.5% 1/16W R64 1-218-724-11 s METAL 22K 0.5% 1/16W Q24 8-729-013-08 s TRANSISTOR 2SK1113 R65 ! 1-218-716-11 s METAL 10K 0.5% 1/16W Q25 8-729-013-08 s TRANSISTOR 2SK1113 R67 1-218-740-11 s METAL 100K 0.5% 1/16W R1 1-218-707-11 s METAL, CHIP 4.3K 0.50% 1/16W R68 1-218-692-11 s METAL 1K 0.5% 1/16W R2 1-218-680-11 s METAL, CHIP 330 0.50% 1/16W R69 1-218-716-11 s METAL 10K 0.5% 1/16W R3 1-218-714-11 s METAL 8.2K 0.5% 1/16W R70 1-218-720-11 s METAL 15K 0.5% 1/16W
3-5BVF-20W/20WCE
(VF-67 BOARD) (VF-67 BOARD)
Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description
R71 1-216-857-11 s METAL, CHIP 1M 5% 1/16W S2 1-762-020-11 s SWITCH, TOGGLE R73 1-218-692-11 s METAL 1K 0.5% 1/16W S3 1-762-489-11 s SWITCH, TOGGLE R74 1-216-627-11 s METAL, CHIP 100 0.5% 1/10W R75 1-216-133-00 s METAL, CHIP 3.3M 5% 1/10W VDR1 1-806-497-00 s VARISTOR ERZ-C05DK220 R76 1-216-133-00 s METAL, CHIP 3.3M 5% 1/10W
R77 1-216-133-00 s METAL, CHIP 3.3M 5% 1/10W R78 1-218-740-11 s METAL 100K 0.5% 1/16W R79 1-216-864-11 s METAL, CHIP 0 5% 1/16W R80 1-216-635-11 s METAL, CHIP 220 0.5% 1/10W R81 1-216-651-11 s METAL, CHIP 1K 0.5% 1/10W
R82 1-216-309-00 s METAL, CHIP 5.6 5% 1/10W R85 1-216-853-11 s METAL, CHIP 470K 5% 1/16W R86 1-218-692-11 s METAL 1K 0.5% 1/16W R87 1-218-873-11 s METAL 12K 0.5% 1/16W R88 1-218-881-11 s METAL 27K 0.5% 1/16W
R89 1-218-716-11 s METAL 10K 0.5% 1/16W R90 1-218-714-11 s METAL 8.2K 0.5% 1/16W R91 1-218-668-11 s METAL 100 0.5% 1/16W R92 1-218-724-11 s METAL 22K 0.5% 1/16W R93 1-218-670-11 s METAL 120 0.5% 1/16W
R94 1-218-716-11 s METAL 10K 0.5% 1/16W R95 1-218-736-11 s METAL 68K 0.5% 1/16W R96 1-218-740-11 s METAL 100K 0.5% 1/16W R97 1-216-857-11 s METAL, CHIP 1M 5% 1/16W R98 1-218-873-11 s METAL 12K 0.5% 1/16W
R99 1-218-714-11 s METAL 8.2K 0.5% 1/16W R100 ! 1-218-883-11 s METAL 33K 0.5% 1/16W R101 ! 1-218-700-11 s METAL 2.2K 0.5% 1/16W R102 1-218-752-11 s METAL 330K 0.5% 1/16W R103 1-218-730-11 s METAL 39K 0.5% 1/16W
R104 1-218-710-11 s METAL 5.6K 0.5% 1/16W R105 1-218-716-11 s METAL 10K 0.5% 1/16W R106 1-218-867-11 s METAL 6.8K 0.5% 1/16W R108 1-218-692-11 s METAL 1K 0.5% 1/16W R109 1-218-716-11 s METAL 10K 0.5% 1/16W
R110 1-216-607-11 s METAL, CHIP 15 0.50% 1/10W R111 1-218-704-11 s METAL, CHIP 3.3K 0.50% 1/16W R112 1-218-708-11 s METAL, CHIP 4.7K 0.50% 1/16W R113 1-216-308-00 s METAL, CHIP 4.7 5% 1/10W R114 1-218-883-11 s METAL 33K 0.5% 1/16W
R115 1-218-732-11 s METAL 47K 0.5% 1/16W R116 1-218-740-11 s METAL 100K 0.5% 1/16W R117 1-216-645-11 s METAL, CHIP 560 0.5% 1/10W R118 1-208-774-11 s METAL 470 0.5% 1/10W R119 1-216-603-11 s METAL, CHIP 10 0.5% 1/10W
RV2 1-241-741-11 s RES, ADJ, CERMET 50K RV3 1-241-832-21 s RES, ADJ, CERMET 5K RV4 1-241-832-21 s RES, ADJ, CERMET 5K RV5 1-241-833-11 s RES, ADJ, CERMET 10K RV6 1-241-826-11 s RES, ADJ, CERMET 100
RV7 1-241-832-21 s RES, ADJ, CERMET 5K RV8 1-241-838-11 s RES, ADJ, CERMET 500K RV9 1-241-832-21 s RES, ADJ, CERMET 5K RV10 1-241-828-21 s RES, ADJ, CERMET 500 RV11 1-241-828-21 s RES, ADJ, CERMET 500
RV12 1-241-832-21 s RES, ADJ, CERMET 5K RV13 1-241-826-11 s RES, ADJ, CERMET 100
S1 1-762-488-11 s SWITCH, TOGGLE
3-6 BVF-20W/20WCE
------------ 3-3. Supplied Accessories VR-226 BOARD ------------ Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description
1pc A-8277-107-A o MOUNTED CIRCUIT BOARD, VR-226 1pc 1-542-296-11 o MICROPHONE 1pc 3-697-153-01 o PLATE,GROUND(2) 1pc 3-179-882-01 o SPACER, MICROPHONE 1pc 3-709-096-01 s SCREEN, WINDOW C1 1-104-823-11 s TANTALUM 47uF 20% 16V C2 1-164-232-11 s CERAMIC, CHIP 0.01uF 10% 100V C3 1-164-232-11 s CERAMIC, CHIP 0.01uF 10% 100V C4 1-163-037-11 s CERAMIC, CHIP 0.022uF 10% 25V C5 1-107-686-11 s TANTALUM 4.7uF 20% 16V
C6 1-135-160-21 s TANTALUM 15uF 20% 16V C7 1-163-038-00 s CERAMIC 0.1uF 25V C8 1-164-232-11 s CERAMIC, CHIP 0.01uF 10% 100V
CN11 1-569-529-21 o HOUSING, 14P
D1 8-719-989-53 s LED CL-200HR-C-TSL, RED D2 8-719-989-53 s LED CL-200HR-C-TSL, RED
IC1 8-759-939-53 s IC BA225F-T2
Q1 8-729-028-91 s TRANSISTOR DTA144EUA-T106 Q2 8-729-028-91 s TRANSISTOR DTA144EUA-T106 Q3 8-729-402-19 s TRANSISTOR XN6501 Q4 8-729-402-19 s TRANSISTOR XN6501 Q5 8-729-422-12 s TRANSISTOR 2SK664
R1 1-216-615-11 s METAL, CHIP 33 0.5% 1/10W R2 1-216-645-11 s METAL, CHIP 560 0.5% 1/10W R3 1-216-673-11 s METAL, CHIP 8.2K 0.5% 1/10W R4 1-208-814-11 s METAL 22K 0.5% 1/10W R5 1-208-814-11 s METAL 22K 0.5% 1/10W
R6 1-208-814-11 s METAL 22K 0.5% 1/10W R7 1-218-772-11 s METAL 680K 0.5% 1/10W R8 1-208-822-11 s METAL 47K 0.5% 1/10W R9 1-208-824-11 s METAL 56K 0.5% 1/10W R10 1-216-295-91 s RES, CHIP 0
R11 1-208-822-11 s METAL 47K 0.5% 1/10W R13 1-208-814-11 s METAL 22K 0.5% 1/10W R14 1-208-774-11 s METAL 470 0.5% 1/10W R15 1-208-822-11 s METAL 47K 0.5% 1/10W R16 1-216-645-11 s METAL, CHIP 560 0.5% 1/10W
RV1 1-238-293-11 s RES, VAR CARBON 10K RV2 1-238-290-11 s RES, VAR CARBON 1K RV3 1-238-296-11 s RES, VAR CARBON 10K RV4 1-241-269-11 s RES, ADJ, CERMET 500K
----- FRAME ----- Ref. No. or Q'ty Part No. SP Description
1pc ! 1-251-439-11 s CRT/DY ASSY, 2" WIDE 1pc 1-777-028-21 s CORD, CONNECTION (VF) 1pc 1-777-252-11 o CABLE, FLAT (14 CORE)
HARNESS (LP) (CN2/VF-67 board to CN21/LP-101 board) CN2 1-764-196-11 o HOUSING, 8P 8pcs 1-695-215-11 o CONTACT, 1P AWG26-30 CN21 1-565-652-11 o HOUSING, 8P 8pcs 1-563-940-11 s CONTACT, AWG26-30
4-1
IC
BVF-20W/20WCE
Section 4Semiconductor Pin Assignments
DIODE PAGE
Semiconductors of which functions are equivalent are described
here. For parts replacement, refer to the section of Spare Parts in
this manual. The circuit diagram of each IC is obtained from the
IC data book published by the manufacturer.
1SS302 ............................. 4-2
CL-150D-CD ..................... 4-2CL-150PG-CD .................. 4-2CL-150UR-CD .................. 4-2CL-150UR-CD-T ............... 4-2CL-200HR-C-TSL ............. 4-2
DAN202U .......................... 4-2
RD6.2UJN-T1 ................... 4-2
V09C ................................. 4-2V09G ................................. 4-2V11N ................................. 4-2
IC PAGETRANSISTOR PAGE
2SA1576-R ....................... 4-22SA1808-P ....................... 4-22SA1808-PT106 ............... 4-22SB1132-P ....................... 4-22SC3360-N16 ................... 4-22SC4081T106R ................ 4-22SK1113 ........................... 4-22SK663 ............................. 4-22SK664 ............................. 4-2
DTA144EUA-T106 ............ 4-2
XN6435 ............................. 4-2XN6501 ............................. 4-2XN6534 ............................. 4-2
BA10358F-E2 ................... 4-3BA225F-T2 ....................... 4-3
HA11423MP ..................... 4-3
LM334MX ......................... 4-3LM4041EIM3-1.2 .............. 4-3
TC4S01F .......................... 4-3TC4S69F .......................... 4-3TC4W53F ......................... 4-3
Index
4-2
IC
BVF-20W/20WCE
Diode, Transistor
TRANSISTORDIODE
CL-200HR-C-TSL;RED
-TOP VIEW-
CL-150D-CD;ORANGECL-150PG-CD;GREENCL-150UR-CD;REDCL-150UR-CD-T;REDCL-150D-CD-TCL-150PG-CD-T
DAN202UDAN202UT106
-TOP VIEW-
RD6.2UJN-T1
V09CV09GV11N
2SB1132-P2SB1132-T100-QR
-TOP VIEW-
2SC3360-N162SC4081T106R2SC3360-T1N17
-TOP VIEW-
2SK1113
S
2SK6632SK852-T1X3
-TOP VIEW-
S
DTA144EUA-T106-TOP VIEW-
R1
R2
XN6435XN6435-TW
3
1
2
4
6
5
4
6
5
-TOP VIEW-
1
2
3
XN6501(MATSUSHITA)XN6534XN6501-TWXN6534-TW
6
5
4
1
2
3
-TOP VIEW-
3
1
2
4
6
5
-TOP VIEW-
1SS3021SS302-TE85L
-TOP VIEW- 2SA1576-R2SA1808-P2SA1808-PT1062SA1576T106R
-TOP VIEW-
S
2SK6642SK664-TX
4-3
IC
BVF-20W/20WCE
BA10358F-E2(NS)UPC358G2-E2
1
2
3
4
OUT1
CR1
TRIGGER1
GND
O
T
CR
8
7
6
5
OUT2
CR2
TRIGGER2
VCC (+16V)
O
T
CR
2
6
3
5
CR1
CR2
TRG1
TRG2
1
7
OUT1
OUT2
8
VCC
GND
4
-TOP VIEW-
CR TIMER
BA225F-T2(ROHM)FLAT PACKAGE
3
4
5
6
7
VCC (+12V)
16
15
14
13
12
VCC (+12V)
2 1FIN
18 17
8 9FIN
10 11GND
SYNC SEP
H OSC
X-RAY TRIGG
V TRIGG
V BLKG
V DRIVER
AFC GATE
H DRIVER
V OSC
8SYNC OUT
16H DEF OUT
18V BLKG OUT
1V DEF OUT
3+
11
12
13
14
17
7
4V SIZE
H SIZE
FBP IN
VBS VIDEO
IN
-TOP VIEW-
TV H/V SYNC SIGNAL PROCESSOR
HA11423MP(HITACHI)FLAT PACKAGE
LM334MX(NS)FLAT PACKAGE
LM4041EIM3-1.2(NS)
C-MOS 2-INPUT NOR GATE(SCALE 6/1)
—TOP VIEW—
1 A
A 0 0 1 1
B 0 1 0 1
TYPE 4S01F 7S02F
7S02FU 7SH02FU
VDD +3 to +18V
+2 to +6V
Y 1 0 0 0
B
A
B
1
2
2
GND 3
5 VDD 4Y =
0 ; LOW LEVEL 1 ; HIGH LEVEL
Y = A + B = A • B
Y
4
TC4S01F(TOSHIBA)CHIP PACKAGETC4S01F(TE85R)
TC4W53F(TOSHIBA)CHIP PACKAGE(5.0 X 3.1)
C-MOS INVERTER
(SCALE 6/1) —TOP VIEW—
1
TYPE 7S04F
7SU04F 7SU04FU
4S69F 4SU69F
7SH04FU
VDD
+2 to +6V
2
GND 3
5 VDD
4
A AY =2 4
Y
A 0 1
Y 1 0
0 ; LOW LEVEL 1 ; HIGH LEVEL
Y = A
+3 to +18V
+2 to +5.5V
TC4S69F(TOSHIBA)CHIP PACKAGETC4S69F(TE85R)
ADJUSTABLE CURRENT SOURCE – TOP VIEW –
1 2 3 4
8 7 6 5NC NC
V V
VR
- -
4
1
6,7
R
2,3
V- - V+
V-
V+
SHUNT VOLTAGE REFERENCE– TOP VIEW –
3
1
2+
_
Reverse breakdown voltage = 1.225V
C-MOS 2-CHANNEL MULTIPLEXER / DEMULTIPLEXER
(SCALE 3/1) —TOP VIEW—
1
INH 0 0 1
A 0 1 X
0 1
OPEN
2
3
OPEN
INH VEE
0
1
2 3
C
A
6
7 1
5
GND 4
8 VDD(+3 to +18V)
0 ; LOW LEVEL 1 ; HIGH LEVEL X ; DON'T CARE
6
7
5
ON CHANNEL
CONT.INPUT
DUAL OPERATIONAL AMPLIFIERS — TOP VIEW —
1
2
3
4
8
7
6
5GND
VCC (+3 V to +30 V)
– +
+ –
http://getMANUAL.com
5-1BVF-20W/20WCE 5-1
Section 5Diagrams and Board Layouts
VF BLOCK
VF BLOCKBVF-20WBVF-20WCE
VF BLOCK VF BLOCK
TO CAMERA HEAD
20PIN CONNECTOR Q11
CLAMP
BATT
G TALLY
REC
D1
BATT
D3
G TALLY
D2
REC
D4
ABNORMAL
D6
VTR SAVE
D5
REC (L)
21-1
21-3
21-2
ABNORMAL
VTR SAVE
REC
21-6
21-8
21-7
LP-101
VR-226(1/3)
IC1
TIMER
7
5
1
3
Q3(1/2)
Q3(2/2)
Q1
DRIVER
Q2
DRIVER
Q4(1/2)
INV.
Q4(2/2)
INV.
D1,2
TALLY
REC CONT
REC
ZEBRA
MOMENTARY
TALLY OUT
11-4
11-5
11-6
11-7
11-12
1-12
1-4
1-3 1-14
2-1
2-3
2-2
1-7 1-8
2-6
2-8
2-7
1-6 1-18
3-11
3-10
3-9
1-17
3-8
3-3
1-15
1-9
VIDEO IN
AUDIO IND
G TALLY BATT IND
BATT
G TALLY
REC
VTR SAVE ABNORMAL
ABNORMAL
VTR SAVE
REC(L)
REC TALLY REC(L)
REC CONT
REC
ZEBRA
ZEBRA
MOMENTARY
TALLY OUT
CCIR/EIA
16:9
S1
AUDIO
ON OFF
Q1
DRIVER
Q2
DRIVER
SL1
SL2
SL3
SL4
SL5 SL6
H1
OFF
LOW
S2
ZEBRAON
OFF
MOMENTARY
S3
TALLY
LED1
BACK TALLY
3-6VIDEO VIDEO
11-9
RV2 CONTRAST
11-8
VR-226(2/3)
3-7
Q3
BUFF
DL1 80ns
DELAY
Q4,5
BUFF
INV.
Q6
BUFF
Q7BLKG
CLEAN
RV2
SUB BRIGHT
3-5
3-2
PEAKING
+50V
11-10
11-13
3-4
3-1
RV3
PEAKING
11-11
11-14
RV1
BRIGHT
PEAKING
BRIGHT CTL
Q8,9
AMP
Q10
BUFF
CP2
Q12
RV7
H-HOLD
RV4
H-SIZE (WIDE)
RV3
H-SIZE
+9.3V Q19
RIPPLE FILTER
IC1
12
11
13
8
AFC GATE
SYNC SEP.
C35,D10
CLAMP
Q20
5
+9.3V Q16,IC4
VOLTAGE REG.
IC3
IC1
14
7
6 4 2
1
Q24
C32
18
16H OSC
H DRIVER
VOLTAGE REG
V BLKG
V DRIVERV OSC
RV9
V-HOLD
RV8
V-SIZE
(PAL ONLY)
IC5
42
T1
Q17
Q5
RV4
16 : 916 : 9
Q18 C25
CP1
IC4
COMP7
5 6
RV6
VH-ADJ
RV5
FOCUS SETRV12
OPAMP-ADJ 1 2
42
Q21
AMP
Q22,23
V DRIVER
TP3
C33C31Q25
RV10
V SIZE
RV13
H- LIN
RV11
V-LIN
CP5
CP4
G1 OUT
5-5
H1 OUT
H2 OUT
5-4
5-3
G2 OUT 5-1
-H DEF
+H DEF
+V DEF
-V DEF
4-4
4-5
4-2
4-3
G2
H1
H2
G1
H.DY
CRTANODE
V.DY
VF-67
BVF-20-VIEW FINDER BLOCK#1/M
IC9
INV.
5-2 BVF-20W/20WCE5-2
VF-67 VR-226 LP-101 VIEW FINDER VIEW FINDER VF-67 VR-226 LP-101
2
1
3
4
5
A B C D E F G H
BOARD LAYOUTS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
S
D2CL-150UR-CD-T
D3CL-150PG-CD-T
CN21(1/8)
CN21(2/8)
CN21(3/8)
CN21(4/8)
CN21(5/8)
CN21(6/8)
CN21(7/8)
CN21(8/8)
D1CL-150UR-CD-T
D4CL-150D-CD-T
D5CL-150UR-CD-T
D6CL-150D-CD-T
IC1BA225F-T2
R2
560
R3
8.2k
R4
22k
R5
22k
R6
22k
R7
680k
R8
47k
R9
56k
R10
0R11
47k
R12
NMR13
22k
R14470
R15
47k
R16
560
C5
4.7
16V
C6
15
16V
:TA-CC
CN11
C1
47
16V
:TA
RV3
10k
(C)
RV2
1k
(B)
RV1
10k
(B)
D1
CL-200HR-C-TUL
D2
CL-200HR-C-TUL
C2
0.01
50V
B
C3
0.01
50V
B
C4
0.022
25V
B
C8
0.01
50V
B
C7
0.1
25V
F
Q1DTA144EUAT106
Q2DTA144EUAT106
Q5
2SK664
RV4
500k
Q3XN6501
R1
33
Q4XN6501
1
2
3
4 5
6
8
7
A1
A2
A3
A4
A6
A7
A8
A9
B3
B4
B5
B6
B7
B8
B9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
+9.3V
GND
TALLYG
AUDIO IND
REC/TALLY
VTR SAVE
ABNORMAL
16:9
VIDEO IN
VIDEO(G)
BATT IND
CCIR/ EIA
AUDIO CTL
ZEBRA
REC(L)
HARNESS(LP)
CN101
D1
D2
D3
1
2
3
4
5
6
7
8
BATT
REC
GND
GND
ABNORMAL
G TALLY
REC(L)
VTR SAVE
D4
D5
D6
IC1
9V
REC CONT
REC
ZEBRA
MOMENTARY
VIDEO IN
VIDEO OUT
PEAKING IN
PEAKING
+50V
BRIGHT CTL
TALLY OUT
OUT
RV1:BRIGHT
RV2:CONTRAST
RV3:PEAKING
- 0.8mm
GND
16:9
Q1
Q3
Q2
Q4
Q5
VR-226
LP-101
PART NO.
LOT NO. 602-
PART NO.
LOT NO.602-
B-¥
B-¥
BCXA0144-LP101-11
BCXA0144-VR226-11
1-661-630-11
1-661-629-11
VIEW FINDER
VF-67 - A SIDE -1-661-631-11
VF-67 - B SIDE -1-661-631-11
VR-226- A SIDE -1-661-630-11
LP-101 - B SIDE -1-661-629-11
LP-101 - A SIDE -1-661-629-11
VR-226- B SIDE -1-661-630-11
5-3BVF-20W/20WCE 5-3
VF-60 VR-199 LP-84/85 VIEW FINDER VIEW FINDER VF-60 VR-199 LP-84/85
I J K L M N P
5
4
3
2
1
V
DRIVE
V
OSC
V
TRIG
H
DRIVE
X RAY
TRIG
H
OSC
VCC
V BLKG
AFC GATE
SYNC
SEPARATE
GND
S
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
DELAY
S1
S2
S3
L2
E1
CN4(1/5)5P
CN4(2/5)5P
CN4(3/5)5P
CN4(4/5)5P
CN4(5/5)5P
CN5(5/5)5P
VDR1
SL3
SL1 SL2
SL4
SL5 SL6
Q92SC3360
Q1DTA144EUAT106
Q2DTA144EUAT106
R15
5.6
C5
33
10V
:TA-CC
R19
8.2k
:RN-C
R18
22k
:RN-C
R16
22
L1
8.2µH
R20
470
:RN-C
R23
18k
:RN-C
R22
4.7k
:RN-C
R24
470
:RN-C
R25
220
R26
220
R27
1.5k
:RN-C
R28
100
R30
10k
R31
180
R32
330
R29
3.3k
:RN-C
R34
330
R35
47
R33
4.7k
:RN-C
R39
22k
:RN-C
R36
5.6k
R37
1.8k
C9
4.7
16V
:TA-CA
R40
100
R41
6.8k
:RN-C
C11
0.01
50V
B
R43
3.3M
R44
3.3M
R45
3.3M C12
0.01
50V
B
R47
56k
:RN-C
R46
2.2k
:RN-C
R42
10k
RV11
500
RV10
500
R2
330
R3
8.2k
R4
150k
R6
1.5k
R5
1k
C1
0.022
25V
B
R12
2.2k
R13
2.2k
C3
0.01
50V
B
C4
0.01
50V
B
R49
33k
C30
22
50V
R75
3.3M
R76
3.3M
R77
3.3M
D9
V11N
D4
1SS302
C19
47p
50V
CH
R67
100k
C18
0.01
50V
B
R71
1M
IC8(1/2)HA11423MP
IC8(2/2)HA11423MP
R104
5.6k
RV9
5k
R109
10k
R108
1k
R8
0
R10
47k
C2
0.01
50V
B
R11
2.2k
R9
2.2k
C23
0.1
25V
F
C21
0.1
25V
F
C22
0.1
25V
F
RV12
5k
R73
1k
R68
1k
R101
2.2k
R99
8.2k
C48
0.1
25V
F
TP1
C13
100
16V
:TA-CD
C6
10
15V
:TA-CB
R17
10k
R21
0
DL1G355ENK
C7
0.1
25V
F
C8
150p
50V
CHC10
10
16V
:TA-CB
R48
47k
R78
100k
TP7
RV6
100
R80
220
C39
0.1
25V
F
C27
4.7
16V
:TA-CA
R100
33k
R74
100
C32
0.0056
100V
CP2
TP2
D5
DAN202U
C20
0.1
25V
F
R70
15k
RV5
10k
R63
22k
R64
22k
IC4(1/2)µPC358G2
IC4(2/2)µPC358G2
R62
3.3k
R59
18k
RV4
5k
R54
1k RV3
5k
R61
18k
R60
22k
R56
4.7k
R55
33k
IC3TC4W53F
LED1
CL-200HR-C-TSL
C35
1
16V
:TA-CA
R86
1k
C36
10
16V
:TA-CB
R88
27k
D10
DAN202U
R87
12k
R85
470k
R89
10k
CP4
TP4
TP5
TP9
TP11
TP10
CP3
TP8
RV13
100
R113
4.7
C43
1
16V
:TA-CA
R94
10k
:RN-C
R95
68k
R117
560
C60
220
10V
R119
10
R118
470
C57
3.3
16V
:TA-CA
C58
0.1
25V
F
R114
33k
D12
1SS302
R111
3.3k
R110
15
R112
4.7k
C55
220p
50V
CH
C54
100
16V
C53
0.0047
50V
B
R106
6.8k
R105
10k
R90
8.2k
C40
0.1
25V
F
R92
22k
R91
100
R93
120
C42
10
16V
:TA-CB
C45
10
16V
:TA-CB
RV7
5k
R96
100k
C47
0.022
25V
B C50
1
16V
:TA-CA
R102
330k
R103
39k
RV8
500k
RV2
50k
R38
10k
:RN-C
IC7LM4041EIM3
R79
0
CP1
C51
1
16V
:TA-CA
R81
1k
R115
47k
R116
100k
CP5
D7
V09C
R98
12k
TP3
Q102SC3360
Q72SK852
Q8XN6534
Q62SA1808
Q5XN6435
IC5TC4S69F
IC2TC4S01F
IC9TC4S69F
FBT1TC38-29
R58
33k
Q162SB1132
Q122SA1576
Q112SC4081
Q42SA1576
Q32SC4081
D2
DAN202U
Q172SK1113
Q182SK1113
D8DAN202U
Q242SK1113
R97
1M
Q202SA1576
Q192SC4081
D1DAN202U
D11
DAN202U
Q212SC4081
Q232SA1576
Q252SK1113
HLC1LC37-20
Q222SC4081
TP6
C59
'NM
R7
'NM
C14
0.1
25V
F
C15
100
16V
:TA-CD
C25
0.01
100V
C26
0.0015
50V
B
C28
1K
50V
B
C29
0.1
50V
C31
47µ
16V
C33
10
16V
:TA-CA
C37
10
16V
:TA-CB
C38
10
16V
:TA-CB
C41
10
16V
:TA-CB
C44
0.0068
50V
B
C46
0.0047
16V
:TA-CB
C49
0.1
C52
100p
50V
CH
C56
10
16V
:TA-CB
CN1
18P
CN2
8P
D3
RD6.2UJN
IC6LM334MX
R1
4.3k
R82
5.6
C17
,NM
R69
10k
D6
ERA15
R65
10k
2
3
41
2
3
4
12
11
9
8
13
1510
17
14
7
4 3
6
2
1
18
516
55
1 23 45 6
789101112
1
2
3
5
6
7
1
2
3
4
8
2
3
4
6
1867
4 3 2 5
1
2
3
4 5
67
8 9
A1
A2
A3
A4
A6
A7
A8
A9
B3
B4
B5
B6
B7
B8
B9
1
2
3
4
5
6
7
8
H.DY
V.DY
2
1
6
3
6
1
2
3
0
ANODE
CRT
FRAMEBVF-V20W
+9.3V
+9V
GND
GND
G TALLY
IN
VIDEO IN
AUDIO IND
VIDEO(G)
BATT IND
REC/TALLY
EIACCIR/
VTR SAVE
AUDIO CTL
ABNORMAL
ZEBRA
REC(L)
AUDIO
ON
OFFZEBRA MOMENTARY
TALLYLOW
OFF
HI
OFF
ON
CCIR SWRIPPLE FILTER
G1 OUT
H1 OUT
H2 OUT
G2 OUT
GND
+H DEF
-H DEF
+V DEF
-V DEF
CLAMP
NC 5-2
5-5
5-4
5-3
5-1
4-1
4-5
4-4
4-2
4-3
16:9
1
2
1
3
4
5
6
7
8
REC
BATT
G TALLY
GND
GND
ABNORMAL
VTR SAVE
REC(L)
9V
GND
REC CONT
REC
ZEBRA
MOMENTARY
VIDEO IN
VIDEO
PEAKING
PEAKING
+50V
BRIGHT CTL
TALLY OUT
SET
BACKTALLY
Q11Q8
Q9
Q7
Q6
Q5
Q4
Q2Q1
OUT
OUT
JAE LY 2.0mm
-
- CN3
1
3
2
4
5
6
7
8
9
10
11
12
13
14
16:9
Q10
Q12
Q24
Q19
Q17IC5
IC3
IC4
IC4
D10
Q20
Q21
Q23
Q18
Q3
Q22
RV3;H SIZE
RV5;ANODE SET
RV6;HEATER
RV9;V HOLD RV10;V SIZE
RV11;V LIN
RV7;H.HOLD
RV8;V SIZE(P)
RV2;SUB BRIGHT
RV4;H SIZE(WIDE)
RV3;H LIN
RV12;OPAMP-ADJ
IC2
VF-67PART NO.
LOT NO. 602-
B-¥BCXA0144-VF67-11
1-661-631-11
CODE(VF)
FLEXIBLE CARD WIRE
O
VIEW FINDERVF-67VR-226LP-101B-¥BVF20-FRAME
The material contained in this manual consists ofinformation that is the property of Sony Corporation andis intended solely for use by the purchasers of theequipment described in this manual.Sony Corporation expressly prohibits the duplication ofany portion of this manual or the use thereof for anypurpose other than the operation or maintenance of theequipment described in this manual without the expresswritten permission of Sony Corporation.
Le matériel contenu dans ce manuel consiste eninformations qui sont la propriété de Sony Corporationet sont destinées exclusivement à l'usage desacquéreurs de l'équipement décrit dans ce manuel.Sony Corporation interdit formellement la copie dequelque partie que ce soit de ce manuel ou son emploipour tout autre but que des opérations ou entretiensde l'équipement à moins d'une permission écrite deSony Corporation.
Das in dieser Anleitung enthaltene Material besteht ausInformationen, die Eigentum der Sony Corporation sind,und ausschließlich zum Gebrauch durch den Käufer derin dieser Anleitung beschriebenen Ausrüstung bestimmtsind.Die Sony Corporation untersagt ausdrücklich die Ver-vielfältigung jeglicher Teile dieser Anleitung oder denGebrauch derselben für irgendeinen anderen Zweck alsdie Bedienung oder Wartung der in dieser Anleitungbeschriebenen Ausrüstung ohne ausdrückliche schriftli-che Erlaubnis der Sony Corporation.
Top Related