Eden Gardens
NCC 2019 Section J Report Prepared for Development Application
Project No: SYD0684
Date: 25 February 2021
Revision: 04
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 1
Project: Eden Gardens
Location: 307 Lane Cove Road,
Macquarie Park, NSW
2113
Prepared by: ADP Consulting Pty Ltd
Level 3, 8 Spring Street
Sydney NSW 2000
Project No: SYD0684
Revision: 04
Date: 25 February 2021
Rev Date Comment Author Technical Review Authorization
01 12/11/2020 Draft Issue KS ZN RR
02 17/02/2021 DA issue KS ZN RR
03 24/02/2021 DA Issue – updated to
comments
KS ZN RR
04 25/02/2021 DA Issue – minor updates KS ZN RR
Project Team
Client / Principal Thunderbirds Are Go Pty Ltd atf the Gardeners Trust
Project manager Pier Property Corporation
Architect DKO Architects
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 2
Contents Executive Summary ........................................................................................................................................... 3
1. Introduction ............................................................................................................................................ 6
1.1 Project Background ...................................................................................................................................................................... 6
1.2 Site Context ..................................................................................................................................................................................... 6
1.3 Assessment Assumptions and References .......................................................................................................................... 7
1.4 Scope of Assessment ................................................................................................................................................................... 7
2. Section J DTS Compliance ...................................................................................................................... 8
2.1 Overview ........................................................................................................................................................................................... 8
2.2 Terminology .................................................................................................................................................................................... 8
3. Part J1 Building Fabric ........................................................................................................................ 10
3.1 Responsible Designer ................................................................................................................................................................ 10
3.2 Summary of Requirements ...................................................................................................................................................... 10
3.3 J1.1 Application of Part ............................................................................................................................................................. 10
3.4 J1.2 Thermal Construction Installations .............................................................................................................................. 11
3.5 J1.3 Roof & Ceiling Constructions ........................................................................................................................................ 11
3.6 J1.4 Roof lights ............................................................................................................................................................................. 11
3.7 J1.5 Wall-Glazing Construction System .............................................................................................................................. 11
3.8 J1.6 Floors ....................................................................................................................................................................................... 14
4. Part J3 Building Sealing ...................................................................................................................... 15
4.1 Building Fabric Sealing .............................................................................................................................................................. 15
5. Conclusions & Recommendations ...................................................................................................... 16
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 3
Executive Summary ADP Consulting has been engaged by Thunderbirds Are Go Pty Ltd to undertake the following Section J
assessment for the proposed buildings to be located 307 Lane Cove Road, Macquarie Park, NSW 2113.
This report has been prepared to support the DA submission as a legislative requirement in accordance with
NCC Section J 2019 provisions and has been provided to advise on the minimum Part J1 & J3 (Building Fabric)
requirements for the proposed new and existing buildings within the Eden Gardens proposed site boundary.
This includes the development of a new commercial office tower, restaurant, and garden centre with additional
extensions proposed to the two existing buildings on site, creating new spaces for a neighbourhood shops and
function centre.
Assessment Outcomes
Building Fabric Systems
Based on a review of the proposed Architectural drawings and the calculations carried out as part of this
assessment the following minimum Part J1 performance requirements have been identified.
The following minimum Part J1.5 performance requirements for external walls, roofs and ceilings have been
identified for the Restaurant, Neighbourhood Shops, and Function Centre (Building B, C, and D respectively).
Total system insulation is to be provided as follows:
Envelope Construction Total System R-Value (m²K/W)
Building Type Building B
Restaurant
Building C
Neighbourhood Shops
Building D
Function Centre
J1.5 (i) Total System external wall
construction (wall area <80%) ≥ 1.0 ≥ 1.0 ≥ 1.0
J1.5 (ii) Total System external wall
construction (wall area >80%) NA NA ≥ 1.4
J1.5 (iii) Internal Wall insulation – wall
separating conditioned and unconditioned
spaces
≥ 1.4 ≥ 1.4 ≥ 1.4
Envelope Construction Total System R-Value (m²K/W)
J1.6 All Floor constructions
concrete slab on ground and floors above an unconditioned zone
≥ 2.00 (downwards heat flow)
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 4
Glazing Systems
The following minimum Part J1.5 performance requirements for external glazing has been identified for the
following orientations of the Restaurant, Neighbourhood Shops, and Function Centre (Building B, C, and D
respectively).
Building B – Restaurant
Glazing – Frame Construction
(Uniform solution)
Façade orientation Total System U-Value
(W/m²K)
Total System
SHGC
Ground floor North ≤ 2.4 ≤ 0.34
Ground floor East ≤ 2.4 ≤ 0.34
Ground floor South ≤ 2.4 ≤ 0.34
Ground floor West ≤ 2.4 ≤ 0.34
Building C - Neighbourhood Shops
Glazing – Frame Construction
(Uniform solution)
Façade orientation Total System U-Value
(W/m²K)
Total System
SHGC
Ground floor North ≤ 2.20 ≤ 0.18
Ground floor East ≤ 2.20 ≤ 0.18
Ground floor South ≤ 2.20 ≤ 0.18
Ground floor West ≤ 2.20 ≤ 0.18
Building D - Function Centre
Glazing – Frame Construction
(Non-uniform solution)
Façade orientation Total System U-Value
(W/m²K)
Total System
SHGC
Lower Ground floor North N/A N/A
Lower Ground floor East ≤ 2.14 ≤ 0.19
Lower Ground floor South ≤ 5.80 ≤ 0.81
Lower Ground floor West ≤ 3.25 ≤ 0.36
Ground floor North ≤ 2.95 ≤ 0.37
Ground floor East ≤ 2.18 ≤ 0.16
Ground floor South ≤ 5.80 ≤ 0.81
Ground floor West N/A N/A
Note: the above window frame construction values are AFRC total system values and include both the glazing and frame
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 5
Please note the following:
> It is anticipated that will be no air conditioning provided for Building E: Garden Centre and as such this
building is not required to meet the minimum Section J provisions for energy efficiency. This Building is
not included within the scope of this assessment.
> Building A: Commercial Office Tower will demonstrate compliance with Section J though the alternative
JV3 Verification Methodology. A separate energy modelling assessment and report has been provided.
Please refer to the ADP SYD0684_Eden Gardens JV3 Modelling Report_Rev04 Report for compliance.
> It assumed that all other NCC Section J requirements (J5 to J8) will be designed to meet the minimum
Deem-to-Satisfy (DTS) requirements. Compliance is subject to confirmation from the D&C contractor that
all as-installed details pertaining to the thermal performance are within the performance requirements as
detailed in this report. It is the responsibility of the D&C contractor, architect and building surveyor to
ensure all final construction selections are compliant
> Any changes to the architecture plans may result in a change to the wall-glazing performance
specifications detailed in this report
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 6
1. Introduction
1.1 Project Background ADP Consulting has been engaged by Thunderbirds Are Go Pty Ltd to undertake the following Section J
compliance assessment detailing the minimum building fabric requirements for the proposed buildings to be
located at 307 Lane Cove Road, Macquarie Park, NSW 2113
The purpose of this report is to demonstrate that all building fabric construction proposed for new buildings
on site (including any alterations and additions to the existing buildings) meet the minimum Section
compliance requirements outlined in the NCC 2019 for Parts J1 (Building Fabric) & J3 (Building Sealing)
provisions.
1.2 Site Context The Eden Garden development will comprise of 5 proposed building consisting of a new commercial office
tower, restaurant, and garden centre with additional extensions proposed to the two existing buildings,
creating new spaces for a neighbourhood Shops and function centre.
The site is located close to Macquarie Park within the City of Ryde Council boundaries and is located between
the Lane Cove Road to the northwest and the Lane Cove National Park stretching out to the southeast.
Figure 1 Proposed Development Site Plan
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 7
1.3 Assessment Assumptions and References
This Section J report has been prepared based on a review of the following reference documents and
standards:
> Section J provisions of the NCC 2019 Building (BCA) Code of Australia
> 3D IFC Model issued on 05/02/2021
> DA Drawings provided by DKO Architects issued 13/02/2021
> Amended Drawings for Function Centre provided by DKO Architects issued 16/02/2021
1.4 Scope of Assessment
The following new and existing buildings are to be located within the Eden Garden site boundary have been
included in the scope of this Section J compliance assessment:
Table 1 BUILDINGS UNDER ASSESSMENT
Building Type Development Type Building Space
Classification
Assessment
Methodology
Building A:
Commercial Office Tower
New Building Class 5 (Office) JV3 Alternative
Verification
Building B:
Restaurant
New Building Class 6 (Retail) DTS Calculator
Building C:
Neighbourhood Shops
Existing Building
Additions & Alterations
Class 6 (Retail) DTS Calculator
Building D:
Function Centre
Existing Building
Additions & Alterations
Class 9b (Assembly
building
DTS Calculator
Building E:
Eden Gardens/Carpark & BOH
services, Horticulture, Retail, and
Garden centre
New Building Class 6 (Retail), Class 7b
(loading dock and
storage), Class 7a
(Carpark), Class 9b
(assembly area)
No Section J
Requirement
Please Note:
> It is anticipated that will be no air conditioning provided for Building E: Eden Gardens/Garden Centre
and as such this building is not required to meet the minimum Section J provisions for energy efficiency.
This Building is not included within the scope of this assessment.
> Building A: Commercial Office Tower will demonstrate compliance with Section J though the alternative
JV3 Verification Methodology. A separate energy modelling assessment and report has been provided.
Please refer to the ADP SYD0684_Eden Gardens JV3 Modelling Report_Rev04 for compliance.
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 8
Figure 1 SITE PLAN MARK-UP
2. Section J DTS Compliance 2.1 Overview
Section J of the NCC was introduced to set minimum energy efficiency measures for the various classifications
of building types while still maintaining acceptable internal environmental conditions for occupants. The
measures were designed to reduce the use of artificial heating and cooling, improve the energy performance
of lighting, conditioning, and ventilation, and reduce energy loss through air leakage. These reductions are
achieved by setting specific prescriptive design criteria for the building fabric (section J1 & J3) and the building
services (section J5 to J8). Compliance is achieved when these minimum prescriptive requirements are met.
Where the minimum performance requirements cannot be met through the projects design intent an
alternative JV3 Verification methodology can used, demonstrating that the estimated energy consumption of
the proposed design is less than that of a DTS solution.
2.2 Terminology
2.2.1 Thermal Performance of a Wall-Glazing Construction
When determining an appropriate wall-glazing construction for a building project, the building’s thermal
envelope will be required to comply with certain performance values for energy efficiency and occupant
thermal comfort. The two heat transfer mechanisms that determine the performance of a wall-glazing
construction include conduction and solar heat gain. In order to comply with the Section J provisions, the wall-
glazing system must achieve a specified U-value and Solar Heat Gain coefficient (SHGC). It is important to note,
that these values are to be read as “total system values” and are inclusive of both the frame and glazing1.
1 Thermal Performance values are available for all aluminium window and door products as part of their WERS rating
(http://www.wers.net/wers-home).
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 9
2.2.2 U-Value
U-value is the measure of a wall-glazing constructions ability to conduct heat. The lower the U-value, the
greater the insulation properties of the construction. In all cases regardless of climate zone, a façade
construction with high performance insulation properties will assist with improving a building’s occupant
thermal comfort and energy efficiency. It is also to be noted that the conductive U-value is equal to the inverse
of insulative R-value (U = 1/R).
2.2.3 R-Value
R-value is the measure of a wall-glazing constructions resistance to heat flow. The higher the R-value, the
higher the level of insulation and thermal performance. It is also to be noted that the insulative R-value is equal
to the inverse of the conductive U-value (R = 1/U).
2.2.4 Solar Heat Gain Coefficient (SHGC)
> Solar Heat Gain Coefficient (SHGC) is the fraction of incident solar radiation admitted through a window.
In a warm climate, windows which have a low SHGC allow less solar radiation to pass through. This reduces the
buildings heat load and need for active cooling2.
2 Further information on glazing performance can be found at (https://www.yourhome.gov.au/passive-design/glazing
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 10
3. Part J1 Building Fabric
3.1 Responsible Designer
For the purposes of Part J1 – Building Fabric Compliance, the responsible designers are identified as the project
Architect and Façade Engineer (where applicable). The minimum insulation and glazing recommendations
outlined in this report must be addressed for construction.
It assumed that all other NCC Section J requirements (J5 to J8) will be designed to meet the minimum Deem-
to-Satisfy (DTS) requirements and will be the responsibility of the D&C contractor, services sub-contractors
and building surveyor to ensure the final construction incorporates a compliant solution.
3.2 Summary of Requirements
Part J1 establishes minimum construction and performance provisions required for the projects specific climate
zone and building classification. This will apply to the following Part J1 criteria:
> J1.2 Thermal construction installations
> J1.3 Roof and ceiling construction
> J1.4 Roof lights
> J1.5 Combined wall & glazing system
> J1.6 Floor constructions
Insulation and glazing performance requirements have been provided to meet the minimum compliance
measures for the above areas.
3.3 J1.1 Application of Part
Section J 2019, Part J1 is applicable to the scope of the design and construction works identified for the project.
For the purposes of this project the proposed works consist of the design and development of the following
proposed buildings:
> Building B Restaurant (New Building)
> Building C Neighbourhood Shops (Alterations & Additions)
> Building D Function Centre (Alterations & Additions)
Please note:
> Building E: Garden Centre has no minimum Section J requirements and as such does not form part of
the scope of assessment.
> Building A: Commercial Office Tower has been assessed using the JV3 Alternative Verification Modelling
Methodology. Please refer to the ADP SYD0684_Eden Gardens JV3 Modelling_Rev04 Report
> The following section of this report is intended to provide an analysis of the building elements forming
the envelope of the development as required under Part J1 and intends to demonstrate compliance
using the NCC 2019 Wall-Glazing calculator shown in (Figure 2).
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 11
3.4 J1.2 Thermal Construction Installations
All insulation for all buildings installed for the project must comply with section J1.2 of the BCA. All Installed
insulation must adhere to the following requirements:
> Form a continuous barrier with ceilings, walls bulkheads, floors or similar that inherently contribute to the
building’s thermal envelope
> Abut or overlaps all adjoining insulation other than insulation located at supporting members such as
studs, noggings, furring channels or similar
> It is important that the insulation provided must not hinder the safe or effective operation of any service
or fittings
> All insulation must comply with AS4859.1.
> Specific installation requirements further referring to bulk or reflective insulation are outlined in Part J1.2
of the NCC 2019 Section J provisions.
3.5 J1.3 Roof & Ceiling Constructions
Roofs or ceiling constructions for all buildings must achieve a minimum total R-value greater than or equal to
R3.7 for a downward direction of heat flow. The solar absorptance of the upper surface of the roof must not
be more than 0.45.
3.6 J1.4 Roof lights
No roof lights serving a conditioned space have been identified on the architectural drawings provided.
3.7 J1.5 Wall-Glazing Construction System
Part J1.5 establishes the minimum external wall and window construction performance required for the
proposed building. This is assessed against the projects location and climate as per the Australian Building
Codes Board (ABCB) Climate Zone Map (Figure 3).
> The development is situated in climate zone 5 – warm temperate.
> Compliance for each wall orientation is identified as the Total System U-Value of the wall-glazing
construction and is determined through the use of the NCC Section J 2019 Wall-Glazing Calculator (Figure 2).
Figure 2 NCC 2019 Wall-Glazing Calculator Figure 3 ABCB Climate Zone
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 12
3.7.1 Part J1.5- Wall Systems
> Wall Insulation performance has been assessed as per the Section J wall-glazing calculator. The following
minimum Part J1.5 performance requirements for external walls have been identified for the Restaurant,
Neighbourhood Shops, and Function Centre (Building B, C, and D respectively).
Please refer to Appendix B for the external Façade insulation mark up,
Total system insulation is to be provided as follows:
Envelope Construction Total System R-Value (m²K/W)
Building Type Building B
Restaurant
Building C
Neighbourhood Shops
Building D
Function Centre
J1.5 (i) Total System external wall
construction (wall area <80%) ≥ 1.0 ≥ 1.0 ≥ 1.0
J1.5 (ii) Total System external wall
construction (wall area >80%) NA NA ≥ 1.4
J1.5 (iii) Internal Wall insulation – wall
separating conditioned and unconditioned
spaces
≥ 1.4 ≥ 1.4 ≥ 1.4
Note: The insulation value above are performance values for the total wall system, inclusive of any concrete slabs, air cavities,
wall studs or cladding proposed.
3.7.2 Part J1.5- Glazing Systems
> Glazing performance has been assessed as per the Section J wall-glazing calculator. The following
minimum Part J1.5 performance requirements for external glazing has been identified for the following
orientations of the Restaurant, Neighbourhood Shops, and Function Centre (Building B, C, and D respectively).
Please refer to Appendix A for the completed NCC 2019 Section J Wall-Glazing Calculators
Building B – Restaurant
Glazing – Frame Construction
(Uniform solution)
Façade orientation Total System U-Value
(W/m²K)
Total System
SHGC
Ground floor North ≤ 2.4 ≤ 0.34
Ground floor East ≤ 2.4 ≤ 0.34
Ground floor South ≤ 2.4 ≤ 0.34
Ground floor West ≤ 2.4 ≤ 0.34
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 13
Building C - Neighbourhood Shops
Glazing – Frame Construction
(Uniform solution)
Façade orientation Total System U-Value
(W/m²K)
Total System
SHGC
Ground floor North ≤ 2.20 ≤ 0.18
Ground floor East ≤ 2.20 ≤ 0.18
Ground floor South ≤ 2.20 ≤ 0.18
Ground floor West ≤ 2.20 ≤ 0.18
Building D - Function Centre
Glazing – Frame Construction
(Non-uniform solution)
Façade orientation Total System U-Value
(W/m²K)
Total System
SHGC
Lower Ground floor North N/A N/A
Lower Ground floor East ≤ 2.14 ≤ 0.19
Lower Ground floor South ≤ 5.80 ≤ 0.81
Lower Ground floor West ≤ 3.25 ≤ 0.36
Ground floor North ≤ 2.95 ≤ 0.37
Ground floor East ≤ 2.18 ≤ 0.16
Ground floor South ≤ 5.80 ≤ 0.81
Ground floor West N/A N/A
Note: the above window frame construction values provided for Buildings C, D, & E are AFRC total system values and include
both the glazing and frame
Solar Admittance
The maximum solar admittance for the above solution for each building has been calculated as a percentage
of the incident solar irradiance allowed for the wall-glazing construction of each orientation. Part J1.5b
stipulates that the solar admittance for each façade aspect must not exceed a maximum value of 0.13 for a
Class 5 and Class 6 building and 0.10 for Class 9b buildings.
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 14
3.8 J1.6 Floors
Part J1.6 establishes the minimum floor construction performances required for a concrete slab on ground
and floor spaces above an unconditioned zone.
> The following minimum Part J1.6 performance requirements for floor constructions have been identified
for the Restaurant, Neighbourhood Shops, and Function Centre (Building B, C, and D respectively).
Please refer to Appendix B for the floor construction insulation mark up.
Total system insulation is to be provided as follows:
Envelope Construction Total System R-Value (m²K/W)
J1.6 All Floor constructions
concrete slab on ground and floors above an unconditioned zone
≥ 2.00 (downwards heat flow)
Please note where insulation is to be provide to concrete slab on ground, the following requirements are to
be met. Insulation provided must be:
> Water resistant
> Form a continuous barrier from the adjacent finished ground level to a depth of no less then 300mm or
be installed for the full length of the concrete slab on ground’s vertical edge.
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 15
4. Part J3 Building Sealing
4.1 Building Fabric Sealing
> The minimum building sealing requirements for all proposed works for each building must adhere to
the following requirements:
> Seals must be fitted to each edge of a door, operable window, or the like
> An entrance to a building, if leading to a conditioned space must have an airlock, self-closing door,
revolving door, or the like.
> Ceilings, walls, floors, and any opening such as a window frame, door frame, roof light frame or the like
must be:
– constructed to minimise air leakage in accordance with when forming part of the building envelope
– enclosed by internal lining systems that are close fitting at ceiling, wall, and floor junctions; or:
– sealed at junctions and penetrations with close fitting architrave, skirting or cornice; or expanding
foam, rubber compressible strip, caulking or the like.
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 25 February 2021 Rev: 04 16
5. Conclusions &
Recommendations This assessment has been carried out to demonstrate that where relevant to Section J the proposed buildings
comply with the energy efficiency requirements specified within Section J of the NCC 2019.
It is evident from the above assessment that the proposed façade can meet the minimum provisions for Parts
J1 & J3 for all levels.
Should the project wish to consider a different glazing system, a JV3 energy modelling solution can be
undertaken to maintain compliance.
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 17 February 2021 Rev: 02 17
Appendix A
DTS Façade-Glazing Calculators
[KUTOOLSFOREXCEL]
Compliant Solution = Date Non-Compliant Solution = 28/10/2020
Name Method 2Khyati Saxena North East South West All
Company Wall-glazing U-Value (W/m².K) 2.27 1.73 2.27 1.73 1.99
ADP Consulting 2.00 2.00 2.00 2.00 2Solar Admittance 0.11 0.09 0.25 0.09
Position 0.13 0.13 0.13 0.13Sustainabilty Engineer AC Energy Value 69
69.80844Building Name / AddressRestaurant - lane coveMacquarie park
Method 1Building State
NSW
Climate Zone
Building Classification
Storeys Above Ground Method 21
North East South West
Glazing Area (m²) 37 48 114.84 48
Glazing to Façade Ratio 91% 52% 91% 52%
Methodology
Average Glazing U-Value (W/m².K) 2.40 2.40 2.40 2.40
Average Glazing SHGC 0.34 0.34 0.34 0.34
Wall Area (m²) 3.7 43.6 11.5 43.6
Methodology
Average Wall R-value (m²K/W) 1.00 1.00 1.00 1.00
Solar Absorptance 0.6 0.6 0.6 0.6
IMPORTANT NOTICE AND DISCLAIMER IN RESPECT OF THIS CALCULATOR
Calculator
East + East - SH + South + South - SH + West + West - SH +
Horizontal
0 +
AFRC (True module size)
Horizontal
0 +
0 +
Climate Zone 5 - Warm
temperate
Project Summary
Method 1
Class 6 - restaurants, cafes,
bars
The summary below provides an overview of where compliance has been achieved for Specification J1.5a -
Calculation of U-Value and solar admittance - Method 1 (Single Aspect) and Method 2 (Multiple Apects).
Wall + Wall +
0 +
Horizontal Horizontal
Wall Thickness
NCC Specification J1.5b
Wall Construction
Glazing References
Shading Systems
0 + 0 + 0 + 0
Wall <80% + Wall <80% + Wall <80% +
Wall + Wall +
Project Details
0 + 0 + 0 + 0 +
0 + 0 + 0 +
North - SH +
Wall Types
Glass Types
Glazing System Types
Frame Types 0 +
Wall <80% +
2.27 1.73 2.27 1.730.8
1.3
1.8
2.3
2.8
North East South West
W/m
²K
Wall-glazing U-Value
Proposed Design DTS Reference
0.11 0.09 0.25 0.090.04
0.09
0.14
0.19
0.24
0.29
North East South West
SA
Solar Admittance
Proposed Reference DTS Reference
2.00 1.990.8
1.3
1.8
2.3
W/m
²K
Wall-glazing U-Value - ALL
DTS Reference Proposed Design
70 6960
65
70
75
AC
En
erg
y
AC Energy Value
DTS Reference Proposed Design
FaçadeReport
By accessing or using this calculator, you agree to the following: While care has been taken in the preparation of this calcu lator, it may not be complete or up-to-date. You can ensure that you are using a complete and up-to-date version by checking the Australian Building Codes Board website (www.abcb.gov.au). The Australian Building Codes Board, the Commonwealth of Australia and States and Territories of Australia do not accept any liability, including liability for negligence, for any loss (howsoever caused) , damage, injury, expense or cost incurred by any person as a result of accessing, using or relying upon this calculator, to the maximum extent permitted by law. No representation or warranty is made or given as to the currency, accuracy, reliability, merc hantability, fitness for any purpose or completeness of this calculator or any information which may appear on any linked websites, or in other linked information sources, and all such representations and warranties are excluded to the extent permitted by law. This calculator i s not legal or professional advice. Persons rely upon this calculator entirely at their own risk and must take responsibility for assessing the relevance and accuracy of the information in relation to their particular circumstances.
© Commonwealth of Australia and the States and Territories of Australia 2019, published by the Australian Building Codes Board.The material in this calculator is licensed under a Creative Commons Attribution-No Derivatives—4.0 International licence, with the exception of third party materials and any trade marks. It is provided for general information only and without warranties of any kind. You may not make derivatives of this calculator, but may only use a verbatim copy. More information on this CC BY ND licence is set out at the Creative Commons Website. For information regarding this calculator, see www.abcb.gov.au.
DTS ConstructionValues
Eden Gardens Lane Cove - Building B - Restaurant Uniform Solution
[KUTOOLSFOREXCEL]
Compliant Solution = Date Non-Compliant Solution = 15/02/2021
Name Method 2Khyati Saxena North East South West All
Company Wall-glazing U-Value (W/m².K) 2.12 1.75 1.44 1.94 1.87
ADP Consulting 2.00 2.00 2.00 2.00 2Solar Admittance 0.11 0.13 0.06 0.15
Position 0.13 0.13 0.13 0.13Sustainabilty Engineer AC Energy Value125
126.021194Building Name / AddressGarden centre/Neighbourhood shops - lane coveMacquarie park
Method 1Building State
NSW
Climate Zone
Building Classification
Storeys Above Ground Method 21
North East South West
Glazing Area (m²) 85 167.94 11.15 154.7
Glazing to Façade Ratio 94% 70% 49% 83%
Methodology
Average Glazing U-Value (W/m².K) 2.20 2.20 2.20 2.20
Average Glazing SHGC 0.18 0.18 0.18 0.18
Wall Area (m²) 5.1 72.2 11.65 32.8
Methodology
Average Wall R-value (m²K/W) 1.40 1.40 1.40 1.40
Solar Absorptance 0.6 0.6 0.6 0.6
IMPORTANT NOTICE AND DISCLAIMER IN RESPECT OF THIS CALCULATOR
Calculator
East + South + South - SH + West +
Horizontal
0 +
AFRC (True module size)
Horizontal
0 +
0 +
Climate Zone 5 - Warm
temperate
Project Summary
Method 1
Class 6 - department stores,
shopping centres
The summary below provides an overview of where compliance has been achieved for Specification J1.5a -
Calculation of U-Value and solar admittance - Method 1 (Single Aspect) and Method 2 (Multiple Apects).
Wall + Wall +
0 +
Horizontal Horizontal
Wall Thickness
NCC Specification J1.5b
Wall Construction
Glazing References
Shading Systems
0 + 0 + 0 + 0
Wall >80% + Wall >80% + Wall >80% +
Wall + Wall +
Project Details
0 + 0 + 0 + 0 +
0 + 0 + 0 +
North +
Wall Types
Glass Types
Glazing System Types
Frame Types 0 +
Wall >80% +
2.12 1.75 1.44 1.940.8
1.3
1.8
2.3
North East South West
W/m
²K
Wall-glazing U-Value
Proposed Design DTS Reference
0.11 0.13 0.06 0.150.04
0.06
0.08
0.10
0.12
0.14
0.16
North East South West
SA
Solar Admittance
Proposed Reference DTS Reference
2.00 1.870.8
1.3
1.8
2.3
W/m
²K
Wall-glazing U-Value - ALL
DTS Reference Proposed Design
126 12560
80
100
120
140
AC
En
erg
y
AC Energy Value
DTS Reference Proposed Design
FaçadeReport
By accessing or using this calculator, you agree to the following: While care has been taken in the preparation of this calcu lator, it may not be complete or up-to-date. You can ensure that you are using a complete and up-to-date version by checking the Australian Building Codes Board website (www.abcb.gov.au). The Australian Building Codes Board, the Commonwealth of Australia and States and Territories of Australia do not accept any liability, including liability for negligence, for any loss (howsoever caused) , damage, injury, expense or cost incurred by any person as a result of accessing, using or relying upon this calculator, to the maximum extent permitted by law. No representation or warranty is made or given as to the currency, accuracy, reliability, merc hantability, fitness for any purpose or completeness of this calculator or any information which may appear on any linked websites, or in other linked information sources, and all such representations and warranties are excluded to the extent permitted by law. This calculator i s not legal or professional advice. Persons rely upon this calculator entirely at their own risk and must take responsibility for assessing the relevance and accuracy of the information in relation to their particular circumstances.
© Commonwealth of Australia and the States and Territories of Australia 2019, published by the Australian Building Codes Board.The material in this calculator is licensed under a Creative Commons Attribution-No Derivatives—4.0 International licence, with the exception of third party materials and any trade marks. It is provided for general information only and without warranties of any kind. You may not make derivatives of this calculator, but may only use a verbatim copy. More information on this CC BY ND licence is set out at the Creative Commons Website. For information regarding this calculator, see www.abcb.gov.au.
DTS ConstructionValues
Eden Gardens Lane Cove - Building C -Neighbourhood Shops Uniform Solution
[KUTOOLSFOREXCEL]
Compliant Solution = Date Non-Compliant Solution = 12/11/2020
Name Method 2Bianca Bulsara North East South West All
Company Wall-glazing U-Value (W/m².K) 1.96 1.25 1.96 1.83
ADP Consulting 2.00 2.00 2.00 2Solar Admittance 0.13 0.09 0.13
Position 0.13 0.13 0.13Sustainabilty Engineer AC Energy Value 37
36.8363294Building Name / AddressFunction Centre - lane coveMacquarie park
Method 1Building State
NSW
Climate Zone
Building Classification
Storeys Above Ground Method 20
North East South West
Glazing Area (m²) 89 4.004 53.3064
Glazing to Façade Ratio 85% 11% 90%
Methodology
Average Glazing U-Value (W/m².K) 2.13 5.80 2.07
Average Glazing SHGC 0.16 0.81 0.16
Wall Area (m²) 15.7065 33.956 5.7
Methodology
Average Wall R-value (m²K/W) 1.00 1.40 1.00
Solar Absorptance
IMPORTANT NOTICE AND DISCLAIMER IN RESPECT OF THIS CALCULATOR
Project Details
0 + 0 + 0 +
0 + 0 +
North +
Wall Types
Glass Types
Glazing System Types
Frame Types 0 +
Wall >80% +
Wall Thickness
NCC Specification J1.5b
Wall Construction
Glazing References
Shading Systems
0 + 0 + 0 + 0
Wall <80% + Wall <80% + Wall >80% +
Wall + Wall + Wall + Wall +
0 +
Horizontal Horizontal
Climate Zone 5 - Warm
temperate
Project Summary
Method 1
Class 9b - public halls, function
rooms or the like
The summary below provides an overview of where compliance has been achieved for Specification J1.5a -
Calculation of U-Value and solar admittance - Method 1 (Single Aspect) and Method 2 (Multiple Apects).
Calculator
East + EastDoor + South + West + WestDoor +
Horizontal
AFRC (True module size)
Horizontal
0 +
1.96 1.25 1.960.8
1.3
1.8
2.3
North East South West
W/m
²K
Wall-glazing U-Value
Proposed Design DTS Reference
0.13 0.09 0.130.04
0.06
0.08
0.10
0.12
0.14
North East South West
SA
Solar Admittance
Proposed Reference DTS Reference
2.00 1.830.8
1.3
1.8
2.3
W/m
²K
Wall-glazing U-Value - ALL
DTS Reference Proposed Design
60
80
100
120
AC
En
erg
y
AC Energy Value
DTS Reference Proposed Design
FaçadeReport
By accessing or using this calculator, you agree to the following: While care has been taken in the preparation of this calcu lator, it may not be complete or up-to-date. You can ensure that you are using a complete and up-to-date version by checking the Australian Building Codes Board website (www.abcb.gov.au). The Australian Building Codes Board, the Commonwealth of Australia and States and Territories of Australia do not accept any liability, including liability for negligence, for any loss (howsoever caused) , damage, injury, expense or cost incurred by any person as a result of accessing, using or relying upon this calculator, to the maximum extent permitted by law. No representation or warranty is made or given as to the currency, accuracy, reliability, merc hantability, fitness for any purpose or completeness of this calculator or any information which may appear on any linked websites, or in other linked information sources, and all such representations and warranties are excluded to the extent permitted by law. This calculator i s not legal or professional advice. Persons rely upon this calculator entirely at their own risk and must take responsibility for assessing the relevance and accuracy of the information in relation to their particular circumstances.
© Commonwealth of Australia and the States and Territories of Australia 2019, published by the Australian Building Codes Board.The material in this calculator is licensed under a Creative Commons Attribution-No Derivatives—4.0 International licence, with the exception of third party materials and any trade marks. It is provided for general information only and without warranties of any kind. You may not make derivatives of this calculator, but may only use a verbatim copy. More information on this CC BY ND licence is set out at the Creative Commons Website. For information regarding this calculator, see www.abcb.gov.au.
DTS ConstructionValues
Eden Gardens Lane Cove - Building D - Function Centre Lower Ground Floor - Non-Uniform Solution
[KUTOOLSFOREXCEL]
Compliant Solution = Date Non-Compliant Solution = 12/11/2020
Name Method 2Bianca Bulsara North East South West All
Company Wall-glazing U-Value (W/m².K) 1.99 2.00 0.99 1.63 1.72
ADP Consulting 2.00 2.00 2.00 2.00 2Solar Admittance 0.13 0.13 0.04 0.10
Position 0.13 0.13 0.13 0.13Sustainabilty Engineer AC Energy Value 76
81.8677262Building Name / AddressFunction Centre - lane cove0
Method 1Building State
NSW
Climate Zone
Building Classification
Storeys Above Ground Method 20
North East South West
Glazing Area (m²) 16.092 143 3.978 62.5868
Glazing to Façade Ratio 22% 88% 5% 60%
Methodology
Average Glazing U-Value (W/m².K) 5.50 2.13 5.80 2.06
Average Glazing SHGC 0.59 0.16 0.81 0.16
Wall Area (m²) 57.071 19.33 69.185 42.4032
Methodology
Average Wall R-value (m²K/W) 1.00 1.00 1.40 1.00
Solar Absorptance
IMPORTANT NOTICE AND DISCLAIMER IN RESPECT OF THIS CALCULATOR
Calculator
East1 + East2 + East3 + South + West1 + West2 + West3 +
Horizontal
0 +
AFRC (True module size)
Horizontal
0 +
0 +
Climate Zone 5 - Warm
temperate
Project Summary
Method 1
Class 9b - public halls, function
rooms or the like
The summary below provides an overview of where compliance has been achieved for Specification J1.5a -
Calculation of U-Value and solar admittance - Method 1 (Single Aspect) and Method 2 (Multiple Apects).
Wall + Wall +
0 +
Horizontal Horizontal
Wall Thickness
NCC Specification J1.5b
Wall Construction
Glazing References
Shading Systems
0 + 0 + 0 + 0
Wall <80% + Wall <80% + Wall >80% +
Wall + Wall +
Project Details
0 + 0 + 0 + 0 +
0 + 0 + 0 +
North +
Wall Types
Glass Types
Glazing System Types
Frame Types 0 +
Wall >80% +
1.99 2.00 0.99 1.630.8
1.3
1.8
2.3
North East South West
W/m
²K
Wall-glazing U-Value
Proposed Design DTS Reference
0.13 0.13 0.04 0.100.04
0.06
0.08
0.10
0.12
0.14
North East South West
SA
Solar Admittance
Proposed Reference DTS Reference
2.00 1.720.8
1.3
1.8
2.3
W/m
²K
Wall-glazing U-Value - ALL
DTS Reference Proposed Design
82 7660
65
70
75
80
85
AC
En
erg
y
AC Energy Value
DTS Reference Proposed Design
FaçadeReport
By accessing or using this calculator, you agree to the following: While care has been taken in the preparation of this calcu lator, it may not be complete or up-to-date. You can ensure that you are using a complete and up-to-date version by checking the Australian Building Codes Board website (www.abcb.gov.au). The Australian Building Codes Board, the Commonwealth of Australia and States and Territories of Australia do not accept any liability, including liability for negligence, for any loss (howsoever caused) , damage, injury, expense or cost incurred by any person as a result of accessing, using or relying upon this calculator, to the maximum extent permitted by law. No representation or warranty is made or given as to the currency, accuracy, reliability, merc hantability, fitness for any purpose or completeness of this calculator or any information which may appear on any linked websites, or in other linked information sources, and all such representations and warranties are excluded to the extent permitted by law. This calculator i s not legal or professional advice. Persons rely upon this calculator entirely at their own risk and must take responsibility for assessing the relevance and accuracy of the information in relation to their particular circumstances.
© Commonwealth of Australia and the States and Territories of Australia 2019, published by the Australian Building Codes Board.The material in this calculator is licensed under a Creative Commons Attribution-No Derivatives—4.0 International licence, with the exception of third party materials and any trade marks. It is provided for general information only and without warranties of any kind. You may not make derivatives of this calculator, but may only use a verbatim copy. More information on this CC BY ND licence is set out at the Creative Commons Website. For information regarding this calculator, see www.abcb.gov.au.
DTS ConstructionValues
Eden Gardens Lane Cove - Building D - Function Centre Ground Floor - Non-Uniform Solution
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 17 February 2021 Rev: 02 18
Appendix B
Insulation Mark-up
© DKO Architecture (VIC) Pty LtdExcept as allowed under copyright act, no part of thisdrawing may be reproduced or otherwise dealt withwithout written permission of DKO Architecture.
CkdBy DescriptionDateRev.
Scale
RevisionDA104Drawing Number
12010307 Lane Cove Road,Macquarie Park, NSW2113
Lower GroundProject Name Lane Cove Project Number
Drawing NameProject Address
Date
Client Eden Gardens
DKO Architecture (Vic.) Pty Ltd90-94 Rokeby StreetCollingwood, VIC 3066T +61 3 8601 [email protected]: 61413783636
Prin
ted:
13/
02/2
021
9:3
7 PM
dKO
Tit
le B
lock
s_v2
1.pm
k M
:\_
_C
AD
TE
MPL
ATE
FIL
ES\
DK
O A
rchi
CA
D 2
1 Ti
tle
Pane
l\dK
O T
itle
Blo
cks_
v21.
pmk
1:400, 1:1@A113/02/2021
14/10/2020 PRE DA DRAFTRR & LS JL04/11/2020 PRE DA DRAFTRR, LS, JM JL13/02/2021 DA APPLICATIONRR, LS
864.15 m2
52.47 m2
57.67
24.28 m2
52.83 m2
219.03 m2
Air
Dis
char
ge
(Pro
pos
ed)
3.0
0 m
2
Main Switch Room
(Existing)21.72 m2
41.65 m2
+57,690
+57,690
5,468.88 m2 EXISTING
CarparkFan Room(Existing)16.12 m2
1,879.71 m2 NEW
23.60 m2
57.02 m2
MAINCOMMS ROOM
16.00 m2
173 Car Parking Spaces (existing)
LOA
DIN
G
Carpark SupplyAir Intake viaAbove Ground
Facade Openings
263.03 m2
FUNCTIONROOM 4
M M
UPUP
PLANT30.00 m2
3,20
0
+57,690
+57,690
+57,690
+57,690
+57,690
97.09 m2
42.52 m2
204.59 m2
140.72 m2
57.67
57.67
57.67
M H M M/H M M MHMM/HMM
215.75 m2
STAFF KITCHEN &LOUNGE
CELLAR
+57,690
SEWER PUMP
STATION16.00 m2
GREASE ARRESTOR
30.00 m2
COLDWATERPUMPS
20.00 m2
Gre
ase
Arr
esto
r3.
60
m2
SewerPump
2.54 m2
UNDER SLABSEWER HOLDING TANK
24.00 m2
NON-POTABLEWATER
PRESSURE15.00 m2
MAINSWITCHROOM
56.00 m2
Elec
23.60 m2
53 Car Parking Spaces(new)
LOBBY
14 H
OR
IZO
NTA
L =
28
10 STACKER x 10 =110
SKYLIGHT ABOVE
SECURITY/BLDG MANAGER'S
OFFICEWATER
FOUNTAIN&
SKYLIGHT
80 LOCKERS
9 MALE SHOWERS
EOTF
80 LOCKERS
9 FEMALE SHOWERS
ENTRY
M &
FA
MB
ULA
NT
WC
s
RE
PAIR
STA
TIO
N
EXIST.SERVICES
PRE-FUNCTION
SERVICES
STORE
PREPKITCHEN
LIFT
STAIR
LOBBY
IRO
NIR
ON
MAILROOM
KIT
CH
EN
& L
OC
KE
RS
WASTE
WASTELIFT
LIFT
STAIR
OUTDOORFUNCTIONS
FALL 1:5FALL1:8
FALL1:8
RA
MP
BO
TTO
M
Ele
c D
B B
oard
SHAREDAREA
OUTDOORCOURTYARD
CORE
18 x
240
LC
OM
MIN
GLE
DR
EC
YCLI
NG
BIN
S
18 x
240
L G
EN
ER
AL
WA
STE
BIN
S
UP
PLANT
5 No.MOTORCYCLES
4 CAR SHARESPACES
F F
6,66
510
,075
6,55
0
50,305
32,450
176.
49m
3
23°4
7'50
"
21.97m 39°59'50"
65.245m 106°16'40"
35.69m 110°16'20"
242.325m 196°16'40"
17.435m 5°00'10"
105.63m 34°52'50"
WA
LK W
AY
UN
ISE
XD
DA
RAMP
FZ BAL
40 BAL
29 BAL
19 BAL
12.5 BAL
0 4 8 12 16 20m
1. BUILDING D - FUNCTION CENTRELOWER GROUND FLOOR - Floor and Wall Insulation Mark-Up
Internal Wall InsulationTotal R1.4
External Wall/SpandrelInsulation Total >R1.0
Roof Insulation Total>R3.7 &Solar Absorptance<0.45
Floor Insulation TotalR2.0
Insulation Legend for New Additions
External Wall InsulationTotal >R1.4
1.
© DKO Architecture (VIC) Pty LtdExcept as allowed under copyright act, no part of thisdrawing may be reproduced or otherwise dealt withwithout written permission of DKO Architecture.
CkdBy DescriptionDateRev.
Scale
RevisionDA105Drawing Number
12010307 Lane Cove Road,Macquarie Park, NSW2113
Ground LevelProject Name Lane Cove Project Number
Drawing NameProject Address
Date
Client Eden Gardens
DKO Architecture (Vic.) Pty Ltd90-94 Rokeby StreetCollingwood, VIC 3066T +61 3 8601 [email protected]: 61413783636
Prin
ted:
16/
02/2
021
4:4
9 PM
dKO
Tit
le B
lock
s_v2
1.pm
k M
:\_
_C
AD
TE
MPL
ATE
FIL
ES\
DK
O A
rchi
CA
D 2
1 Ti
tle
Pane
l\dK
O T
itle
Blo
cks_
v21.
pmk
1:400, 1:1@A116/02/2021
14/10/2020 PRE DA DRAFTRR & LS JL04/11/2020 PRE DA DRAFTRR, LS, JM JL13/02/2021 DA APPLICATIONRR, LS
137.70 m2
32.82 m2
141.08 m2
120.20 m2
644.30 m2
155.22 m2
30.50 m2
1,508.40 m2
118.28 m2 115.96 m2
125.93 m2
181.42 m2
147.26 m2
182.39 m2
103.13 m2
70.6
7 m
2
DDA
M M
UPUP
DNDN
35,685
25,6
25
25,2
20
30,8005,80
0
19,395 1,600 300
15,250 6,500 9,050
14,030 15,400 7,555
19,9
00
12,0
65
+60,840
+60,840
+60,840
+60,840
+60,840
643.35 m2
61.9
7 m
2
62.0
7 m
2
46.35 m2
484.82 m2
61.69 m2 61.70 m2
40.09 m2
1:41:51:8
FALL 1:5FALL
1:8
FOYER
HO
RIZ
ON
TAL
BIK
ES
UN
DE
R S
TAIR
S
BAR
TERRACE
WALLCLIMBINGTICKETS
FALL1:8
RA
MP
BO
TTO
M
Elec DB Board
FOLD
-UP
DO
OR
FOLD-UPDOOR
FOLD-UPDOOR
FOLD
-UP
DO
OR
FOLD
-UP
DO
OR
FOLD
-UP
DO
OR
HO
RIZ
ON
TAL
BIK
ES
HO
RIZ
ON
TAL
BIK
ES
HORIZONTALBIKES
HEA
VY R
IGID
VEH
ICLE
UPRIGHT KERBGUTTER
BARRIERS
UPRIGHT KERB
UPRIGHT KERB
LIP
1:81:5
RA
MP
TOP
NE
W C
AN
OPY
OV
ER
M H M M/H M MM MHMM/HMM M
808.15 m2
RESTAURANT
ENTRY
OU
TDO
OR
DIN
NE
R D
ININ
G
CONCIERGE
+60,840
M-WC
PREPKITCHEN
FUNCTIONROOM 1
PRE-FUNCTION
FUNCTIONROOM 2
FUNCTION/BRIDALROOM 3
F-WC
DDA
M-WC F-WCLIFT
STAIR
LIFT
GARDENCENTRE
WASTE
FIRESERVICES
LOADING BAY
EG STORAGE
WATERFEATURE
12 x 1100L GENERALWASTE BINS
13 x 1100L CO-MINGLEDRECYCLING BINS
6 x 240L GARDENORGANICS
RECYCLING BINS
BIN LIFT /COMPACTOR
ZONE
UP
DN
UP
PUMP PUMPFCR
ROCKCLIMBINGPLATFORM
ABOVE
PATH FOREMERGENGY
VEHICLE
7,000
20,7
0045
,210
65,9
10
3,54
017
,950
28,000
21,335 14,350 7,550 78,285 7,860 11,405
36,985 7,840
12,8
90
37,2
85
183.12 m2
EXISTINGRAINWATER RE-USE TANK
EXISTING CARPARKEXHAUST
3.50 m2
EXISTING BOOSTERCUPBOARD
3.00 m2
311.04 m2
VOID
48 Car Parking Spaces
COMM.LOBBY
VOID OVER
VOID OVERCONCIERGE
SKYLIGHTABOVE EOT
ENTRY/EXIT
EXIT
F&B
SALES
AC
LIFTNEW
STAIREXIST.STAIR
VOIDTRAVELATOR
CA
NO
PYO
VE
R
OUTDOORLUNCH DINING
DDA
BAMBOOGARDEN
NEW 2 x KIOSKSUBSTATION
176.
49m
3
23°4
7'50
"
21.97m 39°59'50"
65.245m 106°16'40"
35.69m 110°16'20"
242.325m 196°16'40"
17.435m 5°00'10"
105.63m 34°52'50"
RED LINE OF EXIST.
RED LINE OF EXIST.
RED LINEOF EXIST.
RED LINEOF EXIST.
FIRE TANKS(2m W x 19m L x 2.5m H)TO BE CO-ORDINATED
EXISTING SUB-STATION TO BE
RELOCATED
EXISTING FPRTO BE
RELOCATED
RELOCATEDSUB STATION
EXISTINGCARPARKEXHAUST
SCR
EE
N
VOID OVERWAITING AREA
PEDESTRIANACCESS
VEHICLE ACCESS(TO BE REVIEWED &
CO-ORDINATED)
LANE COVE ROAD
CORE
6 Car ParkingSpaces
FIEL
D
PROPOSED.
SCR
EE
N
M-WC
F-WC
PROPOSED.
FZ BAL
40 BAL
29 BAL
19 BAL
12.5 BAL
SECURITY GATELOCATION.
GATE TO BE DESIGNED.
SECURITY GATELOCATION.
GATE TO BE DESIGNED.
SECURITY GATELOCATION.
GATE TO BE DESIGNED.
GARDENCENTRE
TENANCY
GARDENCENTRE
TENANCY
NEIGHBOURHOODSHOP
GARDEN CENTRETENANCY
NEW CONCRETEWALL TO ENCASEEXIST. COLUMNS .
GARDEN CENTRE/NEIGHBOURHOOD SHOPS
NEIGHBOURHOODSHOP
NEIGHBOURHOODSHOP
F F
0 4 8 12 16 20m
Internal Wall InsulationTotal R1.4
External Wall/SpandrelInsulation Total >R1.0
Roof Insulation Total>R3.7 &Solar Absorptance<0.45
Floor Insulation TotalR2.0
Insulation Legend for New Additions
External Wall InsulationTotal >R1.4
1. BUILDING D - FUNCTION CENTREGROUND FLOOR - Floor and Wall Insulation Mark-Up
2. BUILDING C - NEIGHBOURHOOD SHOPS GROUND FLOOR - Floor and Wall Insulation Mark-Up
3. BUILDING B - RESTAURANT GROUND FLOOR - Floor and Wall Insulation Mark-Up
1.
3.
2.
© DKO Architecture (VIC) Pty LtdExcept as allowed under copyright act, no part of thisdrawing may be reproduced or otherwise dealt withwithout written permission of DKO Architecture.
CkdBy DescriptionDateRev.
Scale
RevisionDA105Drawing Number
12010307 Lane Cove Road,Macquarie Park, NSW2113
Ground LevelProject Name Lane Cove Project Number
Drawing NameProject Address
Date
Client Eden Gardens
DKO Architecture (Vic.) Pty Ltd90-94 Rokeby StreetCollingwood, VIC 3066T +61 3 8601 [email protected]: 61413783636
Prin
ted:
16/
02/2
021
4:4
9 PM
dKO
Tit
le B
lock
s_v2
1.pm
k M
:\_
_C
AD
TE
MPL
ATE
FIL
ES\
DK
O A
rchi
CA
D 2
1 Ti
tle
Pane
l\dK
O T
itle
Blo
cks_
v21.
pmk
1:400, 1:1@A116/02/2021
14/10/2020 PRE DA DRAFTRR & LS JL04/11/2020 PRE DA DRAFTRR, LS, JM JL13/02/2021 DA APPLICATIONRR, LS
137.70 m2
32.82 m2
141.08 m2
120.20 m2
644.30 m2
155.22 m2
30.50 m2
1,508.40 m2
118.28 m2 115.96 m2
125.93 m2
181.42 m2
147.26 m2
182.39 m2
103.13 m2
70.6
7 m
2
DDA
M M
UPUP
DNDN
35,685
25,6
25
25,2
20
30,8005,80
0
19,395 1,600 300
15,250 6,500 9,050
14,030 15,400 7,555
19,9
00
12,0
65
+60,840
+60,840
+60,840
+60,840
+60,840
643.35 m2
61.9
7 m
2
62.0
7 m
2
46.35 m2
484.82 m2
61.69 m2 61.70 m2
40.09 m2
1:41:51:8
FALL 1:5FALL
1:8
FOYER
HO
RIZ
ON
TAL
BIK
ES
UN
DE
R S
TAIR
S
BAR
TERRACE
WALLCLIMBINGTICKETS
FALL1:8
RA
MP
BO
TTO
M
Elec DB Board
FOLD
-UP
DO
OR
FOLD-UPDOOR
FOLD-UPDOOR
FOLD
-UP
DO
OR
FOLD
-UP
DO
OR
FOLD
-UP
DO
OR
HO
RIZ
ON
TAL
BIK
ES
HO
RIZ
ON
TAL
BIK
ES
HORIZONTALBIKES
HEA
VY R
IGID
VEH
ICLE
UPRIGHT KERBGUTTER
BARRIERS
UPRIGHT KERB
UPRIGHT KERB
LIP
1:81:5
RA
MP
TOP
NE
W C
AN
OPY
OV
ER
M H M M/H M MM MHMM/HMM M
808.15 m2
RESTAURANT
ENTRY
OU
TDO
OR
DIN
NE
R D
ININ
G
CONCIERGE
+60,840
M-WC
PREPKITCHEN
FUNCTIONROOM 1
PRE-FUNCTION
FUNCTIONROOM 2
FUNCTION/BRIDALROOM 3
F-WC
DDA
M-WC F-WCLIFT
STAIR
LIFT
GARDENCENTRE
WASTE
FIRESERVICES
LOADING BAY
EG STORAGE
WATERFEATURE
12 x 1100L GENERALWASTE BINS
13 x 1100L CO-MINGLEDRECYCLING BINS
6 x 240L GARDENORGANICS
RECYCLING BINS
BIN LIFT /COMPACTOR
ZONE
UP
DN
UP
PUMP PUMPFCR
ROCKCLIMBINGPLATFORM
ABOVE
PATH FOREMERGENGY
VEHICLE
7,000
20,7
0045
,210
65,9
10
3,54
017
,950
28,000
21,335 14,350 7,550 78,285 7,860 11,405
36,985 7,840
12,8
90
37,2
85
183.12 m2
EXISTINGRAINWATER RE-USE TANK
EXISTING CARPARKEXHAUST
3.50 m2
EXISTING BOOSTERCUPBOARD
3.00 m2
311.04 m2
VOID
48 Car Parking Spaces
COMM.LOBBY
VOID OVER
VOID OVERCONCIERGE
SKYLIGHTABOVE EOT
ENTRY/EXIT
EXIT
F&B
SALES
AC
LIFTNEW
STAIREXIST.STAIR
VOIDTRAVELATOR
CA
NO
PYO
VE
R
OUTDOORLUNCH DINING
DDA
BAMBOOGARDEN
NEW 2 x KIOSKSUBSTATION
176.
49m
3
23°4
7'50
"
21.97m 39°59'50"
65.245m 106°16'40"
35.69m 110°16'20"
242.325m 196°16'40"
17.435m 5°00'10"
105.63m 34°52'50"
RED LINE OF EXIST.
RED LINE OF EXIST.
RED LINEOF EXIST.
RED LINEOF EXIST.
FIRE TANKS(2m W x 19m L x 2.5m H)TO BE CO-ORDINATED
EXISTING SUB-STATION TO BE
RELOCATED
EXISTING FPRTO BE
RELOCATED
RELOCATEDSUB STATION
EXISTINGCARPARKEXHAUST
SCR
EE
N
VOID OVERWAITING AREA
PEDESTRIANACCESS
VEHICLE ACCESS(TO BE REVIEWED &
CO-ORDINATED)
LANE COVE ROAD
CORE
6 Car ParkingSpaces
FIEL
D
PROPOSED.
SCR
EE
N
M-WC
F-WC
PROPOSED.
FZ BAL
40 BAL
29 BAL
19 BAL
12.5 BAL
SECURITY GATELOCATION.
GATE TO BE DESIGNED.
SECURITY GATELOCATION.
GATE TO BE DESIGNED.
SECURITY GATELOCATION.
GATE TO BE DESIGNED.
GARDENCENTRE
TENANCY
GARDENCENTRE
TENANCY
NEIGHBOURHOODSHOP
GARDEN CENTRETENANCY
NEW CONCRETEWALL TO ENCASEEXIST. COLUMNS .
GARDEN CENTRE/NEIGHBOURHOOD SHOPS
NEIGHBOURHOODSHOP
NEIGHBOURHOODSHOP
F F
0 4 8 12 16 20m
2. BUILDING C - NEIGHBOURHOOD SHOPS GROUND FLOOR - Roof Insulation Mark-Up
1. BUILDING D - FUNCTION CENTREGROUND FLOOR - Roof Insulation Mark-Up
Internal Wall InsulationTotal R1.4
External Wall/SpandrelInsulation Total >R1.0
Roof Insulation Total>R3.7 &Solar Absorptance<0.45
Floor Insulation TotalR2.0
Insulation Legend for New Additions
External Wall InsulationTotal >R1.4
3. BUILDING B - RESTAURANT GROUND FLOOR - Roof Insulation Mark-Up
1.
3.
2.
Project: SYD0684 Eden Gardens
Report: NCC 2019 Section J
Date: 17 February 2021 Rev: 02 19
Melbourne
Level 11, 60 Albert Road
South Melbourne VIC 3205
T. 03 9521 1195
Sydney
Level 3, 8 Spring Street
Sydney NSW 2000
T. 02 8203 5447
Brisbane
Ground Floor, 102 Adelaide Street
Brisbane QLD 4000
T. 07 3088 4022
adpconsulting.com.au
Creating great environments with great people
Top Related