DEVELOPMENT APPLICATION
D-2019/001384
APPLICANT: D Webster
PROPOSAL: Temporary Access Road & Earth Works
LOCATION: 672 East Derwent Highway & Lantana Road, RISDON
VALE
RELEVANT PLANNING SCHEME: Clarence Interim Planning Scheme 2015
ADVERTISING EXPIRY DATE: 31 July 2019
In addition to the Application Form(s), Certificate of Title(s) and any associated
consent documents the following information is available on request:
• Planning Report
The relevant plans and documents can be inspected at the Council offices, 38 Bligh
Street, Rosny Park, during normal office hours until 31 July 2019.
Any person may make representations about the application to the General Manager,
by writing to PO Box 96, Rosny Park, 7018 or by electronic mail to
[email protected]. Representations must be received by Council on or before
31 July 2019.
To enable Council to contact you if necessary, would you please also include a day
time contact number in any correspondence you may forward.
Any personal information submitted is covered by Council’s privacy policy, available
at www.ccc.tas.gov.au or at the Council offices.
U
U
U
U
DESIGNED BY
PLOT DATE
PLOT DETAILS
DRAWN BYSCALES @ A3 PROJECT NO.
REVISIONDWG NO.
TITLEPROJECTAccepted
This document must be signed “Approved” by JMG to authorise it for use. JMG accept no liability whatsoever for unauthorised or unlicensed use.
DO NOT SCALE. Use only figured dimensions. Locations of structure, fittings, servicesetc on this drawing are indicative only. CONTRACTOR to check Architects & other projectdrawings for co-ordination between structure, fabric, fixtures, fittings, services etc.CONTRACTOR to site check all dimensions and exact locations of all items. JMG accepts noresponsibility for dimensional information scaled or digitally derived from this document.
The recipient client is licensed to use this drawing for itscommissioned purpose subject to authorisation per note above.Unlicensed use is prohibited. Unlicensed parties may not copy,reproduce or retransmit or amend this document or any part of thisdocument without JMG's prior written permission. Amendment ofthis document is prohibited by any party other than JMG. JMGreserve the right to revoke the licence for use of this document.
Copyright © All rights reserved. This drawing and its intellectualcontent remains the intellectual property of JOHNSTONE McGEE &GANDY PTY LTD (JMG).
Date
Approved Date
Accepted
Date
(Team Leader)
(Discipline Head)
(Group Manager)
07/03/2019
J185108SH PLANS-ROADS & SW.DWG49-51 Elizabeth Street, Launceston, Tas
ACN 009 547 139
117 Harrington Street, Hobart, Tas (03) 6231 2555
(03) 6334 5548
www.jmg.net.au [email protected] [email protected]
REMARKDATEREV
Johnstone McGee & Gandy Pty. Ltd.
ABN 76 473 834 852
NOT FOR CONSTRUCTION
TENDER ISSUE
Engineers & Planners
SAFETY IN DESIGN REPORTIn accordance with the Workplace Health & Safety Acts and Regulations JMGhave considered the potential hazards and risks that are specific to this design.
The following risks which are unique tothis design have been identified:
This report does not relieve contractors from their responsibilities under the Act to identify,report, mitigate and manage all aspects of risk and safety.
C. PURDON
C. PURDON
G. ATHERTON
T1
1:500 B. LOCKEB. LOCKE
C02
J185108SHGENERAL ARRANGEMENTTEMPORARY ACCESS ROAD
EARLY WORKSSOUTHERN REMAND CENTRERISDON PRISON
NIL
THIS IS A COLOR A3 DRAWING AND
MUST BE REPRODUCED IN COLOR
AT ALL TIMES
1100
BEFORE YOU DIG
DIAL
www.dialbeforeyoudig.com.au
·····
DESIGNED BY
PLOT DATE
PLOT DETAILS
DRAWN BYSCALES @ A3 PROJECT NO.
REVISIONDWG NO.
TITLEPROJECTAccepted
This document must be signed “Approved” by JMG to authorise it for use. JMG accept no liability whatsoever for unauthorised or unlicensed use.
DO NOT SCALE. Use only figured dimensions. Locations of structure, fittings, servicesetc on this drawing are indicative only. CONTRACTOR to check Architects & other projectdrawings for co-ordination between structure, fabric, fixtures, fittings, services etc.CONTRACTOR to site check all dimensions and exact locations of all items. JMG accepts noresponsibility for dimensional information scaled or digitally derived from this document.
The recipient client is licensed to use this drawing for itscommissioned purpose subject to authorisation per note above.Unlicensed use is prohibited. Unlicensed parties may not copy,reproduce or retransmit or amend this document or any part of thisdocument without JMG's prior written permission. Amendment ofthis document is prohibited by any party other than JMG. JMGreserve the right to revoke the licence for use of this document.
Copyright © All rights reserved. This drawing and its intellectualcontent remains the intellectual property of JOHNSTONE McGEE &GANDY PTY LTD (JMG).
Date
Approved Date
Accepted
Date
(Team Leader)
(Discipline Head)
(Group Manager)
07/03/2019
J185108SH PLANS-ROADS & SW.DWG49-51 Elizabeth Street, Launceston, Tas
ACN 009 547 139
117 Harrington Street, Hobart, Tas (03) 6231 2555
(03) 6334 5548
www.jmg.net.au [email protected] [email protected]
REMARKDATEREV
Johnstone McGee & Gandy Pty. Ltd.
ABN 76 473 834 852
NOT FOR CONSTRUCTION
TENDER ISSUE
Engineers & Planners
SAFETY IN DESIGN REPORTIn accordance with the Workplace Health & Safety Acts and Regulations JMGhave considered the potential hazards and risks that are specific to this design.
The following risks which are unique tothis design have been identified:
This report does not relieve contractors from their responsibilities under the Act to identify,report, mitigate and manage all aspects of risk and safety.
C. PURDON
C. PURDON
G. ATHERTON
T1
1:500 B. LOCKEB. LOCKE
C03
J185108SHROAD ALIGNMENT PROFILETEMPORARY ACCESS ROAD
EARLY WORKSSOUTHERN REMAND CENTRERISDON PRISON
NIL
DESIGNED BY
PLOT DATE
PLOT DETAILS
DRAWN BYSCALES @ A3 PROJECT NO.
REVISIONDWG NO.
TITLEPROJECTAccepted
This document must be signed “Approved” by JMG to authorise it for use. JMG accept no liability whatsoever for unauthorised or unlicensed use.
DO NOT SCALE. Use only figured dimensions. Locations of structure, fittings, servicesetc on this drawing are indicative only. CONTRACTOR to check Architects & other projectdrawings for co-ordination between structure, fabric, fixtures, fittings, services etc.CONTRACTOR to site check all dimensions and exact locations of all items. JMG accepts noresponsibility for dimensional information scaled or digitally derived from this document.
The recipient client is licensed to use this drawing for itscommissioned purpose subject to authorisation per note above.Unlicensed use is prohibited. Unlicensed parties may not copy,reproduce or retransmit or amend this document or any part of thisdocument without JMG's prior written permission. Amendment ofthis document is prohibited by any party other than JMG. JMGreserve the right to revoke the licence for use of this document.
Copyright © All rights reserved. This drawing and its intellectualcontent remains the intellectual property of JOHNSTONE McGEE &GANDY PTY LTD (JMG).
Date
Approved Date
Accepted
Date
(Team Leader)
(Discipline Head)
(Group Manager)
07/03/2019
J185108SH PLANS-ROADS & SW.DWG49-51 Elizabeth Street, Launceston, Tas
ACN 009 547 139
117 Harrington Street, Hobart, Tas (03) 6231 2555
(03) 6334 5548
www.jmg.net.au [email protected] [email protected]
REMARKDATEREV
Johnstone McGee & Gandy Pty. Ltd.
ABN 76 473 834 852
NOT FOR CONSTRUCTION
TENDER ISSUE
Engineers & Planners
SAFETY IN DESIGN REPORTIn accordance with the Workplace Health & Safety Acts and Regulations JMGhave considered the potential hazards and risks that are specific to this design.
The following risks which are unique tothis design have been identified:
This report does not relieve contractors from their responsibilities under the Act to identify,report, mitigate and manage all aspects of risk and safety.
C. PURDON
C. PURDON
G. ATHERTON
T1
1:500 B. LOCKEB. LOCKE
C04
J185108SHCROSS SECTIONS SHEET 1TEMPORARY ACCESS ROAD
EARLY WORKSSOUTHERN REMAND CENTRERISDON PRISON
NIL
DESIGNED BY
PLOT DATE
PLOT DETAILS
DRAWN BYSCALES @ A3 PROJECT NO.
REVISIONDWG NO.
TITLEPROJECTAccepted
This document must be signed “Approved” by JMG to authorise it for use. JMG accept no liability whatsoever for unauthorised or unlicensed use.
DO NOT SCALE. Use only figured dimensions. Locations of structure, fittings, servicesetc on this drawing are indicative only. CONTRACTOR to check Architects & other projectdrawings for co-ordination between structure, fabric, fixtures, fittings, services etc.CONTRACTOR to site check all dimensions and exact locations of all items. JMG accepts noresponsibility for dimensional information scaled or digitally derived from this document.
The recipient client is licensed to use this drawing for itscommissioned purpose subject to authorisation per note above.Unlicensed use is prohibited. Unlicensed parties may not copy,reproduce or retransmit or amend this document or any part of thisdocument without JMG's prior written permission. Amendment ofthis document is prohibited by any party other than JMG. JMGreserve the right to revoke the licence for use of this document.
Copyright © All rights reserved. This drawing and its intellectualcontent remains the intellectual property of JOHNSTONE McGEE &GANDY PTY LTD (JMG).
Date
Approved Date
Accepted
Date
(Team Leader)
(Discipline Head)
(Group Manager)
07/03/2019
J185108SH PLANS-ROADS & SW.DWG49-51 Elizabeth Street, Launceston, Tas
ACN 009 547 139
117 Harrington Street, Hobart, Tas (03) 6231 2555
(03) 6334 5548
www.jmg.net.au [email protected] [email protected]
REMARKDATEREV
Johnstone McGee & Gandy Pty. Ltd.
ABN 76 473 834 852
NOT FOR CONSTRUCTION
TENDER ISSUE
Engineers & Planners
SAFETY IN DESIGN REPORTIn accordance with the Workplace Health & Safety Acts and Regulations JMGhave considered the potential hazards and risks that are specific to this design.
The following risks which are unique tothis design have been identified:
This report does not relieve contractors from their responsibilities under the Act to identify,report, mitigate and manage all aspects of risk and safety.
C. PURDON
C. PURDON
G. ATHERTON
T1
1:500 B. LOCKEB. LOCKE
C05
J185108SHCROSS SECTIONS SHEET 2TEMPORARY ACCESS ROAD
EARLY WORKSSOUTHERN REMAND CENTRERISDON PRISON
NIL
S
S
S
S
S
S
S
S
S
S
S
SS
SS
SS
SS
SS
SS
SS
SS
OH/E
LEC
OH/E
LEC
OH/E
LEC
OH/E
LEC
OH/E
LEC
SWSW
SWSW
SW
S
S
SS
SS
SS
SS
SS
SS
SWSW
SW
SWSW
SWSW
SWSW
SWSW
SWSW
SWSW
SWSW
SWSW
SWSW
SW
34
36
38
40
42 42
NEW TEMPORARY ACCESS ROAD CONSTRUCTED DURING PRELIMINARY WORKS
NEW SOUTHEN REMAND CENTRE COMPOUND
MARY HUTCHINSON WOMEN'S PRISON
RPC
GATEHOUSE &SALLY PORT
3.4m HIGH ELECTRIFIED FENCE
1.5m HIGH CYCLONE FENCE
RON BARWICK
KEERIA ROAD
LANTANA ROAD
EAST DERWENT HIGHW
AY
GRASSTREE
HILL ROAD
LOCATION AALL TOPSOIL REMOVED FROM AREA 1 AND AREA 2 FOR THE NEW SOUTHERN REMAND CENTRE SITE TO BE LOCATED HERE
PRELIMINARY
SCALE @ A1
CHECKED
DRAWN
DATEJOB NUMBER
PROJECT ADDRESS
PRINCIPAL
PROJECT TITLE
DRAWING
REVISIONS
KEYPLAN
1 : 1000
PRELIMINARY WORKS LOCATIONPLAN
1875
DEPARTMENT OF JUSTICE
FEB 2019
KM
ANA000
EAST DERWENT HIGHWAYRISDON VALE TAS 7016
SOUTHERN REMAND CENTREPROGRAM
0 50m10 20 30 40
1 : 1000
PRELIMINARY WORKS - LOCATION PLAN01
S
S
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
OH/E
LEC
OH/E
LEC
OH/E
LEC
OH/E
LEC
OH/E
LEC
SWSW
SW
SWSW
S
S
S
S
S
S
S
S
S
S
S
S
S
S
SWSW
SW
SWSW
SWSW
SWSW
SWSW
SWSW
SWSW
SWSW
SWSW
SWSW
SW
34
36
38
40
42 42
EXIS
TING
ELE
CTRI
C FE
NCE
TYPE
E46
EXIS
TING
PER
IMET
ER S
ECUR
ITY
FENC
E TY
PE P
B
EXIS
TING
DEM
ARCA
TION
FEN
CE T
YPE
D1
EXIS
TING
ELE
CTRI
C FE
NCE
TYPE
E30
EXISTING ELECTRIC FENCE TYPE E45
EXISTING DEMARCATION FENCE TYPE CW24
NEW TEMPORARY ACCESS ROAD. REFER TO CIVIL ENGINEER'S DRAWINGS
SEWERMANHOLE
ELEC. PIT
ELEC. TURRET
CLEAR EXISTING PLANTINGTO MAKE WAY FOR NEW ACCESS ROAD
NEW SOUTHEN REMAND CENTRE COMPOUND
MARY HUTCHINSON WOMEN'S PRISON
RPC
GATEHOUSE
SALLY PORT
KEERIA ROAD
LANTANA ROAD
EXISTING 3.4m HIGH ELECTRIFIED FENCE TO REMAIN. MAINTAIN FENCE INTEGRITY WHEN REMOVING TOPSOIL
EXISTING 1.5m HIGH CYCLONE FENCE TO REMAIN. MAINTAIN FENCE INTEGRITY WHEN REMOVING TOPSOIL
3.4m HIGH ELECTRIFIED FENCE
1.5m HIGH CYCLONE FENCE
EXISTING ROADWAY TO REMAIN.
REMOVE TOPSOIL FROM HATCHED AREA TO A DEPTH OF 400mm. RELOCATE TOPSOIL TO LOCATION A ON DRAWING A000
AREA 1
REMOVE TOPSOIL FROM HATCHED AREA TO A DEPTH OF 400mmRELOCATE TOPSOIL TO LOCATION A ON DRAWING A000
AREA 2
0 25m5 10 15 20
PRELIMINARY
SCALE @ A1
CHECKED
DRAWN
DATEJOB NUMBER
PROJECT ADDRESS
PRINCIPAL
PROJECT TITLE
DRAWING
REVISIONS
KEYPLAN
1 : 500
PRELIMINARY WORKS SITEPLAN
1875
DEPARTMENT OF JUSTICE
FEB 2019
KM
ANA001
EAST DERWENT HIGHWAYRISDON VALE TAS 7016
SOUTHERN REMAND CENTREPROGRAM
1 : 500
PRELIMINARY WORKS - SITE PLAN01
Top Related