8/12/2019 Control Valves Specification Sheet.pdf
1/2
Control Valves Specification SheetCustomer: Puffer ColombiaContact: Contact:Customer Reference: Sales Office Reference: Lead Time:Item: Rev: Qty: 1 Quote: Rev:Tags: Date Last Modified:Description:Service Description:
1 Fluid: Crit. Pres. PC:
SERVICE CONDITIONS Units:2 Mass flow rate (w)3 Inlet Pressure (P1)4 Outlet Pressure (P2)5 Temperature (T1)6 Inlet fluid density (Rho1)7 Specific heats ratio (gamma)8 Dynamic Viscosity (Mu)9 Sizing Coefficient (Cv)
10 % Open11 (Allowed / Calculated) / / / /12
PIPE LINE 53 ACTUATOR Type:13 Size, Schedule In: 54 Mfg/Model:14 Size, Schedule Out: 55 Size: Eff Area:15 Insulation: 56 On/Off: Modulating:16 VALVE BODY/BONNET Type: 57 Spring Action:17 Size: ANSI 58 Max Allow Press:18 Max Press/Temp: 59 Min Req'd Press:19 Mfg/Model: 60 Available Air Supply Pressure20 Body/Bonnet Matl: 61 Max: Min:21 Liner Matl/ID: 62 Bench Range:22 End Connection In: 63 Act Orientation:23 End Connection Out: 64 Handwheel Type:24 Flg Face Finish: 65 Air Failure Valve: Set at:25 End Ext/Matl: 6626 Flow Direction: 67 Input Signal:27 BONNET Type: 68 POSITIONER Type:28 Lub-Iso Valve: Lube: 69 Mfg/Model:
29 Packing Material: 70 Incr Signal Output:30 Packing Type: 71 Gauges: By-Pass:31 72 Cam Characteristic:32 TRIM Type: 7333 Size: Travel: SWITCHES34 Characteristic: 74 Type: Qty:35 Balanced/Unbalanced: 75 Mfg/Model:36 Rated Cv: Fl: Xt: 76 Contacts/Rating:37 Material: 77 Actuation Points:38 Seat Material: 7839 Cage Material: AIRSET40 Stem Material: 79 Mfg/Model:41 80 Set Pressure:42 81 Filter: Gauges:
SPECIAL ACCESS. 82
43 NEC Class: Group: Div: 83 TESTS Hydro Press:44 84 ANSI/FCI Leak Class:45 8546 8647 Rev Date Revision Orig App4849505152
8/12/2019 Control Valves Specification Sheet.pdf
2/2
ISA Regulator Specification Sheet
Sheet ____ Of _____
Customer Spec No: Rev:
Contact Contact
Customer Reference Sales Office Reference Contract: Date:
Item 4 Rev Qty 1 Quote RevTags Date Last Modified Req: PO:
Description
Price Each $0.00 USD Total Price $0.00 USD Lead Time By: Chkd Appr:Service Description
GENERAL
1. Tag No2. Service
3. Line No./Vessel No.
4. Line Size/Sched No.
5. Function
BODY
6. Type Of Body
7. Body Size Port Size
8. Guiding No Of Ports
9. End Conn & Rating /9A. Max Inlet Pressure
9B. Max Temp
10. Body Material
11. Packing Material
12. Lubricator Iso Valve
13. Seal Type
14. Trim Form/Type
15. Trim Material16. Seat Material
17. Required Seat Tightness
18. Max Allow Sound Level dBA
ACTUATOR/PILOT
19. Type Of Actuator
20. Pilot
21. Supply To Pilot
22. Self Cont Ext Conn
23. Main Diaph Matl Pilot Diaph Matl
24. Diaphragm Rating
25. Spring Range
26. Set Point 28. Fit Reg Supply Gage
27. Spring Case Matl 29. Line Strainer
27A. Spring Case Vent Tapped 30. Housing Vent
27B. Lower Casing Matl 31. Internal Relief
27C. Pilot Spg Case Vent Tapped 32. Filter
27D. Press Loading Reg 33. Pilot Supply Reg
27E. Press Load Reg Spg Vent Tapped 33A. Pilot Supply Filter
27F. Max Outlet Pressure 33B Tubing/Fittings
SERVICECONDITIONS
Fluid
UnitsGas Flow Rate(Qq)
Inlet Pressure(P1)
Outlet Pressure(P2)
Temperature(T1)
M/Gg
Specific heats ratio(gamma)
DynamicViscosity(Mu)
Sizing Coefficient(Cv)Calculated Noise
Level dBA
Notes PRESSURE CONTROL VALVESPILOTS and REGULATORSNO By Date Revision
Top Related