8/12/2019 Control Valves Specification Sheet.pdf

1/2

Control Valves Specification SheetCustomer: Puffer ColombiaContact: Contact:Customer Reference: Sales Office Reference: Lead Time:Item: Rev: Qty: 1 Quote: Rev:Tags: Date Last Modified:Description:Service Description:

1 Fluid: Crit. Pres. PC:

SERVICE CONDITIONS Units:2 Mass flow rate (w)3 Inlet Pressure (P1)4 Outlet Pressure (P2)5 Temperature (T1)6 Inlet fluid density (Rho1)7 Specific heats ratio (gamma)8 Dynamic Viscosity (Mu)9 Sizing Coefficient (Cv)

10 % Open11 (Allowed / Calculated) / / / /12

PIPE LINE 53 ACTUATOR Type:13 Size, Schedule In: 54 Mfg/Model:14 Size, Schedule Out: 55 Size: Eff Area:15 Insulation: 56 On/Off: Modulating:16 VALVE BODY/BONNET Type: 57 Spring Action:17 Size: ANSI 58 Max Allow Press:18 Max Press/Temp: 59 Min Req'd Press:19 Mfg/Model: 60 Available Air Supply Pressure20 Body/Bonnet Matl: 61 Max: Min:21 Liner Matl/ID: 62 Bench Range:22 End Connection In: 63 Act Orientation:23 End Connection Out: 64 Handwheel Type:24 Flg Face Finish: 65 Air Failure Valve: Set at:25 End Ext/Matl: 6626 Flow Direction: 67 Input Signal:27 BONNET Type: 68 POSITIONER Type:28 Lub-Iso Valve: Lube: 69 Mfg/Model:

29 Packing Material: 70 Incr Signal Output:30 Packing Type: 71 Gauges: By-Pass:31 72 Cam Characteristic:32 TRIM Type: 7333 Size: Travel: SWITCHES34 Characteristic: 74 Type: Qty:35 Balanced/Unbalanced: 75 Mfg/Model:36 Rated Cv: Fl: Xt: 76 Contacts/Rating:37 Material: 77 Actuation Points:38 Seat Material: 7839 Cage Material: AIRSET40 Stem Material: 79 Mfg/Model:41 80 Set Pressure:42 81 Filter: Gauges:

SPECIAL ACCESS. 82

43 NEC Class: Group: Div: 83 TESTS Hydro Press:44 84 ANSI/FCI Leak Class:45 8546 8647 Rev Date Revision Orig App4849505152

8/12/2019 Control Valves Specification Sheet.pdf

2/2

ISA Regulator Specification Sheet

Sheet ____ Of _____

Customer Spec No: Rev:

Contact Contact

Customer Reference Sales Office Reference Contract: Date:

Item 4 Rev Qty 1 Quote RevTags Date Last Modified Req: PO:

Description

Price Each $0.00 USD Total Price $0.00 USD Lead Time By: Chkd Appr:Service Description

GENERAL

1. Tag No2. Service

3. Line No./Vessel No.

4. Line Size/Sched No.

5. Function

BODY

6. Type Of Body

7. Body Size Port Size

8. Guiding No Of Ports

9. End Conn & Rating /9A. Max Inlet Pressure

9B. Max Temp

10. Body Material

11. Packing Material

12. Lubricator Iso Valve

13. Seal Type

14. Trim Form/Type

15. Trim Material16. Seat Material

17. Required Seat Tightness

18. Max Allow Sound Level dBA

ACTUATOR/PILOT

19. Type Of Actuator

20. Pilot

21. Supply To Pilot

22. Self Cont Ext Conn

23. Main Diaph Matl Pilot Diaph Matl

24. Diaphragm Rating

25. Spring Range

26. Set Point 28. Fit Reg Supply Gage

27. Spring Case Matl 29. Line Strainer

27A. Spring Case Vent Tapped 30. Housing Vent

27B. Lower Casing Matl 31. Internal Relief

27C. Pilot Spg Case Vent Tapped 32. Filter

27D. Press Loading Reg 33. Pilot Supply Reg

27E. Press Load Reg Spg Vent Tapped 33A. Pilot Supply Filter

27F. Max Outlet Pressure 33B Tubing/Fittings

SERVICECONDITIONS

Fluid

UnitsGas Flow Rate(Qq)

Inlet Pressure(P1)

Outlet Pressure(P2)

Temperature(T1)

M/Gg

Specific heats ratio(gamma)

DynamicViscosity(Mu)

Sizing Coefficient(Cv)Calculated Noise

Level dBA

Notes PRESSURE CONTROL VALVESPILOTS and REGULATORSNO By Date Revision