Compressors for R134a115V 60Hz
C O M P R E S S O R S
Collection of Datasheets
R E F R I G E R A T I O N A N D A I R C O N D I T I O N I N G
2 CK.40.A5.22 July 2003
High Energy-optimizedCompressors
T-SeriesTTY5F Page 70TTY6F Page 72
N-SeriesNTY5.5FK Page 74NTY6FK Page 76NTY7FK Page 78NTY9FK Page 80NTY10FK Page 82NTX5.2FK Page 84NTX5.7FK Page 86NTX7.3FK Page 88
Standard Compressors
P-SeriesPL30F Page 12PL50F (LST) Page 14PL50F Page 16
T-SeriesTL2.5F Page 18TL3F Page 20TL4F Page 22TLS4.5F Page 24TF3F Page 26TF3.5F Page 28TFS4F Page 30TT2.5F Page 32
N-SeriesNF6FK Page 34NF7FK Page 36NF9FK Page 38NF9.5FK Page 40NF5.5FX Page 42NF7FX Page 44NF9FX Page 46NF10FX Page 48NF11FX Page 50NF6.1FX.2 Page 52NF7.3FX.2 Page 54NF8.4FX.2 Page 56
F-SeriesFF8.5FK Page 58
Energy-optimizedCompressors
T-SeriesTTE3FK Page 60TTE4F Page 62
N-SeriesNLE5.5F Page 64NLE6F Page 66NLE7F Page 68
Universal Compressors
T-SeriesTL2.5G Page 98TL4G (50/60Hz) Page 100
F-SeriesFF6GK Page 102FF7.5GK Page 104FF8.5GX Page 106FF10GX Page 108
S-SeriesSC12G Page 110SC15G Page 112SC18G Page 114
Tropical Compressors
T-SeriesTFS4.5FT (LBP) Page 90TFS4.5FT (LBP/MBP) Page 92
S-SeriesSC12FTX Page 94SC15FTX Page 96
July 2003 CK.40.A5.22 3
This collection of datasheets contains information on Danfoss hermetic refrigeration com-pressors for 115V especially designed for refrigeration systems using refrigerant R134a(CF
3-CH
2F).
The programme consists of the basic types PL, TF, TL, TT, NF, NL, NT, FF and SC.
The compressor designations are built up according to the following system:
PL FF SC
NF/NT NL
Compressordesign
PL
TF, TL, TT
NF, NL, NT
FF
SC
Optimizationlevel
BlankStandard energy level
SSemi-direct intake
EEnergy-optimized(optimized motor)
Y, XHigh Energy-optimized(high optimization level)
Compressorsize
Nominaldisplacement in
cm3
Exception:For PL
compressors thecapacity at
rating point isstated
Applicationrange
FR134a LBP/(MBP)
FTR134a LBP/(MBP) tropical
FKR134a LBP/(MBP) LST
FXR134a LBP/(MBP) HST
GR134a LBP/MBP/HBP
GKR134a LBP/MBP/HBP LST
GXR134a LBP/MBP/HBP HST
TF
NL
FF
NF
S
E
4.5
7
8.5
6.1
FT
F
GX
FX
Example
8238-2 8238-6
TF/TT TL
8238-3
8238-4
8238-13
8238-12
8238-11
Generation
Blank First
generation
2 Second
generation
3 Third
generation
etc.
2
1. General
1.1 Compressordesignations
4 CK.40.A5.22 July 2003
Compressors with the denominations PL, TFS, TLS, TTE, NLE, NF are designs with semi-direct intake. Compressors with the denominations TTY and NTY are designs with directintake. Please note that the suction and process connectors on all TFS, TLS, TTE and TTYcompressors have been interchanged as compared with the normal TL compressors.Using the wrong connector as suction connector on PL, TFS, TLS, TTE, NF, NL and NLEcompressors will lead to reduced capacity and efficiency.Using the wrong connector as suction connector on TTY and NTY is not allowed since thecompressor will not function.
All compressors have a green label with the typedesignation. This label has a blue stripe and thetext ’R134a’.
Danfoss compressors have a manufacturing date code stamping on the housing. The formmainly used recently is stamping into the top cover of the housing. On some compressorproduction lines the stamping has been changed to needle printing into the side of the housing.This is going to be introduced on all products.For a certain period 2 different codes, in needle printing and cover stamping, will be used inparallel. The coding is designed not to be mixed up with the previous version.
Example (recent date code):
L--4F-4400F-203E1157The first line states the model designation and the code no.L- = last letter (or last two letters) of the compressor type-4F- = nominal displacement and application4400 = 4 last digits in the code no.(- = position mark)The second line states the date of manufacture and internal Danfoss codes.F = manufacturing place (F = Germany, AL = Slovenia, AM = Mexico)20 = week 203 = 2003E = Friday (A = Monday etc.)115 = nominal voltage7 = internal Danfoss codeThe country of origin (manufacturing place) is also stamped on the compressor cover.
Example (new date code):
H49477 (6 characters)113A01B (7 characters)Composition of line 1H4947: Compressor type information (102H4947 = H4947)
7: internal Danfoss codeComposition of line 211: Production week
3: Production yearA: Production day
A = Monday, B = Tuesday, C = Wednesday, etc.01: Production hour 00 to 23 or shift code -1, -2, -3B: Danfoss Compressors internal production location code
A to G GermanyK to N SloveniaR, S Mexico
105G
5605
NLE5.5F115V~60HzLBP LST
8315
-3
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
ApplicationR134a
1.2 Design
1.3 Type label
1.4 Data stamping
July 2003 CK.40.A5.22 5
The build-in conditions (total height, weight, tube dimensions etc.) are specified in the in-dividual datasheets including dimensional sketches for the compressors.
Compressors with denominations ending with F are primarily designed for low evaporatingtemperatures (LBP Low Back Pressure/MBP Medium Back Pressure on small displacements)for use in refrigerators, freezers and similar applications in regions with stable supply voltage.
Compressors with denominations ending with FT are F-types designed for low evaporationtemperatures (LBP Low Back Pressure) for use in refrigerators, freezers and similar applica-tions operating in regions with unstable supply voltage.
Compressors with denominations ending with FK are F-types designed for low evaporationtemperatures with LST starting characteristics (capillary tube).
Compressors with denominations ending with FX are F-types designed for low evaporationtemperatures with HST starting characteristics (expansion valve).
Compressors with denominations ending with G are primarily designed for high evaporationtemperatures (HBP High Back Pressure) for use in liquid coolers, dehumidifiers, refrigerateddisplay counters, vending machines and similar applications. The compressors can also beused for ’Heavy Duty’ purposes at low evaporating temperatures for use in refrigerators, freezersand similar applications operating in regions with unstable supply voltage.
Compressors with denominations ending with GK are G-types designed for high evaporatingtemperatures with LST starting characteristics (capillary tube).
Compressors with denominations ending with GX are G-types designed for high evaporatingtemperatures with HST starting characteristics (expansion valve).
The table on page 6 shows the normally recommended applications as regards voltage/fre-quency, ambient temperature, evaporating temperature and necessary compressor cooling.The recommandations must be regarded as a guideline only as they presuppose a properdimensioning of the refrigeration system.
In order to secure a satisfying lifetime of the compressor, and to protect the compressoragainst overload, some design criteria for the appliances must be fulfilled.Both the condensing temperature and the compressor temperature should be kept as low aspossible. This can be done by using well-dimensioned condenser surfaces and by ensuringgood ventilation around the compressor under all operating conditions.In order to protect the compressor against overload, the compressor has to start and workproperly through pressure peaks obtained in the highest ambient temperature and lowest obligingvoltage. At peak load the condensing temperature must not exceed 158°F (70°C). The windingtemperature must not exceed 275°F (135°C).At stable operation conditions the condensing temperature must not exceed 140°F (60°C). Thewinding temperature must not exceed 257°F (125°C).These limitations secure protection of valves, gaskets, oil, and motor insulation
1.5 Compressordimensions
F
FT
FK
FX
G
GK
GX
2. Application range
2.1 Design limits
Condensing temperatureWinding temperature
6 CK.40.A5.22 July 2003
rosserpmoC ylppuSrewoP erutarepmettneibmA]zH/V[ )C°34(F°011
PBL PBM PBH
F
F03LP05/721-09 S S S
06/721-09 S S S
F05LP 06/721-301 S S
F4-3-5.2LT 06/721-301 S S
F5.4SLT 06/721-301 S
F5.3-3FT 06/531-59 S
F4SFT 06/531-59 S
F5.2TT 06/721-301 S
KF3ETT 06/721-301 S
F4ETT 06/721-301 *S
F6-5YTT 06/721-301 *S
F7-6-5.5ELN 06/721-301 *S
TF
TF5.4SFT )PBL( 06/531-59 S
TF5.4SFT )PBM/PBL( 06/531-59 F1 F1
XTF21CS 06/531-59 F2 ** F2 **
XTF51CS
06/531-59 F2 F2
05/011-09 F2 F2
06/011-09 F2 F2
KF
KF7-6FN 06/531-59 F1 )S:C°83( F1 )S:C°83(
KF5.9-9FN 06/531-59 F2 F2
KF6-5.5YTN 06/721-301 *S
KF01-9-7YTN 06/721-301 F1*
KF3.7-7.5-2.5XTN 06/721-301 *S
KF5.8FF 06/721-301 F2 F2
XF
XF7-5.5FN 06/531-59 F/O 1 F/O 1
XF9FN 06/531-59 F2 F/O 1
XF01FN 06/531-59 F2 F1
XF11FN 06/721-59 F2
2.XF3.7-1.6FN 06/531-59 F/O 1 F/O 1
2.XF4.8FN 06/531-59 F2 F/O 1
G
G5.2LT 06/721-301 S S S
G4LT05/721-09 S S S
06/721-09 S S S
G51-21CS 06/721-301 F/O 1 F/O 1 F/O 1
G81CS06/531-59 F2 F2
06/721-301 F2
KG KG5.7-6FF 06/721-301 F/O 1 F/O 1 F/O 1
XG XG01-5.8FF 06/721-301 F1 F1 F1
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temp.)
F2
= Fan cooling 3.0 m/s necessary= Outside application range, not recommended
* = Run capacitor compulsory** = Not applicable below -20°F evaporating temperature in 110°F ambient temperature
above 127VThe application limits regarding evaporating temperatures and motor systems are specified in the individualcompressor datasheets.
July 2003 CK.40.A5.22 7
The compressors are equipped with a single-phase AC motor.The electrical equipment is classified as ’normal tight’ (IP20)Earth connections are located on the bracket around the current lead-in of the compressor.No attempt must be made to start the compressor without a complete starting device.The compressors can be supplied with the following motor systems:Compressors with the motor type Resistant Start Induction Run (RSIR) have a startingdevice for Low Starting Torque (LST). This starting device requires a pressure-equalizedsystem before each start. This starting device is normally used in well-designed refrigeratingsystems with capillary tube as throttling device. The design of the electrical equipmentdepends on the actual compressor design. As shown in the drawings the following designsof starting devices exist:a) PTC + cord relief + cover, the motor protector is built into the motor (winding protector)b) PTC + motor protector + coverc) relay housing incl. motor protector + terminal board with cord relief + coverd) relay housing incl. motor protector + cord relief + cover
Starting devices with PTC need a compressor standstill period of 5 minutes to cool down thePTC before each start.
c) FF-GK (alternative)
8074
-2
d) TF, TFS, FF, NF
8074
a) PL, TL, TLE, TLS b) TT, NTE
8087
-2
8073
3. Electrical equipment
3.1 LST (RSIR)
8 CK.40.A5.22 July 2003
Compressors with the motor type Resistant Start Capacitor Run (RSCR) have a startingdevice for Low Starting Torque (LST). This starting device requires a pressure-equalized sys-tem before each start. This starting device is normally used in well-designed refrigeratingsystems with capillary tube as throttling device. The design of the electrical equipment dependson the actual compressor design. As shown in the drawings the following designs of startingdevices exist:a) PTC + run capacitor + cord relief + cover,
the motor protector is built into the motor (winding protector)b) PTC + run capacitor + motor protector + cover
Starting devices with PTC need a compressor standstill period of 5 minutes to cool down thePTC before each start. This starting device is mandatory for some compressor designs and itis an option for others (specified in the invidual data sheets).
Compressors with the motor type Capacitor Start Induction Run (CSIR) have a starting devicefor High Starting Torque (HST). This starting device requires no pressure-equalization beforeeach start and is normally used in refrigerating systems with expansion valve as throttlingdevice or in capillary tube systems where pressure equalizing is not obtained during the standstillperiods. The starting capacitor is designed for short time cut-in. ’1.7% ED’ , which is stampedon the starting capacitor, means for instance max. 10 cut-ins per hour each with a duration of6 seconds. The design of the electrical equipment depends on the actual compressor design.As shown in the drawings the following designs ofstarting devices exist:a) Relay + starting capacitor + cord relief + cover,
the motor protector is built into the motor (windingprotector)
b) Relay housing incl. motor protector + startingcapacitor with bracket + cord relief (2x) + cover
c) Relay housing incl. motor protector + startingcapacitor + cord relief (2x) + cover
d) Relay + starting capacitor + cord relief + cover(SC)
e) Relay + starting capacitor (with bracket) + cover/protector/protector holder (parts of compressor),used for compressors with the denomination SCwhich have an external protector.
This starting device is mandatory for some compressor designs and it is an option for others(specified in the invidual data sheets).
a) TL, TLS
8076
a) NLE b) NTE, NTY, TT
8087
8075
3.2 LST (RSCR)
3.3 HST (CSIR)
July 2003 CK.40.A5.22 9
The electrical components are equipped with connectors depending on the ordered code number,Starting relays: 1/4 in. (6.3 mm) spade connectors onlyPTCs: 1/4 or 3/16 in. (6.3 or 4.8 mm) spade connectors
The power supply must be connected as shown in the wiring diagrams for the chosen electricalequipment given in the actual datasheets.
Most compressors have been approved in respect of safety bytesting authorities UL and CSA. Actual standards to which thecompressors have been approved are specified in the individualdatasheets. Approval markings appear on a separate approvalmark label.
d) SC
8088
e) SC (external protector)
8467
b) FF-X c) NF-X, TFS
8077
-2
8077
R
NLE5.5F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8315
-2
3.4 Connections
3.5 Approvals
10 CK.40.A5.22 July 2003
The compressors are dried to a maximum moisture content of 60 to 75 mg depending on thecompressor size. The maximum impurity content is 40 to 50 mg depending on the compressorsize.
The refrigerant charge must never be too large to be contained on the condenser side of therefrigeration system. Only the refrigerant amount which is necessary for the system to functionmust be charged.The refrigerant amount may be critical as regards oil foaming and liquid hammer after longstandstill periods. Because of this, limitations of refrigerant charges have been introduced.The maximum refrigerant charge is specified in the individual datasheets.If these limitations cannot be complied with, the risk may be reduced if a crankcase heater isproperly used or if a pump down system is established.
The compressors are supplied charged with dried and degassed oil, which is normally sufficientfor the lifetime of the compressor. The refrigeration systems and the system componentsmust be dimensioned in such a way that the oil can be lead back continuously to the compressorhousing without accumulating in the system, e.g. without oil pockets and with sufficient gasvelocity. The compressors use polyolester oils and are approved only for these oils and R134a.The oil charge is specified in the individual datasheets.
Soldering problems caused by oil in the connectors can be avoided by placing the compressoron its baseplate some time before soldering it into the system. The compressor must never beplaced upside down when mounting the rubber grommets in the baseplate. Instead place thecompressor on its side with the connectors upwards.
The mounting accessories for the compressors are available in two versions, with bolt joint orsnap-on joint. The code numbers for the mounting accessories are specified in the individualcompressor datasheets.These rubber grommets are designed for the 5/8 in. (16 mm) holes of the baseplate:Bolt joint for one compressor in a bag 118 - 1917 (with screw M6 x 25 mm)
118 - 1946 (with screws 1/4 inch)Bolt joint in quantities 118 - 1918 (with screws M6 x 25 mm)Snap-on in quantities 118 - 1919Snap-on for one compressor in a bag 118 - 1947
These rubber grommets are designed for the 3/4 in. (19 mm) holes of the baseplate:Bolt joint in quantities 118 - 1949 (with screws 1/4 inch)
Bolt joint (metric sytem) Snap-on joint
3327-2
9
Compressor base Grommet sleeveWasher Nut M6
Cabinet base Screw M6 x 25 Rubber grommet
9
Washer
Compressor base
Clip
Steel pin
7382-2
Cabinet base Rubber grommet
7. Mounting
7.1 Mountingaccessories
6. Oil charge
5. Max. refrigerantcharge
4. Moisture andImpurities
July 2003 CK.40.A5.22 11
The compressors are delivered without mounted starting devices on pallets with the dimensions1144 x 800 mm. Quantities per pallets are specified in the individual datasheets. Electricalcomponents are packed in separate boxes.The most important performance controls carried out during manufacturing are,
• A high potential insulation test with 1650V for 1 second• Pumping capacity• Tightness of discharge side and discharge valve• Tightness of compressor housing• Check of the right oil charge• Noise test
The compressors are supplied with sealed connectors and the sealing should not be removedbefore the system assembly takes place(max 15 minutes with open connectors).
Normally, the capillary tube shall be adjusted at low evaporating temperatures. Compared toan optimized R12 system with the same evaporator capacity, the R134a system must havean increased resistance defined as approx. 10% less N
2 flow at 10 bar inlet pressure.
The same size of capillary tube as used for R12 can be used at high evaporating tempera-tures.
A drier with 3Å desiccant of Molecular Sieves must always be used.
Rules for dryness and cleanliness of system components (e.g. DIN 8964) are transferred toR134a systems.
The system components must not contain mineral oil or greasy substances.
The compressors must be soldered into the system no later than 15 minutes after the con-nector seals have been removed.
The same evacuation procedure as for R12 systems must be used.
Max. 1% non-condensable gases.
The system must not contain any chlorine.
The charging equipment must only be used for R134a.
If the same vacuum pump is to be used for R12 and R134a systems, a special Ester oil mustbe used in agreement with the pump supplier.
No high potential test nor start tests must be carried out while the compressor is under vacuum.No attempt must be made to start the compressor without a complete starting device.Allow the compressor to assume a temperature above 50°F (10°C) before starting the firsttime in order to avoid starting problems.Anti-freeze agents must not be used in the compressors as such agents are damaging toseveral of the materials used. In particular, the ethyl or methyl alcohol contents of such anti-freeze agents have a destructive effect on the synthetic motor insulation.
10. Warnings
9. Conversion fromR12 to R134a
8. Condition at delivery
12 CK.40.A5.22 July 2003
April 2003 CD.41.J5.22 1
Data Sheet (Replaces CD.41.J4.22)
PL30FStandard CompressorR134a100-115V 50/60Hz
General
Application LBP/HBP
Evaporating temperature range °F (°C) -13 to 59 (-25 to 15)
Voltage range V/Hz 90 - 127 /50,60
Motor type RSIR/CSIR
Max. ambient temperature V/°F (°C) 115 / 110 (43)
at Voltage V/°F (°C) 100 / 100 (38)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
100°F (38°C) S
Application
Design
Displacement cu.in. (cm3) 0.09 (1.41)
Oil quantity fl.oz. (cm3) 5.1 (150)
Maximum refrigerant charge oz. (g) 10.5 (300)
Free gas vol. in compressor housing fl.oz. (cm3) 28.9 (850)
Weight without electrical equipment lbs. (kg) 9.5 (4.3)
Motor
Motor size watt 50
LRA (rated after 4 sec.UL984) LST/HST A 9.5/6.1
Cut-in current LST/HST A 9.5/6.1
Resistance, main and start winding (77°F) Ω 7.6/13.6
Approvals UL984/CSA-C22.2
101G
9100
PL30F
R134a
8308
-3
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R
PL30F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8308
-4
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
Compressor (CU-plated steel connectors) PL30F
Code number 101G9100
B A
CE
D
8240
B2
B1
8.03"(204)
6.70"(170)
8.11"(206)
5.00"(127)
1.97
"(50
)
2.38
"(6
0.5)
5.12
"(13
0)
2.32
"(59
)
1.81
"(4
6)
ø0.35"(9)ø0.63"(16)
3.94
"(10
0)
2.76
" (70
)
1.38
"(3
5)
Dimensions
Height in. (mm) A 5.28 (134)
B 5.20 (132)
B1 4.88 (124)
B2 2.87 (73)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 150
July 2003 CK.40.A5.22 13
2 CD.41.J5.22 April 2003
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at HBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at HBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
F03LP 1.98 301 651 122 203 993 715 485 756 408
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
5195
F03LP 0.12 3.42 8.63 3.25 2.17 2.49 221 731 451 981
Test conditions ASHRAE (LBP) ASHRAE (HBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Static cooling, 115V 60Hz, PTC consumption incl.
8224
N
N LC
b
d
a1
8224-2
a1
Winding protector
Start windingMain winding
8225
10 11
131214
b
d
a2
c
c
Main winding Start windingWinding protector
HST
LST
seciveD .giF F03LP
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni1a 3000N301
3200N301
yalergnitratS 2a 0006U711
08roticapacgnitratS µF c 5105U711
revoC b 2940N301
feilerdroC d 0101N301
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
F03LP 2.97 6.19 931 791 862 453 854 715 185 117
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
5195
F03LP 24.0 84.0 76.0 68.0 70.1 03.1 55.1 96.1 38.1 21.2
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
F03LP 7.94 8.05 2.55 5.06 3.66 4.27 5.87 4.18 2.48 9.88
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
F03LP 70.1 70.1 90.1 11.1 31.1 61.1 91.1 02.1 22.1 52.1
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
F03LP 97.1 30.2 28.2 66.3 55.4 15.5 85.6 71.7 97.7 40.9
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
F03LP 95.1 08.1 15.2 52.3 40.4 98.4 38.5 53.6 09.6 99.7
14 CK.40.A5.22 July 2003
February 2003 CD.41.A7.22 1
Data Sheet (Replaces CD.41.A6.22)
PL50FStandard Compressor - LST Starting CharacteristicsR134a115V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) -13 to 32 (-25 to 0)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.12 (2.00)
Oil quantity fl.oz. (cm3) 5.1 (150)
Maximum refrigerant charge oz. (g) 10.5 (300)
Free gas vol. in compressor housing fl.oz. (cm3) 28.9 (850)
Weight without electrical equipment lbs. (kg) 9.5 (4.3)
Motor
Motor size watt 50
LRA (rated after 4 sec.UL984) LST A 4.9
Cut-in current LST A 14.0
Resistance, main and start winding (77°F) Ω 8.8/5.5
Approvals UL984/CSA-C22.2
101G
9200
PL50F
R134a
8308DANFOSS COMPRESSORSBarcode on
white background
Green background
Blue stripe
Application
R
PL50F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8308
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
Compressor (CU-plated steel connectors) PL50F
Codenumber 101G9200
B A
CE
D
8240
B2
B1
8.03"(204)
6.70"(170)
8.11"(206)
5.00"(127)
1.97
"(50
)
2.38
"(6
0.5)
5.12
"(13
0)
2.32
"(59
)
1.81
"(4
6)
ø0.35"(9)ø0.63"(16)
3.94
"(10
0)
2.76
" (70
)
1.38
"(3
5)
Dimensions
Height in. (mm) A 5.28 (134)
B 5.20 (132)
B1 4.88 (124)
B2 2.87 (73)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 150
July 2003 CK.40.A5.22 15
2 CD.41.A7.22 February 2003
8224
N
N LC
b
d
a1
8224-2
a1
Winding protector
Start windingMain winding
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Static cooling, 115V 60Hz, PTC consumption incl.
seciveD .giF F05LP
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni1a 3000N301
3200N301
revoC b 2940N301
feilerdroC d 0101N301
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 551 571 942 533 734 755 485
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 831 651 122 792 883 494 815
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 3.26 0.56 2.37 9.08 5.88 2.69 8.79
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 21.1 31.1 81.1 22.1 72.1 33.1 43.1
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 94.2 07.2 93.3 41.4 49.4 97.5 79.5
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 12.2 04.2 20.3 76.3 83.4 41.5 92.5
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
023
F05LP 8.63 5.14 9.85 3.97 301 231 831
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
023
F05LP 95.0 46.0 08.0 89.0 71.1 73.1 14.1
16 CK.40.A5.22 July 2003
February 2003 CD.41.I4.22 1
Data Sheet (Replaces CD.41.I3.22)
PL50FStandard CompressorR134a115V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) -13 to 32 (-25 to 0)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR/CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.12 (2.00)
Oil quantity fl.oz. (cm3) 5.1 (150)
Maximum refrigerant charge oz. (g) 10.5 (300)
Free gas vol. in compressor housing fl.oz. (cm3) 28.9 (850)
Weight without electrical equipment lbs. (kg) 9.5 (4.3)
Motor
Motor size watt 50
LRA (rated after 4 sec.UL984) LST/HST A 9.5/6.1
Cut-in current LST/HST A 9.5/6.1
Resistance, main and start winding (77°F) Ω 7.6/13.6
Approvals UL984/CSA-C22.2
101G
9202
PL50F
R134a
8308
-5
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R
PL50F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8308
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
Compressor (CU-plated steel connectors) PL50F
Codenumber 101G9202
B A
CE
D
8240
B2
B1
8.03"(204)
6.70"(170)
8.11"(206)
5.00"(127)
1.97
"(50
)
2.38
"(6
0.5)
5.12
"(13
0)
2.32
"(59
)
1.81
"(4
6)
ø0.35"(9)ø0.63"(16)
3.94
"(10
0)
2.76
" (70
)
1.38
"(3
5)
Dimensions
Height in. (mm) A 5.28 (134)
B 5.20 (132)
B1 4.88 (124)
B2 2.87 (73)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 150
July 2003 CK.40.A5.22 17
2 CD.41.I4.22 February 2003
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 551 571 942 533 734 755 485
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 831 651 122 792 883 494 815
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 3.26 0.56 2.37 9.08 5.88 2.69 8.79
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 21.1 31.1 81.1 22.1 72.1 33.1 43.1
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 94.2 07.2 93.3 41.4 49.4 97.5 79.5
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
230
F05LP 12.2 04.2 20.3 76.3 83.4 41.5 92.5
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
023
F05LP 8.63 5.14 9.85 3.97 301 231 831
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
023
F05LP 95.0 46.0 08.0 89.0 71.1 73.1 14.1
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Static cooling, 115V 60Hz, PTC consumption incl.
8224
N
N LC
b
d
a1
8224-2
a1
Winding protector
Start windingMain winding
8225
10 11
131214
b
d
a2
c
c
Main winding Start windingWinding protector
HST
LST
seciveD .giF F05LP
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni1a 3000N301
3200N301
yalergnitratS 2a 0006U711
08roticapacgnitratS µF c 5105U711
revoC b 2940N301
feilerdroC d 0101N301
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
18 CK.40.A5.22 July 2003
June 2003 CD.42.B6.22 1
Height in. (mm) A 6.42 (163)
B 6.26 (159)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 125
Compressor TL2.5F
Connector-material Sealing Code number
Copper-plated steel Aluminium caps 102G3206
Copper-plated steel Rubber plugs
Copper Rubber plugs
BA
30°
31.5°28°
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
8.74"(222)
6.93"(176)
51°
20°
45°
82612.
80"(
71)
1.14
"(2
9)3.78"(96)
4.61"(117)
4.02"(102)
6.18
"(15
7)
2.38
"(60
.5)
2.60
"(66
)
ø0.63"(16)
ø0.14"(3.6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
6.50"(165)
E
Cor
DD
orC
Data Sheet (Replaces CD.42.B5.22)
TL2.5FStandard CompressorR134a115V 60Hz
General
Design
Displacement cu.in. (cm3) 0.16 (2.61)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 54.2 (1600)
Weight without electrical equipment lbs. (kg) 14.7 (6.7)
Motor
Motor size watt 75
LRA (rated after 4 sec.UL984) LST A 5.3
Cut-in current LST A 14.5
Resistance, main and start winding (77°F) Ω 7.3/4.8
Approvals UL984/CSA-C22.2
102G
3206
TL2.5F
8310
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
Application LBP/MBP
Evaporating temperature range °F (°C) -13 to 23 (-25 to -5)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application R
TL2.5F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8310
-2
Dimensions
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 19
2 CD.42.B6.22 June 2003
8217-2
N
N LC
b
d
a1
a1
Winding protector
Start windingMain winding
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.2LT 181 202 782 693 425 865
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Static cooling, 115V 60Hz, PTC consumption incl.
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.2LT 261 081 552 453 664 605
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
5-32
F5.2LT 34 84 86 39 421 431
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
5-32
F5.2LT 07.0 47.0 88.0 40.1 91.1 32.1
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.2LT 16 56 77 09 401 901
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.2LT 19.0 49.0 00.1 80.1 22.1 92.1
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.2LT 69.2 11.3 37.3 24.4 50.5 22.5
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.2LT 36.2 77.2 23.3 39.3 94.4 56.4
seciveD .giF F5.2LT
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni1a 3000N301
3200N301
revoC b 1102N301
feilerdroC d 0101N301
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
20 CK.40.A5.22 July 2003
July 2003 CG.42.O2.22 1
Compressor TL3F
Connector-material Sealing Code number
Copper-plated steel Aluminium caps 102G3300
Copper-plated steel Rubber plugs 102G3307
Copper Rubber plugs
Data Sheet (Replaces CG.42.O1.22)
TL3FStandard CompressorR134a115V 60Hz
General
Design
Displacement cu.in. (cm3) 0.19 (3.13)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 54.2 (1600)
Weight without electrical equipment lbs. (kg) 14.7 (6.7)
Motor
Motor size watt 90
LRA (rated after 4 sec.UL984) LST A 6.0
Cut-in current LST A 15.0
Resistance, main and start winding (77°F) Ω 6.3/4.8
Approvals UL984/CSA-C22.2
102G
3300
TL3F
8310
-3
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
Application LBP/MBP
Evaporating temperature range °F (°C) -13 to 23 (-25 to -5)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application R
TL3F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8310
-4
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
Height in. (mm) A 6.42 (163)
B 6.26 (159)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 125
BA
30°
31.5°28°
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
8.74"(222)
6.93"(176)
51°
20°
45°
82612.
80"(
71)
1.14
"(2
9)3.78"(96)
4.61"(117)
4.02"(102)
6.18
"(15
7)
2.38
"(60
.5)
2.60
"(66
)
ø0.63"(16)
ø0.14"(3.6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
6.50"(165)
E
Cor
DD
orC
Dimensions
July 2003 CK.40.A5.22 21
2 CG.42.O2.22 July 2003
8217-2
N
N LC
b
d
a1
a1
Winding protector
Start windingMain winding
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F3LT 822 352 153 874 636 296
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Static cooling, 115V 60Hz, PTC consumption incl.
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F3LT 302 522 213 524 665 616
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
5-32
F3LT 45 06 38 311 051 361
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
5-32
F3LT 57.0 87.0 09.0 40.1 02.1 62.1
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F3LT 27 77 29 801 521 031
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F3LT 90.1 21.1 12.1 23.1 74.1 25.1
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F3LT 51.3 92.3 08.3 24.4 11.5 43.5
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F3LT 08.2 39.2 83.3 39.3 55.4 57.4
seciveD .giF F3LT
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni1a 3000N301
3200N301
revoC b 1102N301
feilerdroC d 0101N301
seirosseccagnitnuoM )7033G201(rosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
seirosseccagnitnuoM )0033G201(rosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
22 CK.40.A5.22 July 2003
July 2003 CG.42.P2.22 1
Compressor TL4F
Connector-material Sealing Code number
Copper-plated steel Aluminium caps 102G3400
Copper-plated steel Rubber plugs 102G3402
Copper Rubber plugs
Data Sheet (Replaces CG.42.P1.22)
TL4FStandard CompressorR134a115V 60Hz
General
Design
Displacement cu.in. (cm3) 0.23 (3.86)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 54.2 (1600)
Weight without electrical equipment lbs. (kg) 14.7 (6.7)
Motor
Motor size watt 105
LRA (rated after 4 sec.UL984) LST A 7.0
Cut-in current LST A 16.0
Resistance, main and start winding (77°F) Ω 5.3/4.9
Approvals UL984/CSA-C22.2
102G
3400
TL4F
8310
-5
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 20 (-35 to -6.7)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application R
TL4F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8310
-6
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
BA
30°
31.5°28°
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
8.74"(222)
6.93"(176)
51°
20°
45°
82612.
80"(
71)
1.14
"(2
9)3.78"(96)
4.61"(117)
4.02"(102)
6.18
"(15
7)
2.38
"(60
.5)
2.60
"(66
)
ø0.63"(16)
ø0.14"(3.6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
4.00
"(10
1.6)
2.76
" (70
)
5.35
"(13
6)
6.50"(165)
E
Cor
DD
orC
Height in. (mm) A 6.42 (163)
B 6.26 (159)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 125
Dimensions
July 2003 CK.40.A5.22 23
2 CG.42.P2.22 July 2003
8217-2
N
N LC
b
d
a1
a1
Winding protector
Start windingMain winding
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
F4LT 181 822 182 013 034 495 208
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Static cooling, 115V 60Hz, PTC consumption incl.
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
F4LT 161 302 052 672 383 925 417
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
F4LT 34 45 66 37 201 141 091
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
F4LT 46 77 78 19 701 421 241
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
F4LT 63.1 34.1 94.1 25.1 16.1 27.1 48.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
F4LT 18.2 79.2 52.3 14.3 30.4 97.4 46.5
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
F4LT 05.2 46.2 98.2 30.3 95.3 62.4 20.5
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
F4LT 66.0 07.0 77.0 08.0 59.0 31.1 33.1
seciveD .giF F4LT
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni1a 3000N301
3200N301
revoC b 1102N301
feilerdroC d 0101N301
seirosseccagnitnuoM )2043G201(rosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
seirosseccagnitnuoM )0043G201(rosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
24 CK.40.A5.22 July 2003
June 2003 CD.42.D5.22 1
Compressor (CU-plated steel connectors) TLS4.5F
Codenumber (small baseplate) 102G3420
Codenumber (large baseplate) 102G3421
Data Sheet (Replaces CD.42.D4.22)
TLS4.5FStandard CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 23 (-35 to -5)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR/CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.29 (4.63)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 60.7 (1790)
Weight without electrical equipment lbs. (kg) 14.7 (6.7)
Motor
Motor size watt 170
LRA (rated after 4 sec.UL984) LST/HST A 12.2/14.2
Cut-in current LST/HST A 22.6/14.2
Resistance, main and start winding (77°F) Ω 3.2/3.4
Approvals UL984/CSA-C22.2
102G
3420
TLS4.5F
SUCTIONCONNECTOR
8311
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
Application
R134a
R
TLS4.5F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8311
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
BA
30° 31.5°
28°
8.74"(222)
6.93"(176)
51°
20°
45°
8403
2.80
"(71
)
1.14
"(2
9)
3.78"(96)
4.61"(117)
4.02"(102)
6.18
"(15
7)
2.38
"(60
.5)
2.60
"(6
6)
ø0.63"(16)
ø0.14"(3.6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
4.00
"(10
1.6)
2.76
"(70
)
5.35
" (13
6)
6.50"(165)
ø0.35"(9)
C D
E
2.76
"(70
)
1.38
"(3
5)
3.94
"(10
0)
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)Dimensions
Height in. (mm) A 6.42 (163)
B 6.26 (159)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 125
July 2003 CK.40.A5.22 25
2 CD.42.D5.22 June 2003
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.4SLT 542 043 134 774 456 578 5311 5221
seciveD .giF F5.4SLT
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni1a 3000N301
3200N301
yalergnitratS 2a 3006U711
042roticapacgnitratS µF c 3205U711
revoC b 1102N301
feilerdroC d 0101N301
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
5-32
F5.4SLT 85 08 201 311 551 802 962 092
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
5-32
F5.4SLT 36.0 37.0 38.0 78.0 30.1 91.1 53.1 04.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.4SLT 29 011 321 921 051 471 991 702
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.4SLT 78.1 39.1 99.1 20.2 31.2 72.2 14.2 64.2
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.4SLT 66.2 01.3 05.3 96.3 43.4 30.5 17.5 19.5
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, 115V 60Hz, PTC consumption incl.
8217-2
N
N LC
b
d
a1
a1
Winding protector
Start windingMain winding
8219
10 11
131214
b
d
a2
c
c
Main winding Start windingWinding protector
HST
LST
26 CK.40.A5.22 July 2003
July 2003 CD.42.C5.22 1
E
Cor
DD
orC
51°
20°
45°
8370
BA
30°
31.5°28°
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
2.80
"(71
)
1.14
"(2
9)
3.78"(96)
4.61"(117)
4.02"(102)
8.90"(226)
6.93"(176)
6.18
"(15
7)
2.34
"(59
.5)
2.60
"(6
6)
ø0.63"(16)6.50"(165)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
ø0.14"(3.6)
Data Sheet (Replaces CD.42.C4.22)
TF3FStandard CompressorR134a115-127V 60Hz
General
Design
Displacement cu.in. (cm3) 0.19 (3.13)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 54.2 (1600)
Weight without electrical equipment lbs. (kg) 14.7 (6.7)
Motor
Motor size watt 100
LRA (rated after 4 sec.UL984) LST A 15.7
Cut-in current LST A 15.7
Resistance, main and start winding (77°F) Ω 5.1/10.0
Approvals -
Dimensions 102G3303 102G3301
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 95 - 135 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Compressor TF3F
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 102G3303
Copper Rubber plugs 102G3301
Height in. (mm) A 6.42 (163)
B 6.26 (159)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20) 0.189-0.193 (4.9+0.10/-0)
Compressors on a pallet pcs. 125
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
102G
3303
TF3F
8327
-3
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
July 2003 CK.40.A5.22 27
2 CD.42.C5.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, 115V 60Hz
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F3FT 0.73 7.75 0.17 5.67 6.39 901 611
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F3FT 01.1 02.1 82.1 13.1 34.1 45.1 95.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F3FT 98.1 65.2 69.2 31.3 27.3 73.4 56.4
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F.3FT 44.0 16.0 07.0 47.0 88.0 30.1 01.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F3FT 9.96 841 012 932 843 874 835
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F3FT 1.61 7.43 5.94 4.65 2.28 311 7218230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
seciveD .giF F3FT
).lcnirotcetorp(yalergnitratS2a
0014U711
.rtsnIsaxeT"4/3rotcetorP 6-LG16PRM
revoC b 1201U711
feilerdroC d 9430U711
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
28 CK.40.A5.22 July 2003
July 2003 CG.42.Q2.22 1
E
Cor
DD
orC
51°
20°
45°
8370
BA
30°
31.5°28°
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
2.80
"(71
)
1.14
"(2
9)
3.78"(96)
4.61"(117)
4.02"(102)
8.90"(226)
6.93"(176)
6.18
"(15
7)
2.34
"(59
.5)
2.60
"(6
6)
ø0.63"(16)6.50"(165)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
ø0.14"(3.6)
Data Sheet (Replaces CG.42.Q1.22)
TF3.5FStandard CompressorR134a115-127V 60Hz
General
Design
Displacement cu.in. (cm3) 0.22 (3.59)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 60.6 (1790)
Weight without electrical equipment lbs. (kg) 16.5 (7.5)
Motor
Motor size watt 135
LRA (rated after 4 sec.UL984) LST A 18.9
Cut-in current LST A 18.9
Resistance, main and start winding (77°F) Ω 3.8/7.8
Approvals UL984/CSA-C22.2
Dimensions 102G3304 102G3302
102G
3304
TF3.5F
8327
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 95 - 135 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Height in. (mm) A 6.81 (173)
B 6.65 (169)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20) 0.189-0.193 (4.9+0.10/-0)
Compressors on a pallet pcs. 125
R
TF3.5F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8327
-2
Compressor TF3.5F
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 102G3304
Copper Rubber plugs 102G3302
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 29
2 CG.42.Q2.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, 115V 60Hz
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5.3FT 66 97 98 39 801 321 921
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5.3FT 55.1 06.1 46.1 66.1 37.1 28.1 68.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5.3FT 30.2 95.2 40.3 52.3 69.3 37.4 30.5
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F5.3FT 84.0 26.0 27.0 77.0 49.0 21.1 02.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5.3FT 331 502 072 303 624 185 156
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F5.3FT 23 94 46 27 101 831 5518230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
seciveD .giF F5.3FT
).lcnirotcetorp(yalergnitratS
2a
2214U711
.rtsnIsaxeT"4/3rotcetorP 6-KJ75PRM
acirtcelE"4/3rotcetorP 60/7270T
revoC b 1201U711
feilerdroC d 9430U711
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
30 CK.40.A5.22 July 2003
July 2003 CD.42.A5.22 1
51°
20°
45°
8246
BA
30°
31.5°28°
C D
E
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
2.80
"(71
)
1.14
"(2
9)
3.78"(96)
4.61"(117)
4.02"(102)
8.90"(226)
6.93"(176)
6.18
"(15
7)
2.34
"(59
.5)
2.60
"(6
6)
ø0.63"(16)6.50"(165)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
ø0.14"(3.6)
Data Sheet (Replaces CD.42.A4.22)
TFS4FStandard CompressorR134a115-127V 60Hz
General
Design
Displacement cu.in. (cm3) 0.23 (3.86)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 60.6 (1790)
Weight without electrical equipment lbs. (kg) 16.5 (7.5)
Motor
Motor size watt 135
LRA (rated after 4 sec.UL984) LST A 18.9
Cut-in current LST A 18.9
Resistance, main and start winding (77°F) Ω 3.8/7.8
Approvals UL984/CSA-C22.2
Dimensions 102G3431 102G3430
102G
3431
TFS4F
8326
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
Application
SUCTIONCONNECTOR
R134a
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 95 - 135 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Height in. (mm) A 6.81 (173)
B 6.65 (169)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20) 0.189-0.193 (4.9+0.10/-0)
Compressors on a pallet pcs. 125
R
TFS4F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8326
-2
Compressor TFS4F
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 102G3431
Copper Rubber plugs 102G3430
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 31
2 CD.42.A5.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, 115V 60Hz
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F4SFT 06 97 29 79 411 231 931
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F4SFT 64.1 35.1 95.1 26.1 17.1 28.1 78.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F4SFT 85.2 00.3 44.3 66.3 34.4 82.5 26.5
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F4SFT 16.0 17.0 28.0 78.0 50.1 62.1 43.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F4SFT 551 732 513 553 605 796 287
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F4SFT 73 65 57 58 021 661 6818230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
seciveD .giF F4SFT
).lcnirotcetorp(yalergnitratS
2a
2214U711
.rtsnIsaxeT"4/3rotcetorP 6-KJ75PRM
acirtcelE"4/3rotcetorP 60/7270T
revoC b 1201U711
feilerdroC d 9430U711
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
32 CK.40.A5.22 July 2003
July 2003 CD.42.Q6.22 1
Compressor TT2.5F
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 102G3248
Copper Rubber plugs
Data Sheet (Replaces CD.42.Q5.22)
TT2.5FStandard CompressorR134a115V 60Hz
General
Design
Displacement cu.in. (cm3) 0.16 (2.61)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 54.2 (1600)
Weight without electrical equipment lbs. (kg) 14.7 (6.7)
Motor
Motor size watt 65
LRA (rated after 4 sec.UL984) LST A 5.1
Cut-in current LST A 14.0
Resistance, main and start winding (77°F) Ω 8.1/4.9
Approvals UL984/CSA-C22.2
102G
3248
TT2.5F
8325
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
Application MBP
Evaporating temperature range °F (°C) -13 to 23 (-25 to -5)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application R
TT2.5F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8325
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
Dimensions
Height in. (mm) A 6.22 (158)
B 5.98 (152)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.189-0.193 (4.9+0.10/-0)
Compressors on a pallet pcs. 125
E
Cor
DD
orC
51°
20°
45°
8530
BA
30° 31.5°
4.06
"(10
3)
4.06
"(10
3)
4.72
"(12
0)
2.80
"(71
)
1.14
"(2
9)
3.78"(96)4.02"(102)
8.90"(226)
6.93"(176)
6.18
"(15
7)
2.34
"(59
.5)
2.60
"(6
6)
ø0.63"(16)6.50"(165)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
ø0.14"(3.6)
July 2003 CK.40.A5.22 33
2 CD.42.Q6.22 July 2003
Accessories
Test conditions ASHRAE (MBP) EN 12900/CECOMAFCondensing temperature 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 115°F (46°C) 55°C (131°F)Static cooling, 115V 60Hz, PTC consumption incl.
seciveD .giF F5.2TT
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
5016U711
021A-021A-605J
revoC b 6201U711
rotcetorP )stnemurtsnIsaxeT( f1033U711
35-YYBFN672MT4-IT
seirosseccagnitnuoMrosserpmocenonitniojtloBrosserpmocenonitniojtloBrosserpmocenonino-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/h
8234
12
34
b
f
a1
Main winding
Motor protector
Start winding
a1
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.2TT 661 781 862 373 694 935
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
5-32
F5.2TT 44 05 17 89 231 341
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.2TT 66 96 18 39 701 211
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
5-32
F5.2TT 86.0 27.0 88.0 50.1 32.1 82.1
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.2TT 69.0 99.0 40.1 11.1 22.1 82.1
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
325-
F5.2TT 45.2 96.2 13.3 99.3 46.4 38.4
34 CK.40.A5.22 July 2003
July 2003 CG.43.T3.22 1
Compressor NF6FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps 105G5636
Copper-plated steel Rubber plugs 105G5628
Copper Rubber plugs
Data Sheet (Replaces CG.43.T2.22)
NF6FKStandard CompressorR134a115-127V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 45 (-35 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type RSIR/CSIR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 100°F (38°C) S
110°F (43°C) F1
Application
Design
Displacement cu.in. (cm3) 0.37 (6.13)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 23.0 (10.5)
MotorMotor size watt 255
LRA (rated after 4 sec.UL984) LST A 29.4
Cut-in current LST A 29.4
Resistance, main and start winding (77°F) Ω 2.0/9.1
Approvals UL984/CSA-C22.2
105G
5628
NF6FK
8398
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
9.92"(252)
A B
C
ED
6.54
(166
)"
8367
3.01
"(78
)
2.13
"(5
4)
4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
" (75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
*In capillary tube systems where non-equalized pressuresmay occur at compressor start, or in areas with short powersupply drop-outs, a starting capacitor can be used for en-suring a successful start (CSIR).
Dimensions 105G5628 105G5636
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09) 0.242-0.249 (6.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.242-0.249 (6.2±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09) 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 80
R
NF6FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8398
-2
July 2003 CK.40.A5.22 35
2 CG.43.T3.22 July 2003
8230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF6FN 682 264 206 866 219 6021 0651 2891 4842 8672
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
KF6FN 76 901 341 851 612 682 963 864 685 356
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
(pos.1)
(pos.2)
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF6FN 452 114 535 395 118 1701 4831 8571 2022 2542
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
KF6FN 86.0 97.0 88.0 29.0 60.1 32.1 24.1 46.1 88.1 10.2
seciveD .giF KF6FN
).lcnirotcetorp(yalergnitratS 2a)1.sop(
1314U711
stnemurtsnIsaxeT"4/3rotcetorP 6-ZEA03TRM
).lcnirotcetorp(yalergnitratS 2ac
2.sop( )
*2314U711
023roticapacgnitratS µF *2205U711
stnemurtsnIsaxeT"4/3rotcetorP 6-ZEA03TRM
revoC b 1201U711
feilerdroC d 7130U711
roticapacfeilerdroC cd 9430U711
seirosseccagnitnuoM )8265G501(rosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
seirosseccagnitnuoM )6365G501(rosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
Test conditions1. Condensing temperature2. Ambient & suction gas temp.3. Liquid temperatureFan cooling F
1, 115V 60Hz
ASHRAE1. LBP 130°F (54,4°C)2. 90°F (32°C)3. 90°F (32°C)1. MBP 130°F (54,4 °C)2. 95°F (35°C)3. 115°F (46°C)
EN 12900/CECOMAF1. 55°C (131°F)2. 32°C (90°F)3. 55°C (131°F)
*In capillary tube systems where non-equalized pressures may occur atcompressor start, or in areas with short power supply drop-outs, a startingcapacitor can be used for ensuring a successful start (CSIR).
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF6FN 55.2 89.2 03.3 44.3 89.3 16.4 43.5 61.6 90.7 95.7
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF6FN 78.2 53.3 17.3 78.3 84.4 91.5 10.6 59.6 00.8 75.8
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF6FN 001 831 261 271 402 232 952 582 013 323
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF6FN 33.2 94.2 06.2 56.2 28.2 00.3 91.3 93.3 95.3 96.3
36 CK.40.A5.22 July 2003
July 2003 CG.43.U3.22 1
Compressor NF7FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps 105G5736
Copper-plated steel Rubber plugs 105G5728
Copper Rubber plugs
Data Sheet (Replaces CG.43.U2.22)
NF7FKStandard CompressorR134a115-127V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 45 (-35 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type RSIR/CSIR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 100°F (38°C) S
110°F (43°C) F1
Application
Design
Displacement cu.in. (cm3) 0.44 (7.27)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 23.0 (10.5)
MotorMotor size watt 255
LRA (rated after 4 sec.UL984) LST A 29.4
Cut-in current LST A 29.4
Resistance, main and start winding (77°F) Ω 2.0/9.1
Approvals UL984/CSA-C22.2
105G
5728
NF7FK
8398
-3
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
9.92"(252)
A B
C
ED
6.54
(166
)"
8367
3.01
"(78
)
2.13
"(5
4)
4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
" (75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
*In capillary tube systems where non-equalized pressuresmay occur at compressor start, or in areas with short powersupply drop-outs, a starting capacitor can be used for en-suring a successful start (CSIR).
Dimensions 105G5728 105G5736
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09) 0.242-0.249 (6.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.242-0.249 (6.2±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09) 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 80
R
NF7FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8398
-4
July 2003 CK.40.A5.22 37
2 CG.43.U3.22 July 2003
8230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF7FN 104 006 857 338 2111 1541 1681 5532 6492 2823
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
KF7FN 59 241 081 891 462 443 144 755 696 577
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
(pos.1)
(pos.2)
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF7FN 753 335 476 047 889 8821 1561 9802 1162 7092
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
KF7FN 37.0 48.0 39.0 79.0 11.1 62.1 54.1 56.1 88.1 00.2
seciveD .giF KF7FN
).lcnirotcetorp(yalergnitratS 2a)1.sop(
1314U711
stnemurtsnIsaxeT"4/3rotcetorP 6-ZEA03TRM
).lcnirotcetorp(yalergnitratS 2ac
2.sop( )
*2314U711
023roticapacgnitratS µF *2205U711
stnemurtsnIsaxeT"4/3rotcetorP 6-ZEA03TRM
revoC b 1201U711
feilerdroC d 7130U711
roticapacfeilerdroC cd 9430U711
seirosseccagnitnuoM )8275G501(rosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
seirosseccagnitnuoM )6375G501(rosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
Test conditions1. Condensing temperature2. Ambient & suction gas temp.3. Liquid temperatureFan cooling F
1, 115V 60Hz
ASHRAE1. LBP 130°F (54,4°C)2. 90°F (32°C)3. 90°F (32°C)1. MBP 130°F (54,4 °C)2. 95°F (35°C)3. 115°F (46°C)
EN 12900/CECOMAF1. 55°C (131°F)2. 32°C (90°F)3. 55°C (131°F)
*In capillary tube systems where non-equalized pressures may occur atcompressor start, or in areas with short power supply drop-outs, a startingcapacitor can be used for ensuring a successful start (CSIR).
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF7FN 47.2 81.3 94.3 46.3 61.4 67.4 44.5 22.6 80.7 55.7
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF7FN 80.3 75.3 39.3 90.4 86.4 53.5 31.6 10.7 99.7 25.8
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF7FN 25.2 96.2 18.2 78.2 50.3 52.3 54.3 66.3 88.3 00.4
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF7FN 031 861 391 402 832 172 303 633 963 583
38 CK.40.A5.22 July 2003
July 2003 CG.43.V3.22 1
Compressor NF9FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps 105G5936
Copper-plated steel Rubber plugs 105G5928
Copper Rubber plugs
Data Sheet (Replaces CG.43.V2.22)
NF9FKStandard CompressorR134a115-127V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 45 (-35 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type RSIR/CSIR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 100°F (38°C) F2
110°F (43°C) F2
Application
Design
Displacement cu.in. (cm3) 0.51 (8.35)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 23.0 (10.5)
MotorMotor size watt 290
LRA (rated after 4 sec.UL984) LST A 34.0
Cut-in current LST A 34.0
Resistance, main and start winding (77°F) Ω 2.0/7.5
Approvals UL984/CSA-C22.2
105G
5928
NF9FK
8398
-5
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
9.92"(252)
A B
C
ED
6.54
(166
)"
8367
3.01
"(78
)
2.13
"(5
4)
4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
" (75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
*In capillary tube systems where non-equalized pressuresmay occur at compressor start, or in areas with short powersupply drop-outs, a starting capacitor can be used for en-suring a successful start (CSIR).
Dimensions 105G5928 105G5936
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09) 0.242-0.249 (6.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.242-0.249 (6.2±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09) 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 80
R
NF9FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8398
-6
July 2003 CK.40.A5.22 39
2 CG.43.V3.22 July 2003
8230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF9FN 474 276 248 329 6321 1261 7802 7462 8033 1863
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
KF9FN 211 061 002 912 392 483 594 626 287 078
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
(pos.1)
(pos.2)
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF9FN 124 895 847 028 8901 9341 3581 8432 2392 1623
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
KF9FN 86.0 08.0 98.0 49.0 01.1 72.1 64.1 56.1 48.1 49.1
seciveD .giF KF9FN
).lcnirotcetorp(yalergnitratS 2a)1.sop(
3314U711
stnemurtsnIsaxeT"4/3rotcetorP 6-ZFA62TRM
).lcnirotcetorp(yalergnitratS 2ac
2.sop( )
*4314U711
023roticapacgnitratS µF *2205U711
stnemurtsnIsaxeT"4/3rotcetorP 6-ZEA03TRM
revoC b 1201U711
feilerdroC d 7130U711
roticapacfeilerdroC cd 9430U711
seirosseccagnitnuoM )8295G501(rosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
seirosseccagnitnuoM )6395G501(rosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
Test conditions1. Condensing temperature2. Ambient & suction gas temp.3. Liquid temperatureFan cooling F
2, 115V 60Hz
ASHRAE1. LBP 130°F (54,4°C)2. 90°F (32°C)3. 90°F (32°C)1. MBP 130°F (54,4 °C)2. 95°F (35°C)3. 115°F (46°C)
EN 12900/CECOMAF1. 55°C (131°F)2. 32°C (90°F)3. 55°C (131°F)
*In capillary tube systems where non-equalized pressures may occur atcompressor start, or in areas with short power supply drop-outs, a startingcapacitor can be used for ensuring a successful start (CSIR).
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF9FN 35.2 99.2 53.3 25.3 21.4 77.4 74.5 91.6 39.6 92.7
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF9FN 48.2 63.3 77.3 69.3 36.4 73.5 61.6 89.6 18.7 32.8
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF9FN 20.3 61.3 72.3 23.3 15.3 27.3 69.3 22.4 15.4 66.4
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF9FN 761 002 322 332 762 203 933 973 324 744
40 CK.40.A5.22 July 2003
July 2003 CG.43.W3.22 1
Compressor NF9.5FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps 105G5937
Copper-plated steel Rubber plugs 105G5929
Copper Rubber plugs
Data Sheet (Replaces CG.43.W2.22)
NF9.5FKStandard CompressorR134a115-127V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 45 (-35 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type RSIR/CSIR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 100°F (38°C) F2
110°F (43°C) F2
Application
Design
Displacement cu.in. (cm3) 0.57 (9.40)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 23.0 (10.5)
MotorMotor size watt 360
LRA (rated after 4 sec.UL984) LST A 35.5
Cut-in current LST A 35.5
Resistance, main and start winding (77°F) Ω 1.4/7.6
Approvals UL984/CSA-C22.2
105G
5929
NF9.5FK
8398
-7
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
9.92"(252)
A B
C
ED
6.54
(166
)"
8367
3.01
"(78
)
2.13
"(5
4)
4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
" (75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
*In capillary tube systems where non-equalized pressuresmay occur at compressor start, or in areas with short powersupply drop-outs, a starting capacitor can be used for en-suring a successful start (CSIR).
Dimensions 105G5929 105G5937
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09) 0.242-0.249 (6.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.242-0.249 (6.2±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09) 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 80
R
NF9.5FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8398
-8
July 2003 CK.40.A5.22 41
2 CG.43.W3.22 July 2003
8230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.9FN 335 057 539 4201 6631 7871 8922 9092 3363 1404
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
KF5.9FN 621 871 222 342 423 424 445 986 958 559
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
(pos.1)
(pos.2)
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.9FN 474 766 138 019 4121 7851 9302 0852 0223 0853
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
KF5.9FN 66.0 87.0 88.0 29.0 80.1 52.1 34.1 36.1 28.1 29.1
seciveD .giF KF5.9FN
).lcnirotcetorp(yalergnitratS 2a)1.sop(
1414U711
stnemurtsnIsaxeT"4/3rotcetorP 6-ZFA62TRM
).lcnirotcetorp(yalergnitratS 2ac
2.sop( )
*2414U711
014roticapacgnitratS µF *8205U711
stnemurtsnIsaxeT"4/3rotcetorP 6-ZFA62TRM
revoC b 1201U711
feilerdroC d 7130U711
roticapacfeilerdroC cd 9430U711
seirosseccagnitnuoM )9295G501(rosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
seirosseccagnitnuoM )7395G501(rosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
Test conditions1. Condensing temperature2. Ambient & suction gas temp.3. Liquid temperatureFan cooling F
2, 115V 60Hz
ASHRAE1. LBP 130°F (54,4°C)2. 90°F (32°C)3. 90°F (32°C)1. MBP 130°F (54,4 °C)2. 95°F (35°C)3. 115°F (46°C)
EN 12900/CECOMAF1. 55°C (131°F)2. 32°C (90°F)3. 55°C (131°F)
*In capillary tube systems where non-equalized pressures may occur atcompressor start, or in areas with short power supply drop-outs, a startingcapacitor can be used for ensuring a successful start (CSIR).
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.9FN 291 822 352 462 103 833 973 224 074 694
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.9FN 54.3 95.3 07.3 67.3 59.3 61.4 04.4 76.4 69.4 11.5
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.9FN 77.2 82.3 96.3 88.3 55.4 82.5 70.6 98.6 37.7 51.8
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.9FN 74.2 29.2 82.3 54.3 40.4 96.4 93.5 11.6 58.6 22.7
42 CK.40.A5.22 July 2003
July 2003 CD.43.Q7.22 1
Compressor NF5.5FX
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steelRubber plugs
105G5623
105G5633*)
Copper Rubber plugs 105G5627
Height in. (mm) A 7.76 (197)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Oil cooler location/I.D. in. (mm) F 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Data Sheet (Replaces CD.43.Q6.22)
NF5.5FXStandard CompressorR134a115-127V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 45 (-35 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) O/F1
Application
Design
Displacement cu.in. (cm3) 0.37 (6.13)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 17.5 (500)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 22.0 (10.0)
MotorMotor size watt 265
LRA (rated after 4 sec.UL984) HST A 22.2
Cut-in current HST A 22.2
Resistance, main and start winding (77°F) Ω 2.0/3.1
Approvals UL984/CSA-C22.2
Dimensions
105G
5623
NF5.5FX
8309
-10
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
R
NF5.5FX115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8309
-11
*) Oil cooler version
S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
9.92"(252)
A B
C
ED
6.54
(166
)"
8336
3.01
"(78
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25°
35°15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
F
1.57
"(4
0)1.
57"
(40)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
July 2003 CK.40.A5.22 43
2 CD.43.Q7.22 July 2003
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF5.5FN 892 184 726 596 059 7521 5261 5602 8852 4882
seciveD .giF XF5.5FN
).lcnirotcetorp(yalergnitratS2a
7214U711
.rtsnIsaxeT"4/3rotcetorP 6-NEA63PRM
082roticapacgnitratS µF c 5205U711
revoC b 1201U711
feilerdroC d 9430U711
roticapacroffeilerdroC cd 9430U711
seirosseccagnitnuoM.pmocenoroftniojtloB.pmocenoroftniojtloB.pmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF5.5FN 562 824 855 816 548 6111 2441 1381 3922 5552
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
XF5.5FN 07 411 841 561 522 792 483 884 116 086
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF5.5FN 4.79 531 951 961 002 822 552 082 503 713
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF5.5FN 81.2 43.2 54.2 05.2 76.2 58.2 40.3 42.3 44.3 45.3
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF5.5FN 60.3 75.3 59.3 21.4 67.4 15.5 83.6 73.7 94.8 90.9
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF5.5FN 27.2 71.3 15.3 66.3 32.4 09.4 66.5 45.6 25.7 50.8
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
XF5.5FN 37.0 58.0 39.0 89.0 31.1 03.1 05.1 47.1 00.2 31.2
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Fan cooling F
1, 115V 60Hz
44 CK.40.A5.22 July 2003
July 2003 CG.43.X4.22 1
Compressor NF7FX
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steelRubber plugs
105G5723
105G5733*)
Copper Rubber plugs 105G5727
Height in. (mm) A 7.76 (197)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Oil cooler location/I.D. in. (mm) F 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Data Sheet (Replaces CG.43.X3.22)
NF7FXStandard CompressorR134a115-127V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 45 (-35 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) O/F1
Application
Design
Displacement cu.in. (cm3) 0.44 (7.27)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 17.5 (500)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 22.0 (10.0)
MotorMotor size watt 310
LRA (rated after 4 sec.UL984) HST A 28.0
Cut-in current HST A 28.0
Resistance, main and start winding (77°F) Ω 1.9/6.6
Approvals UL984/CSA-C22.2
Dimensions
105G
5723
NF7FXR134a
8309
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
SUCTIONCONNECTOR
R
NF7FX115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8309
-3
*) Oil cooler version
S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
9.92"(252)
A B
C
ED
6.54
(166
)"
8336
3.01
"(78
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25°
35°15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
F
1.57
"(4
0)1.
57"
(40)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
July 2003 CK.40.A5.22 45
2 CG.43.X4.22 July 2003
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF7FN 414 816 287 858 7411 5941 8191 8242 7303 3833
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF7FN 863 055 596 367 9101 8231 3071 3512 2962 7992
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
XF7FN 89 741 681 402 272 553 454 475 717 997
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF7FN 541 181 502 512 742 972 013 143 273 883
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF7FN 79.2 41.3 62.3 23.3 05.3 07.3 09.3 11.4 33.4 54.4
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF7FN 58.2 24.3 28.3 00.4 36.4 63.5 91.6 21.7 61.8 27.8
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF7FN 45.2 40.3 93.3 55.3 21.4 67.4 94.5 23.6 42.7 37.7
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
XF7FN 76.0 18.0 09.0 49.0 01.1 72.1 64.1 86.1 29.1 50.2
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Fan cooling F
1, 115V 60Hz
seciveD .giF XF7FN
).lcnirotcetorp(yalergnitratS
2a
1604U711
.rtsnIsaxeT"4/3rotcetorP 6-NEA03PRM
acirtcelE"4/3rotcetorP 60/2770T
082roticapacgnitratS µF c 5205U711
revoC b 1201U711
feilerdroC d 9430U711
roticapacroffeilerdroC cd 9430U711
seirosseccagnitnuoM.pmocenoroftniojtloB.pmocenoroftniojtloB.pmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
46 CK.40.A5.22 July 2003
July 2003 CD.43.R8.22 1
Height in. (mm) A 7.76 (197)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Oil cooler location/I.D. in. (mm) F 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Data Sheet (Replaces CD.43.R7.22)
NF9FXStandard CompressorR134a115-127V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) LBP: -20 to 0 (-28.9 to -17.8)
MBP: 0 to 45 (-17.8 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at LBP: F2
max. ambient temperature 110°F (43°C) MBP: O/F1
Application
Design
Displacement cu.in. (cm3) 0.51 (8.35)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 17.5 (500)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 22.0 (10.0)
MotorMotor size watt 310
LRA (rated after 4 sec.UL984) HST A 28.0
Cut-in current HST A 28.0
Resistance, main and start winding (77°F) Ω 1.9/6.6
Approvals UL984/CSA-C22.2
Dimensions
105G
5920
NF9FX
8309
-2
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
R
NF9FX115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8309
-4
*) Oil cooler version
S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
Compressor NF9FX
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steelRubber plugs
105G5920
105G5930*)
Copper Rubber plugs 105G5927
9.92"(252)
A B
C
ED
6.54
(166
)"
8336
3.01
"(78
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25°
35°15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
F
1.57
"(4
0)1.
57"
(40)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
July 2003 CK.40.A5.22 47
2 CD.43.R8.22 July 2003
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF9FN 476 158 539 1621 2661 8412 1372 0243 8083
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF9FN 995 657 138 1211 6741 7091 2242 1303 4733
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
XF9FN 061 202 222 992 493 905 646 908 009
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF9FN 312 532 542 772 113 743 683 924 254
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF9FN 23.3 44.3 05.3 96.3 29.3 71.4 54.4 57.4 19.4
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF9FN 28.2 22.3 04.3 40.4 57.4 94.5 82.6 70.7 74.7
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
XF9FN 57.0 68.0 19.0 80.1 62.1 64.1 76.1 88.1 99.1
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF9FN 71.3 26.3 28.3 55.4 43.5 91.6 70.7 89.7 34.8
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Fan cooling F
1, 115V 60Hz
seciveD .giF XF9FN
).lcnirotcetorp(yalergnitratS2a
9214U711
.rtsnIsaxeT"4/3rotcetorP 6-ZFA22TRM
082roticapacgnitratS µF c 5205U711
revoC b 1201U711
feilerdroC d 9430U711
roticapacroffeilerdroC cd 9430U711
seirosseccagnitnuoM.pmocenoroftniojtloB.pmocenoroftniojtloB.pmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
48 CK.40.A5.22 July 2003
July 2003 CD.43.X5.22 1
Data Sheet (Replaces CD.43.X4.22)
NF10FXStandard CompressorR134a115-127V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) LBP: -20 to 0 (-28.9 to -17.8)
MBP: 0 to 45 (-17.8 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at LBP: F2
max. ambient temperature 110°F (43°C) MBP: F1
Application
Design
Displacement cu.in. (cm3) 0.62 (10.09)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 16.1 (460)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 22.0 (10.0)
MotorMotor size watt 330
LRA (rated after 4 sec.UL984) HST A 30.0
Cut-in current HST A 30.0
Resistance, main and start winding (77°F) Ω 1.7/5.4
Approvals UL984/CSA-C22.2
Dimensions
Height in. (mm) A 7.76 (197)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
105G
5941
NF10FX
8309
-7
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
R
NF10FX115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8309
-8
S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
Compressor NF10FX
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 105G5941
Copper Rubber plugs 105G5946
9.92"(252)
A B
C
ED
6.54
(166
)"
8367
3.01
"(78
)
2.13
"(5
4)
4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
July 2003 CK.40.A5.22 49
2 CD.43.X5.22 July 2003
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
Accessories
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Fan cooling F
1, 115V 60Hz
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF01FN 647 059 6401 1141 4581 1932 6303 5083 0424
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF01FN 366 548 039 4521 7461 3212 3962 2733 6573
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
XF01FN 871 722 942 633 044 765 917 998 1001
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF01FN 522 052 162 203 543 193 834 784 215
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF01FN 84.3 46.3 17.3 79.3 52.4 55.4 78.4 12.5 93.5
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF01FN 59.2 83.3 65.3 61.4 87.4 34.5 51.6 39.6 43.7
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
XF01FN 97.0 19.0 59.0 11.1 72.1 54.1 36.1 48.1 59.1
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
XF01FN 23.3 08.3 00.4 86.4 83.5 21.6 39.6 18.7 92.8
seciveD .giF XF01FN
).lcnirotcetorp(yalergnitratS2a
9214U711
.rtsnIsaxeT"4/3rotcetorP 6-ZFA22TRM
023roticapacgnitratS µF c 2205U711
revoC b 1201U711
feilerdroC d 9430U711
roticapacroffeilerdroC cd 9430U711
seirosseccagnitnuoM.pmocenoroftniojtloB.pmocenoroftniojtloB.pmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
50 CK.40.A5.22 July 2003
July 2003 CD.43.Y5.22 1
Data Sheet (Replaces CD.43.Y4.22)
NF11FXStandard CompressorR134a115V 60Hz
General
Application MBP
Evaporating temperature range °F (°C) 10 to 45 (-12.2 to 7.2)
Voltage range V/Hz 95 - 127 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) F2
Application
Design
Displacement cu.in. (cm3) 0.68 (11.15)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 22.0 (10.0)
MotorMotor size watt 530
LRA (rated after 4 sec.UL984) HST A 43.1
Cut-in current HST A 43.1
Resistance, main and start winding (77°F) Ω 1.0/3.6
Approvals UL984/CSA-C22.2
DimensionsHeight in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
105G
5945
NF11FX
8309
-5
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
R
NF11FX115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8309
-9
S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
Compressor NF11FX
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 105G5945
Copper Rubber plugs 105G5947
9.92"(252)
A B
C
ED
6.54
(166
)"
8367
3.01
"(78
)
2.13
"(5
4)
4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
July 2003 CK.40.A5.22 51
2 CD.43.Y5.22 July 2003
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Power consumption watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
012.21-
027.6-
031.1-
044.4
145
542.7
XF11FN 5571 1722 0982 7263 8073 4404
C°\.pmoCF°\.pmoC
2.21-01
7.6-02
1.1-03
4.404
514
2.754
XF11FN 964 606 177 769 889 8701
F°\.pmoCC°\.pmoC
012.21-
027.6-
031.1-
044.4
145
542.7
XF11FN 093 144 594 055 655 875
F°\.pmoCC°\.pmoC
012.21-
027.6-
031.1-
044.4
145
542.7
XF11FN 54.5 18.5 91.6 06.6 46.6 18.6
F°\.pmoCC°\.pmoC
012.21-
027.6-
031.1-
044.4
145
542.7
XF11FN 05.4 41.5 48.5 95.6 76.6 00.7
C°\.pmoCF°\.pmoC
2.21-01
7.6-02
1.1-03
4.404
514
2.754
XF11FN 02.1 73.1 55.1 57.1 77.1 58.1
Test conditions ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 95°F (35°C) 32°C (90°F)Liquid temperature 115°F (46°C) 55°C (131°F)Fan cooling F
1, 115V 60Hz
seciveD .giF XF11FN
).lcnirotcetorp(yalergnitratS2a
3214U711
.rtsnIsaxeT"4/3rotcetorP 6-ZFA61TRM
014roticapacgnitratS µF c 8205U711
revoC b 1201U711
feilerdroC d 9430U711
roticapacroffeilerdroC cd 9430U711
seirosseccagnitnuoM.pmocenoroftniojtloB.pmocenoroftniojtloB.pmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
52 CK.40.A5.22 July 2003
July 2003 CH.43.W3.22 1
Compressor NF6.1FX.2
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 105G5631
Copper Rubber plugs
Data Sheet (Replaces CH.43.W2.22)
NF6.1FX.2Standard CompressorR134a115-127V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 45 (-35 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) O/F1
Application
Design
Displacement cu.in. (cm3) 0.37 (6.13)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 22.0 (10.0)
Motor
Motor size watt 265
LRA (rated after 4 sec.UL984) LST A 22.2
Cut-in current LST A 22.2
Resistance, main and start winding (77°F) Ω 2.0/3.1
Approvals UL984/CSA-C22.2
105G
5631
NF6.1FX.2R134a
8516
DANFOSS COMPRESSORS
SUCTIONCONNECTOR
Barcode onwhite background
Green background
Blue stripe
Application
9.92"(252)
A B
C
ED
6.54
(166
)"
8367
3.01
"(78
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
Dimensions
Height in. (mm) A 7.76 (197)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
R
NF6.1FX.2115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8516
-5
July 2003 CK.40.A5.22 53
2 CH.43.W3.22 July 2003
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF1.6FN 907 6861
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
2.XF1.6FN 30.1 66.1
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Fan cooling F
1, 115V 60Hz
preliminary data
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF1.6FN 036 6941
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF1.6FN 361 042
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF1.6FN 05.2 09.2
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF1.6FN 53.4 30.7
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF1.6FN 78.3 32.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
2.XF1.6FN 861 893
seciveD .giF 2.XF1.6FN
).lcnirotcetorp(yalergnitratS2a
7214U711
.rtsnIsaxeT"4/3rotcetorP 6-NEA63PRM
082roticapacgnitratS µF c 5205U711
revoC b 1201U711
feilerdroC d 9430U711
roticapacroffeilerdroC cd 9430U711
seirosseccagnitnuoM.pmocenoroftniojtloB.pmocenoroftniojtloB.pmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
54 CK.40.A5.22 July 2003
July 2003 CH.43.X3.22 1
Compressor NF7.3FX.2
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 105G5722
Copper Rubber plugs
Data Sheet (Replaces CH.43.X2.22)
NF7.3FX.2Standard CompressorR134a115-127V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 45 (-35 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) O/F1
Application
Design
Displacement cu.in. (cm3) 0.44 (7.27)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 22.0 (10.0)
Motor
Motor size watt 310
LRA (rated after 4 sec.UL984) LST A 28.0
Cut-in current LST A 28.0
Resistance, main and start winding (77°F) Ω 1.9/6.6
Approvals UL984/CSA-C22.2
105G
5722
NF7.3FX.2R134a
8516
-2
DANFOSS COMPRESSORS
SUCTIONCONNECTOR
Barcode onwhite background
Green background
Blue stripe
Application
9.92"(252)
A B
C
ED
6.54
(166
)"
8367
3.01
"(78
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
Dimensions
Height in. (mm) A 7.76 (197)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
R
NF7.3FX.2115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8516
-6
July 2003 CK.40.A5.22 55
2 CH.43.X3.22 July 2003
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF3.7FN 438 4991
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
2.XF3.7FN 10.1 16.1
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Fan cooling F
1, 115V 60Hz
preliminary data
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF3.7FN 247 1771
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF3.7FN 791 392
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF3.7FN 02.3 07.3
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF3.7FN 92.4 18.6
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF3.7FN 87.3 40.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
2.XF3.7FN 891 274
seciveD .giF 2.XF3.7FN
).lcnirotcetorp(yalergnitratS
2a
1604U711
.rtsnIsaxeT"4/3rotcetorP 6-NEA03PRM
acirtcelE"4/3rotcetorP 60/2770T
082roticapacgnitratS µF c 5205U711
revoC b 1201U711
feilerdroC d 9430U711
roticapacroffeilerdroC cd 9430U711
seirosseccagnitnuoM.pmocenoroftniojtloB.pmocenoroftniojtloB.pmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
56 CK.40.A5.22 July 2003
July 2003 CH.43.Y3.22 1
Compressor NF8.4FX.2
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 105G5918
Copper Rubber plugs
Data Sheet (Replaces CH.43.Y2.22)
NF8.4FX.2Standard CompressorR134a115-127V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) LBP: -20 to 0 (-28.9 to -17.8)
MBP: 0 to 45 (-17.8 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at LBP: F2
max. ambient temperature 110°F (43°C) MBP: O/F1
Application
Design
Displacement cu.in. (cm3) 0.51 (8.35)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 22.0 (10.0)
Motor
Motor size watt 310
LRA (rated after 4 sec.UL984) LST A 28.0
Cut-in current LST A 28.0
Resistance, main and start winding (77°F) Ω 1.9/6.6
Approvals UL984/CSA-C22.2
105G
5918
NF8.4FX.2R134a
8516
-3
DANFOSS COMPRESSORS
SUCTIONCONNECTOR
Barcode onwhite background
Green background
Blue stripe
Application
9.92"(252)
A B
C
ED
6.54
(166
)"
8367
3.01
"(78
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
"(102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
Dimensions
Height in. (mm) A 7.76 (197)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
R
NF8.4FX.2115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8516
-7
July 2003 CK.40.A5.22 57
2 CH.43.Y3.22 July 2003
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF4.8FN 459 4622
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
2.XF4.8FN 20.1 06.1
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Fan cooling F
1, 115V 60Hz
preliminary data
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF4.8FN 848 0102
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF4.8FN 322 633
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF4.8FN 04.3 00.4
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF4.8FN 82.4 37.6
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
2.XF4.8FN 08.3 89.5
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
2.XF4.8FN 722 635
seciveD .giF 2.XF4.8FN
).lcnirotcetorp(yalergnitratS2a
9214U711
.rtsnIsaxeT"4/3rotcetorP 6-ZFA22TRM
082roticapacgnitratS µF c 5205U711
revoC b 1201U711
feilerdroC d 9430U711
roticapacroffeilerdroC cd 9430U711
seirosseccagnitnuoM.pmocenoroftniojtloB.pmocenoroftniojtloB.pmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
58 CK.40.A5.22 July 2003
July 2003 CD.43.U4.22 1
Height in. (mm) A 7.72 (196)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Data Sheet (Replaces CD.43.U3.22)
FF8.5FKStandard CompressorR134a115V 60Hz
General
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 45 (-35 to 7.2)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) F2
Application
Design
Displacement cu.in. (cm3) 0.48 (7.95)
Oil quantity fl.oz. (cm3) 13.5 (400)
Maximum refrigerant charge oz. (g) 32.0 (900)
Free gas vol. in compressor housing fl.oz. (cm3) 47.3 (1400)
Weight without electrical equipment lbs. (kg) 23.3 (10.6)
MotorMotor size watt 255
LRA (rated after 4 sec.UL984) LST A 29.4
Cut-in current LST A 29.4
Resistance, main and start winding (77°F) Ω 2.0/9.1
Approvals UL984/CSA-C22.2
Dimensions
103G
5810
FF8.5FK
8332
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
FF8.5FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8332
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
A B
E
CD
8337
24°
40°
40°
8.03"(204)
9.84"(250)
7.87"(200)
ø0.63"(16)
ø0.38"(9.7)
ø0. "75 (19)
4.00
"(10
1.6)
2.76
"(70
)2.
34"
(59.
5)
6.14
"(15
6)
4.10"(103) 3.98"(101)4.33"(110)
2.17
"(5
5)1.26
"(3
2)4.
80"(
122)
5.87
"(14
9)
5.75
"(14
6)
5.31
"(13
5)
1.38
"(3
5)
6.50"(165)
6.69"(170)
7.32"(186)
2.17
"(55
)
Compressor (CU-plated steel connectors) FF8.5FK
Codenumber 103G5810
July 2003 CK.40.A5.22 59
2 CD.43.U4.22 July 2003
8230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
Accessories
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
EER at MBP conditions (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Capacity at MBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.8FF 532 314 365 536 119 0521 2661 7512 5472 8703
seciveD .giF KF5.8FF
).lcnirotcetorp(yalergnitratS2a
2604U711
.rtsnIsaxeT"4/3rotcetorP 6-LE62PRM
revoC b 1201U711
feilerdroC d 9430U711
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.8FF 902 763 005 465 908 0111 5741 4191 3342 6272
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
KF5.8FF 55 79 231 941 512 592 293 905 746 527
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.8FF 131 951 181 191 622 462 603 053 693 024
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.8FF 16.2 77.2 09.2 69.2 81.3 34.3 27.3 40.4 04.4 95.4
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.8FF 97.1 95.2 11.3 23.3 30.4 37.4 44.5 71.6 39.6 23.7
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
KF5.8FF 95.1 03.2 67.2 59.2 85.3 02.4 38.4 74.5 41.6 94.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
KF5.8FF 24.0 16.0 37.0 87.0 59.0 11.1 82.1 54.1 36.1 27.1
Test conditions ASHRAE (LBP) ASHRAE (MBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Fan cooling F
2, 115V 60Hz
60 CK.40.A5.22 July 2003
July 2003 CG.42.V4.22 1
Compressor TTE3FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 102G3340
Copper Rubber plugs 102G3341
E
Cor
DD
orC
51°
20°
45°
8370
BA
30°
31.5°28°
4.13
"(10
5)
4.13
" (10
5)
4.21
"(10
7)
2.80
"(71
)
1.14
"(2
9)
3.78"(96)
4.61"(117)
4.02"(102)
8.90"(226)
6.93"(176)
6.18
"(15
7)
2.34
"(59
.5)
2.60
"(6
6)
ø0.63"(16)6.50"(165)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
ø0.14"(3.6)
Data Sheet (Replaces CG.42.V3.22)
TTE3FKEnergy-optimized CompressorR134a115V 60Hz
General
Design
Motor
102G
3340
TTE3FK
8424
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
Application LBP
Evaporating temperature range °F (°C) -31 to 23 (-35 to -5)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR/RSCR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application R
TTE3FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8424
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
Displacement cu.in. (cm3) 0.19 (3.13)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 54.2 (1600)
Weight without electrical equipment lbs. (kg) 16.5 (7.5)
Motor size watt 98
LRA (rated after 4 sec.UL984) LST A 6.0
Cut-in current LST A 16.0
Resistance, main and start winding (77°F) Ω 5.4/4.2
Approvals UL984/CSA-C22.2
Dimensions
Height in. (mm) A 6.42 (163)
B 6.26 (159)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.189-0.193 (4.9+0.10/-0)
Compressors on a pallet pcs. 125
July 2003 CK.40.A5.22 61
2 CG.42.V4.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.,preliminary data
seciveD .giF KF3ETT
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
)CR.w(1a)evitanretla(
6016U711
023A-021A-605J
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
)CR.o.w(1a)evitanretla(
5016U711
021A-021A-605J
revoC b 6201U711
51roticapacnuR µF )lanoitpo( e 8117-711
)stnemurtsnIsaxeT(rotcetorP f3133U711
35-YYBFN562MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
KF3ETT 86 27
F°\.pmoC1C°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
KF3ETT 31.1 51.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
KF3ETT 36.3 09.3
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
KF3ETT 68.0 29.0
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
KF3ETT 011 181 842 082 004 055 056
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
KF3ETT 62 24 85 66 49 031 451
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
8234
12
34
b
f
a1
Main winding
Motor protector
Start winding
a1
62 CK.40.A5.22 July 2003
July 2003 CD.42.W4.22 1
E
Cor
DD
orC
51°
20°
45°
8370
BA
30°
31.5°28°
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
2.80
" (71
)
1.14
"(2
9)
3.78"(96)
4.61"(117)
4.02"(102)
8.90"(226)
6.93"(176)
6.18
"(15
7)
2.34
"(59
.5)
2.60
"(6
6)
ø0.63"(16)6.50"(165)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
ø0.14"(3.6)
Data Sheet (Replaces CD.42.W3.22)
TTE4FEnergy-optimized CompressorR134a115V 60Hz
General
Design
Displacement cu.in. (cm3) 0.23 (3.86)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 60.6 (1790)
Weight without electrical equipment lbs. (kg) 16.5 (7.5)
Motor
Motor size watt 125
LRA (rated after 4 sec.UL984) LST A 8.3
Cut-in current LST A 17.7
Resistance, main and start winding (77°F) Ω 4.2/4.0
Approvals UL984/CSA-C22.2
Dimensions 102G3440 102G3441
102G
3440
TTE4F
8331
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Height in. (mm) A 6.81 (173)
B 6.65 (169)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20) 0.189-0.193 (4.9+0.10/-0)
Compressors on a pallet pcs. 125
R
TTE4F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8331
-2
Compressor TTE4F
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 102G3440
Copper Rubber plugs 102G3441
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
*run capacitor compulsory
July 2003 CK.40.A5.22 63
2 CD.42.W4.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
seciveD .giF F4ETT
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
6016U711
023A-021A-605J
revoC b 6201U711
51roticapacnuR µF )yroslupmoc( e 8117-711
)stnemurtsnIsaxeT(rotcetorP f4033U711
35-YYBFN203MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F4ETT 56 97 98 49 011 621 331
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F4ETT 31.1 12.1 62.1 92.1 93.1 05.1 55.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F4ETT 45.2 04.3 89.3 32.4 40.5 68.5 91.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F4ETT 16.0 28.0 59.0 10.1 12.1 04.1 84.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F4ETT 461 962 653 793 355 047 528
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F4ETT 93 56 58 59 231 771 791
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
64 CK.40.A5.22 July 2003
June 2003 CD.43.B5.22 1
Data Sheet (Replaces CD.43.B4.22)
NLE5.5FEnergy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.37 (6.13)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 25.0 (11.4)
Motor
Motor size watt 150
LRA (rated after 4 sec.UL984) LST A 11.3
Cut-in current LST A 21.8
Resistance, main and start winding (77°F) Ω 3.0/3.7
Approvals UL984/CSA-C22.2
105G
5605
NLE5.5F
8315
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
NLE5.5F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8315
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
Compressor (CU-plated steel connectors) NLE5.5F
Codenumber 105G5605
10.00"(254)
A B
C
ED
6.54
(166
)"
82473.
01"(
78)
2.13
"(5
4)
4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.38
"(6
0.5)
25° 35° 15°
3.68
" (93
.5)
2.97
"(75
.5)
4.04
"(102
.5)
2.76
"(70
)
ø0.63"(16)6.70"(170)
4.00
"(10
1.6)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
1.38
"(3
5)
ø0. "75 (19)
ø0.38"(9.7)
5.20
"(13
2)
Dimensions
Height in. (mm) A 7.76 (198)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
*run capacitor compulsory
July 2003 CK.40.A5.22 65
2 CD.43.B5.22 June 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5.5ELN 68 901 621 431 061 981 002
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5.5ELN 77.0 69.0 11.1 81.1 14.1 66.1 57.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5.5ELN 64.3 22.4 97.4 40.5 48.5 36.6 39.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F5.5ELN 28.0 00.1 41.1 02.1 93.1 75.1 46.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5.5ELN 892 854 306 476 639 1521 8831
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F5.5ELN 07 901 341 061 222 792 923 8223-2
N
N LC
S
b
d
a1
e
a1
Winding protector
Start winding
Main winding
e
seciveD .giF F5.5ELN
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni1a 7100N301
4200N301
revoC b 1102N301
feilerdroC d 0101N301
51roticapacnuR µ )yroslupmoc(F1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.nie 8117-711
0217-711
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
66 CK.40.A5.22 July 2003
June 2003 CG.43.Y2.22 1
Data Sheet (Replaces CG.43.Y1.22)
NLE6FEnergy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.40 (6.58)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 25.0 (11.4)
Motor
Motor size watt 150
LRA (rated after 4 sec.UL984) LST A 11.3
Cut-in current LST A 21.8
Resistance, main and start winding (77°F) Ω 3.0/3.7
Approvals UL984/CSA-C22.2
105G
5606
NLE6F
8315
-4
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
10.00"(254)
A B
C
ED
6.54
(166
)"
8247
3.01
"(78
)
2.13
"(5
4)
4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.38
"(6
0.5)
25° 35° 15°
3.68
" (93
.5)
2.97
"(75
.5)
4.04
"(102
.5)
2.76
"(70
)
ø0.63"(16)6.70"(170)
4.00
"(10
1.6)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
1.38
"(3
5)
ø0. "75 (19)
ø0.38"(9.7)
5.20
"(13
2)
*run capacitor compulsory
Compressor (CU-plated steel connectors) NLE6F
Codenumber 105G5606
Codenumber 105G5609
Height in. (mm) A 7.76 (198)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09) 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09) 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 80
S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
Dimensions 105G5606 105G5609
R
NLE6F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8315
-5
July 2003 CK.40.A5.22 67
2 CG.43.Y2.22 June 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F6ELN 99 021 631 341 861 591 702
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F6ELN 28.0 40.1 91.1 62.1 84.1 17.1 08.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F6ELN 08.3 92.4 18.4 70.5 89.5 69.6 53.7
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F6ELN 09.0 10.1 41.1 02.1 14.1 56.1 47.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F6ELN 573 415 456 627 5001 0631 9151
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F6ELN 98 121 551 271 832 223 063 8223-2
N
N LC
S
b
d
a1
e
a1
Winding protector
Start winding
Main winding
e
seciveD .giF F6ELN
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni1a 7100N301
4200N301
revoC b 1102N301
feilerdroC d 0101N301
51roticapacnuR µ )yroslupmoc(F1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.nie 8117-711
0217-711
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
68 CK.40.A5.22 July 2003
June 2003 CG.43.Z2.22 1
Data Sheet (Replaces CG.43.Z1.22)
NLE7FEnergy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.44 (7.30)
Oil quantity fl.oz. (cm3) 10.8 (320)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 25.0 (11.4)
Motor
Motor size watt 170
LRA (rated after 4 sec.UL984) LST A 13.2
Cut-in current LST A 22.5
Resistance, main and start winding (77°F) Ω 2.6/4.1
Approvals UL984/CSA-C22.2
105G
5702
NLE7F
8315
-6
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
10.00"(254)
A B
C
ED
6.54
(166
)"
8409
3.01
"(78
)
2.13
"(5
4)
4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.38
"(6
0.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
"(102
.5)
2.76
"(70
)
ø0.63"(16)6.70"(170)
4.00
"(10
1.6)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
1.38
"(35
)
ø0. "75 (19)
ø0.38"(9.7)
5.20
"(13
2)
3.94
"(10
0)
*run capacitor compulsory
Compressor (CU-plated steel connectors) NLE7F
Codenumber (large baseplate) 105G5702
Codenumber (small baseplate) 105G5703
Height in. (mm) A 7.76 (198)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09) 0.242-0.249 (6.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.242-0.249 (6.2±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09) 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 80
S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
Dimensions 105G5702 105G5703
R
NLE7F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8315
-7
July 2003 CK.40.A5.22 69
2 CG.43.Z2.22 June 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F7ELN 311 631 451 261 291 422 832
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F7ELN 50.1 32.1 93.1 64.1 27.1 00.2 21.2
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F7ELN 38.3 53.4 38.4 60.5 58.5 86.6 10.7
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F7ELN 29.0 40.1 51.1 02.1 93.1 95.1 66.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F7ELN 534 095 347 128 0211 8941 6661
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F7ELN 401 141 771 591 662 653 693 8223-2
N
N LC
S
b
d
a1
e
a1
Winding protector
Start winding
Main winding
e
seciveD .giF F7ELN
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni1a 7100N301
4200N301
revoC b 1102N301
feilerdroC d 0101N301
51roticapacnuR µ )yroslupmoc(F1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.nie 8117-711
0217-711
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
70 CK.40.A5.22 July 2003
July 2003 CD.42.V4.22 1
51°
20°
45°
8368
BA
30°
31.5°28°
C D
E
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
2.80
"(71
)
1.14
"(2
9)
3.78"(96)
4.61"(117)
4.02"(102)
8.90"(226)
6.93"(176)
6.18
"(15
7)
2.34
"(59
.5)
2.60
"(6
6)
ø0.63"(16)6.50"(165)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
ø0.14"(3.6)
Data Sheet (Replaces CD.42.V3.22)
TTY5FHigh Energy-optimized CompressorR134a115V 60Hz
General
Design
Displacement cu.in. (cm3) 0.34 (5.54)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 60.6 (1790)
Weight without electrical equipment lbs. (kg) 17.6 (8.0)
Motor
Motor size watt 180
LRA (rated after 4 sec.UL984) LST A 11.3
Cut-in current LST A 21.5
Resistance, main and start winding (77°F) Ω 3.2/3.7
Approvals UL984/CSA-C22.2
Dimensions 102G3547 102G3549
102G
3547
TTY5F
8322
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Height in. (mm) A 6.81 (173)
B 6.65 (169)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20) 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 125
R
TTY5F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8322
-2
Compressor TTY5F
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 102G3547
Copper Rubber plugs 102G3549
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
*run capacitor compulsory
July 2003 CK.40.A5.22 71
2 CD.42.V4.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5YTT 68 501 911 621 741 171 281
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5YTT 29.0 70.1 81.1 32.1 24.1 26.1 17.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5YTT 12.3 19.3 64.4 07.4 45.5 83.6 17.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F5YTT 77.0 49.0 70.1 31.1 33.1 35.1 06.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F5YTT 572 214 235 095 418 1901 8121
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F5YTT 66 99 821 141 591 162 192
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
seciveD .giF F5YTT
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
6016U711
023A-021A-605J
revoC b 6201U711
51roticapacnuR µF )yroslupmoc( e 8117-711
)stnemurtsnIsaxeT(rotcetorP f2033U711
35-YYBFN413MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
72 CK.40.A5.22 July 2003
July 2003 CG.42.R2.22 1
Data Sheet (Replaces CG.42.R1.22)
TTY6FHigh Energy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.35 (5.70)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 60.7 (1790)
Weight without electrical equipment lbs. (kg) 17.6 (8.0)
Motor
Motor size watt 200
LRA (rated after 4 sec.UL984) LST A 14.4
Cut-in current LST A 25.2
Resistance, main and start winding (77°F) Ω 2.8/3.2
Approvals UL984/CSA-C22.2
102G
3647
TTY6F
8322
-3
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
R
TTY6F115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8322
-4
51°
20°
45°
8368
BA
30°
31.5°28°
C D
E
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
2.80
"(71
)
1.14
"(2
9)3.78"(96)
4.61"(117)
4.02"(102)
8.90"(226)
6.93"(176)
6.18
"(15
7)
2.34
"(59
.5)
2.60
"(6
6)
ø0.63"(16)6.50"(165)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
ø0.14"(3.6)
Dimensions
Height in. (mm) A 6.81 (173)
B 6.65 (169)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 125
*run capacitor compulsory
Compressor TTY6F
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 102G3647
Copper Rubber plugs
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 73
2 CG.42.R2.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F6YTT 19 211 721 331 451 871 981
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F6YTT 12.3 88.3 93.4 16.4 63.5 90.6 63.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F6YTT 77.0 39.0 50.1 01.1 82.1 64.1 25.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/h
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
F6YTT 07 501 331 641 791 952 782
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F6YTT 50.1 81.1 92.1 43.1 25.1 37.1 18.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
F6YTT 492 734 555 116 528 4801 2021
seciveD .giF F6YTT
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
6016U711
023A-021A-605J
revoC b 6201U711
51roticapacnuR µF )yroslupmoc( e 8117-711
)stnemurtsnIsaxeT(rotcetorP f3033U711
35-YYBFK414MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
74 CK.40.A5.22 July 2003
July 2003 CD.43.S4.22 1
Data Sheet (Replaces CD.43.S3.22)
NTY5.5FKHigh Energy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.37 (6.13)
Oil quantity fl.oz. (cm3) 9.9 (290)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 23.8 (10.8)
Motor
Motor size watt 190
LRA (rated after 4 sec.UL984) LST A 10.5
Cut-in current LST A 20.4
Resistance, main and start winding (77°F) Ω 3.1/4.0
Approvals UL984/CSA-C22.2
105G
5620
NTY5.5FK
8330
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
R
NTY5.5FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8330
-2
9.92"(252)
A B
C
ED
6.54
(166
)"
8252
3.35
"(85
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
" (102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
Dimensions
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
*run capacitor compulsory
Compressor NTY5.5FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 105G5620
Copper Rubber plugs
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 75
2 CD.43.S4.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF5.5YTN 001 811 231 931 461 391 702
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF5.5YTN 19.3 93.4 28.4 20.5 27.5 54.6 47.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF5.5YTN 39.0 40.1 41.1 81.1 53.1 25.1 16.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/h
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF5.5YTN 39 221 151 561 222 592 333
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF5.5YTN 09.0 60.1 91.1 52.1 74.1 47.1 68.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF5.5YTN 983 615 736 796 839 7421 1931
seciveD .giF KF5.5YTN
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
6016U711
023A-021A-605J
revoC b 6201U711
51roticapacnuR µF )yroslupmoc( e 8117-711
)stnemurtsnIsaxeT(rotcetorP f6033U711
35-YYBFK914MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
76 CK.40.A5.22 July 2003
July 2003 CH.43.A2.22 1
Data Sheet (Replaces CH.43.A1.22)
NTY6FKHigh Energy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.40 (6.58)
Oil quantity fl.oz. (cm3) 9.9 (290)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 23.8 (10.8)
Motor
Motor size watt 190
LRA (rated after 4 sec.UL984) LST A 10.5
Cut-in current LST A 20.4
Resistance, main and start winding (77°F) Ω 3.1/4.0
Approvals UL984/CSA-C22.2
105G
5621
NTY6FK
8330
-5
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
R
NTY6FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8330
-6
9.92"(252)
A B
C
ED
6.54
(166
)"
8252
3.35
"(85
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
" (102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
Dimensions
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
*run capacitor compulsory
Compressor NTY6FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 105G5621
Copper Rubber plugs
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 77
2 CH.43.A2.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF6YTN 801 031 841 651 381 412 722
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF6YTN 69.3 44.4 68.4 50.5 57.5 05.6 08.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF6YTN 59.0 60.1 61.1 12.1 83.1 55.1 36.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/h
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF6YTN 201 931 271 881 252 333 073
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF6YTN 49.0 61.1 23.1 93.1 46.1 09.1 20.2
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF6YTN 724 975 817 687 4501 1931 7451
seciveD .giF KF6YTN
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
6016U711
023A-021A-605J
revoC b 6201U711
51roticapacnuR µF )yroslupmoc( e 8117-711
)stnemurtsnIsaxeT(rotcetorP f6033U711
35-YYBFK914MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
78 CK.40.A5.22 July 2003
July 2003 CD.43.T4.22 1
Data Sheet (Replaces CD.43.T3.22)
NTY7FKHigh Energy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) F1
Application
Design
Displacement cu.in. (cm3) 0.44 (7.27)
Oil quantity fl.oz. (cm3) 9.9 (290)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 23.8 (10.8)
Motor
Motor size watt 190
LRA (rated after 4 sec.UL984) LST A 11.2
Cut-in current LST A 21.6
Resistance, main and start winding (77°F) Ω 2.9/2.9
Approvals UL984/CSA-C22.2
105G
5720
NTY7FK
8330
-3
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
R
NTY7FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8330
-4
9.92"(252)
A B
C
ED
6.54
(166
)"
8252
3.35
"(85
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
" (102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
Dimensions
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
*run capacitor compulsory
Compressor NTY7FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 105G5720
Copper Rubber plugs
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 79
2 CD.43.T4.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF7YTN 711 241 061 961 991 532 152
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF7YTN 02.4 46.4 50.5 52.5 49.5 66.6 49.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF7YTN 10.1 11.1 12.1 62.1 24.1 95.1 66.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/h
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF7YTN 811 851 491 212 482 473 614
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF7YTN 11.1 13.1 84.1 55.1 48.1 71.2 13.2
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF7YTN 194 756 018 588 4811 4651 0471
seciveD .giF KF7YTN
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
6016U711
023A-021A-605J
revoC b 6201U711
51roticapacnuR µF )yroslupmoc( e 8117-711
)stnemurtsnIsaxeT(rotcetorP f6033U711
35-YYBFK914MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
80 CK.40.A5.22 July 2003
July 2003 CH.43.B2.22 1
Data Sheet (Replaces CH.43.B1.22)
NTY9FKHigh Energy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) F1
Application
Design
Displacement cu.in. (cm3) 0.51 (8.35)
Oil quantity fl.oz. (cm3) 9.9 (290)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 23.8 (10.8)
Motor
Motor size watt 230
LRA (rated after 4 sec.UL984) LST A 13.4
Cut-in current LST A 24.2
Resistance, main and start winding (77°F) Ω 2.4/3.2
Approvals UL984/CSA-C22.2
105G
5921
NTY9FK
8330
-7
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
R
NTY9FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8330
-8
9.92"(252)
A B
C
ED
6.54
(166
)"
8252
3.35
"(85
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
" (102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
Dimensions
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
*run capacitor compulsory
Compressor NTY9FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 105G5921
Copper Rubber plugs
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 81
2 CH.43.B2.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF9YTN 531 461 681 691 132 172 092
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF9YTN 31.4 95.4 00.5 91.5 78.5 75.6 48.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF9YTN 99.0 01.1 02.1 42.1 14.1 75.1 46.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/h
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF9YTN 431 181 322 342 523 724 474
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF9YTN 62.1 84.1 76.1 57.1 80.2 54.2 16.2
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF9YTN 755 357 039 6101 6531 4871 2891
seciveD .giF KF9YTN
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
6016U711
023A-021A-605J
revoC b 6201U711
51roticapacnuR µF )yroslupmoc( e 8117-711
)stnemurtsnIsaxeT(rotcetorP f0133U711
35-ZZBDK987MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
82 CK.40.A5.22 July 2003
July 2003 CH.43.C2.22 1
Data Sheet (Replaces CH.43.C1.22)
NTY10FKHigh Energy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) F1
Application
Design
Displacement cu.in. (cm3) 0.62 (10.09)
Oil quantity fl.oz. (cm3) 9.9 (290)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.7 (2360)
Weight without electrical equipment lbs. (kg) 23.8 (10.8)
Motor
Motor size watt 285
LRA (rated after 4 sec.UL984) LST A 20.3
Cut-in current LST A 30.7
Resistance, main and start winding (77°F) Ω 1.8/3.1
Approvals UL984/CSA-C22.2
105G
5922
NTY10FK
8330
-9
DANFOSS COMPRESSORSBarcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
R
NTY10FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8330
-10
9.92"(252)
A B
C
ED
6.54
(166
)"
8252
3.35
"(85
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
" (102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
Dimensions
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
*run capacitor compulsory
Compressor NTY10FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs 105G5922
Copper Rubber plugs
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 83
2 CH.43.C2.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF01YTN 461 002 622 832 182 133 453
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF01YTN 78.3 63.4 87.4 79.4 36.5 03.6 65.6
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF01YTN 39.0 50.1 41.1 91.1 53.1 15.1 75.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/h
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF01YTN 251 902 952 382 873 994 555
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF01YTN 98.1 21.2 13.2 14.2 87.2 12.3 14.3
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF01YTN 536 378 2801 3811 1851 5802 1232
seciveD .giF KF01YTN
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
6016U711
023A-021A-605J
revoC b 6201U711
51roticapacnuR µF )yroslupmoc( e 8117-711
)stnemurtsnIsaxeT(rotcetorP f1133U711
35-ZZBDK508MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
84 CK.40.A5.22 July 2003
July 2003 CH.43.K3.22 1
Compressor NTX5.2FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs
Copper Rubber plugs 105G5650
Data Sheet (Replaces CH.43.K2.22)
NTX5.2FKHigh Energy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.31 (5.20)
Oil quantity fl.oz. (cm3) 9.2 (270)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.5 (2340)
Weight without electrical equipment lbs. (kg) 24.9 (11.3)
Motor
Motor size watt 124
LRA (rated after 4 sec.UL984) LST A 7.0
Cut-in current LST A 14.7
Resistance, main and start winding (77°F) Ω 5.6/4.6
Approvals UL984/CSA-C22.2
105G
5650
NTX5.2FKR134a
8423
DANFOSS COMPRESSORS
SUCTIONCONNECTOR
Barcode onwhite background
Green background
Blue stripe
Application
R
NTX5.2FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8423
-2
9.92"(252)
A B
C
ED
6.54
(166
)"
8252
3.35
"(85
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
" (102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
Dimensions
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
* run capacitor compulsory
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 85
2 CH.43.K3.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 12 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF2.5XTN 1.17 3.98 201 701 521 441 251
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF2.5XTN 98.3 47.4 43.5 06.5 84.6 04.7 77.7
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF2.5XTN 29.0 21.1 62.1 23.1 35.1 57.1 38.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/h
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF2.5XTN 8.46 001 821 241 291 252 972
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF2.5XTN 26.0 87.0 98.0 49.0 21.1 03.1 83.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF2.5XTN 772 424 345 006 218 6601 2811
seciveD .giF KF2.5XTN
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
6016U711
023A-021A-605J
revoC b 6201U711
21roticapacnuR µF )yroslupmoc( e 6217-711
)stnemurtsnIsaxeT(rotcetorP f2033U711
35-YYBFN413MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
86 CK.40.A5.22 July 2003
July 2003 CH.43.L3.22 1
Compressor NTX5.7FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs
Copper Rubber plugs 105G5651
Data Sheet (Replaces CH.43.L2.22)
NTX5.7FKHigh Energy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.34 (5.71)
Oil quantity fl.oz. (cm3) 9.2 (270)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.5 (2340)
Weight without electrical equipment lbs. (kg) 24.9 (11.3)
Motor
Motor size watt 182
LRA (rated after 4 sec.UL984) LST A 10.9
Cut-in current LST A 21.2
Resistance, main and start winding (77°F) Ω 2.8/3.5
Approvals UL984/CSA-C22.2
105G
5651
NTX5.7FKR134a
8423
-3
DANFOSS COMPRESSORS
SUCTIONCONNECTOR
Barcode onwhite background
Green background
Blue stripe
Application
R
NTX5.7FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8423
-4
9.92"(252)
A B
C
ED
6.54
(166
)"
8252
3.35
"(85
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
" (102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
Dimensions
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
* run capacitor compulsory
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 87
2 CH.43.L3.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF7.5XTN 3.28 6.89 211 811 931 261 271
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF7.5XTN 58.3 97.4 34.5 07.5 16.6 55.7 39.7
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF7.5XTN 19.0 31.1 82.1 43.1 65.1 87.1 78.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/h
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF7.5XTN 6.47 111 341 851 812 092 423
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF7.5XTN 27.0 88.0 10.1 60.1 42.1 44.1 25.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF7.5XTN 713 274 606 076 919 6221 7631
seciveD .giF KF7.5XTN
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
6016U711
023A-021A-605J
revoC b 6201U711
51roticapacnuR µF )yroslupmoc( e 8117-711
)stnemurtsnIsaxeT(rotcetorP f2133U711
35-YYBFN913MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
88 CK.40.A5.22 July 2003
July 2003 CH.43.M3.22 1
Compressor NTX7.3FK
Connector-material Sealing Code number
Copper-plated steel Aluminium caps
Copper-plated steel Rubber plugs
Copper Rubber plugs 105G5750
Data Sheet (Replaces CH.43.M2.22)
NTX7.3FKHigh Energy-optimized CompressorR134a115V 60Hz
General
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 103 - 127 /60
Motor type RSCR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Design
Displacement cu.in. (cm3) 0.44 (7.29)
Oil quantity fl.oz. (cm3) 9.2 (270)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 79.5 (2340)
Weight without electrical equipment lbs. (kg) 24.9 (11.3)
Motor
Motor size watt 182
LRA (rated after 4 sec.UL984) LST A 10.9
Cut-in current LST A 21.2
Resistance, main and start winding (77°F) Ω 2.8/3.5
Approvals UL984/CSA-C22.2
105G
5750
NTX7.3FKR134a
8423
-5
DANFOSS COMPRESSORS
SUCTIONCONNECTOR
Barcode onwhite background
Green background
Blue stripe
Application
R
NTX7.3FK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8423
-6
9.92"(252)
A B
C
ED
6.54
(166
)"
8252
3.35
"(85
)
2.13
"(5
4)4.45"(113)
5.00"(127)
47°27°51°
4.69"(119)
2.83
(72)
" 2.34
"(5
9.5)
25° 35° 15°
3.68
"(93
.5)
2.97
"(75
.5)
4.04
" (102
.5)
6.70"(170)
8.03"(204)
6.50"(165)
8.10"(205)
7.32"(186)
ø0.63"(16)
ø0. "75 (19)
ø0.38"(9.7)
2.76
"(70
)
4.00
"(10
1.6)
1.38
"(35
)
5.20
"(13
2)
Dimensions
Height in. (mm) A 8.00 (203)
B 7.76 (197)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
* run capacitor compulsory
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temperatureequal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 89
2 CH.43.M3.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, with RC 15 µF, 115V 60Hz, PTC consumption incl.
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF3.7XTN 301 621 441 151 871 702 912
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF3.7XTN 92.4 69.4 05.5 57.5 36.6 75.7 59.7
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF3.7XTN 20.1 71.1 03.1 63.1 65.1 87.1 78.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/h
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
KF3.7XTN 501 841 781 602 082 173 314
8233
12
34
b
f
a1
e
Main winding
Motor protector
Start winding
a1
e
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF3.7XTN 39.0 31.1 82.1 53.1 06.1 78.1 89.1
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
KF3.7XTN 344 726 097 078 1811 7651 4471
seciveD .giF KF3.7XTN
).rtsnIsaxeT(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a2016U711
3B4AE8IT
)snemeiS(ecivedgnitratsCTPygrenefossoldecuderhtiw
1a)evitanretla(
6016U711
023A-021A-605J
revoC b 6201U711
51roticapacnuR µF )yroslupmoc( e 8117-711
)stnemurtsnIsaxeT(rotcetorP f2133U711
35-YYBFN913MT4-IT
seirosseccagnitnuoMrosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
90 CK.40.A5.22 July 2003
July 2003 CG.42.N2.22 1
Compressor TFS4.5FT
Connector-material Sealing Code number
Copper-plated steel Aluminium caps 102G3439
Copper-plated steel Rubber plugs102G3433
102G3436
Copper Rubber plugs
51°
20°
45°
8246
BA
30°
31.5°28°
C D
E
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
2.80
"(71
)
1.14
"(2
9)
3.78"(96)
4.61"(117)
4.02"(102)
8.90"(226)
6.93"(176)
6.18
"(15
7)
2.34
"(59
.5)
2.60
"(6
6)
ø0.63"(16)6.50"(165)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
ø0.14"(3.6)
Data Sheet (Replaces CG.42.N1.22)
TFS4.5FTTropical CompressorR134a115-127V 60Hz
General
Design
Displacement cu.in. (cm3) 0.29 (4.63)
Oil quantity fl.oz. (cm3) 6.1 (180)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 60.7 (1790)
Weight without electrical equipment lbs. (kg) 14.7 (6.7)
Motor
Motor size watt 160
LRA (rated after 4 sec.UL984) LST A 20.1
Cut-in current LST A 20.1
Resistance, main and start winding (77°F) Ω 3.3/8.8
Approvals UL984/CSA-C22.2
102G
3433
TFS4.5FT
8320
-3
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
Application LBP
Evaporating temperature range °F (°C) -31 to 14 (-35 to -10)
Voltage range V/Hz 95 - 135 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
R
TFS4.5FT115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8320
-2
Dimensions 102G3433 102G3436 102G3439
Height in. (mm) A 6.81 (173)
B 6.65 (169)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09) 0.242-0.249 (6.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09) 0.242-0.249 (6.2±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20) 0.252-0.259 (6.5±0.09) 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 125
S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
July 2003 CK.40.A5.22 91
2 CG.42.N2.22 July 2003
Accessories
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, 115V 60Hz
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
TF5.4SFT 09 801 121 721 841 271 281
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
TF5.4SFT 88.1 49.1 99.1 20.2 21.2 52.2 13.2
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
TF5.4SFT 27.2 61.3 65.3 57.3 04.4 90.5 63.5
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
TF5.4SFT 46.0 57.0 48.0 98.0 40.1 12.1 72.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
TF5.4SFT 542 043 134 774 456 578 479
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
TF5.4SFT 85 08 201 311 551 802 1328230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
seciveD .giF TF5.4SFT
).lcninoxilK(yalergnitratS2a
3114U711
stnemurtsnIsaxeT"4/3rotcetorP 6-LIA93PRM
revoC b 1201U711
feilerdroC d 9430U711
seirosseccagnitnuoM )63/3343G201(rosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
seirosseccagnitnuoM )9343G201(rosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
.niØ)mm(
5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
92 CK.40.A5.22 July 2003
July 2003 CD.42.R7.22 1
51°
20°
45°
8368
BA
30°
31.5°28°
C D
E
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
2.80
"(71
)
1.14
"(2
9)
3.78"(96)
4.61"(117)
4.02"(102)
8.90"(226)
6.93"(176)
6.18
"(15
7)
2.34
"(59
.5)
2.60
"(6
6)
ø0.63"(16)6.50"(165)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
ø0.14"(3.6)
Data Sheet (Replaces CD.42.R6.22)
TFS4.5FTTropical CompressorR134a115-127V 60Hz
General
Design
Displacement cu.in. (cm3) 0.29 (4.63)
Oil quantity fl.oz. (cm3) 9.5 (280)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 57.3 (1690)
Weight without electrical equipment lbs. (kg) 14.9 (6.8)
Motor
Motor size watt 160
LRA (rated after 4 sec.UL984) LST A 20.1
Cut-in current LST A 20.1
Resistance, main and start winding (77°F) Ω 3.3/8.8
Approvals UL984/CSA-C22.2
102G
3432
TFS4.5FT
8320
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
Application
R134aSUCTIONCONNECTOR
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 45 (-35 to 7.2)
Voltage range V/Hz 95 - 135 /60
Motor type RSIR/CSIR*
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) F1
Application R
TFS4.5FT115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8320
-2
*In capillary tube systems where non-equalized pressures may occurat compressor start, or in areas with short power supply drop-outs, astarting capacitor can be used for ensuring a successful start (CSIR).
Compressor TFS4.5FT
Connector-material Sealing Code number
Copper-plated steel Aluminium caps 102G3452
Copper-plated steel Rubber plugs 102G3432
Copper Rubber plugs 102G3438
Dimensions 102G3452/32 102G3438
Height in. (mm) A 6.81 (173)
B 6.65 (169)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09) 0.252-0.259 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09) 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20) 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 125
July 2003 CK.40.A5.22 93
2 CD.42.R7.22 July 2003
Accessories
seciveD .giF TF5.4SFT
).lcnirotcetorp(yalergnitratS 2a)1.sop(
3114U711
stnemurtsnIsaxeT"4/3rotcetorP 6-LIA93PRM
).lcnirotcetorp(yalergnitratS 2ac
2.sop( )
*6214U711
023roticapacgnitratS µF *2205U711
stnemurtsnIsaxeT"4/3rotcetorP 6-LIA93PRM
revoC b 1201U711
feilerdroC d 9430U711
roticapacfeilerdroC cd 9430U711
seirosseccagnitnuoM )83/2343G201(rosserpmocenorofnitniojtloBrosserpmocenorofnitniojtloBrosserpmocenorofnino-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
seirosseccagnitnuoM )2543G201(rosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
031.1-
044.4
542.7
TF5.4SFT 09 801 121 721 841 271 281 791 522 452 072
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
031.1-
044.4
542.7
TF5.4SFT 88.1 49.1 99.1 20.2 21.2 52.2 13.2 14.2 06.2 38.2 69.2
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
031.1-
044.4
542.7
TF5.4SFT 27.2 61.3 65.3 57.3 04.4 90.5 63.5 67.5 34.6 60.7 73.7
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
7.6-02
1.1-03
4.404
2.754
TF5.4SFT 46.0 57.0 48.0 98.0 40.1 12.1 72.1 73.1 25.1 76.1 47.1
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
031.1-
044.4
542.7
TF5.4SFT 542 043 134 774 456 578 479 5311 5441 3971 7891
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
7.6-02
1.1-03
4.404
2.754
TF5.4SFT 85 08 201 311 551 802 132 962 343 524 174
8230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
8226
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
(pos.1)
(pos.2)
*In capillary tube systems where non-equalized pressures may occur at com-pressor start, or in areas with short powersupply drop-outs, a starting capacitor canbe used for ensuring a successful start(CSIR).
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54,4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Static cooling, 115V 60Hz
94 CK.40.A5.22 July 2003
October 2001 CG.44.I1.22 1
Data Sheet
SC12FTXTropical CompressorR134a115-127V 60Hz
Design
Displacement cu.in. (cm3) 0.78 (12.90)
Oil quantity fl.oz. (cm3) 20.3 (600)
Maximum refrigerant charge oz. (g) 45.5 (1300)
Free gas vol. in compressor housing fl.oz. (cm3) 49.4 (1460)
Weight without electrical equipment lbs. (kg) 27.7 (12.6)
Motor
Motor size watt 490
LRA (rated after 4 sec.UL984) HST A 38.2
Cut-in current HST A 38.2
Resistance, main and start winding (77°F) Ω 1.2/4.2
Approvals UL984/CSA-C22.2
104G
7205
SC12FTX
8452
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
SC12FTX115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8452
-2S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
B A
10.04"(255)
D C
E
8324
B2
B1
0.12
"(3)
8.58"(218)
ø "(0.63 16) ø0.75"(19)
6.69"(170)
7.01"(178)
8.03"(204)
6.50"(165)
7.32"(186)
2.76
"(70
)
5.91
" (15
0)
1.38
" (35
)4"
(101
.6)
5"(1
27)
5"(127)
ø0.38"(9.7)
5.94
"(15
1)
4.21"(107)
4.53"(115)
2.17
"(55
)
37° 37°
2.17
" (55
)
2.48
"(63
)
4.21"(107)
2.48
"(63
)
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 23 (-35 to -5)
Voltage range*) V/Hz 95 - 135 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) F2
Application
Compressor (CU-plated steel connectors) SC12FTX
Code number 104G7205
General
Height in. (mm) A 8.23 (209)
B 8.00 (203)
B1 7.20 (183)
B2 3.94 (100)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Dimensions
*) Not applicable below -20°F evaporating temperature in 110°Fambient temperature above 127V.
July 2003 CK.40.A5.22 95
2 CG.44.I1.22 October 2001
Accessories
seciveD .giF XTF21CS
yalergnitratS 2a 2106U711
revoC b 8002N301
042roticapacgnitratS µF c 3205U711
feilerdroC d 4001N301
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
8222
10 11
131214
b
d
a2
c
c
Main windingStart winding
Winding protector
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Fan cooling F
2, 115V 60Hz
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
XTF21CS 365 988 5511 0821 3571 4232 3852 8003
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
7.6-02
XTF21CS 231 012 372 303 514 945 016 017
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
XTF21CS 442 203 343 063 914 874 205 735
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
XTF21CS 10.5 82.5 84.5 75.5 88.5 02.6 43.6 55.6
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
XTF21CS 03.2 49.2 73.3 55.3 81.4 68.4 51.5 06.5
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
7.6-02
XTF21CS 45.0 07.0 08.0 48.0 99.0 51.1 12.1 23.1
96 CK.40.A5.22 July 2003
November 2001 CG.44.J2.22 1
Data Sheet (Replaces CG.44.J1.22)
SC15FTXTropical CompressorR134a115-127V 60Hz & 100V 50/60Hz
Design
Displacement cu.in. (cm3) 0.93 (15.30)
Oil quantity fl.oz. (cm3) 20.3 (600)
Maximum refrigerant charge oz. (g) 45.5 (1300)
Free gas vol. in compressor housing fl.oz. (cm3) 49.4 (1460)
Weight without electrical equipment lbs. (kg) 27.7 (12.6)
Motor
Motor size watt 540
LRA (rated after 4 sec.UL984) HST A 42
Cut-in current HST A 42
Resistance, main and start winding (77°F) Ω 1.0/4.3
Approvals UL984/CSA-C22.2
104G
7505
SC15FTX
8452
-3
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
SC15FTX115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8452
-4S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
B A
10.04"(255)
D C
E
8324
B2
B1
0.12
"(3)
8.58"(218)
ø "(0.63 16) ø0.75"(19)
6.69"(170)
7.01"(178)
8.03"(204)
6.50"(165)
7.32"(186)
2.76
"(70
)
5.91
" (15
0)
1.38
" (35
)4"
(101
.6)
5"(1
27)
5"(127)
ø0.38"(9.7)
5.94
"(15
1)
4.21"(107)
4.53"(115)
2.17
"(55
)
37° 37°
2.17
" (55
)
2.48
"(63
)
4.21"(107)
2.48
"(63
)
Application LBP/MBP
Evaporating temperature range °F (°C) -31 to 23 (-35 to -5)
Voltage range V/Hz 95 - 135 /60
90 - 110 /50
90 - 110 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) F2
Application
Compressor (CU-plated steel connectors) SC15FTX
Code number 104G7505
General
Height in. (mm) A 8.23 (209)
B 8.00 (203)
B1 7.20 (183)
B2 3.94 (100)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Dimensions
July 2003 CK.40.A5.22 97
2 CG.44.J2.22 November 2001
Accessories
seciveD .giF XTF51CS
yalergnitratS 2a 0206U711
revoC b 8002N301
042roticapacgnitratS µF c 3205U711
feilerdroC d 4001N301
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
8222
10 11
131214
b
d
a2
c
c
Main windingStart winding
Winding protector
Test conditions ASHRAE EN 12900/CECOMAFCondensing temperature 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 32°C (90°F)Liquid temperature 90°F (32°C) 55°C (131°F)Fan cooling F
2, 115V 60Hz
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER (ASHRAE) Btu/Wh
Capacity (EN 12900/CECOMAF) watt
Capacity (ASHRAE) Btu/hF°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
XTF51CS 117 4901 4041 0551 6902 0572 6403 1353
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
7.6-02
XTF51CS 761 852 233 763 794 256 227 638
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
XTF51CS 732 523 283 504 184 555 585 236
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
XTF51CS 28.4 72.5 06.5 57.5 62.6 18.6 30.7 93.7
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
4101-
027.6-
XTF51CS 00.3 73.3 86.3 38.3 63.4 59.4 02.5 85.5
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
01-41
7.6-02
XTF51CS 27.0 08.0 78.0 19.0 30.1 71.1 32.1 23.1
98 CK.40.A5.22 July 2003
July 2003 CD.42.E5.22 1
Data Sheet (Replaces CD.42.E4.22)
TL2.5GUniversal CompressorR134a115V 60Hz
General
Design
Displacement cu.in. (cm3) 0.16 (2.61)
Oil quantity fl.oz. (cm3) 9.5 (280)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 54.3 (1600)
Weight without electrical equipment lbs. (kg) 14.7 (6.7)
Motor
Motor size watt 105
LRA (rated after 4 sec.UL984) LST A 7.0
Cut-in current LST A 16.0
Resistance, main and start winding (77°F) Ω 5.3/4.9
Approvals UL984/CSA-C22.2
102G
3255
TL2.5G
8312
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
TL2.5G115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8312
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
BA
30° 31.5°
28°
8.74"(222)
6.93"(176)
51°
20°
45°
8402
2.80
"(71
)
1.14
"(2
9)
3.78"(96)
4.61"(117)
4.02"(102)
6.18
"(15
7)
2.38
"(60
.5)
2.60
"(6
6)
ø0.63"(16)
ø0.14"(3.6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
6.50"(165)
E
Cor
DD
orC
ø0.35"(9)
2.76
"(70
)
1.38
"(3
5)
3.94
"(10
0)
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
Application LBP/HBP
Evaporating temperature range °F (°C) -13 to 59 (-25 to 15)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) S
Application
Compressor TL2.5G
Connector-material Sealing Baseplate Code number
Copper-plated steel Alumin. caps small 102G3255
Copper-plated steel Rubber plugs large 102G3257
Copper Rubber plugs large
Height in. (mm) A 6.42 (163)
B 6.26 (159)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 125
Dimensions
July 2003 CK.40.A5.22 99
2 CD.42.E5.22 July 2003
8217-2
N
N LC
b
d
a1
a1
Winding protector
Start windingMain winding
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
Accessories
Capacity at HBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G5.2LT 071 091 972 204 755 647 969 3901 6221 8841
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G5.2LT 051 961 842 653 394 066 758 669 3801 2131
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
5195
G5.2LT 14 54 76 69 331 871 132 062 192 353
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G5.2LT 96 27 18 19 101 311 421 131 731 941
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G5.2LT 22.1 32.1 82.1 43.1 14.1 84.1 65.1 06.1 46.1 37.1
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
5195
G5.2LT 95.0 46.0 38.0 60.1 13.1 85.1 58.1 99.1 21.2 63.2
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G5.2LT 64.2 66.2 64.3 34.4 05.5 36.6 97.7 63.8 49.8 79.9
Test conditions1. Condensing temperature2. Ambient & suction gas temp.3. Liquid temperatureStatic cooling , 115V 60Hz,PTC consumption incl.
ASHRAE1. LBP 130°F (54,4°C)2. 90°F (32°C)3. 90°F (32°C)1. HBP 130°F (54,4 °C)2. 95°F (35°C)3. 115°F (46°C)
EN 12900/CECOMAF1. 55°C (131°F)2. 32°C (90°F)3. 55°C (131°F)
EER at HBP conditions (ASHRAE) Btu/WhF°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G5.2LT 81.2 63.2 70.3 29.3 78.4 78.5 88.6 93.7 98.7 97.8
seciveD .giF G5.2LT
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni
1a 3000N301
3200N301
revoC b 1102N301
feilerdroC d 0101N301
seirosseccagnitnuoM )5523G201(rosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
seirosseccagnitnuoM )7523G201(rosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
100 CK.40.A5.22 July 2003
July 2003 CD.42.F5.22 1
Compressor TL4G
Connector-material Sealing Code number
Copper-plated steel Aluminium caps 102G3460
Copper-plated steel Rubber plugs 102G3462
Copper Rubber plugs
Data Sheet (Replaces CD.42.F4.22)
TL4GUniversal CompressorR134a100-115V 50/60Hz
General
Design
Displacement cu.in. (cm3) 0.23 (3.86)
Oil quantity fl.oz. (cm3) 9.5 (280)
Maximum refrigerant charge oz. (g) 14.0 (400)
Free gas vol. in compressor housing fl.oz. (cm3) 54.3 (1600)
Weight without electrical equipment lbs. (kg) 16.7 (7.5)
Motor
Motor size watt 170
LRA (rated after 4 sec.UL984) LST/HST A 12.2/14.2
Cut-in current LST/HST A 22.6/14.2
Resistance, main and start winding (77°F) Ω 3.2/3.4
Approvals UL984/CSA-C22.2
102G
3460
TL4G
8313
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
TL4G115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8313
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
BA
30°
31.5°28°
4.13
"(10
5)
4.13
"(10
5)
4.21
"(10
7)
8.74"(222)
6.93"(176)
51°
20°
45°
82612.
80"(
71)
1.14
"(2
9)3.78"(96)
4.61"(117)
4.02"(102)
6.18
"(15
7)
2.38
"(60
.5)
2.60
"(66
)
ø0.63"(16)
ø0.14"(3.6)
ø0.75"(19)
6.70"(170)
7.01"(178)
8.03"(204)
4.00
"(10
1.6)
2.76
"(70
)
5.35
"(13
6)
6.50"(165)
E
Cor
DD
orC
Application LBP/HBP
Evaporating temperature range °F (°C) -31 to 59 (-35 to 15)
Voltage range V/Hz 90 - 127 /50,60
Motor type RSIR/CSIR
Max. ambient temperature V/°F (°C) 115 / 110 (43)
at Voltage V/°F (°C) 100 / 100 (38)
Comp. cooling at max.
ambient temperature 110°F (43°C) S
100°F (38°C) S
Application
Dimensions
Height in. (mm) A 6.81 (173)
B 6.65 (169)
Suction connector location/I.D. in. (mm) C 0.252-0.259 (6.5±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.202-0.205 (5.0+0.12/0.20)
Compressors on a pallet pcs. 125
July 2003 CK.40.A5.22 101
2 CD.42.F5.22 July 2003
8217-2
N
N LC
b
d
a1
a1
Winding protector
Start windingMain winding
Accessories
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
Capacity at HBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G4LT 131 302 272 603 144 216 428 8701 0831 0551 3371 7902
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G4LT 611 081 142 172 193 245 927 459 0221 9631 0351 9481
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
5195
G4LT 13 94 56 37 501 641 791 752 823 863 214 794
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G4LT 17 28 19 69 111 921 741 761 781 791 702 522
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G4LT 96.1 27.1 47.1 57.1 97.1 68.1 69.1 01.2 03.2 14.2 55.2 38.2
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G4LT 38.1 74.2 79.2 91.3 69.3 67.4 06.5 74.6 93.7 78.7 73.8 23.9
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
5195
G4LT 44.0 95.0 17.0 67.0 59.0 41.1 33.1 45.1 67.1 78.1 99.1 12.2
LST
seciveD .giF G4LT
ecivedgnitratsCTP1/4 sedaps)mm3.6(.ni
3/ 61 sedaps)mm8.4(.ni
1a 3000N301
3200N301
yalergnitratS 2a 3006U711
042roticapacgnitratS µF c 3205U711
revoC b 1102N301
feilerdroC d 0101N301
seirosseccagnitnuoM )0643G201(rosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
seirosseccagnitnuoM )2643G201(rosserpmocenoroftniojtloBrosserpmocenoroftniojtloBrosserpmocenorofno-panS
)mm(.niØ5/8 )61(3/4 )91(5/8 )61(
6491-8119491-8117491-811
8219
10 11
131214
b
d
a2
c
c
Main winding Start windingWinding protector
HST
Test conditions1. Condensing temperature2. Ambient & suction gas temp.3. Liquid temperatureStatic cooling , 115V 60Hz,PTC consumption incl.
ASHRAE1. LBP 130°F (54,4°C)2. 90°F (32°C)3. 90°F (32°C)1. HBP 130°F (54,4 °C)2. 95°F (35°C)3. 115°F (46°C)
EN 12900/CECOMAF1. 55°C (131°F)2. 32°C (90°F)3. 55°C (131°F)
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G4LT 36.1 91.2 46.2 38.2 15.3 22.4 59.4 27.5 35.6 59.6 93.7 22.8
EER at HBP conditions (ASHRAE) Btu/Wh
102 CK.40.A5.22 July 2003
July 2003 CD.43.C5.22 1
Data Sheet (Replaces CD.43.C4.22)
FF6GKUniversal CompressorR134a115V 60Hz
Design
Displacement cu.in. (cm3) 0.38 (6.24)
Oil quantity fl.oz. (cm3) 13.5 (400)
Maximum refrigerant charge oz. (g) 32.0 (900)
Free gas vol. in compressor housing fl.oz. (cm3) 47.3 (1400)
Weight without electrical equipment lbs. (kg) 23.3 (10.6)
Motor
Motor size watt 205
LRA (rated after 4 sec.UL984) LST A 25.0
Cut-in current LST A 25.0
Resistance, main and start winding (77°F) Ω 2.2/8.3
Approvals UL984/CSA-C22.2
103G
5680
FF6GK
8316
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
FF6GK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8316
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
A B
F
E
CD
8254
30° 30°
25°
24°40
°
40°
1.57
"(40)
8.03"(204)
7.01"(178)
10.67"(271)9.84"(250)
7.87"(200)
ø0.63"(16)
ø0.38"(9.7)
ø0. "75 (19)
4.00
"(10
1.6)
2.76
"(70
)2.
34"
(59.
5)
6.14
"(15
6)
2.17
"(55
)
4.82"(122.5) 4.90"(124.5)5.02"(127.5)
2.17
"(5
5)1.26
"(3
2)
1.34
"(3
4)
4.02
"(10
2)
5.12
"(13
0)
5.00
"(12
7)
5.00
"(12
7)
5.91
"(15
0)
1.38
"(35
)
5.00"(127)
6.50"(165)
6.69"(170)
7.32"(186)
Application LBP/HBP
Evaporating temperature range °F (°C) -22 to 50 (-30 to 10)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) O/F1
Application
Compressor (CU-plated steel connectors) FF6GK
Codenumber 103G5680
Codenumber compressor with oil cooler 103G5690
General
Height in. (mm) A 7.72 (196)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Oil cooler location/I.D. in. (mm) F 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Dimensions
July 2003 CK.40.A5.22 103
2 CD.43.C5.22 July 2003
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
Accessories
Capacity at HBP conditions (ASHRAE) Btu/h
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
KG6FF 95.0 07.0 67.0 69.0 02.1 44.1 07.1 69.1 01.2 32.2
EER at HBP conditions (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG6FF 122 813 863 875 058 4811 1851 2402 6922 6652
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG6FF 48.1 49.1 99.1 51.2 43.2 45.2 67.2 99.2 11.3 42.3
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG6FF 101 321 231 261 191 122 152 082 592 013
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
KG6FF 06 68 99 651 922 913 624 055 816 096
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG6FF 64.2 29.2 61.3 40.4 10.5 50.6 31.7 42.8 18.8 93.9
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG6FF 81.2 95.2 08.2 85.3 44.4 53.5 13.6 92.7 87.7 92.8
seciveD .giF KG6FF
rosserpmocdelooc-nafrof).lcnirotcetorp(yalergnitratS2a
5804U711
.rtsnIsaxeT)rosserpmocdelooc-nafrof("4/3rotcetorP 6-LJ83PRM
rosserpmocdelooc-liorof).lcnirotcetorp(yalergnitratS2a
6804U711
4/3rotcetorP )rosserpmocdelooc-liorof(" .rtsnIsaxeT 6-LE04PRM
)dradnats(revoCfeilerdroC
bd
)1.sop(
1201U7119430U711
draoblanimrethtiw)evitanretla(revoC b)2.sop(
4201U711
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
8230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
8231
M
10
5
4
3
2
1
L
N
7
8
6
12
14
13
11
Main windingStart winding
Motor protector
a2
a2
b
(pos.1)
(pos.2)
Test conditions1. Condensing temperature2. Ambient and suction gas temp.3. Liquid temperatureFan cooling F
1, 115V 60Hz
ASHRAE EN 12900/CECOMAF1. LBP 130°F (54,4°C) 55°C (131°F)2. 90°F (32°C) 32°C (90°F)3. 90°F (32°C) 55°C (131°F)1. HBP 130°F (54,4 °C)2. 95°F (35°C)3. 115°F (46°C)
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG6FF 942 853 514 256 959 8331 8871 0132 9952 7092
104 CK.40.A5.22 July 2003
July 2003 CH.43.D2.22 1
Data Sheet (Replaces CH.43.D1.22)
FF7.5GKUniversal CompressorR134a115V 60Hz
Design
Displacement cu.in. (cm3) 0.42 (6.93)
Oil quantity fl.oz. (cm3) 13.5 (400)
Maximum refrigerant charge oz. (g) 32.0 (900)
Free gas vol. in compressor housing fl.oz. (cm3) 47.3 (1400)
Weight without electrical equipment lbs. (kg) 23.3 (10.6)
Motor
Motor size watt 205
LRA (rated after 4 sec.UL984) LST A 25.0
Cut-in current LST A 25.0
Resistance, main and start winding (77°F) Ω 2.2/8.3
Approvals UL984/CSA-C22.2
103G
5780
FF7.5GK
8316
-3
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
FF7.5GK115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8316
-4
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
A B
F
E
CD
8254
30° 30°
25°
24°40
°
40°
1.57
"(40)
8.03"(204)
7.01"(178)
10.67"(271)9.84"(250)
7.87"(200)
ø0.63"(16)
ø0.38"(9.7)
ø0. "75 (19)
4.00
"(10
1.6)
2.76
"(70
)2.
34"
(59.
5)
6.14
"(15
6)
2.17
"(55
)
4.82"(122.5) 4.90"(124.5)5.02"(127.5)
2.17
"(5
5)1.26
"(3
2)
1.34
"(3
4)
4.02
"(10
2)
5.12
"(13
0)
5.00
"(12
7)
5.00
"(12
7)
5.91
"(15
0)
1.38
"(35
)
5.00"(127)
6.50"(165)
6.69"(170)
7.32"(186)
Application LBP/HBP
Evaporating temperature range °F (°C) -22 to 50 (-30 to 10)
Voltage range V/Hz 103 - 127 /60
Motor type RSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) O/F1
Application
Compressor (CU-plated steel connectors) FF7.5GK
Codenumber 103G5780
Codenumber compressor with oil cooler 103G5790
General
Height in. (mm) A 7.72 (196)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Oil cooler location/I.D. in. (mm) F 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Dimensions
July 2003 CK.40.A5.22 105
2 CH.43.D2.22 July 2003
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
Accessories
Capacity at HBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG5.7FF 823 254 615 777 1111 8151 0002 6552 3682 9813
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
KG5.7FF 96.0 87.0 38.0 20.1 32.1 54.1 76.1 98.1 00.2 11.2
EER at HBP conditions (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG5.7FF 192 104 854 986 489 4431 9671 9522 9252 6182
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG5.7FF 09.1 20.2 70.2 82.2 15.2 67.2 30.3 23.3 74.3 26.3
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG5.7FF 511 831 841 281 612 052 682 223 043 953
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
KG5.7FF 97 801 321 681 562 263 774 806 186 757
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG5.7FF 68.2 82.3 94.3 72.4 51.5 60.6 00.7 49.7 14.8 88.8
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
KG5.7FF 45.2 19.2 90.3 97.3 65.4 73.5 91.6 20.7 34.7 48.7
8230
M
1012
1113
14Main winding
Motor protector
Start winding
a2
b
a2
d
Thermostat
8231
M
10
5
4
3
2
1
L
N
7
8
6
12
14
13
11
Main windingStart winding
Motor protector
a2
a2
b
(pos.1)
(pos.2)
Test conditions1. Condensing temperature2. Ambient and suction gas temp.3. Liquid temperatureFan cooling F
1, 115V 60Hz
ASHRAE EN 12900/CECOMAF1. LBP 130°F (54,4°C) 55°C (131°F)2. 90°F (32°C) 32°C (90°F)3. 90°F (32°C) 55°C (131°F)1. HBP 130°F (54,4 °C)2. 95°F (35°C)3. 115°F (46°C)
seciveD .giF KG5.7FF
rosserpmocdelooc-nafrof).lcnirotcetorp(yalergnitratS2a
5804U711
.rtsnIsaxeT)rosserpmocdelooc-nafrof("4/3rotcetorP 6-LJ83PRM
rosserpmocdelooc-liorof).lcnirotcetorp(yalergnitratS2a
6804U711
4/3rotcetorP )rosserpmocdelooc-liorof(" .rtsnIsaxeT 6-LE04PRM
)dradnats(revoCfeilerdroC
bd
)1.sop(
1201U7119430U711
draoblanimrethtiw)evitanretla(revoC b)2.sop(
4201U711
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
106 CK.40.A5.22 July 2003
July 2003 CD.43.D5.22 1
Data Sheet (Replaces CD.43.D4.22)
FF8.5GXUniversal CompressorR134a115V 60Hz
Design
Displacement cu.in. (cm3) 0.48 (7.95)
Oil quantity fl.oz. (cm3) 13.5 (400)
Maximum refrigerant charge oz. (g) 32.0 (900)
Free gas vol. in compressor housing fl.oz. (cm3) 47.3 (1400)
Weight without electrical equipment lbs. (kg) 23.3 (10.6)
Motor
Motor size watt 310
LRA (rated after 4 sec.UL984) HST A 28.0
Cut-in current HST A 28.0
Resistance, main and start winding (77°F) Ω 1.9/6.6
Approvals UL984/CSA-C22.2
103G
5880
FF8.5GX
8317
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
FF8.5GX115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8317
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
A B
E
CD
8255
30° 30°
25°
24°40
°
40°
8.03"(204)
7.01"(178)
9.84"(250)
7.87"(200)
ø0.63"(16)
ø0.38"(9.7)
ø0. "75 (19)
4.00
"(10
1.6)
2.76
"(70
)2.
34"
(59.
5)
6.14
"(15
6)
2.17
"(55
)
4.82"(122.5) 4.90"(124.5)5.02"(127.5)
2.17
"(5
5)1.26
"(3
2)
4.02
"(10
2)
5.12
"(13
0)
5.00
"(12
7)
5.00
"(12
7)
5.91
"(15
0)
1.38
"(35
)
5.00"(127)
6.50"(165)
6.69"(170)
7.32"(186)
Application LBP/HBP
Evaporating temperature range °F (°C) -22 to 50 (-30 to 10)
Voltage range V/Hz 103 - 127 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) F1
Application
Compressor (CU-plated steel connectors) FF8.5GX
Codenumber 103G5880
General
Height in. (mm) A 7.72 (196)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Dimensions
July 2003 CK.40.A5.22 107
2 CD.43.D5.22 July 2003
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
Accessories
Capacity at HBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG5.8FF 344 885 266 759 8231 3771 4922 0982 7123 3653
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
XG5.8FF 16.0 17.0 67.0 39.0 21.1 23.1 25.1 37.1 38.1 39.1
EER at HBP conditions (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG5.8FF 293 225 785 848 6711 0751 9202 5552 2482 6413
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG5.8FF 31.3 22.3 72.3 54.3 76.3 29.3 91.4 64.4 95.4 27.4
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG5.8FF 271 891 902 542 382 123 953 893 814 734
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
XG5.8FF 601 141 851 922 713 324 745 886 567 648
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG5.8FF 75.2 89.2 81.3 09.3 96.4 35.5 83.6 62.7 07.7 41.8
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG5.8FF 82.2 46.2 18.2 64.3 61.4 98.4 56.5 14.6 08.6 91.7
seciveD .giF XG5.8FF
).lcnirotcetorp(yalergnitratS2a
0604U711
.rtsnIsaxeT"4/3rotcetorP 6-NEA63PRM
revoC b 1201U711
082roticapacgnitratS µF c 1405U711
feilerdroC d 9430U711
roticapacfeilerdroC cd 9430U711
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
8232
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
Test conditions ASHRAE (LBP) ASHRAE (HBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Fan cooling F
1, 115V 60Hz
108 CK.40.A5.22 July 2003
July 2003 CH.43.E2.22 1
Data Sheet (Replaces CH.43.E1.22)
FF10GXUniversal CompressorR134a115V 60Hz
Design
Displacement cu.in. (cm3) 0.55 (9.05)
Oil quantity fl.oz. (cm3) 13.5 (400)
Maximum refrigerant charge oz. (g) 32.0 (900)
Free gas vol. in compressor housing fl.oz. (cm3) 47.3 (1400)
Weight without electrical equipment lbs. (kg) 23.3 (10.6)
Motor
Motor size watt 330
LRA (rated after 4 sec.UL984) HST A 29.9
Cut-in current HST A 29.9
Resistance, main and start winding (77°F) Ω 1.7/5.4
Approvals UL984/CSA-C22.2
103G
5980
FF10GX
8317
-3
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
FF10GX115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8317
-4
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
A B
E
CD
8255
30° 30°
25°
24°40
°
40°
8.03"(204)
7.01"(178)
9.84"(250)
7.87"(200)
ø0.63"(16)
ø0.38"(9.7)
ø0. "75 (19)
4.00
"(10
1.6)
2.76
"(70
)2.
34"
(59.
5)
6.14
"(15
6)
2.17
"(55
)
4.82"(122.5) 4.90"(124.5)5.02"(127.5)
2.17
"(5
5)1.26
"(3
2)
4.02
"(10
2)
5.12
"(13
0)
5.00
"(12
7)
5.00
"(12
7)
5.91
"(15
0)
1.38
"(35
)
5.00"(127)
6.50"(165)
6.69"(170)
7.32"(186)
Application LBP/HBP
Evaporating temperature range °F (°C) -22 to 50 (-30 to 10)
Voltage range V/Hz 103 - 127 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) F1
Application
Compressor (CU-plated steel connectors) FF10GX
Codenumber compressor 103G5980
General
Height in. (mm) A 7.72 (196)
B 7.52 (191)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Dimensions
July 2003 CK.40.A5.22 109
2 CH.43.E2.22 July 2003
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
Accessories
Capacity at HBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG01FF 474 536 617 1401 0541 5491 6252 4913 2653 3593
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
XG01FF 95.0 96.0 47.0 19.0 01.1 92.1 05.1 07.1 18.1 19.1
EER at HBP conditions (ASHRAE) Btu/Wh
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG01FF 024 365 536 329 5821 1271 4322 3282 7413 0943
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG01FF 05.3 16.3 66.3 68.3 01.4 73.4 76.4 00.5 71.5 43.5
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG01FF 191 022 232 472 613 953 204 644 864 194
C°\.pmoCF°\.pmoC
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
XG01FF 311 251 171 942 643 464 206 067 748 939
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG01FF 84.2 98.2 90.3 08.3 95.4 24.5 82.6 61.7 16.7 60.8
F°\.pmoCC°\.pmoC
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
XG01FF 02.2 65.2 47.2 73.3 60.4 08.4 55.5 33.6 27.6 11.7
8232
1012
1113
14
M
a2
Main winding
Motor protector
Start winding
c
Thermostat
a2
d
dc
b
c
Test conditions ASHRAE (LBP) ASHRAE (HBP) EN12900/CECOMAFCondensing temperature 130°F (54.4°C) 130°F (54.4°C) 55°C (131°F)Ambient and suction gas temp. 90°F (32°C) 95°F (35°C) 32°C (90°F)Liquid temperature 90°F (32°C) 115°F (46°C) 55°C (131°F)Fan cooling F
1, 115V 60Hz
seciveD .giF XG01FF
).lcnirotcetorp(yalergnitratS
2a
1604U711
.rtsnIsaxeT"4/3rotcetorP 6-NEA03PRM
acirtcelE"4/3rotcetorP 60/2770T
revoC b 1201U711
023roticapacgnitratS µF c 0405U711
feilerdroC d 9430U711
roticapacfeilerdroC cd 9430U711
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
110 CK.40.A5.22 July 2003
June 2003 CD.44.A5.22 1
Data Sheet (Replaces CD.44.A4.22)
SC12GUniversal CompressorR134a115V 60Hz
Design
Displacement cu.in. (cm3) 0.78 (12.90)
Oil quantity fl.oz. (cm3) 20.3 (600)
Maximum refrigerant charge oz. (g) 45.5 (1300)
Free gas vol. in compressor housing fl.oz. (cm3) 49.4 (1460)
Weight without electrical equipment lbs. (kg) 27.7 (12.6)
Motor
Motor size watt 540
LRA (rated after 4 sec.UL984) HST A 42.0
Cut-in current HST A 42.0
Resistance, main and start winding (77°F) Ω 1.0/4.3
Approvals UL984/CSA-C22.2
104G
7250
SC12G
8319
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
SC12G115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8319
-2
S = Static cooling normally sufficientO = Oil coolingF
1= Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2
= Fan cooling 3.0 m/s necessary
B A
10.04"(255)
D C
E
8256
B2
B1
0.12
"(3)
8.58"(218)
ø "(0.63 16) ø0.75"(19)
6.69"(170)
7.01"(178)
8.03"(204)
6.50"(165)
7.32"(186)
2.76
"(70
)
5.91
" (15
0)
1.38
" (35
)4"
(101
.6)
5"(1
27)
5"(127)
ø0.38"(9.7)
5.94
"(15
1)
4.21"(107)
4.53"(115)
2.17
"(55
)
37° 37°
2.17
" (55
)
2.48
"(63
)
4.21"(107)
2.48
"(63
)
1.18"(30)
0.59"(15)
F
Application LBP/HBP
Evaporating temperature range °F (°C) -31 to 50 (-35 to 10)
Voltage range V/Hz 103 - 127 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) O/F1
Application
Compressor (CU-plated steel connectors) SC12G
Codenumber 104G7250
Codenumber compressor with oil cooler 104G7260
General
Height in. (mm) A 8.23 (209)
B 8.00 (203)
B1 7.20 (183)
B2 3.94 (100)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Oil cooler location/I.D. in. (mm) F 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Dimensions
July 2003 CK.40.A5.22 111
2 CD.44.A5.22 June 2003
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
Accessories
Capacity at HBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G21CS 342 155 338 279 7051 7512 4292 7083 8084 4535 0395
EER at HBP conditions (ASHRAE) Btu/Wh
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
G21CS 85 231 991 232 063 515 896 709 4411 3721 9041
seciveD .giF G21CS
yalergnitratS 2a 0206U711
revoC b 8002N301
042roticapacgnitratS µF c 3205U711
feilerdroC d 4001N301
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
8222
10 11
131214
b
d
a2
c
c
Main windingStart winding
Winding protector
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G21CS 612 884 937 168 5331 1191 8852 7633 0524 0374 6325
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
G21CS 73.0 26.0 97.0 68.0 01.1 33.1 55.1 67.1 79.1 70.2 71.2
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G21CS 751 212 252 962 823 983 154 615 185 516 946
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G21CS 24.4 65.4 07.4 67.4 10.5 13.5 66.5 50.6 94.6 27.6 79.6
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G21CS 55.1 06.2 13.3 16.3 95.4 55.5 84.6 83.7 72.8 17.8 41.9
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G21CS 83.1 03.2 39.2 02.3 70.4 19.4 37.5 35.6 13.7 96.7 70.8
Test conditions1. Condensing temperature2. Ambient and suction gas temp.3. Liquid temperatureFan cooling F
1, 115V 60Hz
ASHRAE EN 12900/CECOMAF1. LBP 130°F (54,4°C) 55°C (131°F)2. 90°F (32°C) 32°C (90°F)3. 90°F (32°C) 55°C (131°F)1. HBP 130°F (54,4 °C)2. 95°F (35°C)3. 115°F (46°C)
112 CK.40.A5.22 July 2003
June 2003 CG.44.A2.22 1
Data Sheet (Replaces CG.44.A1.22)
SC15GUniversal CompressorR134a115V 60Hz
Design
Displacement cu.in. (cm3) 0.93 (15.30)
Oil quantity fl.oz. (cm3) 20.3 (600)
Maximum refrigerant charge oz. (g) 45.5 (1300)
Free gas vol. in compressor housing fl.oz. (cm3) 49.4 (1460)
Weight without electrical equipment lbs. (kg) 27.7 (12.6)
Motor
Motor size watt 540
LRA (rated after 4 sec.UL984) HST A 42.0
Cut-in current HST A 42.0
Resistance, main and start winding (77°F) Ω 1.0/4.3
Approvals UL984/CSA-C22.2
104G
7550
SC15G
8319
-3
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
SC15G115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8319
-4S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
B A
10.04"(255)
D C
E
8256
B2
B1
0.12
"(3)
8.58"(218)
ø "(0.63 16) ø0.75"(19)
6.69"(170)
7.01"(178)
8.03"(204)
6.50"(165)
7.32"(186)
2.76
"(70
)
5.91
" (15
0)
1.38
" (35
)4"
(101
.6)
5"(1
27)
5"(127)
ø0.38"(9.7)
5.94
"(15
1)
4.21"(107)
4.53"(115)
2.17
"(55
)
37° 37°
2.17
" (55
)
2.48
"(63
)
4.21"(107)
2.48
"(63
)
1.18"(30)
0.59"(15)
F
Application LBP/HBP
Evaporating temperature range °F (°C) -31 to 50 (-35 to 10)
Voltage range V/Hz 103 - 127 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) O/F1
Application
Compressor (CU-plated steel connectors) SC15G
Codenumber 104G7550
Codenumber compressor with oil cooler 104G7560
General
Height in. (mm) A 8.23 (209)
B 8.00 (203)
B1 7.20 (183)
B2 3.94 (100)
Suction connector location/I.D. in. (mm) C 0.320-0.327 (8.2±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Oil cooler location/I.D. in. (mm) F 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 80
Dimensions
July 2003 CK.40.A5.22 113
2 CG.44.A2.22 June 2003
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
Accessories
Capacity at HBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G51CS 554 087 8801 1421 7381 0752 0443 8444 5955 2226 4886
EER at HBP conditions (ASHRAE) Btu/Wh
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
G51CS 901 781 062 792 934 416 128 0601 1331 9741 5361
8222
10 11
131214
b
d
a2
c
c
Main windingStart winding
Winding protector
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G51CS 304 296 569 0011 8261 6722 5403 4393 5494 6945 8706
C°\.pmoCF°\.pmoC
4.43-03-
9.82-02-
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
G51CS 26.0 47.0 58.0 09.0 80.1 62.1 54.1 46.1 38.1 39.1 30.2
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G51CS 571 252 603 923 804 684 665 546 627 667 708
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G51CS 54.4 07.4 19.4 20.5 04.5 58.5 53.6 19.6 25.7 48.7 81.8
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G51CS 06.2 01.3 65.3 77.3 15.4 82.5 80.6 98.6 17.7 21.8 35.8
F°\.pmoCC°\.pmoC
03-4.43-
02-9.82-
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
G51CS 13.2 57.2 51.3 43.3 99.3 86.4 83.5 01.6 18.6 71.7 45.7
Test conditions1. Condensing temperature2. Ambient and suction gas temp.3. Liquid temperatureFan cooling F
1, 115V 60Hz
ASHRAE EN 12900/CECOMAF1. LBP 130°F (54,4°C) 55°C (131°F)2. 90°F (32°C) 32°C (90°F)3. 90°F (32°C) 55°C (131°F)1. HBP 130°F (54,4 °C)2. 95°F (35°C)3. 115°F (46°C)
seciveD .giF G51CS
yalergnitratS 2a 0206U711
revoC b 8002N301
042roticapacgnitratS µF c 3205U711
feilerdroC d 4001N301
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
114 CK.40.A5.22 July 2003
June 2003 CG.44.H3.22 1
Data Sheet (Replaces CG.42.H2.22)
SC18GUniversal CompressorR134a115V 60Hz
Design
Displacement cu.in. (cm3) 1.08 (17.69)
Oil quantity fl.oz. (cm3) 20.3 (600)
Maximum refrigerant charge oz. (g) 45.5 (1300)
Free gas vol. in compressor housing fl.oz. (cm3) 49.4 (1460)
Weight without electrical equipment lbs. (kg) 30.2 (13.7)
Motor
Motor size watt 755
LRA (rated after 4 sec.UL984) HST A 53.0
Cut-in current HST A 53.0
Resistance, main and start winding (77°F) Ω 0.7/2.9
Approvals UL984/CSA-C22.2
104G
7800
SC18G
8319
-5
DANFOSS COMPRESSORS
Barcode onwhite background
Green background
Blue stripe
ApplicationR134a
R
SC18G115V-60Hz1PHTHERMALLYPROTECTEDApproval mark
8319
-6S = Static cooling normally sufficientO = Oil coolingF1 = Fan cooling 1.5 m/s
(compressor compartment temp.equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
B A
10.43"(265)
D C
E
8432
B2
B1
0.12
"(3)
8.58"(218)
ø "(0.63 16) ø0.75"(19)
6.69"(170)
7.01"(178)
8.03"(204)
6.50"(165)
7.32"(186)
2.76
"(70
)
5.91
" (15
0)
1.38
" (35
)4"
(101
.6)
5"(1
27)
5"(127)
ø0.38"(9.7)
5.94
"(15
1)
4.21"(107)
4.53"(115)
2.17
"(55
)
37° 37°
2.17
"(55
)4.21"(107)
2.48
"(63
)
2.34
"(5
9.5)
Application LBP/HBP
Evaporating temperature range °F (°C) -13 to 59 (-25 to 15)
Voltage range V/Hz LBP: 95 - 135 /60
MBP: 95 - 135 /60
HBP: 103 - 127 /60
Motor type CSIR
Max. ambient temperature °F (°C) 110 (43)
Comp. cooling at
max. ambient temperature 110°F (43°C) F2
Application
Compressor (CU-plated steel connectors) SC18G
Codenumber 104G7800
General
Height in. (mm) A 8.62 (219)
B 8.39 (213)
B1 7.60 (193)
B2 4.33 (110)
Suction connector location/I.D. in. (mm) C 0.387-0.385 (9.7±0.09)
Process connector location/I.D. in. (mm) D 0.252-0.259 (6.5±0.09)
Discharge connector location/I.D. in. (mm) E 0.252-0.259 (6.5±0.09)
Compressors on a pallet pcs. 60
Dimensions
July 2003 CK.40.A5.22 115
2 CG.44.H3.22 June 2003
Capacity (EN 12900/CECOMAF) watt
Capacity at LBP conditions (ASHRAE) Btu/h
Power consumption watt
Current consumption A
COP (EN 12900/CECOMAF) W/W
EER at LBP conditions (ASHRAE) Btu/Wh
Accessories
Capacity at HBP conditions (ASHRAE) Btu/h
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G81CS 2411 7531 2112 2592 8093 8005 5826 9996 8677 8039
EER at HBP conditions (ASHRAE) Btu/Wh
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
5195
G81CS 462 513 594 596 129 1811 1841 8461 9281 7812
8433
c
ba2
f
h
1
a2
5
4
2
1
c
M
Thermostat
Start winding
Motor protector
S
C
R
Main winding
R
C
S
Test conditions1. Condensing temperature2. Ambient and suction gas temp.3. Liquid temperatureFan cooling F
2, 115V 60Hz
ASHRAE EN 12900/CECOMAF1. LBP 130°F (54,4°C) 55°C (131°F)2. 90°F (32°C) 32°C (90°F)3. 90°F (32°C) 55°C (131°F)1. HBP 130°F (54,4 °C)2. 95°F (35°C)3. 115°F (46°C)
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G81CS 5101 6021 7781 2262 9643 3444 0755 0026 8786 3328
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G81CS 473 404 405 995 196 087 868 219 659 5301
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G81CS 65.6 17.6 42.7 08.7 14.8 50.9 27.9 70.01 34.01 11.11
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G81CS 60.3 53.3 91.4 39.4 66.5 24.6 42.7 76.7 31.8 99.8
F°\.pmoCC°\.pmoC
31-52-
01-3.32-
08.71-
012.21-
027.6-
031.1-
044.4
542.7
0501
9551
G81CS 27.2 89.2 37.3 83.4 20.5 07.5 24.6 08.6 02.7 59.7
C°\.pmoCF°\.pmoC
52-31-
3.32-01-
8.71-0
2.21-01
7.6-02
1.1-03
4.404
2.754
0105
5195
G81CS 17.0 97.0 99.0 61.1 43.1 15.1 07.1 08.1 19.1 11.2
seciveD .giF G81CS
yalergnitratS 2a 1447-711
014roticapacgnitratS µF c 8205U711
revoC bfostrap
rosserpmoc
)1201U711(
rotcetorP f )2123U711(
redlohrotcetorP h )8340U711(
seirosseccagnitnuoMrosserpmocenoroftniojtloB
seititnauqnitniojtloBseititnauqnino-panS
)mm(.niØ5/8 )61(5/8 )61(5/8 )61(
7191-8118191-8119191-811
CK.40.A5.22 Produced by Danfoss 03.07
The Danfoss product programmefor the refrigeration industry contains:
Compressors for Refrigeration and Air ConditioningA wide range of hermetic reciprocating compressors and scroll compressors aswell as aircooled condensing units. The product range is applied in air conditioningunits, water chillers and commercial refrigeration systems.
Refrigeration and Air Conditioning ControlsWith our full product range we cover all the requirements for mechanical andelectronically controlled refrigeration systems. The functions cover: control, safety,system protection and monitoring. Our products are applied for all commercial-and industrial refrigeration applications as well as for air conditioning.
Appliance ControlsFor the regulation of refrigeration appliances and freezers Danfoss supply a CFC-free product range of electromechanical thermostats for refrigerators andelectromechanical thermostats for refrigerators and freezers produced accordingto customer specification; Hermetic valves for refrigerator/freezer combinationsand for energy saving applications; Service thermostats – for all refrigerating andfreezing appliances.
Compressors for Refrigerators and FreezersHermetic compressors and fan-cooled condensing units for householdrefrigeration units such as refrigerators and freezers, and for commercial installa-tions such as sales counters and bottle coolers. Compressors for heating pumpsystems. 12 and 24 V compressors for refrigerators and freezers in commercialvehicles, buses, and boats.
w w w . d a n f o s s . c o m / c o m p r e s s o r s
Top Related