VINESTER ®
CHEMICAL RESISTANCE
120-5001
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001 Page 1 of 18
Rough PinholeUndercut
Problem:Uneven welds
Problem:Points of failuredue to thin spotsin coating
Solution:Carefully andfully coat
Coating
Solution:Grind smooth
Problem:Gaps betweenplates, coatingcan not cover
Solution:Continuous welds
Problem:Gaps between plates, coating can not cover
Solution:Continuous welds
Problem:Sharp surface contours create thin spots in coating
CoatingSolution:Round the contours
Problem:Skip welding creates gaps that coating can not cover
Solution:Continuous welds
Problem:Skip welding creates gaps that coating can not cover
Solution:Continuous welds
2 channels back to back
COMMON PROBLEM AREAS FOR COATINGS AND SOLUTIONS
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001 Page 2 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
1, 1, 1-Trichloroethane(Trichloroethane)
120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Acetaldehyde 140°F (60°C)
Acetic Acid
5% 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)
10% 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)
30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Acetic Acid, Glacial 120°F (49°C) 120°F (49°C) 120°F (49°C)
Acetic Anhydride
100% 120°F (49°C) 120°F (49°C) 120°F (49°C)
Acetone NT NT NT NT NT
Acetonitrile
20% 120°F (49°C)
100% NR NR NR NR NR
Acrylic Acid
25% 120°F (49°C) 120°F (49°C) 120°F (49°C)
Acrylonitrile
100% 120°F (49°C)
Activated Carbon 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Adipic Acid (Dry) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Allyl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C)
Aluminum Chloride
25% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Aluminum Hydroxide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Aluminum Nitrate
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ammonium Bisulfite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ammonium Carbonate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 3 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
Ammonium Chloride
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Ammonium Fluoride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ammonium Hydroxide
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ammonium Lauryl Sulfate
30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ammonium Nitrate
38% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ammonium Nitrite
50% NR NR NR NR NR
Ammonium Perchlorate (Dry) NR NR NR NR NR
Ammonium Persulfate
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ammonium Phosphate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ammonium Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ammonium Sulfide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ammonium Sulfite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Amyl Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Aniline
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Animal Fats NR NR NR NR NR
Aqua Ammonia 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Aqua Regia 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Aviation Gas NR NR NR NR NR
Barium Chloride
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 4 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Barium Hydroxide
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Barium Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Barium Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Barium Sulfide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Beer (non-food contact) ¹ NR NR NR NR NR
Benzene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Benzene Sulfonic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Benzoic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Benzoyl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Benzyl Alcohol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Benzyl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Borax 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Boric Acid
5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Butyl Acrylate 120°F (49°C) 120°F (49°C) 120°F (49°C)
Butyl Amine 120°F (49°C)
Butyric Acid 120°F (49°C) 120°F (49°C) 120°F (49°C)
Cadmium Bromide
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Cadmium Chloride
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Cadmium Plating (Cyanide) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Calcium Bisulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Calcium Bromide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Calcium Carbonate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Calcium Chloride
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 5 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Calcium Hydroxide(Lime Slurry)
30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Calcium Hypochlorite
5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Calcium Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Calcium Nitrite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Calcium Oxide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Calcium Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Calcium Sulfite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Caprolactam 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Carbon Disulfide 120°F (49°C) 120°F (49°C) 120°F (49°C)
Carbon Tetrachloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Castor Oil 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Chlorine Dioxide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Chlorobenzene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Chloroform 120°F (49°C)
Chlorosulfonic Acid NR NR NR NR NR
Chromic Acid
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Citric Acid
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Coal (high and low sulfur) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Cola (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Copper Acetate
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 6 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
Copper Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Copper Sulfate
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Copper Sulfate (dry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Corn Mash Solution (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Corn Oil (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Cottonseed Oil (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Cresylic Acid NR NR NR NR NR
Crude Oil (Sour) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)
Crude Oil (Sweet) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)
Cumene Hydroperoxide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Cuprous Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Cyclohexane NR NR NR NR NR
Cyclohexanol NR NR NR NR NR
Cyclohexanone NR NR NR NR NR
Cyclohexlamine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Dextrose 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Diacetone Alcohol NR NR NR NR NR
Dichloracetic Acid
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Diethanolamine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Diethylene Glycol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Diethylene Glycol Monobutyl Ether(Butyl "Carbitol")
120°F (49°C) 120°F (49°C) 120°F (49°C)
Diethylenetriamine 140°F (60°C) 140°F (60°C)
Dimethyl Formamide 140°F (60°C) 140°F (60°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 7 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
Dimethyl Sulfoxide
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Dioctyl Phthalate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Dipropylene Glycol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Dodecyl Alcohol(Lauryl Alcohol)
120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ethanol(Ethyl Alcohol, Denatured Alcohol)
120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ethanolamine 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ethyl Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ethyl Benzene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ethylamine
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ethylene Glycol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ethylene Glycol Monobutyl Ether(Butyl "Cellosolve")
120°F (49°C) 120°F (49°C) 120°F (49°C)
Ethylene Glycol Monobutyl EtherAcetate(Butyl "Cellosolve" Acetate)
120°F (49°C) 120°F (49°C) 120°F (49°C)
Ethylenediamine
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Fatty Acids (Greater than C6) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ferric Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ferric Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ferric Sulfate
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Ferrous Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Fluorosilicic Acid(Hydrofluorosilicic Acid)
10% 120°F (49°C) 120°F (49°C) 120°F (49°C)
Formaldehyde
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 8 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
37% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Formic Acid
10% 100°F (38°C) 100°F (38°C)
Fructose (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Furan 120°F (49°C)
Furfural
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Furfuryl Alcohol 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasoline (Unleaded) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Glucose (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Glycerin 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Glycolic Acid
70% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gold Plating Solution 120°F (49°C) 120°F (49°C) 120°F (49°C)
Grape Juice 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Guar Gum (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Heptane 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Hexane 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Hexanol 120°F (49°C) 120°F (49°C) 120°F (49°C)
Hydraulic Fluid(Hydraulic Oil)
120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Hydrobromic Acid
48% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Hydrochloric Acid
5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
28% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 9 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
37% 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Hydrofluoric Acid
10% 120°F (49°C) 120°F (49°C) 120°F (49°C)
20% 120°F (49°C) 120°F (49°C) 120°F (49°C)
Hydrofluoroboric Acid
62% 120°F (49°C) 120°F (49°C) 120°F (49°C)
Hydrogen Peroxide
30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Hydrogen Sulfide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Iodine
5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Isobutyl Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C)
Isobutyl Alcohol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Isopropyl Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C)
Isopropyl Alcohol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Jet A Fuel 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
JP-4 Aviation Fuel 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
JP-5 Aviation Fuel 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Kaolin 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Kerosene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Lactic Acid
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
85% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Lauryl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Lead Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Levulinic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Linseed Oil 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Lithium Bromide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 10 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
Lithium Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Lithium Hydroxide (saturated) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Lubricating Oil (SAE 5W-40, et al)(Motor Oil)
120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Magnesium Bisulfite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Magnesium Chloride
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Magnesium Hydroxide
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Magnesium Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Maleic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Maleic Anhyride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Mercuric Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Mercury 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Methacrylic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Methane Gas 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Methanol(Methyl Alcohol)
120°F (49°C) 120°F (49°C) 120°F (49°C)
Methyl Acetate
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Methyl Acrylate 120°F (49°C) 120°F (49°C)
Methyl Amyl Ketone 120°F (49°C)
Methyl Ethyl Ketone 120°F (49°C) 120°F (49°C) 120°F (49°C)
Methyl Isobutyl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Methyl Isobutyl Ketone 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Methyl Methacrylate 120°F (49°C) 120°F (49°C) 120°F (49°C)
Methyl Propyl Ketone 120°F (49°C) 120°F (49°C) 120°F (49°C)
Methyl tert-Butyl Ether (MTBE) NR NR NR NR NR
Methylene Chloride 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 11 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
Milk (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Mineral Oil 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Mineral Spirits NR NR NR NR NR
Molasses (non-food contact) ¹ NR NR NR NR NR
Morpholine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Mustard (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Naphtha NR NR NR NR NR
Naphthalene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Naphthenic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C)
n-Butyl Acetate(Butyl Acetate)
120°F (49°C) 120°F (49°C) 120°F (49°C)
n-Butyl Alcohol (1-Butanol)(Butanol (Normal))
120°F (49°C) 120°F (49°C) 120°F (49°C)
n-Decyl Alcohol(Decyl Alcohol (1-Decanol))
NR NR NR NR NR
Nickel Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Nitric Acid
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 100°F (38°C)
25% 140°F (60°C)
70% 120°F (49°C)
Nitrobenzene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
n-Methyl-2-Pyrolidone 120°F (49°C) 120°F (49°C) 120°F (49°C)
n-Octyl Alcohol(Octanol)
NR NR NR NR NR
n-Propyl Alcohol(Propyl Alcohol)
NR NR NR NR NR
Octane NR NR NR NR NR
Oleic Acid NR NR NR NR NR
Oxalic Acid
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 12 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
Ozone <2 ppm 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Palm Oil NR NR NR NR NR
Pentane NR NR NR NR NR
Perchloroethylene NR NR NR NR NR
Petroleum Ether NR NR NR NR NR
Phosphoric Acid
5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
25% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
43% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
85% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Phosphorous 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Phosphorous Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Phthalic Acid (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Picric Acid (conc) 120°F (49°C)
Pine Oil 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Polyethylene Glycol NR NR NR NR NR
Polypropylene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Polystyrene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Polytetrafluoroethane 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Polyvinyl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potash Ore 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potassium Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potassium Bromide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potassium Carbonate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potassium Chlorate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potassium Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potassium Cyanide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 13 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
Potassium Ferricyanide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Potassium Fluoride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potassium Hydroxide
50% NR NR NR NR NR
Potassium Iodide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potassium Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potassium Permanganate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potassium Persulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Potassium Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Propionic Acid
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
100% 120°F (49°C) 120°F (49°C) 120°F (49°C)
Propylene Glycol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Pulpmill (Black Liquor) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Pulpmill (Green Liquor) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Pulpmill (White Liquor) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Pyridine
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Silver Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Aluminate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Bisulfate
30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Bisulfite
38% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Borate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Bromide (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Carbonate (sat'd) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 14 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
Sodium Carbonate (slurry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Sodium Chlorate
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Chloride (sat'd)(Brine, Water (Sea), Salt Brine)
120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Chlorite (>6 pH) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Chromate
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Cyanide
18% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Dichromate (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Fluoride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Formate
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Hydrosulfide
72% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Hydrosulfite
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Hydroxide(Caustic Soda)
50% 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Hypochlorite(Bleach)
5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
13% 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Lauryl Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Nitrate
40% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Nitrate (dry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 15 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
Sodium Oxalate
1% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Sodium Phosphate
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Silicate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Sulfate
6% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Sulfide (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Sulfite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Thiosulfate
30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Tripolyphosphate
1% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Soybean Oil (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Stannic Chloride (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Stannous Chloride (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Stearic Acid (conc) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Styrene 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sulfite Liquor (paper industry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sulfur Dioxide (dry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sulfur Dioxide (wet) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sulfuric Acid(Sulphuric Acid)
5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
70% 120°F (49°C) 120°F (49°C) 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 16 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
98% 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Sulfurous Acid
10% 120°F (49°C) 120°F (49°C) 120°F (49°C)
Tall Oil 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Tannic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Tartaric Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Tetrachloroethylene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Tetrahydrofuran 120°F (49°C)
Toluenesulfonic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Transmission Fluid NR NR NR NR NR
Trichloroethylene NR NR NR NR NR
Trichlorofluoroethane NR NR NR NR NR
Triethanolamine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Triethylamine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Triethylenetetramine 120°F (49°C) 120°F (49°C) 120°F (49°C)
Trisodium Phosphate(Sodium Phosphate (Tribasic))
20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Turpentine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Urea
50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Urea Ammonium Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Vegetable Oil (non-food contact) ¹ NR NR NR NR NR
Vinegar (non-food contact) ¹ NR NR NR NR NR
Vinyl Trichloride NR NR NR NR NR
Water (deionized, non-potable)(Water (Demineralized, Non-potable))
120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Water (distilled, non-potable) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Water (fresh, non-potable) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 17 of 18
¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.
² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
CHEMICAL RESISTANCE
VINESTER ® | 120-5001
Intended Use (Maximum Temperature Listed)
Chemical OccasionalContact
FrequentContact
SecondaryContainment
CargoImmersion
ImmersionService
Xylene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
© July 18, 2019 by Tnemec Company, Inc. Chem120-5001
Zinc Bromide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Zinc Chloride
40% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Zinc Phosphate (dry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Zinc Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.
Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com
Page 18 of 18
Top Related