VINESTER ®

CHEMICAL RESISTANCE

120-5001

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001 Page 1 of 18

Rough PinholeUndercut

Problem:Uneven welds

Problem:Points of failuredue to thin spotsin coating

Solution:Carefully andfully coat

Coating

Solution:Grind smooth

Problem:Gaps betweenplates, coatingcan not cover

Solution:Continuous welds

Problem:Gaps between plates, coating can not cover

Solution:Continuous welds

Problem:Sharp surface contours create thin spots in coating

CoatingSolution:Round the contours

Problem:Skip welding creates gaps that coating can not cover

Solution:Continuous welds

Problem:Skip welding creates gaps that coating can not cover

Solution:Continuous welds

2 channels back to back

COMMON PROBLEM AREAS FOR COATINGS AND SOLUTIONS

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001 Page 2 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

1, 1, 1-Trichloroethane(Trichloroethane)

120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Acetaldehyde 140°F (60°C)

Acetic Acid

5% 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)

10% 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)

30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Acetic Acid, Glacial 120°F (49°C) 120°F (49°C) 120°F (49°C)

Acetic Anhydride

100% 120°F (49°C) 120°F (49°C) 120°F (49°C)

Acetone NT NT NT NT NT

Acetonitrile

20% 120°F (49°C)

100% NR NR NR NR NR

Acrylic Acid

25% 120°F (49°C) 120°F (49°C) 120°F (49°C)

Acrylonitrile

100% 120°F (49°C)

Activated Carbon 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Adipic Acid (Dry) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Allyl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C)

Aluminum Chloride

25% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Aluminum Hydroxide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Aluminum Nitrate

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ammonium Bisulfite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ammonium Carbonate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 3 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

Ammonium Chloride

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Ammonium Fluoride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ammonium Hydroxide

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ammonium Lauryl Sulfate

30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ammonium Nitrate

38% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ammonium Nitrite

50% NR NR NR NR NR

Ammonium Perchlorate (Dry) NR NR NR NR NR

Ammonium Persulfate

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ammonium Phosphate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ammonium Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ammonium Sulfide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ammonium Sulfite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Amyl Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Aniline

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Animal Fats NR NR NR NR NR

Aqua Ammonia 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Aqua Regia 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Aviation Gas NR NR NR NR NR

Barium Chloride

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 4 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Barium Hydroxide

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Barium Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Barium Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Barium Sulfide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Beer (non-food contact) ¹ NR NR NR NR NR

Benzene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Benzene Sulfonic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Benzoic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Benzoyl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Benzyl Alcohol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Benzyl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Borax 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Boric Acid

5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Butyl Acrylate 120°F (49°C) 120°F (49°C) 120°F (49°C)

Butyl Amine 120°F (49°C)

Butyric Acid 120°F (49°C) 120°F (49°C) 120°F (49°C)

Cadmium Bromide

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Cadmium Chloride

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Cadmium Plating (Cyanide) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Calcium Bisulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Calcium Bromide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Calcium Carbonate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Calcium Chloride

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 5 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Calcium Hydroxide(Lime Slurry)

30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Calcium Hypochlorite

5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Calcium Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Calcium Nitrite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Calcium Oxide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Calcium Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Calcium Sulfite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Caprolactam 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Carbon Disulfide 120°F (49°C) 120°F (49°C) 120°F (49°C)

Carbon Tetrachloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Castor Oil 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Chlorine Dioxide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Chlorobenzene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Chloroform 120°F (49°C)

Chlorosulfonic Acid NR NR NR NR NR

Chromic Acid

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Citric Acid

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Coal (high and low sulfur) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Cola (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Copper Acetate

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 6 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

Copper Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Copper Sulfate

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Copper Sulfate (dry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Corn Mash Solution (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Corn Oil (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Cottonseed Oil (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Cresylic Acid NR NR NR NR NR

Crude Oil (Sour) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)

Crude Oil (Sweet) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)

Cumene Hydroperoxide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Cuprous Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Cyclohexane NR NR NR NR NR

Cyclohexanol NR NR NR NR NR

Cyclohexanone NR NR NR NR NR

Cyclohexlamine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Dextrose 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Diacetone Alcohol NR NR NR NR NR

Dichloracetic Acid

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Diethanolamine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Diethylene Glycol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Diethylene Glycol Monobutyl Ether(Butyl "Carbitol")

120°F (49°C) 120°F (49°C) 120°F (49°C)

Diethylenetriamine 140°F (60°C) 140°F (60°C)

Dimethyl Formamide 140°F (60°C) 140°F (60°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 7 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

Dimethyl Sulfoxide

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Dioctyl Phthalate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Dipropylene Glycol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Dodecyl Alcohol(Lauryl Alcohol)

120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ethanol(Ethyl Alcohol, Denatured Alcohol)

120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ethanolamine 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ethyl Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ethyl Benzene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ethylamine

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ethylene Glycol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ethylene Glycol Monobutyl Ether(Butyl "Cellosolve")

120°F (49°C) 120°F (49°C) 120°F (49°C)

Ethylene Glycol Monobutyl EtherAcetate(Butyl "Cellosolve" Acetate)

120°F (49°C) 120°F (49°C) 120°F (49°C)

Ethylenediamine

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Fatty Acids (Greater than C6) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ferric Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ferric Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ferric Sulfate

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Ferrous Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Fluorosilicic Acid(Hydrofluorosilicic Acid)

10% 120°F (49°C) 120°F (49°C) 120°F (49°C)

Formaldehyde

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 8 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

37% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Formic Acid

10% 100°F (38°C) 100°F (38°C)

Fructose (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Furan 120°F (49°C)

Furfural

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Furfuryl Alcohol 120°F (49°C) 120°F (49°C) 120°F (49°C)

Gasoline (Unleaded) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Glucose (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Glycerin 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Glycolic Acid

70% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Gold Plating Solution 120°F (49°C) 120°F (49°C) 120°F (49°C)

Grape Juice 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Guar Gum (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Heptane 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Hexane 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Hexanol 120°F (49°C) 120°F (49°C) 120°F (49°C)

Hydraulic Fluid(Hydraulic Oil)

120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Hydrobromic Acid

48% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Hydrochloric Acid

5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

28% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 9 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

37% 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Hydrofluoric Acid

10% 120°F (49°C) 120°F (49°C) 120°F (49°C)

20% 120°F (49°C) 120°F (49°C) 120°F (49°C)

Hydrofluoroboric Acid

62% 120°F (49°C) 120°F (49°C) 120°F (49°C)

Hydrogen Peroxide

30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Hydrogen Sulfide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Iodine

5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Isobutyl Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C)

Isobutyl Alcohol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Isopropyl Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C)

Isopropyl Alcohol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Jet A Fuel 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

JP-4 Aviation Fuel 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

JP-5 Aviation Fuel 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Kaolin 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Kerosene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Lactic Acid

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

85% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Lauryl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Lead Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Levulinic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Linseed Oil 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Lithium Bromide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 10 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

Lithium Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Lithium Hydroxide (saturated) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Lubricating Oil (SAE 5W-40, et al)(Motor Oil)

120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Magnesium Bisulfite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Magnesium Chloride

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Magnesium Hydroxide

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Magnesium Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Maleic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Maleic Anhyride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Mercuric Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Mercury 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Methacrylic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Methane Gas 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Methanol(Methyl Alcohol)

120°F (49°C) 120°F (49°C) 120°F (49°C)

Methyl Acetate

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Methyl Acrylate 120°F (49°C) 120°F (49°C)

Methyl Amyl Ketone 120°F (49°C)

Methyl Ethyl Ketone 120°F (49°C) 120°F (49°C) 120°F (49°C)

Methyl Isobutyl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Methyl Isobutyl Ketone 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Methyl Methacrylate 120°F (49°C) 120°F (49°C) 120°F (49°C)

Methyl Propyl Ketone 120°F (49°C) 120°F (49°C) 120°F (49°C)

Methyl tert-Butyl Ether (MTBE) NR NR NR NR NR

Methylene Chloride 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 11 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

Milk (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Mineral Oil 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Mineral Spirits NR NR NR NR NR

Molasses (non-food contact) ¹ NR NR NR NR NR

Morpholine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Mustard (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Naphtha NR NR NR NR NR

Naphthalene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Naphthenic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C)

n-Butyl Acetate(Butyl Acetate)

120°F (49°C) 120°F (49°C) 120°F (49°C)

n-Butyl Alcohol (1-Butanol)(Butanol (Normal))

120°F (49°C) 120°F (49°C) 120°F (49°C)

n-Decyl Alcohol(Decyl Alcohol (1-Decanol))

NR NR NR NR NR

Nickel Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Nitric Acid

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 100°F (38°C)

25% 140°F (60°C)

70% 120°F (49°C)

Nitrobenzene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

n-Methyl-2-Pyrolidone 120°F (49°C) 120°F (49°C) 120°F (49°C)

n-Octyl Alcohol(Octanol)

NR NR NR NR NR

n-Propyl Alcohol(Propyl Alcohol)

NR NR NR NR NR

Octane NR NR NR NR NR

Oleic Acid NR NR NR NR NR

Oxalic Acid

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 12 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

Ozone <2 ppm 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Palm Oil NR NR NR NR NR

Pentane NR NR NR NR NR

Perchloroethylene NR NR NR NR NR

Petroleum Ether NR NR NR NR NR

Phosphoric Acid

5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

25% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

43% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

85% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Phosphorous 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Phosphorous Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Phthalic Acid (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Picric Acid (conc) 120°F (49°C)

Pine Oil 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Polyethylene Glycol NR NR NR NR NR

Polypropylene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Polystyrene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Polytetrafluoroethane 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Polyvinyl Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potash Ore 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potassium Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potassium Bromide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potassium Carbonate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potassium Chlorate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potassium Chloride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potassium Cyanide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 13 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

Potassium Ferricyanide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Potassium Fluoride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potassium Hydroxide

50% NR NR NR NR NR

Potassium Iodide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potassium Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potassium Permanganate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potassium Persulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Potassium Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Propionic Acid

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

100% 120°F (49°C) 120°F (49°C) 120°F (49°C)

Propylene Glycol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Pulpmill (Black Liquor) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Pulpmill (Green Liquor) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Pulpmill (White Liquor) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Pyridine

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Silver Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Acetate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Aluminate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Bisulfate

30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Bisulfite

38% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Borate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Bromide (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Carbonate (sat'd) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 14 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

Sodium Carbonate (slurry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Sodium Chlorate

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Chloride (sat'd)(Brine, Water (Sea), Salt Brine)

120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Chlorite (>6 pH) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Chromate

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Cyanide

18% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Dichromate (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Fluoride 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Formate

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Hydrosulfide

72% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Hydrosulfite

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Hydroxide(Caustic Soda)

50% 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Hypochlorite(Bleach)

5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

13% 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Lauryl Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Nitrate

40% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Nitrate (dry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 15 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

Sodium Oxalate

1% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Sodium Phosphate

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Silicate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Sulfate

6% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Sulfide (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Sulfite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Thiosulfate

30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sodium Tripolyphosphate

1% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Soybean Oil (non-food contact) ¹ 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Stannic Chloride (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Stannous Chloride (all) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Stearic Acid (conc) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Styrene 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sulfite Liquor (paper industry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sulfur Dioxide (dry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sulfur Dioxide (wet) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Sulfuric Acid(Sulphuric Acid)

5% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

10% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

30% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

70% 120°F (49°C) 120°F (49°C) 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 16 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

98% 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Sulfurous Acid

10% 120°F (49°C) 120°F (49°C) 120°F (49°C)

Tall Oil 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Tannic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Tartaric Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Tetrachloroethylene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Tetrahydrofuran 120°F (49°C)

Toluenesulfonic Acid 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Transmission Fluid NR NR NR NR NR

Trichloroethylene NR NR NR NR NR

Trichlorofluoroethane NR NR NR NR NR

Triethanolamine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Triethylamine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Triethylenetetramine 120°F (49°C) 120°F (49°C) 120°F (49°C)

Trisodium Phosphate(Sodium Phosphate (Tribasic))

20% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Turpentine 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Urea

50% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Urea Ammonium Nitrate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Vegetable Oil (non-food contact) ¹ NR NR NR NR NR

Vinegar (non-food contact) ¹ NR NR NR NR NR

Vinyl Trichloride NR NR NR NR NR

Water (deionized, non-potable)(Water (Demineralized, Non-potable))

120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Water (distilled, non-potable) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Water (fresh, non-potable) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 17 of 18

¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only.

² Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

CHEMICAL RESISTANCE

VINESTER ® | 120-5001

Intended Use (Maximum Temperature Listed)

Chemical OccasionalContact

FrequentContact

SecondaryContainment

CargoImmersion

ImmersionService

Xylene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

© July 18, 2019 by Tnemec Company, Inc. Chem120-5001

Zinc Bromide 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Zinc Chloride

40% 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Zinc Phosphate (dry) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

Zinc Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other importantinformation, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in achemical exposure environment until the user has thoroughly read and understood the product information and full project details have beendiscussed with Tnemec Technical Service.

Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com

Page 18 of 18