Catalogo e manuale tecnicoCatalogue and technical manual
Ankor DSCerniera a scomparsa per Ante a BattenteRecessed hinge for Swing Doors
Effegibrevetti | Ankor DS
Per informazioni riguardanti quantità minime ordinabili e colori personalizzati rivolgersi a: [email protected].
For information about minimum order quantities and custom colors please contact: [email protected].
Effegibrevetti | Ankor DS
Cerniera per ante a battente montata a scomparsa all’interno di piani fresati. Progettata per ante con spessore da 18 a 32 mm. È effettuabile la regolazione dell’anta nelle tre dimensioni: orizzontale, verticale e frontale. Sono disponibili squadrette in zama per profili in alluminio.Ankor DS è disponibile in tre versioni:• Ankor DS Lite• Ankor DS Soft è ammortizzata in chiusura• Ankor DS Push è munita di molla al contrario e si abbina
al Push to Open ClickMateriali: Zama, Acciaio, Nylon. Finiture: Nichelata, Nichelata Nera.
Hinge for swing doors mounted recessed into milled panels.Designed for doors from 18 to 32 mm thickness. Horizontal, vertical and frontal positions of the door are adjustable. Zama corner brackets for aluminium profiles are available.Ankor DS is available in three versions:• Ankor DS Lite• Ankor DS Soft is amortized during closing• Ankor DS Push is equipped with a reverse spring and can
be combined with Push to Open ClickMaterials: Zama, Steel, Nylon. Finishings: Nickel Plated, Black Nickel Plated.
Ankor DS
Spessore anta da 18 a 32 mmDoor’s thickness from 18 to 32 mm
Angolo d’apertura 103°Door’s opening angle 103°
103°
Regolazione frontale, verticale e laterale dell’antaFrontal, vertical and lateral adjustments
Chiusura ammortizzataSoft closing
Anta fino a 60 cmDoor’s width up to 60 mm
hp
Effegibrevetti | Ankor DS
Spazio occorrente per l’apertura dell’antaRequired space for door’s opening
103°
12
L
D
T
L (D = 3)
L (D = 4)
L (D = 5)
L (D = 6)
-
T = 18 T = 20 T = 22 T = 24 T = 26 T = 28 T = 30 T = 32
0,2 0,5 0,9 1,4 2,1 3,1 4,7
- 0,2 0,5 0,9 1,4 2 2,9 4,2
- 0,2 0,5 0,8 1,3 2 2,8 3,9
- 0,2 0,5 0,8 1,3 1,9 2,7 3,7
RegolazioniAdjustments
Regolazione verticaleVertical adjustment
Regolazione frontaleFront adjustment
Regolazione lateraleLateral adjustment
± 2
± 1,5
+ 2-0,5
Effegibrevetti | Ankor DS
Foratura antaDoor’s drilling
Foratura base e cappelloTop & bottom panel drilling
56
D10 46
12,5
6
12 R 4
R 4
51
3
15
29
,5
35
,5
11
24
,5+0
,2 +0
6
Y = X - W
A = (17 + D) - S
W = X - Y
X = W + Y
47,5R 5
57,5
57,5
67,5
A
X
10
42
S
39
3
X
W (2
,5 m
in)
Y
W (2
,5 m
in)
Effegibrevetti | Ankor DS
CoprivitiScrews cover
Foratura anta alluminioAluminium door drilling
50DSQF255SX30
50DSQF255DX30
Il supporto per anta in alluminio è un accessorio opzionaleThe support for aluminum door's connection is an optional accessory
ATTENZIONE - WARNING
!
12,5
6
R4
R4
6
412
9
10
35
,5
56
4
Effegibrevetti S.r.l.
Via Cava Trombetta 17/2520090 Segrate Milano Italy
Tel +39 02 26921838Fax +39 02 26921737
Il catalogo di Effegibrevetti contiene:
• Aperture a Ribalta• Aperture a Pacchetto • Aperture Verticali • Aperture Oblique• Apertura a Pantografo• Aperture Scorrevoli Complanari• Aperture Scorrevoli• Cerniere• Bussole a Espansione• Giunti Orizzontali• Giunti Verticali• Giunti a Scatto• Reggiripiani• Livellatori• Push to Open
*Effegibrevetti ha la facoltà di apportare ai prodotti tutte le modifiche e migliorie tecniche.
Effegibrevetti’s catalog contains:
• Flap Openings• Folding Openings• Vertical Openings • Oblique Openings• Pantograph Openings• Coplanar Sliding Mechanisms• Standard Sliding Mechanisms• Hinges• Spreading Dowels• Horizontal Fittings• Vertical Fittings• Snap Fittings• Shelf Supports• Levellers• Push to Open
*Effegibrevetti reserve the right to make changes and technical improvements to its products.
V. 2
017
Rev
. 1